PRODUCT CODE 0064 Premium Satin Enamel - Asian Paints · PDF fileFinishes for Wood / Wall /...

Finishes for Wood / Wall / Metal Surfaces

PRODUCT BENEFITS

BEST IN CLASS

HIGH

MEDIUM

LOW

PRODUCT CODE 0064

Premium Satin EnamelAsian Paints Apcolite Premium Satin Enamel is a soft sheen enamel with the gentle, soothing sheen of a Satin fabric. It is just as durable as premium high gloss enamels and gives a long lasting washable finish.

**Actual coverage may vary from the quoted coverage due to factors such as method and condition of application and surface roughness and porosity.

* All Asian Paints products contain no added Lead, Mercury, Arsenic or Chromium

from April 2008.

On smooth masonry surface by brushing

1 COAT

240 - 280 sq.ft/ltr**

2 COATS

110 - 130 sq.ft/ltr**

WASHABILITY COLOURS AVAILABLE COVERAGE

AVAILABLE PACKS FINISH

PAINT APPLICATION PROCESSPRE PAINTING STEPS

STEP 6SANDING

STEP 4SANDING

STEP 3 KNIFING PASTE FILLER (METAL / WOOD)WALL PUTTY (MASONORY) PUTTY KNIFE

STEP 1 SANDING

STEP 7 FIRST COAT PREMIUM SATIN ENAMEL BRUSH / SPRAY / ROLLER

STEP 8 SECOND COAT PREMIUM SATIN ENAMEL BRUSH / SPRAY / ROLLER

BRUSH 30 - 40SPRAY 20 - 25

BRUSH 30 - 40SPRAY 20 - 25

BRUSH 4 - 10SPRAY 12 - 15


0016

1354

BRUSH 35 - 40SPRAY 22 - 25

BRUSH 15 - 20SPRAY 35 - 400064

6 - 8 HRS

4 - 6 HRS

BASED ON REQUIREMENT


6 - 8 HRS

6 - 8 HRS

6 - 8 HRS

6 - 8 HRSBRUSH 35 - 40SPRAY 22 - 25

BRUSH 15 - 20SPRAY 35 - 400064

WATEROR

MTO

MTO*

MTO*

MTO*

MTO*

SAND THE SURFACE WITH EMERY PAPER 180 AND WIPE CLEAN


APPLICATION CODE DILUTION % APPLICATION VISCOSITY1

RECOATING PERIOD

THINNERPLASTER New masonary surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonary surfaces.

CLEANING Surface should be free from any loose paint, dust or grease. Growths of fungus, algae or moss should be removed by wire brushing and water. In case of areas having excessive dampness use Asian Paints DampBlock to limit further dampness. When the underlying surface exhibits chalkiness, in spite of thorough surface cleaning, use Asian Paints Exterior Sealer.

FILLING FOR CRACKS For filling masonary upto 3mm use Asian Paints Crack Seal.

FILLING FOR HOLES & DENTS In case of dents and holes use Asian Paints Acrylic Wall Putty or white cement and fine sand in the ratio 1:3

Premium Satin Enamel should not be applied on surfaces / substrates that are subjected to continuous seepage or dampness.

Refer to sheen levels in technical detailsShelf life: 3 years from date of manufacture in original tightlyclosed containers away from direct sunlight and excessiveheat.

Soft Sheen Finish Premium Satin Enamel gives you a rich, sophisticated look that makes your house look a cut above the rest

Stain GuardSuperior washability & stain resistance helps you remove stains easily.

Anti-fungal Shield The imported biopack in Premium Satin Enamel protects surfaces from black spots and retains the beauty of your house!

High CoveragePremium Satin Enamel covers upto 25% more area than regular enamels – which means more savings for you!

*Currently available in 1788 shades as per the Colourworld Fandeck

PRODUCT FEATURES

HOW TO APPLY

SOLVENT BASED

1. As measured through a Ford cup.2. Recoat period is quoted for 25°C and 50% Relative Humidity, these may vary under different conditions.* Mineral Turpentine Oil3. Ensure that the metal substrates are free from oil, grease and rust before paint application.

