Product catalogue - evva.com · locks or special mortise locks that are oper-ated via a gear ring...

Product catalogueMechanical locking system MCS

90 minW

Z6

KM 547775

Reg.

Nr.

ON

-N20

0919

7

Key copying protection

Organisational protection thanks to an fidentification procedure for key duplicate

orders

Legal protection thanks to patents and findustrial property rights

Technical and technological protection fthanks to features such as permanent

magnetisation

Lock cylinder security

Picking protection fDrilling protection fSnapping and plug pulling protection fPicking resistance fBump key protection f

How you benefit

Maximum key copying protection fFor highly complex master key systems fEach lock and each key are unique fOne magnetic and two mechanical (profile fand locking pin) levels of coding

Samarium cobalt 5 permanent magnets fensure a long service life. They cannot be

re-magnetised or de-magnetised using

conventional methods

Dual authorisation queries during the flocking action

Optimum wear resistance fModular design f

Length deviations of 0.5 mm per cylinder side possible

MCS uses the elementary power of magnet-

ism. Its one magnetic and two mechanical cod-

ings guarantee triple security. Its permanent

magnetisation is durable and long-lasting. MCS

was developed by EVVA in close cooperation

with technical universities – for strict security

requirements and highly complex access hier-

archies.

System characteristics

Product catalogue, Release 01/11/2010Errors and misprints excepted. Subject to technical change without notice.

Mag

net

ic C

od

e Sy

stem M

CS MCS | Product catalogue 2010

1

Table of Contents Keys 2

Double cylinders 6

Thumbturn cylinders 16

Half cylinders 21

Round cylinders 23

Padlocks 26

Cam locks and switch cylinders 30

Cabinet cylinders 37

Rim cylinders 44

Portal cylinders 49

EMZY 51

Cam types 52

Accessories 54


Mag

net

ic C

od

e Sy

stem

MC

SMCS | Product catalogue 2010

2

Key made of an extremely durable nickel fsilver alloy

Recessed colour dot on key neck f


Technical data

Technical data

Ordering information


SL [system and key number] f

SL [system and key number] fColour dot [colour]: red, blue, green, fyellow, brown, black, ice green, violet,

dark red, aubergine, pink

Key With Colour Dot

Standard Key


Mag

net

ic C

od

e Sy

stem M


3

Technical data


Key cap made of plastic; fcolour: anthracite

Key upper section made of plastic; colour: fanthracite, red, blue, yellow, green.


SLKA [system and key number] fUnless otherwise specified, key has fanthracite colour or key upper section

in red, blue, green, yellow

Customised inscription (in addition to fsystem number and key number), e.g.

"garden"

Consecutive numbering of keys (keys fwith identical authorisations receive

consecutive number)


Technical data


SL [system and key number] designation/ fnumber as required by customer; up to

18 characters if technically possible

(no special characters)

Key With Additional Numbering

Key With Plastic Cap


Mag

net

ic C

od

e Sy

stem

MC


4

Technical data

Technical data

Key with integrated electronic identifica- ftion medium (contactless)

Key bow made of durable polycar- fbonate; colour: anthracite

Key with integrated electronic identifica- ftion medium (touch-sensitive)

Key bow made of durable polycar- fbonate; colour: anthracite



SL [system and key number] CCM1KES f(MIFARE 1k, anthracite)

SL [system and key number] CCM4KES f(MIFARE 4k, anthracite)

SL [system and key number] CCD4KES f(Desfire 4k, anthracite)

SL [system and key number] CCL1KES f(Legic 1k, anthracite)

Red or yellow cap colour available f

SL [system and key number] CEIRWES f(iButton R/W 512B)

iButton Combi-key

Proximity Combi-key


Mag

net

ic C

od

e Sy

stem M


5

Technical data

Key is designed to incorporate electronic fupgrade media (contactless and touch-

sensitive)

Key bow made of durable polycarbonate, fwithout electronics; colour: anthracite

Key can be retrofitted with an electronic fmedium by the customer


SL [system and key number] CE000TS f

Technical data

Key cover with integrated electronic fidentification medium for use in

Combi-key upgrade models

MIFARE 1 K identification medium fLegic 1 K identification medium f


CMM1KE0 fCML1KE0 f

Technical data

Key cover with integrated electronic fidentification medium for use in

Combi-key upgrade models

iButton R/W 512 B identification fmedium


CMIRWE0 f

MIFARE 1 K/Legic 1 K Combi-key Upgrade Medium

iButton R/W 512 B Combi-key Upgrade Medium

Combi-key Upgrade Models


Mag

net

ic C

od

e Sy

stem

MC


DZ Double Cylinder

6

Finishes


DZ cylinder length A/B, [finish], [security and fusage options]

Applications and usage

For mortise locks in accordance with fDIN or ÖNORM

For mortise locks in accordance with fEuropean technical standards

For mortise locks with profile cylinder fhole

Functional characteristics

Lockable on both sides with key fCam rotation: 360 degrees fCam removal position: 30 degrees f(from the short side)

Security features

Hard metal drilling protection in plug fand body

Pulling protection due to chrome-nickel fconnecting rod

Vertical key insertion and optimal fscanning of locking elements

Technical data

Cylinder body base material: brass fCylinder plug base material: brass fCam home position: 30 degrees fCam width: 9.3 mm fModular cylinder design f

Scope of supply

Locking cylinder with fixing screw f

Installation & operation

Easy cylinder installation in a prepared, fempty cylinder hole

Cylinder projecting length may not fexceed 3 mm for security-relevant doors

Cylinder fixed through a M5 fastening fhole

Cylinder lengths

Finishes Abbr

evia

tions

Stan

dard

Surc

harg

e

Polished brass PB Satin nickel NI Polished nickel PN Satin chrome CR Polished chrome PC Black BL Brown BW Satin brass BR PVD PVD


Mag

net

ic C

od

e Sy

stem M


DZ Double Cylinder | Options

7


DZ cylinder length A/B, [finish] BSZ f

BSZ - double cylinder with external key

override, danger function for double

cylinder

Permits operation of the cylinder even

when an authorised key is inserted in the

opposite side.


