Pro-Bolt 2011 Catalogue
-
Upload
louisa-harker -
Category
Documents
-
view
229 -
download
7
description
Transcript of Pro-Bolt 2011 Catalogue
1
TITANIUM PARTS
sales 0044 (0) 1684 851940 www.pro-bolt .com2
10 20 30 40 50 60 70 80 90 100 110 120 130mm 1401
About us ...........................................................................................................................2
Ordering Information ...............................................................................................3
Measuring Assistance & Material Information ..........................................4
Pro-Gauge Measuring Tool ...................................................................................4
Product Profi les ............................................................................................................8
ALUMINIUM PARTSBolts ................................................................................................................................ 12
Nuts ................................................................................................................................. 14
Washers ........................................................................................................................ 14
Finishing Touches ................................................................................................... 16
METRIC STAINLESS STEEL PARTSBolts ................................................................................................................................. 18
Nuts & Washers ......................................................................................................... 20
TITANIUM PARTSBolts ................................................................................................................................ 22
Nuts ................................................................................................................................. 26
Washers ......................................................................................................................... 28
Rods ................................................................................................................................. 29
1/4 TURN QUICK RELEASE FASTENERS Quick Release Fasteners in all Materials ..................................................... 30
WORKSHOP KITS, TUBS, BOXES & CABINETSAluminium ................................................................................................................... 32
Stainless Steel ............................................................................................................ 34
Titanium ........................................................................................................................ 35
MOTORCYCLE PARTSFull Monty Kits .......................................................................................................... 36
Engine Kits .................................................................................................................. 38
Cam Cover Bolts ...................................................................................................... 39
Sump Bolts ................................................................................................................... 39
Oil Filler Caps ............................................................................................................. 40
Fairing Kits ................................................................................................................... 41
Quick Release Fairing Kits .................................................................................. 42
Screen Kits .................................................................................................................... 43
Fuel Cap Kits .............................................................................................................. 44
Bar Ends ........................................................................................................................ 45
Top Yoke Nuts ........................................................................................................... 46
Pre-Load Adjusters ................................................................................................ 47
Cable and Dial Adjusters .................................................................................... 48
Reservoir Caps & Reservoir Clips ................................................................... 49
Gear Shift Rods ........................................................................................................ 50
Paddock Stand Bobbins ...................................................................................... 50
Chain Adjuster Blocks .......................................................................................... 51
Chain Adjuster Bolts ............................................................................................. 51
Sprocket Nuts ........................................................................................................... 52
Axle Nuts, Bolts & Swingarm Nuts ............................................................... 54
Disc Rotor Bolts ........................................................................................................ 56
WELCOME to the Pro-Bolt 2011/12 Catalogue
CALIPER PARTSBleed Nipples ............................................................................................................. 58
Banjo Bolts ................................................................................................................... 59
Caliper Pins .................................................................................................................. 60
POPULAR STRESS AREA KITSFront Caliper Component Refurbishment Kits ...................................... 62
Race-Spec Radial Caliper Mount Bolt Kits ................................................ 62
Un-Sprung Weight Overhaul Bolt Kits ........................................................ 63
Front & Rear Caliper Mount Bolts Kits ......................................................... 64
Front & Rear Caliper Pinch Bolt Kits .............................................................. 64
Fork Axle Pinch Bolt Kits ...................................................................................... 65
Brake & Clutch Perch Pinch Bolt Kits ............................................................ 66
Handle Bar Bolt Kits ................................................................................................ 66
Top & Bottom Triple Clamp Bolt Kits ............................................................ 67
Rider & Pillion Footrest Hanger Bolt Kits .................................................... 67
Scratch & Spark Sets ............................................................................................... 68
Subframe Bolt Kits ................................................................................................... 68
MOTORCYCLE SPECIAL PARTS FOR: Aprilia .............................................................................................................................. 69
BMW ................................................................................................................................ 69
Ducati .............................................................................................................................. 70
Honda ............................................................................................................................. 71
Kawasaki ........................................................................................................................ 72
MV Agusta .................................................................................................................... 72
Suzuki .............................................................................................................................. 73
Yamaha .......................................................................................................................... 73
Ancillary Items .......................................................................................................... 74
UNC Stainless Steel ................................................................................................. 76
Parts suitable for Harley Davidson® Motorcycles ..........................78/79
Worldwide Distributors ........................................................................................ 80
Display Stands ........................................................................................................... 81
IND
EX
100%
POLISHED
STAINLESS STEEL
sales 0044 (0) 1684 851940 www.pro-bolt .com2
Established in 1999, Pro-Bolt is a family business based in the Cotswolds, England. We are the world-leading supplier of quality fasteners, motorcycle accessories, cycle parts and other components.
We have a large range of products manufactured in the best materials available. This, incorporated with unique design and easy fitment of kits, provides an unbeatable combination.
Our roots derive from all corners of the motorcycle industry, supplying products to customise, personalise, enhance looks and performance – offering an excellent alternative to lost, rusty or simply heavy bolts. From Streetfighters to Race Bikes, Enduro, Trail or Scooters, you’ll find our brochure packed with imaginative, exciting and sexy products to improve your machine.
We supply Aluminium, Stainless Steel and Titanium, all offering their own strengths and benefits and each suitable for different applications.
Aluminium and Titanium products suit any market where looks and weight are crucial to ensure success. As the world’s largest stockist of top quality Titanium fasteners, our product is in strong demand by Race Teams – British Superbikes Teams, World Superbike Teams and Moto GP Teams all use Pro-Bolt. This reliability of both service and product is proven on the track to serve you well on the road.
Our range of Stainless Steel fasteners has proven a great success with products continually developing and growing. The unique design of the heads and quality of thread and finish is unparalleled. Each product is polished to a mirror finish.
Having such an extensive range of fasteners in the most attractive materials means our products are distributed and used worldwide in many diverse industries. We supply fasteners for Motorcycles, Formula 3,Quad Bikes, Kart Kits, Cycle Sets, ATV’s, Powerboats, Model Making, Yachting, Wheelchairs, Furniture and for many Marine applications.
Pro-Bolt produce a separate catalogue containing many specialist products for the Cycle Market and Off-Road Bikes. These are available on request and can also be downloaded on-line via www.pro-bolt.com.
Our expertise in polishing has opened up the market for cruisers which has traditionally been the domain of Chrome. Unfortunately, Chrome is only a coating and as such is prone to chipping, peeling and flaking even at the point of fitment. Unlike Chrome, our highly polished Stainless Steel offers strength along with an exceptional finish. Our new range of UNC bolts are available in unique head designs with rolled threads for added strength. We also now offer aftermarket model specific bolt kits suitable for Harley-Davidson® Motorcyles. Our fasteners exceed D.O.D, M.O.T and factory standards.
As with any successful company our biggest strength is our staff and our dedicated team of enthusiasts is on hand to provide you with the very best technical support.
Pro-Bolt has undertaken to achieve ISO9001-2008 and engaged a recognised Consultant Company to assist with this process. With the standards we already have in place we believe this will be achieved by September 2011. For clarification please refer to our website or contact us directly.
We specialise in offering many ‘specific kits’ thus our motto:
ABOUT US
HISTORY
and as such is prone to chipping, peeling and flaking even at the point of fitment. Unlike Chrome, our highly polished Stainless Steel offers strength along
10 20 30 40 50 60 70 80 90 100 110 120 130mm 1403
CONTACT INFORMATIONOffice hours: Monday-Thursday 8.30 - 5.00 Friday 8.00 - 4.00 (Answerphone out of hours)Telephone: +44 (0) 1684 851940Fax: +44 (0) 1684 850080E-mail: [email protected]: www.pro-bolt.comPost: Pro-Bolt Ltd, Unit F, 6400 Severn Drive, Tewkesbury Business Park, Tewkesbury, Glos GL20 8SF, UK.
ORDERING• Visit one of our UK Stockists: See the quality of our products
first hand. Phone for information or see our ‘dealer’ page via www.pro-bolt.com
• Phone, fax or post: See above contact information
• On-line: www.pro-bolt.com
ON-LINEDuring UK office hours our on-line support feature is available. This live feature enables us to answer questions, confirm stock availability,
provide advice and assist with navigating our website.
If you are part of social networking, be the first to find out about our latest products and events by becoming a fan on Facebook. You can also find out about our products on YouTube. Our range is constantly evolving with new products which are
regularly added to our website and broadcast on Facebook.
GLOBAL WEBSITESPro-Bolt has global websites based in several countries around the world, offering local sales support and advice using local language and currency. Please see our main website for details.
DELIVERY OPTIONSWe aim to deliver from stock in 1-2 days, but please allow 3 days before progressing your order. Delivery Options available are:
• 1st Class Post: Deliveries requested 1st Class Post are not traceable and Pro-Bolt is not responsible for lost in transit or non-delivery.
• Royal Mail Signed for: Signed Proof of Delivery is available once delivered, but this is non-traceable
• Courier: Fully traceable courier service
• Guaranteed Next Day: Deliveries before 9.30am and/or 1pm are available depending on delivery address
PRICE LISTS & FITMENT GUIDESThis catalogue is supplied with a separate Price List giving prices for individual bolts, packs, boxes and kits. Due to volatile material prices, Pro-Bolt reserves the right to change prices and discontinue products without notice. All retail prices in our Price List include VAT and are in Pounds Sterling. VAT will not be charged to retail customers outside of the EU. VAT will not be charged to registered business outside the EU, or in the EU if a valid VAT number is provided on placement of order.
Where you see this symbol you should refer to our model specific fitment guide, as this is a product we measure & check.
PAYMENT METHODSCredit or Debit Cards: Please have your card ready. We accept MasterCard, Visa, Delta, Solo, Maestro and American Express.Cheques: Payable to ‘Pro-Bolt’. Please allow 7 working days from receipt of cheque to allow clearance. Money Orders / Bank Drafts: On receipt of a Pro-Bolt pro-forma invoice, please send payable to ‘Pro-Bolt’ quoting your order number. PayPal: We can accept payment by PayPal – please ring for details.Bank Transfers: Pro-Bolt are able to offer pricing in Pounds Sterling, Euros or US Dollars – please contact us for relevant information.
SHORTAGES/DAMAGED GOODSMissing parts or damaged goods must be advised within 48 hours of receipt. Please retain evidence of damaged packaging.
DISCONTINUED PRODUCTSWe may at any time discontinue products as we see fit.
RETURNSTo return a product, please contact us for a Returns Reference Number within 28 days of purchase. No goods will be accepted without a Returns Reference. Returned goods, supplied correctly, will be subject to a 10% restocking charge. Our freepost address is: Returns, Pro-Bolt Ltd, FREEPOST SWC4834, Severn Drive, Tewkesbury Business Park, Tewkesbury, Glos. GL20 8SF, UK.
ACU DISCOUNTSPro-Bolt offer registered ACU racers a 10% discount throughout our range. When ordering, please have your registration details to hand.
UK STOCKIST & DEALERSPro-Bolt has a network of Stockists who hold a wide range of our products - they will also order in specific kits and accessories for you. A list of Stockists can be found on our website. In addition we have a large number of registered Dealers who also supply and fit our products – from Tuning Shops and Engineering Companies to High Street Shops. Only registered businesses that re-sell products qualify for discounts. If you are interested in becoming a Stockist or Dealer, please contact [email protected].
OVERSEAS DISTRIBUTORSPro-Bolt has a worldwide network of Distributors – please see page 80 for details. Our website www.pro-bolt.com lists the most up to-date information. If you are interested in becoming a Distributor of our products, please contact [email protected].
TRADEMARKSApriliaTM, BMWTM, BremboTM, CagivaTM, DucatiTM, Harley-Davidson®, KawasakiTM, MV AgustaTM, NissinTM, SumitomoTM, SuzukiTM, TokicoTM, TriumphTM, YamahaTM are registered trademarks, here used only as a reference.
PRO-BOLT COPYRIGHTPro-Bolt is a registered trade mark. Photography and the information present in this catalogue are the property of Pro-Bolt. All rights are reserved.
ORDERING INFORMATION
OR
DE
RIN
G IN
FO
sales 0044 (0) 1684 851940 www.pro-bolt .com4
ORDERING INDIVIDUAL BOLTSAll fasteners are available individually in any quantity. When ordering we offer the following advice and general information to assist. Our individual bolt part numbers detail the actual product as follows in this sequence.
• Material Aluminium, Stainless Steel or Titanium.
• Head Style Flanged Hex Head, Tapered Socket Cap, Countersunk etc.
• Shank Diameter M8 (8mm), M10 (10 mm), etc.
• Shank Length Measured from beneath the head (with the exception of countersunk bolts - where length includes the head).
• Thread Pitch (if other than standard) The distance from the crest of one thread to the next.
• The Colour Finish (if available/required) Aluminium: Black, Blue, Gold, Gunmetal Grey, Orange,
Purple, Red & Silver Stainless Steel: Polished Finish Titanium: Natural Finish, Blue, Gold & Purple Haze.
• Quantity Required
• Part Numbers TIHX835G Titanium Flanged Hex Head, M8 Thread Diameter x 35mm length under the head in gold.
LSSCS625 Stainless Steel Countersunk Bolt, M6 Thread Diameter x 25mm long.
PRO GAUGE MEASURING TOOL – A USEFUL AID Take the guesswork out of measuring Metric bolts. We offer a Pro-Gauge to make measuring easier, you’ll find it an essential tool box item.
• Teeth for Gauging Thread Pitch 0.7mm – 1.75mm teeth to match to your original bolts.
• Holes to Gauge Thread Diameter M4 to M12. The smallest hole which the bolt will fit through cleanly, without screwing it through, gives the thread diameter.
• To Measure Length of Bolt Place the under head of bolt to the edge of the tool to obtain the length of your original bolts (with the exception of countersunk bolts where the length should include the head).
MEASURING ASSISTANCE AND MATERIAL INFORMATION
Diameter M3 M4 M5 M6 M8 M10 M10 fine
M12 M12 fine
M12 x fine
Pitch (mm) 0.5 0.7 0.8 1.00 1.25 1.50 1.25 1.75 1.50 1.25
GENERAL THREAD INFORMATIONShorter bolts of 25mm or less will usually be fully threaded, whilst longer bolts usually have a grip length and 25mm of thread. The thread pitch of a standard metric screw corresponds to the bolt diameter. It is the distance from one peak of the thread to the next. A metric screw thread is specified by how far in millimetres it advances in one turn of the screw. For example, if one turn brings it 1mm closer, then it is a 1mm pitch. These are the industry standard thread pitches:
For fasteners where the head usually sits above the surface, the measurement is taken from directly under the head to the end of the fastener. For fasteners that are designed to be countersunk, the measurement is made from the flat of the head (where the surface of the material is), to the end of the fastener.
BOLT CONFIGURATIONHeadThe head is designed to provide a wrenching surface to tighten the bolt to the correct preload. Its size of bearing area depends on the stress level and the hardness of the material being fastened. There must be enough bearing surface to prevent indentation of the material under preload. To minimise the effects of fatigue, a bolt should be tightened or preloaded to an initial clamping load in excess of the maximum working load of the joint.
FilletThis area of structural discontinuity is a critical point of stress concentration. The radius where head and shank meet must be smooth and free from flaws. It should be as large as practical and still provide the necessary bearing area under the head.
Grip LengthMinimum grip length from protruding head bolts shall not be less than the head-to-shank fillet radius.
ShankThe shank must be fully concentric with the thread and with the head. To reduce bending moments, the angle between head and shank axis must be kept to a minimum. The fit between bolt shank and mating hole must be kept to a very close tolerance to maximise shear strength.
Thread & PitchThe two most critical thread factors for high strength/high fatigue rating are a generous root radius to minimise notch effect and compressive pressurising achieved by rolling threads after heat treatment. The pitch diameters must also be closely controlled for high fatigue applications. Where lock nuts will be used, thread point chamfer must be kept to a minimum. Where thread run-out flares into the shank, there should be no abrupt changes in the cross sectional area.
Overall Length
Head Height
Grip LengthThread Length
Shank Diameter Fillet
MATERIAL INFO
10 20 30 40 50 60 70 80 90 100 110 120 130mm 1405
ALUMINIUM
To customise your machine, we off er a wide range of fasteners and accessories. This ever increasing range allows you to create a unique look and style. You can customise your machine little by little, or make large-scale changes; either way you will be guaranteed colour consistent parts throughout that are machined to a high quality smooth fi nish. We off er model specifi c kits for Motorcycles, Cycle Sets and Rocker Cover Kits. Our lightweight bolt kits are available for a huge number of bikes, enabling you to change Engine Casing Bolts, Fairing Bolts, Screen Bolts and Fuel Cap Surround Bolts with no need to measure your originals - we’ve done it for you! Whichever bike you ride you are sure to fi nd goodies that are fun, functional and make your bike unique and stand out from the crowd. All our kits and accessories are available in a choice of Black, Blue, Gold, Gunmetal Grey, Orange, Purple, Red and Silver.
• Manufacturing process: Head: cold formed; Shank: thread rolled.
• Anodising: Chemically brightened and colour anodised to between 8 and 12 microns thick.
• Weight: 60% lighter than steel – 40% lighter than Titanium.
• Corrosion: Saltwater, road fi lm or mild acids do not aff ect anodised aluminium.
• Application: Aluminium is suitable for use in all non-safety critical areas – mudguards, screens, fairings, engine casings, huggers, fuel caps, number plates, lamp units, exhaust cans, heel plates, exhaust manifold brackets, fuel cap surround, air filter, car rocker covers, plus many more. Aluminium is not suitable for any stress area applications. If you are in any doubt as to the suitability of our products for your machine, or the size you need, please contact Pro-Bolt direct.
