Product catalogue - Absolute Native Electronics · PRODUCT CATALOGUE (SENSORS & MODULES) Advantages...

PRODUCT CATALOGUE Sensors & Modules

e-Shop: http://www.baboon.co.in/eshop Customer support: [email protected]

In this Issue Temperature & Humidity sensors

Gas Sensors Current & Voltage Sensors

Proprioceptive Sensors Security / Alarm / Safety Sensors

Physical Parameter Detection Sensors Digital Input Sensors

PRODUCT CATALOGUE (SENSORS & MODULES)

Advantages of Arduino Arduino is a microcontroller on a circuit board which makes it easy to receive inputs and drive outputs. A microcontroller is

a integrated computer on a chip.Some examples of inputs would be a temperature sensor, a motion sensor, a distance sensor, a

switch and so forth. Some examples of outputs would be a light, a screen, a motor and so forth.

Programming Arduino You’ll need to download the Arduino Software package for your

operating system from the Arduino download page

(http://arduino.cc/en/Main/Software). You also need USB cable to

transfer the program from your computer to the board.

After opening the downloaded program select board type (Tools

> Board). The code you write for your Arduino are known as sketches. They

are written in C++. Every sketch needs two void type

functions, setup() and loop(). A void type function doesn’t return any value.

The setup() method is ran once at the just after the Arduino is powered up

and the loop()method is ran continuously afterwards. The setup() is where

you want to do any initialisation steps, and in loop() you want to run the

code you want to run over and over again.

For further details GOOGLE it... All the best !!!

Temperature & Humidity Sensor 1. Humidity sensitive resistor Sensor HR202L HR202 is a new kind of humidity Sensitive resistor made from organic macromolecule materials, it can be used in occasions like:

hospitals, storage, workshop, textile industry, tobaccos, pharmaceutical field, meteorology, etc.

Technical Specification:

Operating range: humidity(20- 95%RH) temperature(0-60Celsius)

Power supply: 1.5V AC(Max sine)

Operating frequency: 500Hz – 2kHz

Rated power: 0.2mW(Max sine) Central value: 31kΩ(at 25Celsius, 1kHz ,1V AC, 60%RH)

Impedance range: 19.8 – 50.2kΩ (at 25Celsius, 1kHz ,1V AC, 60%RH)

Accuracy: +- 5%RH

Hysteresis: +-1%RH

Long term stability: + -1%RH/year

Response time: <10s

Dimensions: with case 12*15*5mm, without case 8*10*0.7mm

2. Soil Moisture Meter testing Module, Soil Humidity Sensor Module Output is high level when the soil moisture deficit. Can be used in module plant watering device, and the plants in your

garden no need people to manage. Soil moisture module is most sensitive to the ambient humidity is generally used to detect the

moisture content of the soil Module to reach the threshold value is set in the soil moisture. The digital output D0 can be connected

directly with the microcontroller to detect high and low by the microcontroller to detect soil moisture. The digital outputs DO shop

relay module can directly drive the buzzer module, which can form a soil moisture alarm equipment. Analog output AO and AD

module connected through the AD converter, you can get more precise values of soil moisture


Operating voltage: 3.3V~5V

Dual output mode, analog output more accurate

With power indicator (red) and digital switching output indicator (green)

Having LM393 comparator chip, stable

Panel PCB Dimension: Approx.3cm x 1.5cm

Soil Probe Dimension: Approx. 6cm x 3cm

Interface Description(4-wire):

1. VCC: 3.3V-5V; 2. GND: GND; 3. DO: digital output interface(0 and 1); 4. AO: analog output interface

Catalogue: Sensors & Modules Date: 01-July-15

Buy Now: http://www.baboon.co.in/eshop/12-sensors

http://arduino.cc/en/Main/Software


3. Temperature and Humidity Sensor DHT11 The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to

measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but

requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds,

so when using our library, sensor readings can be up to 2 seconds old. Compared to the DHT22, this sensor is less precise, less accurate

and works in a smaller range of temperature/humidity, but its smaller and less expensiveComes with a 4.7K or 10K resistor, which

you will want to use as a pullup from the data pin to VCC.


Low cost

3 to 5V power and I/O

2.5mA max current use during conversion (while requesting data)

Good for 20-80% humidity readings with 5% accuracy

Good for 0-50°C temperature reading ±2°C accuracy

Body size 15.5mm x 12mm x 5.5mm

4 pins with 0.1″ spacing

4. DHT21 Humidity & Temperature Sensor This temperature & Humidity sensor is a wired version of the DHT21, in a large plastic body. It is a basic, low-cost digital temperature

and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal

on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing to grab data.


