PRODUCT ALUTEKU ANTIQUED GREEN COPPER · 2018-07-03 · ALUTEKU ANTIQUED GREEN COPPER PRODUCT...

PRODUCTALUTEKU ANTIQUED GREEN COPPER

PRODUCT

ALU

TEK

U |

RA

ME

AN

TIC

AT

O V

ERD

E

�

ALUTEKU ANTIQUED GREEN COPPER

PRODUCT

ALU

TEK

U |

RA

ME

AN

TIC

AT

O V

ERD

E

Special process with polyurethane coatings specifically designed to make the treated material similar to aged green copper. Aluminium substrate. The product is suit-able for outdoor applications (sheet metal work, panels,

etc.). Due to the presence of multi colour decoration, no delta E value can be indicated despite item complemen-tariness. PVDF Aluteku available upon request.

other colours available

This technical data sheet refers to aluminium substrate product version

TREATMENT2 stage degreasing + chrome-free passivation

TOP SIDEBASE COAT: 9-11 micron green pur INK: 1-2 micronTRANSPARENT TOP COAT: 9-11 micron super-PE

BACK SIDEBACK COAT: 4-6 micron or 14-16 micron monocouche

TECHNICAL SPECIFICATIONS

*according to substrate properties

UV RESISTANCE CATEGORY: RUV3

CORROSION RESISTANCE CATEGORY: RC3

REACTION TO FIRE CLASSIFICATION: A1 in accordance with

European standard EN 13501-1

ROHS COMPLIANT PAINT

TEST VALUE REFERENCE STANDARD

thickness 19/24 EN 13523-1 (ECCA T1)

gloss 5±3 EN 13523-2 (ECCA T2)

pencil hardness F-H EN 13523-4 (ECCA T4)

resistance to rapid deformation (impact test)

100% EN 13523-5 (ECCA T5)

adhesion after indentation (cupping test)

100% EN 13523-6 (ECCA T6)

adhesion after bending at 25°c 0T-1T* EN 13523-7 (ECCA T7)

resistance to cracking on bending (t-bend test) at 25°c

0T-2T* EN 13523-7 (ECCA T7)

solvent resistance (MEK rubbing test)

>100 EN 13523-11 (ECCA T11)

PRODUCTCORTEN

PRODUCT

CO

RT

EN

�

CORTEN

PRODUCT

CO

RT

EN

This process uses polyester coatings which give the treated material an appearance similar to corten steel. Real corten is a material of high architectural value. The surface warm oxidized hue offers several aesthetic so-lutions because of the unusual “elegance of the rust”, which gives the material an aged and antique appear-ance. Its main feature is its excellent resistance to rusting by atmospheric agents since its natural oxidation, which stops over time and does not extend to the interior,

forms a good protective patina. On the other hand the material dirties very easily and is not very malleable, so the solution proposed by Alusteel Coating is an excel-lent compromise between aesthetic result and practi-cality. The product is suitable for outdoor applications (sheet metal work, panels, etc.). Due to the presence of multi colour decoration, no delta E value can be indi-cated despite item complementariness. PVDF Corten available upon request.




TOP SIDEBASE COAT: 14-16 micron brown pur INK: 1-2 micronTRANSPARENT TOP COAT: 9-11 micron wrinkled super-PE











gloss 20±10 EN 13523-2 (ECCA T2)



100% EN 13523-5 (ECCA T5)


100% EN 13523-6 (ECCA T6)



0T-2T* EN 13523-7 (ECCA T7)


>100 EN 13523-11 (ECCA T11)

PRODUCTFAUX WOOD EFFECT

PRODUCT

FIN

TO

LEG

NO

�

FAUX WOOD EFFECT

PRODUCT

FIN

TO

LEG

NO

This is a special process capable of reproducing the shades typical of wood. A beige base coat is applied, fol-lowed by brown ink, and a smooth or textured coat on the top side and a foamable back coat with a dry film on the back side. Alusteel can reproduce nine different types of wood in terms of colour and grain design. PVDF faux wood effect available upon request.

corrosion - penetration after cross cutting

250h exposure 1 mm


500h exposure 3 mm

200h exposure no appreciable change in colour

other colours and/or decorations available



TOP SIDEPRIMER: 4-6 micronBASE COAT: 10-12 micron pur INK: 1-2 micronTRANSPARENT TOP COAT: 10-12 micron smooth PE 1

BACK SIDE

FOAMABLE BACK COAT: 4-6 micron



RESISTANCE TO SALT FOG

UVA RESISTANCE






gloss 20 -5/+10 EN 13523-2 (ECCA T2)



