PRODUCT CATALOGUE 2016 - 2018 - Hammersmith · 2019-03-21 · Custom Manufacturing : We do have the...

PRODUCT CATALOGUE 2016 - 2018

2 Contents hammersmith.com.auSTAIRCASE & HANDRAIL PARTS TREATED TIMBER PRODUCTS

EZIRAIL 2.0 4-5 VERANDAH POSTS & WALL PLATES 33-34

HERITAGE RAIL 6 POST MOULDS 34

ZIPBOLT 7 ROOF FINIALS 35

VICTORIAN RAIL 8 ROSETTES 35

MONO RAIL 8 VERANDAH & EAVE BRACKETS 36

PRESTIGE RAIL 8 BALUSTERS 37

DESIGNER RAIL 9 SPINDLES 37

EZIRAIL 50 - FULL ROUND 10 EXTERIOR HANDRAIL 38

TREADS & RISERS 10 WINDOW CANOPIES 38

BALUSTERS - METAL 11 FENCE POST CAPITALS 39

BALUSTERS - TIMBER 12 CORBELS & FURNITURE COMPONENTS

HANDRAIL BRACKETS 12-14 ARCHITRAVE BLOCKS 41

TRADITIONAL POSTS 15 COLUMNS 41

POST CAPS 16 CORBELS & CARVINGS 42-43

EXTENSION POSTS 16 CABRIOLE LEGS 44

PRESTIGE POSTS 17-18 ROUND TAPERED LEGS 45

STAINLESS STEEL WIRE CABLE 19 LOUNGE & CHEST LEGS 46

STAINLESS STEEL WIRE CABLE FITTINGS 20-21 TABLE LEGS 47

WIRE CABLE DIY TOOLS 22 PLUGS, KNOBS, FINIALS, SPINDLES & CURTAIN RINGS 48

STAINLESS STEEL SQUARE TUBE & FITTINGS 23 TITEBOND WOOD GLUES & ADHESIVES

STAINLESS STEEL ROUND TUBE & FITTINGS 24-25 GLUES & ADHESIVES 50-51

STAINLESS STEEL RECTANGLE TUBE & FITTINGS 26

STAINLESS STEEL SLOTTED TUBE & FITTINGS 27

STAINLESS STEEL GLASS CLAMPS 28

STAINLESS STEEL GLASS STANDOFFS 29

STAINLESS STEEL GLASS SPIGOTS 29

STAINLESS STEEL READY-TO-USE POSTS 30

PAGE PAGE

For the most up to date product and price information, please visit our website; hammersmith.com.au

Since 1946 ...HAMMERSMITH WOODTURNERS PTY LTD49 HOCKING STBROMPTON SOUTH AUSTRALIA 5007

PHONE 08 8346 8211FAX 08 8346 0135EMAIL [email protected]

Product Specifications : All measurements shown in this catalogue are in millimetres (unless stated otherwise) and should be regarded as a guide only. Slight variations may occur.

Product Uses : Due to the vast range of uses our products could be put to, the suggestions that we make should only be seen as a guide, and we offer no guarantee regarding the suitability of a particular product for any use.

Custom Manufacturing : We do have the facilities to manufacture custom products. We encourage you to speak to us if you have an idea for a product that we do not show in this catalogue.

Ted Groth, Geoff Groth, Wyatt Groth & Kevin Johns ..... 70 Years of Experience

STAIRCASE and HANDRAIL PARTS

4 EZIRAIL 2.0

CODE DESCRIPTION OTHER INFORMATIONJH130 50 Ø Handrail (with 32mm Flat Base) Conforms to Australian Standard AS1428.1-2009 “Design for Access & Mobility”.

JH131 90º Bend (55mm Internal Radius) Used on internal or external 90º corners; or where you need to return to the wall.

JH132 45º Bend Used on internal or external 45º corners.

JH133 37º Ease Up Used on stairs to change the handrail from a horizontal plane to a 37º incline.

JH134 37º Ease Over Used on stairs to change the handrail from a 37º incline to a horizontal plane.

JH135 End Cap The easy way to round the ends of the handrail.

JH136 180º Over Scroll Maintains a 50mm clearance through 180º.

JH137 53º Ease Up Used on stairs to change the handrail from a 37º incline to a 90º incline.

JH138 90º Ease Over Used on stairs to change the handrail from a 90º incline to a horizontal plane.

ID115 60 x 16 Ø Joining Dowel Used to join the bends to the handrail.

IF121 High Usage Drilling Jig Drills the ends of the handrail with a 16 Ø hole to enable accurate joining with bends.

IF147 Low Usage Drilling Jig Drills the ends of the handrail with a 16 Ø hole to enable accurate joining with bends.

EZIR

AIL

2.0

32

44

50

JH130

JH131 JH132

JH133 JH134

JH135

JH136

For available timbers, please refer to the latest price list | For detailed CAD drawings, please go to our website

hammersmith.com.au

Alsoavailable ina full 50mmround. Refer

page 10

JH137

JH138

EZIRAIL 2.0 5

EZIRAIL 2.0 - The Facts ...

Why is it called EZIRAIL 2.0 ?Our original concept of the EZIRAIL, when we released it 15 years ago, was to produce a simple but stylish round hand rail design that could easily be combined with various angled bends to produce continuous timber hand railing for use in domestic, commercial and aged care applications.

The 2.0 is our way of showing the first substantial design change to the range since its original release. These changes include;- Changing the design of the handrail by increasing the flat from 19mm to 32mm.- Totally revamping the range of bends available, so that now all of the bends have a flat on the bottom that matches the handrail exactly.

These changes not only simplify the range, but also improve the overall quality, look and ease of installation.

Does it conform to Australian Standards ?The rail and bends have been designed to meet Australian Standard AS1428.1-2009 “Design for Access and Mobility”. This is critical when used in aged care facilities, hospitals, wheel chair ramps etc.

For domestic use, these standards do not generally need to be met. For more information on the standards, go to www.standards.com.au

What timber does it come in ?A select grade Victorian Ash (also known as Tasmanian Oak or Australian Oak). This timber has been chosen for a number of reasons;- It is sourced from Australian sustainably managed forests, which means it is readily available and not subject to wild price fluctuations due to changes to the exchange rate of the Australian dollar.- It is hard, reasonably colour consistent (pink-grey colour), and only contains occasional minor blemishes.- It can be finished with paint, clear polish or stained to match other timbers.

How does the drilling jig work ?The drilling jig is used to more easily join the bends and end cap to the handrail.

Once you have cut the handrail to the desired length, the jig will allow you to accurately drill a 16mm hole in the centre of the end of the handrail; to which an end cap or bend (comes pre-drilled) can be joined using a joining dowel (ID115) with a timber glue. Once the glue has dried, a light sanding may be required to smooth the join before finishing with a paint or polish coating.

If you have only a few holes to drill, then you could probably get away without using the jig and doing it free-hand; whereas if you have more than a few holes to drill, then the Low Usage version (IF147) would be perfect.

For installers who plan on using the EZIRAIL on a regular basis, the High Usage version (IF121) would be a better long term option.

ID115 IF121 IF147

hammersmith.com.au


6 Heritage Rail

CODE DESCRIPTION OTHER INFORMATIONJH005 Heritage Rail without Rebate

JH006 Heritage Rail with Rebate 42 x 10mm rebate to suit timber balusters.

JH007 Base Rail with Rebate 42 x 10mm rebate on one side and 16 x 8mm rebate on the other.

JH008 Infill with Rebate Used for infill between timber balusters or rotate and used for 16sq metal balusters

JH014 53º Ease Up Cut back to 37º for an ease up, or mitre one end and create a gooseneck.

JH021 End Scroll Fix to the end of the handrail using a 16mm dowel.

JH023 Level 90º Bend

JH033 Left Volute (aka Scroll) Overall width is 260mm.

JH034 Right Volute (aka Scroll) Overall width is 260mm.

Herit

age

Rail

pictures down side

Trim the JH014 back to make a 37º ease-up

Trim the JH014 back to make a Gooseneck

65

65

JH005

JH006

JH007

JH008

JH033

JH021

JH023

JH014

JH034


hammersmith.com.au

Zipbolt 7

CODE DESCRIPTION OTHER INFORMATIONIF154 Slipfix Railbolt (#13.801) Used to join handrail between 2 posts on a level plain. (Overall length is 50mm).

IF155 ST-Maxi UT (#13.500) Used to join handrail to handrail on a level plain. (Overall length is 90mm).

IF156 Mitre-Midi UT (#11.600) Used to join handrail to handrail at a desired angle. (Overall length is 115mm).

IF157 Half Mitre-Midi UT (#11.720) Used to join handrail to a stair post. (Overall length is 90mm).

IF158 UT Rail Bolt (#13.600) Used to join handrail to handrail on a level plain. (Overall length is 90mm).

IF160 Drilling Alignment Jig (#40.260) Assists in the correct alignment of drilling holes for Zipbolt installation.

IF162 UT Newel Fastener (#14.100) Used to fasten a stair post to the floor. (Overall length is 250mm).

IF163 Side Ratchet Tool (#40.310) This small handy tool is the most effective way of fastening all of the Zipbolts.

Installation Tip:Use a 5mm Hex bit with a cordless drill or side ratchet tool to securely join the parts via the unique internal gear mechanism that is found in each Zipbolt.

Zipb

olt

IF162

IF158IF156

IF157IF155

IF160

hammersmith.com.au

For detailed CAD drawings, please go to our website

IF154

IF163

8 Victorian Rail, Mono Rail & Prestige Rail

CODE DESCRIPTION OTHER INFORMATIONVictorian Rail

JH224 Left Scroll (aka Volute) Overall width is 270mm.