SSW – protection mechanism against

dust and weathering influences (dust

cover)

Spring-loaded shutter plates integrated

into the cylinder that automatically open or

close when the key is inserted or removed.

DZ cylinder length A/B, f[finish]

– SSW-BS (both sides)

– SSW-ES (one-sided, with symmetric cylinders)

– SSW-KS (short side)

– SSW-LS (long side)


Mag

net

ic C

od

e Sy

stem

MC



8

SEW - seawater resistant model

For cylinders exposed to more severe envi-

ronmental influences. Corrosion-suscep-

tible cylinder parts are supplied with a

special surface treatment.


DZ cylinder length A/B, [finish] fSEW

VdS-cylinder

VdS-certified cylinder for installation in

high-security areas. Increased resistance to

visible and non-visible opening techniques.

VdS-cylinders are manufactured according

to the currently valid VdS-guidelines.


DZ cylinder length A/B, [finish] fVdS


ZR10 cog-wheel cam

(10 teeth)

The cylinder is designed for multi-point

locks or special mortise locks that are

operated via a gear ring or a toothed rack.

DZ cylinder length A/B, [finish] ZR10 f

10 teeth


Mag

net

ic C

od

e Sy

stem M



9

BIF double cam

The cylinder is designed for manufacturer-

specified locks in Biffar doors.


DZ cylinder length A/B, [finish] BIF fCam position: 22 degrees, from short cylinder fside

Please observe the door manufacturer’s finstructions.

ZR18 cog-wheel cam

(18 teeth)

The cylinder is designed for multi-point

locks or special mortise locks that are oper-

ated via a gear ring or a toothed rack.


DZ cylinder length A/B, [finish] ZR18 f

STEN star cam

The cylinder is designed for ABUS bar locks

types PR1500 & PR1600.

Set to expire


DZ cylinder length A/B, [finish] STEN f

18 teeth


Mag

net

ic C

od

e Sy

stem

MC



10

GEFE – emergency key feature

A special emergency key can operate the

cylinder even when an authorised key is

inserted on the opposite side.


DZ cylinder length A/B, [finish] GEFE f

Double cylinder with shortened body

Cylinder with shortened body, also for use

in special metal-frame doors with inte-

grated security rose.


DZ cylinder length A/B, [finish] ZVS-(ES/LS/ fKS)

ZVS-ES (one-sided, with symmetric fcylinders)

ZVS-LS (long side) fZVS-KS (short side) f


Mag

net

ic C

od

e Sy

stem M



11


FL2 - double cylinder with free-wheel

function

Cylinder with 360 degree free-wheeling

cam when key is not inserted. Coupling

engaged when the key tip is inserted.

DZ cylinder length A/B, [finish], FL2 f

PA partner cylinder

The cylinder can only be operated when

an authorised key is inserted on the oppo-

site side.


DZ cylinder length A/B, [finish] PA f

USH differing locking hierarchy

The cylinder has different A/B hierarchic

authorisation levels, e.g. the outside can

only be operated by a super-ordinate key

while the inside can be operated with any

authorised key.


DZ cylinder length A/B, [finish] USH; fSpecification of locking authorisations per fcylinder side (A/B)


Mag

net

ic C

od

e Sy

stem

MC



12

exte

rnal

key

ove

rrid

e

dust

cov

er

sea

wat

er r

esis

tant

prot

ectio

n ag

ains

t br

eaki

ng o

ff

cylin

der

cert

ified

acc

to

VdS

cog

whe

el c

am (1

0 te

eth)

cog

whe

el c

am (1

8 te

eth)

Biff

ar d

oubl

e ca

m

star

cam

shor

tene

d bo

dy

part

ner

func

tion

diff

erin

g lo

ckin

g hi

erar

chy

free

whe

el c

am

four

-eye

s pr

inci

ple

BSZ

SSW

SEW

ARS

VD

S

ZR10

ZR18

BIF

STEN

ZVS

PA USH

FREI

DU

P

external key override BSZ - ● ● - ● ● ● ● ● ● - ● - -dust cover SSW ● - ● - ● ● ● ● ● - ● ● ● -sea water resistant SEW ● ● - - ● ● ● ● ● ● ● ● ● -protection against breaking off ARS - - - - - - - - - - - - - -cylinder certified acc to VdS VDS ● ● ● - - ● ● ● ● - - ● - -cog wheel cam (10 teeth) ZR10 ● ● ● - ● - - - - ● ● ● - -cog wheel cam (18 teeth) ZR18 ● ● ● - ● - - - - ● ● ● - -Biffar double cam BIF ● ● ● - ● - - - - ● ● ● - -star cam STEN ● ● ● - ● - - - - ● ● ● - -shortened body ZVS ● - ● - - ● ● ● ● - ● ● ● -partner function PA - ● ● - - ● ● ● ● ● - ● - -differing locking hierarchy USH ● ● ● - - ● ● ● ● ● ● - ● -free wheel cam FREI - ● ● - - - - - - ● - ● - -four-eyes principle DUP - - - - - - - - - - - - - -

Options overview

S = Standard

l Simple combination possible


Mag

net

ic C

od

e Sy

stem M



13

Double cylinder, Allen socket on one side

Can be operated with an authorised key on

one side and with a SW6 Allen key on the Flex

side.

Cam rotation is 360 degrees and cam removal

position is 30 degrees (from the short side).

Double cylinder, square socket on one side

Can be operated with an authorised key on one

side and with an 8mm square socket key on the

Flex side.

Cam rotation is 360 degrees and cam removal

position is 30 degrees (from the short side).


DZ cylinder length A/B, [finish] (ES/LS/KS) f[security, application and convenience

options]

Flex I6-ES fFlex I6-LS fFlex I6-KS f



options]

Flex 4K-ES fFlex 4K-LS fFlex 4K-KS f

Double cylinder, slot on one side

Can be operated with an authorised key

on one side and with a flat object on the

Flex side.

Cam rotation is 360 degrees and cam

removal position is 30 degrees (from the

short side).


