Multi- Q Introd uction Welcome to … Skip Rules MME Jeopardy.
Prod uction materialsonf-nfb.gc.ca/medias/download/documents/pdf/Production... · 2012-12-13 ·...
Transcript of Prod uction materialsonf-nfb.gc.ca/medias/download/documents/pdf/Production... · 2012-12-13 ·...
3.1 VHS box
3.3 VHS jacket
3.5 VHS gumbo jacket
3.7 DVD box
3.9 DVD disc
3.10 CD-ROM disc
3.11 Package contents
3.12 One-sheet – Bilingual version
3.14 One-sheet – Unilingual version
3.16 One-sheet and presentation folder
3.17 One-sheet contents
3.18 Poster
3.19 Postcard
3.20 Advertisement
Productionmaterials
National Film Board of Canada
FRONT AND SPINE■ Horizontal NFB logos on the front and
spines are always of identical size inwhite (reversed out) on a black band.The black band must extend along thebottom of the box across the front andboth spines.
■ On the front, the production statementalways appears in white (reversed out).
■ On both spines, the French titleappears bottom to top, and the English
title top to bottom. The identificationnumber is placed at the top in black orwhite (reversed out), depending on thecolour of the background.
BACK■ The UPC symbol, the captioning logo,
the Dolby® Stereo logo, the format andidentification number, and the NFB’sWeb address and logo must appear atthe bottom of the box as illustrated.
■ The horizontal logo may be used inblack or white (reversed out), depending on the colour of the back-ground. It is the same size as those on the front and spines.
■ The background colour or photo mustprovide a sufficiently clear surface to allow the logo to stand out andremain visible.
Production materials VHS box 3.1
Standardback presentation NFB logo inwhite on darkbackground
Standardback presentationNFB logo inblack on palebackground
Identification number
Production statement
Standardblack band
BACK SPINESPINE FRONT
Production materials VHS box 3.2
9.187"
0.719"
1.031"
7.437"
10.968"
0.625"
1.031" 4.125" 1.062" 4.125"
1.215" 1.167"
0.853"
1.0"
0.2"
0.25"
0.413"
0.469"
0.25"
0.25"0.25" 0.25"
A AB B
Identification numberFranklin Gothic Condensed8pt, capitals, centredQuarkXPress kerning: 8 lllustrator kerning: 50
Baseline
1.0"
Contact informationFranklin Gothic Condensed7pt, 8pt leading, c/lc
UPC Symbol Black inside a white rectangle1.215" W x 1.0" H
Production statementFranklin Gothic Condensed8pt, 8pt leading, capitals QuarkXPress kerning: 8 lllustrator kerning: 50
Black bandHeight: 1.0"CMYK colour:40C, 0M, OY, 100K
NFB logosAll logos are the same dimensions0.853" W x 0.413" H
ALIGNMENT OF THE LOGO Bottom alignment is based on the square containing the symbol, not on the letter “O”, which should extend beyond the baseline.
Centre alignment is based on the visual centre of the logo, between the letter “N” and the square containing the symbol.
1
2
Baseline
Visual centre
FRONT AND SPINE■ Horizontal NFB logos on the front and
spine are always of identical size inwhite (reversed out) on a black band.The black band must extend along thebottom of the jacket across the frontand spine.
■ On the front, the production statementis always in white (reversed out).
■ On the spine, the French title appearsbottom to top, and the English title top
to bottom. The identification number is placed at the top in black or white(reversed out) depending on the colourof the background.
BACK■ The captioning logo, the Dolby® Stereo
logo, the format and identification number, and the NFB’s Web addressand logo must appear at the bottom ofthe jacket as illustrated.
■ The horizontal logo may appear in blackor white (reversed out) depending onthe colour of the background. It’s thesame size as the logos on the front and spine.
■ The background colour or photo mustprovide a sufficiently clear surface to allow the logo to stand out andremain visible.
