Product Catalog -...

www.flowerortho.com

Product Catalog

Reduce OR Turnover Time• Complete several back-to-back cases

from one FlowerCube

Complete Cases Faster• Single-use instruments are always

sharp, pristine and specificallydesigned to reduce surgical steps

Decrease Infection Risk• Individually packaged instruments are

always sterile, reducing infection potential

Eliminate Set Processing• The Ready-for-Surgery platform completely

eliminates pre-op sterilization and post-opdecontamination

We Build a More Efficient Case

2

The FlowerCube™

Flower Orthopedics is the leader in Ready-for-Surgery™ bone fixation. We deliver efficienciesthroughout the supply chain that reduce the overall cost of care.

Designed for specific surgical indications, the FlowerCube™ contains all of the implants andinstruments required for the case. All products are sterile packaged, single-use and alwaysReady-for-Surgery.

Flower Orthopedics Corporation T: 877.778.8587 F: 215.394.8904100 Witmer Road, Suite 280, Horsham, PA 19044 www.flowerortho.com

3

Contents

• The FlowerCube™......................................................................................4Concept.........................................................................................4Anatomy........................................................................................5

• Flower Implant Portfolio .............................................................................6

• Ready-for-Surgery™ Instrumentation ........................................................ 7Instrument Kits................................................................................ 7E-Kit™ Advanced ............................................................................9Drill Bit Kits.................................................................................. 11Ancillary Instruments..................................................................... 12

• Upper Extremity FlowerCubes™...............................................................13Hand...........................................................................................13Distal Radius ................................................................................15Proximal Humerus .........................................................................16

• Lower Extremity FlowerCubes™ ...............................................................17Forefoot .......................................................................................17Midfoot........................................................................................19

• FlowerGraft™ FlowerCube™ ...................................................................22

• Lower Extremity FlowerCubes™ (continued)Fibula ..........................................................................................23Tibia............................................................................................25

• Headless & Cannulated Screw FlowerCubes™..........................................27Small ...........................................................................................27Medium .......................................................................................28Large...........................................................................................29

• General Use Plates...................................................................................30Reconstruction ..............................................................................30Osteosynthesis..............................................................................32

• FlowerCart™ ...........................................................................................33

• Flower Biologics.......................................................................................34

• Product List ..............................................................................................35


4

FlowerCube™ Concept

Flower Orthopedics is the innovator of the FlowerCube™, a complete indication-based bone fixation platform.Designed for specific surgical procedures the FlowerCube contains all of the implants and instruments requiredfor the case. All products are sterile packaged, single-use and always Ready-for-Surgery™ eliminating pre-operative, on-site sterilization and post-op cleaning and decontamination.

Flower Orthopedics offers a variety of indication and procedure based FlowerCube configurations for upper andlower extremity applications. In addition to the standard configurations FlowerCubes are fully customizable.

The FlowerCube™ and FlowerCarriage™

FlowerCube™The FlowerCubes are delivered insecure hard plastic shippingcontainers, providing protection forthe FlowerCarriage™ inside. The outer container is ideal fortransporting the FlowerCarriagebetween facilities.

FlowerCarriage™The FlowerCarriage contains the implantsand instruments required for a specificsurgery. The FlowerCarriage, made outof sturdy medical grade laminate can beeasily carried in and out of the OR.


5

Anatomy of the FlowerCube™

Flower Instrument KitsFlower Instrument Kits include allinstruments required for platepositioning and screw placement.Depending on the application, every kit contains a screw driver(cannulated or solid), preliminaryfixation devices (olive wires or K-wires) and a depth gauge (platingand/or cannulated). Each InstrumentKit is sterile, single-use and designedto reduce surgical steps.

Flower TrialsSterile packaged trials can be used topinpoint the exact implant size as well asfunction as a bending template. Prior toopening the sterile packaged implant.

FlowerCarriage™Contains the implants andinstruments required for aspecific surgery. TheFlowerCarriage, made out of sturdy medical gradelaminate can be easily carried in and out of the OR.

Flower Plating andCannulated ScrewsFlower Plating and CannulatedScrews are individually packagedand clearly marked by diameterand length. Each type of screw (cannulated, locking, non-lockingcompression, headless compression)is color coded for simplifiedhandling and easy recognition.Each package includes QR andbar codes for lot traceability.

Flower PlatesEach sterile-packaged, titaniumplate is designed for a particularindication. Plates are visible in the package and each packageincludes a QR and a barcode forlot traceability.

Drill Bit KitsDrill Bit Kits and Lag ScrewKits are packaged with theappropriate drill guides.Cannulated and solid drill bitsfor all applicable screwdiameters are included in theFlowerCube. Drill Bits arealways new, sharp andpristine.

Ancillary InstrumentsAncillary instruments includingadditional K-wires, platebenders and cup & conereamer sets for MTP fusionsare included in theFlowerCube™.


6

Flower Implant Portfolio

The Flower Implant Portfolio was developed for the Ready-for-Surgery™ FlowerCube™,and as such utilizes a platform-based technology. Each implant works as a member of adistinct platform, allowing for the standardization of instruments and implants within eachplatform as well as across the implant portfolio.

Plating PortfolioThe Plating Portfolio has two platforms differentiated by the range of screw diameters that work with each of thetwo locking mechanisms (FlowerGrooves™), Small and Medium. All screws within each platform have the samehead size and therefore utilize the same screw driver and depth gauge instruments.

The FlowerGroove accepts both locking and non-locking screw options. A wide variety of lengths are available tocover a range of clinical applications.

Variable Angle Locking Screw

Variable Angle Locking Peg (Distal Radius)

Variable Angle Non-Locking Screw

Variable Angle Non-Locking Compression Screw

Cannulated & Headless PortfolioThe Flower Cannulated Screw Portfolio is available with Headed & Headless Cannulated Screws in 3 platforms,Small, Medium and Large. All screws within each platform utilize the same instruments, with the exception ofdrill bits, which are based on individual screw diameters.

Small Cannulated: 2.0mm/2.4mmMedium Cannulated: 3.0mm/3.5mm/4.0mm/4.5mmLarge Cannulated: 5.5mm/6.5mm/7.3mm

Small FlowerGroove™Screw Diameters1.5mm/2.0mm/2.4mm

Medium FlowerGroove™Screw Diameters2.7mm/3.0mm/3.5mm/4.0mm


7

Ready-for-Surgery™ Instrumentation

The FlowerCube contains all of the requisite instruments for implanting a Flower Plate or Screw. Allinstruments are single-use, sterile and always Ready-for-Surgery™.

INSTRUMENT KITS:Flower Instrument Kits are sized according to the implant platform with which they are used.

Each Kit comprises of provisional fixation (olive wires, guide wires, or K-wires), Depth Gauge and Screwdriver

K-WIRE KITS (KWK 001 FOR SMALL PLATES)The K-Wire Kit contains the instruments and K-Wires required for plate positioning and screw placement.

Torque Driver (T6 Small)

K-Wires (2)

Plating Depth Gauge

T15 Screwdriver

Olive Wires (2)

Plating Depth Gauge

PRODUCT NO. KIT SIZE SCREW DIAMETERS CONTENTS OF KIT TIGHTENING TORQUE

KWK 001 S 1.5mm/2.0mm/2.4mm Torque Driver T6, Plating Depth Gauge, K-Wires (2) 0.7 Nm

OLIVE WIRE KIT ADVANCED (OWK 201 FOR MEDIUM PLATES)The Olive Wire Kit contains the instruments and olive wires required for plate positioning and screwplacement.

PRODUCT NO. KIT SIZE SCREW DIAMETERS CONTENTS OF KIT

OWK 201 M 2.7mm/3.0mm

T15 (M) Screwdriver, Plating Depth Gauge, Olive Wires (2)3.5mm/4.0mm

Instrument Kits continued


INSTRUMENT KITS (continued)

8

DISTAL RADIUS K-WIRE KIT ADVANCED (KWK 901)The Distal Radius Kit contains the instruments and K-Wires required for the distal radius plate placement.

T6 Screwdriver (for distal screws)

T15 Screwdriver (for shaft screws)

K-Wires (4)

Hook Tip Probe (for use with Depth MeasuringDrill Guide for easy screw length measurement)


KWK 901 S/M 2.4mm/3.5mm T6 Screwdriver, T15 Screwdriver, Hook Tip Probe, 1.4mm K-Wires (4)

Instrument Kits continued

GUIDE WIRE KITS (GWK 100 - SMALL, GWK 200- MEDIUM, GWK 300 - LARGE)Contain all of the instruments required for Cannulated Screw insertion.

Cannulated Screwdriver

Cannulated Depth Gauge & Countersink

CoCr Guide Wires (2)


GWK 100 S 2.0mm/2.4mm T6 Cannulated Screwdriver, Small Cannulated Depth Gauge & Countersink, 0.8mm CoCr Guide Wires (2)

GWK 200 M 3.0mm/3.5mm/4.0mm/4.5mm T15 Cannulated Screwdriver, Medium Cannulated Depth Gauge & Countersink, 1.1mm CoCr Guide Wires (2)

GWK 300 L 5.5mm/6.5mm/7.3mm T25 Cannulated Screwdriver, Large Cannulated Depth Gauge & Countersink, 2.0mm CoCr Guide Wires (2)


9

E-KIT:The Flower E-Kit contains all of the necessary instruments for cases requiring the use of both medium plates

and medium cannulated screws.

E-Kit continued


EWK 201 M 2.7mm/3.0mm/3.5mm/4.0mm T15 Cannulated Screwdriver, Medium Cannulated Depth Gauge/ Countersink, Olive Wires (2), G-Wires (2), Medium Plating Depth Gauge

T15 Cannulated Screwdriver

Cannulated Depth Gauge & Countersink

Olive Wires (2)

CoCr Guide Wires (2)

Plating Depth Gauge

E-KIT™ ADVANCED (EWK 201)

Additional Guide Wires

PRODUCT NO. SIZE MATERIAL G-WIRE DIAMETER

GWK 108 S CoCr 0.8mmGWK 111 M CoCr 1.1mmGWK 120 L CoCr 2.0mmGWK 125 M CoCr 1.25mm

Power Driver Kits

PRODUCT NO. DESCRIPTION

FIM 015 Power Driver G-Wire Kit for 3.0-4.5mm Cannulated Screws (contains T15 power driver bit, 1.1mm x 160mm G-Wires (4))

FIM 025 Power Driver G-Wire Kit for 5.5-7.3mm Cannulated Screws (contains T25 power driver bit, 2.0mm x 160mm G-Wires (4))

INSTRUMENT KITS (continued)


10

PRODUCT NO. CONTENTS OF KIT

EWK 501 FlowerADC Instrument, 1.6mm wire (2), 2.5mm wire (2), 2.5mm wire with stop (2)

1.6mm wire (2)

E-KIT (continued)


FLOWERADC™ KIT (EWK 501)

FlowerADC

2.5mm wire (2)

2.5mm wire with stop (2)

11

DISTAL RADIUS DRILL BIT KIT (FDR 991)For use with Guide Block on distal radius plates for distal screw (1.8mm locking peg or 2.4mm screw) insertion. Laser marked line on the drill allows for screw measurement without requiring a Depth Gauge.


FDR 991 S 1.8mm (Peg), 2.4mm (Screw) Drill Bit: 1.8mm, Depth Measuring Drill Guide

DRILL BIT KITS:Drill Bit Kits and Lag Screw Kits are packaged with the appropriate drill guides. Cannulated and solid drill bits

for all applicable screw diameters are included in the FlowerCube™.

DRILL BIT KITS (DBK)The Drill Bit Kit contains a drill bit and drill guide to prepare a pilot hole for locking and non-locking plating screws.

PRODUCT NO. KIT SIZE SCREW DIAMETERS CONTENTS OF KIT A/O CONNECTION

DBK 015 S 1.5mm Drill Bit, D: 1.1mm, Drill GuideDBK 020 S 2.0mm Drill Bit, D: 1.5mm, Drill Guide 4

DBK 024 S 2.4mm Drill Bit, D: 1.8mm, Drill Guide 4

DBK 027 M 2.7mm Drill Bit, D: 2.0mm, Drill Guide 4




Drill Bit Kits continued


LAG SCREW KITS (LSK)Lag Screw Kits contains a drill bit and drill guide required to apply fragment compression when performing a Lag Screw Technique.

PRODUCT NO. KIT SIZE SCREW DIAMETERS CONTENTS OF KIT DOUBLE-SIDED DRILL GUIDE A/O CONNECTION

LSK 015 S 1.5mm Drill Bit, D: 1.5mm, Drill GuideLSK 020 S 2.0mm Drill Bit, D: 2.0mm, Drill Guide 4

LSK 124 S 2.4mm Drill Bit, D: 2.4mm, Drill Guide 4 4

LSK 127 M 2.7mm Drill Bit, D: 2.7mm, Drill Guide 4 4

LSK 030 M 3.0mm Drill Bit, D: 3.0mm, Drill Guide 4



12

CANNULATED DRILL BIT (CDB)Individually packaged Cannulated Drill Bit.