JH225 Right Scroll (aka Volute) Overall width is 270mm.

JH230 53º Ease Up Cut back to 37º for an ease up, or mitre one end and create a gooseneck.

JH235 Victorian Rail

Mono Rail

JH050 Mono Rail

JH062 End Scroll

Prestige Rail

JH170 Prestige Rail

Vic

Rail,

Mon

o Ra

il &

Pres

tige

Rail

45

65

45

55

45

70 JH235 JH230

JH224 JH225

JH050 JH062

VICT

ORIA

N R

AIL

MON

O RA

ILPR

ESTI

GE R

AIL

hammersmith.com.au


JH170

65

89

65

CODE DESCRIPTION OTHER INFORMATIONIF130 Drilling Alignment Jig IF131 Plastic ConnectorJH070 43 Ø Designer Rail (Timber)JH071 Radiused End CapJH072 Flat End CapJH073 Half Ball End CapJH074 90º Terminating BendJH075 90º Radiused BendJH077 Straight ConnectorJH078 Adjustable BendJH085 90º Bend (Timber)JH086 End Cap (Timber)

Desi

gner

Rai

l

The Designer Rail combines the warmth of timber with the modern look of stainless steel.

All the metal fittings are manufactured in a 316 grade stainless steel, which means they are suitable for both interior and exterior use.

The range of applications the Designer Rail could be used on, include; corridor handrailing in hotels, hospitals and aged care (it conforms to Australian Standard AS1428.1-2009 “Design for Access and Mobility”), balcony handrailing

for exterior balustrade and wall rail for domestic stairs.Apart from the unique look, the other great selling feature is the ease of

assembly. The key to this is the plastic connector (IF131) that along with the use of the drilling jig (IF130) allows the easy joining of the stainless steel fittings to the end of the 43mm round timber handrail. A small amount of

silicone on the joiner will help to create a strong hold.

Designer Rail 9

JH070

JH071 JH072 JH073

JH074 JH075

JH077 JH078 IF130

IF131

JH085

JH086

hammersmith.com.au

For available timbers and finishes, refer to the latest price list | For detailed CAD drawings, go to our website

43mm

10 EZIRAIL 50 - Full Round, Treads & Risers

CODE DESCRIPTION OVERALL SIZE OTHER INFORMATIONJH099 Ezirail 50 Ø 50 Ø Full round 50mm diameter (no flat base).

JH103 Ezirail 90º Bend (110 Internal Radius) Use this bend to cut smaller angled bends from.

JH104 Ezirail 90º Bend (55 Internal Radius) Internal radius is 55mm.

JH135 Ezirail End Cap 50 Ø 16mm fixing dowel. Use the drilling jigs (page 5) to fix to end of rail.

JT001 1000mm Tread 1000 x 285 x 33 Pine treads are 35mm thick. Vic Ash treads are 33mm thick.

JT002 1000mm Tread with Bullnose 1000 x 285 x 33 Pine treads are 35mm thick. Vic Ash treads are 33mm thick.

JT004 1200mm Tread 1200 x 285 x 33 Pine treads are 35mm thick. Vic Ash treads are 33mm thick.

JT005 1200mm Tread with Bullnose 1200 x 285 x 33 Pine treads are 35mm thick. Vic Ash treads are 33mm thick.

JT007 1200mm Tread (43mm Thick) 1200 x 285 x 43 Only available in Vic Ash.

JT010 1000mm Riser 1000 x 190 x 19 Available in Pine and Vic Ash.

JT011 1200mm Riser 1200 x 190 x 19 Available in Pine and Vic Ash.

JT017 Wedge 180 x 32 20mm to 5mm taper. Used to hold treads and risers in place.

EZIR

AIL

50, T

read

s &

Ris

ers

Tread

JT001JT004JT007

Riser

JT010JT011

Treadwith Bullnose

JT002JT005

JT017

hammersmith.com.au


JH103 JH104

JH135JH099

50mm

Metal Balusters 11

CODE DESCRIPTION OVERALL SIZE OTHER INFORMATIONJB300 16mm Square Plain 1090 x 16 sq

Balusters are hollow with a 1.5mm wall thickness, which means easy to cut, yet still strong enough not to bend.

All designs are Satin Black in colour with a smooth

powdercoated finish which is easy to clean.

The length of each baluster is 1090mm, which is suitable for the rake, level and cut-string of a staircase.

JB301 16mm Square Single Twist 1090 x 16 sqJB302 16mm Square Double Twist 1090 x 16 sqJB303 16mm Square Single Cage 1090 x 16 sqJB305 16mm Square Single Knuckle 1090 x 16 sqJB306 16mm Square Double Knuckle 1090 x 16 sqJB307 16mm Square “S” Scroll 1090 x 16 sq

JB400 16mm Round Plain 1090 x 16 ØJB401 16mm Round Single Knuckle 1090 x 16 ØJB402 16mm Round Double Knuckle 1090 x 16 ØJB403 16mm Round Single Cage 1090 x 16 ØJB407 16mm Round “S” Scroll 1090 x 16 Ø

Met

al B

alus

ters

— 1

6 M

M S

quar

e —

— 1

6 M

M R

ound

—

JB301 16mm Square JB303 16mm Square

JB305 16mm SquareJB403 16mm Round

JB300 JB301 JB302 JB303 JB305 JB306 JB307

JB400 JB401 JB402 JB403 JB407

hammersmith.com.au


12 Timber Balusters & Glass Mounted Handrail Brackets

CODE DESCRIPTION OVERALL SIZE OTHER INFORMATIONJB000 Plain Baluster 1000 x 42 sq

JB002 Tasman Baluster 1000 x 42 sq Length of top square is 100mm. Length of turning is 550mm.

JB008 3 Rings 2 Flutes Baluster 1000 x 42 sq Length of top square is 140mm. Length of turning is 560mm.

JB024 No.1 Baluster 1000 x 42 sq Length of top square is 130mm. Length of turning is 570mm.

JB081 Chamfered Baluster 1000 x 42 sq Length of top square is 130mm. Length of turning is 560mm.

JB135 Regent Pin Top Baluster 1000 x 42 sq Diameter of top pin is 25mm. Length of turning is 800mm.Tim

ber B

alus

ters

JB000 JB002 JB008 JB024 JB081 JB135

hammersmith.com.au

For available timbers and finishes, refer to the latest price list | For detailed CAD drawings, go to our website

Glas

s M

ount

ed

CODE DESCRIPTION A (mm) B (mm) C (mm) D (mm) OTHER INFORMATIONIF404 85mm Adjustable 85 30-80 50 25 Suits only 43 to 50mm round handrail designs

IF406 Flat Cradle for Adjustable 25 Flat cradle for IF404 and IF459 Handrail Brackets

IF409 80mm Square Bracket 80 50 42 18 Suits only 43 to 50mm round handrail designs

IF410 80mm Square Bracket 80 50 42 18 Suits only flat base handrail designs

IF452 85mm Glass Bracket 85 63 44 25 Suits only flat base handrail designs

IF455 85mm Glass Bracket 85 63 44 25 Suits only 43 to 50mm round handrail designs

IF452 IF455— G

lass

Mou

nted

—

IF404

IF406

IF409IF410

All of these brackets are manufactured from 316 stainless steel, and can be used for both exterior and interior use.

For available finishes, please refer to the latest price list | For detailed CAD drawings, please go to our website

Stainless Steel Handrail Brackets 13St

ainl

ess

Stee

l Han

drai

l Bra

cket

s

CODE DESCRIPTION A (mm) B (mm) C (mm) D (mm) OTHER INFORMATIONIF400 75mm Stainless Bracket 75 55 60 22 Suits only 43 to 50mm round handrail designs

IF401 75mm Stainless Bracket 75 55 60 25 Suits only flat base handrail designs

IF402 85mm Adjustable Bracket 85 40-80 22 25 Fixes to flat surfaces. Suits flat base handrails

IF403 85mm Adjustable Bracket 85 40-80 22 25 Fixes to 50Ø posts. Suits 43 to 50mm handrails

IF406 Flat Cradle - Adjustable - - - 25 Flat cradle for IF404 and IF459 handrail brackets

IF407 80mm Square Bracket 80 44 60 x 40 18 Suits only 43 to 50mm round handrail designs

IF408 80mm Square Bracket 80 44 60 x 40 18 Suits only flat base handrail designs

IF411 80mm Stainless Bracket 80 46 40 19 Suits both flat and round handrail designs

IF456 85mm Stainless Bracket 85 60 60 25 Suits only 43 to 50mm round handrail designs

IF457 85mm Stainless Bracket 85 60 60 25 Suits only flat base handrail designs

IF458 85mm Square Bracket 85 45 60 x 40 21 Suits both flat and round handrail designs

IF459 88mm Adjustable Bracket 88 30-70 66 25 Suits only 43 to 50mm round handrail designs

IF500XSS 75mm HD Bracket 75 60 65 20 Suits only flat base handrail designs

IF503 Concealed Handrail Fixing - - - - Use instead of top plate for IF456 / IF457 brackets

hammersmith.com.au

IF500XSS

IF456 IF457

IF411

IF400

IF458

IF503

IF407 IF408

IF403IF401

IF459

IF402

IF406

All of these brackets are manufactured from 316 stainless steel, and can be used for both exterior and interior use.