DZ cylinder length A/B, [finish] Flex S (ES/LS/ fKS)

Flex S-ES (one-sided, with symmetric fcylinders)

Flex S-LS (long cylinder side) fFlex S-KS (short cylinder side) f


Mag

net

ic C

od

e Sy

stem

MC



14

Double cylinder, 11 mm three-square

socket on one side


one side and with an 11 mm three-square

key on the Flex side.



short side).


socket on one side


one side and with a 14 mm three-square




short side).



options]

Flex D11-ES fFlex D11-LS fFlex D11-KS f



options]



socket on one side


one side and with an 8 mm three-square




short side).



options]



Mag

net

ic C

od

e Sy

stem M



15

Double cylinder, blind on both sides

Double cylinder is blind on both sides; mor-

tise lock cannot be used.

For doors that must not be locked but

where the cylinder hole must be sealed.


DZ cylinder length A/B, [finish], BLIND f

Double cylinder, blind on one side


one side.

Other cylinder side is blind, cannot be oper-

ated.

Cam rotation is 360 degrees and

cam removal position is 30 degrees (from

the short side).


DZ cylinder length A/B, [finish], Flex BL-(ES/ fLS/KS)

Flex BL-ES (one sided with symmetric fcylinders)

Flex BL-LS (long cylinder side) fFlex BL-KS (short cylinder side) f


Mag

net

ic C

od

e Sy

stem

MC


16

Finishes

Cylinder lengths




Security features

Technical data

Scope of supply

Locking cylinder with thumbturn and ffixing screw




For house doors, connecting doors, flat fentry doors, security doors, metal frame

doors, ...

KZ cylinder length A/B (A=outer side; fB=inner side (thumbturn side)) [security and

usage options]

[finish]/[thumbturn design] fWhen thumbturn design is not specified: fAKN standard thumbturn

Can be locked from the outside with fa key

Thumbturn on the inside to lock and funlock the door

Cam rotation: 360 degrees f



If required, inside thumbturn can be fremoved with a tool and replaced with

another EVVA thumbturn


Hard metal drilling protection in the foutside plug and body

Pulling protection through chrome- fnickel connecting rod

Vertical key insertion for optimal fscanning of locking elements

Cylinder body base material: brass fCylinder plug base material: brass fCam home position: 30 degrees fCam width: 9.3 mm fModular cylinder design f

Finishes Abb

revi

atio

ns

Cyl

inde

r

AK

N, K

KN

, FK

N

RKN

, MK

N

OK

N, O

KN

A

GK

NPolished brass PB Satin nickel NI Polished nickel PN Satin chrome CR Polished chrome PC Black BL Brown BW Satin brass BR PVD PVD RAL colours RAL F2 anodized F2 F3 anodized F3

StandardSurcharge

KZ Thumbturn Cylinder


Mag

net

ic C

od

e Sy

stem M


17


KZ cylinder length A/B [A=outer side; fB=inner side (thumbturn side)] [security and

usage options]

[finish]/KKN f



usage options]

[finish]/RKN f


Technical data

Removable, cone-shaped thumbturn fwith grip recesses

Base material: brass fFinishes: satin nickel plated, satin fbrushed, polished lacquer

KKN Conical Thumbturn


Technical data

Removable, round thumbturn set off to fthe rear


RKN Round Thumbturn



usage options]

[finish]/AKN f


Technical data

Removable thumbturn with three grip frecesses


AKN Standard Thumbturn


Mag

net

ic C

od

e Sy

stem

MC


18



usage options]

[finish]/MKN f



usage options]

[finish]/FKN f


Technical data

Removable, knurled thumbturn with fmedium-sized serrations




usage options]

[finish]/GKN f


Technical data

Removable, round thumbturn set off to fthe rear


Or lacquered in RAL colours: blue fRAL5002; dark green RAL6012; yellow

RAL1004; green RAL6001; grey

RAL7038; red RAL3003; black RAL9005;

white RAL 9010; other RAL colours on

request

GKN Recessed Grip Thumbturn


Technical data

Stylishly shaped, removable, flat fthumbturn with 2 grip recesses

Particularly suitable for the elderly and fpeople with disabilities


FKN Flat Thumbturn

MKN Knurled Metal Thumbturn


Mag

net

ic C

od

e Sy

stem M


19



usage options]

[finish]/OKNA f



usage options]

[finish]/OKN f


Technical data

Removable, horizontal, light metal fthumbturn with two grip recesses

Base material: aluminium fFinishes: satin nickel plated, F2 anodized, fF3 anodized, polished gold colour


Technical data

Removable, vertical, light metal fthumbturn with two grip recesses

Base material: aluminium fFinishes: satin nickel plated, F2 fanodized, F3 anodized, polished gold

colour

OKNA Asymmetric Oval Thumbturn

OKN Oval Thumbturn


Mag

net

ic C

od

e Sy

stem

MC


20

exte

rnal

key

ove

rrid

e

dust

cov

er

sea

wat

er r

esis

tant

prot

ectio

n ag

ains

t br

eaki

ng o

ff

cylin

der

cert

ified

acc

to

VdS

cog

whe

el c

am (1

0 te

eth)

cog

whe

el c

am (1

8 te

eth)

Biff

ar d

oubl

e ca

m

star

cam

shor

tene

d bo

dy

part

ner

func

tion

diff

erin

g lo

ckin

g hi

erar

chy

free

whe

el c

am

four

-eye

s pr

inci

ple

BSZ

SSW

SEW

ARS

VD

S

ZR10

ZR18

BIF

STEN

ZVS

PA USH

FREI

DU

P

external key override BSZ - - - - - - - - - - - - - -dust cover SSW - - ● - ● ● ● ● ● - - - - -sea water resistant SEW - ● - - ● ● ● ● ● ● - - - -protection against breaking off ARS - - - - - - - - - - - - - -cylinder certified acc to VdS VDS - - ● - - ● ● ● ● - - - - -cog wheel cam (10 teeth) ZR10 - ● ● - ● - - - - ● - - - -cog wheel cam (18 teeth) ZR18 - ● ● - ● - - - - ● - - - -Biffar double cam BIF - ● ● - ● - - - - ● - - - -star cam STEN - ● ● - ● - - - - ● - - - -shortened body ZVS - - ● - - ● ● ● ● - - - - -partner function PA - - - - - - - - - - - - - -differing locking hierarchy USH - - - - - - - - - - - - - -free wheel cam FREI - - - - - - - - - - - - - -four-eyes principle DUP - - - - - - - - - - - - - -

Thumbturn cylinder with SOS function

The key-operated cylinder side is equipped

with a priority function. The cylinder can

even be operated from the outside when

manipulated (e.g. when the thumbturn is

being held on the inside).

