PRODUCT CATALOGUE - Renssi · 2017 product catalogue renssi® tools 2017 chain knockers brushes...
Transcript of PRODUCT CATALOGUE - Renssi · 2017 product catalogue renssi® tools 2017 chain knockers brushes...
2017
PRODUCT CATALOGUE RENSSI® TOOLS 2017
CHAIN KNOCKERSBRUSHESCUTTERSCENTERING AXELSSANPAPERHOLDERSADAPTERS & ACCESSORIESPRESSADJUSTABLE CLUTCHINVERSION DRUMSDRUM HEADSRENSSI® MACHINECABLESCABLE BALLBEARINGS
How to Buy Chain Knockers
Chain Knockers
How to Buy Brushes
Brushes
Cutters
Centering Axels
Cable Connectors
Sandpaper Holders & Sandpapers
Overshot Pipe Cutter
How to Buy Adapters & Accessories
Adapters & Accessories
How to Buy Equipment
Press
Adjustable Clutch
Inversion Drums
Drum Heads
Renssi® Machine
How to Buy Cables
Cables
Cable Covers & Rotating Cables
Cable Ballbearings
Metric Allen Key Set
4-5
6-9
10-11
12-13
14-15
16-17
16-17
18
19
20-21
22-23
24-25
26
27
28-29
30-31
32-33
34-35
36-37
38
39
39
PRODUCT CATEGORIES
4
How to Buy Chain KnockersRenssi is a revolutionary, mechanically rotated tool for sewer cleaning and pipeline renovations.
Depending on the size of the tool, it has one to three chains with solid carbide inserts brazed on the chainlinks. Because of the inserts, which make the tool so special, the pipe is cleaned out of rust and dirt very effectively.There are two different types of connections to the rotating wire. The wire can be put through the tool and tightened using allen screws or it can be connected using t-slot connectors.
RS-(16)-10 50-(/2)-DR
®
Tool's identificationEvery tool has it’s own code which is used when ordering. Renssi has codes RS, RS-T, RSM, RH, RD, RA, SR, RT, RP, RP-T, RID, DH, CLT, TC, RC and RCC. Chain knockers are found under codes RS, RS-T and RSM.
Cable size Ø 1 = 8mm2 = 10mm 3 = 12mm
(Diameter Ø)ONLY included in RS-T series!Defines the adapter diameter for RS-T series.
5
RS-(16)-10 50-(/2)-DRFeatures of ChainsChain knockers has usually three chains but we have also few models with two chains and even with one chain. They are marked up with /2 or -1–codes.4T stands for 4mm chain and tips.
Information of ToolDR stands for drill head
feature. You can open up for
example a lateral connection
with it.
Pipe size ØTools are designed to match the pipe size. Right size chain knocker cleans the pipe gently without harming the surfaces of the pipe.
6
CHAIN KNOCKERS
Product code
RS-1050/2
RS-1050
RS-1075/2
RS-1075
RS-1100
RS-1125
RS-1150
RS-1200
Pipe Ø (mm)
35-50 mm
35-50 mm
50-75 mm
50-75 mm
75-100 mm
100-125 mm
125-150 mm
150-200 mm
RS 1000 SERIES 8mm cable connection
Product code
RS-2050/2
RS-2050
RS-2075/2
RS-2075
RS-2100
RS-2125
RS-2150
RS-2200
Pipe Ø (mm)
35-50 mm
35-50 mm
50-75 mm
50-75 mm
75-100 mm
100-125 mm
125-150 mm
150-200 mm
RS 2000 SERIES 10mm cable connection
Product code
RS-3050/2
RS-3050
RS-3075
RS-3100
RS-3125
RS-3150
RS-3200
Pipe Ø (mm)
35-50 mm
35-50 mm
50-75 mm
75-100 mm
100-125 mm
125-150 mm
150-200 mm
RS 3000 SERIES 12mm cable connection