Hand

rail

Brac

kets

CODE DESCRIPTION A (mm) B (mm) C (mm) D (mm) OTHER INFORMATIONIF445 Upright Bracket 60 - 55 25 Suits all of our handrail designs

IF446 80mm Deluxe Bracket 80 40 55 25 Suits all of our handrail designs

IF448 60mm Standard Bracket 60 45 55 20 Suits only flat base handrail designs

IF449 80mm Standard Bracket 80 45 55 25 Suits all of our handrail designs

IF450 80mm Budget Bracket 80 50 50 20 Suits only flat base handrail designs

IF451 65mm Budget Bracket 65 50 50 20 Suits only flat base handrail designs

IF460 Upright Bracket 60 - 60 25 Suits only flat base handrail designs

IF461 Upright Bracket 60 - 60 25 Suits only 43 to 50mm round handrail designs

IF500XSC 75mm HD Bracket 75 60 65 20 Suits only flat base handrail designs

IF502 Curved Saddle for IF500 - - - 25 Suits only 43 to 50mm round handrail designs

JR002 Wall Bracket Rosette 20 x 68 Ø Works best with handrail brackets IF445, IF448 and IF449


IF451

IF500XSC

IF449 IF448

IF460 IF461

— In

terio

r Use

Onl

y —

— To

p M

ount

ed —

IF446

IF445 JR002

14 Interior and Top Mounted Handrail Brackets hammersmith.com.au

IF450

IF502

Please note that these brackets are NOT made from stainless steel and therefore are only suitable for interior use.

Bracket IF445 is NOT made from stainless steel, but IF460 and IF461 both are.The stainless steel brackets are suitable for both interior and exterior use.

Traditional Posts 15

CODE DESCRIPTION OVERALL SIZE OTHER INFORMATIONTasman Range (Refer to page 31 of the brochure to see where each type of post is used on a staircase)

JN002 Standard Post 1500 x 90 sq Length of top block is 200mm. Length of bottom block is 625mm.

JN004 3-Kite Winder Post with Pin 670 x 90 sq Length of top block is 200mm.

JN028 Standard Post with Pin 880 x 90 sq Length of top block is 200mm.

JN029 Mid-Landing Post with Pin 880 x 90 sq Length of top block is 400mm.

JN086 Top-Landing Post with Pin 880 x 90 sq Length of top block is 300mm.

3 Rings & 2 Flutes Range (Refer to page 31 of the brochure to see where each type of post is used on a staircase)

JN063 Standard Post 1500 x 90 sq Length of top block is 200mm. Length of bottom block is 625mm.

JN064 Standard Post with Pin 880 x 90 sq Length of top block is 200mm.

JN065 Mid-Landing Post with Pin 880 x 90 sq Length of top block is 400mm.

JN068 3-Kite Winder Post with Pin 670 x 90 sq Length of top block is 200mm.

JN077 Top-Landing Post with Pin 880 x 90 sq Length of top block is 300mm.

Trad

ition

al P

osts

JN063 JN064 JN077 JN065 JN068

JN002 JN028 JN086 JN029 JN004

hammersmith.com.au


16 Extension Posts & Post Tops

CODE DESCRIPTION OVERALL SIZE OTHER INFORMATIONJN000 Plain Post 1500 x 90 sq

JN025 Ball Top 115 x 85 Ø Diameter of pin is 38mm.

JN136 90mm Scalloped Top Post Cap For 90sq Post Drops over the top of a 90 x 90 post.



JN160 90mm Pyramid Top Post Cap For 90sq Post Drops over the top of a 90 x 90 post.

JN161 115mm Pyramid Top Post Cap For 115sq Post Drops over the top of a 115 x 115 post.

JX001 650mm Extension Post 650 x 90 sq Diameter of hole is 38mm.



Exte

nsio

n Po

sts

& P

ost T

ops

JN160JN161JN025

JX001 JX002JX003

JN136JN138JN210

JN000

hammersmith.com.au


Prestige Posts 17

CODE DESCRIPTION OVERALL SIZE OTHER INFORMATIONJN213 Plain 155sq Post 1500 x 155 sq All posts are made from finger jointed & laminated pine. The

recessed posts come recessed on 4 sides, ready for the large versions of either the flat or pyramid drop-in panels ( JN222 or

JN226 for 155sq posts & JN242 or JN246 for 115sq posts.) Depth of recess is 14mm. All posts are supplied with JM002 mould.

JN214 Recessed 155sq Post 1500 x 155 sq

JN230 Plain 115sq Post 1500 x 115 sq

JN234 Recessed 115sq Post 1500 x 115 sq

JN148 Skirt for 115sq Post 570 x 147 sq Skirts are supplied as four 16mm thick panels, ready to fit around the post. Special mitre-lock corners allow for easy assembly.JN228 Skirt for 155sq Post 570 x 187 sq

JM002 Post and Skirt Mould 25 x 15 Supplied with posts & skirts, but can be purchased seperately.

Post

s &

Ski

rts

JN148JN228

JM002

JN213JN230

JN214JN234

hammersmith.com.au


18 Prestige Posts JN224JN244

Drop

-In

Pane

ls

CODE DESCRIPTION OVERALL SIZE OTHER INFORMATION JN220 Small Flat Drop-In Panel for 155sq Post 115 x 115

Panels are supplied assembled ready to be dropped into a 14mm recess in the posts. The large panels are for a standard post on a staircase, whereas the small and medium panels are for a landing post.

They are designed so that the moulding on the edges will sit proud of the surface of the post, with the flat or pyramid panel sitting below the surface.

Overall size refers to the outside dimensions of the panel including the mould. If you wish to machine your own recess, make the width and height of the recess 10mm less than the overall size. For example, make the recess for JN246 to be 500 x 77 x 14mm.

JN221 Medium Flat Drop-In Panel for 155sq Post 332 x 115

JN222 Large Flat Drop-In Panel for 155sq Post 510 x 115

JN224 Small Pyramid Drop-In Panel for 155sq Post 115 x 115

JN225 Medium Pyramid Drop-In Panel for 155sq Post 332 x 115

JN226 Large Pyramid Drop-In Panel for 155sq Post 510 x 115

JN240 Small Flat Drop-In Panel for 115sq Post 87 x 87

JN241 Medium Flat Drop-In Panel for 115sq Post 332 x 87

JN242 Large Flat Drop-in Panel for 115sq Post 510 x 87

JN244 Small Pyramid Drop-In Panel for 115sq Post 87 x 87

JN245 Medium Pyramid Drop-In Panel for 115sq Post 332 x 87

JN246 Large Pyramid Drop-In Panel for 115sq Post 510 x 87

JN222JN242

JN226JN246

JN221JN241

JN225JN245

JN220JN240

JN224JN244

hammersmith.com.au


Stainless Wire Cable 19hammersmith.com.auSt

ainl

ess

Wire

Cab

le

DESCRIPTION CODE (1x19) CODE (7x7) CODE (7x19) AVAILABLE IN1.2mm Ø Wire Cable - SSW002 -

All sizes and configurations of cables are available in 305 metre reels.

The 3.2mm Ø 1x19 and 7x7 cables are also available in 100 metre reels and can also

be purchased by the metre. (This is NOT the case for any of the other sizes).

1.6mm Ø Wire Cable SSW003 SSW004 -

2.0mm Ø Wire Cable SSW005 SSW007 SSW006









14.0mm Ø Wire Cable SSW032 - SSW033

16.0mm Ø Wire Cable SSW034 - SSW035

For more detail, please go to our website

1 x 19316 grade stainless steel suitable for both interior and exterior application.Rigid, non flexible, minimum stretch.Higher breaking strain than compared to 7x7 or 7x19.Smooth surface with a bright finish.Ideal for use with hyrdaulically swaged fittings. (Page 20)

•

••

••

7 x 7316 grade stainless steel suitable for both interior and exterior application.Semi flexible, suitable for bending around thimbles.Braided surface with a bright finish.Ideal for use with hand swaged fittings. (Page 21)

•

•

••

7 x 19316 grade stainless steel suitable for both interior and exterior application.Very flexible, suitable for bending around tight curves.Braided surface with a bright finish.Ideal for use with hand swaged fittings. (Page 21)

•

•

••

Some great examples of the various uses for stainless wire cables ......


Stai

nles

s St

eel W

ire F

ittin

gs

CODE DESCRIPTION OTHER INFORMATION FITTINGS FOR USE WITH A HyDRAULIC SWAGER (IF120, SEE PAGE 22)

SSW049 Lag / Swage Bottle Screw

3.2mm 1x19 Stainless Wire Cable (SSW001, on page 19) is the best cable to use for these fittings; but 7x7 and 7x19 will still work.

For more information on which fittings work best with each other, please refer to the Wire Balustrade Systems section of our website.

SSW050 Fork / Swage Long Bottle Screw

SSW051 Fork / Swage Short Bottle Screw

SSW052 Lag / Swage Right-Hand Terminal

SSW053 Fork / Swage Terminal

SSW056 Thread M6 / Swage Right-Hand Terminal

SSW069 Lag / Swage Left-Hand Terminal

SSW070 Thread M6 / Swage Right-Hand Terminal

SSW071 Dome Head Swage Terminal

SSW072 Hex Head Tensioner M6

SSW100 Fork / Swage Long Bottle Screw 4.0mm 1x19 Stainless Wire Cable (SSW010, on page 19) is the best cable to use for these fittings; but 7x7 and 7x19 will still workSSW101 Fork / Swage Terminal

OTHER FITTINGS

SSW047 M6 Right-Hand Threaded Insert Used in conjunction with Thread M6/Swage R/H Terminal (SSW056)

SSW048 M6 Left-Hand Threaded Insert Used in conjunction with Thread M6/Swage L/H Terminal (SSW070)

SSW054 40mm Coach Screw Fixes into timber posts

SSW055 60mm Coach Screw Fixes into timber posts

SSW057 Eye Bolt M6 Used in conjunction with Rivet Nut M6 Right-Hand Thread (IF127)

SSW058 Saddle Fixes onto timber and metal posts

SSW062 Grommet (Grey) Insert into metal posts to stop wire cable from rubbing

SSW073 Flip Toggle Used in conjunction with the Swage Terminal (SSW065, see page 21)

IF127 Rivet Nut M6 Right-Hand Thread Use the Rivet Nut Inserter (IF124, see page 22) to fasten to posts with a wall thickness of up to 4.0mmIF138 Rivet Nut M6 Left-Hand Thread

SSW051SSW049

SSW054 SSW055 SSW057 SSW058

SSW071 SSW072

SSW100 - 4.0mmSSW050 - 3.2mm

SSW062 SSW073

SSW069 - LEFTSSW052 - RIGHT

IF138 - LEFTIF127 - RIGHT


SSW101 - 4.0mmSSW053 - 3.2mm


All of these fittings require the use of a HYDRAULIC SWAGER (IF120)

hammersmith.com.au20 Stainless Wire Fittings

hammersmith.com.au Stainless Wire Fittings 21


Stai

nles

s St

eel W

ire F

ittin

gs

CODE DESCRIPTION OTHER INFORMATION FITTINGS FOR USE WITH A HAND SWAGER (IF134, SEE PAGE 22)

SSW059 Fork / Fork Bottle Screw 3.2mm 7x7 Stainless Wire Cable (SSW020, on page 19) is the best cable to use for these fittings; but 7x19 will still work.

