P R O D U C T C A T A L O G U E

2

Why Zip?Why clutter your kitchen with kettles and water dispenserswhen there’s a simple, smart and stylish solution! The Zip rangeof water boilers and chiller units from Franke provide an instanteconomic and innovative solution.

Energy EfficientWhen it comes to saving energy, Zip comes out top of itsclass. HydroTaps and Hydroboils have been designed withenergy efficiency in mind, incorporating highly effectiveinsulation and innovative technology to perform to levelsthat are up to three times more energy efficient than atraditional urn.

InnovativeTechnologyThe clever patented dual chamber system in the Hydroboils,incorporating functions such as “sleep modes” in the HydroTapand Hydroboil Pro and self calibration of boiling point at anyaltitude, are all examples of the original and unique conceptsdeveloped by Zip to ensure their products remain at theforefront in instant boiling water devices.

Ergonomic DesignPush down on the Hydroboil or HydroTap lever and enjoyaccurate dispensing control into cups and mugs. Lifting thelever to the “lock” position enables large volume dispensinginto teapots, saucepans, bottles etc, without having tocontinuously hold the lever. The HydroTap is also availablewith larger lever sets designed in order to assist those peoplewith physical disabilities.

Healthier DrinksThe Zip triple action filtration system (optional on theHydroboil) improves the condition of the water suppliedfrom the HydroTap and Hydroboil units.

Why triple action? Not only does the filter improve the tasteof the water, but it further removes harmful physicalcontaminants and prevents lime scale build up on theelements of the units. Zip filters will not remove the fluoridefrom the water resulting in the freshest tasting drinks. Filteredboiling water has great benefits for cooking with regards toboth taste and health aspects!

Safer than kettles& urnsNo need to worry about overturned kettles or urns, or clumsycords cluttering counter tops. Both the HydroTap and theHydroboil are plumbed directly into the water supply andtherefore never need refilling. The HydroTap and the HydroboilPro also possess unique safety mechanisms which preventboiling water being dispensed inadvertently – a keyadvantage when little fingers may be tempted to exploreand play.

3

ConvenienceWith both units dispensing boiling water at the touch of atap, the ease of having such a unit cannot be over stated.The Hydroboil can be installed where it fits best, all it needsis an electrical outlet and cold water supply. The HydroTap,with its unique (optional) font has its own drain, and can bemounted on virtually any bench top that has plumbingavailable. And imagine, never having to watch a pot or waitfor a kettle to boil again!

ChoiceFunctional on wall or elegant under counter models, areavailable in a range of sizes to suit your particular consumptionneeds, providing a full choice of options designed to suit anyenvironment or fit any circumstance.

Nationwide ServiceBoth the HydroTap and Hydroboil are backed by Franke’sefficient nationwide service agent network and are suppliedwith a 12 month warranty.

4

Sample specification guideZip HydroTap model number .......... designed to comply with the following specification:

1 To dispense filtered boiling or chilled water instantly2 To be operated by lever action push lever to fill cups; raise lever to lock “on” to fill pots3 To have the option of oversized levers for use by people with physical disabilities4 To be installed at a sink or as a stand-alone appliance on a bench top with integral drainage facility5 To have an inbuilt child-proof safety lock as standard with visual indication of locking status6 To have fully encapsulated filters so that filter changing is quick, easy and hygienic7 To have a choice of five micron8 To have visual indication of ready-to-use and filter replacement status9 To house all heating and cooling components out of sight in a single case with easy access to water filter10 To calibrate boiling point independent of altitude11 To have energy conserving features including a choice of two sleep modes and the facility to programme the appliance to

cycle on and off at predetermined times on a daily basis12 To have boil-dry and chiller over-run protection13 To vent from the tap head into the sink14 To have Stainless Steel water tanks15 To have an inbuilt filter-flush system16 To have a fan-cooled condenser type chilling system17 To operate effectively at low mains pressures18 To have an integral sealed safe tray and inbuilt leak detector to detect water leakage and be capable of isolating the water