100% EN 13523-5 (ECCA T5)


100% EN 13523-6 (ECCA T6)



0T-2T* EN 13523-7 (ECCA T7)


>100 EN 13523-11 (ECCA T11)

PRODUCTALUTITANIUM

PRODUCT

ALU

TIT

AN

IUM

�

ALUTITANIUM

PRODUCT

ALU

TIT

AN

IUM

During this cycle coatings are applied to give the treated material an appearance similar to a zinc titanium finish. Aluminium substrate.The product is suitable for outdoor applications (sheet metal work, panels, etc.). Due to the presence of multi colour decoration, no delta E value can be indicated despite item complementariness. A wrinkled transparent paint can be used to give a rougher appear-ance. Super-PE Alutitanium available upon request.



TOP SIDEBASE COAT: 5-7 micron primerINK: 1-2 micronTRANSPARENT TOP COAT: 16-18 micron PE














100% EN 13523-5 (ECCA T5)


100% EN 13523-6 (ECCA T6)



0T-2T* EN 13523-7 (ECCA T7)


>100 EN 13523-11 (ECCA T11)

PRODUCTBLACKTITANIUM

PRODUCT

BLA

CK

TIT

AN

IUM

�

BLACKTITANIUM

PRODUCT

BLA

CK

TIT

AN

IUM



TOP SIDEBASE COAT: 9-11 micron PE INK: 1-2 micronTRANSPARENT TOP COAT: 16-18 micron PE














100% EN 13523-5 (ECCA T5)


100% EN 13523-6 (ECCA T6)



0T-2T* EN 13523-7 (ECCA T7)


>100 EN 13523-11 (ECCA T11)

During this cycle coatings are applied to give the treated material an appearance similar to a black zinc titanium finish. Aluminium substrate. The product is suitable for outdoor applications (sheet metal work, panels, etc). Due

to the presence of multi colour decoration, no delta E val-ue can be indicated despite item complementariness. A wrinkled transparent paint can be used to give a rougher appearance. PVDF Blacktitanium available upon request.

PRODUCTALUCOPPER

PRODUCT

ALU

CO

PP

ER

�

ALUCOPPER

PRODUCT

ALU

CO

PP

ER

During this cycle polyurethane coatings are applied on an aluminium or steel substrate (ZINCOPPER), thus ob-taining a final appearance similar to antique copper. The product is suitable for outdoor applications (sheet metal work, panels, etc.). Due to the presence of multi colour decoration, no delta E value can be indicated despite item complementariness. PVDF product version available upon request.



TOP SIDEBASE COAT: 14-16 micron copper pur INK: 1-2 micronTRANSPARENT TOP COAT: 9-11 micron super-PE











gloss 20±10 EN 13523-2 (ECCA T2)



100% EN 13523-5 (ECCA T5)


100% EN 13523-6 (ECCA T6)



0T-2T* EN 13523-7 (ECCA T7)


>100 EN 13523-11 (ECCA T11)

PRODUCTALUCARBONIUM

PRODUCT

ALU

CA

RB

ON

IUM

�

In this cycle coating are applied to make the material structure resemble that of carbon fibre. The substrate is aluminium or steel. The product is suitable for both in-door and outdoor applications. Due to the presence of multi colour decoration, no delta E value can be indicat-ed despite item complementariness. PVDF Alucarbonium available upon request.

ALUCARBONIUM

PRODUCT

ALU

CA

RB

ON

IUM



TOP SIDEBASE COAT: 14-16 micron black pur INK: 1-2 micronTRANSPARENT TOP COAT: 9-11 micron wrinkled super-PE











gloss 20±10 EN 13523-2 (ECCA T2)



100% EN 13523-5 (ECCA T5)


100% EN 13523-6 (ECCA T6)



0T-2T* EN 13523-7 (ECCA T7)


>100 EN 13523-11 (ECCA T11)

PRODUCTANTIQUED HALF-ROUND ROOF TILE

PRODUCT

CO

PP

O A

NT

ICA

TO

�

PRODUCT

CO

PP

O A

NT

ICA

TO

This a special process using coatings specifically de-signed to make the treated material similar to antiqued half-round roof tile, reproducing the classic colour as-sumed by half-round roof tiles as they age over time. This finish is available for aluminium and galvanized steel laminates and is suitable for outdoor applications (roof-

ing systems, panels, etc.). The polyamide paint applied is enriched with powdered polyester, which means it can provide a guarantee in relation to the coated substrate (e.g. 10 years for galvanized steel). Due to the presence of multi colour decoration, no delta E value can be indicated despite item complementariness.