Type: AM2301

Accuracy resolution: 0.1

Measurement range: 0-100%RH

Temperature measurement range: -40℃ ~ +80℃

Humidity measurement precision: ±3%RH

Temperature measurement precision: ±0.5℃

Monobus digital output20cm-cable

Dimensions: 2.32 in x 1.02 in x 0.55 in (5.9 cm x 2.6 cm x 1.4 cm)

Output lead wire: Red (VCC), white (DATA), black (GND)

5. DHT22 Humidity & Temperature Sensor The DHT22 is a basic, low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so when using our library, sensor readings can be up to 2 seconds old. Simply connect the first pin on the left to 3-5V power, the second pin to your data input pin and the right most pin to ground. Although it uses a single-wire to send data it is not Dallas One Wire compatible! If you want multiple sensors, each one must have its own data pin! Technical Specification:

3 to 5V power and I/O

1-1.5mA measuring current

40-50 uA standby current

2.5mA max current use during conversion (while requesting data) Good for 0-100% humidity readings with 2-5% accuracy Good for -40 to 80°C temperature readings ±0.5°C accuracy No more than 0.5 Hz sampling rate (once every 2 seconds)

Body size 27mm x 59mm x 13.5mm (1.05″ x 2.32″ x 0.53″)

4pins, 0.1″ spacing

6. DS18B20 Waterproof Digital Temperature Sensor Probe This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measure something far away,

or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC so we suggest keeping it under

100°C. Because they are digital, you don’t get any signal degradation even over long distances! These 1-wire digital temperature

sensors are fairly precise (±0.5°C over much of the range) and can give up to 12 bits of precision from the onboard digital-to-

analog converter. They work great with any microcontroller using a single digital pin, and you can even connect multiple ones to the

same pin, each one has a unique 64-bit ID burned in at the factory to differentiate them. Usable with 3.0-5.0V systems.


Technical Specification: Stainless steel encapsulated waterproof temperature sensor DS18b20 temperature sensor 18B20 Original DS18B20 temperature sensor probe used chips Encapsulated waterproof high quality stainless steel tube anti-rust Stainless steel housing (6x50mm), leader length 100cm After each probe to undergo a rigorous testing packaged individually 3.0V~5.5V power supply 9~12-adjustable resolution Temperature range -55 ° c ~+125 ° c No external components, and unique single-bus interface Output lead wire: Red (VCC), white (DATA), black (GND)

7. MAX6675 K-type Thermocouple Temperature Sensor

MAX6675 is an American company with a cold junction compensation, linearity correction, thermocouple break detection ADC Serial K-type thermocouple Technical Specification:

Operating voltage: 3. 0 ~ 5. 5V

Internal integrated cold junction compensation circuit;

With a simple three serial interface;

Temperature signal can be converted into 12-bit digital

Temperature resolution of: 0. 25 Degree;

Cold junction compensation range: – 20 ~ + 80 Degree,

Embedded thermocouple break detection circuitry. Using SPI 3 wire communication K-type temperature probe Type K temperature range 0-800 degrees

Gas Sensor 1. MQ-135 Air Quality Sensor Hazardous Gas Detection module

A hazardous gas detection apparatus for the family, the environment, suitable for ammonia, aromatic

compounds, sulfur, benzene vapor, smoke and other gases harmful gas detection, gas-sensitive element

test concentration. Air quality sensor is for detecting a wide range of gases, including NH3, NOx,

alcohol, benzene, smoke and CO2. Ideal for use in office or factory, simple drive and monitoring circuit. Technical Specification:

The main chip: LM393, MQ135 gas sensing probe

Operating voltage: DC 5V

Dual signal output (analog output, and TTL level output);

Sulfide, benzene Department of steam, smoke and other harmful gases with high sensitivity

2. MQ-2 Smoke Gas LPG Butane Hydrogen Gas Sensor

MQ-2 gas sensor using gas sensitive material is to be clean air in the lower conductivity of Tin oxide (SnO2). When the sensor when

flammable gases are present in the environment in which the sensors conductivity with increasing concentration of combustible gas in

the air increases. Use a simple circuit to convert the changes in conductivity and output signal that corresponds to the concentration of

the gas. MQ-2 gas sensor higher sensitivity to liquefied petroleum gas, propane, hydrogen, detection of gas and other combustible

vapors are ideal. This sensor can detect a variety of flammable gas, is a low-cost sensors for many applications. Technical Specification:

Input voltage: 5 +/- 0.2V DOUT: Digital signal output

Good sensitivity to Combustible gas in wide range

High sensitivity to LPG, Propane and Hydrogen

Long life and low cost

Simple drive circuit


3. MQ-3 Alcohol Detector Sensor Module

It has four pins, and is extremely easy to use. What makes this listing so unique is that it has an analog output pin that you can

interface with an analog to digital converter, and a digital output that is supplied from a comparator output. The digital output is

normally high. When you blow into the sensor the output will swing from 5v (1) to 0v (0). You can calibrate this digital output to

swing the on-board variable resistor. You can calibrate the output to swing after you’ve had one beer, two beers, etc. Out the

digital output for easy alcohol detection. Get serious and use an ADC to play with the analog output. Technical Specification:

Input voltage: 5 +/- 0.2V

DOUT: Digital signal output

LED lights on when detected gas

AOUT: analog signal output, the output is the analog value of detected voltage

GND: Power supply negative pole;


The main chip: LM393, MQ-3 gas sensor

Current consumption = 150mA

4. MQ-4 Methane Detector Sensor

This is a simple-to-use compressed natural gas (CNG) sensor, suitable for sensing natural gas (composed of mostly Methane [CH4])

concentrations in the air. The MQ-4 can detect natural gas concentrations anywhere from 200 to 10000ppm.