MATT HIGH GLOSSLOW SHEEN HIGH SHEEN

STEP 2 METAL PRIMER (METAL) / DECOPRIME ST (MASONORY) / WOOD PRIMER (WOOD)


1788*

500 ml 1 ltr 4 ltr 10 ltr 20 ltr


000503590007

000503590007

SILKY SMOOTH


ADDITIONAL INFORMATION

Browse through Asian Paints colour tools to help you find the right colour combination

COLOUR SPECTRA FAN DECK*

POST PAINTING CARE

For the best performance of the paint, ensure proper washing and cleaning of all algal and fungal growth, if any, at regular intervals of six months.

TECHNICAL DETAILS

a. Drying time: Surface dry time 2.5 hrsb. Sheen levels: 15-35 at 60 deg GHc. Flash point 1s101/1987 Part 1 Sec 6 : 35 Deg C (95 Deg F) d. Stability of thinned paint: To be used within 24 hours

PRECAUTIONS

Do not apply when ambient temperature is less than 10°C or if the temperature might drop to this level within 4 hrs of application.Do not over-thin or over-extend the brush.Tint using Asian Paints machine colourants onlyStir well and strain before use.Tinted paints need thorough shaking immediately after tinter addition as well as before use.

>

>>

>>

SAFETY FEATURES

Kindly refer to the MSDS for Asian Paints Premium Satin Enamel which gives detailed information on safety measures while handling the paint. Store the container with the lid tightly closed in an upright position, in a cool, dry placeKeep out of reach of children and away from food, drinkMay be harmful if swallowed. In case of ingestion seek immediate medical attention.Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.In case of skin contact immediately wash skin with soap and plenty of water. Get medical attention if irritation develops or persists.Do not breathe vapour or spray.It is recommended to wear suitable nose pad during sanding and surface preparation to avoid dust inhalationDo not pour leftover paint down the drain or in water courses.In the event of spills, contain spillage using sand or earth.Safety Data Sheet available for professional user on request.No added Lead, Mercury or Chromium compounds

>

>

>>>

>

>

>>

>>

HOW TO CHOOSE COLOURS

Versio

n No

. VN

01/07/2012

Version No. VN27/02/2013. Please note that this datasheet supersedes all previous versions For Feedback/complaints, write to Marketing Manager ServicesAsian Paints Limited, 6A, Shantinagar, Santacruz(E), Mumbai 400 055, India

*These shades are for reference only. Please refer to the Colour Spectra or Colour Palette for correct shade reference

ENAMEL SHADE CARD


PRODUCT BENEFITS

BEST IN CLASS

HIGH

MEDIUM

LOW

PRODUCT CODE 0026 / 0001

Premium Gloss EnamelAsian Paints Apcolite Premium Gloss Enamel imparts a shiny new look to surfaces painted with this finish. It forms a tough film that is highly resistant to household stains. It thereby serves as a protective armour around the painted surface.



from April 2008.


1 COAT

185 - 225 sq.ft/ltr**

2 COATS

95 - 110 sq.ft/ltr**




STEP 7 FIRST COAT PREMIUM GLOSS ENAMEL BRUSH / ROLLER / SPRAY

STEP 8 SECOND COAT PREMIUM GLOSS ENAMEL BRUSH / ROLLER / SPRAY

BRUSH 55 - 60SPRAY 22 - 25


0001 0026

6 - 8 HRS

6 - 8 HRSBRUSH 55 - 60SPRAY 22 - 25


0001 0026

MTO*

MTO*


RECOATING PERIOD





Premium Gloss Enamel should not be applied on surfaces / substrates that are subjected to continuous seepage or dampness.

Refer to sheen levels in technical detailsAlso available in 50 ml,100 ml, 200 ml and 500 ml

Shelf life: 3 years from date of manufacture in original tightlyclosed containers away from direct sunlight and excessiveheat.