Production materials VHS jacket 3.3
Standard back presentation NFB logo in white on darkbackground
Standard back presentationNFB logo in black on palebackground
Identification number
Production statement
Standard black band
BACK SPINE FRONT
Production materials VHS jacket 3.4
1.215"0.25"
0.781"
1.167"
0.853"
0.25"
0.25"
0.413"
0.25"
0.25"0.25"
7.917"
1.139" 4.5"4.5"
10.139"
B B
Identification numberFranklin Gothic Condensed8 pt, capitals, centredQuarkXPress kerning: 8lllustrator kerning: 50
Baseline
Contact informationFranklin Gothic Condensed7 pt, 8 pt leading, c/lc
Production statementFranklin Gothic Condensed8 pt, 8 pt leading, capitalsQuarkXPress kerning: 8lllustrator kerning: 50
Black bandHeight: 0.781"CMYK colour:40C, 0M, 0Y, 100K
NFB logos All logos are the same dimensions0.853" W x 0.413" H
ALIGNMENT OF LOGOBottom alignment is based on the square containing the symbol, not on the letter “O”, which should extend beyond the baseline.
Centre alignment is based on the visual centre of the logo, between the letter “N” and the square containing the symbol.
1
2
Baseline
Visual centre
FRONT AND SPINE■ Horizontal NFB logos on the front and
spine are always of identical size inwhite (reversed out) on a black band.The black band must extend along thebottom of the jacket across the frontand spine.
■ On the front, the production statementis always in white (reversed out).
■ On the spine, the French title appearsbottom to top, and the English title top
to bottom. The identification number isplaced at the top, in black or white(reversed out) depending on the colourof the background.
BACK■ The UPC symbol, the captioning logo,
the Dolby® Stereo logo, the format andidentification number, and the NFB’sWeb address and logo must appear atthe bottom of the jacket as illustrated.
■ The horizontal logo may appear in blackor white (reversed out) depending onthe colour of the background. It’s thesame size as the logos on the front and spine.
■ The background colour or photo mustprovide a sufficiently clear surface to allow the logo to stand out andremain visible.
Production materials Gumbo jacket 3.5
Standard back presentation NFB logo in white on darkbackground
Standard back presentationNFB logo in black on palebackground
Identification number
Mention de production
Standard black band
BACK SPINE FRONT
Production statement
Production materials Gumbo jacket 3.6
ALIGNMENT OF LOGOBottom alignment is based on the square containing the symbol, not on the letter “O”, which should extend beyond the baseline.
1
Baseline
Contact informationFranklin Gothic Condensed7 pt, 8 pt leading, c/lc
UPC symbolIn black inside a white rectangle1.215" W x 1.0" H
Production statementFranklin Gothic Condensed8 pt, 8 pt leading, capitalsQuarkXPress kerning: 8lllustrator kerning: 50
Black bandHeight: 1.0"CMYK Colour:40C, 0M, 0Y, 100K
0,25"
5.375"5.375"
8.625"
11.625"
Rounded corners: radius 0.25"
Flat surface of rounded spine
0.825"
Identification numberFranklin Gothic Condensed8 pt, capitals, centredQuarkXPress kerning: 8lllustrator kerning: 50
0.25"
0.25"
0.25" 0.25"
1.0"
1.215" 1.167"
A A0.853"0.413"
Baseline 0.25"
0.781"
NFB logos All logos are the same dimensions0.853" W x 0.413" H
FRONT■ Horizontal NFB logos on the front and
spine are always of identical size inwhite (reverse out) on a black band.The black band must extend along thebottom of the jacket across the frontand spine.
■ On the front, the production statementis always in white (reversed out).
■ The DVD logo must appear on the front.
BACK■ The UPC symbol, the captioning logo,
the Dolby® Stereo logo, the format andidentification number, and the NFB’sWeb address and logo must appear atthe bottom of the jacket as illustrated.
■ The horizontal logo may appear in blackor white (reversed out) depending on thecolour of the background. It’s the samesize as the logos on the front and spine.
