PRODUCT DATASHEET Cute series - Beriled.bizberiled.biz/data/files/Cute-XM-L-Ledil.pdf · XM-L Clear...
Transcript of PRODUCT DATASHEET Cute series - Beriled.bizberiled.biz/data/files/Cute-XM-L-Ledil.pdf · XM-L Clear...
PRODUCT DATASHEETCute serieslast update 10/4/2012
Ordering number
FamilyTypeLEDColorDiameterHeightStyleOptic MaterialHolder MaterialFasteningStatus
C10754_CUTE-3-SS
CuteLensXM-LClear35 mm15 mmRound PMMA - Pin, glue Ready
FWHMEfficiencycd/lmGerber File
19 degrees 91 % 5.280 Available
Pin height 3mm
Ordering number
FamilyTypeLEDColorDiameterHeightStyleOptic MaterialHolder MaterialFasteningStatus
C11333_CUTE-3-SS
CuteLensXM-LClear35 mm15 mmRound PMMA - Pin, glue Ready
FWHMEfficiencycd/lmGerber File
19 degrees 91 % - Available
Ordering number
FamilyTypeLEDColorDiameterHeightStyleOptic MaterialHolder MaterialFasteningStatus
C10755_CUTE-3-M
CuteLensXM-LClear35 mm15 mmRound PMMA - Pin, glue Ready
FWHMEfficiencycd/lmGerber File
25 degrees 90 % 3.510 Available
Location Pin total height 3mm.
Ordering number
FamilyTypeLEDColorDiameterHeightStyleOptic MaterialHolder MaterialFasteningStatus
C11334_CUTE-3-M
CuteLensXM-LClear35 mm15 mmRound PMMA - Pin, glue Ready
FWHMEfficiencycd/lmGerber File
25 degrees 90 % - Available
December 18th 2012 18:31 Copyright Ledil Oy - Subject to change without prior notice - Page 1/3
Ledil Oy Salorankatu 10 24240 SALOFinland
http://www.ledil.com email: [email protected] FAX: +358-2-733 8001
PRODUCT DATASHEETCute serieslast update 10/4/2012
Ordering number
FamilyTypeLEDColorDiameterHeightStyleOptic MaterialHolder MaterialFasteningStatus
C10756_CUTE-3-W
CuteLensXM-LClear35 mm15 mmRound PMMA - Pin, glue Ready
FWHMEfficiencycd/lmGerber File
42 degrees 83 % - Available
Location pin height 1.5mm
NOTE: The typical divergence will be changed by different color, chip size and chip positiontolerance. The typical total divergence is the full angle measured where the luminous intensityis half of the peak value.
December 18th 2012 18:31 Copyright Ledil Oy - Subject to change without prior notice - Page 2/3
Ledil Oy Salorankatu 10 24240 SALOFinland
http://www.ledil.com email: [email protected] FAX: +358-2-733 8001
PRODUCT DATASHEETCute serieslast update 10/4/2012
GENERAL INFORMATION
- Product series especially designed & optimized for XM-L series of LEDs. - Special care taken to make light distribution as uniform as possible.- Lens material optical grade PMMA with high UV and temperature resistance (105 degrees of Celcius / 220degrees of Fahrenheit). Allows use of high current and temperature conditions.
Please find more information about used material from below:http://ledil.fi/sites/default/files/Documents/Technical/Material/PMMA%208N%20UL94_Yellow%20Card.pdfhttp://ledil.fi/sites/default/files/Documents/Technical/Material/PMMA%208N%20PLEXIGLAS-Datasheet.pdf
- Fastening to PCB with appropriate adhesive. By clicking link below you can find Ledil recommended glueoptions.http://www.ledil.com/datasheets/DataSheet_GLUES.pdf
NOTE 1: We advise customer to ensure the suitability and sufficiency of the bond in the endproduct. For example, mechanical stress, vibration and holes on the surface of the circuit boarweaken the strength of the glue.
NOTE 2: All surfaces where glue is applied must be clean, dry and free from grease and dirt. Ifcleaning of PCB surfaces is needed, please follow strictly the cleaning instructions of your LEDmanufacturer -this is important as cleaning shall under no circumstances damage LEDs or otherelectronics components on the PCB.
Further note that optical components shall not be cleaned with any chemicals - only micro fibercloth may be used to remove fingerprints or other traces from handling.
December 18th 2012 18:31 Copyright Ledil Oy - Subject to change without prior notice - Page 3/3
Ledil Oy Salorankatu 10 24240 SALOFinland
http://www.ledil.com email: [email protected] FAX: +358-2-733 8001
Relative intensity of C10756_Cute-3-W-XM
0 %
25 %
50 %
75 %
100 %
-80-70-60-50-40-30-20-1001020304050607080