MATERIAL PROPERTIES• Density: ......................................................................................2730 kg/m3 (170lb/ft3)• Young’s Modulus: ................................................................... 72GPa (10.4 x 106psi)• Yield Strength: ........................................................................505MPa (73.2 x 103psi)• Ultimate Tensile Strength: ...............................................570MPa (82.7 x 103psi)• Compressive Strength: ......................................................505MPa (73.2 x 103psi)• Shear Modulus: .......................................................................27GPa (3.92 x 106psi)• Shear Strength: ..................................................................... 330MPa (47.9 x 103psi)• Ductility: ...............................................................................10% elongation at break• Poisson’s Ratio: ............................................................................................................... 0.33• Hardness: .............................................................................................................150 Brinell• Strength-to-Weight Ratio: ..................................................................... 185 kNm/kg• Stiffness-to-Weight Ratio: .................................................................. 26.4 MNm/kg
Thread Diameter
Material Tensile Stress Area (mm2)
Max Load (kN)
Total Elongation (mm)
6mm 20.1 11.58 0.56
8mm 36.6 23.19 0.62
10mm 58.0 39.17 1.05
MA
TE
RIA
L IN
FO
ALL AVAILABLE IN A CHOICE OF 8 COLOURS: BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
Aluminium
Torque & Lubrication: Where we offer model specific replacement Bolt Kits, Aluminium is a softer and weaker alternative to the original bolts being replaced, so a lower torque is required to prevent damage to your Pro-Bolt fastener.
Where individual bolts are purchased, torque guides vary depending on the material, manufacturing method, thread diameter, pitch and head style. This torque information can be supplied on request, or downloaded via www.pro-bolt.com in a separate document entitled ‘Material Information’ wherever you see the icon shown here.
For general use fasteners we recommend an anti-seize or a copper based lubricant be applied to the threads in order to prevent seizing.
If you are in any doubt as to the suitability, torque settings of our products for your specific application, please do not hesitate to contact us prior to fitment.
sales 0044 (0) 1684 851940 www.pro-bolt .com6
STAINLESS STEEL
Fit & Forget! Manufactured from 316 Stainless Steel, which is superior in strength and corrosion resistance, we are proud to offer an exceptional quality product. Pro-Bolt is the first to provide Tapered Socket Caps, Flanged Hex Heads and Domed/Mushroom Fairing Bolts. We are offering a quality grade material in unique head styles – and to a polished mirror finish. Absolutely no polishing is required. Forget rough nuts and take a close look at our buffed nuts! No stamp marks in the bolt heads or cracked and grainy finishes. No matter how many dark winter nights you spend polishing mass-produced lesser quality bolts, you will never achieve the quality of finish and material we offer. Please be aware that not all Stainless Steel is suitable for stress areas. However, our 316 Stainless Steel is suitable for Engine Casings, Fairings, Screens, Front Axle Pinch Bolts, Caliper Pinch Bolts, Caliper Mount Bolts, Footrest Hanger Bolts, Clip-On Handle Bar Bolts, Brake/ Clutch Pinch Perch Bolts, Top/Bottom Yoke Clamp Bolts. Also available are 1/4 Turn D-Ring Quick Release Fasteners, 1/4 Turn Allen Key Drive Quick Release Fasteners, Brake Caliper Pad Pins, Axle Nuts, Banjo Bolts, Bleed Nipples and Motorcycle Disc Rotor Bolts.
• Material specification – 316.
• Manufacturing process: We manufacture in a single process on multi axis CNC machining centres, which includes thread rolling. Thread standards are to BS3692:1967 which is the British Standard for ISO Precision Metric Threads. Route radii vary between 0.8mm and 0.4mm. This is the maximum that we can use and improves shear strength. Thread lead varies between K1 and K2.
The head and shank are Pro-Bolt’s own designs, which have been successfully tested in the field for the last four years.
• Stainless Steels are iron alloys with a minimum of 10.5% Chromium with other elements (Nickel, Molybdenum, Titanium, Copper, Carbon, Nitrogen) added to enhance properties such as formability and strength. It is the chromium-rich, oxide film that gives the corrosion resistance of Stainless Steel. This protective film is strong and chemically stable (i.e. passive) where there is sufficient oxygen on the surface. This protection is extremely thin and will usually self-repair if sufficient oxygen is available. Please note: Under certain conditions the passive state can be broken down and corrosion can result.
• Heat Resistance: 316 has good resistance to oxidation in continuous service to 870oC and intermittent service to 925oC. However, continuous use at 425-860oC is not recommended due to its resistance to carbide precipitation. Where high strength is required at temperatures above 500oC, Grade 316H is recommended.
• Alloy Designations: Stainless Steel 316 corresponds to the following standard designations and specifications:
MATERIAL PROPERTIES• Density: ...................................................................................... 8030 kg/m3 (501lb/ft3)• Young’s Modulus: .......................................................................193GPa (28 x 106psi)• Yield Strength: ........................................................................ 260MPa (37.7 x 103psi)• Ultimate Tensile Strength: ............................................... 570MPa (82.7 x 103psi)• Compressive Strength: ...................................................... 260MPa (37.7 x 103psi)• Shear Modulus: .........................................................................78GPa (11.3 x 106psi)• Ductility: .......................................................................... 40% elongation at break +• Minimum value allowed by ...................................................................ASTM A240• Poisson’s Ratio: ................................................................................................................0.27• Hardness: .................................................................................................95 Rockwell B +• Maximum value allowed by ..................................................................ASTM A240• Strength-to-Weight Ratio: ..................................................................... 32.4kNm/kg• Stiffness-to-Weight Ratio: ...................................................................... 24 M Nm/kg
Thread Diameter
Material Tensile Stress Area (mm2)
Max Load (kN)
Total Elongation (mm)
6mm 20.1 16.40 1.93
8mm 36.6 29.15 2.85
10mm 58.0 46.89 3.70
MATERIAL INFO
ALL AVAILABLE IN POLISHED STAINLESS
Stainless Steel
Torque & Lubrication: Where we offer model specific replacement Bolt Kits please, use your manufacturer’s recommended torque settings. Disc Rotor Bolts are the only exception and have a lower setting which we specify in the product packaging.
Where individual bolts are purchased, torque guides vary depending on the material, manufacturing method, thread diameter, pitch and head style. This torque information can be supplied on request, or downloaded via www.pro-bolt.com in a separate document entitled ‘Material Information’ wherever you see the icon shown here.
For general use fasteners, we recommend an anti-seize or a copper based lubricant be applied to the threads in order to prevent galling, the exception being bleed nipples and banjo bolts which should be fitted dry. For bolts in safety critical areas, we recommend a medium strength threadlock.
If you are in any doubt as to the suitability, torque settings of our products for your specific application, please do not hesitate to contact us prior to fitment.
ALL AVAILABLE IN A CHOICE OF 4 COLOURS: BLUE • GOLD • NATURAL • PURPLE HAZE
Titanium
10 20 30 40 50 60 70 80 90 100 110 120 130mm 1407
TITANIUM
MATERIAL PROPERTIESMaterial Information• Density: ......................................................................................4420 kg/m3 (276lb/ft3)• Young’s Modulus: ...................................................................... 110GPa (16 x 106psi)• Yield Strength: ....................................................................... 828 MPa (120 x 103psi)• Ultimate Tensile Strength: .............................................1030MPa (149 x 103psi)• Compressive Strength: .......................................................960MPa (139 x 103psi)• Shear Modulus: ........................................................................ 43GPa (6.24 x 106psi)• Ductility: ...............................................................................10% elongation at break • Poisson’s Ratio: ............................................................................................................... 0.34• Hardness: .....................................................................................................36 Rockwell C• Maximum value allowed by ................................................................. ASTM A240• Strength-to-Weight Ratio ........................................................................187kNm/kg• Stiffness-to-Weight Ratio ......................................................................24.9MNm/kg
Thread Diameter
Material Tensile Stress Area (mm2)
Max Load (kN)
Total Elongation (mm)
6mm 20.1 21.25 0.54
8mm 36.6 36.78 0.48
10mm 58.0 53.53 1.45
MA
TE
RIA
L IN
FO
Made from aircraft grade Titanium 6AL-4V (grade 5), the outstanding benefits are that we roll the threads to produce greater fatigue strength and reduce galling. These bolts are in excess of 120,000psi ultimate tensile strength, suitable to replace both Grade 5 and Grade 8 steel bolts. We carry the UK’s widest range of products for the automotive industry. We offer Flanged Hex Head, Tapered Socket Cap, Countersunk, and Dome Head Bolts, Nuts and Washers – from 3mm to 12mm. We also offer Axle Nuts, Swingarm Nuts, Yoke Nuts, Caliper Pins, Banjo Bolts, Disc Bolts and many more specifically machined items. For motorcyclists we have made it so easy to replace bolts in stress areas by doing all the measuring for you, and offering the relevant fasteners in kit form. All our Titanium nuts, bolts, washers and specially machined items are available in natural, blue, gold and purple haze, with the exception of our Race-Spec range which has a factory finish.
• Ti-6Al-4V, an alloy introduced in 1954, is a good general purpose grade. Titanium alloy is available in all product forms. Its density is 0.160 pounds per cubic inch. It can be heat-treated to ultimate strengths in excess of 170,000psi and responds to heat treatment in sections up to 15mm. This alloy is stable at temperatures ranging from 423oF to over 1000oF.
• Manufacturing process: We manufacture in a single process on multi axis CNC machining centres, which includes thread rolling. Thread standards are to BS3692:1967 which is the British Standard for ISO Precision Metric Threads. Route radii vary between 0.8mm and 0.4mm. This is the maximum that we can use and improves shear strength. Thread lead varies between K1 and K2.
• Other Items: Machined from bar.
• Weight: 42% lighter than steel.
Torque & Lubrication: Where we offer model specific replacement Bolt Kits please, use your manufacturer’s recommended torque settings. Disc Rotor Bolts are the only exception and have a lower setting which we specify in the product packaging.
Where individual bolts are purchased, torque guides vary depending on the material, manufacturing method, thread diameter, pitch and head style. This torque information can be supplied on request, or downloaded via www.pro-bolt.com in a separate document entitled ‘Material Information’ wherever you see the icon shown here.
For general use fasteners, we recommend an anti-seize or a copper based lubricant be applied to the threads in order to prevent galling, the exception being bleed nipples and banjo bolts which should be fitted dry. For bolts in safety critical areas, we recommend a medium strength threadlock.
If you are in any doubt as to the suitability, torque settings of our products for your specific application, please do not hesitate to contact us prior to fitment.
sales 0044 (0) 1684 851940 www.pro-bolt .com8
M8 (1.25)
M6 (1.00)
M5 (0.8)
M4 (0.7)
M3 (0.5)
Note: Not all sizes are available in ALL materials, please refer to relevant material section.
Standard Allen Key Socket Cap Bolts
M5 (0.8)
45 50 55 60 65 70 75 80
M10 (1.50) also available in fine (1.25) pitch
M8 (1.25)
M6 (1.00)
Tapered Socket Cap Bolts
M4 (0.7)
PRODUCT PROFILES
M7 (1.00)
10 20 30 40 50 60 70 80 90 100 110 120 130mm 1409
M5 (0.8)
M6 (1.00)
M8 (1.25)
M10 (1.50) • also available in fine (1.25) pitch• longer lengths available in fine (1.25) pitch
Flanged Hex Head Bolts
M4 (0.7)
M8 (1.25 )
M4 (0.7) M6 (1.00)M5 (0.8)
Countersunk Bolts
M8 (1.25)
16 mm
12 mm M5 (0.8)
8 mm M4 (0.5/0.7)
M6 (1.00)
16 mm
Dome Head/Fairing Bolts
M6 (1.00)
12 mm
18 mm M10 (1.25)
M5 (0.8)
16 mm
M12 (1.25)
PR
OD
UC
T P
RO
FIL
ES
sales 0044 (0) 1684 851940 www.pro-bolt .com10
M10
20 mm
M8
16 mm
M6
23 mm10 mm
M5
13 mm
M6 22 mm
M8 25 mm
M6
19 mm
M5
Flat Washers
Drilled Washers
Countersunk Bodywork Washers
M8
16 mm
15 mm
M5
M10
20 mm
M12
24 mm
7 mm
M3
10 mm
M5
20 mm
M5
M14
28 mm
M4
9 mm
PRODUCT PROFILES
Note: Not all sizes are available in ALL materials, please refer to relevant material section.
M8
20 mm
12 mm
M6 M12
25 mm
12 mm
M6 M6
18 mm15 mm
M6 M6
20 mm
M6
25 mm
M6
30 mm
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14011
Break Edge45o x 0.5
C
D
Race Spec Bolts
Race Spec Bodywork Bolts
16 mm M8 (1.25)
25
15 mm
252015
M8 (1.25)
28
3032
40 45 50 55 60 65 70 75 80 85 9035
20
M7 (1.00)
40 50 60 80
11 mm
17 mm
2520
M10 (1.25)
30 40 45 50 55 60 65 70 75 80 9035
PR
OD
UC
T P
RO
FIL
ES
16 mm M6 (1.00)
30201612 25
11 mm
25201012
16
15
14
M6 (1.00)
18 22 28
3032
40 45 50 55 60 65 70 75 80 8535
10 mm
252010 15
M5 (0.80)
12
3530
M5 (0.80)
16
12 mm
12 25
sales 0044 (0) 1684 851940 www.pro-bolt .com12
Standard Allen Key Socket Cap Bolts
BOLTS
Part Number Thread & Pitch Length
LPB308 M3 x 0.5mm 8mm
LPB310 M3 x 0.5mm 10mm
LPB330 M3 x 0.5mm 30mm
LPB335 M3 x 0.5mm 35mm
M3 Thread Diameter (2mm Allen Key) Length measurements are taken from below the head
Part Number Thread & Pitch Length
LPB410 M4 x 0.7mm 10mm
LPB420 M4 x 0.7mm 20mm
LPB435 M4 x 0.7mm 35mm
M4 Thread Diameter (3mm Allen Key) Length measurements are taken from below the head
Part Number Thread & Pitch Length
LPB610 M6 x 1.00mm 10mm
LPB612 M6 x 1.00mm 12mm
LPB616 M6 x 1.00mm 16mm
LPB620 M6 x 1.00mm 20mm
LPB625 M6 x 1.00mm 25mm
LPB630 M6 x 1.00mm 30mm
LPB635 M6 x 1.00mm 35mm
LPB640 M6 x 1.00mm 40mm
LPB645 M6 x 1.00mm 45mm
LPB650 M6 x 1.00mm 50mm
LPB655 M6 x 1.00mm 55mm
LPB660 M6 x 1.00mm 60mm
LPB665 M6 x 1.00mm 65mm
LPB670 M6 x 1.00mm 70mm
LPB675 M6 x 1.00mm 75mm
LPB680 M6 x 1.00mm 80mm
LPB685 M6 x 1.00mm 85mm
LPB690 M6 x 1.00mm 90mm
LPB695 M6 x 1.00mm 95mm
LPB6100 M6 x 1.00mm 100mm
M6 Thread Diameter (5mm Allen Key) Length measurements are taken from below the head
ALUMINIUM PARTS
Available individually or in packs of 5/10
M5 Thread Diameter (4mm Allen Key) Length measurements are taken from below the head
Part Number Thread & Pitch Length
LPB508 M5 x 0.8mm 8mm
LPB510 M5 x 0.8mm 10mm
LPB512 M5 x 0.8mm 12mm
LPB516 M5 x 0.8mm 16mm
LPB520 M5 x 0.8mm 20mm
LPB525 M5 x 0.8mm 25mm
LPB530 M5 x 0.8mm 30mm
LPB540 M5 x 0.8mm 40mm
LPB545 M5 x 0.8mm 45mm
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14013
Part Number Thread & Pitch Length Allen Key Size
LCS415 M4 x 0.7mm 15mm 2.5
LCS420 M4 x 0.7mm 20mm 2.5
LCS445 M4 x 0.7mm 45mm 2.5
LCS450 M4 x 0.7mm 50mm 2.5
LCS520 M5 x 0.8mm 20mm 3
LCS530 M5 x 0.8mm 30mm 3
LCS535 M5 x 0.8mm 35mm 3
LCS615 M6 x 1.00mm 15mm 4
LCS625 M6 x 1.00mm 25mm 4
LCS635 M6 x 1.0mm 35mm 4
LCS820 M8 x 1.25mm 20mm 6
LCS840 M8 x 1.25mm 40mm 6
Countersunk Bolts Length measurements include the head
Part Number Thread & Pitch Length
LPB812 M8 x 1.25mm 12mm
LPB820 M8 x 1.25mm 20mm
LPB825 M8 x 1.25mm 25mm
LPB830 M8 x 1.25mm 30mm
LPB835 M8 x 1.25mm 35mm
LPB840 M8 x 1.25mm 40mm
LPB860 M8 x 1.25mm 60mm
M8 Thread Diameter (6mm Allen Key) Length measurements are taken from below the head
Part Number Thread & Pitch Length
LH465 M4 x 0.7mm (10mm head diameter) 6.5mm
LH420 M4 x 0.7mm (10mm head diameter) 20mm
Honda Special Fuel Cap Bolts Length measurements are taken from below the head
Part Number Thread & Pitch Length Allen Key Size
LFB412F M4 x 0.5mm (8mm head) 12mm 2.5
LFB412 M4 x 0.7mm (8mm head) 12mm 2.5
LFB425 M4 x 0.7mm (8mm head) 25mm 2.5
LFB512 M5 x 0.8mm (12mm head) 12mm 3
LFB516 M5 x 0.8mm (12mm head) 16mm 3
LFB516XL M5 x 0.8mm (16mm head) 16mm 3
LFB520 M5 x 0.8mm (12mm head) 20mm 3
LFB525 M5 x 0.8mm (12mm head) 25mm 3
LFB610 M6 x 1.00mm (16mm head) 10mm 4
LFB616 M6 x 1.00mm (16mm head) 16mm 4
LFB620 M6 x 1.00mm (16mm head) 20mm 4
LFB620XS M6 x 1.00mm (12mm head) 20mm 4
LFB625 M6 x 1.00mm (16mm head) 25mm 4
LFB630 M6 x 1.00mm (16mm head) 30mm 4
LFB630XS M6 x 1.00mm (12mm head) 30mm 4
LFB635 M6 x 1.00mm (16mm head) 35mm 4
LFB640 M6 x 1.00mm (16mm head) 40mm 4
LFB825 M8 x 1.00mm (16mm head) 25mm 4
LFB840 M8 x 1.00mm (16mm head) 40mm 4
Dome Head/Fairing Bolts Length measurements are taken from below the head
ALL AVAILABLE IN A CHOICE OF 8 COLOURS: BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
Aluminium
AL
UM
INIU
M
sales 0044 (0) 1684 851940 www.pro-bolt .com14
NUTS
Part Number Thread & Pitch Socket SizeLFN5 M5 x 0.8mm 8mm
LFN6 M6 x 1.00mm 10mm
LFN6LH (Left Hand Thread) M6 x 1.00mm 10mm
LFN8 M8 x 1.25mm 13mm
Full Nuts
Part Number Thread & Pitch Socket SizeLNYN4 M4 x 0.7mm 7mm
LNYN5 M5 x 0.8mm 8mm
LNYN6 M6 x 1.00mm 10mm
LNYN8 M8 x 1.25mm 13mm
Nyloc Nuts
Part Number Thread & Pitch Socket Size HeightLDOMENUT4 M4 x 0.7mm 7mm 8mm
LDOMENUT5 M5 x 0.8mm 8mm 10mm
LDOMENUT6 M6 x 1.00mm 10mm 12mm
LDOMENUT8 M8 x 1.25mm 13mm 15mm
LDOMENUT10F M10 x 1.25mm 17mm 18mm
LDOMENUT10 M10 x 1.50mm 17mm 18mm
Dome Nuts
WASHERS
Part Number Inside Diameter
Outside Diameter
Thickness
LWA3 M3 7mm o/d 0.55mm
LWA4 M4 9mm o/d 0.80mm
LWA5 M5 10mm o/d 0.90mm
LWA6 M6 12mm o/d 1.40mm
LWA6-18 M6 18mm o/d 1.40mm
LWA8 M8 16mm o/d 1.50mm
LWA8-20 M8 20mm o/d 1.60mm
LWA10 M10 20mm o/d 1.77mm
Flat Washers
Drilled WashersPart Number Inside
Diameter Outside Diameter
Thickness
LWAD5 M5 10mm 1.30mm
LWAD6 M6 12mm 1.50mm
LWAD6-23 M6 23mm 1.50mm
LWAD8 M8 16mm 1.90mm
LWAD10 M10 20mm 2.80mm
LWAD12 M12 25mm 3.40mm
Countersunk Bodywork WashersPart Number Inside
Diameter Outside Diameter
Thickness
LWAC5 M5 13mm o/d 3.20mm
LWAC6-19 M6 19mm o/d 3.40mm
LWAC6-22 M6 22mm o/d 3.40mm
LWAC8 M8 25mm o/d 5.00mm
Flared WashersPart Number Inside
Diameter Outside Diameter
Thickness
LWAPB625 M6 25mm o/d 7.00mm
Manufactured to be fitted with a 6mm standard socket cap bolt
ALUMINIUM PARTS
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14015
AL
UM
INIU
M
ALL AVAILABLE IN A CHOICE OF 8 COLOURS: BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
AluminiumRACE-SPEC BOLTS
New Bolt Range in 7075 Aluminium machined with Rolled Threads for superior strength. Our Race Spec bolts are widely used by Racers, enthusiasts and those who like attention to detail. The heads are pre-drilled on the fl ats for ease of lockwiring and etched with the Pro-Bolt name. Our Aluminium Race Spec Bolts represent an outstanding 62% weight saving over equivalent sized steel bolts.