SCREW DIAMETER PILOT HOLE PRODUCT NO. PILOT HOLE DRILL DIAMETER GLIDING HOLE PRODUCT NO. GLIDING HOLE DRILL DIAMETER

2.0mm CDB 017 1.7mm CBD 020 2.0mm2.4mm CDB 017 1.7mm CBD 024 2.4mm3.0mm CDB 020 2.0mm CBD 030 3.0mm3.5mm CDB 024 2.4mm CDB 035 3.5mm4.0mm CDB 026 2.6mm CDB 040 4.0mm4.5mm CDB 030 3.0 mm CDB 045 4.5mm5.5mm CDB 040 4.0mm - -6.5mm CDB 050 5.0mm CDB 065 6.5mm7.3mm CDB 050 5.0mm - -

ANCILLARY INSTRUMENTS:Ancillary instruments including K-Wires, plate benders and cup & cone reamer sets are included in the FlowerCube™.

Reamer for Four Corner Fusion PlatePRODUCT NO. REAMER DIAMETER

FIS 204 17.5mm

Cannulated Reamer Kits for MTP FusionPRODUCT NO. REAMER DIAMETER

CRK 018 18mmCRK 021 21mmCRK 024 24mm

Plate BendersPRODUCT NO. SIZE PLATE THICKNESS

FIS 231 S 1.0mm/1.5mm/1.7mm/2.0mmFIM 234 M 2.4mm/2.5mm/2.7mm/3.2mm/3.7mm

Additional K-WiresPRODUCT NO. CONTENTS

KWK 102 1.4mm x 140mm K-Wires (2)

Large Bone K-Wire KitThe Large Bone K-Wire Kits is for use with longer Flower M Screws, and includes a Power Screw Driver Bit and K-Wires


FIM 115 T15 Speed Driver Bit, 1.4mmx140mm K-Wires (2)


13

Upper Extremity FlowerCubes™

LOW PROFILE STRAIGHT PLATESPRODUCT NO. WIDTH (mm) LENGTH (mm) THICKNESS (mm) HOLES

FHF 305 5.1 23 1.0 4FHF 306 5.1 35 1.0 6FHF 308 5.1 47 1.0 8FHF 310 5.1 26 1.0 4FHF 315 5.1 95 1.0 16

LOW PROFILE L-PLATESPRODUCT NO. ORIENTATION WIDTH (mm) LENGTH (mm) THICKNESS (mm) HOLES

FHF 320 Right 5.1 29 1.0 6FHF 325 Left 5.1 29 1.0 6

LOW PROFILE OBLIQUE T-PLATESPRODUCT NO. ORIENTATION WIDTH (mm) LENGTH (mm) THICKNESS (mm) HOLES


LOW PROFILE T-PLATESPRODUCT NO. WIDTH (mm) LENGTH (mm) THICKNESS (mm) HOLES

FHF 340 5.1 30 1.0 6FHF 345 5.1 29 1.0 7

LOW PROFILE H-PLATESPRODUCT NO. WIDTH (mm) LENGTH (mm) THICKNESS (mm) HOLES

FHF 350 10.7 15 1.0 2 x 2FHF 355 10.7 25 1.0 3 x 2FHF 360 10.7 35 1.0 4 x 2FHF 365 10.7 55 1.0 6 x 2

FOUR CORNER FUSION PLATESPRODUCT NO. DIAMETER (mm) HOLES

FMP 211 11.5 5FMP 213 13.3 7

HAND FLOWERCUBE:The Hand FlowerCube consists of low profile stabilization plates, locking and non-locking screws, and all required

instruments to treat a wide variety of fracture patterns of the hand, forearm, wrist, and applications for the foot.

Hand FlowerCube continued

Plates (for use with 1.5mm, 2.0mm and 2.4mm screws)


14

Trials

Screws

1.5MM LOCKING (FHF 206-210)LENGTH QUANTITY

6mm 47mm 38mm 49mm 310mm 4

Instruments

PRODUCT NO. INSTRUMENTS QUANTITY

KWK 001 K-Wire Kit, Small 2DBK 015 1.1mm Drill Bit for 1.5mm Screws, Drill Guide 2DBK 020 1.5mm Drill Bit for 2.4mm Screws, Drill Guide 2LSK 015 1.5mm Drill Bit for 1.5mm Lag Screws, Drill Guide 1LSK 020 2.0mm Drill Bit for 2.0mm Lag Screws, Drill Guide 1FIS 204 Flower Reamer for Four Corner Fusion Plate 1FIS 231 Plate Benders (S) (2 Pieces) 1

FOUR CORNER FUSION TRIALSPRODUCT NO.

FIS 013

2.0MM LOCKING (FHF 006-FHF 022)LENGTH QUANTITY

6mm 47mm 48mm 49mm 310mm 412mm 414mm 416mm 418mm 420mm 422mm 4

2.0MM NON-LOCKING (FBS 006-FBS 014)LENGTH QUANTITY

6mm 47mm 38mm 49mm 310mm 412mm 414mm 4

1.5MM NON-LOCKING (FBS 506-FBS 510)LENGTH QUANTITY

6mm 47mm 38mm 49mm 310mm 4

SMALL BONE PLATETRIALSPRODUCT NO.

FIS 300

*2.4mm locking and non-locking available. Additional lengths available.

Hand FlowerCube (continued)


15

ANATOMIC DISTAL RADIUS PLATES, NARROWPRODUCT NO. ORIENTATION WIDTH (mm) LENGTH (mm) HOLES

FDR 001 Left 21.0 51 3FDR 002 Right 21.0 51 3

ANATOMIC DISTAL RADIUS PLATES, STANDARDPRODUCT NO. ORIENTATION WIDTH (mm) LENGTH (mm) HOLES

FDR 011 Left 24.0 51 3FDR 012 Right 24.0 51 3

Plates (for use with 1.8mm pegs, 2.4mm screws and 3.5mm screws)

Trials

Screws

ANATOMIC DISTAL RADIUS PLATE TRIALS, NARROW/STANDARDPRODUCT NO.

FDR 992


8mm 210mm 212mm 214mm 416mm 618mm 620mm 622mm 624mm 626mm 428mm 230mm 2

3.5MM LOCKING (FRP 308-FRP 318)LENGTH QUANTITY

8mm 210mm 212mm 214mm 216mm 218mm 2

2.4MM NON-LOCKING(FBS 114-FBS 124)LENGTH QUANTITY

14mm 216mm 218mm 220mm 222mm 224mm 2

3.5MM COMPRESSION(FCS 510-FCS 518)LENGTH QUANTITY

10mm 312mm 314mm 316mm 218mm 2

1.8MM LOCKING PEGS (FDR 116-FDR 122)LENGTH QUANTITY

16mm 618mm 620mm 622mm 6

*Additional Lengths Available

InstrumentsPRODUCT NO. INSTRUMENTS QUANTITY

KWK 901 Distal Radius K-Wire Kit, Advanced 2FDR 991 1.8mm Drill Bit for 1.8mm Pegs and 2.4mm Screws, Drill Guide 1 DBK 024 1.8mm Drill Bit for 2.4mm Screws, Drilll Guide 1 DBK 035 2.5mm Drill Bit for 3.4mm Screws, Drill Guide 1

DISTAL RADIUS FLOWERCUBE:The Distal Radius FlowerCube consists of anatomically contoured Distal Radius plates, screws and instruments

to treat even the most complex distal radius fractures. Distal Radius plates are packaged along with guide blocks.


16

PROXIMAL HUMERUS PLATESPRODUCT NO. THICKNESS(mm) LENGTH (mm) HOLES

FRP 462 3.7 90.5 9FRP 463 3.7 103.5 10FRP 464 3.7 116.5 11FRP 465 3.7 129.5 12FRP 466 3.7 142.5 13

Plates (for use with 2.7mm, 3.0mm, 3.5mm and 4.0mm screws)

Trials Screws

PROXIMAL HUMERUSPLATE TRIALPRODUCT NO.

FIM 460

OSTEOSYNTHESIS PLATE TRIALS, MEDIUMPRODUCT NO.

FIM 530


12mm 414mm 416mm 418mm 420mm 422mm 424mm 426mm 428mm 430mm 432mm 434mm 436mm 438mm 440mm 445mm 450mm 455mm 460mm 4


12mm 314mm 316mm 318mm 320mm 322mm 324mm 326mm 328mm 330mm 332mm 334mm 336mm 338mm 340mm 345mm 350mm 355mm 360mm 3

*2.7mm and 3.0mm locking available. 2.7mm, 3.0mm and 4.0mmnon-locking available. Additional lengths available.

Instruments


OWK 201 Olive Wire Kit, Medium, Advanced 2DBK 035 2.5mm Drill Bit for 3.5mm Screws, Drill Guide 1FIM 115 Large Bone K-wire Kit 1KWK 102 1.4mm x 140mm K-Wires 1FIM 234 Plate Benders (M) (2 Pieces) 1

OSTEOSYNTHESIS PLATESPRODUCT NO. WIDTH(mm) LENGTH (mm) THICKNESS(mm) HOLES

FRP 531 11 71 3.2 5FRP 532 11 84 3.2 6FRP 533 11 97 3.2 7FRP 534 11 110 3.2 8FRP 535 11 136 3.2 10

PROXIMAL HUMERUS FLOWERCUBE:The Proximal Humerus FlowerCube consists of high strength stabilization plates, screws and all

instruments to treat proximal humerus fractures.


17

COMPRESSION T-PLATES, OBLIQUEPRODUCT NO. ORIENTATION HOLES

FFP 107 Left 7FFP 207 Right 7

Plates (for use with 1.5mm, 2.0mm and 2.4mm screws)

COMPRESSION Y-PLATES PRODUCT NO. HOLES

FFP 306 6FFP 307 7

COMPRESSION T-PLATES PRODUCT NO. HOLES

FFP 317 7FFP 318 8

AKIN PLATEPRODUCT NO. HOLES

FFP 302 2

STRAIGHT PLATESPRODUCT NO. WIDTH (mm) LENGTH (mm) THICKNESS (mm) HOLES

FHF 405 5.4 23 1.5 4FHF 406 5.4 35 1.5 6FHF 408 5.4 47 1.5 8FHF 410 5.4 26 1.5 4FHF 415 5.4 95 1.5 16

L-PLATESPRODUCT NO. ORIENTATION WIDTH (mm) LENGTH (mm) THICKNESS (mm) HOLES


OBLIQUE T-PLATESPRODUCT NO. ORIENTATION WIDTH (mm) LENGTH (mm) THICKNESS (mm) HOLES


T-PLATESPRODUCT NO. WIDTH (mm) LENGTH (mm) THICKNESS (mm) HOLES

FHF 440 5.4 30 1.5 6FHF 445 5.4 29 1.5 7

Forefoot FlowerCube continued

FOREFOOT FLOWERCUBE:The Forefoot FlowerCube consists of low profile stabilization plates, locking and non-locking screws and all required

instruments required to treat a wide variety of fractures, osteotomies and fusions of the lesser metatarsals.

Lower Extremity FlowerCubes™


*Additionally available

18

Trials

LESSER METATARSALPLATE TRIALSPRODUCT NO.

FIS 614

SMALL BONEPLATE TRIALSPRODUCT NO.

FIS 300

Instruments


KWK 001 K-Wire Kit, Small 2 DBK 020 1.5mm Drill Bit for 2.0mm Screws, Drill Guide 2 DBK 024 1.8mm Drill Bit for 2.4mm Screws, Drill Guide 2 KWK 102 1.4mm x 140mm K-Wires (2) 1 LSK 020 2.0mm Drill Bit for 2.0mm Lag Screws, Drill Guide 1LSK 124 2.4mm Drill Bit for 2.4mm Lag Screws, Drill Guide 1 FIS 231 Plate Benders (S) (2) 1

H-PLATESPRODUCT NO. WIDTH (mm) LENGTH (mm) THICKNESS (mm) HOLES

FHF 450 11 15 1.5 2x2FHF 455 11 25 1.5 3x2FHF 460 11 35 1.5 4x2FHF 465 11 55 1.5 6x2


6mm 38mm 410mm 512mm 514mm 416mm 318mm 320mm 2




6mm 38mm 310mm 312mm 314mm 316mm 318mm 220mm 222mm 2

*1.5mm locking and non-locking available. Additional lengths available.

Screws



Forefoot FlowerCube (continued)


Plates Additionally Available

LAPIDUS PLATESPRODUCT NO. ORIENTATION HOLES

LFP 011* Right 4LFP 012* Left 4LFP 111* Right 5LFP 112* Left 5


LAPIDUS PLATES (LOW PROFILE LOCKING)PRODUCT NO. VERSION HOLES

LFP 401 Alpha 4LFP 402 Beta 4

STRAIGHT PLATES WITH SLOTSPRODUCT NO. LENGTH(mm) HOLES

FFP 094 40 4FFP 095 48 5FFP 096 56 6

LOW PROFILE LOCKING PLATE*PRODUCT NO. HOLES

FFP 082 2FFP 083 3FFP 084 4FFP 085 5FFP 086 6FFP 087 7FFP 088 8

OPENING WEDGE PLATE*PRODUCT NO. WEDGE LENGTH (mm)

FOW 020* 2 FOW 030* 3 FOW 035* 3.5 FOW 040* 4 FOW 045* 4.5 FOW 050* 5 FOW 060* 6

MTP PLATES (INLINE) PRODUCT NO. ORIENTATION HOLES

MFP 011 Right 5MFP 012 Left 5MFP 111* Right 6MFP 112* Left 6

MTP PLATES (CONVERGENT)) PRODUCT NO. ORIENTATION HOLES

MFP 401 Left 6MFP 402 Right 6

TWO HOLE LOCKING PLATEPRODUCT NO. LENGTH(mm) HOLES

FFP 071 24 2

TWO HOLE COMPRESSION PLATEPRODUCT NO. LENGTH(mm) HOLES

FFP 072 24 2

UTILITY PLATESPRODUCT NO. HOLES

FFP 014 4FFP 015 5

TMT PLATESPRODUCT NO. ORIENTATION HOLES

FFP 001 Left 5FFP 002 Right 5FFP 006 Straight 6

X-PLATEPRODUCT NO. LENGTH(mm) WIDTH(mm) HOLES

FFP 617 25 18 4

X-COMPRESSION PLATESPRODUCT NO. LENGTH(mm) WIDTH(mm) HOLES

FFP 618* 25 18 5FFP 622 30 18 5

NC PLATES (NAVICULARCUNEIFORM FUSION)PRODUCT NO. ORIENTATION HOLES

FFP 021 Right 5FFP 022 Left 5

MCP PLATESPRODUCT NO. ORIENTATION LENGTH (mm)

MCP 001 Left 70MCP 002 Right 70

19

Midfoot FlowerCube continued

MIDFOOT FLOWERCUBE:The Midfoot FlowerCube consists of anatomically contoured plates, locking and non-locking screws and all

required instruments to treat bunionectomies, fractures, osteotomies, and joint fusions of the midfoot.


