SC-PEM01

OPERATION MANUALVersion PEM01.03

Pro-EMEmergency lighting controller

L i f e s t y l e A u t o m a t i o n

IntroductionIntroduction to the Pro-EM® controller

Electrical specifications

InstructionsInstallation instructions

Pairing the Pro-EM® controllerPairing the Pro-Em® controller with the Pro-Em® IntelliHub®

Status LED light indicationFactory reset

Setting scheduled testingWeekly testMonthly test

Bi-annual test (optional) Annual test

Warranty & Support1. Troubleshooting

2. WarrantyI. What this warranty covers

II. What period does this warranty coverIII. What Silux Control® will do to correct any problems

IV. What is not covered by this warranty3. Support

4. Disclaimer of liability

T a b l e o f C o n t e n t s

PLEASE NOTE: You are not able to connect directly to the Pro-EM® controller. You will be required to connect directly to the Pro-EM® Intellihub® to ensure you can control all devices

via the Silux Control® app.

Introduction to the Pro-EM® controllerThe purpose of the Pro-EM® controller is to ensure your emergency lighting is kept at the healthiest status level without requiring human assistance or interventions, viewable from anywhere in the world.The Pro-EM® controller is a wireless, RF encrypted communication device with mesh connectivity suitable for any size installation or building. It provides complete compliance with statutory and mandatory requirements without human intervention.Selectable weekly, monthly, bi-annual (optional) and annual tests are available with date/time options and the ability to print hardcopy reports.The Pro-EM® controller’s integral 3 hour battery replaces the conventional EM relays and battery packs and involves a simple and rapid installation with no key switches required as the system runs automatically.

Electrical specifications

I n t r o d u c t i o n

Pro-EM IntelliHub Pro-Em

Controller

InputAdjustable OutputBattery Back-upTemperature controlUoutBattery Voltage (NiMH)Battery capacity (Ah)Teach Button

RF RangeNetwork

Radio FrequencyEncryption

LanguageOSApp

190~250V/AC 50/60Hz12~50V/DC± 3 hours 70ºC50V4.8V NiMH2.5Ah• Silux Control® network• Software teach available

100m open air & meshing up to 1kmSilux Control® RF proprietary encrypted with long range monitoring and full meshing capabilities 868MHZ (Adjustable frequency to meet different country legislations)Silux Control® RF proprietary meshing

English, others coming soonAndroid 4.0+, iOS 8.0+, Windows 7+Silux Control® can be integrated with other automation features of Silux Control®

230V

/AC

Driver

LED light

230V

/AC

Status

LEDInput

190~250V/A

C

LN

LED

Out

put

Ext.

Driv

erIn

put

Mo

de

l no

. SC-PEM

01Status Okay

Green

AC FailRed

Emergency Lighting ControllerPro-EM

1 2

35

4

WE RECOMMEND THAT YOU USE A QUALIFIED ELECTRICIAN TO INSTALL THESE PRODUCTS FOR YOU.

Installation instructionsStep 1. Please ensure the power to the device is OFF before installing this product.Step 2. Open the device.Important: Do not connect the battery and leave AC disconnected for more than 3 hours as the battery will go flat and not recover.Step 3. Connect 190~250V/AC coming from your mains to the INPUT terminal, namely live and neutral, on the Pro-EM® controller.Step 4. Connect 190~250V/AC coming from your mains to the INPUT terminal on the external driver.Please note: Always use the correct power cable thickness and type as per the electrical standards and regulations.Step 5. Wire the corresponding DC power supply wire to the LED light output terminal on the Pro-EM® controller and connect it to the DC power supply connector coming from the LED light.Step 6. Wire the corresponding DC power supply wire to the external driver input terminal on the Pro-EM® controller and connect to the DC power supply connector coming from the external driver.Step 7. Plug the female Molex connector on the end of the black status LED wire into the status LED male connector terminal on the Pro-EM® controller. The unit will be supplied with the battery terminals disconnected to ensure that the batteries are not discharged. Step 8. Connect the battery to the battery terminal inside the device.Step 9. Close the device.Step 10. Switch the mains power back ON.Mount the controller on an even surface or rest it on a non-conductive surface.

I n s t r u c t i o n s

Status

LEDInput

190~250V/A

C

LN

LED

Out

put

Ext.

Driv

erIn

put

Mo

de

l no

. SC-PEM

01

Status OkayGreen

AC FailRed

Emergency Lighting ControllerPro-EM

Status LEDStatus LED

230V/ACINPUT

External driverINPUT

LED lightOUTPUT

Female DC power supply connector Male DC power supply connector

Status LED light with female Molex connector

Antenna

Before continuing with pairing the Pro-EM® controller, please ensure that your Silux Control® app is installed and registered and your Pro-EM® IntelliHub® is paired to the Silux Control®

network (please refer to the Pro-EM IntelliHub OPERATION MANUAL). Please remember that the Pro-EM® IntelliHub® needs to be powered to be able to control the Pro-EM® controller

through the Silux Control® network via your smart device.