SILKY SMOOTH

High Gloss Finish Premium Gloss Enamel gives a mirror like gloss for your doors, windows, grills & gates

Tough and DurableThe oil based film of Premium Gloss Enamel makes it one of the toughest & most durable paints which forms a protective armour around surfaces

Stain Gaurd Premium Gloss Enamel is a highly washable paint, thus you can wipe off most common household stains easily

1737**Currently available in 1737 shades as per the Colourworld Fandeck

PRODUCT FEATURES

HOW TO APPLY

SOLVENT BASED

1. As measured through a Ford cup.2. Recoat period is quoted for 25°C and 50% Relative Humidity, these may vary under different conditions.* Mineral Turpentine Oil3. Ensure that the metal substrates are free from oil, grease and rust before paint application.


STEP 6SANDING

STEP 4SANDING

STEP 3 KNIFING PASTE FILLER (METAL / WOOD)WALL PUTTY (MASONORY) PUTTY KNIFE

STEP 1 SANDING

BRUSH 30 - 40SPRAY 20 - 25

BRUSH 30 - 40SPRAY 20 - 25



0016

1354

6 - 8 HRS

4 - 6 HRS



6 - 8 HRS

6 - 8 HRS

WATEROR

MTO

MTO*

MTO*



CODE APPLICATION VISCOSITY1

RECOATING PERIOD

THINNER




000503590007

000503590007

20 ltr10 ltr4 ltr1 ltr





POST PAINTING CARE

For the best performance of the paint, ensure proper washing and cleaning of all algal and fungal growth, if any, at regular intervals of six months.

TECHNICAL DETAILS

a. Drying time: Surface dry time 3 hrsb. Gloss levels: 75 - 85 on tin plate at 20 Deg Gloss Head c. 1s101/1987 Part 1 Sec 6 35 Deg C (95 Deg F) d. Stability of thinned paint: To be used within 24 hours

PRECAUTIONS


>

>>

>>

SAFETY FEATURES

Kindly refer to the MSDS for Asian Paints Premium Gloss Enamel which gives detailed information on safety measures while handling the paint. Store the container with the lid tightly closed in an upright position, in a cool, dry placeKeep out of reach of children and away from food, drinkMay be harmful if swallowed. In case of ingestion seek immediate medical attention.Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.In case of skin contact immediately wash skin with soap and plenty of water. Get medical attention if irritation develops or persists.Do not breathe vapour or spray.It is recommended to wear suitable nose pad during sanding and surface preparation to avoid dust inhalationDo not pour leftover paint down the drain or in water courses.In the event of spills, contain spillage using sand or earth.Safety Data Sheet available for professional user on request.No added Lead, Mercury or Chromium compounds

>

>

>>>

>

>

>>

>>


Versio

n No

. VN

01/07/2012



ENAMEL SHADE CARD


PRODUCT BENEFITS

BEST IN CLASS

HIGH

MEDIUM

LOW

PRODUCT CODE 0074

Premium Semi Gloss EnamelAsian Paints Premium Semi Gloss Enamel provides semi glossy finish and good resistance to stains. It has low odour and excellent non-yellowing properties. It does not yellow with passage of time, unlike alkyd enamels, giving your doors that ‘shiny-as-new’ look for a long time.



from April 2008.


1 COAT

120 - 150 sq.ft/ltr**

2 COATS

80 - 100 sq.ft/ltr**



1 ltr 4 ltr 20 ltr


STEP 6SANDING

STEP 4SANDING

STEP 1 SANDING

STEP 7 FIRST COAT PREMIUM SEMI GLOSS ENAMEL BRUSH / ROLLER / SPRAY STEP 8 SECOND COAT PREMIUM SEMI GLOSS ENAMEL BRUSH / ROLLER / SPRAY

13540016

10170005

10170005

4 - 6 HRS6 - 8 HRS

4 - 6 HRS

6 - 8 HRS

4 - 6 HRS00074

WATER ORMTO*

WATER ORMTO*

WATER ORMTO*

WATER

SAND THE SURFACE WITH EMERY PAPER 180 FOLLOWED BY EMERY PAPER 320 AND WIPE CLEAN


RECOATING PERIOD





Premium Semi Gloss Enamel should not be applied on surfaces / substrates that are subjected to continuous seepage or dampness.