*Additionally available

Midfoot FlowerCube continued

Trials

MTP PLATE TRIALSPRODUCT NO.

FIS 601FIS 621

T-PLATE TRIALSPRODUCT NO.

FIS 603

LAPIDUS PLATE TRIALSPRODUCT NO.

FIS 622

NC PLATE TRIALSPRODUCT NO.

FIS 607

OPENING WEDGE PLATETRIALS*PRODUCT NO.

FIS 624

UTILITY PLATE TRIALSPRODUCT NO.

FIS 608

X-PLATE TRIALSPRODUCT NO.

FIS 611

MEDIAL COLUMN PLATETRIALSPRODUCT NO.

FIS 615

TWO HOLE PLATETRIALSPRODUCT NO.

FIS 612CANNULATED REAMERTRIALS (FOR USE WITH THE MTP PLATE)PRODUCT NO.

FIM 613

STRAIGHT PLATEWITH SLOTS TRIALSPRODUCT NO.

FIS 610

Midfoot FlowerCube (continued)

Flower Orthopedics Corporation T: 877.778.8587 F: 215.394.8904100 Witmer Road, Suite 280, Horsham, PA 19044 www.flowerortho.com20

21Flower Orthopedics Corporation T: 877.778.8587 F: 215.394.8904100 Witmer Road, Suite 280, Horsham, PA 19044 www.flowerortho.com

Midfoot FlowerCube (continued)

3.0MM LOCKING (FLP 308-324)LENGTH QUANTITY



10mm 212mm 214mm 216mm 218mm 220mm 222mm 224mm 226mm 228mm 230mm 232mm 234mm 236mm 238mm 240mm 245mm 2



*3.5mm locking available. 3.0mm and 4.0mm non-locking available. Additional lengths available.

Screws2.7MM LOCKING (FLP 208-FLP 224)LENGTH QUANTITY



EWK 201 Flower E-Kit, Advanced 1OWK 201 Olive Wire Kit, Medium, Advanced 1DBK 027 2.0mm Drill Bit for 2.7mm Screws, Drill Guide 1DBK 035 2.5mm Drill Bit for 3.5mm Screws, Drill Guide 1FIS 231 Plate Benders (S) (2) 1KWK 102 1.4mm x 140mm K-wires (2) 1LSK 035 3.5mm Drill Bit for 3.5mm Lag Screws, Drill Guide 1LSK 127 - 1CRK 018 Cannulated Reamer Kit, 18mm 1CRK 021 Cannulated Reamer Kit, 21mm 1CRK 024 Cannulated Reamer Kit, 24mm 1

FlowerGraft™ FlowerCube™


The FlowerGraft™ Preshaped Bone Wedge System is a complete line of preshaped structuralallografts for Evans and Cotton procedures. FlowerGraft Preshaped Bone Wedges offer surgeonsconvenient, safe, reliable, Ready-for-Surgery™ options for performing reconstruction procedures inthe foot and ankle.

• Allografts packaged in saline, eliminating the need for intra-operative preparation• Bicortical allograft design for increased strength• Preshaped for Evans and Cotton Osteotomies• Allografts are gamma sterilized• Low-profile bridge plates available for fixating allograftsBICORTICAL, PRESHAPED ALLOGRAFTSPRODUCT NO. PRODUCT DESCRIPTION HEIGHT 1 HEIGHT 2 WIDTH LENGTH

AGB 106 Bi-cortical Preshaped Evans Allograft 6mm 4mm 22mm 22mmAGB 108 Bi-cortical Preshaped Evans Allograft 8mm 5mm 22mm 22mmAGB 110 Bi-cortical Preshaped Evans Allograft 10mm 5mm 22mm 22mmAGB 112 Bi-cortical Preshaped Evans Allograft 12mm 5mm 22mm 22mmAGB 305 Bi-cortical Preshaped Cotton Allograft 5mm - 16mm 22mmAGB 306 Bi-cortical Preshaped Cotton Allograft 6mm - 16mm 22mmAGB 307 Bi-cortical Preshaped Cotton Allograft 7mm - 16mm 22mmAGB 308 Bi-cortical Preshaped Cotton Allograft 8mm - 16mm 22mm


AGB 901 Cotton Trial, Tamp, 1.6mm x 140mm K-Wire

AGB 902 Evans Trial, Tamp, 1.6mm x 140mm K-Wire

Osteotomy Kits Screws


DBK 035 Drill Bit, D: 2.5mm Drill Guide 1AGB 901 Cotton Trial, Tamp, 1.6mm x 140mm K-Wire 1AGB 902 Evans Trial, Tamp, 1.6mm x 140mm K-Wire 1

OWK 201T15 Screwdriver, Plating Depth Gauge (Medium),

Plate Tack (Medium)1

FIS 231 Plate Bender (S) 2 Pieces 1EWK 501 FlowerADC™ 1

3.5MM LOCKING (FRP 310 – FRP 340)LENGTH QUANTITY

10mm 212mm 314mm 316mm 318mm 320mm 322mm 324mm 326mm 228mm 230mm 232mm 234mm 236mm 238mm 240mm 2

3.5MM NON-LOCKING (FBS 316 – FBS 324)LENGTH QUANTITY

16mm 218mm 220mm 222mm 224mm 2

*2.7mm and 3.0mmlocking and non-lockingavailable. Additionallengths available

PRODUCT NO. PRODUCT DESCRIPTION

AGB 116 Evans Plate, 16mm, LeftAGB 216 Evans Plate, 16mm, RightAGB 120 Evans Plate, 20mm, LeftAGB 220 Evans Plate, 20mm, Right

Evans Plates

Trials

STRAIGHT LOCKINGFIBULA PLATE TRIALSPRODUCT NO.

FIS 657

ANATOMIC DISTALFIBULA PLATE TRIALSPRODUCT NO.

FIS 653

STRAIGHT LOCKINGFIBULA WITHSYNDESMOTIC SLOTPLATE TRIALSPRODUCT NO.

FIS 652



STRAIGHT LOCKING FIBULA PLATESPRODUCT NO. LENGTH(mm) HOLES

DLF 505 59 5DLF 506 71 6DLF 507 85 7DLF 508 95 8DLF 510 119 10

STRAIGHT LOCKING FIBULA PLATES WITHSYNDESMOTIC SLOT* PRODUCT NO. LENGTH(mm) HOLES

DLF 006 77.1 6DLF 007 89.1 7DLF 008 101.1 8

ANATOMIC DISTAL FIBULA PLATES PRODUCT NO. ORIENTATION LENGTH(mm) HOLES

DLF 104 Left 85.5 4DLF 204 Right 85.5 4DLF 105 Left 103 5DLF 205 Right 103 5DLF 107 Left 127 7DLF 207 Right 127 7

Fibula FlowerCube continued

FIBULA FLOWERCUBE:The Fibula FlowerCube consists of straight and anatomic fibula plates, locking and non-locking screws

and all required instruments to treat fibula fractures.

* Additionally available

Lower Extremity FlowerCubes™

24


10mm 612mm 614mm 616mm 418mm 420mm 322mm 2





Screws

2.7MM LOCKING (FLP 210-FLP 220)LENGTH QUANTITY

10mm 312mm 314mm 316mm 318mm 220mm 222mm 2

Instruments


OWK 201 Olive Wire Kit, Medium, Advanced 2 DBK 027 2.0mm Drill Bit for 2.7mm Screws, Drill Guide 1 DBK 035 2.5mm Drill Bit for 3.5mm Screws, Drill Guide 2 DBK 040 3.0mm Drill Bit for 4.0mm Screws, Drill Guide 1LSK 127 2.7mm Drill Bit for 2.7mm Lag Screws, Drill Guide 1 LSK 035 3.5mm Drill Bit for 3.5mm Lag Screws, Drill Guide 1 LSK 040 4.0mm Drill Bit for 4.0mm Lag Screws, Drill Guide 1KWK 102 1.4mm x 140mm K-Wires (2) 1FIM 115 Large Bone K-wire Kit 1FIS 231 Plate Benders (S) (2) 1

*3.0mm locking available. 2.7mm and 3.0mm non-locking/compression available. Additional lenghts available

Fibula FlowerCube (continued)


25


ANTERIOR LATERAL DISTAL TIBIA PLATESPRODUCT NO. ORIENTATION LENGTH(mm) HOLES

DLT 107 Left 110 7DLT 207 Right 100 7DLT 110 Left 146 10DLT 210 Right 146 10

MEDIAL DISTAL TIBIA PLATES (PACKAGED WITH MISINSERTION POST) PRODUCT NO. ORIENTATION LENGTH(mm) HOLES

DMT 308 Left 153.5 8DMT 408 Right 153.5 8DMT 310 Left 177.5 10DMT 410 Right 177.5 10

DISTAL TIBIA A PLATES (ANTERIOR OR POSTERIOR) PRODUCT NO. LENGTH(mm) WIDTH(mm) HOLES

DAT 005 44 27 5

Trials

MEDIAL DISTAL TIBIAPLATE TRIALSPRODUCT NO.

FIS 650

DISTAL TIBIA A-PLATETRIALSPRODUCT NO.

FIS 654

ANTERIOR LATERALDISTAL TIBIA PLATETRIALSPRODUCT NO.

FIS 651

Tibia FlowerCube continued

TIBIA FLOWERCUBE:The Tibia FlowerCube consists of anatomically contoured tibia plates, locking and non-locking screws and all

required instruments to treat tibia fractures.


26

Instruments


OWK 201 Olive Wire Kit, Medium, Advanced 1 DBK 035 2.5mm Drill Bit for 3.5mm Screws, Drill Guide 1 DBK 040 3.0mm Drill Bit for 4.0mm Screws, Drill Guide 1 LSK 035 3.5mm Drill Bit for 3.5mm Lag Screws, Drill Guide 1 LSK 040 4.0mm Drill Bit for 4.0mm Lag Screws, Drill Guide 1 KWK 102 1.4mm x 140mm K-Wires (2) 1 FIM 115 Large Bone K-wire Kit 1FIM 234 Plate Benders (M) 1


14mm 316mm 318mm 320mm 322mm 324mm 326mm 328mm 330mm 332mm 334mm 336mm 338mm 340mm 3



Screws



* 2.7mm and 3.0mm locking available. 2.7mm and 3.0mm non-locking/compression available. Additional lengths available.

Tibia FlowerCube (continued)


Cannulated Screw FlowerCubes™

27

2.4MM PARTIALLYTHREADED (CSP 110-CSP 130)LENGTH QUANTITY


Cannulated Screws



Instruments


GWK 100 Guide Wire Kit, 2.0/2.4 2GWK 108 CoCr Guide Wires, 0.8mm x 160mm (2) 2CDB 017 1.7mm Cannulated Drill Bit for 2.0mm and 2.4mm screws 2CDB 024 Cannulated Drill Bit for 2.4mm Screw (drilling the far cortex for HCS) 1

Headless Compression Screws

2.4MM (HCS 110-HCS 140)LENGTH QUANTITY

10mm 312mm 314mm 316mm 318mm 320mm 322mm 324mm 326mm 328mm 332mm 336mm 340mm 3

SMALL CANNULATED FLOWERCUBE:The Small Cannulated FlowerCube consists of 2.0mm and 2.4mm partially threaded cannulated screws and all

required instruments to treat fractures, osteotomies and joint fusions of small bones.


28

*3.5mm and 4.5mm partially threaded screwsadditionally available

3.0mm, 3.5mm, 4.0mm and 4.5mm fully threadedcannulated screws available. Additional lengthsavailable


20mm 222mm 224mm 226mm 228mm 230mm 232mm 234mm 236mm 238mm 240mm 245mm 2

4.5MM PARTIALLYTHREADED* (CSP 530-CSP 570)

LENGTH

30mm 32mm 34mm 36mm 38mm 40mm 45mm 50mm 55mm 60mm 65mm 70mm

4.0MM PARTIALLYTHREADED (CNP 416 – CNP 460)LENGTH QUANTITY

16mm 218mm 220mm 222mm 224mm 226mm 228mm 230mm 232mm 234mm 236mm 238mm 240mm 245mm 250mm 255mm 260mm 2

Cannulated Screws



Instruments


GWK 200 Guide Wire Kit, 3.0/3.5/4.0/4.5 2OSW 100 Screw Washer, D:3.5mm/4.0mm/4.5mm 2GWK 111 Guide Wires, 1.1mm x 160mm (2) 1CDB 020 2.0mm Cannulated Drill Bit for 3.0mm screws 2CDB 024 2.4mm Cannulated Drill Bit for 3.5mm screws 1CDB 026 2.6mm Cannulated Drill Bit for 4.0mm screws 2CDB 030 3.0mm Cannulated Drill Bit for 4.5mm screws 1CDB 040 4.0mm Cannulated Drill Bit 1FIM 015 Power Driver G-Wire Kit, 3.0/4.0/3.5/4.5mm screws 1

MEDIUM CANNULATED FLOWERCUBE:The Medium Cannulated FlowerCube consists of 3.0mm, 3.5mm, 4.0mm and 4.5mm partially threaded

cannulated screws, washers and all required instruments to treat a variety of fractures, fusions and osteotomies.