supply automatically should an internal leak occur

Description• Type: lever operated filtered drinking water appliance dispensing filtered boiling and chilled water• Power supply: 220V – 240V AC 50/60Hz• Water supply pressure: 175kPa to 700kPa• Tank construction: Tig welded 444 Stainless Steel• Case material: Powder coated zinc seal• Filtration: Five micron• Boiling water element rating: 2000W (BC150/175), 1500W (BC100/125)• Boiling water delivery rate: 3 litres per minute• Boiling water delivery in one hour (167ml cups): 150 cups HydroTap II, 100 cups HydroTap• Boiling water temperature: 98ºC nominally, but adjustable from90ºC to 99ºC• *Chiller compressor rating : 1/4HP HydroTap II, 1/6HP HydroTap• *Chilling system: fan-cooled condenser type• *Refrigerant: R134a• *Chilled water delivery rate: 4 litres per minute• *Chilled water delivery in one hour (200ml glasses): 175 glasses

HydroTap II, 125 glasses HydroTap• Energy consumption in sleep mode: 36 watt hours per hour• Energy saving in sleep mode: 30%• Operation: lever operated - push down for filling cups,

pull up with lock “on” for filling pots• LED indicators: filter change reminder, boiling and chilling

temperature, sleep mode indicators, safety lock reminder• Clock: digital readout with power-save sleep mode function• Under-counter case: corrosion resistant white powder coated zinc

seal with front filter access door.• Child proof safety lock• Inbuilt under-sink safe tray with leak detector• Tap Extention and font optional extra (As per picture)

* HydroTap Only, not applicable to BoilTap

HydroTap & BoilTapBoiling & Chilled water on tap - Brilliant!Instant boiling water for tea, coffee and cooking PLUS chilled water all on tap- Installed out-of-sight under counter, the Zip HydroTap and BoilTap are the ultimatein space saving convenience!

5

Note: Add 65mm to the depth to accomodate water and electrical fittings

Installation

Location• The tap should be positioned to the left and rear of a sink within the sink

drainage area• The tap should be mounted on a flat surface• The tap should be mounted at 45 degrees to the corner of the sink so

that it drains into the sink• The under-sink unit should be located as closely as possible to directly

beneath the tap• The under-sink unit must be installed with clearances of 80mm left and

right, 220mm above and 70mm rear• The water supply must be drinkable• The water supply must deliver at least 2 litres per minute at a minimum

dynamic pressure of 175 kPa• If static pressure exceeds 700 kPa, a 400 kPa pressure limiting valve must

be fitted• An isolating valve should be installed between the water supply and the

under-sink unit

Note: The cupboard containing the under-sink unit must be amply ventilated.Cupboard doors must be offset from cupboard by 4mm, using buffersprovided. Door vents must be installed to promote hot air displacementand allow adequate ventilation. In high use areas a booster fan isrecommended for cupboard ventilation

Electrical• To be wired to a minimum 15amp connection

Precautions• Young children should be supervised to ensure that they do not play

with the appliance. The appliance is not intended for use by young children.

• In some hard water areas where mineral scale accumulation can becomea problem, consideration should be given to the maintenance required.

• A suitable form of water treatment may be necessary

MODEL

HydroTap lHydroTap llBoilTap lBoilTap lI

W

440500188321

D

430465320405

H

337395334409

H

HydroTap only

Features:

• Delivers filtered chilled and boiling water• Instant filtered boiling water for tea, coffee and cooking• Designed to deliver boiling water within 2°C of boiling point• Boiled water delivery rate: 3 litres per minute• Chilled water delivery rate: 4 litres per minute• Two way operation for filling cups, glasses or pots• Patented vented system for reliable operation• Everything but the tap is hidden beneath the sink• LED indicators for showing when boiling and chilled water is ready• Built-in under-sink safe tray with leak detector• Child proof safety lock• More energy efficient and cheaper to run than traditional urns and kettles• Flexible installation• Concealed plumbing and electrical connections• Choice of installation - either mounted at a sink or on counter top with the unique tap font optional extra (As per picture)• Optional oversized levers for disable use• 5 micron triple action filtration is standard• Tap Extention and font optional extra (As per picture)

BoilTapInstant boiling water on your counter top - when you need it!

HydroTapBoiling and chilled water at an instant!