Pairing the Pro-Em® controller with the Pro-Em® IntelliHub®

Pairing the Pro-Em® controller with the Pro-Em® IntelliHub®

Step 1. Ensure that your Pro-Em® controller has power.Step 2. Open the Silux Control® app and, in the dropdown menu, tap “Add Device”.You will be given the option to “Add Hub Devices” or “Add WiFi Devices”. Tap “Add Hub Devices”.The Silux Control® network will automatically start the discovery process.Step 3. Find your Pro-Em® controller on your Silux Control® network and tap the “+” next to it.Step 4. Rename your device and enter the area where it is located. This makes it easier for you to find on your Silux Control® app.Step 5. Insert the MAC address or scan the QR code on the back of your device and tap “Save”. In the status bar, a message will be displayed stating “Device Saved Successfully”.

Status LED light indication1. Green only - Status ok, battery charged2. Green & Red - Status ok, battery charging3. Red only - Status ok, battery error4. Red Flashing (50% duty cycle) - No AC, load/LED ok Extra status:5. Green / Red Flashing (50% duty cycle) - No AC, load/LED error6. Red Flashing (10% duty cycle) - No AC, battery preservation mode7. Green flashing (10% duty cycle) - Test mode

Factory ResetThis function will remove all paired devices and restore the settings to the original state. Press and hold the teach button on the Pro-EM® controller for 5 consecutive seconds. On the 5th second, the light will flash 3 times. Your device will now be restored to its default state.

P a i r i n g t h e P r o - E M ® c o n t r o l l e r

Setting scheduled testingStep 1. On your home page, tap the Pro-EM® icon.Please note : Schedules should be created in order from weekly to annually. It is essential that you first create a weekly schedule before monthly etc. The app will automatically reposition the schedules if they are not done in the correct order, as shown.Step 2. Tap the “+” inside the square.Step 3. Tap the type of schedule you wish to set as seen below:· Weekly test: Select the day and start time the test should run on. The calender below will be displayed showing which days the schedule will run on.· Monthly test: Select which week, day and start time the test should run on.· Bi-annual test (optional): Select the month, week, day and start time the test should run on. The app will then automatically select the future dates with a gap of 6 months.· Annual test: Select the month, week, day and start time the test should run on. The app will then automatically select the future dates with a gap of 1 year.Step 4. Tap “Save”

Please note: Any changes to schedules, including retrieving schedules, during an automated test, may cause the attached light to flash.

Weekly test Monthly test Bi-annual test Annual test

S e t t i n g s c h e d u l e d t e s t i n g

1. TroubleshootingPlease visit our website at www.siluxcontrol.com/FAQ for a detailed list of all the Frequently Asked Questions.• Ensure that the power going to the device is on. • Ensure you have the latest app installed on your device and that you’re connected to your local network.• Ensure that your IntelliHub® is on and connected to your local network.• Ensure that this device is added to your device list when using the app.• Ensure that you have the correct device selected when using the app.

2. WarrantyI. What this warranty covers:Silux Control® warrants to the original purchaser of this Silux Control® product that the product shall be free from defects in design, assembly, material or workmanship under normal use and operation.Silux Control®‘s sole and exclusive obligation under the foregoing warranty shall be to repair or replace, at its option, any defective product that fails during the warranty period. The expense of removal and re-installation of any item is not included in this warranty.WARNING: Silux Control® and its distributors and resellers cannot be held responsible for any damages this product might have caused including 3rd party damages.

II. What period does this warranty cover: Silux Control® warrants this product for 12 months.

III. What Silux Control® will do to correct any problems:Silux Control® will repair or replace, at its option, any defective product free of charge (excluding shipping charges for this product).Silux Control® reserves the right to discontinue any of its products without notice and disclaims any limited warranty to repair or replace any such discontinued products.

IV. What is not covered by this warrantyUpon claiming this warranty, all above warranties are null and void if the purchased Silux Control® product is not returned for an authorized inspection, at the sole expense of the purchaser, or if Silux Control® determines that the Silux Control® product has been improperly installed, altered in any way or opened/tampered with. The Silux Control® product warranty does not protect against instances of uncontrollable natural disasters such as flood, lightning, earthquake, war, vandal-ism, theft, normal use wear and tear, erosion, depletion, obsolescence, physical damage, water damage, damage due to low voltage disturbances (i.e. brownouts or sags), non-authorized program or system equipment modification/alteration.

3. SupportPlease visit our website at www.siluxcontrol.com for any other support, products, future products, and updated user manuals.

4. Disclaimer of LiabilityPlease read this user manual thoroughly before using Silux Control® products. Follow all safety precautions when installing this product. It is always recommended to use a qualified electrician. Under no circumstances shall Silux Control® or its associates be liable for any direct, indirect, incidental, special or consequential damage that results from the use of or inability to use the Silux Control® products. By using any Silux Control® automation products, you expressly agree that the use of these products are at own risk. Neither Silux Control® nor its affiliates, subsidiaries, or designees nor each of their respective officers, directors, employees, agents, third party content providers, designers, contractors, distributors, merchants, sponsors or licensors can be held responsible for any injury, death or damages this product might have caused.

W a r r a n t y & S u p p o r t