Headless Compression Screws





29

6.5MM FULLY THREADED (CSF 740-CSF 780)LENGTH QUANTITY


Cannulated Screws



Instruments


GWK 300 Guide Wire Kit, 5.5/6.5/7.3 2OSW 200 Osteo Screw Washer, D:5.5mm/6.5mm/7.3mm 2FIM 025 Power Driver G-Wire Kit 1GWK 120 Guide Wires, 2.0mm x 160mm (2) 1CDB 040 4.0mm Cannulated Drill Bit for 5.5mm screws 1CDB 050 5.0mm Cannulated Drill Bit for 6.5mm and 7.3mm screws 2CDB 065 6.5mm Cannulated Drill Bit for 6.5mm fully threaded screws 1

LARGE CANNULATED FLOWERCUBE:The Large Cannulated FlowerCube consists of 5.5mm, 6.5mm and 7.3mm cannulated screws and all required

instruments to treat fusions, osteotomies and fractures of the foot, ankle and long bones.






30

General Use Plates

Flower Orthopedics offers a wide range of Reconstruction and Ostesynthesis plates in various sizes for generaluse. These plates can be added to any custom FlowerCube configuration.

LOW PROFILE RECONSTRUCTION PLATESPRODUCT NO. WIDTH(mm) LENGTH (mm) THICKNESS(mm) HOLES

FHF 703 6.2 18 1.5 3FHF 704 6.2 24 1.5 4FHF 705 6.2 30 1.5 5FHF 706 6.2 36 1.5 6FHF 707 6.2 42 1.5 7FHF 708 6.2 48 1.5 8FHF 709 6.2 54 1.5 9FHF 710 6.2 60 1.5 10

LOW PROFILE RECONSTRUCTION T-PLATESPRODUCT NO. WIDTH(mm) LENGTH (mm) THICKNESS(mm) HOLES

FHF 724 6.2 18 1.5 4FHF 725 6.2 24 1.5 5FHF 726 6.2 30 1.5 6FHF 727 6.2 36 1.5 7FHF 728 6.2 42 1.5 8FHF 729 6.2 48 1.5 9

RECONSTRUCTION PLATESPRODUCT NO. WIDTH(mm) LENGTH (mm) THICKNESS(mm) HOLES

FHF 904 7.8 30 2.0 4FHF 905 7.8 37.5 2.0 5FHF 906 7.8 45 2.0 6FHF 907 7.8 52.5 2.0 7FHF 908 7.8 60 2.0 8FHF 909 7.8 67.5 2.0 9FHF 910 7.8 75 2.0 10FHF 912 7.8 90 2.0 12FHF 914 7.8 105 2.0 14

RECONSTRUCTION T-PLATESPRODUCT NO. WIDTH(mm) LENGTH (mm) THICKNESS(mm) HOLES

FHF 924 7.8 22.5 2.0 4FHF 925 7.8 30 2.0 5FHF 926 7.8 37.5 2.0 6FHF 927 7.8 45 2.0 7FHF 928 7.8 52.5 2.0 8FHF 929 7.8 60 2.0 9

Small Reconstruction Plates (for use with 1.5mm, 2.0mm and 2.4mm Screws)

General Use Plates continued


31

LOW PROFILE RECONSTRUCTION PLATESPRODUCT NO. WIDTH(mm) LENGTH (mm) THICKNESS(mm) HOLES

FRP 704 9.5 36 2.5 4FRP 705 9.5 45 2.5 5FRP 706 9.5 54 2.5 6FRP 707 9.5 63 2.5 7FRP 708 9.5 72 2.5 8FRP 709 9.5 81 2.5 9FRP 710 9.5 90 2.5 10FRP 712 9.5 108 2.5 12FRP 714 9.5 126 2.5 14FRP 716 9.5 144 2.5 16

RECONSTRUCTION PLATESPRODUCT NO. WIDTH(mm) LENGTH (mm) THICKNESS(mm) HOLES

FRP 904 11.7 44 3.2 4FRP 905 11.7 55 3.2 5FRP 906 11.7 66 3.2 6FRP 907 11.7 77 3.2 7FRP 908 11.7 88 3.2 8FRP 909 11.7 99 3.2 9FRP 910 11.7 110 3.2 10FRP 911 11.7 121 3.2 11FRP 912 11.7 132 3.2 12FRP 914 11.7 154 3.2 14FRP 915 11.7 165 3.2 15FRP 916 11.7 176 3.2 16FRP 918 11.7 198 3.2 18FRP 920 11.7 220 3.2 20

REVISION RECONSTRUCTION PLATESPRODUCT NO. WIDTH(mm) LENGTH (mm) THICKNESS(mm) HOLES

FRP 930 13.5 65 3.7 5FRP 931 13.5 78 3.7 6FRP 932 13.5 91 3.7 7FRP 933 13.5 104 3.7 8FRP 934 13.5 117 3.7 9FRP 935 13.5 130 3.7 10FRP 936 13.5 143 3.7 11FRP 937 13.5 156 3.7 12FRP 938 13.5 182 3.7 14FRP 939 13.5 195 3.7 15

Medium Reconstruction Plates (2.7mm, 3.0mm, 3.5mm and 4.0mm screws)


General Use Plates (continued)


32

LOW PROFILE OSTEOSYNTHESIS PLATESPRODUCT NO. WIDTH(mm) LENGTH (mm) THICKNESS(mm) HOLES

FRP 520 9 42 2.5 4FRP 521 9 51 2.5 5FRP 522 9 60 2.5 6FRP 523 9 69 2.5 7FRP 524 9 78 2.5 8FRP 525 9 96 2.5 10FRP 526 9 114 2.5 12FRP 527 9 141 2.5 15

REVISION OSTEOSYNTHESIS PLATESPRODUCT NO. WIDTH(mm) LENGTH (mm) THICKNESS(mm) HOLES



FHF 371 7 34 2.0 4FHF 372 7 41 2.0 5FHF 373 7 48 2.0 6FHF 374 7 55 2.0 7FHF 375 7 62 2.0 8FHF 376 7 76 2.0 10FHF 377 7 90 2.0 12FHF 378 7 111 2.0 15



Small Osteosynthesis Plates (for use with 1.5mm, 2.0mm and 2.4mm screws)

Medium Osteosynthesis Plates (for use with 2.7mm, 3.0mm, 3.5mm and 4.0mm screws)




33


REVISION OSTEOSYNTHESIS PLATES, WIDEPRODUCT NO. WIDTH(mm) LENGTH (mm) THICKNESS(mm) HOLES



FlowerCart™

Designed with OR efficiency and ease of use mind, the FlowerCart providesa mobile inventory solution for Flower’s single-use, sterile product in highvolume facilities. Fully customizable, the FlowerCart contains enoughinventory for multiple back-to-back and simultaneous cases without the needto re-stock. The inventory can be consolidated and standardized to bestmeet the needs of each individual facility.

• Right amount of product always available• Fully customizable configuration• Supports multiple cases in multiple ORs• Reduces complexity of inventory management• Decreases traffic in and out of the OR

Flower Biologics™

FlowerDerm™FlowerDerm is an acellular mesheddermal allograft intended to be used as awound covering. FlowerDerm is available in two convenient sizes forimproved handling, delivery and optimal coverage.

• Biocompatible, remodelable, acellular dermal matrix• Minimizes inflammation, encourages vascularization & cell repopulation• Sterile – gamma irradiated to SAL 10-6

• Excellent tensile strength and suture retention strength• Remodels naturally without the need for chemical crosslinking• Ready-for-Surgery – no rehydration required

FlowerPatch™FlowerPatch™ is a dehydrated amniotic membraneallograft intended to be used as a wound covering.FlowerPatch is available in two thicknesses and variousconfigurations for improved handling, delivery, andoptimal coverage.

• Hydrophylic – adheres without fixation• Easy to cut or shape• No specific orientation required• Creates no additional bulk at the site• Resorbs naturally• 5 year shelf life

PRODUCT NO. SIZE

FBP 204 2x4cmFBP 404 4x4cmFBP 406 4x6cmFBP 408 4x8cm

FlowerFlo™FlowerFlo™ is a pre-mixed ambient temperatureplacental tissue matrix allograft, intended to replaceor supplement damaged or inadequate integumentaltissue.

• Room temperature storage• Flowable tissue matrix – no mixing

required• Easy and precise to target tissues• 5 year shelf life

PRODUCT NO. VOLUME MIXABLE TO

FBF 050 0.5cc 1.0ccFBF 100 1.0cc 2.0ccFBF 200 2.0cc 4.0cc


PRODUCT NO. SIZE THICKNESS

FDM 555 5x5cm, Meshed 0.4mm - 1.0mmFDM 558 5x8cm Meshed 0.4mm - 1.0mm

Product List

35


FDR 001 Distal Radius Plate, Narrow, Left, 3 HolesFDR 002 Distal Radius Plate, Narrow, Right, 3 HolesFDR 011 Distal Radius Plate, Standard, Left, 3 HolesFDR 012 Distal Radius Plate, Standard, Right, 3 HolesFHF 305 Low Profile Straight Plate, 4 Holes FHF 306 Low Profile Straight Plate, 6 Holes FHF 308 Low Profile Straight Plate, 8 Holes FHF 310 Low Profile Straight Plate, 4 Holes with Bar FHF 315 Low Profile Straight Plate, 16 Holes FHF 320 Low Profile L-Plate, Right, 6 Holes FHF 325 Low Profile L-Plate (Left), 6 Holes FHF 330 Low Profile Oblique T-Plate, Right, 6 Holes FHF 335 Low Profile Oblique T-Plate, Left, 6 Holes FHF 340 Low Profile T-Plate, 6 Holes FHF 345 Low Profile T-Plate, 7 Holes FHF 350 Low Profile H-Plate, 2x2 Holes FHF 355 Low Profile H-Plate, 3x2 Holes FHF 360 Low Profile H-Plate, 4x2 Holes FHF 365 Low Profile H-Plate, 6x2 Holes FMP 211 Four Corner Fusion Plate, 5 HolesFMP 213 Four Corner Fusion Plate, 7 HolesFRP 462 Proximal Humerus Plate, 9 Holes FRP 463 Proximal Humerus Plate, 10 Holes FRP 464 Proximal Humerus Plate, 11 Holes FRP 465 Proximal Humerus Plate, 12 Holes FRP 466 Proximal Humerus Plate, 13 Holes

PlatesUPPER EXTREMITY


DAT 005 Distal Tibial A-Plate, 5 HolesDLF 006 Straight Locking Fibula Plate with Slot, 6 HolesDLF 007 Straight Locking Fibula Plate with Slot, 7 HolesDLF 008 Straight Locking Fibula Plate with Slot, 8 holesDLF 104 Anatomic Distal Fibula Plate, 4 Holes, LeftDLF 105 Anatomic Distal Fibula Plate, 5 Holes, LeftDLF 107 Anatomic Distal Fibula Plate, 7 Holes, Left DLF 204 Anatomic Distal Fibula Plate, 4 Holes, RightDLF 205 Anatomic Distal Fibula Plate, 5 Holes, RightDLF 207 Anatomic Distal Fibula Plate, 7 Holes, RightDLF 505 Straight Locking Fibula Plate, 5 HolesDLF 506 Straight Locking Fibula Plate, 6 HolesDLF 507 Straight Locking Fibula Plate, 7 HolesDLF 508 Straight Locking Fibula Plate, 8 HolesDLF 510 Straight Locking Fibula Plate, 10 HolesDLT 107 Anterior Lateral Distal Tibial Plate, 7 Holes, LeftDLT 110 Anterior Lateral Distal Tibial Plate, 10 Holes, LeftDLT 207 Anterior Lateral Distal Tibial Plate, 7 Holes, RightDLT 210 Anterior Lateral Distal Tibial Plate, 10 Holes, RightDMT 308 Medial Distal Tibial Plate, 8 Holes, LeftDMT 310 Medial Distal Tibial Plate, 10 Holes, LeftDMT 408 Medial Distal Tibial Plate, 8 Holes, RightDMT 410 Medial Distal Tibial Plate, 10 Holes, RightFFP 001 TMT Plate, 5 Holes, RightFFP 002 TMT Plate, 5 Holes, LeftFFP 006 TMT Straight Plate, 6 Holes FFP 014 Utility Plate, 4 Holes FFP 015 Utility Plate, 5 Holes FFP 021 NC Plate, Right FFP 022 NC Plate, Left FFP 071 Two Hole Locking Plate