TOOLS FOR CABLES
RS-2200
RS-3125
REGULAR HEAD
RS-1125
6
7
Pipe Ø (mm)
35-50 mm
50-75 mm
75-100 mm
100-125 mm
125-150 mm
150-200 mm
Pipe Ø (mm)
35-50 mm
35-50 mm
50-75 mm
75-100 mm
100-125 mm
125-150 mm
150-200 mm
Pipe Ø (mm)
35-50 mm
35-50 mm
50-75 mm
75-100 mm
100-125 mm
125-150 mm
150-200 mm
CHAIN KNOCKERS
Product code
RS-1050/2-DR
RS-1050-DR
RS-1075-DR
RS-1100-DR
RS-1125-DR
RS-1150-DR
RS-1200-DR
Product code
RS-2050/2-DR
RS-2050-DR
RS-2075-DR
RS-2100-DR
RS-2125-DR
RS-2150-DR
RS-2200-DR
Product code
RS-3050-DR
RS-3075-DR
RS-3100-DR
RS-3125-DR
RS-3150-DR
RS-3200-DR
DRILL HEAD TOOLS FOR CABLES
RS-1100-DR
RS-2150-DR
RS-3150-DR
7
DRILL HEAD
RS 1000 SERIES 8mm cable connection
RS 2000 SERIES 10mm cable connection
RS 3000 SERIES 12mm cable connection
8
Pipe Ø (mm)
35 mm
35 mm
35-50 mm
35-50 mm
30 mm
30 mm
35-50 mm
MINI RENSSI TOOLS
Product code
RSM-1035-1
RSM-1035-2
RSM-1050-1
RSM-1050-2
RSM-2030-1
RSM-2030-2
RSM-2050-2
RSM SERIES
Pipe Ø (mm)
50-75 mm
75-100 mm
100-125 mm
125-150 mm
150-200 mm
Product code
RS-T-16-50
RS-T-16-75
RS-T-16-100
RS-T-16-125
RS-T-16-150
RS-T-16-200
RS-T 16 SERIES T-slide connectors
T-SLIDE SERIES
Product code
RS-T-20-75
RS-T-20-100
RS-T-20-125
RS-T-20-150
RS-T-20-200
RS-T 20 SERIES T-slide connectors
Pipe Ø (mm)
50 mm
50-75 mm
75-100 mm
100-125 mm
125-150 mm
150-200 mm
RSM-1035-1
9
Pipe Ø (mm)
75-100 mm
100-125 mm
125-150 mm
150-200 mm
Product code
RS-2100-4T
RS-2125-4T
RS-2150-4T
RS-2200-4T
RS 2000-4T SERIES 10mm cable connection
TOOLS FOR CABLES WITH 4mm CHAIN & TIPS
Pipe Ø (mm)
75-100 mm
100-125 mm
125-150 mm
150-200 mm
Product code
RS-3100-4T
RS-3125-4T
RS-3150-4T
RS-3200-4T
RS 3000-4T SERIES 12mm cable connection
Product code
RS-T-16-100-4T
RS-T-16-150-4T
RS-T-16-200-4T
T-SLIDE SERIES WITH 4mm CHAIN & TIPS
Pipe Ø (mm)
75-100 mm
125-150 mm
150-200 mm
Product code
RS-T-20-100-4T
RS-T-20-150-4T
RS-T-20-200-4T
Pipe Ø (mm)
75-100 mm
125-150 mm
150-200 mm
RS-T 16 SERIES T-slide connectors
RS-T 20 SERIES T-slide connectors
RS-T-20-125
RS-2150-4T
RSM-1050-2
10
RH-1050-40-07
How to Buy BrushesBrushes have quite many different ways of use.
Brushes are good for example to clean plastic pipes, where the use of the chain knocker is too heavy. Brushes are also suitable for spreading the paste in the spraylining method and also to center different kinds of tools in the pipe, like drills etc.
High-quality strings are made of nylon. We have also NYLON/STEEL brushes which are especially designed for cleaning plastic pipes.
Tool's identificationEvery tool has its own code which is used when ordering. Renssi has codes RS, RS-T, RSM, RH, RD, RA, SR, RT, RP, RP-T, RID, DH, CLT, TC, RC and RCC. Brushes are found under code RH.
Cable size Ø 0 = 6mm1 = 8mm 2 = 10mm3 = 12mm
Brush’s Diameter Ø Tools are designed to match the pipe size. Right size brush cleans the pipe gently without harming the surfaces of the plastic pipe.
11
RH-1050-40-07Length of the HubDefines the length of the hub in millimeters.
