Process Analyzer Sampling with Astute System IFPAC 2008 – Baltimore January 29,2008.

Process Analyzer Sampling with Astute System

IFPAC 2008 – Baltimore January 29 ,2008

EIF FILTRES

French compagny specialized since 30 years in

filtration equipments and sampling treatments.

January 30 ,2008January 30 ,2008IFPAC 2008 – Baltimore January 29 ,2008

Our philosophy:

Leave the contaminants in process

Separate as fast as possible the contaminants from the

sample

Reduce the treated volumes

Reduce and make easier the maintenance

January 30 ,2008IFPAC 2008 – Baltimore January 29 ,2008

Cross flow filtration with blow back systems

Liq/liq coalescing filter with jet fuel separator

Gas treament column

L Type housings

Modular and smart systems

For that, we have developed :


Realisations


COALESCING

FILTER

FILTER

GAS EJECTOR

SEPARATOR

VISCOSITY-DENSITY SENSOR

BLOW BACK

SYSTEM

EIF

TOPWORK COMPONENTS

ISA/ANSI S 76.00.02 Compliant

Petrochemical application


Typical gazoline sampling in front of Chromatograph


Specifications :

Fluid : gazoline

Filtration needed

liquid-liquid coalescing needed


New design in beginning of 2006

Cross flow filtration with blow back system

modular Intraflow assy

liquid-liquid coalescing with separator

Pneumatic control ( specific for the test)


Gazoline sampling for sulphur analyzer


TM

Cross flow filtration

Blow back system DECLIF HP MINI(low dead volume)

To analyzer via Intra flow

Fast loop

Cross flow filter 2S2LIF GM MINI 2 microns(low dead volume)


TM

Gazoline treatment

Séparator

Coalescing

housing


first installations comments

Flow sheet needed

Free space needed around components with maintenance ( filters for example …)

How to install , vertically or horizontally

Drain and vent take into consideration


The Answer !!


3 D Solution


The solution = 3D

Patent Application Pending


The same sampling evolution


TM

Compact

Top equipment easily accessible

Low dead volume

Fast loop

Astute SCF with tangential element0,5 microns


ASTUTE :

SP 76 compliant

Integrated cross flow filter

Modular

Compact

Low dead volume

Upgradeable


ASTUTE :

Top equipment easily accessible

Vertical and horizontal position installation possible

On the fast loop or in derivation

All the different paths on the same module( sample, standard, drain, vent ..)


For the sampling:

Reduce or eliminate the sampling line

Decrease the response time

Reduce the product and drain volumes

Temperature control and heating easier

Reduce the sample contamination risk


ASTUTE contribute to :

Measurement quality improvement

Cost of build and operating cost reduction Maintenance easier

Installations sécurity improvement


APPLICATIONS


Moisture sensor

Pressure regulator filter

Flow meter


TMTM

ISOLATING VALVES

PROCESS PIPE

DIRECT CONNECTION ON PROCESS

CCIMS CLAMPS

CCIMS System


Direct connection on process

Very short response time

Easy maintenance clamp connection

Low contamination level

Sampling reduction cost

No drain


Thank you for your attention !

And welcome to our Booth 402


Process Analyzer Sampling with Astute System IFPAC 2008 – Baltimore January 29,2008.

Documents

Transcript of Process Analyzer Sampling with Astute System IFPAC 2008 – Baltimore January 29,2008.