Part Number
Thread/ Pitch Length Thread
Length Flange Diameter
Socket Size
LHX510R M5 x 0.8mm 10mm 10mm 10mm 7mm LHX512R M5 x 0.8mm 12mm 12mm 10mm 7mm LHX516R M5 x 0.8mm 16mm 16mm 10mm 7mm LHX520R M5 x 0.8mm 20mm 20mm 10mm 7mm LHX525R M5 x 0.8mm 25mm 25mm 10mm 7mm LHX530R M5 x 0.8mm 30mm 25mm 10mm 7mm LHX535R M5 x 0.8mm 35mm 25mm 10mm 7mm LHX610RE M6 x 1.00mm 10mm 10mm 12mm 8mm LHX612RE M6 x 1.00mm 12mm 12mm 12mm 8mm LHX615RE M6 x 1.00mm 15mm 15mm 12mm 8mm LHX620RE M6 x 1.00mm 20mm 20mm 12mm 8mm LHX625RE M6 x 1.00mm 25mm 25mm 12mm 8mm LHX630RE M6 x 1.00mm 30mm 30mm 12mm 8mm LHX635RE M6 x 1.00mm 35mm 25mm 12mm 8mm LHX640RE M6 x 1.00mm 40mm 25mm 12mm 8mm LHX645RE M6 x 1.00mm 45mm 25mm 12mm 8mm LHX650RE M6 x 1.00mm 50mm 25mm 12mm 8mm LHX655RE M6 x 1.00mm 55mm 25mm 12mm 8mm LHX660RE M6 x 1.00mm 60mm 25mm 12mm 8mm LHX665RE M6 x 1.00mm 65mm 25mm 12mm 8mm LHX670RE M6 x 1.00mm 70mm 25mm 12mm 8mm LHX675RE M6 x 1.00mm 75mm 25mm 12mm 8mm LHX680RE M6 x 1.00mm 80mm 25mm 12mm 8mm LHX685RE M6 x 1.00mm 85mm 25mm 12mm 8mm LHX690RE M6 x 1.00mm 90mm 25mm 12mm 8mm LHX820RE M8 x 1.25mm 20mm 20mm 15mm 10mm LHX825RE M8 x 1.25mm 25mm 25mm 15mm 10mm LHX830RE M8 x 1.25mm 30mm 30mm 15mm 10mm LHX835RE M8 x 1.25mm 35mm 25mm 15mm 10mm LHX840RE M8 x 1.25mm 40mm 25mm 15mm 10mm LHX845RE M8 x 1.25mm 45mm 25mm 15mm 10mm LHX1025FRE M10 x 1.25mm 25mm 25mm 17mm 12mm LHX1030FRE M10 x 1.25mm 30mm 30mm 17mm 12mm LHX1035FRE M10 x 1.25mm 35mm 30mm 17mm 12mm LHX1040FRE M10 x 1.25mm 40mm 25mm 17mm 12mm LHX1045FRE M10 x 1.25mm 45mm 25mm 17mm 12mm LHX1050FRE M10 x 1.25mm 50mm 25mm 17mm 12mm LHX1055FRE M10 x 1.25mm 45mm 25mm 17mm 12mm LHX1060FRE M10 x 1.25mm 60mm 25mm 17mm 12mm
Part Number
Thread/ Pitch Length Thread
Length Flange Diameter
Socket Size
LBWHX512R M5 x 0.8mm 12mm 12mm 16mm 7mm LBWHX516R M5 x 0.8mm 16mm 16mm 16mm 7mm LBWHX525R M5 x 0.8mm 25mm 25mm 16mm 7mm LBWHX612R M6 x 1.00mm 12mm 12mm 16mm 8mm LBWHX616R M6 x 1.00mm 16mm 16mm 16mm 8mm LBWHX620R M6 x 1.00mm 20mm 20mm 16mm 8mm LBWHX625R M6 x 1.00mm 25mm 25mm 16mm 8mm LBWHX630R M6 x 1.00mm 30mm 30mm 16mm 8mm LBWHX825R M8 x 1.25mm 25mm 25mm 16mm 10mm
New Bodywork Bolt Range in 7075 Aluminium machined with Rolled Threads for superior strength. These bolts are perfect for plastics/bodywork where the large diameter will prevent bolts 'pulling through' bodywork. The external hex drive on the head off ers enhanced strength. The heads are pre-drilled on the fl ats for ease of lockwiring. Our Aluminium Race Spec Bolts represent an outstanding 62% weight saving over equivalent sized steel bolts.
Race-Spec Hex Head Bolts
Race-Spec Body Bolts
sales 0044 (0) 1684 851940 www.pro-bolt .com16
Push-in button inserts are ideal for covering stress areas and non stress bolts, keeping out the dirt or for an effective colour contrast. Push-in buttons fit into the head of a standard allen key socket cap bolt and are held in place with a rubber 'O' ring. When ordering, please note sizes are taken from the thread diameter of the corresponding bolt – NOT the allen key drive.
Available individually in the following sizes:
Part Number Description Outside
DiameterTo Suit Allen Key Size
LBUT5 5mm Button Insert 7.8mm 4
LBUT6 6mm button insert 9.3mm 5
LBUT8 8mm Button Insert 12.5mm 6
LBUT10 10mm Button Insert 14.9mm 8
Button Inserts
FINISHING TOUCHES
Don’t let your lines rub you up the wrong way! Separate them with these neat little additions. Supplied with a colour co-ordinated Countersunk Bolt and Nyloc Nut to clamp a 7mm hose.
Cup Washers
The cup washer slides up the thread of the bolt and shrouds the head, leaving the head surface exposed. Good way to colour contrast – try these with a different coloured Aluminium bolt for a truly unique look. Available in the following sizes:
Hose Separators
Part Number Description
HOSESEP10 Brake line hose separator kit
Part Number Description Outside
Diameter
LWACP5 5mm Cup Washer 10.6mm
LWACP6 6mm Cup Washer 12.00mm
LWACP8 8mm Cup Washer 15.9mm
LWACP10 10mm Cup Washer 18.7mm
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14017
Part Number Description
LBNCOVER Individual
BNCOVER7-2 Pair of Covers with 'O' Rings
BNCOVER7-3 Set of 3 Covers with 'O' Rings
Bleed Nipple Covers
Keeps dust and grime away from your nipples! Slides straight onto the bleed nipple and held securely in place with the 'O' ring supplied. Fits the most popular 7mm bleed nipples.
Part Number Description
PCLIP10 Rubber lined P-Clips
P Clips
Part Number Description
LDCAP10 Individually
2DCAP10 Pair of Dust Caps
4DCAP10 Set of 4 Dust Caps
Tyre Valve Covers
Form an airtight seal and keep out the dirt with our Tyre Valve Covers - universal fi t for bikes, cars and cycles.
Flared Washers
‘Chunky’ Cup Washer, designed to accept either a standard M6 Socket Cap Bolt or a Countersunk Bolt. The outside diameter measures 25mm and has a height of 7mm. Excellent for spreading the load on deeper recessed panels.
ALL AVAILABLE IN A CHOICE OF 8 COLOURS: BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
Aluminium
AL
UM
INIU
M
Anodised Aluminium rubber lined P-Clips for securing rear brake lines.
sales 0044 (0) 1684 851940 www.pro-bolt .com18
BOLTS
Part Number
Thread Diameter/Pitch
Allen Key Drive
Max Head Diameter
Lengths Available
LSSSC5** M5 x 0.8mm 4mm 7.9mm 10mm, 12mm, 15mm, 20mm,
25mm, 30mm
LSSSC6** M6 x 1.00mm 5mm 9.9mm 10mm, 12mm, 15mm, 20mm,
25mm, 30mm, 35mm, 40mm,
45mm, 50mm, 55mm, 60mm,
65mm, 70mm, 75mm, 80mm,
85mm, 90mm, 95mm
LSSSC8** M8 x 1.25mm 6mm 12.4mm 15mm, 20mm, 25mm, 30mm,
35mm, 40mm, 45mm, 50mm,
55mm, 60mm, 65mm, 70mm,
75mm,
LSSSC10** M10 x 1.50mm 8mm 15.8mm 20mm, 25mm
LSSSC10**F M10 x 1.25mm 8mm 15.8mm 20mm, 25mm, 30mm, 35mm,
40mm, 45mm, 50mm, 55mm,
60mm, 65mm, 70mm, 75mm,
80mm, 85mm
Tapered Socket Cap Length measurements are taken from below the head
Part Number
Thread Diameter/Pitch
Socket Size
Max Head Diameter
Lengths Available
LSSHX5** M5 x 0.8mm 7mm 9.9mm 10mm, 12mm, 15mm, 20mm, 25mm,
30mm, 35mm
LSSHX6** M6 x 1.00mm 8mm 11.9mm 10mm, 12mm, 15mm, 20mm, 25mm,
30mm, 35mm, 40mm, 45mm, 50mm,
55mm, 60mm, 65mm, 70mm, 75mm,
80mm, 85mm, 90mm
LSSHX8** M8 x 1.25mm 12mm 15.8mm 15mm, 20mm, 25mm, 30mm, 35mm,
40mm, 45mm, 50mm, 55mm, 60mm,
65mm, 70mm, 75mm
LSSHX10** F M10 x 1.25mm 13mm 17.8mm 20mm, 25mm, 30mm, 35mm, 40mm,
45mm, 50mm, 52mm, 55mm, 57mm,
60mm, 65mm, 70mm, 75mm, 80mm
Flanged Hex Head Length measurements are taken from below the head
Part Number
Thread Diameter/Pitch
Allen Key Drive
Max Head Diameter
Lengths Available
LSSCS5** M5 x 0.8mm 3mm 10.0mm 15mm, 20mm, 25mm
LSSCS6** M6 x 1.00mm 4mm 12.0mm 15mm, 25mm, 30mm, 35mm,
40mm, 60mm
LSSCS8** M8 x 1.25mm 5mm 15.7mm 30mm, 40mm
Countersunk Bolts Length measurements are taken including the head
** Denotes length to be selected.
STAINLESS STEEL
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14019
Part Number
Thread Diameter/Pitch
Socket size
Max Head Diameter
Lengths Available
LSSHX6**R M6 x 1.00mm 8mm 11.0mm 10mm, 15mm, 20mm,
25mm
LSSHX8**R M8 x 1.25mm 10mm 15.0mm 25mm, 30mm, 35mm,
40mm, 45mm
LSSHX10**R M10 x 1.50mm 12mm 17.0mm 25mm
LSSHX10**FR M10 x 1.25mm 12mm 17.0mm 30mm, 60mm, 65mm,
70mm, 75mm
Race Spec Bolts Length measurements are taken from below the head
Part Number
Thread Diameter/Pitch
Allen key size
Max Head Diameter
Lengths Available
LSSPB5** M5 x 0.8mm 4mm 8.0mm 8mm, 10mm, 12mm,
16mm, 20mm, 25mm,
30mm
LSSPB6** M6 x 1.00mm 5mm 10.0mm 10mm, 12mm, 16mm,
20mm
LSSPB8** M8 x 1.25mm 6mm 12.5mm 40mm, 45mm
LSSPB10** M10 x 1.25mm 8mm 25mm 60mm
Parallel Head Bolts Length measurements are taken from below the head
Part Number
Thread Diameter/Pitch
Socket size
Max Head Diameter
Lengths Available
LSSSK6** M6 x 1.00mm 6mm 10.0mm 10mm, 12mm, 15mm,
20mm, 25mm, 27mm,
30mm, 35mm, 40mm,
45mm, 50mm, 55mm,
60mm, 65mm, 70mm,
75mm, 80mm, 85mm,
90mm
Spike Head Bolts Length measurements are taken from below the head
STA
INL
ES
S S
TE
EL
ALL AVAILABLE IN POLISHED STAINLESS
Stainless Steel
See page 76 for our UNC Imperial range.
sales 0044 (0) 1684 851940 www.pro-bolt .com20
Part Number Size Outside Diameter Thickness
LSSWAC5-15 M5 15mm 4mm
LSSWAC6-19 M6 19mm 4.5mm
LSSWAC6-22 M6 22mm 4.5mm
LSSWAC8-25 M8 25mm 5.5mm
Countersunk Washers
Part Number
Thread Diameter/Pitch
Allen Key Drive
Max Head Diameter
Lengths Available
LSSFB412F M4 (0.50) 3mm 8mm 12mm
LSSFB5** M5 (0.8) 4mm 12mm 12mm, 16mm, 20mm, 25mm
LSSFB516XL M5 (0.8) 4mm 16mm 16mm
LSSFB6** M6 (1.00) 5mm 16mm 16mm, 20mm, 25mm, 30mm,
35mm, 40mm
LSSFB6**XS M6 (1.00) 5mm 12mm 16mm, 20mm, 30mm
LSSFB8** M8 (1.25) 5mm 16mm 20mm, 25mm, 30mm, 35mm,
40mm
LSSFB10**F M10 (1.25) 6mm 18mm 25mm, 30mm, 35mm
Dome Head/Fairing Bolts Length measurements are taken from below the head
STAINLESS STEEL
Part Number Thread/Pitch Socket Size
LSSFLN5 M5 x 0.8mm 8mm
LSSFLN6 M6 x 1.00mm 10mm
LSSFLN8 M8 x 1.25mm 12mm
LSSFLN10 M10 x 1.50mm 14mm
LSSFLN10F M10 x 1.25mm 14mm
LSSFLN10FF M10 x 1.00mm 14mm
LSSFLN12FF M12 x 1.25mm 15mm
Flanged Nuts
Part Number Inside Diameter
Outside Diameter
Thickness
LSSWA6 6mm 12mm o/d 1.6mm
LSSWA6-15 6mm 15mm o/d 1.6mm
LSSWA8 8mm 16mm o/d 1.6mm
LSSWA10 10mm 20mm o/d 1.6mm
Flat Washers
Part Number Thread/Pitch Socket Size
LSSDOMENUT6 M6 x 1.00mm 10mm
LSSDOMENUT8 M8 x 1.25mm 13mm
Dome Nuts
NUTS & WASHERS
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14021
ALL AVAILABLE IN POLISHED STAINLESS
Stainless Steel
STA
INL
ES
S S
TE
EL
sales 0044 (0) 1684 851940 www.pro-bolt .com22
A New Generation of Bolt!Our Race-Spec bolts are designed for professionals, enthusiasts and those who like attention to detail. By reducing the socket size/head diameter and machining out the head, we have achieved a significant weight saving. On average these bolts weigh 45% less than steel equivalents without any compromise in strength or durability.