1x19 Cable will NOT work with these fittings.SSW060 Ferrule

SSW061 Thimble

FITTINGS FOR USE WITH A HEX SWAGER (IF135, SEE PAGE 22)

SSW063 M8 Threaded Insert

3.2mm 1x19 Stainless Wire Cable (SSW001, on page 19) is the best cable to use for these fittings; but 7x7 and 7x19 will still work.

For more information on which fittings work best with each other, please refer to the Wire Balustrade Systems section of our website.

SSW064 M8 Threaded Rivet Nut

SSW065 Swage Terminal

SSW066 M8 Tension Rod

SSW067 M8 Finishing Cap

SSW068 M8 Stop Bolt

FITTINGS FOR USE WITH THE QUICKLOC RELEASE KEy (SSW074)

SSW074 Quickloc Release Key3.2mm 7x7 Stainless Wire Cable (SSW020, on page 19) is the best

cable to use for these fittings; but 7x19 will still work.We do not recommend using a 1x19 cable due to slippage.

Inside the end of each of the fittings are jaws that will clamp onto the wire. Simply push the wire into the end of the fittings to enage

the jaws.

Once secured, the wire can only be released by using the Quickloc Release Key. Push the key into the end of the fitting to dis-engage

the jaws, then pull out the wire. The jaws can simply then be re-enaged by pushing the wire cable back in.

SSW075 Quickloc Fork Bottle Screw

SSW076 Quickloc M6 Thread Terminal

SSW077 Quickloc Lag Terminal

SSW078 Quickloc Fork Terminal

SSW079 Quickloc Lag Bottle Screw

SSW080 Quickloc Swivel Lag Bottle Screw

SSW081 Quickloc Swivel M6 Thread Bottle Screw

SSW082 Quickloc Swivel Lag Terminal

SSW083 Quickloc Swivel M6 Thread Terminal

SSW063 SSW064 SSW065 SSW066 SSW067 SSW068

SSW059 SSW060 SSW061

SSW075



SSW082 SSW083

These fittings require the use of a HAND SWAGER (IF134)

These fittings require the use of a HEX SWAGER (IF135)

These fittings require the use of the QUICKLOC RELEASE KEY (SSW074). The key, when inserted into the end of the fitting, will open the jaws, allowing for the 3.2mm wire to be removed.

SSW074

Wire

Cab

le D

Iy T

ools

CODE DESCRIPTION OTHER INFORMATION IF112 Right-Hand M6 Mandrel for Rivet Nut Inserter This mandrel is used to fasten the IF127 right-hand M6 rivet nut.

IF113 Left-Hand M6 Mandrel for Rivet Nut Inserter This mandrel is used to fasten the IF138 left-hand M6 rivet nut.

IF114 Screw Eye Drive Bit The quickest way to install the SSW054 and SSW055 coach screws.

IF115 Peek Stainless Steel Polish Keep your stainless steel tube and wire looking great with this polish.

IF120 Hydraulic Swager Used to crimp the ends of all the hydraulically swaged fittings.

IF122 Wire Cable Rope Cutter Cuts wire cable up to 4mm thick.

IF124 Rivet Nut Inserter Used to fix the IF127 and IF138 rivet nuts into stainless steel tube.

IF133 Spanner for Bottle Screw Used to quickly tension bottle screws and swage terminals.

IF134 Hand Swager with Built In Cutter Used to crimp the SSW060 ferrule. Also has cuttter for 3.2mm wire cable.

IF135 Hex Swager Used to crimp the SSW065 swage terminal.

IF136 Soft Jaw Pliers Used to tighten (without damaging) the SSW067 and SSW068 fittings.

For more details, please go to our website

IF114

IF122

IF133

IF134 IF120

IF112 - Right

IF115

IF124

IF136IF135

IF113 - Left

22 Wire Cable DIy Tools hammersmith.com.au

Stainless Steel Tube & Fittings - Square 23hammersmith.com.auSt

ainl

ess

Squa

re T

ube

& Fi

ttin

gs

CODE DESCRIPTION OTHER INFORMATION SST100 Square Stainless Steel Tube 50.8 x 50.8 1.5mm Wall Thickness. (3.0mm also available. Contact us for more info).

SSF100 Base Plate with 2 Holes

The majority of these fittings are available in both a mirror (polish) and satin (brushed) finish. (More information can be found on our website or

price list.)

Many of the fittings can be joined to the tube by using T-Rex glue(IF123, on page 26).

SSF101 Base Plate with 4 Holes

SSF102 Flat End Cap

SSF105 Weld-On Base Plate (Thick Cast)

SSF106 Cover Plate

SSF108 Base Plate (Internal Fit)

SSF109 Round Rail Support

SSF110 Flat Rail Support

SSF111 Round Rail Adjustable Support

SSF112 Flat Rail Adjustable Support

SSF113 Rail to Rail Joiner

SSF117 Rail Converter


SST100 SSF102

SSF109 SSF110 SSF111 SSF112

SSF117

SSF100

SSF101

SSF105SSF108

SSF106

SSF113

hammersmith.com.au 24 Stainless Steel Tube & Fittings - RoundSt

ainl

ess

Stee

l Rou

nd T

ube

& F

ittin

gs CODE (50.8Ø) CODE (38.1Ø) DESCRIPTION OTHER INFORMATION SST001 SST004 Round Stainless Steel Tube 1.6mm Wall Thickness. (3.0mm also available for 50.8Ø).

SSF001 SSF061 90º Acute Bend

The majority of these fittings are available in both a mirror (polish) and satin (brushed) finish. (More information can be

found on our website or price list.)

Many of the fittings can be joined to the tube by using T-Rex glue (IF123, on page 26).

SSF029 SSF060 90º Radiused Bend

SSF003 SSF063 Straight T

SSF002 SSF062 Adjustable Angle Bend

SSF035 SSF082 35º Bend

SSF026 SSF081 180º Bend

SSF004 SSF064 90º Corner T

SSF007 SSF066 Rail Converter (Weld-On Top)

SSF025 - Perpendicular Joiner

SSF033 - End Joiner

SSF020 SSF076 Round Rail Support

SSF021 SSF077 Flat Rail Support

SSF022 SSF078 Round Rail Adjustable Support

SSF023 SSF079 Flat Rail Adjustable Support


SST004 - 38.1 ØSST001 - 50.8 Ø

SSF061 - 38.1 ØSSF001 - 50.8 Ø

SSF060 - 38.1 ØSSF029 - 50.8 Ø

SSF082 - 38.1 ØSSF035 - 50.8 Ø

SSF062 - 38.1 ØSSF002 - 50.8 Ø

SSF063 - 38.1 ØSSF003 - 50.8 Ø

SSF064 - 38.1 ØSSF004 - 50.8 Ø

SSF066 - 38.1 ØSSF007 - 50.8 Ø

SSF025 - 50.8 Ø SSF033 - 50.8 Ø

SSF076 - 38.1 ØSSF020 - 50.8 Ø

SSF077 - 38.1 ØSSF021 - 50.8 Ø

SSF078 - 38.1 ØSSF022 - 50.8 Ø

SSF079 - 38.1 ØSSF023 - 50.8 Ø

SSF081 - 38.1 ØSSF026 - 50.8 Ø

Stainless Steel Tube & Fittings - Round 25hammersmith.com.au

SSF070 - 38.1 ØSSF009 - 50.8 Ø

SSF013 - 50.8 Ø

SSF032 - 50.8 Ø SSF068 - 38.1 Ø

SSF034 - 50.8 Ø

SSF071 - 38.1 ØSSF030 - 50.8 Ø

SSF072 - 38.1 ØSSF031 - 50.8 Ø

SSF069 - 38.1 ØSSF011 - 50.8 Ø

SSF037 - 50.8 Ø

SSF083 - 38.1 ØSSF036 - 50.8 Ø

SSF067 - 38.1 ØSSF010 - 50.8 ØSSF028 - 50.8 Ø

SSF074 - 38.1 ØSSF014 - 50.8 Ø

SSF065 - 38.1 ØSSF012 - 50.8 Ø

SSF073 - 38.1 ØSSF024 - 50.8 Ø

Stai

nles

s St

eel R

ound

Tub

e &

Fitt

ings CODE (50.8Ø) CODE (38.1Ø) DESCRIPTION OTHER INFORMATION

SSF009 SSF070 Radiused End Cap (Self Gripped)

The majority of these fittings are available in both a mir-ror (polish) and satin (brushed) finish. (More information

can be found on our website or price list.)

