prodProfile-TMR Mate-cpn press 15-0109 · TMR-Mate Product Profile - Promote ® Forage-Mate ®...
2
TMR-Mate Product Profile - Promote® Forage-Mate® TMR-Mate Promote® Forage-Mate® TMR-Mate is a unique blend of organic acids for yeast and mold inhibition to enhance nutrient retention in Total Mixed Rations (TMR). Benefits Reduces yeast and mold growth in TMR Reduces nutrient loss due to yeast and mold growth Enhances dry matter and nutrient intake by lactating cows during heat stress Research indicates a return on investment as high as 7:1 for nutrient retention during challenging summer conditions Features Research-proven blend of organic acids for top performance Non-corrosive blend, will not damage equipment Dry form to assure accurate application while blended in the TMR Storage • Store in a dry location Packaging and Forms Dry Organic Acid Form (ready to use) • 50 lb heat-sealed bag Guaranteed Analysis Active Ingredients ....................................................................... 56.0% Inert Ingredients .......................................................................... 44.0% Total ................................................................................................... 100% Active Ingredients Calcium propionate, benzoic acid, citric acid, sodium acetate, sodium bentonite, calcium carbonate, sodium aluminosilicate, mineral oil, natural and artifical flavors. • Add Promote® Forage-Mate® TMR Mate to TMRs at the time of mixing • General Recommendations: 2 – 7 lbs TMR-Mate/ton of TMR • Introduce 2 lbs of TMR-Mate/ton when temperature exceed 72 degrees or the Temperature Humidity Index (THI) exceeds 68. (See THI chart on reverse side) •Increase rate 1 lb/ton for every 5 point change in THI These are general recommendations and mixing rates will depend on numerous stress factors including: • Mold, yeast, & mycotoxin load or contamination • Challenge of aerobic conditions (i.e. silo face removal rate) • Grain moisture level and particle size • Bunk life expectancy rate Recommended Usage The above conditions will cause rapid growth of yeasts, bacteria, & mycotoxin producing molds. The more stress factors to which TMR is exposed, the higher the required treatment rate of TMR-Mate. Performance 0 20 40 60 80 100 TMR-Mate Control Milk Intake Pounds Research project # 2585-366 48.3 53.2 77.3 84.3 © 2015 Cargill Incorporated Rev. 17-0315 www.feedpromote.com Forage-Mate ® Provimi North America, Inc. Brookville, OH. ®
Transcript of prodProfile-TMR Mate-cpn press 15-0109 · TMR-Mate Product Profile - Promote ® Forage-Mate ®...
TMR-MateProduct Profile - Prom
ote® Forage-Mate® TM
R-Mate
Promote® Forage-Mate® TMR-Mate is a unique blend of organic acids for yeast and mold inhibition to enhance nutrient retention in Total Mixed Rations (TMR).
BenefitsReduces yeast and mold growth in TMR
Reduces nutrient loss due to yeast and mold growth
Enhances dry matter and nutrient intake by lactating cows during heat stress
Research indicates a return on investment as high as 7:1 for nutrient retention during challenging summer conditions
FeaturesResearch-proven blend of organic acids for top performance
Non-corrosive blend, will not damage equipment
Dry form to assure accurate application while blended in the TMR
Storage
• Store in a dry location
Packaging and FormsDry Organic Acid Form (ready to use)
• 50 lb heat-sealed bag
Guaranteed AnalysisActive Ingredients.......................................................................56.0%Inert Ingredients..........................................................................44.0%Total...................................................................................................100%
Active IngredientsCalcium propionate, benzoic acid, citric acid, sodium acetate, sodium bentonite, calcium carbonate, sodium aluminosilicate, mineral oil, natural and arti�cal �avors.
• Add Promote® Forage-Mate® TMR Mate to TMRs at the time of mixing
• General Recommendations: 2 – 7 lbs TMR-Mate/ton of TMR
• Introduce 2 lbs of TMR-Mate/ton when temperature exceed 72 degrees or the Temperature Humidity Index (THI) exceeds 68. (See THI chart on reverse side)
•I ncrease rate 1 lb/ton for every 5 point change in THI
These are general recommendations and mixing rates will depend on numerous stress factors including:
• Mold, yeast, & mycotoxin load or contamination
• Challenge of aerobic conditions (i.e. silo face removal rate)
• Grain moisture level and particle size
• Bunk life expectancy rate
Recommended Usage
The above conditions will cause rapid growth of yeasts, bacteria, & mycotoxin producing molds.The more stress factors to which TMR is exposed, the higher the required treatment rate of TMR-Mate.
Performance
0
20
40
60
80
100
TMR-Mate Control
MilkIntake
Poun
ds
Research project # 2585-366
48.353.2
77.384.3
© 2015 Cargill Incorporated Rev. 17-0315
www.feedpromote.com
Forage-Mate®
Provimi North America, Inc.Brookville, OH.
®
TMR-Mate
Zimbelman & Collier, University of Arizona, 2011
Temperature Humidity Index
Forage-Mate®
®
© 2015 Cargill Incorporated Rev. 17-0315
www.feedpromote.com Provimi North America, Inc.Brookville, OH.
Product Profile - Promote® Forage-M
ate® TMR-M
ate