Dual Signals output (analog output and TTL output)

TTL output signal is low level, allows to connect with SCM directly

Analog output 0~5V voltage

High sensitivity

Long working lifetime and stable performance

Quick response and recovery

Chipset: LM393 / MQ-4 sensor

Working voltage: DC 3~5V

Detecting range: 300~10000ppm

5. MQ-5 Methane LPG Liquid Propane Gas Sensor

They are used in gas leakage detecting equipments in family and industry, are suitable for detecting of LPG, natural gas , town gas,

avoid the noise of alcohol and cooking fumes and cigarette smoke. The MQ5 ( MQ-5 ) is used in gas leakage detecting equipment

in consumer and industry applications,this sensor is suitable for detecting LPG, natural gas, coal gas. Avoid the noise of alcohol,

cooking fumes and cigarette smoke. The sensitivity can be adjusted by the potentiometer.


Power supply needs: 5V

Interface type: Analog

Pin Definition: 1-Output 2-GND 3-VCC

High sensitivity to LPG, natural gas, town gas

Small sensitivity to alcohol, smoke

Fast response

Stable and long life

Simple drive circuit

Size: 40x20mm

6. MQ-6 Combustible Gas Propane / Butane / LPG / LNG Detector Sensor

This sensor module utilizes an MQ-6 as the sensitive component and has a protection resistor and an adjustable resistor on board.

The MQ-6 gas sensor is highly sensitive to LPG, iso-butane, propane and less sensitive to alcohol, cooking fume and cigarette smoke.

It could be used in gas leakage detecting equipments in family and industry. The resistance of the sensitive component changes as

the concentration of the target gas changes.



With DO switch signal (TTL) output and AO analog signal output

Power supply needs: 5V

Analog output voltage: 0~5V, the higher concentration, the higher voltage

High sensitivity for the propane and butane, LPG, LNG detection

Product size: 32mm (L) x 20mm (W) x 22mm (H)

Before use, please heat the board for about 20 seconds

7. MQ-7 CO Carbon Monoxide Detector Sensor

MQ-7 gas sensor has high sensitity to Carbon Monoxide. The sensor could be used to detect different gases contains CO, it is with

low cost and suitable for different application.


Signal output indicator;

Dual Signals output (analog output and TTL output);

TTL output signal is low level, allows to connect with SCM directly;

Analog output 0~5V voltage;

High sensitivity; Long working lifetime and stable performance;

Quick response and recovery

Chipset: LM393 + MQ-7 sensor

Working voltage: DC 3~5V

Detecting range: 10~1000ppm

8. MQ-8 Hydrogen Detection Sensor

This is a simple-to-use hydrogen gas sensor, suitable for sensing hydrogen concentrations in the air. The MQ-8 can detect hydrogen

gas concentrations anywhere from 100-10000ppm. This sensor has a high sensitivity and fast response time.


Gas sensitive material: SnO2

Conductivity increase according to flammable gas concentration.

With power and TTL signal output instruction

With TTL output and AO analog output

Effective signal is low level

Analog output voltage: 0~5V

Quick response recover.

9. MQ-9 Carbonic Oxide / Combustible Gas Sensor Module

MQ-9 gas sensor has high sensitity to Carbon Monoxide, Methane and LPG. The sensor could be used to detect different gases

contains CO and combustible gases, it is with low cost and suitable for different application.


Type: Analog

Detecting Type: Carbonic Oxide(Co), Flammable Gas

Rated Voltage: DC 3-5V

Detecting Range: 10-1000ppm

Pin Definition: AO-analog Output,DO-Digital Output,GND- Ground,VCC-Voltage To Current Converter

Total Size: 35 x 20 x 21mm/ 1.4″ x 0.79″ x 0.83″ (L*W*H)

Net Weight: 8g


10. GP2Y1010AU0F Air / dust detection sensor

Optical Dust Sensor (GP2Y1010AU0F) is especially effective in detecting very fine particles

like cigarette smoke, and is commonly used in air purifier systems. An infrared emitting diode

and a phototransistor are diagonally arranged into this device, to allow it to detect the

reflected light of dust in air. The sensor has a very low current consumption (20mA max, 11mA

typical), and can be powered with up to 7VDC. The output of the sensor is an analog voltage

proportional to the measured dust density, with a sensitivity of 0.5V/0.1mg/m3.