Information of the ToolThis defines the thickness of the nylon string. 07 stands for 0,7 mm string etc. You can choose from 0,3 - 0,5- 0,7 - 0,9 (mm).
NS stands for NYLON/STEEL brush which is designed for a bit heavier cleaning and also for grinding the surface of the plastic pipe before spraylining. NS brushes are only available with one size strings.
We can also make a custom brush regarding to customer’s needs.
12
BRUSHES
Product code
RH-1040-14-03
RH-1045-14-03
RH-1050-14-03
RH-1050-20-03
RH-1075-20-05
RH-1075-20-07
RH-1100-20-05
RH-1100-20-07
RH-1125-29-05
RH-1125-29-07
RH-1150-29-05
RH-1150-29-07
RH-1160-40-07
RH-1175-29-05
RH-1175-40-07
RH-1200-40-07
Diameter Ø
Ø 40 mm
Ø 45 mm
Ø 50 mm
Ø 50 mm
Ø 75 mm
Ø 75 mm
Ø 100 mm
Ø 100 mm
Ø 125 mm
Ø 125 mm
Ø 150 mm
Ø 150 mm
Ø 160 mm
Ø 175 mm
Ø 175 mm
Ø 200 mm
Hub length
14 mm
14 mm
14 mm
20 mm
20 mm
20 mm
20 mm
20 mm
29 mm
29 mm
29 mm
29 mm
40 mm
29 mm
40 mm
40 mm
NYLON BRUSHES Center hole of the hub 8mm
BRUSH STOCKLIST
Product code
RH-1075-24-NS
RH-1105-24-NS
RH-1130-24-NS
RH-1155-29-NS
RH-1175-29-NS
RH-1205-29-NS
Diameter Ø
Ø 75 mm
Ø 105 mm
Ø 130 mm
Ø 155 mm
Ø 175 mm
Ø 205 mm
Hub length
24 mm
24 mm
24 mm
29 mm
29 mm
29 mm
NYLON/STEEL BRUSHES Center hole of the hub of 8mm
If you are seeking A CUSTOM BRUSH
designed to your needs, you can order them from us. Our minimum custom brush
order is 10 brushes.
INFO
13
SECURING RING for Brushes
Product code
SR-20-006
SR-20-008
SR-20-010
SR-20-012
Product
for 6mm cable
for 8mm cable
for 10mm cable
for 12mm cable
The securing ring is used to prevent a drop of the brush from the cable during the cleaning.
13
14
®
RLC-100
RLC-150
RLC-075
CUTTERSProduct code
RLC-050
RLC-075
RLC-100
RLC-150
Diameter Ø
50mm
75mm
100mm
150mm
Cable size Ø
for 50mm pipe
for 75mm pipe
for 100mm pipe
for 150mm pipe
CUTTERS for Branch connections
14
15
RCD-100
RD-008
RLC-050
Product code
RD-008
RD-010
RD-012
Cable size Ø
for 8mm cable
for 10mm cable
for 12mm cable
CABLE TIP DRILL
Product code
RCD-050
RCD-100
RCD-I-050
RCD-I-100
Information
Ø 50mm, 5 inserts
Ø 100mm, 5 inserts
50mm - 5 inserts and screws
100mm - 5 inserts and screws
COLLAPSE LINE DRILL
Includes sleeves for 8mm, 10mm and 12mm cables.
Cutters are used in different operations of relining process.
For example RLC-100 is used to open the lateral connection
in 100 mm pipe.
CUTTER INFO
RLC-075
15
16
Cable connectors can connect centering axel
or another cable to your cable.
INFO
Product code
RCA-050
RCA-075
RCA-100
RCA-150
Cable size Ø
for 50mm pipe
for 75mm pipe
for 100mm pipe
for 150mm pipe
Centering Axels are used to centralize different Renssi® Tools to get the best result for your job.
Suitable tools are for example RCD and RLC tools. Centering Axel has high quality ballbearings inside to make it
rotate well.