Features:

• Delivers instant filtered (BoilTap only), boiling water for tea, coffee and cooking• Gives you better tasting tea, coffee and cooking• Designed to deliver boiling water within 2°C of boiling point• Boiled water delivery rate: 3 litres per minute• Patented vented system for reliable operation• Everything but the tap is hidden beneath the sink• Chrome plated electronic tap with touch pads and LED indicators• Built-in under-sink safe tray with leak detector• Child proof safety lock• Optional filtration system• More energy efficient and cheaper to run than traditional urns and kettles• Flexible installation• Concealed plumbing and electrical connections• Choice of installation - either mounted at a sink or on counter top with the unique tap font (optional extra)• Award winning tap design to suit any stylish kitchen• Tap Extention and font optional extra (As per picture)

6

7

A neat undercounter installation - ideal for home or officeuse, bringing you chilled water on tap - on time, every time!

ChillTapZip brings you chilled water always on tap!(Filtration Kit optional)

Description

• Type: filtered under-sink water chiller with sink-mounted lever-action tap• Storage capacity: nominal 1.8 litres• Output capacity: up to 42 litres at a constant 11°C• Rating: 0.3kW• Chiller type: fan cooled condenser with a compressor rated at 0.25HP,

220V, AC 50Hz Single phase• Sink mounted tap: chrome plated brass lever action tap with swivel head• Under-sink case: white powder coated zinc seal corrosion resistant steel• Filtration: optional triple-action fully encapsulated, carbon activated filter

(Optional Kit)

Sample specification guide

ChillTap under-sink water chiller designed to comply with the following specification

1. To be designed to deliver 140 glasses per hour of chilled filtered water within the operating range of 5°C to 10°C

2. To have a compressor rated at 0.25HP3. Can be equipped with one five-micron fully encapsulated double action

carbon filter (Optional Kit)4. To be supplied with a sink-mounted, lever-action, swivel head carafe filler5. To have 15mm water connections

Installation

Location• The tap should be positioned to the left and rear of a sink• The tap should be mounted on a flat surface• The tap should be mounted at 45 degrees to the edge of the sink so it drains into

the sink when running• The under-sink chiller should be located as closely as possible to and directly under

the tap• The under-sink chiller must be installed with clearances of 50mm left, right, rear and

above• Filter should be mounted where readily accessible on the chiller or on the adjacent

cupboard wall

Plumbing• Water connections 15mm• Pressure relief valve set at 400 kPa maximum• Should be installed only by a licensed plumber• Plumbed directly to cold water supply

Venting• The cupboard containing the under-sink unit must be amply ventilated• Cupboard doors must be offset 4mm all round for ventilation if required

Electrical• To be wired to a minimum 15amp connection

9

ServiceValve

Cold Watersupply To Drain

Tun dish

Electricalwiring

15 amppower

connection200mm

20mm

150mm

65mm

1) Twin chambers separate boiling water from incoming cold water.Unlike single chamber heaters which mix incoming cold water with boiling water,reducing the temperature of the stored water significantly. Zip Hydroboil andHydroboil Pro technology keeps the cold water separate from the boiling waterin a separate storage chamber.

2) Steam-Heat-Boost™ system preheats incoming cold water.Zip Hydroboil and Hydroboil Pro preheats the incoming cold water with recycledsteam from the boiling water, dramatically improving thermal efficiency andreducing running costs. Zip Hydroboil and Hydroboil Pro emits no steam, and onstandby uses less power than a light bulb.

3) Silicon connecting tube controls the flow of preheated water.A silicon connecting tube controls the flow of water into the boiling chamber ata rate which allows the temperature to be maintained within 3° degrees of boilingpoint. You get boiling water, and only boiling water, every time you touch thetap.

Hydroboil and Hydroboil Pro Twinchamber technology for real energy savings

PRODUCT

3 litre Hydroboil Pro7.5 litre Hydroboil Pro2.5 litre Hydroboil5 litre Hydroboil7.5 litre Hydroboil10 litre Hydroboil15 litre Hydroboil25 litre Hydroboil50 litre Hydroboil

WIDTHmm

289318250318310340370510855

DEPTHmm

180198150150180205290290290

HEIGHTmm

431578431460460630630630630

Minimum clearance and typical installation

8

The Hydroboil RangeThe wall mounted boiling water systems that never run dry

Sample specification guide

Zip Hydroboil model number... designed to comply with thefollowing specification1. To be designed to contain water within 3°C of boiling point2. To embody twin chamber technology seperating the cold

water supply from the boiling chamber3. To retain steam within the heater by means of an internal

condensing system4. To have a Stainless Steel boiling chamber with service

access ports top and bottom5. To have built-in temperature controls that will automatically

cut off the power in the event of temperature control failure, boil dry cutout or a blocked vent pipe

6. To employ high temperature thermal insulation with provision for service access to the boiling chamber

7. To have a tap that has a safety lock to prevent boiling waterbeing dispensed inadvertently

8. To provide for concealed plumbing and electrical connections

No matter the application there is aZip Hydroboil to suit you - perfectly!Whether it is for home use or for a busyoffice canteen, you will never have towait for the kettle to boil again!