ANTIQUED HALF-ROUND ROOF TILE


250h exposure 1 mm


500h exposure 3 mm

200h exposure no appreciable change in colour



TOP SIDEPRIMER: 4-6 micronBASE COAT: 40-50 micron pamd DECORATION: powdered paintTRANSPARENT TOP COAT: 4-6 micron smooth PE 1

BACK SIDE

FOAMABLE BACK COAT: 4-6 micron



RESISTANCE TO SALT FOG

UVA RESISTANCE



gloss 1-3 EN 13523-2 (ECCA T2)



100% EN 13523-5 (ECCA T5)


100% EN 13523-6 (ECCA T6)



0T-2T* EN 13523-7 (ECCA T7)


>100 EN 13523-11 (ECCA T11)




PRODUCTALUPURE

PRODUCT

ALU

PU

RE

�


QUALITY TESTS

* see table “Gloss Acceptance Requirements”**according to substrate physical state

GLOSS ACCEPTANCE REQUIREMENTS

The main advantages offered by ALUPURE are:non-combustible material perfect flatnessPVDF coating provides ultimate resistance to UV rays and other aggressive agentswide range of colours and finishes (pastel and metallic)optimum mechanical properties bendable, with no need for rear side millingeco-compatibility: 100% recyclableexcellent Life Cycle Costminimized maintenance


TOP SIDEPDVF PRIMER: 4-5 micronTOP COAT: 20 micron PVDF (gloss: 30 gloss units max) or PVDF PRIMER: 4-5 micron BASE COAT: 10 micron PVDFTOP COAT: 20 micron transparent PVDF (gloss: 50-80 gloss units)

BACK SIDEBACK COAT

ALUPURE

PRODUCT

ALU

PU

RE

ALUPURE is a top performance product ideal for high-end architectural surfaces, fully complying with safety and environmental sustainability. The ALUPURE alumin-ium sheet guarantees perfect flatness and resistance to mechanical stress, hence its suitability for replacing alu-minium-plastic-aluminium composite panels. The PVDF coating gives the product extraordinary resistance to at-

mospheric agents, thus providing a pleasing finish which does not deteriorate over time. ALUPURE is not flamma-ble and does not pose any fire risk, as its aluminium core is non-flame propagating and does not emit toxic gases or fumes, unlike plastic core panels. As a result, ALUPURE is classified as Class A1 in compliance with the European standard EN 13501.

substrate alloy 5754 AA

physical state H42-H44

thickness 2.0 mm

mechanical properties in accordance with UNI EN 485-2

width up to 1,250 mm

length coils or sheets, up to 6,000 mm

coating 25 µm PVDF paints for standard finishes;35 µm for metallic finishes

colours main colours from RAL folder and customized finishes upon demand

protective film peelable, transparent or black/white

fire resistance non-combustible – Class A1 in compliance with European standard EN 13501-1

off-cuts recycling 100% recyclable

UV resistance category RUV4

corrosion resistance category RC4


thickness 25 or 35 µm EN 13523-1 (ECCA T1)

gloss * EN 13523-2 (ECCA T2)

pencil hardness HB-F EN 13523-4 (ECCA T4)


100% EN 13523-5 (ECCA T5)


100% EN 13523-6 (ECCA T6)

adhesion after bending at 25°c 1-2T** EN 13523-7 (ECCA T7)

resistance to cracking on bend-ing (t-bend test) at 25°c

1.5-2T** EN 13523-7 (ECCA T7)


>100 EN 13523-11 (ECCA T11)

GLOSS CATEGORY GLOSS RANGE ACCEPTABLE VARIATION

1 (matt) 0-30 +/- 5 units

3 (gloss) 50-90 +/- 10 units

2 mm aluminium substrate 2 mm aluminium substrate

top: 20 µm PVDF top: PVDF 15 µm

top: 12 µm transparent PVDF

primer: 5 µm primer: 10 µm

PRODUCTMATCOPPER

PRODUCT

MA

TC

OP

PER

MATCOPPER

PRODUCT

MA

TC

OP

PER

Matcopper is special coating where the purpose of the design and finish is to resemble actual copper. The advantage of this product is not only the lower cost than actual copper, but the lasting resemblance without the oxidation. This product can be utilized for external use in applications such as gutters, roofing etc...