LOWER EXTREMITY


FFP 072 Two Hole Compression Plate FFP 082 Low Profile Locking Plate, 2 HolesFFP 083 Low Profile Locking Plate, 3 HolesFFP 084 Low Profile Locking Plate, 4 HolesFFP 085 Low Profile Locking Plate, 5 HolesFFP 086 Low Profile Locking Plate, 6 HolesFFP 087 Low Profile Locking Plate, 7 HolesFFP 088 Low Profile Locking Plate, 8 HolesFFP 094 Straight Plate with Slots, 4 HolesFFP 095 Straight Plate with Slots, 5 HolesFFP 096 Straight Plate with Slots, 6 Holes, FFP 107 Compression T-Plate, Oblique Left, 7 HolesFFP 207 Compression T-Plate, Oblique Right, 7 HolesFFP 302 Akin Plate, 2 Holes FFP 306 Compression Y-Plate, 6 HolesFFP 307 Compression Y-Plate, 7 HolesFFP 317 Compression T-Plate, 7 HolesFFP 318 Compression T-Plate, 8 HolesFFP 617 X Plate, 17mm LongFFP 618 X Compression PlateFFP 622 X Compression Plate,FHF 405 Straight Plate, 4 Holes FHF 406 Straight Plate, 6 Holes FHF 408 Straight Plate, 8 Holes FHF 410 Straight Plate, 4 Holes with Bar FHF 415 Straight Plate, 16 Holes FHF 420 L-Plate, Right, 6 Holes FHF 425 L-Plate, Left, 6 Holes FHF 430 Oblique T-Plate, Right, 6 Holes FHF 435 Oblique T-Plate, Left, 6 Holes FHF 440 T-Plate, 6 Holes FHF 445 T-Plate, 7 Holes FHF 450 H-Plate, 2x2 Holes FHF 455 H-Plate, 3x2 Holes FHF 460 H-Plate, 4x2 Holes FHF 465 H-Plate, 6x2 Holes FHF 923 12mm H-Plate, 5 HolesFHF 934 14mm H-Plate, 5 HolesFHF 936 16mm H-Plate, 6 Holes FOW 020 Opening Wedge Plate, 2mm FOW 030 Opening Wedge Plate, 3mm FOW 035 Opening Wedge Plate, 3.5mm FOW 040 Opening Wedge Plate, 4mm FOW 045 Opening Wedge Plate, 4.5mm FOW 050 Opening Wedge Plate, 5mm FOW 060 Opening Wedge Plate, 6mm MCP 001 Medial Column Plate, LeftMCP 002 Medial Column Plate, RightMFP 011 MTP Plate, 5 Holes, Right MFP 012 MTP Plate, 5 Holes, Left MFP 111 MTP Plate, 6 Holes, RightMFP 112 MTP Plate, 6 Holes, Left MFP 401 MTP Plate, LeftMFP 402 MTP Plate, RightLFP 011 Lapidus Plate, 4 Holes, Right LFP 012 Lapidus Plate, 4 Holes, Left LFP 111 Lapidus Plate, 5 Holes, Right LFP 112 Lapidus Plate, 5 Holes, Left LFP 401 Lapidus Plate, AlphaLFP 402 Lapidus Plate, Beta

LOWER EXTREMITY (CONTINUED)


36

GENERAL USE GENERAL USE (CONTINUED)


FDR 992 Distal Radius Plate TrialsFIM 460 Humerus Plate TrialsFIM 500 Revision Osteo Plate Trials, MediumFIM 501 Revision Medium Osteo Plate Trials (Long)FIM 530 Osteo Plate Trials, MediumFIM 700 Low Profile Recon Plate Trials, SmallFIM 701 Low Profile Recon Plate & Recon Plate Trials, Medium (Long)FIM 930 Revision Recon Plate Trials, MediumFIS 013 Four Corner Fusion Plate TrialsFIS 200 Evans Plate TrialsFIS 300 Small Bone Plate TrialsFIS 370 Osteo Plate, Small & Low Profile Osteo Plate TrialsFIS 601 Angled & Inclined Plate TrialsFIS 602 Elongated L-Plate TrialsFIS 603 TMT Plate TrialsFIS 607 NC Plate TrialsFIS 608 Utility Plate TrialsFIS 609 N-C Fusion Plate TrialFIS 610 Straight Plate with Slots TrialsFIS 611 X Plate TrialsFIS 612 Two Hole Plate TrialsFIS 613 Cannulated Reamer TrialsFIS 614 Lesser Metatarsal Plate TrialsFIS 615 Medial Column Plate TrialsFIS 621 MTP Plate TrialsFIS 622 Lapidus Plate TrialsFIS 623 Opening Wedge Plate Trial FIS 650 Medial Distal Tibial Plate TrialsFIS 651 Anterior Lateral Distal Tibial Plate TrialsFIS 652 Straight Fibular Plate TrialsFIS 653 Anatomic Distal Fibular Plate TrialsFIS 654 Distal Tibial A-Plate TrialsFIS 657 Straight Locking Fibula Plate TrialsFIS 700 Low Profile Recon Plate & Recon Plate Trials, MediumFIS 720 Low Profile Recon T-Plate Trials, SmallFIS 900 Recon Plate Trials, SmallFIS 920 Recon T-Plate TrialsFIS 930 H-Plate Trials

Trials



FHF 371 Low Profile Straight Osteo Plate, 4 Holes FHF 372 Low Profile Osteo Plate, 5 Holes FHF 373 Low Profile Osteo Plate, 6 Holes FHF 374 Low Profile Osteo Plate, 7 Holes FHF 375 Low Profile Osteo Plate, 8 Holes FHF 376 Low Profile Osteo Plate, 10 Holes FHF 703 Low Profile Recon Plate, 3 Holes FHF 704 Low Profile Recon Plate, 4 HolesFHF 705 Low Profile Reconstruction Plate, 5 HoleFHF 706 Low Profile Reconstruction Plate, 6 HoleFHF 707 Low Profile Reconstruction Plate, 7 HoleFHF 708 Low Profile Recon Plate, 8 Holes FHF 709 Low Profile Recon Plate, 9 Holes FHF 710 Low Profile Recon Plate, 10 Holes FHF 724 Low Profile Recon T-Plate, 4 Holes FHF 725 Low Profile Reconstruction T Plate, 5 HolesFHF 726 Low Profile Reconstruction T Plate, 6 HolesFHF 727 Low Profile Reconstruction T Plate, 7 HolesFHF 728 Low Profile Recon T-Plate, 8 Holes FHF 729 Low Profile Recon T-Plate, 9 Holes FHF 904 Recon Plate, 4 Holes FHF 905 Recon Plate, 5 Holes FHF 906 Recon Plate, 6 Holes FHF 907 Recon Plate, 7 Holes FHF 908 Recon Plate, 8 Holes FHF 909 Recon Plate, 9 Holes FHF 910 Recon Plate, 10 Holes FHF 912 Recon Plate, 12 Holes FHF 914 Recon Plate, 14 Holes FHF 924 Recon T-Plate, 4 Holes FHF 925 Recon T-Plate, 5 Holes FHF 926 Recon T-Plate, 6 Holes FHF 927 Recon T-Plate, 7 Holes FHF 928 Recon T-Plate, 8 Holes FHF 929 Recon T-Plate, 9 Holes FRP 504 Revision Osteo Plate, 4 Holes FRP 505 Revision Osteo Plate, 5 Holes FRP 506 Revision Osteo Plate, 6 Holes FRP 507 Revision Osteo Plate, 7 Holes FRP 508 Revision Osteo Plate, 8 Holes FRP 510 Revision Osteo Plate, 10 Holes FRP 512 Revision Osteo Plate, 12 Holes FRP 515 Revision Osteo Plate, 15 Holes FRP 520 Medium Low Profile Osteo Plate, 4 Holes FRP 521 Medium Low Profile Osteo Plate, 5 Holes FRP 522 Medium Low Profile Osteo Plate, 6 Holes FRP 523 Medium Low Profile Osteo Plate, 7 Holes FRP 524 Medium Low Profile Osteo Plate, 8 Holes FRP 525 Medium Low Profile Osteo Plate, 10 Holes FRP 526 Medium Low Profile Osteo Plate, 12 Holes FRP 527 Medium Low Profile Osteo Plate, 15 Holes FRP 530 Osteo Plate, 4 Holes FRP 531 Osteo Plate, 5 Holes FRP 532 Osteo Plate, 6 Holes FRP 533 Osteo Plate, 7 Holes FRP 534 Osteo Plate, 8 Holes FRP 535 Osteo Plate, 10 Holes FRP 536 Osteo Plate, 12 Holes FRP 537 Osteo Plate, 15 Holes FRP 604 Revision Osteo Plate, Wide, 4 Holes FRP 605 Revision Osteo Plate, Wide, 5 Holes FRP 606 Revision Osteo Plate, Wide, 6 Holes FRP 607 Revision Osteo Plate, Wide, 7 Holes FRP 608 Revision Osteo Plate, Wide, 8 Holes FRP 610 Revision Osteo Plate, Wide, 10 Holes FRP 612 Revision Osteo Plate, Wide, 12 Holes FRP 615 Revision Osteo Plate, Wide, 15 Holes FRP 704 Low Profile Recon Plate, 4 Holes FRP 705 Low Profile Recon Plate, 5 Holes


FRP 706 Low Profile Recon Plate, 6 Holes FRP 707 Low Profile Recon Plate, 7 Holes FRP 708 Low Profile Recon Plate, 8 Holes FRP 709 Low Profile Recon Plate, 9 Holes FRP 710 Low Profile Recon Plate, 10 Holes FRP 712 Low Profile Recon Plate, 12 Holes FRP 714 Low Profile Recon Plate, 14 Holes FRP 716 Low Profile Recon Plate, 16 Holes FRP 904 Recon Plate, 4 Holes FRP 905 Recon Plate, 5 Holes FRP 906 Recon Plate, 6 Holes FRP 907 Recon Plate, 7 Holes FRP 908 Recon Plate, 8 Holes FRP 909 Recon Plate, 9 Holes FRP 910 Recon Plate, 10 Holes FRP 911 Recon Plate, 11 Holes FRP 912 Recon Plate, 12 Holes FRP 914 Recon Plate, 14 Holes FRP 915 Recon Plate, 15 Holes FRP 916 Recon Plate, 16 Holes FRP 918 Recon Plate, 18 Holes FRP 920 Recon Plate, 20 Holes FRP 930 Revision Recon Plate, 5 Holes FRP 931 Revision Recon Plate, 6 Holes FRP 932 Revision Recon Plate, 7 Holes FRP 933 Revision Recon Plate, 8 Holes FRP 934 Revision Recon Plate, 8 Holes FRP 935 Revision Recon Plate, 9 Holes

37

continued

Cannulated & Headless Compression ScrewsPARTIALLY THREADED


CSP 010 Partially Threaded D:2.0mm x L:10.0mm CSP 012 Partially Threaded D:2.0mm x L:12.0mm CSP 014 Partially Threaded D:2.0mm x L:14.0mm CSP 015 Partially Threaded D:2.0mm x L:15.0mm CSP 016 Partially Threaded D:2.0mm x L:16.0mm CSP 018 Partially Threaded D:2.0mm x L:18.0mm CSP 020 Partially Threaded D:2.0mm x L:20.0mm CSP 022 Partially Threaded D:2.0mm x L:22.0mm CSP 024 Partially Threaded D:2.0mm x L:24.0mm CSP 110 Partially Threaded D:2.4mm x L:10.0mm CSP 112 Partially Threaded D:2.4mm x L:12.0mm CSP 114 Partially Threaded D:2.4mm x L:14.0mm CSP 115 Partially Threaded D:2.4mm x L:15.0mmCSP 116 Partially Threaded D:2.4mm x L:16.0mm CSP 118 Partially Threaded D:2.4mm x L:18.0mm CSP 120 Partially Threaded D:2.4mm x L:20.0mm CSP 122 Partially Threaded D:2.4mm x L:22.0mm CSP 124 Partially Threaded D:2.4mm x L:24.0mm CSP 126 Partially Threaded D:2.4mm x L:26.0mm CSP 128 Partially Threaded D:2.4mm x L:28.0mm CSP 130 Partially Threaded D:2.4mm x L:30.0mm CSP 210 Partially Threaded D:3.0mm x L:10.0mmCSP 212 Partially Threaded D:3.0mm x L:12.0mmCSP 214 Partially Threaded D:3.0mm x L:14.0mmCSP 216 Partially Threaded D:3.0mm x L:16.0mmCSP 218 Partially Threaded D:3.0mm x L:18.0mmCSP 220 Partially Threaded D:3.0mm x L:20.0mm CSP 222 Partially Threaded D:3.0mm x L:22.0mmCSP 224 Partially Threaded D:3.0mm x L:24.0mmCSP 226 Partially Threaded D:3.0mm x L:26.0mmCSP 228 Partially Threaded D:3.0mm x L:28.0mmCSP 230 Partially Threaded D:3.0mm x L:30.0mm CSP 232 Partially Threaded D:3.0mm x L:32.0mmCSP 234 Partially Threaded D:3.0mm x L:34.0mmCSP 320 Partially Threaded D:3.5mm x L:20.0mm CSP 322 Partially Threaded D:3.5mm x L:22.0mm CSP 324 Partially Threaded D:3.5mm x L:24.0mm CSP 325 Partially Threaded D:3.5mm x L:25.0mm CSP 326 Partially Threaded D:3.5mm x L:26.0mm CSP 328 Partially Threaded D:3.5mm x L:28.0mm CSP 330 Partially Threaded D:3.5mm x L:30.0mm CSP 332 Partially Threaded D:3.5mm x L:32.0mm CSP 334 Partially Threaded D:3.5mm x L:34.0mm CSP 336 Partially Threaded D:3.5mm x L:36.0mm CSP 338 Partially Threaded D:3.5mm x L:38.0mm CSP 340 Partially Threaded D:3.5mm x L:40.0mm CSP 345 Partially Threaded D:3.5mm x L:45.0mm CNP 416 Partially Threaded D:4.0mm x L:16.0mmCNP 418 Partially Threaded D:4.0mm x L:18.0mmCNP 420 Partially Threaded D:4.0mm x L:20.0mmCNP 422 Partially Threaded D:4.0mm x L:22.0mmCNP 424 Partially Threaded D:4.0mm x L:24.0mmCNP 426 Partially Threaded D:4.0mm x L:26.0mmCNP 428 Partially Threaded D:4.0mm x L:28.0mmCNP 430 Partially Threaded D:4.0mm x L:30.0mmCNP 432 Partially Threaded D:4.0mm x L:32.0mmCNP 434 Partially Threaded D:4.0mm x L:34.0mmCNP 436 Partially Threaded D:4.0mm x L:36.0mmCNP 438 Partially Threaded D:4.0mm x L:38.0mmCNP 440 Partially Threaded D:4.0mm x L:40.0mmCNP 445 Partially Threaded D:4.0mm x L:45.0mmCNP 450 Partially Threaded D:4.0mm x L:50.0mmCNP 455 Partially Threaded D:4.0mm x L:55.0mmCNP 460 Partially Threaded D:4.0mm x L:60.0mmCNP 530 Partially Threaded D:4.5mm x L:30.0mm CNP 535 Partially Threaded D:4.5mm x L:35.0mm CNP 540 Partially Threaded D:4.5mm x L:40.0mm CNP 545 Partially Threaded D:4.5mm x L:45.0mm