Installation

Location• Should be installed over a draining board, or over a work top

fitted with a drip tray – tap spout should be no higher than necessary to fill large pots• Minimum tap height above draining board for on-wall

maintenance is 200mm. Leave 150mm above, 65mm left and 20mm right, for servicing purposes

Plumbing• Designed for direct connection to a drinkable cold

water supply with a minimum pressure of 110 kPa and a maximum pressure of 400 kPa• A pressure reducing valve must be installed if water supply pressure is likely to exceed 400 kPa maximum• An isolating valve should be installed between the water supply and the heater

Venting• The vent must discharge to a safe visible position as, under certain conditions, the vent may discharge cold or hot water

and/or steam. The vent pipe outlet must be connected to a copper vent pipe which has a continuous fall, is no more than 3m long, and has no more than 3 right angle bends

Electrical• To be wired to a 15 amp outlet• For concealed electrical connection, connect a fixed or flexible cable from the rear directly to the terminal block

Precautions• Young children should be supervised to ensure that they do not play with the appliance. The appliance is not intended for

use by young children.• In some hard water areas where mineral scale accumulation can become a problem, consideration should be given to the

maintenance required. A suitable form of water treatment may be necessary

10

Description

• Type: twin chamber instant boiling water heater• Stainless Steel models• White Powder coated zinc seal models• Capacity: 3.0, 7.5 litres• Rating: 1.5kW (3.0 litres) 2.4kW (7.5 litres)• Heating element: long life incaloy sheathed embedded rod type• Thermostat: capillary type• Temperature control: electronic - PCB/probe• Boiling chamber: crevice-free Stainless Steel chamber with removable Stainless Steel access ports top and bottom• Outer case: Stainless Steel or corrosion resistant white powder coated zinc seal• Insulation: compressed high temperature insulation panels engineered for quick access to boiling chamber ports• Safety features: thermal cut-out integral to heating element; thermal cut-out on vent tube; safety lock on tap

PRODUCT

3 litre Hydroboil Pro7.5 litre Hydroboil Pro

CUPSREQUIRED

AT ANYONE TIME

15 - 1845 - 50

APPROX.RECOVERYRATE PERONE TIME

1.5 Cups2.5 Cups

ELEMENTRATING

kW

1.52.4

PHASEV

Single 220VSingle 220V

All the features and benefits of a ZipHydroboil but with stylish good looks.The Zip Hydroboil Pro not only adds anew dimension of functionality to yourkitchen but also one of class andsophistication.

The Hydroboil Pro

New Features

1) NEW long-life Stainless water cistern and boiling chamberFabricated from Stainless Steel and developed specifically for boiling water, the boiling chamber is the world’s first to feature both top andbottom access ports, giving total access for simple, easy removal of any accumulated sediment or mineral scale.

2) NEW fail safe double-action thermal protection systemThe heavy duty element has an auto-reset cutout which interrupts the power supply in the event of a failure in the water supply. A sensoron the vent tube also shuts off the power if it senses excessive steam emission. Double safety protection!

3) NEW long-life densely-compressed high temperature insulation panelsThe densely-compressed high temperature foam panels provide unbeatable thermal insulation.Thery are engineered for easy service access, and will last the life of the Zip Hydroboil unit.