These products have been developed at the cutting edge of competition and the qualities are recognized and widely used by top Race Teams internationally.
It is possible to save an amazing two kilos on an average motorcycle. This range of bolts are supplied 'off the machine with no polishing' to give the factory look.
Length measurements are taken from below the head.
RACE SPEC HEX HEAD
RACE-SPEC
Part Number
Diameter & Thread
Length Thread Length
Head Diameter
Socket Size
TIHX510R M5 x 0.8mm 10mm 10mm 10mm 7mm
TIHX512R M5 x 0.8mm 12mm 12mm 10mm 7mm
TIHX516R M5 x 0.8mm 16mm 16mm 10mm 7mm
TIHX520R M5 x 0.8mm 20mm 20mm 10mm 7mm
TIHX525R M5 x 0.8mm 25mm 25mm 10mm 7mm
TIHX610R M6 x 1.00mm 10mm 10mm 11mm 8mm
TIHX612R M6 x 1.00mm 12mm 12mm 11mm 8mm
TIHX614R M6 x 1.00mm 14mm 14mm 11mm 8mm
TIHX616R M6 x 1.00mm 16mm 16mm 11mm 8mm
TIHX618R M6 x 1.00mm 18mm 18mm 11mm 8mm
TIHX620R M6 x 1.00mm 20mm 20mm 11mm 8mm
TIHX622R M6 x 1.00mm 22mm 22mm 11mm 8mm
TIHX625R M6 x 1.00mm 25mm 25mm 11mm 8mm
TIHX628R M6 x 1.00mm 28mm 28mm 11mm 8mm
TIHX630R M6 x 1.00mm 30mm 30mm 11mm 8mm
TIHX632R M6 x 1.00mm 32mm 32mm 11mm 8mm
TIHX635R M6 x 1.00mm 35mm 25mm 11mm 8mm
TIHX640R M6 x 1.00mm 40mm 25mm 11mm 8mm
TIHX645R M6 x 1.00mm 45mm 25mm 11mm 8mm
TIHX650R M6 x 1.00mm 50mm 25mm 11mm 8mm
TIHX655R M6 x 1.00mm 55mm 25mm 11mm 8mm
TIHX660R M6 x 1.00mm 60mm 25mm 11mm 8mm
TIHX665R M6 x 1.00mm 65mm 25mm 11mm 8mm
TIHX670R M6 x 1.00mm 70mm 25mm 11mm 8mm
TIHX675R M6 x 1.00mm 75mm 25mm 11mm 8mm
TIHX680R M6 x 1.00mm 80mm 25mm 11mm 8mm
TIHX685R M6 x 1.00mm 85mm 25mm 11mm 8mm
TIHX690R M6 x 1.00mm 90mm 25mm 11mm 8mm
TIHX720R M7 x 1.00mm 20mm 20mm 11mm 8mm
TIHX740R M7 x 1.00mm 40mm 20mm 11mm 8mm
TIHX750R M7 x 1.00mm 50mm 20mm 11mm 8mm
TIHX760R M7 x 1.00mm 60mm 20mm 11mm 8mm
TIHX780R M7 x 1.00mm 80mm 20mm 11mm 8mm
TIHX815R M8 x 1.25mm 15mm 15mm 15mm 10mm
TIHX820R M8 x 1.25mm 20mm 20mm 15mm 10mm
TIHX825R M8 x 1.25mm 25mm 25mm 15mm 10mm
TIHX828R M8 x 1.25mm 28mm 28mm 15mm 10mm
TIHX830R M8 x 1.25mm 30mm 30mm 15mm 10mm
TITA
NIU
M
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14023
ALL AVAILABLE IN MACHINE FACTORY FINISH
Titanium
TIHX832R M8 x 1.25mm 32mm 30mm 15mm 10mm
TIHX835R M8 x 1.25mm 35mm 25mm 15mm 10mm
TIHX840R M8 x 1.25mm 40mm 25mm 15mm 10mm
TIHX845R M8 x 1.25mm 45mm 25mm 15mm 10mm
TIHX850R M8 x 1.25mm 50mm 25mm 15mm 10mm
TIHX855R M8 x 1.25mm 55mm 25mm 15mm 10mm
TIHX860R M8 x 1.25mm 60mm 25mm 15mm 10mm
TIHX865R M8 x 1.25mm 65mm 25mm 15mm 10mm
TIHX870R M8 x 1.25mm 70mm 25mm 15mm 10mm
TIHX880R M8 x 1.25mm 80mm 25mm 15mm 10mm
TIHX885R M8 x 1.25mm 85mm 25mm 15mm 10mm
TIHX1020FR M10 x 1.25mm 20mm 20mm 17mm 12mm
TIHX1025FR M10 x 1.25mm 25mm 25mm 17mm 12mm
TIHX1030FR M10 x 1.25mm 30mm 30mm 17mm 12mm
TIHX1035FR M10 x 1.25mm 35mm 25mm 17mm 12mm
TIHX1040FR M10 x 1.25mm 40mm 25mm 17mm 12mm
TIHX1045FR M10 x 1.25mm 45mm 25mm 17mm 12mm
TIHX1050FR M10 x 1.25mm 50mm 25mm 17mm 12mm
TIHX1055FR M10 x 1.25mm 55mm 25mm 17mm 12mm
TIHX1057FR M10 x 1.25mm 57mm 25mm 17mm 12mm
TIHX1060FR M10 x 1.25mm 60mm 25mm 17mm 12mm
TIHX1065FR M10 x 1.25mm 65mm 25mm 17mm 12mm
TIHX1070FR M10 x 1.25mm 70mm 25mm 17mm 12mm
TIHX1075FR M10 x 1.25mm 75mm 25mm 17mm 12mm
TIHX1080FR M10 x 1.25mm 80mm 25mm 17mm 12mm
TIHX1090FR M10 x 1.25mm 90mm 25mm 17mm 12mm
Part Number
Diameter & Thread
Length Thread Length
Head Diameter
Socket Size
Selected lengths now available in Stainless Steel (See page 19).
TITANIUM PARTS
sales 0044 (0) 1684 851940 www.pro-bolt .com24
Part Number
Thread & Pitch
Allen Key Drive
Max Head Diameter
Lengths Available
TISC4** M4 x 0.70mm 3mm 6.9mm 10mm, 12mm, 15mm, 20mm, 25mm, 35mm
TISC5** M5 x 0.80mm 4mm 7.9mm 10mm, 12mm, 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 70mm
TISC6** M6 x 1.00mm 5mm 9.9mm 10mm, 12mm, 15mm, 20mm, 22mm, 25mm, 28mm 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm, 65mm, 70mm, 75mm, 80mm, 85mm, 90mm, 95mm, 100mm
TISC720 M7 x 1.00mm 5mm 9.9mm 20mm
TISC8** M8 x 1.25mm 6mm 12.5mm 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm, 65mm, 70mm, 75mm, 80mm, 85mm
TISC10** M10 x 1.50mm 8mm 15.8mm 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 70mm, 75mm, 80mm
TISC10**F M10 x 1.25mm 8mm 15.8mm 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm, 65mm, 70mm, 75mm, 80mm, 85mm
Tapered Socket Cap Length measurements are taken from below the head
BOLTS
Part Number
Thread & Pitch
Socket Size
Flange Diameter
Lengths Available
TIHX4** M4 x 0.70mm 6mm 8mm 10mm, 15mm, 20mm, 25mm
TIHX5** M5 x 0.80mm 7mm 10mm 10mm, 12mm, 15mm, 20mm, 25mm, 30mm, 40mm, 45mm
TIHX6** M6 x 1.00mm 8mm 12mm 10mm, 12mm, 14mm, 15mm, 16mm, 18mm, 20mm, 22mm, 25mm, 28mm, 30mm, 32mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm, 65mm, 70mm, 75mm, 80mm, 85mm, 90mm, 95mm, 100mm, 105mm, 115mm
TIHX8** M8 x 1.25mm 12mm 16mm 15mm, 20mm, 25mm, 28mm, 30mm, 32mm, 35mm, 40mm, 45mm, 47mm, 50mm, 55mm, 60mm, 65mm, 70mm, 80mm, 85mm
TIHX10** M10 x 1.50mm 12/13mm 18mm 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55m, 60mm, 65mm , 70mm, 75mm
TIHX10**F M10 x 1.25mm 12/13mm 18mm 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 57mm, 60mm, 65mm, 70mm, 75mm, 80mm, 85mm, 90mm, 95mm, 100mm, 105mm, 110mm, 112mm, 115mm, 125mm
TIHX12**FF M12 x 1.25mm 14mm 20mm 50mm, 60mm, 70mm, 80mm, 90mm
Flanged Hex Head Length measurements are taken from below the head
** Denotes length to be selected
TITA
NIU
M
ALL AVAILABLE IN A CHOICE OF 4 COLOURS: BLUE • GOLD • NATURAL • PURPLE HAZE
Titanium
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14025
Part Number
Thread & Pitch
Allen Key Drive
Max Head Diameter
Lengths Available
TICS3** M3 X 0.60mm 2mm 5.8mm 10mm, 15mm,
TICS4** M4 X 0.70mm 2.5mm 7.8mm 15mm, 20mm, 45mm, 50mm
TICS5** M5 x 0.80mm 3mm 9.8mm 8mm, 10mm, 15mm, 20mm,
25mm, 30mm,
TICS6** M6 x 1.00mm 4mm 11.8.mm 15mm, 20mm, 25mm, 30mm,
35mm, 40mm, 45mm
TICS8** M8 x 1.25mm 5mm 15.6mm 20mm, 25mm, 30mm, 35mm,
40mm, 45mm, 50mm, 55mm
TICS10** M10 x 1.50mm 6mm 19.9mm 25mm, 30mm
TICS10**F M10 x 1.25mm 6mm 19.9mm 20mm, 30mm
Countersunk Bolts Length measurements include the head
Part Number
Thread & Pitch
Allen Key Drive
Max Head Diameter
Lengths Available
TIFB412F M4 x 0.50mm 3mm 8mm 12mm
TIFB4** M4 x 0.70mm 3mm 8mm 10mm, 12mm, 15mm
TIFB5** M5 x 0.80mm 4mm 12mm 10mm, 16mm, 20mm, 25mm,
30mm
TIFB516XL M5 x 0.80mm 4mm 16mm 16mm
TIFB6* M6 x 1.00mm 5mm 16mm 10mm, 16mm, 20mm, 25mm,
30mm, 35mm, 40mm, 55mm
TIFB6**XS M6 x 1.00mm 5mm 12mm 20mm, 30mm
TIFB8** M8 x 1.25mm 5mm 16mm 20mm, 25mm, 30mm, 35mm
40mm, 85mm
Dome Head/Fairing Bolts Length measurements are taken from below the head
TITANIUM PARTS
sales 0044 (0) 1684 851940 www.pro-bolt .com26
Part Number Thread & Pitch Socket Size
TIFN4 M4 (0.70 pitch) Full Nut 7mm
TIFN5 M5 (0.80 pitch) Full Nut 8mm
TIFN6 M6 (1.00 pitch) Full Nut 10mm
TIFN8 M8 (1.25 pitch) Full Nut 13mm
TIFN10 M10 (1.50 pitch) Full Nut 17mm
TIFN10F M10 (1.25 pitch) Full Nut 17mm
TIFN12 M12 (1.75 pitch) Full Nut 18mm
TIFN12F M12 (1.50 pitch) Full Nut 18mm
Full Nuts
NUTS
Part Number Thread & Pitch Socket Size
TIFLN5 M5 (0.80 pitch) Flanged Nut 8mm
TIFLN6 M6 (1.00 pitch) Flanged Nut 10mm
TIFLN8 M8 (1.25 pitch) Flanged Nut 13mm
TIFLN10 M10 (1.50 pitch) Flanged Nut 15mm
TIFLN10F M10 (1.25 pitch) Flanged Nut 14mm
TIFLN10FF M10 (1.00 pitch) Flanged Nut 14mm
TIFLN12 M12 (1.75 pitch) Flanged Nut 18mm
TIFLN12F M12 (1.50 pitch) Flanged Nut 17mm
TIFLN12FF M12 (1.25 pitch) Flanged Nut 17mm
Flanged Nuts
Part Number Thread & Pitch Socket Size
TINYN4 M4 (0.70 pitch) Nyloc Nut 7mm
TINYN5 M5 (0.80 pitch) Nyloc Nut 8mm
TINYN6 M6 (1.00 pitch) Nyloc Nut 10mm
TINYN8 M8 (1.25 pitch) Nyloc Nut 13mm
TINYN10 M10 (1.50 pitch) Nyloc Nut 16mm
TINYN10F M10 (1.25 pitch) Nyloc Nut 16mm
TINYN12 M12 (1.75 pitch) Nyloc Nut 20mm
TINYN12F M12 (1.50 pitch) Nyloc Nut 20mm
TINYN12FF M12 (1.25 pitch) Nyloc Nut 20mm
Nyloc Nuts
Note: Also refer to our axle nuts on page 54/55 where larger sizes are available.
26
Part Number Thread & Pitch Socket Size
TINYNFL5 M5 (0.80 pitch) Flanged Nyloc Nut 8mm
TINYNFL6 M6 (1.00 pitch) Flanged Nyloc Nut 10mm
TINYNFL8 M8 (1.25 pitch) Flanged Nyloc Nut 13mm
TINYNFL8F M8 (1.00 pitch) Flanged Nyloc Nut 13mm
TINYNFL10 M10 (1.50 pitch) Flanged Nyloc Nut 15mm
TINYNFL10F M10 (1.25 pitch) Flanged Nyloc Nut 15mm
TINYNFL12 M12 (1.75 pitch) Flanged Nyloc Nut 18mm
TINYNFL12F M12 (1.50 pitch) Flanged Nyloc Nut 18mm
TINYNFL12FF M12 (1.25 pitch) Flanged Nyloc Nut 18mm
Flanged Nyloc Nuts
TITA
NIU
M
ALL AVAILABLE IN A CHOICE OF 4 COLOURS: BLUE • GOLD • NATURAL • PURPLE HAZE
Titanium
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14027
Bi-Hex Plastic Nyloc NutsPart Number Thread & Pitch Socket Size
TINYNFLBH6 M6 (1.00 pitch) Flanged Bi-Hex Plastic Nyloc 11mm
TINYNFLBH8 M8 (1.25 pitch) Flanged Bi-Hex Plastic Nyloc 13mm
TINYNFLBH10 M10 (1.50 pitch) Flanged Bi-Hex Plastic Nyloc 15mm
TINYNFLBH10F M10 (1.25 pitch) Flanged Bi-Hex Plastic Nyloc 15mm
TINYNFLBH10FF M10 (1.00 pitch) Flanged Bi-Hex Plastic Nyloc 15mm
Part Number Thread & Pitch Socket Size
TILOCKNUTBH6 M6 (1.00) Flanged Bi-Hex Metal Locknut 11mm
TILOCKNUTBH8 M8 (1.25) Flanged Bi-Hex Metal Locknut 13mm
TILOCKNUTBH10 M10 (1.50) Flanged Bi-Hex Metal Locknut 15mm
TILOCKNUTBH10F M10 (1.25) Flanged Bi-Hex Metal Locknut 15mm
Bi-Hex Metal Lock Nuts
Metal Lock NutsPart Number Thread & Pitch Socket Size
TILOCKNUT6 M6 (1.00 pitch) Flanged Metal Locknut 10mm
TILOCKNUT8 M8 (1.25 pitch) Flanged Metal Locknut 12mm
TILOCKNUT10 M10 (1.50 pitch) Flanged Metal Locknut 14mm
TILOCKNUT10F M10 (1.25 pitch) Flanged Metal Locknut 14mm
TITANIUM PARTS
sales 0044 (0) 1684 851940 www.pro-bolt .com28
WASHERS
Flat WashersPart Number Description Outside
Diameter Thickness
TIWA3 M3 Flat Washer 7mm 0.6mm
TIWA4 M4 Flat Washer 9mm 0.7mm
TIWA5 M5 Flat Washer 10mm 1.0mm
TIWA6 M6 Flat Washer 12mm 1.5mm
TIWA8 M8 Flat Washer 16mm 1.6mm
TIWA10 M10 Flat Washer 20mm 1.7mm
TIWA12 M12 Flat Washer 24mm 2.6mm
TIWA14 M14 Flat Washer 28mm 2.5mm
TIWA18 M18 Flat Washer 29mm 3.2mm
TIWA20 M20 Flat Washer 30mm 3.0mm
Part Number Description Outside Diameter
Thickness
TIWAC6-22 M6 Countersunk Washer 22mm 4.5mm
Countersunk Washers
Penny Washers
Part Number Description Outside Diameter
Thickness
TIWA5-15 M5 Penny Washer 15mm 1.0mm
TIWA5-20 M5 Penny Washer 20mm 1.1mm
TIWA6-15 M6 Penny Washer 15mm 1.5mm
TIWA6-20 M6 Penny Washer 20mm 1.5mm
TIWA6-25 M6 Penny Washer 25mm 1.8mm
TIWA6-30 M6 Penny Washer 30mm 1.6mm
Spring Washers
Part Number Description Outside Diameter
Thickness
TIWAS10 M10 Spring Washer 16mm 2.6mm
TIWAS12 M12 Spring Washer 25mm 2.9mm
TIWAS14 M14 Spring Washer 28mm 3.6mm
TIWAS16 M16 spring washer 24mm 4.0mm
Drilled Washers
Part Number Description Outside Diameter
Thickness
TIWAD5 M5 Drilled Washer 10mm 1.0mm
TIWAD6 M6 Drilled Washer 12mm 1.5mm
TIWAD8 M8 Drilled Washer 16mm 1.6mm
TIWAD10 M10 Drilled Washer 20mm 1.7mm
TIWAD12 M12 Drilled Washer 24mm 2.5mm
TIWAD28 M28 Drilled Washer 48mm 2.9mm
28
TITA
NIU
M
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14029
Rods
Part Number Diameter & Length
TIROD3.2-240 Rod - M3.2 Diameter - approx 240mm Length
TIROD4-240 Rod - M4 Diameter - approx 240mm Length
TIROD5-240 Rod - M5 Diameter - approx 240mm Length
TIROD6-240 Rod - M6 Diameter - approx 240mm Length
TIROD8-240 Rod - M8 Diameter - approx 240mm Length
TIROD10-240 Rod - M10 Diameter - approx 240mm Length
TIROD12.7-240 Rod - M12.7 Diameter - approx 240mm Length
TIROD16-240 Rod - M16 Diameter - approx 240mm Length
TIROD18-240 Rod - M18 Diameter - approx 240mm Length
TIROD20-240 Rod - M20 Diameter - approx 240mm Length
TIROD5-1000 Rod - M5 Diameter - 1 Metre Length
TIROD6-1000 Rod - M6 Diameter - 1 Metre Length
TIROD8-1000 Rod - M8 Diameter - 1 Metre Length
TIROD10-1000 Rod - M10 Diameter - 1 Metre Length
TIROD12-1000 Rod - M12 Diameter - 1 Metre Length
TIROD16-1000 Rod - M16 Diameter - 1 Metre Length
TIROD18-1000 Rod - M18 Diameter - 1 Metre Length
TIROD20-1000 Rod - M20 Diameter - 1 Metre Length
We off er Titanium Rod in 240mm or 1m lengths.