Technical data on aluminium substrate

PRE-TREATMENT2 Degreasing Stages + Chrome Free Passivation

TOP SIDETRANSPARENT PRIMER: 5-6 micronTOP COPPER FINISH PE: 15-17 micron

BACK SIDEEpoxy Based Grey / Transparent Back Coat 5-7 microns or 15 -17 micron monocouche

TECHNICAL CHARACTERISTICS

*depending on alloy and mechanical properties

CATEGORY UV RESISTANCE: RUV2

CATEGORY CORROSSION RESISTANCE: RC2

REACTION TO FIRE CLASSIFICATION:CLASS A1

according NORM UNI EN 13501-1

THE PAINT is conform to the directive of Rohs printed on recycled paper

TEST VALORE NORMA DI RIFERIMENTO

thickness 20-23 µm EN 13523-1 (ECCA T1)

gloss 80° EN 13523-2 (ECCA T2)


impact test 100% EN 13523-5 (ECCA T5)

Erichsen indentation 100% EN 13523-6 (ECCA T6)

T-BEND TEST (CRACKING) 0T-1T* EN 13523-7 (ECCA T7)

T-BEND TEST (TAPE OFF) 0T-2T* EN 13523-7 (ECCA T7)

resistance to methylethylketone (M.E.K.)

>100 Double Rubs

EN 13523-11 (ECCA T11)

PRODUCTIRIDIUM

PRODUCT

IRID

IUM

IRIDIUM

PRODUCT

IRID

IUM

Thanks to the special formulation, this 3-layer coating me-tallic PVDF paint is capable of obtaining a surprising iri-descent effect in a wide range of colours. This product is suitable for indoor and outdoor use.


Technical Data on Aluminium Substrate


TOP COATPRIMER PVDF: 9-11 micronBASE GREY COAT PVDF: 16-18 micronTOP TRASPARENT PVDF IREDESCENT: 14-16 micron

BACK COATEpoxy Based Grey / Transparent Back Coat


*depending on alloy and mechanical properties

CATEGORY UV RESISTANCE UV: RUV4

CATEGORY RESISTANCE TO CORROSION: RC4

REACTION TO FIRE CLASSIFICATION: A1

accordind NORM UNI EN 13501-1

THE PAINT is conform to the directives of Rohs printed on recycled paper

TEST VALORE NORMA DI RIFERIMENTO


gloss 23-37 EN 13523-2 (ECCA T2)



erichsen indentation 100% EN 13523-6 (ECCA T6)




>100 Double Rubs

EN 13523-11 (ECCA T11)

PRODUCTANTIFINGER

PRODUCT

AN

TIF

ING

ER

ANTIFINGER

PRODUCT

AN

TIF

ING

ER

Natural Steel and Aluminium are very popular materials used today in architecture, especially for interior design. We can find it used on furnishing accessories, furniture and kitchen appliances. But when used for interior design, it has one major disadvantage, fingerprints can be seen very easily. This is why we developed Antifinger.

This highly resistant coating, thanks to Nano-technology, is resistant to “thermal shock”, thus preventing the mark-ing of a fingerprint to be seen on the coated surface. It is also extremely resistant to wear, scratches and chemical agents, thus allowing the metal substrate to last for years to come.


Technical data on stainless steel substrate

PRE-TREATMENT no-mineral water cleaning

TOP SIDECOLOURED TOP: 4-6 micron

BACK SIDEBACK COAT: 5-7 micron



printed on recycled paper

TEST VALUE NORM REFERANCE

thickness 5 µm EN 13523-1 (ECCA T1)


pencil hardness F minimum EN 13523-4 (ECCA T4)






>100 EN 13523-11 (ECCA T11)

PRODUCTANTIFINGER

PRODUCT

AN

TIF

ING

ER

ANTIFINGER

PRODUCT

AN

TIF

ING

ER

Natural Steel and Aluminium are very popular materials used today in architecture, especially for interior design. We can find it used on furnishing accessories, furniture and kitchen appliances. But when used for interior design, it has one major disadvantage, fingerprints can be seen very easily. This is why we developed Antifinger.

This highly resistant coating, thanks to Nano-technology, is resistant to “thermal shock”, thus preventing the mark-ing of a fingerprint to be seen on the coated surface. It is also extremely resistant to wear, scratches and chemical agents, thus allowing the metal substrate to last for years to come.


Technical data on stainless steel substrate

PRE-TREATMENT no-mineral water cleaning

TOP SIDECOLOURED TOP: 4-6 micron




printed on recycled paper


thickness 5 µm EN 13523-1 (ECCA T1)


pencil hardness F minimum EN 13523-4 (ECCA T4)






>100 EN 13523-11 (ECCA T11)

PRODUCTALUZINCUM

PRODUCT

ALU

ZIN

CU

M

ALUZINCUM

PRODUCT

ALU

ZIN

CU

M

Aluzincum is the perfect coated product in alternative to Zinc. This PVDF coating resembles Zinc in colour and texture but with the benefit of being more cost efficient. That’s not all. Within the paint lies pure zinc particles. Its purpose, to create a natural, living patina that gradually changes over time, recreating the natural finish typical of zinc aging.