Features

• Boiling water instantly for tea, coffee and cooking• Designed to operate 3°C of boiling point• New energy conserving “Cool Touch” tap provides

fingetip control, reduces heat loss and saves energy• New cool touch tap with safety lock prevents

boiling water being dispensed inadvertently• Push-Tap control for precision filling of cups,

locks ON for filling pots• Stainless Steel or white powder coated zinc seal case

WITHENERGY SAVINGSLEEP MODE

The wall mounted boiling water system that never runs dry

11

PRODUCT

2.5 litre Hydroboil5 litre Hydroboil7.5 litre Hydroboil10 litre Hydroboil15 litre Hydroboil25 litre Hydroboil50 litre Hydroboil

CUPSREQUIRED

AT ANYONE TIME

12 - 1525 - 3036 - 4550 - 6075 - 90

120 - 150250 - 300

APPROX.RECOVERYRATE PERONE TIME

1 Cup1 Cup1 Cup

1.5 Cups2 Cups3 Cups6 Cups

ELEMENTRATING

kW

1.51.51.52.42.43.0

1 x 7.2

PHASEV

Single 220VSingle 220VSingle 220VSingle 220VSingle 220VSingle 220VThree 380V

Features

• Instant boiling water for tea, coffee, and cooking• Designed to operate within 3°C of boiling point with thermal

temperature control• New energy conserving “Cool Touch” tap provides fingertip

control, reduces heat loss and saves energy• Two-way tap control for precision filling of cups, locks on for

filling pots• Fully automatic• Steam free• Optional filtration systems• Choice of brushed Stainless Steel or white powder coated• Able to deliver between 12 to 300 cups of boiling water at

one time depending on choice of model• Peak demand-loading is reduced considerably in comparison

to traditional kettles and urns• Concealed plumbing and electrical connections• SABS approved

Description

• Type: twin chamber instant boiling water heater• Capacity: 2.5, 5.0, 7.5, 10.0, 15.0, 25.0, 50.0 litres• Heating element: varying from 1.5 to 3.6 kW depending

on choice of model• Temperature control: thermal thermostat• Boiling Chamber: copper boiling and cistern chambers• Outer case: Stainless Steel or corrosion resistant white

powder coated zinc seal (epoxy coated)• Insulation: rockwool insulation panels engineered for

quick access to boiling chamber ports• Safety features: thermal cut-out to protect against

over-boiling and complications occurred during water supply interruption

HydroboilInstant boiling water at the touch of a lever!With boiling water for tea, coffee andcooking always on tap the Hydroboilfrom Zip will save you precious timein the kitchen.

905mm

346mm346mm 50mmfrom wall

173mm

REARSIDE

65mm

120mm770mm

Zip Chiller dimensions

General specification for Zip Chilmaster, Economaster and ChillTapCompressor: Hermatically sealed reciprocating type rated at 0.25 HP, 220V, AC 50Hz Single phaseCondensor: Fan cooled copper and aluminium finned typeEvaporator: Sealed copper tank. Storage capacity 1.8 litres cooled by a copper coil insideRefridgerant control: Capillary tube control. No moving partsRefridgerant: Refridgerant type R134aTemperature control: Enclosed preset thermostat. Easy accessibility by removing front panelElectrical connections: Insulated power cable, 2m long, with three prong 15amp moulded plugTop: Satin finish 304 Stainless Steel topBase: 1,2mm Heavy gauge galvanised steel

Whether it be a gym, canteen or factory the range ofchillers and water fountains by Zip are the only optionin chilled, filtered water for staff or public access.

Chilled & filtered water to the masses on tap!Zip Water Chillers

PRODUCT

ChillmasterChillmaster (No filter)EconomasterChillTapDrinking Fountain

LITRECAPACITY

42 Litres42 Litres42 Litres42 Litres

-

Sample specification guideChillmaster floor-standing water chiller, model ...designed tocomply with the following specification1. To be designed to deliver 140 glasses per hour of chilled2. To have a compressor rated at 0.25HP3. To have in-built five-micron fully encapsulated double action carbon filter

with the option of a sub-micron filter (Chillmaster only)4. To have Stainless Steel water bowl and outer case5. To have 15mm BSP water connections6. Built-in ‘S’ trap

• The simple way to have filtered chilled water on tap at your kitchen sink• Filters out dirt, rust, and other particles contaminating your drinking water• Reduces chlorine, chloramines and other offensive water treatment chemicals• Gives you better tasting drinking water by removing organic contaminants

InstallationLocation• The chiller should be positioned where it is easy for users to access• Water, drainage and power should all be available• The chiller should be mounted on a level surface• The chiller must be installed with clearances of 50mm left, right and rear