Note: We would advise that care be taken when machining Titanium as it is fl ammable and ideally requires cooling. Wear on tooling is also extensive.
RODS
Note: Sizes are approx as these are ‘ends’.
ALL AVAILABLE IN MACHINE FACTORY FINISH
Titanium
sales 0044 (0) 1684 851940 www.pro-bolt .com30
Makes removal of bodywork easy and fast. Supplied individually or in packs and in all materials. Available materials, packs and lengths are listed below – choose from D-Ring, Scalloped Head or Allen Key Drive, all with a superb finish (17mm is the most popular, 14mm is the most common for thinner race fairings).
D-RingPart Number Description
LQRCLIP14 14mm Individual D-Ring Quick Release Fastener
LQRCLIP17 17mm Individual D-Ring Quick Release Fastener
LQRCLIP19 19mm Individual D-Ring Quick Release Fastener
QRCLIP1014 Packs of 10 - D-Ring 14mm Quick Release Fasteners
& Washers
QRCLIP1017 Packs of 10 - D-Ring 17mm Quick Release Fasteners
& Washers
QRCLIP1019 Packs of 10 - D-Ring 19mm Quick Release Fasteners
& Washers
Can also be purchased in packs complete with backing clips
QRPACKRIVET** Pack of 10 D-Ring Fasteners with Rivet-on Backing Plates
and Rivets & Washers
QRPACKSLIDE** Pack of 10 D-Ring Fasteners with Slide-on Backing Plates
& Washers
Alley Key Drive
Part Number Description
LQRCLIPAK14 14mm Individual Allen Key Quick Release Fastener
LQRCLIPAK17 17mm Individual Allen Key Quick Release Fastener
LQRCLIPAK19 19mm Individual Allen Key Quick Release Fastener
LQRCLIPAK21 21mm Individual Allen Key Quick Release Fastener
LQRCLIPAK24 24mm Individual Allen Key Quick Release Fastener
QRCLIPAK1014 Packs of 10 - Allen Key 14mm Quick Release Fasteners
with Washers
QRCLIPAK1017 Packs of 10 - Allen Key 17mm Quick Release Fasteners
with Washers
QRCLIPAK1019 Packs of 10 - Allen Key 19mm Quick Release Fasteners
with Washers
QRCLIPAK1021 Packs of 10 - Allen Key 21mm Quick Release Fasteners
with Washers
QRCLIPAK1024 Packs of 10 - Allen Key 24mm Quick Release Fasteners
with Washers
Can also be purchased in packs complete with backing clips
QRPACKAKRIVET** Pack of 10 D-Ring Fasteners with Rivet-on Backing Plates,
Rivets and Washers
QRPACKAKSLIDE** Pack of 10 D-Ring Fasteners with Slide-on Backing Plates
and Washers
QUICK RELEASE 1/4 TURN FASTENERS
Note: We also offer the slide-on & rivet-on backing clips individually, Please see page 74/75
QUICK RELEASE FASTENERS
ALL AVAILABLE IN A CHOICE OF 8 COLOURS: BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
Aluminium
** Required length
** Required length
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14031
D-Ring
Part Number Description
LSSQRCLIP14 14mm Length D-ring Quick Release Fastener
LSSQRCLIP17 17mm Length D-ring Quick Release Fastener
LSSQRCLIP19 19mm Length D-ring Quick Release Fastener
SSQRCLIP1017 17mm D-ring Quick Release Fastener - Pack of 10
SSQRCLIP1417 17mm D-ring Quick Release Fastener - Pack of 14
SSQRPACKRIVET1017 17mm D-ring Quick Release Fastener - Pack of 10 with Rivet on Backs & Washers
SSQRPACKRIVET1417 17mm D-ring Quick Release Fastener - Pack of 14 with Rivet on Backs & Washers
SSQRPACKSLIDE1017 17mm D-ring Quick Release Fastener - Pack of 10 with Slide on Backs & Washers
SSQRPACKSLIDE1417 17mm D-ring Quick Release Fastener - Pack of 14 with Slide on Backs & Washers
Alley Key DrivePart Number Description
LSSQRCLIPAK14 14mm Allen Key Drive Quick Release Fastener
LSSQRCLIPAK17 17mm Allen Key Drive Quick Release Fastener
LSSQRCLIPAK19 19mm Allen Key Drive Quick Release Fastener
SSQRPACKAKRIVET1017 17mm Allen Key Quick Release Fastener - Pack of 10 with Rivet on Backs & Washers
SSQRPACKAKRIVET1417 17mm Allen Key Quick Release Fastener - Pack of 14 with Rivet on Backs & Washers
SSQRPACKAKSLIDE1017 17mm Allen Key Quick Release Fastener - Pack of 10 with Slide on Backs & Washers
SSQRPACKAKSLIDE1417 17mm Allen Key Quick Release Fastener - Pack of 14 with Slide on Backs & Washers
17mm is the perfect length and look for the MV Agusta F4 and the Ducati 748/916/996 range.
D-Ring
Part Number Description
LDZUS-PANEX10 Individual Black Zinc Coated Steel D-Ring Quick Release Fastener
QRSTEEL17SETBK Pack of 10 Black Steel 17mm Fasteners, Rivet on Backs and
Rivets & Washers
QRSTEELSETSLIDE Pack of 10 Black Steel 17mm Fasteners, Slide on Backs and
Rivets & Washers
Black Zinc Coated Steel Quick Release Fasteners. Strong and durable cost eff ective option, available in 17mm only – the most popular length.
D-Ring
Part Number Description
TIQRCLIP17 17mm Titanium Quick Release Stud - D Ring
TIQRCLIP19 19mm Titanium Quick Release Stud - D Ring
AVAILABLE IN BLACK ZINC COATED
Black Zinc Coated Steel
QU
ICK
RE
LE
AS
E F
AS
TE
NE
RS
ALL AVAILABLE IN A CHOICE OF 4 COLOURS: BLUE • GOLD • NATURAL • PURPLE HAZE
Titanium
ALL AVAILABLE IN POLISHED STAINLESS
Stainless Steel
Allen Key DrivePart Number Description
TIQRCLPAK17 17mm Titanium Quick Release Stud -
Allen Key Drive
sales 0044 (0) 1684 851940 www.pro-bolt .com32
We offer a variety of tubs and workshop kits in aluminium. Ideal for spares in the workshop or for that special project – just choose your preferred quantity, colour and bolt combination.
25pc Workshop Kit
Supplied with Copper Grease Lubricant, Allen Keys and Stickers
• WSKIT25 Assortment of 5mm, 6mm & 8mm Allen Bolts, Fairing Bolts, Nuts and Washers.
100pc Workshop Tubs
WORKSHOP ASSORTMENTS
WORKSHOP KITS
Supplied in a handy tub with Allen Keys and Copper Grease containing the following:
Allen Key Socket Cap Bolt Tub• PBTUBALLEN 100 pc Metric Socket Cap Allen Key Bolt Tub - M5 - M8
Dome Head/Fairing Bolt Tub• PBTUBFAIR 100 pc Metric Dome Head Allen Key Bolt Tub - M5 - M8
Mixed Bolt Tub• PBTUBMIXED 100 pc Metric Assorted Dome Head & Socket Cap Allen
Key Bolt Tub - M5 - M8
Nut & Washer Tub• PBTUBNUTS 100 pc Metric Assorted Full Nuts, Nyloc Nuts, & Washers
- M5 - M8
Dome Nut Tub• PBTUBDOMENUT 100 pc Metric Assorted Dome Nuts - M4 - M5 - M6 - M8
- M10 - M10 Fine
Drilled Washer Tub• PBTUBWAD 100 pc Drilled Washer Tub - M5 - M12
Threaded Collar Tub• PBTUBCOLLAR 100 pc Threaded Collar Tub - M5 & M6 various outside
diameters & lengths for use as spacers, shoulders and collars. Supplied only in natural finish. Please note: Colour options are not available.
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14033
200pc Workshop Box
Ideal for large scale projects. Excellent value for money, presented in a convenient cabinet and comprises of the following:
• BCAB500 Allen Bolts, Dome Head Bolts, Countersunk Bolts, Nuts and Washers in 5mm, 6mm and 8mm sizes in their most popular lengths. Also comes with Allen Keys, Copper Grease Lubricant, Anti-Scratch Washers and Pro-Bolt stickers.
500pc Workshop Cabinet
ALL AVAILABLE IN A CHOICE OF 8 COLOURS: BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
Aluminium
WO
RK
SH
OP
KIT
S
Complete with Allen Keys, Copper Grease Lubricant, Anti-Scratch Washers and Pro-Bolt Stickers. Contains the following:
• WSBOX200 (In our handy Workshop Box we supply) Allen Bolts, Dome Head Bolts, Nuts, Washers, Countersunk Bolts, Countersunk Washers and Cup Washers in the most popular sizes.
sales 0044 (0) 1684 851940 www.pro-bolt .com34
We offer a variety of tubs and workshop kits in Stainless Steel. Ideal for spares in the workshop or for special projects. Exact contents are available on-line and can be amended if desired, with the agreement of Pro-Bolt.
50pc Workshop Kit
Supplied with Copper Grease Lubricant, Allen Keys and Stickers containing the following:
• SSWSBOX50 Comprises: 10 Nuts • 10 Washers 10 Countersunk Bolts 10 Flanged Hex Head Bolts 10 Tapered Socket Caps Bolts
100pc Workshop Tubs
Supplied with Allen Keys, Copper Grease Lubricant, Anti-Scratch Washers and Pro-Bolt Stickers containing the following:
• SSWSBOX200 Comprises: 25 Assorted Washers - M5 - M10 25 Countersunk Bolts 30 Assorted Nuts - M5 - M10 60 Flanged Hex Head Bolts - M5 - M10 60 Tapered Socket Cap Bolts - M5 - M10
200pc Workshop Box
Supplied in a handy tub with Allen Keys and Copper Grease containing the following:
Allen Key Socket Cap Bolts• SSTUBALLEN 100 pc Metric Tapered Socket Cap Allen Key
Bolt Tub - M5 - M8
Dome Head/Fairing Bolts• SSTUBFAIR 100 pc Metric Dome Head Allen Key Bolt
Tub - M5 - M8
Mixed Bolt Tubs• SSTUBMIXED 100 pc Metric Assorted Dome Head & Tapered
Socket Cap Allen Key Bolt Tub - M5 - M8
ALL AVAILABLE IN POLISHED STAINLESS
Stainless Steel
WORKSHOP KITS
ALL AVAILABLE IN A CHOICE OF 4 COLOURS: BLUE • GOLD • NATURAL • PURPLE HAZE
Titanium
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14035
In our Titanium workshop boxes we provide a selection of our most popular parts. Exact contents are available on-line and can be amended if desired, with the agreement of Pro-Bolt.
50pc Workshop Box
Supplied with Copper Grease Lubricant, Allen Keys and Stickers containing the following:
• TIWSBOX100 Comprises:15 Assorted Washers10 Countersunk Bolts25 Assorted Nuts25 Flanged Hex Head Bolts25 Tapered Socket Cap Bolts
100pc Workshop Box
200pc Workshop Box
Supplied with Copper Grease and Stickers, containing the following:
• TIWSBOX100RS Race-Spec Flanged Hex Head BoltsM5 - M10
100pc Flanged Hex Head'Race-spec' Workshop Box
Supplied with Copper Grease Lubricant, Allen Keys and Stickers containing the following:
• TIWSBOX50 Comprises:10 Nuts 10 Washers 10 Countersunk Bolts 10 Flanged Hex Head Bolts 10 Tapered Socket Caps Bolts
Supplied with Allen Keys, Copper Grease Lubricant, Anti-Scratch Washers and Pro-Bolt Stickers containing the following:
• TIWSBOX200 Comprises:25 Assorted Washers - M5 - M1025 Countersunk Bolts30 Assorted Nuts - M5 - M1060 Flanged Hex Head Bolts - M5 - M1060 Tapered Socket Cap Bolts - M5 - M10
WO
RK
SH
OP
KIT
S
sales 0044 (0) 1684 851940 www.pro-bolt .com36
FULL MONTY BOLT KITS
All our non-stress area Bolt Kits are available in one easy pack which includes: Side Engine Casing Kit, Fairing Bolt Kit, Screen Bolt Kit, Fuel Cap Kit, Mudguard/Hugger Kit and Number Plate Kit. You can ensure a colour consistent finish throughout. We also include a complementary selection of 20 bolts - assorted Dome Head and Socket Cap Bolts, which can be used as spares or used in other non stress areas (for example Heel Guards, Mudguards and Chain Guards).
Choose from our coloured Aluminium or polished Stainless Steel Ranges.
ALL AVAILABLE IN POLISHED STAINLESS
Stainless Steel
ALL AVAILABLE IN A CHOICE OF 8 COLOURS: BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
Aluminium
MOTORCYCLE PARTS
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14037
Our aluminium Accessory Kits are available in one easy pack. Products vary slightly, so please ask for exact contents or view specifi c model on-line. Achieve a colour consistent look throughout your bike – excellent gift idea! Also included is a complementary selection of 20 bolts – assorted Dome Head and Socket Cap Bolts which can be used as spares or in non stress areas (for example, Heel Guards, Mudguards and Chain Guards).
FULL MONTY ACCESSORY KITS
ALL AVAILABLE IN A CHOICE OF 8 COLOURS: BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
Aluminium
MO
TO
RC
YC
LE
PA
RT
S
sales 0044 (0) 1684 851940 www.pro-bolt .com38
ENGINE CASING KITS
ALL AVAILABLE IN A CHOICE OF 8 COLOURS: BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
Aluminium
ALL AVAILABLE IN POLISHED STAINLESS
Stainless Steel
ALL AVAILABLE IN A CHOICE OF 4 COLOURS: BLUE • GOLD • NATURAL • PURPLE HAZE
Titanium
Our Engine Kits include all the necessary bolts to replace all side engine-casing bolts in your chosen colour. Also included are Copper Grease Lubricant and the necessary Allen Keys. Kits are easy to use – remove one bolt at a time, and replace with the identical length bolt from your Pro-Bolt kit.
All Engine Kits are supplied using Allen Key Bolts. Where fitment will allow, we also offer Flanged Hex Head kits.
Please note: Oil Filler Caps and Cam Cover Bolts are sold separately.
MOTORCYCLE PARTS
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14039
CAM COVER BOLTS
DescriptionStainless Steel Part Number
Single Top Cylinder Head Bolt SSSITEM1
Set of 8 Cylinder Head Bolt SSSITEM1-8
Single Side Cam Bolt SSSITEM3
Set of 4 Side Cam Bolts SSSITEM3-4
Complete set of 8 Top & 4 Side SSSITEM13FULL
An absolute must for any GSXR & Bandit. Replace dull and rusty Cam Cover bolts. Our bolts are supplied in a smooth polished fi nish. Available individually or as a full set of 12 (8 top & 4 side). The fi nishing touch to any engine!
