PRODUCT Business Mission : “To Become Prominent Solution ...
Transcript of PRODUCT Business Mission : “To Become Prominent Solution ...
A N I S O 9 0 0 1 - 2 0 1 5 C O M PA N Y
PRODUCTRANGE
Business Mission : “To Become Prominent Solution Providerin the Field of Industrial Automation Products Globally.”
INJkon PLCs for Injection Molding Machine
HOTRkon Hot Runner Temperature Control System
PETkon PLCs for Pet Stretch Blow Molding Machine
PLC Models available to cater Various IMM needs.Robust ABS Molded AestheticsPLC models available with 4 line display to 12.1" Rich ColorGraphical Touch TFTs SD Card / Ethernet / USB Interface 1 Year Days Daily / 1 Year Hours Hourly Production Data Storage200 Nos of Alphanumeric Recipe (Mold Memory) Feather touch keys with LED indication for operations Easy interface with Compact Din rail mounted Combi Card
SROBO II Pick N Place Robot for IMMHuman SafetyFatigue less operation Minimum MaintenanceSmooth and Accurate OperationUser Friendly ProgramMinimum Human interventionPrecise Servo PositioningMinimum take out Time < 2 Sec.In Mold Labeling solution also AvailableSuitable up to 200 ton IMM
7” Touch PLC consoleFiring Angle Heat ControlSoft Start for HeaterHeater Current MeasurementAuto Switch to Manual if Sensor OpenProgrammable output per Zone for Heater / Blower / AlarmUnique Stand by ModeAvailable from 4 zone to 48 zone controlCastor wheel for easy movement.
Robust ABS Molded AestheticsIn built 20 DO (6 Infra Red Heater zone) / 11 DI / 8 THFiring Angle Heating Control up to 6 ZoneSuitable for semi auto pet stretch blow molding machine.
PLC Models available to cater Various Blow Molding Machine needs.Robust ABS Molded AestheticsPLC models available with 4 line displayPLC models available for Single as well as Double StationExtrusion blow molding machine.
BLOkon PLCs for Blow Molding Machine
SC 12.0 ACME Rainbow Vibrant
Applicable for INJkon SC 12 model
A N I S O 9 0 0 1 - 2 0 1 5 C O M PA N Y
DIGIServo AC Servo Motor with Drive
DIGIStep DC Stepper Drive
BAGkon PLC for Bag Making Machine
LABkon PLC for Sticker Labelling Machine
DIGIServo Models :
Torque
1.2 N-M
4.7 N-M
2.2 N-M
7.2 N-M
9.6 N-M
Power
450 W
1000 W
750 W
1500 W
2000 W
RPM
3000
2000
3000
2000
2000
Application Area :
Plastic
Pharma
Paper
Food
Chemical
MachineTools
Bag / Pouch Making, Slicing
Labeling, Filling, Indexing
Sticker Printing, Embossing, Cutting
Labeling, Filling, Indexing
Filling, Metering Pump, Servo Valve
Grinding, Drilling, Lathe, EngravingIndexing, Spark Erosion, X-Y table2/3/4 Axis Control, Hyd. Press etc.
Can Be interfaced with Stepper / Servo driveAuto Speed selection with bag sizeFacilitate with both Printed & Plain bagsSynchronization of main motor with bag pulling rollerUnwinder Motor control through 0-10 V Analog outputConveyor ControlSuitable for Bag making machines like side sealing,Bottom sealing, Standy, Zipper, Pouch Making etc.
Micro controller & DSP based efficient IGBT-IPM indigenous technologyEncoder - 2500 PPR
Operation : Full Step / Half StepModes : Pulse / Speed / Synchronization / Positioning
Can Be interfaced with Servo driveSoftware Calibration for length setting in mmFacilitate ON / OFF operation of conveyor motor from keypadSynchronization of Conveyor motor with label pulling roll
DIGIServo
Rainbow
VibrantGenius
DIGIStep Servo Motor
HOPkon Controller for Hopper Loader
DOZkon Controller for Dozing Application
Regrinding Material Addition facilityLine filter / Blower bypass FacilityIndividual Loader Enable / Disable FacilityFirst in First out (FIFO) method to operate loader sequentiallyIndividual Loader Error / Blower Trip ErrorDifferent Models : Single / Four / Multi Loader(Multi Loader - 8/12/1/20/24/28/32 loaders)
Solution for dozing master batches in Plastic Machineries.There are three Mode Timer Mode / Input Mode / Synchronization Mode (0-10VDC)Application Area :Injection Molding Machine / Blow Molding MachineExtrusion Machine/ Extruder Machine
A N I S O 9 0 0 1 - 2 0 1 5 C O M PA N Y
EXTRUDkon TT Thick Thin PLC for Pipe ExtruderPADkon PLC for Pad Printing MachineJDYEkon PLC for Jet Dyeing MachineAUTOBatch PLC for Batching System with Fail safe Valve
Our Other Product RangeWEITkon PLC for Weighing Scale with DAC SystemKILNkon PLC for KilnPROkon Time/Temperature based Profile GeneratorSCTC Multi Channel Temperature Controller
SCPL offers (1/2/3/4 Axis)Automation Systems for MachineTools industries..