INFO
Product code
CC-050
CC-100
CC-150
CC-008
CC-010
CC-012
CC-014-010
CC-014-012
Information
for 50mm centering axel /Ø 14mm
for 100mm centering axel/Ø 14mm
for 150mm centering axel/Ø 14mm
for 8 mm cable
for 10 mm cable
for 12mm cable
for 10mm cable to connect centering axel
for 12mm cable to connect centering axel
RCA-150
ROC-100 + RCA-050 + CC-050
CABLE CONNECTORS
CENTERING AXELS
16
CUTTER ASSEMBLY
17
RCA-050 RCA-075
17
CC-050 CC-100 CC-008 CC-010 CC-012 CC-150
18
RSP-40-110 and RSP-20-55
SANDPAPER HOLDER
Product code
RSP-20-55
RSP-40-110
Product size Ø
55mm wide, 4 papers, Ø 20mm
110 mm wide, 4 papers, Ø 40mm*
SANDPAPER HOLDERS
SANDPAPERS
* Includes sleeves for 8mm, 10mm and 12mm cables.
Product code
SPB-2-3
SPB-2-4
SPB-2-6
SPB-4-4
SPB-4-6
Product size
50mm width x 75mm length
50mm width x 100mm length
50mm width x 150mm length
100mm width x 100mm length
100mm width x 150mm length
If you overshoot a liner in 4” pipe, you can easily cut off the excess liner with our Overshot Pipe Cutter.
INFO
18
19
Product code
ROC-100
Product size Ø
for 100mm pipe
OVERSHOT PIPE CUTTER
RSP is a sandpaper grinder, with four sandpapers attached to it’s body. After
cutting a lateral, you can finish the job with it. Use this with different size sandpapers,
to match the pipe you are working with.
INFO 19
20
How to Buy AdaptersIn this category you can find adapters to connect Renssi® Tools with your gear. There are also available many kinds of other accessories which you can use with your Renssi® Tools. With the definition code, you can easily define what kind of and which size adapter you need.
RA-16-00 1-008-IXT-slide femaleT-slide maleEndbit of cable6mm hole8mm hole10mm holeRotator shaft12mm hole8mm pom shaft10mm pom shaft12mm pom shaft16mm pom shaftM14 thread maleShackle, stainless steelM10 thread femaleG¼ thread maleG¼ thread female
Adapter from001 002 003 006008 010011 012P08P10P12 P16 033 060 065 070 071
Connector series size ØDefines the diameter of the adapter.
Tool's identificationEvery tool has its own code which is used when ordering. Renssi has codes RS, RS-T, RSM, RH, RD, RA, SR, RT, RP, RP-T, RID, DH, CLT, TC, RC and RCC. Adapters and accessories are found under code RA and SR.
21
RA-16-00 1-008-IXInformation of ToolIX means that the adapter is fully made of stainless steel. This feature makes it extra strong.
T-slide femaleT-slide maleEndbit of cable6mm hole8mm hole10mm holeRotator shaft12mm hole8mm pom shaft10mm pom shaft12mm pom shaft16mm pom shaftM14 thread maleShackle, stainless steelM10 thread femaleG¼ thread maleG¼ thread female
Adapter to001 002 003 006008 010011 012P08P10P12 P16 033 060 065 070 071
22
Product
T-slide, female, 8mm cable
T-slide, female, 10mm cable
T-slide, male, 8mm cable
T-slide, male, 10mm cable
8mm cable, ½" UNF thread male
T-slide, female, 10mm cable
T-slide, female, 12mm cable
T-slide, male, 10mm cable
T-slide, male, 12mm cable
T-slide from 16mm to 20mm
M14 thread male, rotator shaft
Product code
RA-16-001-008
RA-16-001-010
RA-16-002-008
RA-16-002-010
RA-16-008-021
RA-20-001-010
RA-20-001-012
RA-20-002-010
RA-20-002-012
RA-20-001/16-002
RA-24-033-011
CONNECTORS 16-20-24mm
RA-16-001-060-IX
RA-16-002-008
RA-20-012-011
Product code
RA-080-010-IX
RA-080-012-IX
Product
for 10mm cable, Ø 8mm shaft inox
for 12mm cable, Ø 8mm shaft inox
BRUSH ADAPTERS
Product code
RA-014
RA-015
Product
T-Slide opener key 4mm
T-Slide opener key 5mm
ACCESSORIES
22
Product code
RA-16-002-011
RA-16-008-011
RA-16-010-011
RA-20-002-011
RA-20-012-011
ROTATOR SHAFTS
Product
T-slide, male, rotator shaft
8mm cable, rotator shaft
10mm cable, rotator shaft
T-slide, male rotator shaft
12mm cable, rotator shaft, male
RA-20-001-/16-002
ADAPTERS & ACCESSORIES
23
RA-016
23
RA-20-070-P08
Packers
PP-D30-720-08
PP-D40-720-10
PP-D60-720-10
Information
assembly, Ø30mm, length 720mm, 8mm
assembly, Ø40mm, length 720mm, 10mm
assembly, Ø60mm, length 720mm, 10mm
Product code
RA-010
RA-016
Information
10mm pom axle, length 1,5m
16mm pom axle, length 1,5m
PUSH RODS
Push rods for T-slide with male and female ends.