Plumbing• Water connections 15mm• Pressure relief valve set at 400 kPa• Should be installed only by a licensed plumber

Electrical• To be wired to a 15amp

905mm

346mm346mm 50mmfrom wall

173mm

REARSIDE

65mm

120mm770mm

Zip Chiller dimensions

12

Features• The effective way to put chilled filtered water on tap for staff or public access• Heavy duty, easy to-clean Stainless Steel bowl and Stainless Steel case or

white epoxy coated (economaster)• Delivers hygienic water at a rate of 42 litres per hour at a constant 11°C• Filter change reminder lights signals when filter cartridge replacement is due

(Chillmaster model with filter only)• Filter cartridges are as quick, simple and hygienic to change as a light bulb• Plumbed directly to the cold water connection• Water dispersed by bubbler and carafe spout

Description• Type: upright water chiller plumbed directly to the cold water connection with

lever-action carafe filler and bubbler• Storage output capacity: rated at 140 glasses per hour at less than 11°C• Rating: 0.3kW• Chiller type: fan cooled condenser with a compressor rated at 0.25HP• Carafe filler: Chrome plated brass lever action tap with swivel head• Bubbler: standard accessory• Outer case: brushed finish Stainless Steel case with front access panel• Filtration type: triple-action fully encapsulated, carbon activated filter• Warranty: one year from date of installation

Chillmaster & Economaster

ChillTapWaste water dish allows forinstallation where drainage is notavailable

Optional Accessories:

Stainless Steel Disposablecup dispenser

Wallmounted Chillmaster

Description• Type: wallmounted water chiller plumbed directly to the cold water

connection with lever-action carafe filler and bubbler• Storage output capacity: rated at 140 glasses per hour at less than 11°C• Rating: 0.3kW• Chiller type: fan cooled condenser with a compressor rated at 0.25 HP• Carafe filler: Chrome plated brass lever action tap with swivel head• Bubbler: standard accessory• Outer case: brushed finish Stainless Steel case with front access panel• Filtration type: triple-action fully encapsulated, carbon activated filter (optional)• Warranty: one year from date of installation

Wallmounted Chillmaster

Features• The effective way to put non-chilled filtered

water on tap for staff or public access• Ideal for factories, mines and schools• Non-chilled, free standing pedestal type in

brushed steel• Removable top section with pressed bowl and

provision for 40mm waste outlet• Reinforced floor fixing flange fixed to floor with

10mm masonary bolts• Bubbler and plumbing fittings excluded

(For product features, specifications and installation instructions please see page 7)

Drinking Fountain (Franke DF)

13

Features

• Specially formulated for use with Zip Hydroboil, Zip HydroTap and Zip Chiller units• Fully encapsulated filter cartridges simplify replacements• Filter changing is as simple and hygienic as changing a light bulb• Unique four plug head with double o-rings gives a tighter and firmer seal

Zip Filtration Systems

DIY Zip Filter Kits

Installed in any areas where water quality is cause of concern or a health risk

3 sub-micron carbon activated filter system that removes chlorides, odours and sedimentationfrom the water by way for a sealed cartridge

Complete ready to install kit includes:• 1 x Filter cartridge holder• 1 x Filter cartridge (150ml)• 1 x Bulkhead connectors 15 x 8mm• 1 x Flexi Hose 1m x 8mm• 1 x Stop cock valve with steel strainer

Sub Micron Triple-Action Filter for Boiling WaterDesigned to filter out cysts, such as cryptosporadium and giardia and reduce water cloudiness.Also inhibits the accumulation of lime scale in the boiling chamber of your instant boiling waterheater, filtering out particles, chlorine and other chemicals present, so as to bring you bettertasting tea and coffee.

Filtration TechnologyTriple-Action Filters

• Graded Density Filter MediaFilters are constructed so that the spaces betweenthe fibres are increasingly smaller towards the inside of the filter. With this design the larger particles are trapped on the outer layers and thesmaller ones towards the centre.

• Activated Carbon Carbon is made from a wide variety of materials such as wood, peat, nut shell and petroleum. Activation oxidizes all particles on the surfaces of the carbon particles, leaving the surfaces to attract and hold organics along with taste and odours like chlorine.