■ The background colour or photo mustprovide a sufficiently clear surface to allow the logo to stand out andremain visible.
SPINE■ Only the square containing the symbol
should appear on the spine, centredand in white (reversed out) on theblack band. It’s always the same sizeas the logo on the front.
■ On the spine, the French title appearsbottom to top, and the English title top to bottom.
■ The identification number is placed at the top, in black or white (reversedout) depending on the colour of thebackground.
Production materials DVD box 3.7
SPINE
FRONTBACK
Production statement
Standard black band
Standard back presentation NFB logo in white on darkbackground
Standard back presentationNFB logo in black on palebackground
Contact informationFranklin Gothic Condensed7 pt, 8 pt leading, c/lc
UPC symbolBlack inside a white rectangle1.215" W x 1.0" H
Production statementFranklin Gothic Condensed8 pt, 8 pt leading, capitalsQuarkXPress kerning: 8lllustrator kerning: 50
Black bandHeight: 0.781"CMYK Colour:40C, 0M, 0Y, 100K
NFB Logo Same dimensions on the back0.853" W x 0.413" H
ALIGNMENT OF LOGOBottom alignment is based on the square containing the symbol, not on the letter “O”, which should extend beyond the baseline.
1
Baseline
5.095" 5.095"0.56"
7.188"
10.75"
1.215"0.25"
0.781"
1.0"
1.167"
0.853"
0.25"
0.25"
0.413"
0.25"0.25"0.406"
Baseline
A A
Identification numberFranklin Gothic Condensed5 pt, capitals, centredQuarkXPress kerning: 8lllustrator kerning: 50
0.187"
Production materials DVD box 3.8
The NFB logo and the production copyright must appear on allDVD discs produced by the NFB, along with the DVD initialism.
The logo and copyright may be in black or white (reversed out)depending on the colour of the background.
Production materials DVD disc 3.9
The NFB has had its logo and corporate name engraved on blankCDs. A space has been left for a description of the contents.
These 700 MB discs, article number S.29-34, are available at NFB Stores.
Production materials CD-ROM disc 3.10
Production materials Package contents 3.11
FRONT
Title
Director (optional)
A National Film Board of Canada production or A co-productionof the National Film Board of Canada and XXX
SPINE
Internal identification number
BACK
Title
Description
CreditsDocumentaries
■ Director■ Research and script■ Cinematographer■ Sound■ Picture editing■ Sound editing■ Original music■ Producer■ A National Film Board of Canada production or A co-production
of the National Film Board of Canada and XXX
Animation■ Director■ Writer■ Animation■ Digital imaging (where applicable)■ Animation technique(s)■ Music/Original music■ Voice and narration (where applicable)■ Sound editing■ Foley■ Re-recording■ Executive Producer■ Producer■ A National Film Board of Canada Production or A co-production
of the National Film Board of Canada and XXX
Acquisitions■ Same credits up to XXX Production■ National Film Board of Canada Distribution ■ Produced with the participation of XXX and the
collaboration of XXX
Length
Format identification (VHS, DVD, CD-ROM, DVD-ROM)■ For DVDs, include NTSC and Dolby Digital logos, and mention
extras included in the menu■ For CD-ROMs, add information regarding required platforms
Captioning logoClosed captioned for the hearing impaired. Decoder required.
Dolby Stereo logo
Ordering Information Canada 1 800 267-7710USA 1 800 542-2164International (514) 283-9450Web site www.nfb.ca
CopyrightA licence is required for any reproduction, television broadcast,sale, rental or public screening. Only educational institutionsor non-profit organizations that have obtained this videodirectly from the NFB or an authorized distributor have the right to show this video, free of charge, to the public.© 2003 National Film Board of Canada. All rights reserved.