Further options

See DZ options


cylinder length A/B, SOS (A=outer side; fB=inner side (thumbturn side)

[finish]/[thumbturn design] fWhen thumbturn design is not specified: fAKN standard thumbturn

Options overview

S = Standard

l Simple combination possible

Thumbturn Cylinders | Options


Mag

net

ic C

od

e Sy

stem M


21

HZ cylinder length A, [finish], [security and fusage options]

Can be operated with a key on one side fCam rotation: 360 degrees fCam removal position: 45 degrees fCam can be set to 8 positions (45°, f90°,135°, 180°, 225°, 270°, 315°, 360°)



Cylinder body base material: brass fCylinder plug base material: brass fCam home position: 45 degrees f(changeable)

Cam width: 9.3 mm fModular cylinder design f

For single-turn or multi-turn mortise flocks and other locks with a profile

cylinder hole

Key switch fActivating devices fGarage doors and roller shutters ffastened at the side


Cylinder should be flush with the fescutcheon or rose


Finishes

Cylinder lengths




Security features

Technical data

Scope of supply

Half cylinder with fixing screw


Finishes Abbr

evia

tions

Stan

dard

Surc

harg

e


HZ Half Cylinder


Mag

net

ic C

od

e Sy

stem

MC


22

HZ/S cylinder length A, [finish], f[security and usage options]


Fastened through two M4 threaded fholes at the rear

Fastened through one M5 threaded hole fat the side



Cylinder body base material: brass fCylinder plug base material: brass fCam home position: 45 degrees f(changeable)

Cam width: 9.3 mm fModular cylinder design f

Key switch fActivating devices fGarage doors, roller shutters, lifts, fescalators where fastening is from rear


Cylinder should be flush with the fescutcheon or rose when closed

Cylinder fixed through a M5 fastening fhole (at the side)

Cylinder fixed through two rear M4 ffastening holes (not included in supply)

Finishes

Cylinder lengths




Security features

Technical data

Scope of supply

Half cylinder with fixing screw f


Finishes Abbr

evia

tions

Stan

dard

Surc

harg

e


HZ/S Half Cylinder


Mag

net

ic C

od

e Sy

stem M


23

Finishes

Cylinder lengths




Security features

Technical data

Scope of supply

Locking cylinder with fixing screw


Hard metal drilling protection in plug fVertical key insertion for optimal fscanning of locking elements




Cylinder body base material: brass fCylinder plug base material: brass fCam home position: 22.5 degrees fCam width: 9.3 mm fCompact design f

Lockable on both sides with key fCam rotation: 360 degrees fCam removal position: 22.5 degrees f(from the short side)

For mortise locks designed for round fprofile cylinders (Swiss profile)

For house doors, connecting doors, fapartment doors, security doors, metal

frame doors and other doors

RDZ cylinder length A/B [finish] [security and fusage options]

Finishes Abbr

evia

tions

Stan

dard

Surc

harg

e


RDZ Round Double Cylinder


Mag

net

ic C

od

e Sy

stem

MC


24

Finishes

Cylinder lengths

RKZ Round Thumbturn Cylinder




Security features

Technical data

Scope of supply

Locking cylinder with thumbturn and ffixing screw


Hard metal drilling protection in the outside fplug and body

Vertical key insertion for optimal scanning fof locking elements



If required, inside thumbturn can be fremoved with a tool and replaced with

another EVVA thumbturn


Cylinder body base material: brass fCylinder plug base material: brass fCam home position: 22.5 degrees fCam width: 9.3 mm fCompact cylinder design f

Can be locked from the outside fwith a key

Thumbturn on the inside to lock and funlock the door

Cam rotation: 360 degrees f

For mortise locks designed for round fprofile cylinders (Swiss profile)

For house doors, connecting doors, fapartment doors, security doors, metal

frame doors and other doors

RKZ cylinder length A/B (A=outer side; fB=inner side (thumbturn side)), [finish],

[security and usage options] When thumb-

turn design is not specified:

AKN standard thumbturn

Finishes Abb

revi

atio

ns

Cyl

inde

r

AK

N, K

KN

, FK

N

RKN

, MK

N

OK

N, O

KN

A

GK

N

Polished brass PB Satin nickel NI Polished nickel PN Satin chrome CR Polished chrome PC Black BL Brown BW Satin brass BR PVD PVD RAL colours RAL F2 anodized F2 F3 anodized F3

StandardSurcharge


Mag

net

ic C

od

e Sy

stem M


25


Cylinder should be flush with the fescutcheon or rose


Finishes

Cylinder lengths




Security features

Technical data

Scope of supply

Round half cylinder with fixing screw


Hard metal drilling protection in plug f

Cylinder body base material: brass fCylinder plug base material: brass fCam home position: 45 degrees f(adjustable to 8 positions)

Cam width: 9.3 mm fCompact cylinder design f


For single-turn or multi-turn mortise locks fdesigned for round profile cylinders (Swiss

profile)

Key switches designed for round profile fcylinders

Activating devices fGarage doors, roller shutters f

RHZ cylinder length A f[finish], [security and usage options]

Finishes Abbr

evia

tions

Stan

dard

Surc

harg

e


RHZ Round Half Cylinder


Mag

net

ic C

od

e Sy

stem

MC


Cle

aran

ce

26


HPM (standard: hardened steel fshackle)


Elements and containers secured with a fhasp

Roller shutters fBarrier systems fChain barriers fSecurity fences f


Secures elementary fastening devices fPadlock with round security shackle fOperated on lower surface fLocking rotation: 90 degrees fKey can only be removed when locked f