Many of the fittings can be joined to the tube by using T-Rex glue (IF123, on page 26).

The Internal Fit fittings, slide snuggly inside the tube.

SSF030 SSF071 Domed End Cap

SSF031 SSF072 Flat End Cap

SSF037 - 90º Terminating Bend

SSF028 - Weld-On Base Plate (Heavy Duty)

SSF011 SSF069 Domed Cover

SSF010 SSF067 Weld-On Base Plate (3.5mm Cast)

SSF036 SSF083 Round Base Plate

SSF013 SSF068 Base Plate (Internal Fit)

SSF012 SSF065 Oblong Base Plate

SSF024 SSF073 Rail To Rail Joiner

SSF034 - Side Mount Wall Bracket

SSF032 - Adjustable Base Plate (Internal Fit)

SSF014 SSF074 Handrail Wall Flange


26 Stainless Steel Tube & Fittings - RectangleSt

ainl

ess

Rect

angl

e Tu

be &

Fitt

ings DESCRIPTION CODE (50x25) CODE (50x10) OTHER INFORMATION

Rectangle Stainless Tube SST200 SST201 1.5mm Wall Thickness.

Base Plate (Internal Fit) SSF200 -Some of these fittings are available in both a mirror (polish) and

satin (brushed) finish. (More information can be found on our website or price list.)

The 50x25 fittings are designed to work with both solid and singe slotted 50x25 Rectangle tube. We only stock the solid tube

(SST200), but can get the single slotted tube if required.

Many of the fittings can be joined to the tube by using T-Rex glue (IF123).

Weld-On Base Plate & Cover SSF206 SSF236

90º Bend SSF202 SSF232

Swivel Joiner SSF208 SSF238

Adjustable Angle Bend SSF207 SSF237

End Cap SSF203 SSF233

Rail Converter (Weld-On Top) SSF201 SSF231

Wall Flange SSF204 SSF234

Rail to Rail Joiner SSF205 SSF235

CODE DESCRIPTIONIF118 Non Woven Web Pad To convert a mirror finish back to satin

IF123 T-Rex Glue Used to glue many of the stainless fittings to the matching tube

hammersmith.com.au


SSF200

IF123IF118

SST201 - 50x10SST200 - 50x25

SSF232 - 50x10SSF202 - 50x25

SSF236 - 50x10SSF206 - 50x25

SSF238 - 50x10SSF208 - 50x25

SSF237 - 50x10SSF207 - 50x25

SSF233 - 50x10SSF203 - 50x25

SSF234 - 50x10SSF204 - 50x25

SSF231 - 50x10SSF201 - 50x25

SSF235 - 50x10SSF205 - 50x25

Stainless Steel Tube & Fittings - Slotted 27hammersmith.com.auSt

ainl

ess

Stee

l Slo

tted

Tub

e &

Fitt

ings

CODE DESCRIPTION OTHER INFORMATION 50.8 Ø ROUND SLOTTED TUBE & FITTINGS

SST005 Single Slotted 50.8Ø Round Tube

1.6mm Wall Thickness.SST006 Double Slotted 50.8Ø Round Tube

SST007 90º Slotted 50.8Ø Round Tube

SST008 Infill for 50.8 Round

The tube has a 15mm wide slot that is designed to fit glass up to 12mm in thickness. If wanting to use 10mm glass, then we recommend using

the PVC Channel (SST010). This is not required for 12mm glass, where you can use silicone on top and on the sides of the glass to secure it in place.


SST010 PVC Channel

SSF001 90º Acute Bend

SSF090 Rail Converter

SSF092 End Cap (for Single & Double Slotted Tube)

SSF093 End Cap (for 90º Slotted Tube)


SSF095 Perpendicular Joiner

25 x 21 mm RECTANGLE SLOTTED TUBE & FITTINGS

SST203 Single Slotted 25 x 21 Rectangle Tube 1.5mm Wall Thickness.

SSF260 90º Bend The tube has a 14mm wide slot that is designed to fit glass up to 12mm in thickness. If wanting to use 10mm glass, then we recommend using

the PVC Channel (SST010). This is not required for 12mm glass, where you can use silicone on top and on the sides of the glass to secure it in place.


SSF261 End Cap

SSF262 Wall Flange


SSF264 Adjustable Angle Bend

SSF265 Swivel Joiner

SST005 SST006 SST007

SSF001 SSF090 SSF095 SSF094

SST203 SSF260 SSF265SSF264

SSF262 SSF263 SSF261

SST010 SST008

— 5

0.8

Ø Sl

otte

d —

— 2

5 x

21 m

m S

lotte

d —

SSF092SSF093


Stai

nles

s St

eel G

lass

Cla

mps

CODE DESCRIPTION OTHER INFORMATION IF124 Rivet Nut Inserter Used to fix the IF127 rivet nut into stainless steel tube.

IF127 Rivet Nut M6 Combining the IF127 rivet nut with the IF128 socket cap screw is the most secure method of fixing glass clamps to stainless steel tube.IF128 Socket Cap Screw for M6 Rivet Nut

SSG001 Glass Clamp Medium D - Flat Back For 10 or 12mm glass. Fits onto a flat surface.

SSG002 Glass Clamp Medium D - Curved Back For 10 or 12mm glass. Fits onto 50.8 Ø round tube.

SSG003 Glass Clamp Small Square - Flat Back For 8 or 10mm glass. Fits onto a flat surface.

SSG004 Glass Clamp Small Square - Curved Back For 8 or 10mm glass. Fits onto 50.8 Ø round tube.

SSG005 Glass Clamp Large Square - Flat Back For 10 or 12mm glass. Fits onto a flat surface.

SSG006 Glass Clamp Large Square - Curved Back For 10 or 12mm glass. Fits onto 50.8 Ø round tube.

SSG021 180º Glass to Glass Clamp Only works with 12mm glass. Easy solution to align a row of glass panels.

SSG022 Swivel Glass to Glass Clamp Only works with 12mm glass. Used to brace 2 glass panels on any angle.

SSG023 Glass to Wall Clamp Only works with 12mm glass. Used to secure a glass panel to a wall.

SSG001

SSG002

SSG003

SSG004

IF127 IF128

IF124

hammersmith.com.au


SSG005

SSG006

SSG021 SSG022

SSG023

28 Stainless Steel Glass Fittings - Clamps

Stainless Steel Glass Fittings - Standoffs & Spigots 29St

ainl

ess

Stee

l Gla

ss F

ittin

gs

CODE DESCRIPTION OTHER INFORMATION GLASS STANDOFFS

SSG100 50Ø Adjustable Glass Standoff (M12)

All standoffs are engineered to support glass panels up to 12mm in thickness, and come standard with a M12 threaded rod.

SSG101 50Ø Glass Standoff with 25mm Spacer (M12)




SSG157 Short Lag Screw for 25mm Spacer Standoffs The standard standoff comes with a length of M12 thread; but if you need to fix into timber, then use one of these lag screws instead.SSG158 Long Lag Screw for 50mm Spacer Standoffs

IF129 Spanner The quickest way to tighten 38Ø and 50Ø glass standoffs

GLASS SPIGOTS

SSS003 Round Glass Spigot - Core Drilled All spigots are manufactured from 2205 Stainless Steel, which is a higher grade than 316. They are designed to friction fit vertical glass (from underneath) up to 12mm thick. (ie. no hole in the glass is required).Core Drilled spigots are designed to be concreted into the ground.

Surface Mounted spigots come with a base plate for fixing to a flat plane.

SSS005 Round Glass Spigot - Surface Mounted

SSS006 Square Glass Spigot - Surface Mounted

SSS007 Square Glass Spigot - Core Drilled

SSS005SSS006 SSS003SSS007

hammersmith.com.au

SSG100

Adjustable from25mm to 42mm

SSG157

SSG158

IF129

SSG105 - 38 ØSSG101 - 50 Ø

SSG107 - 38 ØSSG103 - 50 Ø


30 Stainless Steel Ready-To-Use Posts hammersmith.com.auSt

ainl

ess

Stee

l Rea

dy-T

o-Us

e Po

sts

CODE DESCRIPTION AVAILABE IN SSP001 Plain Post (1.6mm) for Flat Balustrade 1.6mm Wall Thickness.

SSP011 Plain Post (3.0mm) for Flat Balustrade 3.0mm Wall Thickness.

SSP003 Intermediate Post for Flat Balustrade(1.6mm Wall Thickness)

11 holes spaced 80mm apart on opposite sides of the post (22 holes in total). This allows for wire cable to flow through the post.

SSP014 End Post for Flat Balustrade(3.0mm Wall Thickness)

11 rivet nuts (IF127, page 20) spaced 80mm apart on one side of the post. This is used as an end post on wire balustrade.

SSP015 Corner Post for Flat Balustrade(3.0mm Wall Thickness)

11 rivet nuts (IF127, page 20) spaced 80mm apart on adjacent sides of the post (22 rivet nuts in total). This is used as a corner post on wire balustrade.

SSP016 Round Saddle for Flat Balustrade PostsThese 4 saddles fix to top of flat balustrade posts; SSP001, SSP011,

SSP003, SSP014 & SSP015.The round saddle (SSP016) suits handrail between 43 and 50mm round.

The flat saddle (SSP017) suits handrail with a flat base of 38mm or wider.

SSP017 Flat Saddle for Flat Balustrade Posts

SSP018 Round Corner Saddle for Flat Balustrade Posts

SSP019 Flat Corner Saddle for Flat Balustrade Posts

SSP021 Plain Post (1.6mm) for Angled Balustrade 1.6mm Wall Thickness.