PrintingPrinted in Canada
Bar code for home videos and DVDs
Information concerning the visual contents of all NFB production packages (VHS box, VHS jacket, gumbo, DVD, CD-ROM, DVD-ROM)
FRONT■ The one-sheet is presented vertically. The visual, including the
title and the name of the producer, covers the entire front. A blackband covers the entire width of the bottom of the document.
■ The position of the NFB logo (horizontal version) is set. The logo is always in white (reversed out) on the black band.
■ The production statement is always in white (reversed out) on the black band.
Production materials One-sheet – Bilingual version 3.12
0.568"1.172"
0.938"
11.0"
8.5"
0.25"0.25"Production statementFranklin Gothic Condensed8.5 pt, 11 pt leading, capitalsQuarkXPress kerning: 8lllustrator kerning: 50
Baseline
Black bandHeight: 0.938"CMYK colour:40C, 0M, 0Y, 100K
ALIGNMENT OF LOGOBottom alignment is based on the square containing the symbol, not on the letter “O”, which should extend beyond the baseline.
1
Baseline
BACK■ The back of the one-sheet includes a vertical band to the right
containing the title of the production. The vertical band is the part of the one-sheet that will remain visible when thedocument is inserted in the presentation pocket and that willidentify the production. (Please see next page.) English titlesare always read from top to bottom and French titles from bottom to top.
■ Production photos are placed on the upper part of the document as shown here.
■ Bilingual one-sheets are set in two columns, one for each language.
■ The “For more information/Pour plus de renseignements” section must always be in the lower part of the document.
Production materials One-sheet – Bilingual version 3.13
7.375"
3.125" 3.125"
1.0"
1.125"
2.125"
0.25"
0.25"0.25"English text French text
Baseline Gutter
0.625"
The height of the photo can vary depending on available space.
Vertical band Total width: 1.125"
Visible part of vertical band after insertion in the pocket: 1.0"
Titles must be visually centred over the visible width (between yellow dotted line and edge) and positioned in the upper part of the vertical band. English titles are read from top to bottom and French titles from bottom to top.
For more information/ Pour plus de renseignements This section may vary in height depending on the amount of information required. The variation in height affects where the text starts, as the bottom must be aligned with the bottom of the logo.
NFB logo Vertical version in black. The logo is resting on the baseline, centred over the gutter. Dimensions: 0.451" W x 0.943" H
Director’s biography Position and size may vary
Typeface Font ITC Franklin Gothic (Adobe)
Photos must occupy the entire available width.
FRONT■ The one-sheet is presented vertically. The visual, including the
title and the name of the producer, covers the entire front. A blackband covers the entire width of the bottom of the document.
■ The position of the NFB logo (horizontal version) is set. The logo is always in white (reversed out) on the black band.
■ The production statement is always in white (reversed out) on the black band.
Production materials One-sheet – Unilingual version 3.14
0.568"1.172"
0.938"
11.0"
8.5"
0.25"0.25"Production statementFranklin Gothic Condensed8.5 pt, 11 pt leading, capitalsQuarkXPress kerning: 8lllustrator kerning: 50
Baseline
Black bandHeight: 0.938"CMYK colour:40C, 0M, 0Y, 100K
ALIGNMENT OF LOGOBottom alignment is based on the square containing the symbol, not on the letter “O”, which should extend beyond the baseline.
1
Baseline
BACK■ The back of the one-sheet includes a vertical band to the right
containing the title of the production. The vertical band is thepart of the one-sheet that will remain visible when the document is inserted in the presentation pocket and that willidentify the production. (Please see next page.) English titlesare always read from top to bottom and French titles from bottom to top.
■ Production photos are placed on the upper part of the document as shown here.
■ The text is set in two columns.■ The “For more information/Pour plus de renseignements”
section must always be in the lower part of the document.
Production materials One-sheet – Unilingual version 3.15
7.375"
3.125" 3.125"
1.0"
1.125"
0.25"0.25"
Baseline
0.625"
The height of the photos can vary depending on available space.