Refer to sheen levels in technical detailsShelf life: 3 years from date of manufacture in original tightlyclosed containers away from direct sunlight and excessiveheat.

SILKY SMOOTH

Highly WashablePrevents stains like pickles, crayons & sauces from spoiling the look of your house!

Non YellowingRemains white even after a few years, whereas regular enamels start becoming yellow and looking old!

Anti FungalResists fungal attacks that result in black spots on the surfaces of doors, walls & cupboardsenamels start becoming yellow and looking old!

Odour Free Premium Semi Gloss Enamel does not have any smell like a regular enamel paint - you won’t even realise that your house is being painted!

Quick DryingDries within 30 minutes & can be recoated in 4 hours - so you can finish your paint job in just one day - unlike regular enamels which require 2 days!

1530**Currently available in 1530 shades as per the Colourworld Fandeck

PRODUCT FEATURES

HOW TO APPLY

WATER BASED

1. As measured through a Ford cup.2. Recoat period is quoted for 25°C and 50% Relative Humidity, these may vary under different conditions.* Mineral Turpentine Oil


STEP 2 PREMIUM AQUA PRIMER /METAL PRIMERBRUSH / SPRAY

STEP 5 PREMIUM AQUA PRIMER /METAL PRIMERBRUSH / SPRAY

SAND THE SURFACE WITH EMERY PAPER 180 FOLLOWED BY EMERY PAPER 320 AND WIPE CLEAN

LIGHT SANDING WITH EMERY PAPER 320 OR 400 AND WIPE CLEAN

100% WATER ORBRUSH 8 - 10SPRAY 12 - 15

BASED ONREQUIREMENT

BASED ONREQUIREMENT

100% WATER ORBRUSH 8 - 10SPRAY 12 - 15

BRUSH 15 - 25SPRAY 25 - 35

BRUSH 30 - 35SPRAY 20 - 25

13 -15 ORBRUSH 30 - 40SPRAY 20 - 25

4 - 6 HRS

6 - 8 HRS

13 -15 ORBRUSH 30 - 40SPRAY 20 - 25

STEP 3 ACRYLIC WALL PUTTY (CEMENT) /KNIFING PASTE FILLER (WOOD / METAL)PUTTY KNIFE

4 - 6 HRS00074 WATER BRUSH 15 - 25SPRAY 25 - 35

BRUSH 30 - 35SPRAY 20 - 25





POST PAINTING CARE

For the best performance of the paint, ensure proper washing and cleaning of fungal growth, if any, at regular intervals of six months.

TECHNICAL DETAILS

a. Drying time: Surface dry time 30 minb. Sheen levels: 50 - 60 at 60 deg GHc. Flash point IS101/1987 Part 1, Sec 6: NAd. Stability of thinned paint: To be used within 24 hours

PRECAUTIONS


>

>>

>>

SAFETY FEATURES

Kindly refer to the MSDS for Asian Paints Semi Gloss Enamel which gives detailed information on safety measures while handling the paint. Store the container with the lid tightly closed in an upright position, in a cool, dry placeKeep out of reach of children and away from food, drinkMay be harmful if swallowed. In case of ingestion seek immediate medical attention.Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.In case of skin contact immediately wash skin with soap and plenty of water. Get medical attention if irritation develops or persists.Do not breathe vapour or spray.It is recommended to wear suitable nose pad during sanding and surface preparation to avoid dust inhalationDo not pour leftover paint down the drain or in water courses.In the event of spills, contain spillage using sand or earth.Safety Data Sheet available for professional user on request.No added Lead, Mercury or Chromium compounds

>

>

>>>

>

>

>>

>>


Versio

n No

. VN

01/07/2012



ENAMEL SHADE CARD

PRODUCT CODE 0064 Premium Satin Enamel - Asian Paints · PDF fileFinishes for Wood / Wall /...

Documents

Transcript of PRODUCT CODE 0064 Premium Satin Enamel - Asian Paints · PDF fileFinishes for Wood / Wall /...