Supply voltage: 5-7V

Operating temperature: –10 to 65 Celsius degree

Consumption current: 20mA max

Current & Voltage Sensor 1. ACS712 Hall Current Sensor Module 5A / 20A / 30A model

The device consists of a precise, low-offset, linear Hall circuit with a copper conduction path located

near the surface of the die. Applied current flowing through this copper conduction path generates

a magnetic field which the Hall IC converts into a proportional voltage. The device consists of a

die. Applied current flowing through this copper conduction path generates a magnetic field which

the Hall IC converts into a proportional voltage. Technical Specification:

The current sensor chips: ACS712ELC;

Pin 5V power supply, on-board power indicator;

The module can be measured plus or minus 5/20/30 amps (as per model), corresponding to the

analog output of 185 mV / A; the output voltage is VCC / 2;

PCB board size: 31 (mm) x13 (mm);

2. Voltage Sensor Module 25V

A simple but very useful module which uses a potential divider to reduce any input voltage by a factor of 5. This allows you to use

the analogue input of a microcontroller to monitor voltages much higher than it capable of sensing. For example with a 0-5V analogue

input range you are able to measure a voltage up to 25V. The module also includes convenient screw terminals for easy and secure

connection of a wire. This module is based on principle of resistive voltage divider design, can make the red terminal connector input

voltage to 5 times smaller. Arduino analog input voltages up to 5 v, the voltage detection module input voltage not greater than

5Vx5=25V (if using 3.3V systems, input voltage not greater than 3.3Vx5=16.5V). Technical Specification:

Voltage input range : DC 0-25 V

Voltage detection range : DC0.02445V – 25V

Voltage analog resolution : 0.00489 V

Output Interface : “+ ” connected 5/3.3V, “-” connected GND, “s” connected Arduino AD pins

DC input interface : red terminal positive with VCC, negative with GND

Proprioceptive : Position and Orientation determination Sensor These may detected on basis of several parameters-

A magnetometer measures magnetic fields. Because the earth has a significant magnetic field, the magnetometer can be used as a

compass. As such it is useful to determine absolute orientation in the NESW plane.

An accelerometer measures accelerations. This is useful to measure changes in velocity (directly, as the acceleration is the first time

derivative of the velocity) and changes in position (by integrating the signal). They are usually used for measuring small movements.

Also note that gravity acts like a continuous acceleration upward (via Einstein's equivalency principle), so a multiple-axis accelerometer

can also be used as an absolute orientation sensor in the UP-DOWN plane.

A gyroscope measures either changes in orientation (regular gyro or integrating rate gyro) or changes in rotational velocity (rate

gyro).

The GPS (Global Positioning System) is a "constellation" of 24 well-spaced satellites that orbit the Earth and make it possible for

people with ground receivers to pinpoint their geographic location.


1. GY-273 Triple Axis Compass Magnetometer Sensor

The GY-273 module is based on the HMC5883L IC for low-field magnetic sensing with a digital interface for applications such as

low cost compassing and magnetometry. Technical Specification:

HMC5883L module (three-axis magnetic field module)

Model: GY-273

Using the chip: HMC5883L

Module Power supply : 3-5v

Communication: IIC communication protocol

Measuring range: ± 1.3-8 gauss

Size: 13.9 * 18.5

2. GY-521 MPU6050 Module 3 Axis analog gyro sensors+ 3 Axis Accelerometer Module

GY-521 MPU6050 Module 3 Axis analog gyro sensors+ 3 Axis Accelerometer Module, MPU-6050 3 Axis Gyroscope Module For

Arduino A 3-axis gyroscope and a 3-axis accelerometer are combined together on the same silicon die with an onboard Digital

Motion Processor. Technical Specification:

MPU-6050 modules (three-axis gyroscope + three-axis accelerometer)

Use the chip: MPU-6050

Power supply :3-5v (internal low dropout regulator)

Communication modes: standard IIC communications protocol

Chip built-in 16bit AD converter, 16-bit data output

Gyroscope range: 250 500 1000 2000 ° / s

Acceleration range: 2 4 8 16g

Immersion Gold PCB machine welding process to ensure quality

3. ADXL345 digital tri-axial acceleration due to gravity gradient module IIC/SPI transmission Module

ADXL345 is a small, slim, low-power three-axis accelerometer, Up to ± 16 g acceleration for high

resolution (13 digits) measurement. Number of digital outputs According to the 16-bit binary

complement format, Via SPI (3-wire or 4-wire), or access I2C digital interface. ADXL345 suitable for

mobile equipment applications. It can skew detection applications. Measure the static gravitational

acceleration, and to measure the dynamics of movement or impact causes the effect Speed. It has a

high resolution (4 mg/LSB), measuring approximately 0.25 ° tilt Angle changes. ADXL345 digital

outputs, such as the time of acceleration, without the need for Analog to digital conversion, saves system

cost and board space. In addition, the ADXL345 is a small, thin, ultra low power consumption 3-axis accelerometer, resolution (13),

measuring range ± 16G. Digital output data for the 16-bit binaries Complement format, accessible through the SPI (3-wire or 4-

wire), or I2C digital interface to access. GY- 3-axis gyroscope and a 3-axis accelerometer are combined together on the same

silicon die with an onboard Digital Motion Processor.