Vertical bandTotal width: 1.125"
Visible part of vertical band after insertion in the pocket: 1.0"
Titles must be visually centred over the visible width (between yellow dotted line and edge) and positioned in the upper part of the vertical band. English titles are read from top to bottom and French titles from bottom to top.
For more informationThis section may vary in height depending on the amount of information required. The variation in height affects where the text starts, as the bottom must be aligned withthe bottom of the logo.
NFB logoVertical version in black. The logo is resting on the baseline.Dimensions:0.451" W x 0.943" H
Director’s biographyPosition and size may vary
TypefaceFont ITC Franklin Gothic (Adobe)
Photos must occupy the entire available width.
INSERTING THE ONE-SHEET IN THE FOLDERA flap has been provided in the cover of the presentation folderto hold the one-sheet (front side).
The vertical band will remain visible after the document isinserted in the folder so the production can be identified.
Production materials One-sheet and presentation folder 3.16
Presentation folder (closed)
Presentation folder with one-sheet inserted
One-sheet (back)
Fold
Production materials One-sheet contents 3.17
FRONT
Title
Director (optional)
A National Film Board of Canada production or A co-productionof the National Film Board of Canada and XXX
BACK
Title (in vertical band to the right)
The filmDescription
DirectorShort bio
CreditsDocumentaries
■ Director■ Research and script■ Cinematographer■ Sound■ Picture editing■ Sound editing■ Original music■ Producer■ A National Film Board of Canada production or A co-production
of the National Film Board of Canada and XXX
Animation■ Director■ Writer■ Animation■ Digital imaging (where applicable)■ Animation technique(s)■ Music/Original music■ Voice and narration (where applicable)■ Sound editing■ Foley■ Re-recording■ Executive Producer■ Producer■ A National Film Board of Canada Production or A co-production
of the National Film Board of Canada and XXX
Acquisitions■ Same credits up to XXX Production■ National Film Board of Canada Distribution ■ Produced with the participation of XXX and the
collaboration of XXX
Length
Internal identification number
Copyright© 2003 National Film Board of Canada
Ordering information■ National distribution 1 800 267-7710■ US distribution 1 800 542-2164■ International distribution (514) 283-9450■ [email protected]■ Web site www.nfb.ca■ Address and phone number of other distributors (if any)
Visual content of the one-sheet
■ The poster is presented vertically. The visual and the title coverthe entire front.
■ The NFB logo (horizontal or vertical version) must always beat the bottom of the document, on the left or right and may be
used in black or white (reversed out), depending on the colourof the background.
■ The background colour or photo must provide a sufficientlyclear surface to allow the logo to stand out and remain visible.
Production materials Poster 3.18
FRONT■ The front is presented vertically or horizontally. The visual and
the title cover the entire front. ■ The NFB logo (horizontal or vertical version) must always be
at the bottom of the document, on the left or right and may beused in black or white (reversed out), depending on the colourof the background.
■ The background colour or photo must provide a sufficientlyclear surface to allow the logo to stand out and remain visible.
BACK■ The back of the postcard is always horizontal. ■ The horizontal logo is used in black. The logo is the same size
as the one on the front. ■ The Contact information section must always appear at the
bottom left of the document, with the NFB logo as shown here.
Production materials Postcard 3.19
ALIGNMENT OF LOGOBottom alignment is based on the square containing the symbol, not on the letter “O”, which should extend beyond the baseline.
1
Baseline
0.25"Baseline 0.25"
0.25"
1.167" Contact informationFranklin Gothic Condensed7 pt, 8 pt leading, c/lcHorizontal NFB Logo
0,853"L x 0,413"H
6.0"
4.125"
FRONT BACK
■ The NFB logo (horizontal or vertical version) must always beat the bottom of the document, on the left or right, and may beused in black or white (reversed out), depending on the colourof the background.
■ The background colour or photo must provide a sufficientlyclear surface to allow the logo to stand out and remain visible.
Production materials Advertisement 3.20