Security features

Hard metal drilling protection in plug and fbody

Positively driven locking of the security fshackle

Technical data

Padlock base material: brass, satin nickel fplated

Shackle made of hardened, chemically nickel fplated steel or stainless steel

Shackle diameter: 8 mm fStandard shackle: clearance height: 30 mm fclearance width: 25 mm


Can be used with any hasp with an fopening > 8 mm

HPM Padlock


Mag

net

ic C

od

e Sy

stem M


27


Elements and containers secured with fa hasp




Security features



Hardened steel shackle protection f

Technical data


Shackle made of hardened, chemically fnickel plated steel





HPM BS (standard: hardened steel shackle) f

HPM BS Padlock


Mag

net

ic C

od

e Sy

stem

MC



HPM SSW (standard: hardened steel shackle), fshackle made of stainless steel on request f


Elements and containers secured fwith a hasp



Operated on lower surface fLocking rotation: 90 degrees fKey can only be removed when locked fWith dust cover f

Security features



Technical data


Shackle made of hardened, chemically fnickel plated steel or stainless steel


Dust cover f



28

HPM SSW Padlock With Dust Cover


Mag

net

ic C

od

e Sy

stem M


HPM Padlock With Extra Long Shackle


To secure vertically positioned hasps for fasteners

Roller shutters fChain barriers fSecurity fences f



Security features



Technical data


Shackle made of hardened, chemically fnickel plated steel or stainless steel

Shackle diameter: 8 mm f




HPM Shackle LH xx (shackle in LH fdesign always made of stainless steel)

Cle

aran

ce

Clearanceheight

29Product catalogue, Release 01/11/2010Errors and misprints excepted. Subject to technical change without notice.

Mag

net

ic C

od

e Sy

stem

MC


30

MB23 G Cam Lock


MB23 [finish], [cam]; if the standard cam is fused, no further information is necessary


Wooden and sheet metal boxes fMailboxes with medium cylinder hole fShowcase locks fEmergency key boxes fKey cabinets fWardrobes/lockers fCabinets f


Locking by cam fLocking rotation: 90 degrees fKey can only be removed in closed position fFlat side finishes prevent rotation fCylinder fixed at rear with a hex nut (AF 27) fStandard cam: 33.5 mm f

Security features

Flat finishes on both cylinder sides fprevent rotation

Technical data

Cylinder front face Ø 24.8 mm fWith M22 threads for AF 27 fastening nut fBase material: brass fSteel cam, blue galvanised f

Scope of supply

Locking cylinder with standard cam f5072, 33.5 mm

M22 fastening nut f


For material thicknesses up to 17 mm fCylinder hole Ø 23, flattened to 17.7 mm fCam secured by two rear screws f

Hole pattern

MCS | Product catalogue 2010


Mag

net

ic C

od

e Sy

stem M

CS

31

MB23SZ Switch Cylinder


MB23SZ [finish] f


As switch cylinder with integrated switch felement

For direct activation of circuits fPulse switch f

Scope of supply

Locking cylinder with switch elements fand connecting cable

AF 27 fastening nut f


Locking rotation: 90 degrees fOn/off switch function fKey can only be removed in one position f

Technical data

Cylinder front face Ø 24.8 mm fM23 threads for WS27 fastening nut fBase material: brass fF4 T7 Switch element fWith earth connection f


For material thicknesses up to 14 mm fCylinder hole Ø 23, flattened on one fside to 17.7 mm

Electrical connection must be performed fby a professional

Yellow/GreenBlackBlueRed

Yello

w +

Gre

en

Blac

kBl

ueR

ed



Mag

net

ic C

od

e Sy

stem

MC

S

32

MB23GT Cam Lock For Glass Doors


MB23 [finish], [cam], [fastening plate]; if the fstandard cam is used, no further informa-

tion is necessary


Glass showcase locks fGlass door cupboards f


Locking by cam fLocking rotation: 90 degrees fKey can only be removed in closed fposition

Flat side finishes prevent rotation fCylinder fixed at rear with a hex nut (AF f27)

Standard cam: 33.5 mm fBevelled fastening plate f

Security features

Flat finishes on both cylinder sides fprevent rotation

Technical data

Cylinder front face Ø 24.8 mm fM22 threads for AF 27 fastening nut fBase material: brass fSteel cam, blue galvanised fBrushed aluminium fastening plate f

Scope of supply


M22 fastening nut fFastening plate fPlastic disc f


For material thicknesses up to 17 mm fCylinder hole Ø 23, flattened to 17.7 mm fCam secured by two rear screws fPlastic disc to protect glass f

A1 B1 A2 B2 A3 B3 A4 B4 A5 B5 A6 B6

L 50 50 50 50 55 55 60 60 65 65 70 70

L1 25 25 30 30 35 35 40 40 45 45 50 50



Mag

net

ic C

od

e Sy

stem M

CS

33

MB30 Cam Lock


MB30 [finish], [cam]; if the standard cam is fused, no further information is necessary


Wooden and sheet metal boxes fShowcase locks fEmergency key boxes with interlocking fdevice

Key safes fKey cabinets fWardrobes/lockers fCabinets fFuse and junction boxes f


Locking by cam fLocking rotation: 90 degrees fKey can only be removed in closed position fFlat side finishes prevent rotation fCylinder fixed at rear with hex nut (AF 36) fStandard cam: 33.5 mm f

Technical data

Cylinder front face Ø 30 mm fM30 threads for AF 36 fastening nut fBase material: brass fSteel cam, blue galvanised f

Scope of supply


M30 fastening nut f


For material thicknesses between 1 and f20 mm

Cylinder hole Ø 30, flattened to 22 mm fCam secured by two rear screws f

Hole pattern



Mag

net

ic C

od

e Sy

stem

MC

S

34



Scope of supply



Technical data

ZB27 Cam Lock

Wooden and sheet metal boxes fMailboxes with large cylinder hole fMailbox systems with large cylinder hole fElectric junction boxes fFuse boxes f

ZB27 [finish], [cam]; if the standard cam is fused, no further information is necessary

Locking cylinder with standard cam f5072, 33.5 mm, without rose

Locking by cam fCam rotation: 90 degrees fKey can only be removed in closed fposition