CNP 550 Partially Threaded D:4.5mm x L:50.0mm CNP 555 Partially Threaded D:4.5mm x L:55.0mm CNP 560 Partially Threaded D:4.5mm x L:60.0mm CNP 565 Partially Threaded D:4.5mm x L:65.0mm CNP 570 Partially Threaded D:4.5mm x L:70.0mm CSP 630 Partially Threaded D:5.5mm x L:30.0mm CSP 635 Partially Threaded D:5.5mm x L:35.0mm CSP 640 Partially Threaded D:5.5mm x L:40.0mm CSP 645 Partially Threaded D:5.5mm x L:45.0mm CSP 650 Partially Threaded D:5.5mm x L:50.0mm CSP 655 Partially Threaded D:5.5mm x L:55.0mm CSP 660 Partially Threaded D:5.5mm x L:60.0mm CSP 665 Partially Threaded D:5.5mm x L:65.0mm CSP 670 Partially Threaded D:5.5mm x L:70.0mm CSP 740 Partially Threaded D:6.5mm x L:40.0mm CSP 745 Partially Threaded D:6.5mm x L:45.0mm CSP 750 Partially Threaded D:6.5mm x L:50.0mm CSP 755 Partially Threaded D:6.5mm x L:55.0mm CSP 760 Partially Threaded D:6.5mm x L:60.0mm CSP 765 Partially Threaded D:6.5mm x L:65.0mm CSP 770 Partially Threaded D:6.5mm x L:70.0mm CSP 775 Partially Threaded D:6.5mm x L:75.0mm CSP 780 Partially Threaded D:6.5mm x L:80.0mm CSP 785 Partially Threaded D:6.5mm x L:85.0mm CSP 790 Partially Threaded D:6.5mm x L:90.0mm CSP 795 Partially Threaded D:6.5mm x L:95.0mm CSP 796 Partially Threaded D:6.5mm x L:100.0mm CSP 797 Partially Threaded D:6.5mm x L:110.0mm CSP 798 Partially Threaded D:6.5mm x L:120.0mm CSP 850 Partially Threaded D:7.3mm x L:50.0mm CSP 855 Partially Threaded D:7.3mm x L:55.0mm CSP 860 Partially Threaded D:7.3mm x L:60.0mm CSP 865 Partially Threaded D:7.3mm x L:65.0mm CSP 870 Partially Threaded D:7.3mm x L:70.0mm CSP 875 Partially Threaded D:7.3mm x L:75.0mm CSP 880 Partially Threaded D:7.3mm x L:80.0mm CSP 885 Partially Threaded D:7.3mm x L:85.0mm CSP 890 Partially Threaded D:7.3mm x L:90.0mm CSP 895 Partially Threaded D:7.3mm x L:95.0mm CSP 896 Partially Threaded D:7.3mm x L:100.0mm CSP 897 Partially Threaded D:7.3mm x L:110.0mm CSP 898 Partially Threaded D:7.3mm x L:120.0mm

PARTIALLY THREADED (CONTINUED)


CSF 215 Fully Threaded D:3.0mm x L:15.0mm CSF 220 Fully Threaded D:3.0mm x L:20.0mm CSF 225 Fully Threaded D:3.0mm x L:25.0mm CSF 230 Fully Threaded D:3.0mm x L:30.0mm CSF 235 Fully Threaded D:3.0mm x L:35.0mm CSF 320 Fully Threaded D:3.5mm x L:20.0mm CSF 325 Fully Threaded D:3.5mm x L:25.0mm CSF 330 Fully Threaded D:3.5mm x L:30.0mm CSF 335 Fully Threaded D:3.5mm x L:35.0mm CSF 340 Fully Threaded D:3.5mm x L:40.0mm CNF 530 Fully Threaded D:4.5mm x L:30.0mm CNF 535 Fully Threaded D:4.5mm x L:35.0mm CNF 540 Fully Threaded D:4.5mm x L:40.0mm CNF 545 Fully Threaded D:4.5mm x L:45.0mm CNF 550 Fully Threaded D:4.5mm x L:50.0mm CNF 555 Fully Threaded D:4.5mm x L:55.0mm CNF 560 Fully Threaded D:4.5mm x L:60.0mm CNF 565 Fully Threaded D:4.5mm x L:65.0mm CNF 570 Fully Threaded D:4.5mm x L:70.0mm

FULLY THREADED


FULLY THREADED (CONTINUED)


CSF 740 Fully Threaded D:6.5mm x L:40.0mm CSF 745 Fully Threaded D:6.5mm x L:45.0mm CSF 750 Fully Threaded D:6.5mm x L:50.0mm CSF 755 Fully Threaded D:6.5mm x L:55.0mm CSF 760 Fully Threaded D:6.5mm x L:60.0mm CSF 765 Fully Threaded D:6.5mm x L:65.0mm CSF 770 Fully Threaded D:6.5mm x L:70.0mm CSF 775 Fully Threaded D:6.5mm x L:75.0mm CSF 780 Fully Threaded D:6.5mm x L:80.0mm


HCS 110 Headless Compression Screw D:2.4mm x L:10mm HCS 112 Headless Compression Screw D:2.4mm x L:12mm HCS 114 Headless Compression Screw D:2.4mm x L:14mm HCS 116 Headless Compression Screw D:2.4mm x L:16mm HCS 118 Headless Compression Screw D:2.4mm x L:18mm HCS 120 Headless Compression Screw D:2.4mm x L:20mm HCS 122 Headless Compression Screw D:2.4mm x L:22mm HCS 124 Headless Compression Screw D:2.4mm x L:24mm HCS 126 Headless Compression Screw D:2.4mm x L:26mm HCS 128 Headless Compression Screw D:2.4mm x L:28mm HCS 132 Headless Compression Screw D:2.4mm x L:32mm HCS 136 Headless Compression Screw D:2.4mm x L:36mm HCS 140 Headless Compression Screw D:2.4mm x L:40mm HCS 220 Headless Compression Screw D:3.0mm x L:20mm HCS 222 Headless Compression Screw D:3.0mm x L:22mm HCS 224 Headless Compression Screw D:3.0mm x L:24mm HCS 226 Headless Compression Screw D:3.0mm x L:26mm HCS 228 Headless Compression Screw D:3.0mm x L:28mm HCS 230 Headless Compression Screw D:3.0mm x L:30mm HCS 232 Headless Compression Screw D:3.0mm x L:32mm HCS 234 Headless Compression Screw D:3.0mm x L:34mm HCS 236 Headless Compression Screw D:3.0mm x L:36mm HCS 238 Headless Compression Screw D:3.0mm x L:38mm HCS 240 Headless Compression Screw D:3.0mm x L:40mm HCS 245 Headless Compression Screw D:3.0mm x L:45mm HCS 250 Headless Compression Screw D:3.0mm x L:50mm HCS 424 Headless Compression Screw D:4.0mm x L:24mm HCS 426 Headless Compression Screw D:4.0mm x L:26mm HCS 428 Headless Compression Screw D:4.0mm x L:28mm HCS 430 Headless Compression Screw D:4.0mm x L:30mm HCS 432 Headless Compression Screw D:4.0mm x L:32mm HCS 434 Headless Compression Screw D:4.0mm x L:34mm HCS 436 Headless Compression Screw D:4.0mm x L:36mm HCS 438 Headless Compression Screw D:4.0mm x L:38mm HCS 440 Headless Compression Screw D:4.0mm x L:40mm HCS 445 Headless Compression Screw D:4.0mm x L:45mm HCS 450 Headless Compression Screw D:4.0mm x L:50mm HCS 455 Headless Compression Screw D:4.0mm x L:55mm HCS 460 Headless Compression Screw D:4.0mm x L:60mm

HEADLESS COMPRESSION



OSW 100 Screw Washer for 3.5mm/4.0mm/4.5mm ScrewsOSW 200 Screw Washer for 5.5mm/6.5mm/7.3mm Screws

Washers


FHF 206 Variable Angle Locking, D:1.5mm x L:6.0mm FHF 207 Variable Angle Locking, D:1.5mm x L:7.0mmFHF 208 Variable Angle Locking, D:1.5mm x L:8.0mm FHF 209 Variable Angle Locking, D:1.5mm x L:9.0mmFHF 210 Variable Angle Locking, D:1.5mm x L:10.0mm FHF 211 Variable Angle Locking, D:1.5mm x L:11.0mmFHF 212 Variable Angle Locking, D:1.5mm x L:12.0mm FHF 213 Variable Angle Locking, D:1.5mm x L:13.0mmFHF 214 Variable Angle Locking, D:1.5mm x L:14.0mm FHF 215 Variable Angle Locking, D:1.5mm x L:15.0mmFHF 216 Variable Angle Locking, D:1.5mm x L:16.0mm FHF 218 Variable Angle Locking, D:1.5mm x L:18.0mm FHF 220 Variable Angle Locking, D:1.5mm x L:20.0mm FHF 006 Variable Angle Locking, D:2.0mm x L:6.0mm FHF 007 Variable Angle Locking, D:2.0mm x L:7.0mmFHF 008 Variable Angle Locking, D:2.0mm x L:8.0mm FHF 009 Variable Angle Locking, D:2.0mm x L:9.0mmFHF 010 Variable Angle Locking, D:2.0mm x L:10.0mm FHF 011 Variable Angle Locking, D:2.0mm x L:11.0mmFHF 012 Variable Angle Locking, D:2.0mm x L:12.0mm FHF 013 Variable Angle Locking, D:2.0mm x L:13.0mmFHF 014 Variable Angle Locking, D:2.0mm x L:14.0mm FHF 015 Variable Angle Locking, D:2.0mm x L:15.0mmFHF 016 Variable Angle Locking, D:2.0mm x L:16.0mm FHF 018 Variable Angle Locking, D:2.0mm x L:18.0mm FHF 020 Variable Angle Locking, D:2.0mm x L:20.0mm FHF 022 Variable Angle Locking, D:2.0mm x L:22.0mm FHF 024 Variable Angle Locking, D:2.0mm x L:24.0mm FHF 026 Variable Angle Locking, D:2.0mm x L:26.0mm FHF 028 Variable Angle Locking, D:2.0mm x L:28.0mm FHF 030 Variable Angle Locking, D:2.0mm x L:30.0mm FHF 106 Variable Angle Locking, D:2.4mm x L:6.0mm FHF 108 Variable Angle Locking, D:2.4mm x L:8.0mm FHF 110 Variable Angle Locking, D:2.4mm x L:10.0mm FHF 112 Variable Angle Locking, D:2.4mm x L:12.0mm FHF 114 Variable Angle Locking, D:2.4mm x L:14.0mm FHF 116 Variable Angle Locking, D:2.4mm x L:16.0mm FHF 118 Variable Angle Locking, D:2.4mm x L:18.0mm FHF 120 Variable Angle Locking, D:2.4mm x L:20.0mm FHF 122 Variable Angle Locking, D:2.4mm x L:22.0mm FHF 124 Variable Angle Locking, D:2.4mm x L:24.0mm FHF 126 Variable Angle Locking, D:2.4mm x L:26.0mm FHF 128 Variable Angle Locking, D:2.4mm x L:28.0mm FHF 130 Variable Angle Locking, D:2.4mm x L:30.0mm FRP 208 Variable Angle Locking, D:2.7mm x L:8.0mm FRP 210 Variable Angle Locking, D:2.7mm x L:10.0mm FRP 212 Variable Angle Locking, D:2.7mm x L:12.0mm FRP 214 Variable Angle Locking, D:2.7mm x L:14.0mm FRP 216 Variable Angle Locking, D:2.7mm x L:16.0mm FRP 218 Variable Angle Locking, D:2.7mm x L:18.0mm FRP 220 Variable Angle Locking, D:2.7mm x L:20.0mm FRP 222 Variable Angle Locking, D:2.7mm x L:22.0mm FRP 224 Variable Angle Locking, D:2.7mm x L:24.0mm FRP 226 Variable Angle Locking, D:2.7mm x L:26.0mm FRP 228 Variable Angle Locking, D:2.7mm x L:28.0mm FRP 230 Variable Angle Locking, D:2.7mm x L:30.0mm FRP 232 Variable Angle Locking, D:2.7mm x L:32.0mm FRP 234 Variable Angle Locking, D:2.7mm x L:34.0mm FRP 236 Variable Angle Locking, D:2.7mm x L:36.0mm FRP 238 Variable Angle Locking, D:2.7mm x L:38.0mm FRP 240 Variable Angle Locking, D:2.7mm x L:40.0mm FRP 245 Variable Angle Locking, D:2.7mm x L:45.0mm FRP 250 Variable Angle Locking, D:2.7mm x L:50.0mm FRP 255 Variable Angle Locking, D:2.7mm x L:55.0mm FRP 260 Variable Angle Locking, D:2.7mm x L:60.0mm FLP 208 Variable Angle Locking, Low Profile, D:2.7mm x L:8.0mm