4. GY-NEO6MV2 new GPS module with Flight Control

GY-NEO6MV2 board features the u-blox NEO-6M GPS module with antenna and built-in EEPROM. This is compatible with various

flight controller boards designed to work with a GPS module. Technical Specification:

Power Supply Range: 3 V to 5 V

Model: GY-GPS6MV2

Ceramic antenna

EEPROM for saving the configuration data when powered off

Backup battery

LED signal indicator

Mounting Hole Diameter: 3 mm

Default Baud Rate: 9600 bps

Antenna size 12 * 12mm

Cable:20mm Immersion Gold PCB machine welding


5. Tilt Sensor Switch Angle Sensor

Tilt variety of products, dumping trigger an alarm, dumping off the sensor, tilt sensor. Tire Pressure Monitoring System (TPMS), bicycle

lights, digital photo frame rotation, screen rotation, flip video camera, anti-theft system Technical Specification:

using the highly sensitive switch SW-520D as the angle sensor.

Comparator output signal clean waveform is good, driving ability, than 15mA.

Working voltage 3.3V-5V

Output format: Digital switching output (0 and 1)

With bolt holes for easy installation

Small plate PCB size: 3.2cm x 1.4cm

Security / Alarm / Safety Sensor 1. HC-SR501 PIR Motion Sensor

PIR infrared sensor module is based on infrared technology, automatic control products. High sensitivity, high reliability, low power

consumption, low voltage operation mode. Widely used in various auto-sensing electrical equipment, especially for battery-powered

automatic control products.


Dimension: 3.2cm x 2.4cm x 1.8cm (approx)

Infrared sensor with control circuit board

The sensitivity and holding time can be adjusted

Working Voltage Range: DC 4.5V- 20V

Current drain:<60uA

Voltage Output: High/Low level signal:3.3V TTL output

Detection distance: 3--7M(can be adjusted)

Delay time: 5-200S(can be adjusted, default 5s +-3%)

Blockade time: 2.5 S (default)

Trigger: L: Non-repeatable trigger H: Repeat Trigger (default)

Work temperature:-20-+80°C

Trigger Method: L unrepeatable trigger / H repeatable trigger

2. HC-SR04 Ultrasonic Distance Sensor

The HC-SR04 ultrasonic sensor uses sonar to determine distance to an object – just like bats or dolphins do. This module offers excellent

range accuracy and stable readings in an easy-to-use package. It operation is not affected by sunlight or black material. Perfect

for collision avoidance on your next robotics or multirotor project!


Working Voltage : 5V(DC)

Static current: Less than 2mA.

Output signal: Electric frequency signal, high level 5V, low level 0V.

Sensor angle: Not more than 15 degrees.

Detection distance: 2cm-450cm.

High precision: Up to 0.3cm

Input trigger signal: 10us TTL impulse

Echo signal : output TTL PWL signal

Mode of connection: 1.VCC 2.trig(T) 3.echo(R) 4.GND


3. Flame sensor, Infrared receiver module, Ignition source detection module Flare the flame sensor, Infrared receiver module, Ignition source detection module can detect a flame or in a 760 nanometer

wavelength of ~ 1100 nm range of the light, lighter flame test distance of 80cm, for the greater flame, the farther the distance test.


The detection angle of 60 degrees or so, particularly sensitive to the flame spectrum

Sensitivity adjustable (shown in blue digital potentiometer adjustment)

The comparator output signal clean, good waveform, driving ability, more than 15mA

With adjustable precision potentiometer sensitivity adjustment

Working voltage 3.3V-5V

Output format: digital switching outputs (0 and 1)

4. Rain sensor Rain Sensor using high quality material on both sides, oversized 5.0*4.0CM, with nickel plated surface against oxidation, electrical

conductivity, and life more superior performance.


Comparator output signal clean wave good driving ability, than 15mA;

Power adjust sensitivity;

Rated voltage and 3.3V-5V

Output: digital switching output (0 and 1) and AO analog voltage output;

With fixing bolt holes for easy installation

Small Board PCB dimensions: 3.2cm x 1.4cm

Using wide LM393 voltage comparator

Connection mode:

VCC: supply cathode (3-5V); GND: connect to power negative; DO:TTL switch signal output; AO: analog signal output

5. SW-420 Vibration sensor The Vibration module based on the vibration sensor SW-420 and Comparator LM393 to detect if there is any vibration that beyond

the threshold. The threshold can be adjusted by the on-board potentiometer. When this no vibration, this module output logic LOW

the signal indicate LED light,And vice versa. It can be used for a variety of shocks triggering, theft alarm, smart car, an earthquake

alarm, motorcycle alarm.