Suzuki Bandit/GSXR
Stainless Steel
Description Aluminium Part Number
Individual LSPYAM10
Set of 8 SPYAM10-8
Yamaha Fazer XJR
Available individually or as a set of 8. Fits: Fazer 600, Fazer 1000, XJR1200 & XJR1300
SUMP BOLTS
Part Number Thread & Pitch
TISUMP1215MAG M12 x 1.50mm x 15mm
TISUMP1412MAG M14 x 1.50mm x 12mm
TISUMP1412FMAG M14 x 1.25mm x 12mm
Sump Bolts
Our Sump Bolts are pre-drilled on all flats for ease of lockwiring. They are also fitted with a magnetic stud to assist with removing particles from the engine oil, which could potentially be damaging. See our model specific price list for detailed fitment information.
Note: As these items are fi tted with a magnetic stud, we are not able to off er an anodised fi nish as this would interfere with the anodising process.
AVAILABLE ONLY IN NATURAL
Titanium
ALL AVAILABLE IN POLISHED STAINLESS
Stainless Steel
ALL AVAILABLE IN A CHOICE OF 8 COLOURS: BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
Aluminium
MO
TO
RC
YC
LE
PA
RT
S
Aluminium
sales 0044 (0) 1684 851940 www.pro-bolt .com40
Oil Filler Caps
OIL FILLER CAPS
Machined to a smooth finish in your choice of colour – complete with 'O' ring. Each has a hole drilled in the top corner to allow the use of lock wire – complements our engine casing bolt kits to achieve the finished look. 13 fitments available to cover a wide range of models.
Part Number Description Thread & Pitch
LOFCB10 BMW/F650 etc M24mm x 3.00mm
LOFCB20 BMW/R1200GS etc M34mm x 1.50mm
LOFCB30 BMW/S1000R M24mm x 2.00mm
LOFCH10 Honda Standard - some Triumph M20mm x 2.50mm
LOFCH20 Honda BlackBird/VFR Etc M22mm x 3.00mm
LOFCY10 Yamaha Standard M27mm x 3.00mm
LOFCY20 Yamaha XJR1300 M25mm x 1.00mm
LOFCY30 Yamaha R1 (2004+) M27mm x 3.00mm
LOFCK10 Kawasaki Standard M30mm x 1.50mm
LOFCK20 Kawasaki ZX7R M38mm x 1.50mm
LOFCK30 Kawasaki ZX9R (98) M20mm x 2.00mm
LOFCS10 Suzuki & some Aprilia M20mm x 1.50mm
LOFCD1O Ducati & some Aprilia M22mm x 1.50mm
MOTORCYCLE PARTS
ALL AVAILABLE IN A CHOICE OF 8 COLOURS: BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
Aluminium
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14041
Our Fairing Kits include all the necessary bolts and anti-scratch washers to replace bolts on the Top and Side Fairing, Seat Unit, Belly Pan, Mudguard & Hugger. Allen Keys, Pro-Lube & Stickers are also included in the kits. Replacement backing clips are not included as standard – our bolt kits will screw into the original backing clips. Where this is not possible, we do provide replacement nuts or clips for behind the fairing.
Don't forget to order your matching Screen Kit!
FAIRING BOLT KITS
Note: Backing clips are available to order separately in our ancillary section on page 74/75
ALL AVAILABLE IN A CHOICE OF 4 COLOURS: BLUE • GOLD • NATURAL • PURPLE HAZE
Titanium
MO
TO
RC
YC
LE
PA
RT
S
ALL AVAILABLE IN POLISHED STAINLESS
Stainless Steel
ALL AVAILABLE IN A CHOICE OF 8 COLOURS: BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
Aluminium
TITANIUM PARTS
sales 0044 (0) 1684 851940 www.pro-bolt .com42
Our Quick Release Fairing Kits will provide D-Ring 1/4 turn replacements where quick release are present as standard. All other bolts on the Side Fairing, Mudguard, Belly Pan and Seat Unit will be replaced with standard threaded bolts. This will provide a colour consistent finish throughout the fairing.
1/4 TURN QUICK RELEASE FAIRING KITS
Al l Mater ia ls
ALUMINIUM: BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
STAINLESS STEEL: ALL AVAILABLE IN POLISHED STAINLESS
TITANIUM: BLUE • GOLD • NATURAL • PURPLE HAZE
Note: Slide-On & Rivet-On backing plates are available on page 74/75
Model of BikeAluminium D-Ring Aluminium
Allen Key DriveStainless Steel D-Ring
Stainless Steel Allen Key Drive
Titanium D-Ring
ApriliaRSV Mille (00-02) FOAP100QR FOAP100QRAK FOAP100QRSS FOAP100QRAKSS FOAP100QRTI
RSVR (02-03) FOAP110QR FOAP110QRAK FOAP110QRSS FOAP110QRAKSS FOAP110QRTI
RSVR Factory (05) FOAP120QR FOAP120QRAK FOAP120QRSS FOAP120QRAKSS FOAP120QRTI
RSVR Factory (06+) FOAP130QR FOAP130QRSS FOAP130QRTI
Ducati748/916/996 FDU032QR FDU032QRAK FDU032QRSS FDU032QRAKSS FDU032QRTI
749R FDU110QR FDU110QRSS FDU110QRTI
999R FDU150QR FDU115QRSS FDU115QRTI
HondaVFR400/NC30 FHO040QR FHO040QRAK FHO040QRSS FHO040QRAKSS FHO040QRTI
RVF400R/NC35 FHO042QR FHO042QRAK FHO042QRSS FHO042QRAKSS FHO042QRTI
VFR750 (94/97) FHO135QR FHO135QRAK FHO135QRSS FHO135QRAKSS FHO135QRTI
TriumphDaytona 955i FTR082QR FTR082QRAK FTR082QRSS FTR082QRAKSS FTR082QRTI
T595/955i FTR120QR FTR120QRAK FTR120QRSS FTR120QRAKSS FTR120QRTI
YamahaR1 (98-99) FYA397QR FYA397QRAK FYA397QRSS FYA397QRAKSS FYA397QRTI
R1 (00-01) FYA398QR FYA398QRAK FYA398QRSS FYA398QRAKSS FYA398QRTI
R1 (02-03) FYA399QR FYA399QRAK FYA399QRSS FYA399QRAKSS FYA399QRTI
R1 (04-06) FYA400QR FYA400QRAK FYA400QRSS FYA400QRAKSS FYA400QRTI
R1 (07-08) FYA405QR FYA405QRAK FYA405QRSS FYA405QRAKSS FYA405QRTI
R1 (09-10) FYA406QR FYA406QRAK FYA406QRSS FYA406QRAKSS FYA406QRTI
MV AgustaF4 FMVA100QR FMVA100QRAK FMVA100QRSS FMVA100QRAKSS FMVA100QRTI
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14043
Screen Kits include the specifi ed amount of 5mm Screen Bolts, Nylon Washers and Rubber Nuts with Brass Insert. 4mm fi ne pitch Screen Kits are also available for Ducati, MV Agusta, Cagiva and Aprilia Factory RSVR. Finish the look with our model specifi c Fairing Bolt Kits.
SCREEN BOLT KITS
DescriptionAluminium Part Number
Stainless Steel Part Number
Titanium Part Number
4 Bolt Standard Kit SK4 SK4SS TISK4
5 Bolt Standard Kit SK5 SK5SS TISK5
6 Bolt Standard Kit SK6 SK6SS TISK6
7 Bolt Standard Kit SK7 SK7SS TISK7
8 Bolt Standard Kit SK8 SK8SS TISK8
9 Bolt Standard Kit SK9 SK9SS TISK9
10 Bolt Standard Kit SK10 SK10SS TISK10
7 Bolt 4mm Diameter Fine Pitch Special Kit SKDUC7 SKDUC7SS TISKDUC7
9 Bolt 4mm Diameter Fine Pitch Special Kit SKDUC9 SKDUC9SS TISKDUC9
14 Bolt 4mm Diameter Fine Pitch Special Kit SKDUC14 SKDUC14SS TISKDUC14
Al l Mater ia ls
ALUMINIUM:BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
STAINLESS STEEL:ALL AVAILABLE IN POLISHED STAINLESS
TITANIUM:BLUE • GOLD • NATURAL • PURPLE HAZE
MO
TO
RC
YC
LE
PA
RT
S
sales 0044 (0) 1684 851940 www.pro-bolt .com44
These are the bolts that fit into the fuel cap surround - they are available for all bikes including the specially engineered Honda bolts. Kits are very easy to fit - remove one bolt at a time and replace with the identical length Pro-Bolt.
FUEL CAP BOLT KIT
MOTORCYCLE PARTS
ALL AVAILABLE IN POLISHED STAINLESS
Stainless Steel
ALL AVAILABLE IN A CHOICE OF 8 COLOURS: BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
Aluminium
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14045
BAR ENDS
Replace lost or damaged Steel Bar Ends and put some colour where you can see it! Smooth fi nish and comes complete with necessary fi ttings.
MO
TO
RC
YC
LE
PA
RT
S
ALL AVAILABLE IN A CHOICE OF 8 COLOURS: BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
Aluminium
DescriptionAluminium Part Number
Pair of Bar Ends for Hollow Bars BARENDUN10
Pair of Yamaha Bar Ends - R1 etc BARENDYA10
Pair of Yamaha Bar Ends - R6 etc BARENDYA20
Pair of Kawasaki Bar Ends - ZX6 / ZX9 BARENDKA10
Pair of Kawasaki Bar Ends - ZX7 / ZX12 BARENDKA20
Pair of Kawasaki Bar Ends - GPZ / Z1000 / ZZR BARENDKA30
Pair of Kawasaki Bar Ends - ZX10R (2006) BARENDKA40
Pair of Honda Bar Ends - CBR600 / CBR900 etc BARENDHO10
Pair of Honda Bar Ends - SP1/SP2 BARENDHO20
Pair of Honda Bar Ends - Hornet '07 BARENDHO30
Pair of Aprilia Bar Ends - RSV Mille etc BARENDAP10
Pair of Aprilia Bar Ends - RS125 / Pegaso BARENDAP20
Pair of Aprilia Bar Ends - RSV/Factory/Tuono BARENDAP30
Pair of Suzuki Bar Ends - GSXR600 K1/K2 BARENDSU10
Pair of Suzuki Bar Ends - SV650/GSXR750/SRAD/GSXR1100 - etc BARENDSU20
Pair of Suzuki Bar Ends - SV650 / SV1000 / TL1000 etc BARENDSU30
Pair of Suzuki Bar Ends - GSXR1300 etc BARENDSU40
Pair of Suzuki Bar Ends - GSXR600 etc BARENDSU50
Pair of Suzuki Bar Ends - GSXR1000 K6/Other BARENDSU60
Pair of BMW bar Ends - F650/F800GS BARENDBM10
Pair of BMW Bar Ends - S1000RR BARENDBM20
sales 0044 (0) 1684 851940 www.pro-bolt .com46
TOP YOKE NUTS
Replace damaged or rusty Centre Stem Nuts with something rather more colourful. See our price list for fitment details.
DescriptionThread & Pitch
Socket Size
Aluminium Part Number
Titanium Part Number
Domed with Breather Hole 24mm x 1.00 30mm LTYOKE10
Domed 24mm x 1.00 30mm N/A TIYOKE10
Domed 25mm x 1.00 36mm LTYOKE20 TIYOKE20
Domed 24mm x 1.50 32mm LTYOKE30 TIYOKE30
Domed 28mm x 1.00 35mm LTYOKE40 TIYOKE40
Domed 22mm x 1.00 30mm LTYOKE50 TIYOKE50
Domed with Breather Hole 22mm x 1.00 30mm LTYOKE50D TIYOKE50D
Triumph Top Yoke Nut 22mm x 1.25 N/A LTYOKE100 N/A
Top yoke nuts
MOTORCYCLE PARTS
ALL AVAILABLE IN A CHOICE OF 8 COLOURS: BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
Aluminium
ALL AVAILABLE IN A CHOICE OF 4 COLOURS: BLUE • GOLD • NATURAL • PURPLE HAZE
Titanium
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14047
PRE-LOAD ADJUSTERS
HEXAGON FITMENTDescription
Aluminium Part Number
Pre-Load 14mm PLOAD14
Pre-Load 14mm - Thinner Fork Tops PLOAD14-T
Pre-Load 17mm PLOAD17
Pre-Load 19mm PLOAD19
Pre-Load 22mm PLOAD22
They look fantastic and are also functional. Allows easy adjustment of fork spring compression, to adapt to pillion passengers and diff erent road types. Supplied with steel grub screws to hold in place and an allen key to fi t. Sizes available to fi t most models.
Please Note: These may not be compatible if a steering damper is fi tted.
MO
TO
RC
YC
LE
PA
RT
S
ALL AVAILABLE IN A CHOICE OF 8 COLOURS: BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
Aluminium
FLAT/ROUNDED FITMENTDescription
Aluminium Part Number
Pre-Load 18/14mm PLOAD1814
Pre-Load 20/17mm PLOAD2017
Example: PLOAD14 - 14mm
14mm
Example: PLOAD1814 - 18/14mm14mm18mm
sales 0044 (0) 1684 851940 www.pro-bolt .com48
CABLE ADJUSTERS
DIAL ADJUSTERS
Exact replicas of the originals – easy to replace and colour where you can see it!
Used on many models of Honda, Kawasaki, Suzuki & Yamaha.
DescriptionAluminium Part Number
1-4 position Dial Adjuster - many Suzuki LDA10
1-5 position Dial Adjuster - some Kawasaki LDA30
'Spin' type Dial Adjuster - many Honda & Kawasaki LDA20
DescriptionAluminium Part Number
2 piece M8 thread LCA10
1 piece M10 thread LCA20
MOTORCYCLE PARTS
ALL AVAILABLE IN A CHOICE OF 8 COLOURS: BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
Aluminium
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14049
RESERVOIR CAPS
DescriptionAluminium Part Number
Threaded Round Cap - 61mm o/d RESR10
2 Screws Round Cap - 56mm o/d - with 50mm bolts RESR20
2 Screws Round Cap - 56mm o/d - with 15mm bolts RESR20-CS415
2 Screws Round Cap - 56mm o/d - with 45mm bolts RESR20-CS445
Threaded Round Cap - 38mm o/d RESR30
Threaded Round Cap - 42mm o/d RESR50
2 Screws 2 x 45 Round Cap - 53mm o/d Brembo RESR60
Threaded Round Cap - 39mm o/d Brembo RESR70
Threaded Round Cap - 56mm o/d RESR80
Threaded Round Cap - 48mm o/d RESR90
Oblong 43 x 75mm RESO10
Oblong 37 x 55mm - with 15mm Bolts RESO20
Oblong 37 x 55mm - with 20mm Bolts RESO20-20
Oblong 37 x 55mm - with 45mm Bolts RESO20-45
Oblong 43 x 85mm RESO30
Oblong 47 x 69mm RESO40
Oblong 57 x 33mm RESO50
Superb smooth fi nish in a colour of your choice – literally in your face! Get rid of ugly plastic stock originals. We off er a wide range of Reservoir Caps to fi t front brake, clutch and rear brake cylinders on a wide range of models. Comes complete with Countersunk Bolts where necessary. Measurements are the outside diameter.
RESERVOIR CLIPS
To complement our top selling Reservoir Cap, this clip works with our Reservoir Cap part number ‘RESR10’. This will replace your original mild steel clip – choose a complementing or contrasting colour to your Reservoir Cap. Supplied with matching bolt.
MO
TO
RC
YC
LE
PA
RT
S
ALL AVAILABLE IN A CHOICE OF 8 COLOURS: BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
Aluminium
sales 0044 (0) 1684 851940 www.pro-bolt .com50
Nice touch to customise your machine and easy to fit. When fitting, allow that one end will be a reverse thread.
Male 6mm rods are supplied with standard and left hand thread nuts to complete the look.
For reference purposes and for customised projects, we list below total length and specify whether fitment is male or female.
GEAR SHIFT RODS
DescriptionAluminium Part Number
Gear Shift Rod Female - 6mm Thread/6mm Thread - 145mm Overall Length GRODF66145
Gear Shift Rod Female - 6mm Thread/6mm Thread - 150mm Overall Length GRODF66150
Gear Shift Rod Female - 6mm Thread/6mm Thread - 154mm Overall Length GRODF66154
Gear Shift Rod Female - 6mm Thread/6mm Thread - 162mm Overall Length GRODF66162
Gear Shift Rod Female - 6mm Thread/6mm Thread - 170mm Overall Length GRODF66170
Gear Shift Rod Female - 6mm Thread/6mm Thread - 176mm Overall Length GRODF66176
Gear Shift Rod Female - 6mm Thread/6mm Thread - 180mm Overall Length GRODF66180
Gear Shift Rod Female - 6mm Thread/6mm Thread - 184mm Overall Length GRODF66184
Gear Shift Rod Female - 6mm Thread/6mm Thread - 210mm Overall Length GRODF66210
Gear Shift Rod Female - 6mm Thread/6mm Thread - 255mm Overall Length GRODF66255
Gear Shift Rod Female - 6mm Thread/6mm Thread - 272mm Overall Length GRODF66272
Gear Shift Rod Female - 6mm Thread/6mm Thread - 284mm Overall Length GRODF66284
Gear Shift Rod Female - 6mm Thread/8mm Thread - 214mm Overall Length GRODF68214
Gear Shift Rod Female - 6mm Thread/8mm Thread - 240mm Overall Length GRODF68240
Gear Shift Rod Male - 6mm Thread/6mm Thread - 140mm Overall Length GRODM66140
Gear Shift Rod Male - 6mm Thread/6mm Thread - 149mm Overall Length GRODM66149
Gear Shift Rod Male - 6mm Thread/6mm Thread - 163mm Overall Length GRODM66163
Gear Shift Rod Male - 6mm Thread/6mm Thread - 188mm Overall Length GRODM66188
Gear Shift Rod Male - 6mm Thread/6mm Thread - 190mm Overall Length GRODM66190
Gear Shift Rod Male - 6mm Thread/6mm Thread - 195mm Overall Length GRODM66195
Gear Shift Rod Male - 6mm Thread/6mm Thread - 197mm Overall Length GRODM66197
Gear Shift Rod Male - 6mm Thread/6mm Thread - 220mm Overall Length GRODM66220
Gear Shift Rod Male - 6mm Thread/6mm Thread - 224mm Overall Length GRODM66224
PADDOCK STAND BOBBINS
Essential for all bikers! Screws straight into the swingarm, showing no ugly steel bolts. Available in M6, M8 & M10 .