Cylinder fixed by rear clamp plate fStandard cam 5072, 33.5 mm f

For material thicknesses between 1 and f8.5 mm (without rose)

Cylinder front face Ø 34 mm without frose, 50 mm with rose

Base material: brass fSteel cam, blue galvanised f

clamp platethickness = 2 mm



Mag

net

ic C

od

e Sy

stem M

CS

35

ZB27K Cam Lock


ZB27K [finish], [cam]; if the standard cam is fused, no further information is necessary


Wooden and sheet metal boxes fElectric junction boxes in outdoor areas fFuse boxes in outdoor areas f



Cylinder fixed by rear clamp plate fStandard cam 5072, 33.5 mm fWith dust cover f

Technical data

Cylinder front face Ø 34 mm without frose, 50 mm with rose

Base material: brass fSteel cam, blue galvanised f

Scope of supply

Lock cam with standard cam 5072, 33.5 fmm; dust cover, without rose


For material thicknesses between 1 and f8.5 mm (without rose)

Cam secured by two rear screws f

clamp platethickness = 2 mm



Mag

net

ic C

od

e Sy

stem

MC

S

36

For material thicknesses up to 28 mm fEuro profile cylinder hole fCam secured by two rear screws fCylinder fixed by four screws f


HMB, right/left specification necessary f[finish], [cam]; if the standard cam is used,

no further information is necessary


Wooden cupboards fShowcase locks f



Cylinder fixed by rear fastening plate fwith end-stop

Standard cam, 37.5 mm, heavy-duty fdesign

Security features

Hard metal elements to prevent drilling finto plug

Technical data

Base material: brass fHeavy-duty cam fSteel cam and fastening plate, blue fgalvanised

Scope of supply

Locking cylinder with standard cam, f37.5 mm, heavy-duty design

With fastening plate fWithout rose f


HMB Euro Profile Cam Lock


Technical data

For HMB cam lock f

Standard design A=37.5mm fSpecial lengths: A= 45, 50, 60, f70, 80mm

Cam in HMB cam lock

Rose E1



Mag

net

ic C

od

e Sy

stem M

CS

37



MRT25/31, [finish], f[lock case type]

MRT25/36, [finish], f[lock case type]

MRL25/31, [finish] fMRL25/36, [finish] f

MRT25/31 ESP, [finish], f[lock case type]

MRT25/36 ESP, [finish], f[lock case type]

MRL25/31 ESP, [finish] fMRL25/36 ESP, [finish] f


With Universal 4000 screw-on bolt lock ffor single locking

For cabinet doors fFor cupboard doors fWith Universal 4540 espagnolette lock for fmultiple locking

For cabinet doors with wide height clearance fFor cupboard doors with wide height fclearance


Locking rotation: 360 degrees fRear fixing screws for attachment to fUniversal 4000 screw-on bolt lock

(configured for door design)

ZVS Universal 4000 screw-on central lock fUniversal 4540 espagnolette lock f

Technical data

Cylinder front face Ø 25 mm without froseStandard cylinder length: 31 mm fBase material: brass f

Scope of supply

MRT25 round furniture cylinder with frose, designed for Universal 4000 lock

cases (door design),

Universal 4540


Universal clamp fixation to lock cases fEasily retrofitted to lock cases f

MRT25 / MRL25 Furniture Cylinder


Technical data

Cylinder front face Ø 25 mm without froseStandard cylinder length: 31 mm fBase material: brass f

Screw-on cylinder for Universal 4525 fespagnolette lock

Screw-on furniture cylinder for Universal f4525 lock case

Scope of supply

MRT25 round furniture cylinder with frose, designed for Universal 4525 lock

cases


Universal clamp fixation to lock cases fEasily retrofitted to lock cases f

MR25/31 ESP MR25/36 ESP Furniture Cylinder



Mag

net

ic C

od

e Sy

stem

MC

S

38


ZVZ25 [cylinder length], [finish] f


To lock drawers f(12 mm stroke)


Bolt rotation: 180 degrees fLocking rotation: 360 degrees fKey can be removed in open and closed fposition

Cylinder fixed by rear mounting plate f

Technical data

Cylinder front face Ø 25 mm without frose

Base material: brass f

Scope of supply

Central lock cylinder with rose f


For material thicknesses up to 21.9 mm fFixed at rear with fmounting plate

Cylinder can be used right/left f

ZVZ25 Central Lock Cylinder



Mag

net

ic C

od

e Sy

stem M

CS

39


DRZ28, [finish] f


To lock sliding doors f


Bolt stroke: 12 mm fLocked without key fUnlocked with key fCylinder fixed with integrated mounting fplate

Locked by pressing on the cylinder f

Technical data

Cylinder front face Ø 25 mm without frose

Cylinder length: 28.5 mm fBase material: brass f

Scope of supply

Push-in cylinder with rose f


Fixed at rear, integrated mounting plate f

DRZ28 Push-in Cylinder

Stroke 12 mm



Mag

net

ic C

od

e Sy

stem

MC

S

40


Universal 4000 f


Screw-on furniture lock for:

Furniture doors fCabinet doors fShutters f


Preset backset for doors: 25, 30 fand 35 mm

Preset backset for shutters: 20, f25 and 30 mm

Can be used on both left and right on fshutters and doors

Scope of supply

Lock Case Universal 4000, without ffastening material, without locking plate


Universal clamp fastening attached onto fthe lock case with side screws

Easily retrofitted to lock cases, even if lock fcases have already been installed

Security features

Solid lock case design fDouble bolt stroke (5 mm and 10 mm) f

Technical data

Compact installation dimensions: f52 x 54 mm

Fixed to door or shutter with three screws fAdjustable backset fLock case and bolt made of nickel-plated firon

Universal 4000 Screw-on Furniture Lock

Shutter

Diagram for left-hand doors



Mag

net

ic C

od

e Sy

stem M

CS

41


Universal 4540 with MRT/MRL 25 f


Espagnolette lock for furniture such as

Tall furniture doors and fTall cupboard doors f

which require more than just locking due to

their structure


Backset: 40 mm (D) fDesigned for full-length, 8 mm espagno- flette

Single rotation f

Security features

Solid lock case design fSingle rotation, 12 mm bolt stroke f

Technical data

Compact installation dimensions: f61 x 65 mm

Fixed with four screws fNickel-plated lock case and bolt fDesigned for 8 mm rotary bars, fflattened to 7 mm