rated voltage and 3.3V-5V

output: digital switching output (0 and 1)

a bolt-hole for easy installation

small Board PCB dimensions: 3.2cm x 1.4cm

using wide LM393 voltage comparator

the use of the company’s production of SW-420 normally closed type vibration sensors.

comparator output signal clean wave well, driving ability, 15mA

Physical Parameter Detection 1. BMP180 High Precision Digital Barometric Pressure Sensor

The BMP180 is a high-precision pressure sensors, small size, low power consumption, and can be used on mobile devices. Its excellent

performance and lowest absolute precision can reach 0.03hPa, and extremely low power consumption, only 3 μA. BMP180 hosts

using powerful 8-pin ceramic Leadless chip (LCC) ultra thin package, you can via the I2C bus directly connected to the microprocessor


Pressure range: 300~1100hPa (elevation 9000 m ~-500 m)

Power supply voltage: 1.8V~3.6V (VDDA), 1.62V~3.6V (VDDD)

LCC8 package: lead-free ceramic carrier package (LCC)

Size: 3.6mmx3.8×0.93mm

Low power consumption: 5 µA, in standard mode

High accuracy: low-power mode, the resolution of 0.06hPa (0.5 m)

High linearity mode, resolution of 0.03hPa (0.25 m)

With temperature output

I2C interface

Temperature compensation

Lead-free, in line with the RoHS standard

MSL 1-response time: 7.5ms

Standby current: 0.1 μA

No external clock circuit


2. TSL2561 Luminosity Sensor

The TSL2561 Luminosity Sensor Breakout is a sophisticated light sensor which has a flat response across most of the visible spectrum.

Unlike simpler sensors, the TSL2561 measures both infrared and visible light to better approximate the

response of the human eye. And because the TSL2561 is an integrating sensor (it soaks up light for a

predetermined amount of time), it is capable of measuring both small and large amounts of light by changing

the integration time.


The TSL2561 is capable of direct I2C communication and is able to conduct specific light ranges from 0.1 –

40k+ Lux easily. Additionally, the TSL12561 contains two integrating analog-to-digital converters (ADC) that

integrate currents from two photodiodes, simultaneously. Each breakout requires a supply voltage of 3V and

a low supply current max of 0.6mA.

Board Size: 1.7×1.3cm(approx)

3. Light brightness sensor

Can detect the brightness of the surrounding environment and strong (and photosensitive resistance comparison, directivity is good,

can sense fixed direction of the light source


sensitivity adjustable (shown in blue digital potentiometer control)

working voltage of 3.3 V – 5 V

output form:Light sensor

A analog voltage output

B digital switch output (0 and 1)

size: 3 cm * 1.6 cm

Module interface specifications (4 wire)

1. VCC external 3.3 V – 5 V voltage (can be directly and 5 V single-chip microcomputer and single chip microcomputer to 3.3 V)

2.GND external GND

3.DO small plate digital output interface (0 and 1)

4.AO small plate analog output interface

4. Sound sensor

Sound module sound intensity is the most sensitive to the environment, generally used for detecting ambient sound intensity.


can detect ambient sound intensity, usage note: this sound sensor can only identify the presence or absence of (based on the principle

of vibration) does not recognize the voice or sound with a specific frequency

adjustable sensitivity (shown in blue digital potentiometer adjustment)

operating voltage 3.3V-5V

output digital switching outputs (high and low level 0 and 1)

fixed bolt holes for easy installation

small Board PCB dimension: 3.2cm * 1.7cm

Module interface specifications (4 wire)

1.an external 3.3V-5V voltages VCC (5V directly connected to a single-chip computer 3.3V single-chip)

2.GND external GND

3.OUT small-plate digital output interfaces (0 and 10)

5. TCS3200 Color Sensor

TCS3200 Color Sensor is a complete color detector, including a TAOS TCS3200 RGB sensor chip and 4 white LEDs. The TCS3200

can detect and measure a nearly limitless range of visible colors. Applications include test strip reading, sorting by color, ambient

light sensing and calibration, and color matching, to name just a few.

The TCS3200 has an array of photodetectors, each with either a red, green, or blue filter, or no filter (clear). The filters of each color

are distributed evenly throughout the array to eliminate location bias among the colors. Internal to the device is an oscillator which

produces a square-wave output whose frequency is proportional to the intensity of the chosen color.


Single-Supply Operation (2.7V to 5.5V)

High-Resolution Conversion of Light Intensity to Frequency

Programmable Color and Full-Scale Output Frequency


Power Down Feature

Communicates Directly to Microcontroller

S0~S1: Output frequency scaling selection inputs

S2~S3: Photodiode type selection inputs

OUT Pin: Output frequency

OE Pin: Output frequency enable pin (active low), can be impending when using

Support LED lamp light supplement control

Size: 28.4×28.4mm

6. HX711 Weighing Sensor (Dual-Channel 24 Bit Precision A/D Module Pressure Sensor)

This module uses 24 high precision A/D converter chip hx711. It is a specially designed for the high precision electronic scale design,

with two analog input channel, the internal integration of 128 times the programmable gain amplifier. The input circuit can be

configured to provide a bridge type pressure bridge (such as pressure, weighing sensor mode), is of high precision, low cost is an

ideal sampling front-end module.Sound module sound intensity is the most sensitive to the environment, generally used for detecting

ambient sound intensity. Widely used in aerospace, mechanical, electrical, chemical, construction, medicine and many other fields,

used to measure force, pressure, displacement, strain, torque, acceleration.


