We proudly present to Mozambique a partnership between

McWhit – Proud distributors for UniTwist and ProClose

UNITWIST & MCWHIT

What makes UniTwist Unique?Extremely easy to use – Quick Installations few tools

needed

Unbelievably well priced SOUTH AFRICAN & INTERNATIONAL PATENT

The ONLY PUSH-FIT COMPRESSION Fitting

Having the benefits of Both a Push-fit

And Compression Fitting- LEAK-PROOF!

Withstands 1000kgs of pressure And 100 Degrees of boiling water

IT HAS NO STREET VALUE

Quick, simple & innovativeCut the desired pipe length by Making a clean straight cut (90

degree angle). This is easily done using a pipe cutter or tool of choice.

Push pipe into fitting until you cannot see the mark or until the pipe is fully seated, hand tighten nut clockwise and then finish off

with a tool of choice.

Turn nut anti-clockwise one full turn to allow the grip ring to open up

allowing the pipe to be pushed into the fitting.

Mark the pipe 3.5cm from the end of the pipe. Push the pipe into the fitting mouth until it stops. The mark should not be available.

STEP 1

STEP 2

STEP 3

STEP 4

UniTwist is an SABS approved system

UniTwist can be used for HOT and Cold water

UniTwist’s unique compression action means even Scratched pipe is no match for UniTwist

If there is a leak- Just Tighten.

UniTwist is RE-USABLE

UniTwist with a Polycop combination

UniTwist Applications

OUTSIDE INSTALLATION

SHOWER INSTALLATION WITH PRO-CLOSE STOP TAP

TOILET & SHOWER INSTALLATION

UniTwist Applications

TOILET INSTALLATION

UniTwist is Compatable with most Pipes, including PVC, Copper and Polycop

UniTwist is compatible with both multi and monolayer PEX, PP-R and copper pipe or any pipe with imperial ½" or ¾" outer diameter.

1 size fits ALL

moves UP and DOWN

SUPER-STRONGBendable Legs

• 1 Fits 15mm and 16mm Pipe• 1 Fits 20mm and 22mm• Patented Design• Virgin Material means Legs can

bend without breaking!!• Metric and Imperial sizes are no

longer a problem

UniTwist Unique Patented Design

Extremely strong and Durable PPR NUT

304 stainless steel Grip Ring

Spacer

Compression O-Ring

McWhit is also proud to offer the completely new & unique

What makes PRO-CLOSE so Unique?

NO STREET VALUEVALUE FOR MONEY- Quality

& inexpensiveDESIGNED FOR HOT AND

COLD WATER USEUNSTRIPPABLE AND

EXTREMELY DURABLEMADE IN AFRICA FOR

AFRICA

NO STREET VALUE

NO MORE LOCKING UP & CAGING AWAY YOUR TAPS!!PRO-CLOSE is better than Brass Taps because:

Brass Taps are about 70% more expensive than Composite taps and Brass Taps sacrifice on average about 30% of their Brass Material to save costs, making for POOR Quality.

Scrap value for Brass taps are increasing all continuously, this causes the theft and selling of Brass to increase and its only getting worse.

Generally, when stolen, Brass taps are Smashed off with a Hammer and this causes water leakages and spillage and often this costs the government Millions every year!

WHAT MAKES PRO-CLOSE DIFFERENT?

MADE & PATENTED IN SOUTH AFRICA AND PROUD TO BE A WORLDS FIRST!

MADE FROM HIGH QUALITY ASYTLE MAKING PRO-CLOSE SUPER STRONG!!!

SMART DESIGN MEANS WASHER DOESN’T COMPRESS AND LASTS LONGER- NO LEAKING!

BUILT IN CLUTCH ACTS AS WATER HAMMER ARRESTOR- NO DAMAGE TO PIPES AND TAP!!

PRO-CLOSE RANGE

We Thank you For your Time

Contact details:

Damien Mclintock:

Cell: +27 82 3785 939

Email: damien@mcwhit.co.za

Alan Whitaker:

Cell: +27 79 2993 481

Email: alan@mcwhit.co.za

www.mcwhit.co.za