SSP031 Plain Post (3.0mm) for Angled Balustrade 3.0mm Wall Thickness.

SSP036 Round Saddle For Angled Balustrade Posts Fixes to top of angled posts; SSP021 & SSP031.

SSP037 Flat Saddle for Angled Balustrade Post Fixes to top of angled posts; SSP021 & SSP031.

SSP091 Intermediate Flat Bar Post for Flat Balustrade 11 drill holes spaced 80mm apart, for the wire to flow through the post.

SSP091

SSP019SSP018


SSP001SSP011

SSP003SSP014SSP015

SSP016SSP036

SSP017SSP037

SSP021SSP031

All posts are 50mm in diameter and 960mm in height (incl. the saddle).

All posts have a heavy duty base plate welded to the bottom of them. The base plate is 114mm in diameter and comes with 3 grub screws that allows for easily levelling of the post during installation. A domed cover is also supplied.

Post Knob

Level Handrail

Well Capping

StringBead

Level Baluster

Wall Stud

Floor Capping

Wood Turning

Top Landing

SpandrelLanding

Trim LandingJoists

Wall Lining

MidLanding

Tread

Riser

2-Kite Winder

3-KiteWinder

RakeBaluster

Stringer

Winder Post

RakeHandrail

StandardPost

Bullnose Step

The Anatomy of a Staircase 31hammersmith.com.au

TREATED TIMBER PRODUCTS

CODE DESCRIPTION OVERALL SIZE OTHER INFORMATIONAP001 2.7m Federation Square Post 2700 x 115 sq

All posts are manufactured in Finger Jointed Pine that has been H3 Treated for above ground application.

As well as this, designs AP021 and AP022 also have been primed painted.

Designs AP013, AP014 and AP020 are 3 metres in length. The extra 300mm is added to the length of the top square section.

AP002 2.7m Federation Round Post 2700 x 115 sq

AP003 2.7m Camden Post 2700 x 90 sq

AP004 2.7m Flagstaff Post 2700 x 90 sq

AP013 3.0m Federation Square Post 3000 x 115 sq

AP014 3.0m Federation Round Post 3000 x 115 sq

AP015 2.7m Square Turned Post 2700 x 115 sq

AP020 3.0m Square Turned Post 3000 x 115 sq

AP021 2.7m Chamfered Post 2700 x 90 sq

AP022 2.7m Chamfered & Fluted Post 2700 x 90 sq

What Does H3 Treated Mean ? H3 treated products are designed for outside, above ground application and provide a moderate level of protection against fungal decay and termites. The treatment is only on the surface, so if you need to cut the product, then the exposed timber needs to be re-treated. Refer to page 34 of this catalogue for timber preservative that can be used to do this.

Vera

ndah

Pos

ts

2.5 m

2.0 m

1.5 m

1.0 m

0.5 m

0.0 m

Verandah Posts 33

AP003 AP004 AP021 AP022AP015AP020

AP002AP014

AP001AP013

hammersmith.com.au

Products are H3 LOSP treated for above ground application | For detailed CAD drawings, please go to our website

CODE DESCRIPTION OVERALL SIZE OTHER INFORMATIONAM003 90mm Post Capital Mould For a 90sq Post Slips over a 90sq post at the time of installation.

AM006 115mm Post Capital Mould For a 115sq Post Slips over a 115sq post at the time of installation.

AM009 Post Capital Mould - 895mm Length 63 x 44 Mitre cut and fit around posts that are not close to 90 or 115sq

AP007 Tasman Newel Post 1320 x 90 sq

AP008 Tasman Half Newel Post 1320 x 90 x 42

AW001 115mm Federation Wall Plate 1345 x 115 x 56 For 115sq Verandah Posts - AP001, AP002, AP013 & AP014.

AW002 90mm Camden Wall Plate 890 x 90 x 42 For 90sq Verandah Posts - AP003 & AP004.

AW003 115mm Square Turned Wall Plate 1345 x 115 x 56 For 115sq Verandah Posts - AP015 & AP020.

IF116 Timber Treatment Wood Preservative 2 Litre Can Apply with a paint brush onto an un-treated surface.

IF117 Timber Treatment Wood Preservative 500ml Aerosol Spray onto an un-treated surface.Wal

l Pla

tes

& P

ost

Mou

lds

AP007 AP008 AW001 AW002 AW003

34 Wall Plates & Post Moulds

IF116 IF117

hammersmith.com.au


AM003AM006 AM009

CODE DESCRIPTION OVERALL SIZE OTHER INFORMATIONAG001 1000mm Roof Finial 1000 x 68 sq Length of square section is 400mm.

AG002 1200mm Roof Finial 1200 x 68 sq Length of square section is 600mm.



AG025 Morphett Roof Finial Top 450 x 85 Ø The pin on the bottom fits into the hole on the top of AG051.

AG032 Gooseneck Roof Finial No.1 390 x 225 x 64

AG033 Gooseneck Roof Finial No.2 350 x 420 x 50 It comes with a flanged metal base for fitting to a metal roof.


AG051 Morphett Roof Finial Bottom 1325 x 90 sq Length of square section is 1190mm.

AR001 80mm Rosette 80 Ø x 19



Roof

Fin

ials

& R

oset

tes

AG032

AG001

AG002

AG003

AG034

AG020

AR004

AR002

AR001

Roof Finials & Rosettes 35

AG051

AG025

hammersmith.com.au


AG033

CODE DESCRIPTION OVERALL SIZE OTHER INFORMATIONAB001 No. 1 Bracket 360 x 360 x 32

AB004 No. 4 Bracket 400 x 400 x 32

AB005 No. 5 Bracket 345 x 345 x 32

AB009 No. 9 Bracket 300 x 300 x 32

AB013 No. 13 Bracket 250 x 250 x 32

AB014 No. 14 Bracket 240 x 240 x 32

AB016 No. 16 Bracket 255 x 180 x 32

AB020 No. 20 Bracket 415 x 240 x 32

AB021 No. 21 Bracket 450 x 260 x 32

AB032 Eave Bracket #1 (with Finial) 190 x 270 x 42

AB033 Eave Bracket #2 190 x 270 x 42Vera

ndah

& E

ave

Brac

kets

AB001 AB004 AB005

AB016

AB014AB009

AB020

AB013

AB021

AB032 AB033

36 Verandah & Eave Brackets hammersmith.com.au


CODE DESCRIPTION OVERALL SIZE OTHER INFORMATIONAA001 Tasman Baluster 1000 x 42 sq Length of turning is 550mm.

AA002 90mm Plain Baluster Panel 930 x 90 x 19

AA004 Gumnut Baluster Panel 930 x 90 x 19

AA006 Tulip Baluster Panel 930 x 90 x 19

AA015 Chamfered Baluster 1000 x 42 sq Length of chamfer is 550mm.

AA022 66mm Plain Baluster 930 x 66 x 19

AS001 Frieze Spindle No. 1 150 x 32 Ø Pin Diameter is 13mm.

AS002 Frieze Spindle No. 2 150 x 32 Ø Pin Diameter is 13mm.

AS025 Tasman Frieze Spindle 200 x 42 sq Length of turning is 115mm.

AS030 Gumnut Frieze Panel 230 x 90 x 19

AS032 Tulip Frieze Panel 230 x 90 x 19

Balu

ster

s &

Spi

ndle

s

AA002 AA004 AA006 AA022 AA001 AA015

AS030 AS032 AS025 AS001 AS002

Balusters & Spindles 37 hammersmith.com.au


CODE DESCRIPTION OVERALL SIZE OTHER INFORMATIONAH001 Federation Window Canopy Side 740mm Reach Please note that when ordering this product, a quantity of 1

means 1 canopy side, not 1 pair of canopies. AH002 Bungalow Window Canopy Side 815mm Reach

JH160 135mm Exterior Handrail 135 x 38 Timber is Merbau (aka Kwila), which is suitable for exterior use.

JH165 Handrail (Primed and H3 Treated) 88 x 42 Large rebate 42mm, Medium rebate 32mm, Small rebate 19mm

JH166 Base Rail (Primed and H3 Treated) 66 x 42 Rebated only on one side, so to allow water to run off.

Do Treated Products Need To Be Painted ? Absolutely YES, is the simple answer. The reason is that the treatment used is only a H3 level surface treatment, which means that if the timber cracks (which it will after being exposed to the outside elements), then these cracks will allow water to penetrate deeper into the timber at a level below where the surface treament finishes. Once this happens, the timber will begin to decay and rot from the inside to out. It is therefore very important that a suitable exterior quality paint is applied to the product as soon as possible, and then reapplied regularly if any cracking in the timber is noticed. Speak to your local paint supplier for more information on which paints would be best suited to your environment.

Hand

rail

& W

indo

w C

anop

ies

AH001 AH002

38 Handrail & Window Canopies hammersmith.com.au


JH160 JH166JH165

CODE DESCRIPTION OVERALL SIZE OTHER INFORMATIONAC001 93 Ø Windsor Capital 185 x 93 Ø

AC002 93 Ø Ball Capital 140 x 93 Ø

AC003 93 Ø Acorn Capital 155 x 93 Ø


AC013 65 Ø Windsor Capital 130 x 65 Ø


AC028 85sq Square Windsor Capital 115 x 85 sq

AC034 85 Ø Saxon Post Capital 148 x 85 Ø

AC035 85 Ø Windsor Post Capital 156 x 85 Ø

AC029 90mm Pyramid Post Capital Fits a 90 sq Post

These 8 capitals are rebated underneath so as to drop over the various post sizes that they fit.

We suggest that they be fixed by using a suitable exteriorglue, such as Titebond PROvantage (GL131)

that we also sell.