Two selectable differential input channels

On-chip active low noise PGA with selectable gain of 32, 64 and 128

On-chip power supply regulator for load-cell and ADC analog power supply

On-chip oscillator requiring no external component with optional external crystal

On-chip power-on-reset

Simple digital control and serial interface: pin-driven controls, no programming needed

Selectable 10SPS or 80SPS output data rate

Simultaneous 50 and 60Hz supply rejection

Current consumption including on-chip analog power supply regulator: normal operation < 1.5mA, power down <1uA

Operation supply voltage range: 2.6 ~ 5.5V

Size:40mmx20mm/1.56″x0.79″(inch) (approx)

7. UVM-30A UV sensor

UV sensor can be used to build a warning system to protect against sunburn and skin cancer! This sensor detects 280-390nm light

most effectively. This is categorized as part of the UVB (burning rays) spectrum and most of the UVA (tanning rays) spectrum. The

provided example sketch calculates and send in UV index value to your controller. UVM-30A UV sensor module used in UV tester,

UV index meter, outdoor UV monitoring device, germicidal lamp equipment.


Operating voltage : DC 3-5V

Output voltage : DC 0-1V

Test accuracy : ± 1UV INDEX

Operating Current: 0.06mA max 0.1mA typ

Response Wavelength : 200nm-370nm

job stability : -20 ° -85 °

UV detection wavelength :200-370nm;

fast response , full interchangeability ;

Using a patented solid polymer structure , waterproof and dustproof easy to clean ;

linear voltage signal output ;

small size , suitable for mobile phones and other portable products.

size : 28mm X 12mm X height 10mm width

8. Infrared obstacle avoidance sensor

The sensor module on environment light adapted capacity strong, its has pair infra-red launches and receives tube, launches tube

launches out must frequency of infra-red, dang detection direction encountered obstacles real (reflection surface) Shi, infra-red

reflection back was receives tube receives, after compared device circuit processing zhihou, green indicates Lantern bright up, while

signal output interface output digital signal (a low level signal), can through potentiometer knob regulation detection distance,

effective distance range 2~30cm, work voltage for 3.3V-5V. The sensor’s detection range can be adjusted by potentiometer, with

little interference, easy to assemble, easy to use features, can be widely used in car robot obstacle avoidance, obstacle avoidance,

line count, and black and white line trail and many other occasions.


if the module detects obstacles ahead signal, the Green led is lit on the circuit board level and OUT port output low level signals,

the module detects the distance 2~30cm,


detection angle of 35 °,

detection range can be adjusted through potentiometer clockwise adjustment potentiometer,

sensing distance increases; counterclockwise adjustment potentiometer, detection range

reduction.

sensor active infrared reflection detection, so the reflectivity and shape is the key to detection

distance. Black detection distance, white most small objects from small and large distances.

Sensor output OUT can be connected directly to the monolithic integrated circuit IO mouth, or

you can directly drive a 5V Relay connection: VCC-VCC; GND-GND;OUT-IO

Comparator LM393, stable;

3-5V DC power supply module can be used for power supply. When the power is switched

on, the red power led is lit;

3mm of screw holes for easy fixing, installing;

Board size: 3.2CM*1.4CM

9. XD-58C Pulsesensor Pulse / Heart Rate Sensor

Pulse sensor is used to test heart rate sensors, students, artists, athletes, creators, games or mobile terminal developers can develop

heart-related and interactive works. Sensor can be worn on the finger or earlobe, It also has an open-source app program, you can

put your real-time heart rate displayed by the graph. In essence, a heart rate sensor integrated optical amplifier and noise elimination

circuit


Material:FR4

Power Supply Voltage:3V/5V

Magnification: 330

Wavelength: 609NM

Product Weight:15g

Package Dimensions:86*75*5mm

Digital input Sensor 1. TTP223B Digital capacitive Touch Sensor

The module is based on a touch-sensing IC (TTP223B) capacitive touch switch module. In the normal state, the module output low, low

power consumption; When a finger touches the corresponding position, the module output high, if not touched for 12 seconds, switch

to low-power mode. Jog type : the initial state is low , high touch , do not touch is low ( similar touch of a button feature )

Module can be installed in such as surface plastic, glass of non-metallic materials. In addition to the thin paper ( non-metallic ) covering

the surface of the module , as long as the correct location of the touch , you can make hidden in the walls, desktops and other parts

of buttons


Power Supply Voltage:2V/5V

Output Voltage 0.3-0.8VCC

Response time (low power mode) 220mS

Response time (touch mode) 60mS

Can replace the traditional touch of a button

2. 4 / 8 / 16 – way Digital capacitive Touch Sensor (4 key board TTP224 / 8 key board TTP226 / 16 key board TTP229)

The device built in regulator for touch sensor. Stable sensing method can cover diversity conditions. Human interfaces control panel

links through non-conductive dielectric material. The main application is focused at replacing of the mechanical switch or button. Can

independently handle the 4 / 8 / 16 touch pads with 4 / 8 / 16 direct output pins.