Plating ScrewsLOCKING

39


FLP 210 Variable Angle Locking, Low Profile, D:2.7mm x L:10.0mm FLP 212 Variable Angle Locking, Low Profile, D:2.7mm x L:12.0mm FLP 214 Variable Angle Locking, Low Profile, D:2.7mm x L:14.0mm FLP 216 Variable Angle Locking, Low Profile, D:2.7mm x L:16.0mm FLP 218 Variable Angle Locking, Low Profile, D:2.7mm x L:18.0mm FLP 220 Variable Angle Locking, Low Profile, D:2.7mm x L:20.0mm FLP 222 Variable Angle Locking, Low Profile, D:2.7mm x L:22.0mm FLP 224 Variable Angle Locking, Low Profile, D:2.7mm x L:24.0mm FLP 226 Variable Angle Locking, Low Profile, D:2.7mm x L:26.0mm FLP 228 Variable Angle Locking, Low Profile, D:2.7mm x L:28.0mm FLP 230 Variable Angle Locking, Low Profile, D:2.7mm x L:30.0mm FLP 232 Variable Angle Locking, Low Profile, D:2.7mm x L:32.0mm FLP 234 Variable Angle Locking, Low Profile, D:2.7mm x L:34.0mm FLP 236 Variable Angle Locking, Low Profile, D:2.7mm x L:36.0mm FLP 238 Variable Angle Locking, Low Profile, D:2.7mm x L:38.0mm FLP 240 Variable Angle Locking, Low Profile, D:2.7mm x L:40.0mm FLP 245 Variable Angle Locking, Low Profile, D:2.7mm x L:45.0mm FLP 250 Variable Angle Locking, Low Profile, D:2.7mm x L:50.0mm FLP 255 Variable Angle Locking, Low Profile, D:2.7mm x L:55.0mm FLP 260 Variable Angle Locking, Low Profile, D:2.7mm x L:60.0mm FLP 308 Variable Angle Locking, D:3.0mm x L:8.0mm FLP 310 Variable Angle Locking, D:3.0mm x L:10.0mm FLP 312 Variable Angle Locking, D:3.0mm x L:12.0mm FLP 314 Variable Angle Locking, D:3.0mm x L:14.0mm FLP 316 Variable Angle Locking, D:3.0mm x L:16.0mm FLP 318 Variable Angle Locking, D:3.0mm x L:18.0mm FLP 320 Variable Angle Locking, D:3.0mm x L:20.0mm FLP 322 Variable Angle Locking, D:3.0mm x L:22.0mm FLP 324 Variable Angle Locking, D:3.0mm x L:24.0mm FLP 326 Variable Angle Locking, D:3.0mm x L:26.0mm FLP 328 Variable Angle Locking, D:3.0mm x L:28.0mm FLP 330 Variable Angle Locking, D:3.0mm x L:30.0mm FRP 308 Variable Angle Locking, D:3.5mm x L:8.0mm FRP 310 Variable Angle Locking, D:3.5mm x L:10.0mm FRP 312 Variable Angle Locking, D:3.5mm x L:12.0mm FRP 314 Variable Angle Locking, D:3.5mm x L:14.0mm FRP 316 Variable Angle Locking, D:3.5mm x L:16.0mm FRP 318 Variable Angle Locking, D:3.5mm x L:18.0mm FRP 320 Variable Angle Locking, D:3.5mm x L:20.0mm FRP 322 Variable Angle Locking, D:3.5mm x L:22.0mm FRP 324 Variable Angle Locking, D:3.5mm x L:24.0mm FRP 326 Variable Angle Locking, D:3.5mm x L:26.0mm FRP 328 Variable Angle Locking, D:3.5mm x L:28.0mm FRP 330 Variable Angle Locking, D:3.5mm x L:30.0mm FRP 332 Variable Angle Locking, D:3.5mm x L:32.0mm FRP 334 Variable Angle Locking, D:3.5mm x L:34.0mm FRP 336 Variable Angle Locking, D:3.5mm x L:36.0mm FRP 338 Variable Angle Locking, D:3.5mm x L:38.0mm FRP 340 Variable Angle Locking, D:3.5mm x L:40.0mm FRP 345 Variable Angle Locking, D:3.5mm x L:45.0mm FRP 350 Variable Angle Locking, D:3.5mm x L:50.0mm FRP 355 Variable Angle Locking, D:3.5mm x L:55.0mm FRP 360 Variable Angle Locking, D:3.5mm x L:60.0mm

LOCKING (CONTINUED)

continued


FDR 116 Variable Angle Locking, D:1.8mm x L: 16.0mmFDR 118 Variable Angle Locking, D:1.8mm x L: 18.0mmFDR 120 Variable Angle Locking, D:1.8mm x L: 20.0mmFDR 122 Variable Angle Locking, D:1.8mm x L: 22.0mm

LOCKING PEGS


FBS 506 Variable Angle Non-Locking, D:1.5mm x L:6.0mm FBS 507 Variable Angle Non-Locking, D:1.5mm x L:7.0mmFBS 508 Variable Angle Non-Locking, D:1.5mm x L:8.0mm FBS 509 Variable Angle Non-Locking, D:1.5mm x L:9.0mmFBS 510 Variable Angle Non-Locking, D:1.5mm x L:10.0mm FBS 511 Variable Angle Non-Locking, D:1.5mm x L:11.0mmFBS 512 Variable Angle Non-Locking, D:1.5mm x L:12.0mm FBS 513 Variable Angle Non-Locking, D:1.5mm x L:13.0mmFBS 514 Variable Angle Non-Locking, D:1.5mm x L:14.0mm FBS 515 Variable Angle Non-Locking, D:1.5mm x L:15.0mmFBS 516 Variable Angle Non-Locking, D:1.5mm x L:16.0mm FBS 518 Variable Angle Non-Locking, D:1.5mm x L:18.0mm FBS 520 Variable Angle Non-Locking, D:1.5mm x L:20.0mm FBS 006 Variable Angle Non-Locking, D:2.0mm x L:6.0mm FBS 007 Variable Angle Non-Locking, D:2.0mm x L:7.0mmFBS 008 Variable Angle Non-Locking, D:2.0mm x L:8.0mm FBS 009 Variable Angle Non-Locking, D:2.0mm x L:9.0mmFBS 010 Variable Angle Non-Locking, D:2.0mm x L:10.0mm FBS 011 Variable Angle Non-Locking, D:2.0mm x L:11.0mmFBS 012 Variable Angle Non-Locking, D:2.0mm x L:12.0mm FBS 013 Variable Angle Non-Locking, D:2.0mm x L:13.0mmFBS 014 Variable Angle Non-Locking, D:2.0mm x L:14.0mm FBS 015 Variable Angle Non-Locking, D:2.0mm x L:15.0mmFBS 016 Variable Angle Non-Locking, D:2.0mm x L:16.0mm FBS 018 Variable Angle Non-Locking, D:2.0mm x L:18.0mm FBS 020 Variable Angle Non-Locking, D:2.0mm x L:20.0mm FBS 022 Variable Angle Non-Locking, D:2.0mm x L:22.0mm FBS 024 Variable Angle Non-Locking, D:2.0mm x L:24.0mm FBS 026 Variable Angle Non-Locking, D:2.0mm x L:26.0mm FBS 028 Variable Angle Non-Locking, D:2.0mm x L:28.0mm FBS 030 Variable Angle Non-Locking, D:2.0mm x L:30.0mm FBS 106 Variable Angle Non-Locking, D:2.4mm x L:6.0mm FBS 108 Variable Angle Non-Locking, D:2.4mm x L:8.0mm FBS 110 Variable Angle Non-Locking, D:2.4mm x L:10.0mm FBS 112 Variable Angle Non-Locking, D:2.4mm x L:12.0mm FBS 114 Variable Angle Non-Locking, D:2.4mm x L:14.0mm FBS 116 Variable Angle Non-Locking, D:2.4mm x L:16.0mm FBS 118 Variable Angle Non-Locking, D:2.4mm x L:18.0mm FBS 120 Variable Angle Non-Locking, D:2.4mm x L:20.0mm FBS 122 Variable Angle Non-Locking, D:2.4mm x L:22.0mm FBS 124 Variable Angle Non-Locking, D:2.4mm x L:24.0mm FBS 126 Variable Angle Non-Locking, D:2.4mm x L:26.0mm FBS 128 Variable Angle Non-Locking, D:2.4mm x L:28.0mm FBS 130 Variable Angle Non-Locking, D:2.4mm x L:30.0mm FBS 210 Variable Angle Non-Locking, D:2.7mm x L:10.0mm FBS 212 Variable Angle Non-Locking, D:2.7mm x L:12.0mm FBS 214 Variable Angle Non-Locking, D:2.7mm x L:14.0mm FBS 216 Variable Angle Non-Locking, D:2.7mm x L:16.0mm FBS 218 Variable Angle Non-Locking, D:2.7mm x L:18.0mm FBS 220 Variable Angle Non-Locking, D:2.7mm x L:20.0mm FBS 222 Variable Angle Non-Locking, D:2.7mm x L:22.0mm FBS 224 Variable Angle Non-Locking, D:2.7mm x L:24.0mm FBS 226 Variable Angle Non-Locking, D:2.7mm x L:26.0mm FBS 228 Variable Angle Non-Locking, D:2.7mm x L:28.0mm FBS 230 Variable Angle Non-Locking, D:2.7mm x L:30.0mm FBS 232 Variable Angle Non-Locking, D:2.7mm x L:32.0mm FBS 234 Variable Angle Non-Locking, D:2.7mm x L:34.0mm FBS 236 Variable Angle Non-Locking, D:2.7mm x L:36.0mm FBS 238 Variable Angle Non-Locking, D:2.7mm x L:38.0mm FBS 240 Variable Angle Non-Locking, D:2.7mm x L:40.0mm FBS 245 Variable Angle Non-Locking, D:2.7mm x L:45.0mm FBS 250 Variable Angle Non-Locking, D:2.7mm x L:50.0mm FBS 255 Variable Angle Non-Locking, D:2.7mm x L:55.0mm FBS 260 Variable Angle Non-Locking, D:2.7mm x L:60.0mm FLS 310 Variable Angle Non-Locking, D:3.0mm x L:10.0mm FLS 312 Variable Angle Non-Locking, D:3.0mm x L:12.0mm FLS 314 Variable Angle Non-Locking, D:3.0mm x L:14.0mm FLS 316 Variable Angle Non-Locking, D:3.0mm x L:16.0mm