IF034 Double Ended Galvanised Screw 100 x 8 Ø Used to fix a capital to a post (except for pyramid post capitals)

Fenc

e Po

st C

apit

als

AC001 AC002 AC003

IF034AC013

AC005 AC021

AC028 AC034 AC035


Available in 8different sizes.

AC029AC031AC032AC033

AC038AC039AC042AC043

Fence Post Capitals 39 hammersmith.com.au

CORBELS and FURNITURE COMPONENTS

CODE DESCRIPTION OVERALL SIZE OTHER INFORMATIONHC032 S1 Square 70 x 70 x 19

HC034 STR1 Square 70 x 70 x 19

HC036 RTR1 Round 65 Ø x 12

JA001 Step Architrave Block 95 x 95 x 30

JA002 Pyramid Architrave Block 95 x 95 x 35

JA003 Round Architrave Block 95 x 95 x 22

JA005 Quatrefoil Architrave Block 95 x 95 x 22

FC083 90mm Turned Column 900 x 90 sq

Length of top and bottom square is 170mm. Length of turning is 560mm.

FC084 68mm Turned Column 900 x 68 sq

FC085 90mm Fluted Column 900 x 90 sq

FC086 68mm Fluted Column 900 x 68 sq

Arch

itrav

e Bl

ocks

& C

olum

ns

JA003JA001 JA005

HC032 HC034 HC036

JA002

FC083 FC084 FC085 FC086


Architrave Blocks & Columns 41 hammersmith.com.au

CODE DESCRIPTION OVERALL SIZE OTHER INFORMATIONHC002 C2 Corbel 120 x 42 x 19

All corbels are hand carved, so slight variations are to be expected.

The dimensions shown are in millimetres, the first number is the overall height,

the second number is the maximum width,and the last number is the maximum depth (thickness).

HC006 C6 Corbel 170 x 60 x 40

HC008 C8 Corbel 205 x 70 x 65

HC011 # 3L Corbel 385 x 140 x 115

HC013 C13 Corbel 300 x 90 x 85

HC022 C22 Corbel 230 x 70 x 70

HC028 C28 Corbel 140 x 60 x 55

HC030 # 3 Corbel 340 x 90 x 90

HC033 # 33 Corbel 225 x 70 x 65

HC040 # 4 Corbel 345 x 90 x 70

HC060 # 6 Corbel 350 x 90 x 80

HC066 # 66 Corbel 300 x 70 x 70

Corb

els

HC002 HC006 HC028 HC008

HC013 HC022 HC040 HC033

HC030 HC011 HC066 HC060


42 Corbels & Carvings hammersmith.com.au

CODE DESCRIPTION OVERALL SIZE OTHER INFORMATIONHC010 # 10 Corbel 385 x 120 x 100

HC012 # 5L Corbel 365 x 175 x 115

HC027 C27 Corbel 115 x 42 x 19

HC031 T2 Corner 115 x 110 x 19These 3 items are supplied as a left and right pair,but the overall size dimensions are for 1 side only.HC050 L1 Leaf 60 x 150 x 12

HC051 L2 Leaf 70 x 220 x 12

HC053 SL1 Corbel 78 x 60 x 12

HC054 SC2 Centre 170 x 140 x 19

HC070 Fluted 70 170 x 70 x 50

HC071 Fluted 90 220 x 90 x 65

HC072 Fluted 130 320 x 130 x 95

Corb

els

HC027 HC054HC031 HC053

HC010 HC012

HC050

HC051

HC070 HC071 HC072


Corbels & Carvings 43 hammersmith.com.au

CODE DESCRIPTION OVERALL HEIGHT OTHER INFORMATIONFA006 Cabriole Leg 114mm (4½”) Only available in Pine.

FA007 Cabriole Leg 152mm (6”) Available in both Pine and Vic Ash.

FA008 Cabriole Leg 228mm (9”) Available in both Pine and Vic Ash.

FA009 Cabriole Leg 304mm (12”) Only available in Pine.





FA087 French Provincial Hall Table Leg 710mm Only available in Pine.

FA088 French Provincial Dining Table Leg 730mm Only available in Pine.

FA089 French Provincial Chair Leg 455mm Only available in Vic Ash.

Cabr

iole

Leg

s

FA010

FA011

FA013

FA073

FA006

FA007

FA008 FA009 FA088FA087FA089


44 Cabriole Legs hammersmith.com.au

CODE DESCRIPTION OVERALL SIZE OTHER INFORMATIONFL873 250mm Slim-Line Tapered Leg 250 x 43Ø

Slim-Line Tapered Legs are turned round and taper from 43Ø to 24Ø.

A 5/16” lag screw protrudes from the top.

Available in Pine and Vic Ash

FL883 750mm Slim-Line Tapered Leg 750 x 43Ø






FL912 100mm Regular-Line Tapered Leg 100 x 55Ø

Regular-Line Tapered Legs are turned round and taper from 55Ø to 36Ø.

A 5/16” lag screw protrudes from the top.

Available in Pine and Vic Ash







IF148 T-Nut Suitable for 5/16” Lag Screw

IF149 Vertical Leg Plate Suitable for 5/16” Lag Screw

IF150 Angled Leg Plate Suitable for 5/16” Lag Screw

IF151 Insert Nut 13mm Suitable for 5/16” Lag Screw

IF152 Adjustable Swivel Glide 25mm Suitable for 5/16” Lag Screw

IF153 Castor Available in Solid Brass and Chrome Plated

Roun

d Ta

pere

d Le

gs


IF148

IF149IF150

IF151 IF153IF152

7 different heights to select from;

100, 150, 250, 350, 450, 600 & 750mm.

Available in 43 Ø & 55 Ø

Round Tapered Legs & Accessories 45 hammersmith.com.au

FL892 - 43ØFL912 - 55Ø

FL893 - 43ØFL913 - 55Ø

FL873 - 43ØFL914 - 55Ø

FL894 - 43ØFL915 - 55Ø

FL895 - 43ØFL916 - 55Ø

FL896 - 43ØFL917 - 55Ø

FL883 - 43ØFL918 - 55Ø

46 Lounge & Chest Legs

CODE DESCRIPTION OVERALL SIZE OTHER INFORMATIONFL026 Turned Chest Leg 145 x 85 Ø Height Excludes Pin (30mm Diameter)

FL032 Turned Chest Leg 90 x 65 Ø Includes 5/16” Lag Screw

FL043 Turned Oxford Bun Foot 45 x 85 Ø Includes Drill Holes For Easy Fixing

FL375 Square Tapered Leg 140 x 65 x 65 Tapered on all 4 sides. Includes 5/16” Lag Screw

FL385 Turned Chelsea Chest Leg 103 x 79 Ø Includes 5/16” Lag Screw

FL386 Square Tapered Leg 103 x 85 x 85 Tapered on all 4 sides. Includes 5/16” Lag Screw

FL387 Round Tapered Leg 103 x 85 Ø Includes 5/16” Lag Screw

FL492 Round Tapered Leg 140 x 65 Ø Includes 5/16” Lag Screw

FL532 Square Knox Leg 75 x 125 x 125 Tapered on all 4 sides. Includes Drill Holes For Easy Fixing

FL611 Square Chervon Leg 45 x 85 x 85 Tapered on all 4 sides. Includes Drill Holes For Easy Fixing

FL612 Turned Light Bun Foot 61 x 108 Ø Includes Drill Holes For Easy Fixing

FL622 Square Penang Leg 45 x 130 x 130 Tapered on all 4 sides. Includes Drill Holes For Easy Fixing

FL805 Square Stanford Leg 200 x 54 x 54 Tapered on 2 adjacent sides. Includes 5/16” Lag Screw

FL864 Square Cube Leg 200 x 54 x 54 Tapered on all 4 sides. Includes 5/16” Lag Screw

FL877 Turned Gascoyne Bun Foot 70 x 85 Ø Includes Drill Holes For Easy Fixing

Loun

ge &

Che

st L

egs

FL026 FL032 FL385

FL043

FL612

FL611

FL386FL375

FL532FL622

FL387

hammersmith.com.au


FL492 FL864 FL805

FL877

Table Legs 47

CODE DESCRIPTION OVERALL SIZE OTHER INFORMATIONFL016 90mm Turned Coffee Table Leg 450 x 90 sq Length of Square Top is 150mm

FL017 68mm Turned Coffee Table Leg 450 x 68 sq Length of Square Top is 150mm

FL021 90mm Turned Dining Table Leg 735 x 90 sq Length of Square Top is 195mm

FL067 57mm Turned Wash-Stand Leg 800 x 57 sq Length of Square Top is 300mm

FL068 57mm Turned Wash-Stand Leg 800 x 57 sq Length of Square Top is 160mm

FL088 57mm Turned Coffee Table/Chair Leg 440 x 57 sq Length of Square Top is 75mm



FL573 68mm Richmond Coffee Table Leg 450 x 68 sq Length of Square Top is 120mm

FL615 90mm Richmond Dining Table Leg 735 x 90 sq Length of Square Top is 180mm

Tabl

e le

gs

FL615

FL573FL088FL017FL016

FL021 FL421 FL068FL526 FL067

hammersmith.com.au


48 Plugs, Knobs, Finials, Spindles & Curtain Rings

CODE DESCRIPTION OVERALL SIZE OTHER INFORMATIONDA071 Curtain Ring 97 Ø 65mm Internal Diameter

DA072 Curtain Ring 107 Ø 75mm Internal Diameter

DA094 Curtain Ring 76 Ø 50mm Internal Diameter

DH041 Honey Dipper 124 x 20 Ø Manufactured from Australian Leatherwood

FB001 9.5mm (3/8”) Cover Plug (Button) Fits into a 9.5mm (3/8”) hole. Head Protrudes 3mm.