Onboard power light

Working voltage: 2.4 V to 2.4 V

Modules, you can set the output mode, key output mode, the longest time and fast/low power output

3. MFRC-522 RC522 RFID RF IC card sensor

RC522 chip:

MF RC522 is applied to 13.56MHz contactless communication highly integrated chip card reader, is NXP for the “Three Tables”

application launch of a low-voltage, low-cost, small size and non-contact card reader chip, smart instrumentation and portable

handheld devices developed better choice. MF RC522 using advanced modulation and demodulation concept completely integrated

in all types of 13.56MHz passive contactless communication methods and protocols. Support 14443A compatible transponder signals.

The digital part handles ISO14443A framing and error detection. In addition, support fast CRYPTO1 encryption algorithms,


terminology validation MIFARE products. MFRC522 supports MIFARE Series higher speed non-contact communication, two-way data

transfer rates up to 424kbit / s. As a highly integrated 13.56MHz card reader new family of chips, MF RC522 MF RC500 and MF

RC530 and there are many similarities, but also have many features and differences. It is between the host communication using SPI

mode, helps to reduce connection, reduce PCB board size and cost.

RFID module:

MF522-AN module adopts Philips MFRC522 original reader circuit chip design, easy to use, low cost, suitable for equipment

development, development of advanced applications such reader users, the need for RF card terminal design / production of the

user. This module can be loaded directly into a variety of readers molds. Module uses voltage of 3.3V, through the SPI interface

simple few lines can be directly connected to the user any CPU board communication module can guarantee stable and reliable work,

reader distance;


Current :13-26mA / DC 3.3V

Idle Current :10-13mA / DC 3.3V

Sleep current: <80uA

Peak current: <30mA

Operating Frequency: 13.56MHz

Supported card types: mifare1 S50, mifare1 S70, mifare UltraLight, mifare Pro, mifare Desfire

Product Physical Characteristics: Dimensions: 40mm × 60mm

Environmental Operating temperature: -20-80 degrees Celsius

Environment Storage temperature: -40-85 degrees Celsius

Relative Humidity: 5% -95%

Module Interface SPI Parameters

Data Transfer Rate: Max. 10Mbit / s

4. Dual Axis XY Joystick sensor

This module combines two potentiometers and a pushbutton switch into a solid mechanical package with an ergonomic thumb dome.

Perfect for controlling motors, servos, etc. The potentiometers track the position of the joystick in two dimensions and the button

responds to downward pressure. Springs pull the joystick back to the center position. This joystick provides a smooth, fluid motion,

strong click reply and a straight forward interface.


There are 5 pins on the board: VCC, GND, X, Y and Button. Connect the module using 5V power supply with VCC and GND. The

joystick status can be read from the X,Y and utton pins.

When using the 5V power supply, the default analogue output for X,Y is 2.5V. With the direction of the arrow, the voltage goes up

to 5V and the opposite direction it goes down to 0V.

This module uses a 5V power supply. The PS2 set the two-channel analog output module and one channel of the digital output, the

output value respectively corresponding to (X, Y) axis offset, its type is analog; button indicates whether the user pressed in the Z-

axis, its type digital switching amount. Module integrated power indicators which show the working status. Applicable on the Arduino

sensor expansion board plug.


Connections:

+ 5V

- GND

B button to receive a digital IO ports

X X-axis offset, the use of analog IO port read out

Y Y-axis offset, the use of analog IO port read out


Absolute Native Electronics

C-465, Ground Floor, Sector: Beta-1,

Greater Noida 201308 Uttar Pradesh

Call us +91.9958455050

Email: [email protected]

Store Information Absolute Native Electronics

SHOP AT ANE TO GET VARIOUS DEALS AND DISCOUNTS. YOU

ALSO GET SPECIAL BENEFITS.

LOYALTY POINTS

GET 5 LOYALTY POINTS ON PURCHASE OF RS. 100

REFERRAL PROGRAM

GET RS. 50 VOUCHER ON SUCCESSFUL REFERRAL OF YOUR

FRIEND. YOU NEED TO COMPLETE 1 SUCCESSFUL ORDER TO

BECOME REFERRER.

[Your free discount coupon goes here]

Why ANE?

Product catalogue - Absolute Native Electronics · PRODUCT CATALOGUE (SENSORS & MODULES) Advantages...

Documents

Transcript of Product catalogue - Absolute Native Electronics · PRODUCT CATALOGUE (SENSORS & MODULES) Advantages...