Push rods are manufactured by customer’s needs. Minimum order is 5 pcs.
Push rod connectors
RA-20-001-P16-IX
RA-20-002-P16-IX
RA-20-070-P08
RA-20-070-P10
RA-20-070-P16
RA-20-071-P10
RA-16-001-060-M4-IX
RA-16-001-060-M5-IX
RA-20-001-060-M6-IX
Information
T-slide, female, 16mm pom shaft inox
T-slide, male, 16mm pom shaft inox
G¼ male, 8mm pom shaft
G¼ male, 10mm pom shaft
G¼ male, 16mm pom shaft
G¼ female, 10mm pom shaft
T-slide, female, shackle M4 aisi 316
T-slide, female, shackle M5 aisi 316
T-slide, female, shackle M6 aisi 316
Middle bars
PP-VT-500-8
PP-VT-500-10
PP-VT-720-8
PP-VT-720-10
Information
length 500mm, Ø 8mm
length 500mm, Ø 10mm
length 720mm, Ø 8mm
length 720mm, Ø 10mm
Packer heads
PP-D30-AL
PP-D40-AL
PP-D60-AL
APC-1/4
APP-1/4
Information
packer head Ø 30mm, aluminium
packer head Ø 40mm, aluminium
packer head Ø 60mm, aluminium
air pressure connector, accessory
air pressure plug G¼, accessory
PP-D40-720-10
ADAPTERS & ACCESSORIES
24
How to Buy EquipmentRenssi® Equipment includes all tools you’ll need for relining pipes. We have presses, inversion drums, a machine and a clutch.
There are multiple sizes of inversion drum and press models which make them suitable for various types and sizes of pipes. Smaller models, Renssi® Machine and the clutch are designed to use for cleaning and relining pipelines of an appartment. Large models can be used for relining larger complexes of many appartments. Drum heads help you to use right size liner for the pipe. All products are made of quality materials and we are constantly developing each model to be more efficient and accurate for your convenience. cleaning plastic pipes.
RP CLT RID RCMTool's identificationEvery tool has it’s own code which is used when ordering. Equipment are found under codes RP, CLT, RID and RCM. Accessories for the equipment are found under codeC CAT, CRS, RID and DH.
25
RP CLT RID RCMCAT CRS DH
Accessories of the EquipmentAccessories of the equipment are sold separately. Accessories’ main goal is to make working with tool more efficient. Clutch spare parts and drum heads of inversion drums ease the use and give multiple choices to working.
26
PRESS
Product code
RP-325
RP-475
Information
325 mm wide, up to Ø 200mm liner
475 mm wide, up to Ø 300mm liner
RENSSI® PRESS
If you need a metric steel measure, you can order it separately.
RP-325
Epoxy spreads smoothly on the liner with Renssi® Press. Smoothly spread epoxy on the surfaces of the liner ables successful relining, which repairs
pipe’s surface damages and protects the pipe being damaged for a long time.
INFO
26
27
ADJUSTABLE CLUTCH
CLT-001
The clutch is used as an accessory for a drill when rotating a cable with a chain
knocker on it. The clutch prevents the cable
of breaking down and also personal injuries, if the tool
gets stuck in the pipe while rotating.
INFO
CAT-set
27
CRS-011
Product code
CLT-001
Information
Clutch for a drill
ADJUSTABLE CLUTCH and Spare parts
Includes sleeves for 8mm, 10mm and 12mm cables. Includes also clutch keys and a clutch rotator sleeve. The drill is sold separately.