FB002 12.7mm (1/2”) Cover Plug (Button) Fits into a 12.7mm (1/2”) hole. Head Protrudes 4.5mm.

FB006 25.4mm (1”) Cover Plug (Button) Fits into a 25.4mm (1”) hole. Head Protrudes 6mm.

FF014 24 Ø Finial 40 x 24 Ø Height of 40mm excludes the pin (10mm Ø).



FK013 30 Ø Knob 33 x 30 Ø Height of 33mm excludes the pin (12.7mm Ø).

FK027 19 Ø Knob 20 x 19 Ø Height of 20mm excludes the pin (10mm Ø).

FK043 40 Ø Knob 33 x 40 Ø Comes with a threaded metal insert in the base of the knob.

FS016 21 Ø Spindle 51 x 21 Ø Height of 51mm excludes the pins (10mm Ø).

FS019 18 Ø Spindle 38 x 18 Ø Height of 38mm excludes the pins (8mm Ø).

JS001 26 Ø Spindle 110 x 26 Ø Diameter of each end is 12.7mm.Plug

s, Kn

obs,

Finia

ls, S

pind

les &

Cur

tain

Rin

gs

FK027

FK013

FB001 FB002

FF014

FB006

FF015 FF016

FK043 FS016 FS019

hammersmith.com.au


DA071DA072DA094

JS001

DH041

TITEBOND WOOD GLUES and ADHESIVES

CODE SIZE SupremeGL031 19lt

Drum

CODE SIZE Ultimate 3GL021 473ml

Bottle

GL022 946mlBottle

GL023 3.78ltBottle

GL024 19ltDrum

CODE SIZE Premium 2GL011 473ml

Bottle

GL012 946mlBottle

GL013 3.78ltBottle

CODE SIZE OriginalGL001 473ml

Bottle

GL002 946mlBottle

GL003 3.78ltBottle

GL004 19ltDrum

Titebond Original is recognized as the industry standard for general woodworkng applications, this original aliphatic resin glue has been the preferred choice of professionals for over 50 years.It provides strong initial tack and fast speed of set to reduce clamp time; resulting in a bond stronger than the wood itself. It offers outstanding sandability, is unaffected by finishes; and provides excellent resistance to heat, solvents and mildew.It is ideal for both hardwoods and softwoods, as well as most other porous materials.Titebond Original Wood Glue is easy to use, non-toxic, solvent free and cleans up with water.

50 Titebond Wood Glues & Adhesives

Titebond Premium 2 is the first leading brand, cross linking PVA wood glue to pass the ANSI/HPVA Type II water-resistance specification.It is ideal for exterior woodworking projects, including outdoor furniture, birdhouses, planters, mailboxes and picnic tables.It offers strong initial tack, outstanding bond strength, fast speed of set and excellent sandability. It is FDA approved for indirect food contact (cutting boards) and is ideal for radio-frequency (R-F) gluing systems. It is also easy to use, non-toxic, solvent free and cleans up with water.

Titebond Ultimate 3 is an advanced, proprietary polymer glue that offers the best possible performance in woodworking adhesives. This waterproof formula passes the ANSI/HPVA Type I water-resistance specification and offers superior bond strength, longer open assembly time and lower application temperature.It is non-toxic, solvent free and cleans up with water, and is safer to use than traditional waterproof wood glues.It provides strong initial tack, sands easily without softening and is FDA approved for indirect food contact (cutting boards).It is the ultimate in wood glues; and is ideal for both interior and exterior applications.

Titebond Supreme is a aliphatic resin glue specifically formulated to provide a short clamp time for pine, oak and other ring-porous woods.It has excellent heat and solvent resistance and excellent durability for interior exposures.Similar to Titebond Original; but with a couple of key differences. It can be used in lower temperatures (5 degress celcius compared to 10 for the Original). It also has a slightly longer set-off time than compared to Original, which allows for a longer assembly time before needing to clamp.

hammersmith.com.au

Please go to our website to download more detailed Product Specs as well as Material Safety Data Sheets

CODE SIZE ProvantageGL131 296ml

Tube

CODE SIZE MelamineGL111 473ml

Bottle

CODE SIZE PolyurethaneGL101 355ml

Bottle

Titebond Wood Glues & Adhesives 51

Titebond Polyurethane is a professional-strength, waterproof formula specifically designed for a wide-range of applications.In addition to its superior wood-to-wood performance, it is also ideal for metal, ceramic, most plastics, HPL, Corian, stone and other porous/non-porous materials.It is the only polyurethane glue to combine a long 20 minute working time with a short 45 minute clamp time. It offers excellent sandability and is unaffected by finishes. As moisture causes the glue to foam, it has the ability to fill gaps and bridge irregularities in the substrates; however, it will not expand or contract in the joint once fully cured.It works well on exotic or “oily” woods, in particular “hard to glue” Australian hardwoods such as Spotted Gum, Sydney Blue Gum, Blackbutt, Brush Box, Iron Bark and Jarrah; and will not become brittle with age.

Titebond Melamine Glue is designed for bonding wood, particleboard, MDF and other porous substrates to synthetic materials such as melamine, vinyl and HPL as well as metals.It offers a fast initial tack, yet has a longer open time that allows for the accurate alignment of working materials. It is a water-based adhesive that is nonflammable, has low odor, dries clear and cleans up with water. Its thicker formulation offers fewer runs and drips, making it easier to use and more effective for precise assemblies.

Titebond Instant Bond Thick is an ethyl-cyanoacrylate-based wood adhesive, complete with an adhesive activator that accelerates the bonding process for almost “instant” adhesion.It is a two-part bonding system that allows 10 seconds for assembly and another 8 seconds to cure. It provides a strong, permanent bond and is ideal for hard to reach joints or surface areas that are difficult to clamp. It is ideal for bonding end-grain in a mitre joint application, quick assembly of jigs and fixtures, adhering turning blocks to scrap blocks on a faceplate for immediate use.Designed primarily for wood and wood products, this adhesive is also very effective on a wide variety of materials and substrates.

Titebond Wood Filler is ideal for the repair of cracks, holes, chips and other defects in any type of wood surface.It hardens like wood and effectively holds nails, screws and tacks. The repaired area can also be cut, sawed, planed, drilled and sanded easily.It dries to a neutral color, and can be painted, stained or finished. The latex-based formula is nonflammable, easy to apply and cleans up with water. It also resists shrinking and cracking, a common problem with lower quality filler products.

Titebond PROvantage Heavy Duty Construction Adhesive is a premium-grade, waterproof adhesive designed for more demanding projects and heavier materials.It is ideal for wood, metal, concrete, ceramic, masonry and most other common building materials. It offers excellent bond strength and can be extruded in severe weather conditions, hot or cold.

CODE SIZE Instant BondGL121 60ml

Bottle

CODE SIZE Wood FillerGL141 473ml

Tub

hammersmith.com.au

Please go to our website to download more detailed Product Specs as well as Material Safety Data Sheets

About Hammersmith ...Hammersmith Woodturners Pty. Ltd. opened for business back in 1946 when E.J.(Ted) Groth, a toolmaker by trade, started a small hand wood turning business in his back yard, manufacturing wooden souvenirs and turnings for the furniture trade.

In the early years the growth of the business was helped greatly by the 1956 Melbourne Olympics, and the use of wooden legs on the bottom of television sets.

The company purchased their first automated wood turning lathe in 1962, and have now expanded their collection to well over 20.

Drawing on his experience as a toolmaker, and having a fully equipped tool room, Ted was not only able to maintain and repair all specialised wood turning equipment, but also build machines to do special processes in cutting down on costly hand finishing.

In 1966 his son, Geoff, joined the business. Up until his retirement in early 2012, Geoff spent his 45 plus years with the business in both production and managing roles. It was Geoff’s early sales efforts “on the road” that helped the company expand into the many different areas that it is involved in today, including the building, staircase, and furniture industries throughout all parts of Australia.

Then in 1993 Geoff’s son, Wyatt, became the third generation to work in this successful family business. Although having now taken over the role of Managing Director from his father; his early involvement in the company was in customer relations, including the setting up of office and factory systems to ensure the customer’s demands could be met both quickly and accurately.

In 2010 Wyatt’s wife, Michelle, joined the company as a receptionist as well as sales and marketing, concentrating mainly on website and brochure development.

In recent years the decline in popularity of wood turnings has resulted in even more changes to the types of products manufactured; and now with 70 years of business behind them, they are a 100% freehold company that employs around 15 people; and whilst their past doesn’t guarantee a future it certainly goes a long way to doing so.

HAMMERSMITH WOODTURNERS PTy LTD49 Hocking Street Brompton South Australia 5007 | P.O. Box 27 Hindmarsh South Australia 5007

P [08] 8346 8211 | F [08] 8346 0135 | E [email protected] | W hammersmith.com.au

CURRENT AS OF JULY 2016 (REPLACES 2013/14 CATALOGUE)

A.C.N 007 670 528 | A.B.N 14 007 670 528

Our Website ...Have you had a look at our website lately? If not, you might be surprised by what you find!

- All of the products in this catalogue, as well as a few extra, are available for purchase online.

- Larger photographs and detailed dimensioned CAD drawings can be viewed for all products.

- The most current pricing for all products.

- Up-to-date stock levels.

- Current news stories about custom jobs that we have done or new products that we have just released.

hammersmith.com.au

PRODUCT CATALOGUE 2016 - 2018 - Hammersmith · 2019-03-21 · Custom Manufacturing : We do have the...

Documents

Transcript of PRODUCT CATALOGUE 2016 - 2018 - Hammersmith · 2019-03-21 · Custom Manufacturing : We do have the...