Scope of supply

Universal 4540 lock case fAccessories: f2 hook bolts f1 angled strike plate f2 joint bolts fRod guide f


Universal clamp fastening attached onto fthe lock case with side screws

Easily retrofitted to lock cases, even if lock fcases have already been installed

Universal 4540 Espagnolette Lock For Furniture

Diagram for left



Mag

net

ic C

od

e Sy

stem

MC

S

42


MAR with MR25 f


Cabinet bolt lock for simple locking of:

Shutters fCabinet doors fCupboards f


Single rotation fDesigns: right/left and for shutters f10 mm bolt stroke f

Security features

Solid lock case design fSingle rotation, 10 mm bolt stroke f

Technical data

Lock case: bronzed f

Scope of supply

Lock case without accessories, without ffastening material


Easy installation with four screws f

MAR Cabinet Bolt Lock

D = BacksetB = Case width

D 30 35 40 50 60

B 55 60 65 75 85



Mag

net

ic C

od

e Sy

stem M

CS

43


MER left/right and for shutter [backset] f


Cabinet bolt lock for simple locking of:

Shutters fCabinet doors fCupboards f


For flush mount in cabinet doors/ fshutters

Single rotation fDesigns: right/left and for shutters f11 mm bolt stroke f

Security features

Solid lock case design fSingle-rotation, 11 mm bolt stroke f

Technical data

Lock case of galvanized steel f

Scope of supply

Lock case without accessories, without ffastening material


For installation into pre-milled lock frecess

MER Cabinet Bolt Lock

D = BacksetB = Case width

D B

29 49

34 54

39 59

49 69

59 79

Diagram for left



Mag

net

ic C

od

e Sy

stem

MC

S

44


AZ [finish] f


Designed for EVVA series K900 and fK9000 security rim locks


Locking rotation: 360 degrees fTail bar can be shortened at 5 mm fspaced nicks

Security features


Steel balls provide drilling protection for fthe cylinder fixing screws


Technical data

Cylinder body base material: brass fCylinder plug base material: brass fTail bar for door thicknesses up to 50 fmm

Cylinder Ø 34 mm fRose Ø 50 mm f

Scope of supply

Round cylinder with standard rose and fTwo M5 x 40 fixing screws f


Easy cylinder installation in prepared fround hole

Cylinder fixed through two M5 fastening fholes

Cylinder screws with pointed tips to fmake installation easier

AZ Rim Cylinder



Mag

net

ic C

od

e Sy

stem M

CS

45


AZG [finish] f


For third-party products such as rim locks

Scope of supply

Round cylinder with two M5 x 40 fixing fscrews



Security features




Technical data


Cylinder Ø 34 mm f





AZG Rim Cylinder



Mag

net

ic C

od

e Sy

stem

MC

S

46


AZI M5 [finish] fAZI M6 [finish] f


For rim locks of various manufacturers f

Round cylinder with rose and fTwo M5 x 40 fixing screws f



Security features




Technical data

Scope of supply





Cylinder fixed through two M5 or M6 ffastening holes


AZI Rim Cylinder

or



Mag

net

ic C

od

e Sy

stem M

CS

47


AZ [finish] f


Designed for rim locks .131, .132, .133, f.136

Scope of supply

Round cylinder with rose and two fM5 x 40 fixing screws



Security features




Technical data

Cylinder body base material: brass fCylinder plug base material: brass fTail bar for door thicknesses between f40 and 70 mm






AZ4050 Rim Cylinder



Mag

net

ic C

od

e Sy

stem

MC

S

48


AZ [finish] f


Designed for case locks .133, .136 f

Scope of supply

Round cylinder with rose and two M5 x f40 fixing screws


Locking rotation: 360 degrees fTail bar can be shortened at 5 mm spaced fnicks

Security features


Steel balls provide drilling protection for the fcylinder fixing screws


Technical data

Cylinder body base material: brass fCylinder plug base material: brass fTail bar for door thicknesses between 40 fand 70 mm






AZ 4063 Rim Cylinder

Tail bar short (standard)

Tail bar long



Mag

net

ic C

od

e Sy

stem M

CS

49


PDZ cylinder length A/B, [finish], [security fand usage options]


Portals with direct bolting fGarden doors without mortise lock but fwith direct bolting


Lockable on both sides with key fLocking bolt Ø 15 mm fBolt protrusion: 21.5 mm f15 mm stroke f

Technical data

Cylinder body base material: brass fCylinder plug base material: brass fAll scanning elements coated with fTriflon

Integrated locking bolt with f15 mm stroke f

Scope of supply

Locking cylinder with locking bolt, fwithout fixing screw


Cylinder installation in a prepared, fempty cylinder hole; designed for portal

cylinder

3 possible M5 fastening variations f

Security features



PDZ Portal Double Cylinder

Size A B L

36/36 36.5 36.5 73

36/41 36.5 41.5 78

41/41 41.5 41.5 83

Stroke 15 mm



Mag

net

ic C

od

e Sy

stem

MC

S

50


PHZ cylinder length A, [finish], [security and fusage options]


Portals with direct bolting fGarden doors without mortise lock but fwith direct bolting

Show window shields f


Lockable with key on one side fLocking bolt Ø 15 mm fBolt protrusion: 21.5 mm f15 mm stroke f

Security features



Scope of supply

Locking cylinder with locking bolt, fwithout fixing screw

Technical data

Cylinder body base material: brass fCylinder plug base material: brass fIntegrated locking bolt with f15 mm stroke f


Cylinder installation in a prepared, fempty cylinder hole for portal cylinders

3 possible M5 fastening variations f

PHZ Portal Half Cylinder

Stroke 15 mm



Mag

net

ic C

od

e Sy

stem M

CS

51


KZ cylinder length A/B, MZT35i [A=outer fside; B=inner side (thumbturn side)],

[security and usage options], [finish]




Small backset for the motorised fthumbturn on the thumbturn side,

particularly suited for metal frame doors

And for mortise locks with profile fcylinder hole

Motorised thumbturn with integrated fbutton for simple operation

Mechanical emergency release from the flocking side

Electronic control via external input units f(such as code keypad, wall reader, ...)

