PRODUCT DESCRIPTION AK 18 - M26™ DURABAK - M26durabakm26.com/flyer1.pdf · DURABAK - M26™ and...
1
INDUSTRIES, INC. We put safety at your feet! INDUSTRIES, INC. We put safety at your feet! 1542 Jefferson Street Teaneck NJ 07666 Tel: 201-836-0733 Fax: 201-836-5220 www.DurabakM26.com Email: [email protected] PRODUCT DESCRIPTION DURABAK - M26™ and DURABAK 18 - M26™ are tough, one-part, waterproof, polyurethane coatings. They are made with self-contained recycled rubber granules that give them attractive, tough-textured finishes. Once exposed to atmospheric moisture, both coatings undergo a chemical curing process, which changes them from a liquid to a tough polyurethane membrane. They have excellent abrasion and chemical resistance. DURABAK - M26™ and DURABAK 18 - M26™ will chemically bond to most clean and dry surfaces. These include, but are not limited to, metal, concrete, wood, fiberglass, rubber, and most painted surfaces. DURABAK - M26™ (indoor applications) and DURABAK 18 - M26™ (outdoor applications) are applied by a special roller, brush, or spray. Each is available as a smooth, protective coating, as well. DURABAK - M26™ & DURABAK 18 - M26™ ... are flexible polyurethane coatings specified for outdoor weather deck and indoor applications. From serviceability report on nuclear AC carrier USS Theodore Roosevelt: “ ... no rust around pipes, hangars or drains,” ... “no visible rust on any deck surfaces,” ... “coating did not appear to be lifted or delaminated” ... coating was “subjected to heavy use by hard-working, dirty personnel.” From the USS George Washington: “coating ... found to be in excellent condition ... with no deterioration of any kind” ... “no problems or concerns with this deck coating.” ... no complaints concerning the texture of the deck.” DURABAK - M26™ & DURABAK 18 - M26™ manufactured under strict ISO 9001 Standards cut For information about other COTE-L products and CEASEFIRE™ fire retardant technologies, contact COTE-L Industries. For application on: Ship Decks Heads Galleys Ship Passageways Concrete Floors Heavy Equipment Truck Beds Stairs Loading Docks Scaffolding Ramps Gangways Walkways Line Striping Hangar Floors Workboats Bridges Construction Plates Trailers Metal Structures Wooden Floors Pipes Elevator Floors Metal Tanks Catwalks DURABAK - M26 & DURABAK 18 - M26 tm tm
Transcript of PRODUCT DESCRIPTION AK 18 - M26™ DURABAK - M26durabakm26.com/flyer1.pdf · DURABAK - M26™ and...
INDUSTRIES, INC.We put safety at your feet!
INDUSTRIES, INC.We put safety at your feet!
1542 Je�erson Street Teaneck NJ 07666
Tel: 201-836-0733 Fax: 201-836-5220 www.DurabakM26.com
Email: [email protected]
PRODUCT DESCRIPTION
DURABAK - M26™ and DURABAK 18 - M26™ are tough, one-part, waterproof, polyurethane coatings. They are made with self-contained recycled rubber granules that give them attractive, tough-textured finishes. Once exposed to atmospheric moisture, both coatings undergo a chemical curing process, which changes them from a liquid to a tough polyurethane membrane. They have excellent abrasion and chemical resistance.
DURABAK - M26™ and DURABAK 18 - M26™ will chemically bond to most clean and dry surfaces. These include, but are not limited to, metal, concrete, wood, �berglass, rubber, and most painted surfaces.
DURABAK - M26™ (indoor applications) and DURABAK 18 - M26™ (outdoor applications) are applied by a special roller, brush, or spray. Each is available as a smooth, protective coating, as well.
DURABAK - M26™ & DURABAK 18 - M26™
... are �exible polyurethane coatings speci�ed for outdoor weather deck and indoor applications.
From serviceability report on nuclear AC carrier
USS Theodore Roosevelt:
“ ... no rust around pipes, hangars or drains,” ... “no visible rust on any deck surfaces,” ... “coating did not appear to be lifted or delaminated” ... coating was “subjected to heavy use by hard-working, dirty personnel.”
From the USS George Washington:
“coating ... found to be in excellent condition ... with no deterioration of any kind” ... “no problems or concerns with this deck coating.” ... no complaints concerning the texture of the deck.”
DURABAK - M26™ & DURABAK 18 - M26™
manufactured under strict ISO 9001 Standards
cut For information about other COTE-L products and CEASEFIRE™ fire retardant technologies,
contact COTE-L Industries.
For application on:
� Ship Decks � Heads � Galleys Ship Passageways � Concrete Floors �
Heavy Equipment � Truck Beds � Stairs � Loading Docks � Scaffolding �
Ramps � Gangways � Walkways � Line Striping � Hangar Floors �
Workboats � Bridges � Construction Plates � Trailers
Metal Structures � Wooden Floors Pipes � Elevator Floors � Metal Tanks � Catwalks
DURABAK - M26 &DURABAK 18 - M26
tm
tm