Unlike pure zinc, this product is not influenced by envi-ronmental conditions and can be processed uniformly throughout the years; moreover, the PVDF coating guar-antees excellent resistance over time and in the most ex-treme environments.For these reasons, this product is recommended for all external uses and in particular for facades and roofing.



TOP COATZINKGRAU 2 LAYER PVDF

BACK COATEpoxy Based Grey / Transparent Back Coat


* the master sample is considered the first production** depending on alloy and mechanical properties

REACTION TO FIRE CLASSIFICATION: CLASS A1

according to norm UNI EN 13501-1


TEST VALUE NORM REFERENCE


gloss 4 ± 3° EN 13523-2 (ECCA T2)

colour measurement < 1.5* EN 13523-3 (ECCA T3)

pencil hardness HB-H EN 13523-4 (ECCA T4)



T-BEND TEST (CRACKING) 0T-2T** EN 13523-7 (ECCA T7)

T-BEND TEST (TAPE OFF) 0T-2T** EN 13523-7 (ECCA T7)

resistance to methylethylketone (M.E.K)

>100 Double Rubs

EN 13523-11 (ECCA T11)

acedic salt spray test 1000 h (500 series alloy)

EN 13523-8

PRODUCTALULIGHT

PRODUCT

ALU

LIG

HT

ALULIGHT

PRODUCT

ALU

LIG

HT

Alulight is a 3-layer paint cycle where the varnish applied contains photoluminescent properties. The photolumines-cent paint contains special pigments that give the surfaces a high degree of phosphorescence, capable of absorbing energy throughout the day, mostly UV Rays, and at night this energy is then released, emitting light anywhere form 6 - 9 hours. This photoluminescent transparent coating can be applied on any polyester finish, however, in order to get the maximum effect of this paint, it is recommended to

use it on a light background, the white colour is recom-mended. The background colour is one of the main fac-tors to be considered: according to it the light emission will be higher. By applying the phosphorescent paint on a black surface, the effect is almost erased. This product is suitable for many fields and applications such as safety signs where maximum visibility is required in emergency situations or even on the ceiling of one’s home to have the star light effect at night.

Technical Data on Aluminium Substrate

PRE-TREATMENT2 stage degreasing + chrome-free chemical conversion

TOP SIDEPRIMER: 5-7 micronBASE COAT: 18-22 micronPHOTOLUMINESCENT TRASPARENT: 13-17 micron


TECHNICAL SPECIFICATION





in accordance with European Standard EN 13501-1









>100 EN 13523-11 (ECCA T11)

PRODUCTALUBASALT

PRODUCT

ALU

BA

SALT

ALUBASALT

PRODUCT

ALU

BA

SALT

Alubasalt is a newly developed design studied carefully to obtain a “Stone like” appearance on the coated product. With the perfect mixture of colours and texture, we were able to obtain a design similar to the volcanic stone known as Basalt. This unique finish can be applied in various areas, both for internal as well as external design. One of its most common uses is for roofing and facades. Not only does the design provide an aesthetic appeal to

the building, but the paint cycle was developed in a way to resist against external agents such as UV Rays, dust and rain, guaranteeing the integrity of the finish and design through-out the years. The similarity to “Basalt” has also lead to the latest trends for interior design: in fact it gives a room a rustic and natural feel which marries perfectly to even the most modern inte-riors, providing the perfect element of contrast.


PRE-TREATMENT2 stage degreasing + chrome-free chemical conversion

TOP SIDEBASE COAT: 11-13 micronINK: 1-2 micronTRANSPARENT TOP COAT: 14-15 micron


TECHNICAL SPECIFICATION





in accordance with european standard en 13501-1








T-BEND TEST(CRACKING) 0T-1T* EN 13523-7 (ECCA T7)



>100 EN 13523-11 (ECCA T11)

PRODUCT ALUTEKU ANTIQUED GREEN COPPER · 2018-07-03 · ALUTEKU ANTIQUED GREEN COPPER PRODUCT...

Documents

Transcript of PRODUCT ALUTEKU ANTIQUED GREEN COPPER · 2018-07-03 · ALUTEKU ANTIQUED GREEN COPPER PRODUCT...