Triple-action water conditioning system

An optional triple-action under-sink filter conditions the water in three important ways:

• Removes dirt, rust and organic matter contaminating your water supply• Eliminates odours by reducing chlorine, chloramines and other chemicals• Reduces the accumulation of mineral scale and organic contaminants

• Scale InhibitionFDA compliant food grade consisting of Polyphosphate andSilicate compounds which are colourless, tasteless, and odourless. This unique combination works in two ways to inhibit scale and corrosion caused by hard water:-- Ties up calcium and magnesium.- Coats internal piping surfaces to reduce mineral adherence.

Specification and Installation

• When you specify a Zip Hydroboil or Zip Chiller unit you have the choice of no filter or a sub-micron triple action filter

• When you order a Zip HydroTap unit it is supplied completewith a filtration kit: comprising, filter cartridge, filter head,double non-return service valve, connecting tubing and installation instructions

• When installing a filter with any Hydroboil or Chiller it is neccessary that an isolation valve be fitted

Water Isolation Valve(Stop Cock)

DIY Zip Filter Kits

Installed in any areas where water quality is cause of concern or a health risk

3 sub-micron carbon activated filter system that removes chlorides, odours and sedimentationfrom the water by way for a sealed cartridge

Complete ready to install kit includes:• 1 x Filter cartridge holder• 1 x Filter cartridge (150ml)• 1 x Bulkhead connectors 15 x 8mm• 1 x Flexi Hose 1m x 8mm• 1 x Stop cock valve with steel strainer

Sub Micron Triple-Action Filter for Boiling WaterDesigned to filter out cysts, such as cryptosporadium and giardia and reduce water cloudiness.Also inhibits the accumulation of lime scale in the boiling chamber of your instant boiling waterheater, filtering out particles, chlorine and other chemicals present, so as to bring you bettertasting tea and coffee.

14

15

TRIFLOW - KUBUS

Features & Benefits:• Carbon Activated Cartridge• Water Purification Filter• Dispenses Hot, Cold and

Filtered Water• Solid Brass Construction• Chrome Plated• Guaranteed for 5 Years

on Body Construction.

Kubus - SwivelPRODUCT CODE:821052

Triflow Taps are revolutionary Kitchen taps that provide a hot, cold and filtered watersupply - all from a single integrated source. No more expensive and cumbersome bottledwater, no chemicals and no solutions. The unique water purification filtration systemsubstantially reduces chlorine tastes and odour, lead, andmicro-organisms found in normal tap water. Triflow Taps are easily maintainable and aresold complete with a Filter Cartridge if needed. The Cartridge life will depend on theinfluent water quality, pressure and overall usage and is not covered by the warranty.

Triflow Taps carry a warranty of 5 years on the body.

The mixer body is covered for defects in material and workmanship when properly installedand operated in accordance to the instructions provided. (A registration / warranty cardis enclosed with each tap giving full details of the product warranty).

HOW IT WORKSHot & Cold (Mixed)

Hot & Cold (Mixed)Water Outlet Purified Water Outlet

Braided StainlessSteel Hoses

Blue Tube

Hot WaterSupply

Cold WaterSupply

Green Tube

Non-ReturnValve

Filter

ZIP FILTER CARTRIDGE

PRODUCT CODE:490109

TRIFLOW FILTRATION KITS:

ZIP WATER PURIFICATION KIT

PRODUCT CODE:490114

KUBUS TRIFLOW KIT

PRODUCT CODE:821054

Includes:• Kubus Triflow Tap • Zip Water Purification

Kit• Male stud fitting with

taper BSP thread

Water FiltrationSystem - Triflow

Franke Kitchen Systems (PTY) LtdCALL CENTRETEL: 0861 372 653FAX: (+27-31) 450 6302email: enquirywss.fsa@franke.comwebsite: www.frankewss.co.za

HEAD OFFICE AND FACTORY1194 South Coast Road,Mobeni, Durban, 4092.South Africa.TEL: (+27-31) 450 6300FAX: (+27-31) 450 6303

BRYANSTON LIFESTYLE DESIGN CENTRECnr Bryanston Drive & Main Road,Bryanston, Johannesburg, 2191,South Africa.

CAPE TOWNSales Office,Unit 14, Phase 2, M5 Business Park,Eastman Road, Maitland,Cape Town, 7404, South Africa.

Showroom,M5 Business Park, 2A Camp Road,Maitland, Cape Town, 7404, South Africa