* Includes sleeves for 8mm, 10mm and 12mm cables.
Spare parts
CLT-25-002-S
CLT-25-006-S
CLT-25-014
CAT-44
CAT-001
CAT-set
CRS-011
T-slide 16mm adapter, male
Adapter for 6mm cable
Adapter for 14mm cable*
Clutch adjusting tool
Hexagonal clutch adjusting tool
CAT-44 + CAT-001 set
Clutch rotator sleeve
28
RID-400
Inversion Drums are used in the pipe relining. Pneumatic features of the inversion drum shoot the liner smoothly into a pipe which is important in achieving a successful result.
INFO
INVERSION DRUMS28
Inversion Drum Model RID-400 is a hybrid, which means that you can attach this model into an accesory bracket RID-400-BR by removing it from its cart. This ability is not
available in other models.
RID-400 INFO
29
RID-800
INVERSION DRUMS
Information
Ø 200 mm
Ø 300 mm
Ø 400 mm
Ø 600 mm
Ø 800 mm
Product code
RID-200
RID-300
RID-400
RID-600
RID-800
INVERSION DRUMS29
Accessory
RID-400-BR
Information
bracket to RID-400
RID-400 + RID-400-BR
RID-400-BR ATTACHMENT
30
Information
for Ø 50mm liner
for Ø 70mm liner
for Ø 100mm liner
for Ø 150mm liner
Product code
DH-6S-50
DH-6S-70
DH-6S-100
DH-6S-150
DRUM HEADS with 6” thread attachment
This product is not available in our stock. We will start production after receiving the order.
Information
4” Storz adapter / thread
6” Storz adapter / thread
Product code
DH-4S
DH-6S
DRUM HEAD Storz adapters
DRUM HEADS
DH-4S
Information
for Ø 50mm liner
for Ø 70mm liner
for Ø 100mm liner
Product code
DH-4S-50
DH-4S-70
DH-4S-100
DRUM HEADS with 4” thread attachment
30
Custom drum heads can be manufactured by customer’s needs. Minimum order is 15 pcs.
CUSTOM DRUM HEADS
DH-4S COLLECTION
DH-6S + DH-6S-100
31
DH-6S
DH-6Z/R2-150
31
DRUMHEAD ATTACHED
Drum Head is an accessory of the inversion drum.
It ables a versatile use of drums in relining.
INFO
32
RENSSI MACHINE
Product code
RCM-10
RCM-20
RCM-35
Information
cleaning unit with 10m of Ø 10mm cable
RENSSI® MACHINE
RENSSI® Machine comes with Bosch 21-2-RCT drill, Renssi CLT-001 clutch and 10 meters of 10mm cable.
You can connect Renssi® chainscrapers, brushes and cutters to this machine, depending on your current job.
INFO
33
RENSSI MACHINERCM-10
34
How to Buy CablesThere are two types of cables that we are offering to ourcustomer; Cross Layer and Spring Layer cable. There are a few differences between cables and you are welcome to ask more about their features from us.You have an option to choose ready-to-use TC- and TS- cables, which includes a cover, cable and T-slide adapters and/or a sleeve, or you can also order cables and covers separately. All you need to know is the length and diameter of the cable and you are ready to choose the cable of your needs.
TC-2001,5Cable size Ø 1 / 008 = 8mm 2 / 010 = 10mm3 / 012 = 12mm
004 = 4mm
005 = 5mm
006 = 6mm
Tool’s identificationEvery tool has it’s own code which is used when ordering. Cables are found under codes TC, TS, RC and RCC. Cable accessories are found under code CCB.TC is a ready-to-use cable with a ballbearing and female/male t-slide ends.
Cable length (m)Cable’s length is determinated after its size value. 001,5 = 1,5 m
35
TS-2001,5Cable size Ø 1 / 008 = 8mm 2 / 010 = 10mm3 / 012 = 12mm
004 = 4mm
005 = 5mm
006 = 6mm
Tool’s identificationEvery tool has it’s own code which is used when ordering. Cables are found under codes TC, TS, RC and RCC. Cable accessories are found under code CCB.TS is a ready to use cable with a ballbearing and a sleeve head.