DescriptionAluminium Part Number
Pair of M6 Paddock Stand Bobbins BOB6
Pair of M8 Paddock Stand Bobbins BOB8
Pair of M10 Paddock Stand Bobbins BOB10
ALL AVAILABLE IN A CHOICE OF 8 COLOURS: BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
Aluminium
MOTORCYCLE PARTS
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14051
CHAIN ADJUSTER BLOCKS
Smarten up your rear end! Replace rusty stock originals with these shiny new blocks – supplied in pairs.
DescriptionAluminium Part Number
Aprilia RSV (98-03) Falco, Tuono Pair of Blocks CABPRA10
Aprilia RSV/R (2004+) Pair of Blocks CABPRA20
Honda CBR900RR (00-03) Pair of Blocks CABPRH10
Honda SP1/SP2 Pair of Blocks CABPRH20
Honda CB1300 Pair of Blocks CABPRH30
Honda CBR1000 ‘08+ Pair of Blocks CABPRH50
Kawasaki ZXR400/ZX7/ZX9 Pair of Blocks CABPRLEFTK10
Kawasaki KLX250/Versys 650 Pair of Blocks CABPRLEFTK20
Kawasaki ZX6/ZX7/ZX9/ZX12 Pair of Blocks CABPRK10
Kawasaki ZX10R (2004-2005) Pair of Blocks CABPRK20
Kawasaki ZX10R ‘06+ Pair of Blocks CABPRK40
Kawasaki ZX10R ‘08 Pair of Blocks CABPRK50
Suzuki GSXR600/750/1000/TL1000/GSXR1300 Pair of Blocks CABPRS10
Suzuki 1200 Bandit Pair of Blocks CABPRS20
Yamaha R6 (98-02) / R1(98-03) Pair of Blocks CABPRY10
Yamaha R6 (03+) / R1 Pair of Blocks CABPRY20
Yamaha R1 (04+) / R1 Pair of Blocks CABPRY40
Yamaha XJR1200/1300 Pair of Blocks CABPRY50
Yamaha XJR1300SP Pair of Blocks CABPRY60
CHAIN ADJUSTER BOLTS & NUTSFor use with the Chain Adjuster Blocks above. Smartens up the swingarm and very easy to fi t. Available individually or in sets:
DescriptionTitanium Part Number
Length of bolt
Individual M8 x 45mm Chain Adjuster Bolt TIAXLEADJ845 45mm
Individual M8 x 50mm Chain Adjuster Bolt TIAXLEADJ850 50mm
Individual M8 x 55mm Chain Adjuster Bolt TIAXLEADJ855 55mm
Individual M8 x 60mm Chain Adjuster Bolt TIAXLEADJ860 60mm
Chain Adjuster Bolt & Nut Set - Pair of M8 x 45mm Bolts & Nuts TIAXLE845SET 45mm
Chain Adjuster Bolt & Nut Set - Pair of M8 x 55mm Bolts & Nuts TIAXLE855SET 55mm
Chain Adjuster Bolt & Nut Set - Pair of M8 x 60mm Bolts & Nuts TIAXLE860SET 60mm
Description
Stainless Steel Part Number
Length of bolt
Individual M8 x 45mm Chain Adjuster Bolt LSSAXLEADJ845 45mm
Individual M8 x 55mm Chain Adjuster Bolt LSSAXLEADJ855 55mm
Chain Adjuster Bolt & Nut Set - Pair of M8 x 45mm Bolts & Nuts SSAXLE845SET 45mm
Chain Adjuster Bolt & Nut Set - Pair of M8 x 55mm Bolts & Nuts SSAXLE855SET 55mm
ALL AVAILABLE IN A CHOICE OF 8 COLOURS: BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
Aluminium
ALL AVAILABLE IN A CHOICE OF 4 COLOURS: BLUE • GOLD • NATURAL • PURPLE HAZE
Titanium
ALL AVAILABLE IN POLISHED STAINLESS
Stainless Steel
MO
TO
RC
YC
LE
PA
RT
S
sales 0044 (0) 1684 851940 www.pro-bolt .com52
SPROCKET NUTS
Put some colour in your nuts! Manufactured using aerospace grade alloy with rolled threads for extra strength.
Note: Refer to the Pro-Bolt fitting and torque instructions provided. These products are specifically designed and manufactured in Aluminium and therefore we specify a torque setting of 33lbsft/44Nm which is significantly lower than manufacturer’s steel originals.
DescriptionAluminium Part Number
Set of 6 10mm x 1.25mm pitch - most models SPN10
Set of 6 12mm x 1.25mm pitch - some Honda
and large CC Suzuki
SPN12
ALL AVAILABLE IN A CHOICE OF 8 COLOURS: BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
Aluminium
MOTORCYCLE PARTS
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14053
DescriptionStainless Steel Part Number
Titanium Part Number
M8 x 1.25mm Sprocket Nut - Individual
LSSSPN8 TISPN8
M8 x 1.25mm Sprocket Nut - Set of 6
SS6SPN8 TI6SPN8
M10 x 1.00mm Sprocket Nut - Individual (used on Ducati 1098)
LSSSPN10F TISPN10F
M10 x 1.00mm Sprocket Nut - Set of 6 (used on Ducati 1098)
SS6SPN10F TI6SPN10F
M10 x 1.25mm Sprocket Nut - Individual
LSSSPN10 TISPN10
M10 x 1.50mm Sprocket Nut - Individual
LSSSPN10C TISPN10C
M10 x 1.25mm Sprocket Nut - Set of 5
SS5SPN10 TI5SPN10
M10 x 1.25mm Sprocket Nut - Set of 6
SS6SPN10 TI6SPN10
M10 x 1.50mm Sprocket Nut - Set of 6 (used on some models of Aprilia)
SS6PN10C TI6SPN10C
M12 x 1.25mm Sprocket Nut - Individual
LSSSPN12 TISPN12
M12 x 1.25mm Sprocket Nut - Set of 5
SS5SPN12 TI5SPN12
M12 x 1.50mm Sprocket Nut - Individual
LSSSPN12C TISPN12C
M12 x 1.50mm Sprocket Nut - Set of 5
SS5SPN12C TI5SPN12C
SPROCKET NUTS
Both Stainless Steel and Titanium Sprocket Nuts should be torqued to your manufacturer’s recommended setting.
SPROCKET NUTS BI-HEXItalian inspired design. Titanium 12 point Bi-Hex Sprocket Nuts. Available individually or in sets of 5 and 6.
MO
TO
RC
YC
LE
PA
RT
S
ALL AVAILABLE IN A CHOICE OF 4 COLOURS: BLUE • GOLD • NATURAL • PURPLE HAZE
Titanium
ALL AVAILABLE IN POLISHED STAINLESS
Stainless Steel
DescriptionTitanium Part Number
Set of 5 - 10mm x 1.25 pitch Nut TI5SPN10BH
Set of 6 - 10mm x 1.25 pitch Nut TI6SPN10BH
TITANIUM PARTS
sales 0044 (0) 1684 851940 www.pro-bolt .com54
AXLE NUTS & SWING ARM NUTS
Replace rusty originals with these light, bright and sexy alternatives. In most cases, our Axle Nuts are manufactured with a captive washer. For fitment intended to a specific model of bike, please refer to our model specific price list or website page. The following table is provided as a list of Threads, Thread Pitches, Socket Sizes and Heights.
Description Thread Pitch Height FlangeDiameter
SocketSize
TitaniumPart Number
StainlessPart Number
Axle Nut Flanged AF22 16mm 1.50mm 16mm 32mm 22mm TINUT16150001
Axle Nut Flanged AF27 18mm 1.50mm 14mm 31mm 27mm TINUT18150001 LSSNUT18150001
Axle Nut Flanged AF24 18mm 1.50mm 18mm 32mm 24mm TINUT18150002 LSSNUT18150002
Axle Nut Flanged Castellated AF27mm 18mm 1.50mm 17.8mm 31mm 27mm TINUT18150003 LSSNUT18150003
Axle Nut Flanged Castellated AF24 18mm 1.50mm 17.8mm 31mm 24mm TINUT18150005
Axle Nut Flanged AF26 20mm 1.50mm 11.2mm 30mm 26mm TINUT20150001
Axle Nut Flanged AF27 20mm 1.50mm 15.2mm 35mm 27mm TINUT20150002
Axle Nut Flanged AF27mm 20mm 1.50mm 15.8mm 32mm 27mm TINUT20150003
Axle Nut Flanged AF32 22mm 1.50mm 15mm 27mm 32mm TINUT22150001 LSSNUT22150001
Axle Nut Flanged Castellated AF32mm 24mm 1.50mm 24mm 38mm 32mm TINUT24150001 LSSNUT24150001
Axle Nut Flanged AF32 24mm 1.50mm 18mm 39mm 32mm TINUT24150002 LSSNUT24150002
Axle Nut Flanged AF28 M25 (748/916/996) 25mm 1.25mm 33.3mm 33mm 28mm TINUT25125001
Axle Nut Flanged AF30 (Ducati Monster 1000 Sie) 25mm 1.25mm 10mm 37mm 30mm TINUT25125002
Axle Nut Flanged AF30 25mm 1.50mm 10mm 35mm 30mm TINUT25150001
Axle Nut Flanged Plastic Nyloc AF32 25mm 1.50mm 13mm 37.7mm 32mm TINUT25150002
Axle Nut Flanged AF36 25mm 1.50mm 18mm 43mm 36mm TINUT25150003 LSSNUT25150003
Axle Nut Flanged Castellated AF32 25mm 1.50mm 21mm 38mm 32mm TINUT25150004
Axle Nut Flanged AF36 30mm 1.50mm 12mm 44mm 36mm TINUT30150001
Yamaha Swingarm Captive Nut (R1 ‘07-’08 Right Side) 32mm 1.00mm 11mm 45mm 34mm TINUT32100001
Axle Nut Flanged AF41 (Ducati 748/916/996) 33mm 1.25mm 14.5mm 49mm 41mm TINUT33125002
Axle Nut Flanged Castellated AF46 (748/916/996) 38mm 1.50mm 28mm 63mm 46mm TINUT38150001
Axle Nut Flanged Bi-hex with Cone (Ducati 1098 AF61) 48mm 1.50mm 35mm 74mm 61mm TINUT48150001
Axle Nut Flanged Bi-hex AF61 (MV Agusta) 48mm 1.50mm 35mm 75mm 61mm TINUT48150002
ALL AVAILABLE IN A CHOICE OF 4 COLOURS: BLUE • GOLD • NATURAL • PURPLE HAZE
Titanium
ALL AVAILABLE IN POLISHED STAINLESS
Stainless Steel
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14055
AXLE BOLTS & SLEEVES
Axle Bolts bear the brunt of the elements and salt water, therefore they corrode quickly. Replace them with Stainless Steel or our Titanium version.
DescriptionStainless Steel Part Number
TitaniumPart Number
Front Wheel Axle Bolt – M14 x 1.50mm – 22mm Socket SizeFits many Honda Models
LSSSPH001 TISPHO01
Front Wheel Axle Bolt – M18 x 1.50mm – 22mm Socket SizeFits Many Honda Models
N/A TISPHO03
Multi Fit SPECIALS
DescriptionStainless Steel Part Number
TitaniumPart Number
Front Wheel Axle Bolt / Swingarm BoltFits Triumph Daytona/Speed Triple
N/A TISPTRI01
Triumph SPECIALS
DescriptionStainless Steel Part Number
TitaniumPart Number
Front Wheel Axle Sleeve Fits Kawasaki ZXR636/ZX10R ‘06+
N/A TISPKAW11
Kawasaki SPECIALS
MO
TO
RC
YC
LE
PA
RT
S
ALL AVAILABLE IN A CHOICE OF 4 COLOURS: BLUE • GOLD • NATURAL • PURPLE HAZE
Titanium
ALL AVAILABLE IN POLISHED STAINLESS
Stainless Steel
sales 0044 (0) 1684 851940 www.pro-bolt .com56
DISC ROTOR BOLTS
Aprilia/Ducati Allen Key
M8
Titanium - TIDISCDUC10Stainless Steel - LSSDISCDUC10
Ducati
M8
Titanium - TIDISCDUC20Stainless Steel - N/A
M6
Honda FrontTitanium - TIDISCHONFRStainless Steel - LSSDISCHONFR
24
M8
Honda RearTitanium - TIDISCHONREStainless Steel - LSSDISCHONRE
BMW
Titanium - TIDISCBMW002Stainless Steel - LSSDISCBMW002
BMW
Titanium - TIDISCBMW001Stainless Steel - LSSDISCBMW001
28
M8
Note: Below are common bolts used by aftermarket wheel manufacturers. However, fitment may vary, so please
use these profiles to compare with your originals and verify.
Ducati Titanium - TIDISCDUC40Stainless Steel - LSSDISCDUC40
20
M8
Ducati Titanium - TIDISCDUC50Stainless Steel - LSSDISCDUC50
13
M8
BMW
Titanium - TIDISCBMWStainless Steel - LSSDISCBMW
M8
25
Titanium - TIDISCPVMStainless Steel - N/A
Aftermarket PVM
15
M8
Aftermarket Braking
20
M8
Titanium - TIDISCBRAKE10Stainless Steel - N/A
Aftermarket BrakingTitanium - TIDISCBRAKE20Stainless Steel - N/A
M8
Aftermarket Galespeed Front
M6
Titanium - TIDISCGALE10Stainless Steel - N/A
Aftermarket Galespeed Rear
M6
Titanium - TIDISCGALE20Stainless Steel - N/A
M8
20
MOTORCYCLE PARTS
Ducati
Titanium - TIDISCDUC30Stainless Steel - LSSDISCDUC30
M6
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14057
M6
M8
M8
M8
M8
20
M8
M8 M8
Triumph
Kawasaki
Suzuki
Suzuki Suzuki
Kawasaki
Triumph
Yamaha Yamaha Yamaha
22
M8
M8
Kawasaki
M8
Titanium - TIDISCKAWStainless Steel - LSSDISCKAW
Titanium - TIDISCKAW20Stainless Steel - N/A
Titanium - TIDISCKAW30Stainless Steel - N/A
Titanium - TIDISCSUZStainless Steel - LSSDISCSUZ
Titanium - TIDISCGSXRStainless Steel - LSSDISCGSXR
Titanium - TIDISCSUZ20Stainless Steel - LSSDISCSUZ20
Titanium - TIDISCTRIFRStainless Steel - LSSDISCTRIFR
Titanium - TIDISCTRIREStainless Steel - LSSDISCTRIRE
Titanium - TIDISCYAMStainless Steel - LSSDISCYAM
Titanium - TIDISCR1R6Stainless Steel - LSSDISCR1R6
Titanium - TIDISCYAM20Stainless Steel - LSSDISCYAM20
Many of these bolts are suitable replacements for Footrest Hanger Bolts and Subframe Bolts.
Suzuki Titanium - TIDISCSUZ10Stainless Steel - LSSDISCSUZ10
20
M6
MO
TO
RC
YC
LE
PA
RT
S
ALL AVAILABLE IN A CHOICE OF 4 COLOURS: BLUE • GOLD • NATURAL • PURPLE HAZE
Titanium
ALL AVAILABLE IN POLISHED STAINLESS
Stainless Steel
sales 0044 (0) 1684 851940 www.pro-bolt .com58
CALIPER PARTS
For those who value real attention to detail! M7, M8 and M10 and special M8 for Ducati.
Bleed Nipples
Manufacturer Front Rear Clutch
Honda M8 x 1.25mm M8 x 1.25mm M8 x 1.25mm
Kawasaki M7 x 1.00mm M7 x 1.00mm M8 x 1.25mm
Suzuki M7 x 1.00mm M7 x 1.00mm M8 x 1.25mm
Yamaha M8 x 1.25mm M8 x 1.25mm M8 x 1.25mm
Ducati M8 x 1.25mm M8 x 1.25mm M8 x 1.25mm
Triumph - Late M8 x 1.25mm M8 x 1.25mm M8 x 1.25mm
BMW Pre 1996 M10 x 1.00mm M10 x 1.00mm
BMW 1996+ M10 x 1.00mm
BMW K Models M10 x 1.00mm M10 x 1.00mm
Pad Pin Grub Screw. Manufactured with a 5mm allen key drive.