Safety care sensing input provisionLocking - Dipping - Opening SequenceLocking / Holding / Cycle Timer
Real Time Clock / Password ProvisionTonnage Pressure ProvisionCuring / Cycle / Delay Timers
Pressure Care Sensing input provisionForward / Reverse Timer
Selectable Oscillation Mode :L-R / R-L / BothHydro-Mech. provision in Depth & Osc
Auto Dressing ModeBacklash CompensationSeparate Dressing ModePlunge / Oscillation ModeProgrammable feed rate for cut /Dwell / Spark OutManual Mode for feed & traverse axis
Backlash CompensationPlunge / Oscillation ModeProgrammable feed rate for cut /Dwell / Spark OutManual Mode for feed & traverse axis
PLC for Grinding MachineCylindrical Grinding MachineSurface Grinding MachineCenterless Grinding MachineFace Grinding Machine
PLC for Milling Machine
PLC for Tapping Machine
PLC for Hydraulic Press
PLC for Scrap Belling M/c
PLC for Lathe M/c
PLC for Milling Machine PLC for Grinding Machine
PLC for Tapping Machine
PLC for Hydraulic Press PLC for Scrap Belling M/c
PLC for Lathe M/c
RTU Remote Terminal Unit
(IEC 104 Protocol)RTU is a versatile solution for data acquisition,to transfer the data and to send SMS alerts, via GSM or Landline telephone, to remote locations,as well as to control various outputs from the remote locations. RTU can perform data acquisition using RS - 485 Serial Link with MODBUS protocolRTU can establish control using GSM or Landline telephone from remote place using Digital Outputs (upto 64) & Analog Outputs (upto 16)Incorporates Real Time Clock,Samples & Stores Data at periodic interval in the local non-volatile memory.The data/ status of various digital / analog inputs can be retrieved from remote place using GSM or Landline telephoneCan generate SMS Alerts pertaining to typical data or digital / analog inputs conditions to pre-defined mobile numbers Can also operate digital / analog outputs with SMS received from pre-defined mobile numbers"RTU follows wherever the GSM Network Follows"Full expert application programming supportCan be put into use for unlimited applications in industries, homes, commercial complexes, hospitals etc.
Ready Solutions for Remote
I/O Control & Data Aquisition using
our RTUs with GSM Connectivity
O�ce: 4th Floor, “Meghansh”, Gurukul Road, Memnagar, Ahmedabad-380052. Gujarat-INDIAPhone: 91 79 27411463 Email: [email protected]
Works: B-213/214, GIDC Electronics Estate, Sector-25, Gandhinagar-382044. Gujarat-INDIAEmail: [email protected]
A N I S O 9 0 0 1 - 2 0 1 5 C O M PA N Y
After Sales SupportPhone: +91 79 27411463Email: [email protected]
www.streamlinecontrols.com
Quality Policy : “Streamline Controls Pvt. Ltd. is in the business of designing and manufacturing of electronicproducts, used in automation of various industrial applications, to enhance productivity and quality.”
Our Established Network Mumbai Rajkot Vapi Chennai Hyderabad Delhi
We Appriciate Both OEM and Retrofitting Inquiries
Plant Automation ProcessDAQ : Data Acquisition System
PO / WO / Report
PO / WO /Report
Applica�onSo�ware built on
Visual Basic
PO / WO / Report
Automa�on & DAQ for Process n1
Automa�on & DAQ for Process n2
Automa�on & DAQ for Process n3
Automa�on & DAQ for Process n4
Automa�on & DAQ for Process nX
Automa�on & DAQ for Process n5
MechanicalSolu�on also
can be provided
Server/ERP
Dedicated Applica�onwith MS SQL database
Automation Solution we provide
PLCHMI
• 16 X 2 LCD Display• 20 x 4 LCD Display• 3.2” LCD Display• 5.7” Touch screen• 7.0” Touch screen••
10.2” Touch screen12.0” Touch screen
IO Drivers• Digital Inputs• Digital Outputs• Analog Inputs• Analog Outputs
Communica�on • EthernetDifferent
Interfacing Modes
• RS 232• RS 485• Modbus
Mo�on Drive
• DC Stepper Dive• AC Servo Drive
Automation for Plastic Molding IndustryRejec�on Wastage Runner Rejec�on Wastage Runner
Runner
Semi Finished
Track Trolly Track
PLC
Runner Rejec�on
Rejec�on Wastage
Semi Finished
QC OK
Trolly Track
Sto rage
Storage Rejec�on
Automated Mixer Trolly Automated Mixer Trolly
Online Stock
Mot
oriz
ed V
alve
Trolly TrackTrolly Track
Silo 5 Silo 6
Finishing RoomQC Check Solu�on
Grinder
Se mi Finished Semi Finished
Final Product Outward
Raw Material In ward
Online Stock
Trolly Load C ell
Si lo 3 Silo 4
Silo 7
Injec�on Molding Injec�on Molding
Silo 8
PP HDMaster Batch 1
Master Batch 2
Fi ller 1 Fi ller 2Master Batch 3
Master Batch 4
Silo 1 Silo 2
Replaces difficult / monotonous work- Adds Comfort, Safety & Convenience to the humanContributes green revolution - saves paper..
Automation for Abrasive Industry