Cable length (m)Cable’s length is determinated after its size value. 001,5 = 1,5 m
36
T-SLIDE ADAPTERS AND A BALLBEARING INCLUDED IN TC CABLES
Product code
TC-1001
TC-1002
TC-1003
TC-1005
TC-1006
TC-1008
TC-1010
TC-1015
TC-1020
TC 1000 SERIES 8mm cable / adapters 16mm
Length (m)
1 m
2 m
3 m
5 m
6 m
8 m
10 m
15 m
20 m
We sell ready-to-use T-cables and cables and covers separately for customer's needs. TC-cables includes a cover, a cable, a ballbearing and T-slide adapters.We use Cross Layer Cable in TC Cables.
TC CABLES
Product code
TC-2001
TC-2002
TC-2003
TC-2005
TC-2006
TC-2008
TC-2010
TC-2015
TC-2020
TC 2000 SERIES 10mm cable / adapters 16mm
Length (m)
1 m
2 m
3 m
5 m
6 m
8 m
10 m
15 m
20 m
Product code
TC-3001
TC-3002
TC-3003
TC-3005
TC-3006
TC-3008
TC-3010
TC-3015
TC-3020
TC 3000 SERIES 12mm cable / adapters 20mm
Length (m)
1 m
2 m
3 m
5 m
6 m
8 m
10 m
15 m
20 m
36
37
Product code
TS-1001
TS-1002
TS-1003
TS-1005
TS-1006
TS-1008
TS-1010
TS-1015
TS-1020
TS 1000 SERIES 8mm cable
Length (m)
1 m
2 m
3 m
5 m
6 m
8 m
10 m
15 m
20 m
Product code
TS-2001
TS-2002
TS-2003
TS-2005
TS-2006
TS-2008
TS-2010
TS-2015
TS-2020
TS 2000 SERIES 10mm cable
Length (m)
1 m
2 m
3 m
5 m
6 m
8 m
10 m
15 m
20 m
Product code
TS-3001
TS-3002
TS-3003
TS-3005
TS-3006
TS-3008
TS-3010
TS-3015
TS-3020
TS 3000 SERIES 12mm cable
Length (m)
1 m
2 m
3 m
5 m
6 m
8 m
10 m
15 m
20 m
We sell ready-to-use T-cables and cables and covers separately for customer's needs. TS-cables includes a cover, a cable, a ballbearing and a steel sleeve.We use Cross Layer Cable in TS Cables.
TS CABLES
A BALLBEARING AND A STEEL SLEEVE INCLUDED IN TS CABLES
37
38
COVERS ROTATING CABLES
CABLE
1.
2.
CABLES FOR EFFECTIVE USE:1. Cross Layer Cable2. Spring Layer Cable
INFO
38
Product code
RCC-06/08-N
RCC-08/10-N
RCC-10/12,5-N
RCC-12,5/15-N
RCC -13,5/16-N
Information
for 4mm cable
for 6mm cable
for 8mm cable
for 10mm cable
for 12mm cable
Product code
RC-004-1
RC-006-1
RC-008-1
RC-008-2
RC-010-1
RC-010-2
RC-012-1
RC-012-2
Diameter Ø
Ø 4mm
Ø 6mm
Ø 8mm
Ø 8mm
Ø 10mm
Ø 10mm
Ø 12mm
Ø 12mm
39
BALLBEARINGS
Product size
8mm cable / 12mm cover
10mm cable / 15mm cover
12mm cable / 16mm cover
12mm cable / 20mm cover
tool for CB-D8/ -D10/ -D12
tool for CBP-12
CABLE COVER BALLBEARINGS
Product code
CB-D8
CB-D10
CB-D12
CBP-D12
CBT-20
CBT-24
BALLBEARING KEYS CBT-20 and CBT-24
ROTATING CABLES
METRIC ALLEN KEYS
Product code
RAK-set
Metric Allen Keys for Renssi® Tools. Includes 2.0, 2.5, 3.0, 4.0 , 5.0, 6.0 allen keys.
Product code
six metric allen keys set
METRIC ALLEN KEYS
39
40
Prices EXW our stock. All rights reserved.Printed out on January 2017
CONTACT
Renssi Finland Oyaddr. Lautamiehenkatu 1,20780 Kaarina FINLANDe-mail. [email protected]
ARE YOU READY TO BUY RENSSI TOOLS?