Scope of supply

Electronic motorised cylinder fThree 1.5 mm spacer discs fFixing screw f


Electronically operated, cabled, fmotorised cylinder

To lock/unlock locks fSimple night-and-day mode switch fInteractive learn mode for lock function f(single and double turn locks)

Security features

Shape-matched spacer discs allow seam- fless transition from the thumbturn to

the escutcheon

Technical data

Cylinder body base material: brass fCylinder plug base material: brass fCam home position: 30 degrees fCam width: 9.3 mm fModular cylinder design fMotorised thumbturn torque about 1 Nm f





Accessories

"MCU MI" micro controller for flush- fmounted installation, without power

adapter

"MCU NT" power adapter for standard fsupply for the "MCU MI" micro

controller

EVKA cylinder connection cable, 10 m fERK1 door contact, incl. 1.5 m connec- ftion cable (white or brown)

ERK4 door contact for metal doors with finstallation tray, incl. 1.5 m connection

cable

EKAO open cable transition, length f30 cm; incl. two end pieces (white,

brown or chrome)

ERKO bolt contact, incl. 2 m connection fcable with switch-over contact

ABDMK 35 thumbturn cover f

EMZY MZT35i Electronic Motorised Cylinder



Mag

net

ic C

od

e Sy

stem

MC

S

52

5072

5073

5087

5088

5089

5090

5091


For cam locks (plate installation fcylinders) MB23, MB30, ZB27, ZB27K,

MB23G, MB23GT, MB30MB, MB30

5092

5094

5095

5096

A 33,5 40 45 65

A 33,5 45 65

A 39,5 59 65,5

19 28 34 37 40 45 5055 60 65 70 75 80A

27 34 36 40 45 5055 60 65 70 75 80A

A 33,5 45

A 45 50

A 33,5 41 59

A 41 48,5 52,5

Cam types


Mag

net

ic C

od

e Sy

stem M


53

5097

5097S

5098

5099C

5099D

NSK

RENZ3

Hook

Hook 2

RENZ D

A 33,5 37 40 45 50 55 70

A 22 28

Special mailbox systems

EVVA, storage and Zwick mailbox systems

Cam types


Mag

net

ic C

od

e Sy

stem

MC


54



B1 f

B2 f

The conical, square-shaped key tip fensures doors can be opened and closed

easily.

Cam for profile cylinder hole f7 to 10 mm square-shaped pin fCylinder measuring unit f

Technical data

The conical, square-shaped key tip ensures fdoors can be opened and closed easily.

Square-shaped pin lock key, 6, 7 and 8 mm fCam for profile cylinder hole fSquare-shaped pin, 6 to 10 mm fHexagonal key, 3 mm f

Technical data

B2 Construction Key

B1 Construction Key



B3 f

B4 f

The conical, square-shaped key tip ensures fdoors can be opened and closed easily.

6, 7 and 8 mm square-shaped pin lock key fCam for profile cylinder hole fSquare-shaped pin between 7 and 10 mm fHexagonal key, 3 mm fCylinder measuring unit f

External square socket key, AF width 7 + 8 mm fExternal triangular socket key, 8 mm fPozidrive screw bit no. 2 fCountersunk screw bit size 3 fRadiator bleed key, AF width 5 mm fMeasurement scale up to 40 mm fRound cylinder carrier, nominal ø 22 mm fBottle opener on carrier fSquare drive, AF width 7 / 8 / 9 / 10 mm fHexagonal square drive, AF width 3 mm f



B3 Construction Key With Cylinder Measuring Unit

B4 Multi-Tool Construction Key

Composite fMaterial used

Composite fMaterial used

Material used

Material used

Die-cast, nickel plated f

Die-cast, satin nickel plated f


Mag

net

ic C

od

e Sy

stem M


55


Resistorx f

Tamper-proof cylinder fixing screw fApplications and usage

Optimum protection against tampering fwith special Resistorx

Countersunk head with TX35 f

Security features


Indispensable for house and garden, at fthe workplace, for vehicles, sport and

leisure equipment, industry and

agriculture, all kinds of machines, locks

as well as all electrical devices.

Security features

Free of silicone, hence it does not gum fsusceptible materials


Eliminates squeaking and creaking fHelps to jump start damp motors fLoosens jammed components fProtects against corrosion fCleans tough dirt and stains f

Multi-Spray 200 ml fMulti-Spray 400 ml f

Nirosta, stainless steel f

Designs

Designs

Resistorx Screws

Multi-Spray


Mag

net

ic C

od

e Sy

stem

MC


CC

10 0

1.07

-212

.02

EVVA Sicherheitssysteme GmbH Ing.-Julius-Raab-Str. 2 | A-2721 Bad Fischau-Brunn T +43 2622 42288 | F +43 2622 42288-34 [email protected] | www.evva.com

EVVA Sicherheitstechnologie GmbH Wienerbergstraße 59–65 | A-1120 Wien T +43 1 811 65-0 | F +43 1 812 20 71 [email protected] | www.evva.com

EVVA Sicherheitstechnik GmbHKiefholzstraße 287 | D-12437 Berlin-Treptow T +49 30 536 017-0 | F +49 30 536 017-5722 [email protected] | www.evva.de

EVVA Sicherheitstechnik GmbH Höffgeshofweg 30 | D-47807 Krefeld T +49 2151 37 36-0 | F +49 2151 37 36-5635 [email protected] | www.evva.de

EVVA Sicherheitstechnik GmbH Föpplstraße 15 | D-04347 Leipzig T +49 341 234 090-5 | F +49 341 234 090-5760 [email protected] | www.evva.de

A

D

Product catalogue - evva.com · locks or special mortise locks that are oper-ated via a gear ring...

Documents

Transcript of Product catalogue - evva.com · locks or special mortise locks that are oper-ated via a gear ring...