NON-LOCKING


40

continued


FLS 318 Variable Angle Non-Locking, D:3.0mm x L:18.0mm FLS 320 Variable Angle Non-Locking, D:3.0mm x L:20.0mm FLS 322 Variable Angle Non-Locking, D:3.0mm x L:22.0mm FLS 324 Variable Angle Non-Locking, D:3.0mm x L:24.0mm FLS 326 Variable Angle Non-Locking, D:3.0mm x L:26.0mm FLS 328 Variable Angle Non-Locking, D:3.0mm x L:28.0mm FLS 330 Variable Angle Non-Locking, D:3.0mm x L:30.0mm FBS 308 Variable Angle Non-Locking, D:3.5mm x L:8.0mmFBS 310 Variable Angle Non-Locking, D:3.5mm x L:10.0mm FBS 312 Variable Angle Non-Locking, D:3.5mm x L:12.0mm FBS 314 Variable Angle Non-Locking, D:3.5mm x L:14.0mm FBS 316 Variable Angle Non-Locking, D:3.5mm x L:16.0mm FBS 318 Variable Angle Non-Locking, D:3.5mm x L:18.0mm FBS 320 Variable Angle Non-Locking, D:3.5mm x L:20.0mm FBS 322 Variable Angle Non-Locking, D:3.5mm x L:22.0mm FBS 324 Variable Angle Non-Locking, D:3.5mm x L:24.0mm FBS 326 Variable Angle Non-Locking, D:3.5mm x L:26.0mm FBS 328 Variable Angle Non-Locking, D:3.5mm x L:28.0mm FBS 330 Variable Angle Non-Locking, D:3.5mm x L:30.0mm FBS 332 Variable Angle Non-Locking, D:3.5mm x L:32.0mm FBS 334 Variable Angle Non-Locking, D:3.5mm x L:34.0mm FBS 336 Variable Angle Non-Locking, D:3.5mm x L:36.0mm FBS 338 Variable Angle Non-Locking, D:3.5mm x L:38.0mm FBS 340 Variable Angle Non-Locking, D:3.5mm x L:40.0mm FBS 345 Variable Angle Non-Locking, D:3.5mm x L:45.0mm FBS 350 Variable Angle Non-Locking, D:3.5mm x L:50.0mm FBS 355 Variable Angle Non-Locking, D:3.5mm x L:55.0mm FBS 360 Variable Angle Non-Locking, D:3.5mm x L:60.0mm FBS 410 Variable Angle Non-Locking, D:4.0mm x L:10.0mm FBS 412 Variable Angle Non-Locking, D:4.0mm x L:12.0mm FBS 414 Variable Angle Non-Locking, D:4.0mm x L:14.0mm FBS 416 Variable Angle Non-Locking, D:4.0mm x L:16.0mm FBS 418 Variable Angle Non-Locking, D:4.0mm x L:18.0mm FBS 420 Variable Angle Non-Locking, D:4.0mm x L:20.0mm FBS 422 Variable Angle Non-Locking, D:4.0mm x L:22.0mm FBS 424 Variable Angle Non-Locking, D:4.0mm x L:24.0mm FBS 426 Variable Angle Non-Locking, D:4.0mm x L:26.0mm FBS 428 Variable Angle Non-Locking, D:4.0mm x L:28.0mm FBS 430 Variable Angle Non-Locking, D:4.0mm x L:30.0mm FBS 432 Variable Angle Non-Locking, D:4.0mm x L:32.0mm FBS 434 Variable Angle Non-Locking, D:4.0mm x L:34.0mm FBS 436 Variable Angle Non-Locking, D:4.0mm x L:36.0mm FBS 438 Variable Angle Non-Locking, D:4.0mm x L:38.0mm FBS 440 Variable Angle Non-Locking, D:4.0mm x L:40.0mm FBS 445 Variable Angle Non-Locking, D:4.0mm x L:45.0mm FBS 450 Variable Angle Non-Locking, D:4.0mm x L:50.0mm FBS 455 Variable Angle Non-Locking, D:4.0mm x L:55.0mm FBS 460 Variable Angle Non-Locking, D:4.0mm x L:60.0mm

NON-LOCKING (CONTINUED)


FCS 406 Variable Angle Compression, D:2.4mm x L:6.0mmFCS 408 Variable Angle Compression, D:2.4mm x L:8.0mmFCS 410 Variable Angle Compression, D:2.4mm x L:10.0mmFCS 412 Variable Angle Compression, D:2.4mm x L:12.0mmFCS 414 Variable Angle Compression, D:2.4mm x L:14.0mmFCS 416 Variable Angle Compression, D:2.4mm x L:16.0mmFCS 418 Variable Angle Compression, D:2.4mm x L:18.0mmFCS 420 Variable Angle Compression, D:2.4mm x L:20.0mmFCS 422 Variable Angle Compression, D:2.4mm x L:22.0mmFCS 210 Variable Angle Compression, D:2.7mm x L: 10mmFCS 212 Variable Angle Compression, D:2.7mm x L: 12mmFCS 214 Variable Angle Compression, D:2.7mm x L: 14mmFCS 216 Variable Angle Compression, D:2.7mm x L: 16mmFCS 218 Variable Angle Compression, D:2.7mm x L: 18mmFCS 220 Variable Angle Compression, D:2.7mm x L: 20mmFCS 222 Variable Angle Compression, D:2.7mm x L: 22mmFCS 224 Variable Angle Compression, D:2.7mm x L: 24mmFCS 226 Variable Angle Compression, D:2.7mm x L: 26mmFCS 510 Variable Angle Compression, D:3.5mm x L:10mmFCS 512 Variable Angle Compression, D:3.5mm x L:12mmFCS 514 Variable Angle Compression, D:3.5mm x L:14mmFCS 516 Variable Angle Compression, D:3.5mm x L:16mmFCS 518 Variable Angle Compression, D:3.5mm x L:18mmFCS 520 Variable Angle Compression, D:3.5mm x L:20mmFCS 522 Variable Angle Compression, D:3.5mm x L:22mmFCS 524 Variable Angle Compression, D:3.5mm x L:24mmFCS 526 Variable Angle Compression, D:3.5mm x L:26mmFCS 528 Variable Angle Compression, D:3.5mm x L:28mmFCS 530 Variable Angle Compression, D:3.5mm x L:30.0mmFCS 532 Variable Angle Compression, D:3.5mm x L:32.0mmFCS 534 Variable Angle Compression, D:3.5mm x L:34.0mmFCS 536 Variable Angle Compression, D:3.5mm x L:36.0mmFCS 538 Variable Angle Compression, D:3.5mm x L:38.0mmFCS 540 Variable Angle Compression, D:3.5mm x L:40.0mmFCS 610 Variable Angle Compression, D:4.0mm x L:10.0mmFCS 612 Variable Angle Compression, D:4.0mm x L:12.0mmFCS 614 Variable Angle Compression, D:4.0mm x L:14.0mmFCS 616 Variable Angle Compression, D:4.0mm x L:16.0mmFCS 618 Variable Angle Compression, D:4.0mm x L:18.0mmFCS 620 Variable Angle Compression, D:4.0mm x L:20.0mmFCS 622 Variable Angle Compression, D:4.0mm x L:22.0mmFCS 624 Variable Angle Compression, D:4.0mm x L:24.0mmFCS 626 Variable Angle Compression, D:4.0mm x L:26.0mmFCS 628 Variable Angle Compression, D:4.0mm x L:28.0mmFCS 630 Variable Angle Compression, D:4.0mm x L:30.0mmFCS 632 Variable Angle Compression, D:4.0mm x L:32.0mmFCS 634 Variable Angle Compression, D:4.0mm x L:34.0mmFCS 636 Variable Angle Compression, D:4.0mm x L:36.0mmFCS 638 Variable Angle Compression, D:4.0mm x L:38.0mmFCS 640 Variable Angle Compression, D:4.0mm x L:40.0mmFCS 645 Variable Angle Compression, D:4.0mm x L:45.0mmFCS 650 Variable Angle Compression, D:4.0mm x L:50.0mmFCS 655 Variable Angle Compression, D:4.0mm x L:55.0mmFCS 660 Variable Angle Compression, D:4.0mm x L:60.0mm

COMPRESSION


41


AGB 901 Cotton Trial, Tamp, 1.6mm x 140mm K-WireAGB 902 Evans Trial, Tamp, 1.6mm x 140mm K-WireEWK 201 Flower E-Kit AdvancedEWK 501 FlowerADCFIM 015 Power Driver G-Wire Kit, 3.0-4.5mm Cannulated ScrewsFIM 025 Power Driver G-Wire Kit, 5.5-7.3mm Cannulated ScrewsFIM 115 Large Bone K-Wire Kit, 1.4mm K-WiresGWK 100 Guide Wire Kit, 2.0/2.4GWK 108 CoCr Guidewires 0.8mm x 160mm (2)GWK 111 CoCr Guidewires 1.1mm x 160mm (2)GWK 120 Guidewires 2.0mm x 160mm (2)GWK 125 CoCr Guide Wires, 1.25mm x 160mm (2)GWK 200 Guide Wire Kit, 3.0/3.5/4.0/4.5GWK 300 Guide Wire Kit, 5.5/6.5/7.3KWK 001 K-Wire Kit, SmallKWK 102 K-Wires 1.4mm x 140mm (2)KWK 901 Distal Radius K-Wire Kit, AdvancedOWK 201 Olive Wire Kit, Medium, Advanced

Instrument Kits


DBK 015 1.1mm Drill Bit for 1.5mm ScrewsDBK 020 1.5mm Drill Bit for 2.0mm ScrewsDBK 024 1.8mm Drill Bit for 2.4mm ScrewsDBK 027 2.0mm Drill Bit for 2.7mm ScrewsDBK 030 2.0mm Drill Bit for 3.0mm ScrewsDBK 035 2.5mm Drill Bit for 3.5mm ScrewsDBK 040 3.0mm Drill Bit for 4.0mm ScrewsFDR 991 1.8mm Drill Bit for 2.4mm Screws - Distal RadiusLSK 015 1.5mm Drill Bit for 1.5mm Lag ScrewsLSK 020 2.0mm Drill Bit for 2.0mm Lag ScrewsLSK 030 3.0mm Drill Bit for 3.0mm Lag ScrewsLSK 035 3.5mm Drill Bit for 3.5mm Lag ScrewsLSK 040 4.0mm Drill Bit for 4.0mm Lag ScrewsLSK 124 2.5mm Drill Bit for 2.4mm Lag ScrewsLSK 127 2.7mm Drill Bit for 2.7mm Lag ScrewsCDB 017 1.7mm Cannulated Drill Bit for 2.0/2.4mm Cann. ScrewsCDB 020 2.0mm Cannulated Drill Bit for 3.0mm Cann. ScrewsCDB 024 2.4mm Cannulated Drill Bit for 3.5mm Cann. ScrewsCDB 026 2.6mm Cannulated Drill Bit for 4.0mm Cann. ScrewsCDB 030 3.0mm Cannulated Drill Bit for 4.5mm Cann. ScrewsCDB 040 4.0mm Cannulated Drill Bit for 5.5mm Cann. ScrewsCDB 050 5.0mm Cannulated Drill Bit for 6.5/7.3mm Cann. ScrewsCDB 065 6.5mm Cannulated Drill Bit for 6.5mm Full Cann. Screws

Drill Bit


CRK 018 Cannulated Reamer Kit, 18mmCRK 021 Cannulated Reamer Kit, 21mmCRK 024 Cannulated Reamer Kit, 24mmFIM 234 Plate Benders (M) (2)FIS 204 Four Corner Fusion ReamerFIS 231 Plate Benders (S) (2)

Ancillary Instruments


AGB 106 Bi-cortical Preshaped Evans Allograft, 6mmAGB 108 Bi-cortical Preshaped Evans Allograft, 8mmAGB 110 Bi-cortical Preshaped Evans Allograft, 10mmAGB 112 Bi-cortical Preshaped Evans Allograft, 12mmAGB 305 Bi-cortical Preshaped Cotton Allograft, 5mmAGB 306 Bi-cortical Preshaped Cotton Allograft, 6mAGB 307 Bi-cortical Preshaped Cotton Allograft, 7mmAGB 308 Bi-cortical Preshaped Cotton Allograft, 8mm


AGB 116 Evans Plate, 16mm, LeftAGB 216 Evans Plate, 16mm, RightAGB 120 Evans Plate, 20mm, LeftAGB 220 Evans Plate, 20mm, Right

FlowerGraft™


FBF 050 FlowerFlo 0.5ccFBF 100 FlowerFlo 1.0ccFBF 200 FlowerFlo 2.0ccFBP 204 FlowerPatch 2x4cmFBP 404 FlowerPatch 4x4cmFBP 406 FlowerPatch 4x6cmFBP 408 FlowerPatch 4x8cmFDM 204 FlowerDerm Allograft, Medium, 2x4cmFDM 404 FlowerDerm Allograft, Medium, 4x4cmFDM 408 FlowerDerm Allograft, Medium, 4x8cmFDM 412 FlowerDerm Allograft, Medium, 4x12cmFDM 555 FlowerDerm Allograft, Meshed, 5x5cmFDM 558 FlowerDerm Allograft, Meshed, 5x8cm

Flower Biologics


BICORTICAL, PRESHAPED ALLOGRAFTS

EVANS PLATES

www.flowerortho.com

DCR 2018-046

INDICATIONS FOR USE: The Flower Small and Medium Implants set is intended for use for internal fixation of fracturesand reconstruction of bones, including the scapula, olecranon, humerus, radius, ulna, pelvis, distal tibia, fibula, handand foot in adults and for long bone in adolescents (12-21) in whom the growth plates have fused. Examples of theseinternal fixations and reconstructions include compression fractures, intra-articular and extra-articular fractures,displaced fractures, osteotomies, non-unions and mal-unions. This system can be used for palmar, ventral, dorsal ororthogonal application.

INDICATIONS FOR USE: The Flower Ankle Plating Set is intended for use for fixation of the ankle in adults andadolescents (12-21) in whom the growth plates have fused, and particularly in osteopenic bone. Specifically,• Distal Medial and Lateral Tibia plates are intended for fixation of osteotomies, fractures, nonunions, and replantations

of bones and bone fragments of the diaphyseal and metaphyseal regions of the distal tibia.• Distal Tibia A-Plates are intended to buttress partial articular fractures and bone fragments of the distal tibia.• Straight and Distal Lateral Fibula Plates are intended for fixation of osteotomies, fractures, nonunions, malunions, and

replantations of bones and bone fragments of the diaphyseal and metaphyseal regions of the distal fibula.

INDICATIONS FOR USE: The Flower Orthopedics Flower Bone Screws set is intended to be used for the fixation of bonefractures, fusion of joints or bone reconstruction.

INDICATIONS FOR USE: The Flower Upper Extremity Plating Set is intended to be used for fixation of fractures, fusions,or osteotomies of the clavicle, humerus, radius and ulna.

©2018 Flower Orthopedics. All rights reserved. FlowerCube, FlowerCarriage, IndicationCube, IndicationCarriage, E-Kit, FlowerCart, FlowerGraft,Ready-For-Surgery, FlowerPatch, FlowerFlo, FlowerDerm and FlowerPot are trademarks of Flower Orthopedics. Please refer to package insert fordescription, indications, contraindications, warnings, precautions, and other important information.

FOC-Product Catalog-01-C

Product Catalog -...

Documents

Transcript of Product Catalog -...