Grub Screws
Titanium Part Number
Stainless Steel Part Number
TIPINGRUB LSSPINGRUB
DescriptionStainless Steel Part Number
Titanium Part Number
M7 x 1.00mm LSSBN7 TIBN7
M7 x 1.00mm (Shallow) LSSBN7KAW TIBN7KAW
M8 x 1.25mm LSSBN8 TIBN8
M8 Special Ducati x 1.25mm N/A TIBN8-DUCATI
M10 x 1.00mm LSSBN10 TIBN10
ALL AVAILABLE IN A CHOICE OF 4 COLOURS: BLUE • GOLD • NATURAL • PURPLE HAZE
Titanium
ALL AVAILABLE IN POLISHED STAINLESS
Stainless Steel
MOTORCYCLE PARTS
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14059
Banjo Bolts
MO
TO
RC
YC
LE
PA
RT
S
ALL AVAILABLE IN A CHOICE OF 4 COLOURS: BLUE • GOLD • NATURAL • PURPLE HAZE
Titanium
ALL AVAILABLE IN POLISHED STAINLESS
Stainless Steel
Available in Hex Head, Double and Single Sizes. We also now offer a pre-drilled ‘Race Spec’ version designed for Racers for ease of lockwiring.
We also offer an Allen Key version in 1.25mm pitch. Banjo bolts are supplied with copper washers.
Note: Banjo bolts should be fitted ‘dry’ without any lubricant.
DescriptionStainless Steel Part Number
Titanium Part Number
HEX HEADSingle Banjo M10 x 1.25mm LSSBANJOS10 TIBANJOS10
Single Banjo M10 x 1.25mm Race Spec LSSBANJOS10R TIBANJOS10R
Single Banjo M10 x 1.00mm LSSBANJOS10F TIBANJOS10F
Single Banjo M10 x 1.00mm Race Spec LSSBANJOS10FR TIBANJOS10FR
Single Banjo M10 x 1.00mm (with integral bleed nipple) LSSBANJOS10FBN TIBANJOS10FBN
Double Banjo M10 x 1.25mm LSSBANJOD10 TIBANJOD10
Double Banjo M10 x 1.25mm Race Spec LSSBANJOD10R TIBANJOD10R
Double Banjo M10 x 1.00mm LSSBANJOD10F TIBANJOD10F
Double Banjo M10 x 1.00mm Race Spec LSSBANJOD10FR TIBANJOD10FR
ALLEN KEY DRIVESingle Banjo M10 x 1.25mm LSSBANJOS20 TIBANJOS20
sales 0044 (0) 1684 851940 www.pro-bolt .com60
CALIPER PAD RETAINING PINS
Titanium - TIPINBP007Stainless Steel - N/A
TokicoTitanium - TIPINBP006Stainless Steel - N/A
Nissin
Titanium - TIPINBP005RStainless Steel - SSPINBP005R
NissinTitanium - TIPINBP004RStainless Steel - SSPINBP004R
Tokico
Titanium - TIPINBP003RStainless Steel - LSSPINBP003R
Nissin
MOTORCYCLE PARTS
Titanium - TIPINBP001Stainless Steel - N/A
Nissin
Titanium - TIPINBP002RStainless - SSPINBP002R
Nissin
Internal fitment of Pad Pins are replicas of originals. Our most popular Pins are supplied with an external Hex Head, which has been drilled to allow for lockwire.
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14061
Titanium - TIPINBP008Stainless Steel - N/A
Sumitomo
Titanium - TIPINBP010Stainless Steel - N/A
TokicoTitanium - TIPINBP011RStainless LSSPINBP011R
Tokico
Titanium - TIPINBP012Stainless Steel - N/A
Brembo
Titanium - TIPINBP015Stainless Steel - N/A
Suzuki Own Make
MO
TO
RC
YC
LE
PA
RT
S
ALL AVAILABLE IN A CHOICE OF 4 COLOURS: BLUE • GOLD • NATURAL • PURPLE HAZE
Titanium
AVAILABLE IN POLISHED STAINLESS
Stainless Steel
Titanium - TIPINBP009Stainless Steel - N/A
Nissin
Titanium - TIPINBP014Stainless Steel - N/A
Suzuki Own Make
Titanium - TIPINBP017Stainless Steel - N/A
Kawasaki
Titanium - TIPINBP003RStainless Steel - LSSPINBP003R
Nissin
sales 0044 (0) 1684 851940 www.pro-bolt .com62
CALIPER UPGRADES
Look after the most important part of your bike! These kits are an excellent overhaul for your bike’s calipers – it makes sense to change all caliper components when taking the time to bleed the system.
Kit contains: Banjo Bolts, Bleed Nipples, Caliper Pins.
Caliper Refurbishment Kits
Part Number Set of 4 Bolts - Length of Bolt measured from under the head Kit Weight
TIFBRADIALRS55 Set of 4 Race Spec M10 x 55mm x 1.25mm 79gms
TIFBRADIALRS60 Set of 4 Race Spec M10 x 60mm x 1.25mm 84gms
TIFBRADIALRS65 Set of 4 Race Spec M10 x 65mm x 1.25mm 90gms
TIFBRADIALRS70 Set of 4 Race Spec M10 x 70mm x 1.25mm 97gms
TIFBRADIALRS75 Set of 4 Race Spec M10 x 75mm x 1.25mm 100gms
TIFBRADIALRS80 Set of 4 Race Spec M10 x 80mm x 1.25mm 107gms
Race-Spec Radial Caliper Mount Bolt Kits
For standard or upgraded radial calipers – we've now made it easier to order! All our Radial Caliper Kits are metric 10mm x 1.25mm fine pitch with pre-drilled heads for ease of lock-wiring. Kits are available to order by length of required bolt – measurements are taken from below the head.
Part Number Caliper Fits model of bike
TIKITD1000 Brembo Factory, RSV, Tuono
TIKITD1001 Brembo 748, 848, 916, 996, 998
TIKITD1003 Brembo Brembo Aftermarket Racing, Mono Bloc, Radial Mount Calipers,
108 Centre to Centre Mounting Holes
TIKITD2000 Tokico CBR600RR ‘05-’10, CBR1000RR 06-’10
TIKITD2001 Tokico GSXR600 K4-K10, GSXR750 ‘04-’10, GSXR1000 ‘03-’08,
636 B1/B2 03-’04, ZX10R C1/C2 ‘04-05, 636 C1/C2 05-’06
TIKITD2002 Tokico ZX10R ‘08-'10
TIKITD2003 Tokico ZX6R ‘00-’02, ZX12R A1-A2 ‘00-’01
TIKITD2004 Tokico ZX10R ‘06-’07
TIKITD2005 Tokico ZX12 B1/B2 ‘02-’0
TIKITD2006 Tokico GSXR600 K1-K3, GSXR750 Y - K3, GSXR750 K6/K7
TIKITD2007 Tokico SV1000/S ‘03-’04, SV1000/S ‘05+, GSXR1000 K1/K2
TIKITD3000 Sumitomo R6 99+, R1 ‘98+
TIKITD4000 Nissin CBF600F ‘99-’05, CBR900RR ‘98-’03, SP1/SP2,
CBR1100XX Blackbird
TIKITD4001 Nissin CBR900R ‘92-’97, CB900 Hornet ‘01-’05
TIKITD4002 Nissin VTR1000 Firestorm ‘97-’01
TIKITD5000 AP AP Racing, Mono Bloc, Radial Mount Calipers,
108 Centre to Centre Mounting Holes
TIKITD6000 Suzuki GSF600 Bandit ‘00-’04, SV650 ‘03-’04, SV650S ‘03-’04
ALL AVAILABLE IN A CHOICE OF 4 COLOURS: BLUE • GOLD • NATURAL • PURPLE HAZE
Titanium
MOTORCYCLE PARTS
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14063
UNSPRUNG OVERHAUL BOLT KITS
A selection of our most popular un-sprung bolts are presented here in boxes. Bolts included are either Flanged Hex Head or Tapered Socket Cap - the bolt heads replicate the bike’s originals. Kits are available in Stainless Steel and Titanium. Titanium Race Spec is also available for many models. In our Race Spec Kits, we upgrade any Flanged Hex Head Bolts in the Front Axle Pinch and Caliper Mount Bolts to our Pre-drilled Race Spec Style.
Included are:• Front & Rear Disc Bolts • Sprocket Nuts • Front Axle Pinch Bolts • Front Caliper Mount Bolts • Front Caliper Pinch Bolts (where applicable)
Stainless Steel Titanium RaceSpec Fits
SSKITCAP120 TIKITCAP120 TIKITCAP120R Aprilia Factory 04-‘05SSKITCAP130 TIKITCAP130 Aprilia RSVR Factory ’06-‘08SSKITCAP150 TIKITCAP150 Aprilia RSV4 Factory ‘09SSKITCBMW047 TIKITCBMW047 BMW S1000RR ‘10+SSKITCDU032 TIKITCDUC32 TIKITCDU032R Ducati 748/916/996/998 (‘99+ Models)SSKITCDU032-1 TIKITCDUC32-1 TIKITCDU032R-1 Ducati 748/916/996/998 (Pre 99 Models)SSKITCDU150 TIKITCDUC150 TIKITCDU150R Ducati 999SSKITCDU045 TIKITCDU045 Ducati 848SSKITCDU250 TIKITCDU250 TIKITCDU250R Ducati 1098 / 1198SSKITCHO098 TIKITCHO098 TIKITCHO098R Honda CBR600RR ’05-‘06SSKITCHO099 TIKITCHO099 TIKITCHO099R Honda CBR600RR ‘07-‘10SSKITCHO212 TIKITCHO212 TIKITCHO212R Honda CBR1000RR ‘04-‘05SSKITCHO213 TIKITCHO213 TIKITCHO213R Honda CBR1000RR ‘06-‘07SSKITCHO214 TIKITCHO214 TIKITCHO214R Honda CBR1000RR ’08-‘10SSKITCHO207 TIKITCHO207 TIKITCHO207R Honda CB1000R ’08+SSKITCHO217 TIKITCHO217 TIKITCHO217R Honda VTR1000 SP1 / SP2SSKITCKA196 TIKITCKA196 TIKITCKA196R Kawasaki 636 ‘05-‘06SSKITCKA190 TIKITCKA190 TIKITCKA190R Kawasaki ZX6R ’07-‘08SSKITCKA175 TIKITCKA175 Kawasaki ZX6 Ninja ’09-‘10SSKITCKA286 TIKITCKA286 TIKITCKA286R Kawasaki ZX10 ‘06-‘07SSKITCKA287 TIKITCKA287 TIKITCKA287R Kawasaki ZX10 ’08-‘10SSKITCSU077 TIKITCSU077 TIKITCSU077R Suzuki GSR600 2006SSKITCSU095 TIKITCSU095 TIKITCSU095R Suzuki GSXR600 K1-K3SSKITCSU094 TIKITCSU094 TIKITCSU094R Suzuki GSXR600 K4-K5SSKITCSU093 TIKITCSU093 TIKITCSU093R Suzuki GSXR600 K6-K7SSKITCSU148 TIKITCSU148 TIKITCSU148R Suzuki GSXR750 Y-K3SSKITCSU149 TIKITCSU149 TIKITCSU149R Suzuki GSXR750 K4-K5SSKITCSU152 TIKITCSU152 TIKITCSU152R Suzuki GSXR750 K6-K7SSKITCSU093 TIKITCSU093 TIKITCSU093R Suzuki GSXR750 K8-K9SSKITCSU173 TIKITCSU173 TIKITCSU173R Suzuki GSXR1000 K1-K2SSKITCSU174 TIKITCSU174 TIKITCSU174R Suzuki GSXR1000 K3-K4SSKITCSU165 TIKITCSU165 TIKITCSU165R Suzuki GSXR1000 K5-K6SSKITCSU166 TIKITCSU166 TIKITCSU166R Suzuki GSXR1000 K4-K8SSKITCSU163 TIKITCSU163 TIKITCSU163R Suzuki GSXR1000 K9-K10SSKITCSU200 TIKITCSU200 TIKITCSU200R Suzuki GSXR1300 Hayabusa ’99-‘07SSKITCSU205 TIKITCSU205 TIKITCSU205R Suzuki GSXR1300 Hayabusa ’08-‘10SSKITCSU210 TIKITCSU210 TIKITCSU210R Suzuki GSX1300 B-King ‘07+SSKITCSU250 TIKITCSU250 Suzuki GSX1400 ’01-‘07SSKITCTR088 TIKITCTR088 TIKITCTR088R Triumph Daytona 675 ’06-‘08SSKITCYA282 TIKITCYA282 TIKITCYA282R Yamaha R6 ’03-‘04SSKITCYA282-1 TIKITCYA282-1 TIKITCYA282-1R Yamaha R6 ‘05SSKITCYA283 TIKITCYA283 TIKITCYA283R Yamaha R6 ’06-‘10SSKITCYA398 TIKITCYA398 TIKITCYA398R Yamaha R1 ’02-‘03SSKITCYA399 TIKITCYA399 TIKITCYA399R Yamaha R1 ’04-‘06SSKITCYA405 TIKITCYA405 TIKITCYA405R Yamaha R1 ’07-‘08SSKITCYA406 TIKITCYA406 TIKITCYA406R Yamaha R1 Big Bang ’09-‘10SSKITCYA192 TIKITCYA192 TIKITCYA192R Yamaha FZS1000 Fazer ’01-‘05SSKITCYA193 TIKITCYA193 Yamaha FZS1000 Fazer ’06-‘10
MO
TO
RC
YC
LE
PA
RT
S
ALL AVAILABLE IN A CHOICE OF 4 COLOURS: BLUE • GOLD • NATURAL • PURPLE HAZE
Titanium
ALL AVAILABLE IN POLISHED STAINLESS
Stainless Steel
sales 0044 (0) 1684 851940 www.pro-bolt .com64
POPULAR KITS
Front & Rear Caliper Mount Kit
Front & Rear Caliper Pinch Bolt Kit
Supplied in kit form with Copper Grease, these replace the bolts that mount the caliper to the fork legs.
We use either Flanged Hex Head or Tapered Socket Cap Bolts as appropriate when replacing the originals.
Where fitment allows, we also offer a 'Race-Spec' version, where the heads are drilled for ease of lockwiring.
These are the bolts that go through the caliper itself, pinching the caliper together. We also offer the special 'low head profile' Brembo Caliper Pinch Bolts in both Titanium and Stainless Steel.
MOTORCYCLE PARTS
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14065
Supplied in kit form with Copper Grease – these replace the bolts at the bottom of the forks.
Upgrade further to our amazingly low weight Race-Spec bolts. Pre-drilled across the fl ats, reduced socket size and scooped-out head for maximum weight saving with no compromise in strength and safety. These bolts are widely used by top race teams. The most common size bolt – M8 x 40mm – weighs just 9.5gms in Titanium, compared to 18.5gms of the average steel original.
Fork/Axle Bottom Pinch Bolts
Our most popular kit, four M8 x 40mm Race-Spec bolts, weigh in at just 40gms.
MO
TO
RC
YC
LE
PA
RT
S
ALL AVAILABLE IN A CHOICE OF 4 COLOURS: BLUE • GOLD • NATURAL • PURPLE HAZE
Titanium
ALL AVAILABLE IN POLISHED STAINLESS
Stainless Steel
sales 0044 (0) 1684 851940 www.pro-bolt .com66
Brake & Clutch Perch Pinch Bolt Kits
The bolts that pinch together the Brake and Clutch Perches on the handlebars.
Handle Bar Bolt Kits
These bolts pinch the handlebar to the yoke or forks for both retro and clip-on style.
MOTORCYCLE PARTS
NEW
RACE-SPEC
ALUMINIUM
ALL AVAILABLE IN A CHOICE OF 4 COLOURS: BLUE • GOLD • NATURAL • PURPLE HAZE
Titanium
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14067
Supplied in kit form with Copper Grease – these are the fork-to-yoke clamp bolts.
Top & Bottom Triple Clamp Bolt Kits
The bolts that mount the footrest hangers. We off er sets for both front & rear.
Rider & Pillion Footrest Hanger Bolt Kits
ALL AVAILABLE IN POLISHED STAINLESS
Stainless Steel
MO
TO
RC
YC
LE
PA
RT
S
sales 0044 (0) 1684 851940 www.pro-bolt .com68
Scratch & Spark Set
Part Number Description
TISPARK6 Pair of 6mm Allen Key Drive Bolts with colour anodised collar
TISPARK8 Pair of 8mm Allen Key Drive Bolts With colour anodised collar
For those who like to get down, you’ll get some serious sparks from these! Titanium bolts, with your colour choice of alloy collar. We offer 6mm & 8mm Bolts in 20mm lengths. Other lengths can be supplied on request.
Subframe Bolt Kit
These are the bolts that hold the main sub-frame on. Where necessary supplied with Washers and Nyloc Nuts.
MOTORCYCLE PARTS
ALL AVAILABLE IN A CHOICE OF 4 COLOURS: BLUE • GOLD • NATURAL • PURPLE HAZE
Titanium
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14069
Aprilia
Part Number Description
A TISPAP12 Titanium RSVR 2002-2003 Front Caliper Mount Bolt
- M10 x 1.25 x 28mm
B TISPAP14 Titanium RSVR/Other Rear Brake Pivot Bolt
SPECIAL PARTS
Also see our Axle Nuts, Disc Bolts & Caliper Pins.
BMW
SP
EC
IAL
PA
RT
S
ALL AVAILABLE IN POLISHED STAINLESS
Stainless Steel
B
A
B
A
D
C
Part Number Description
A LSSSPBMW03 Individual Frame Adjusting Nut – F800 series, 800S, 800ST
A SSSPBMW03-4 Set of 4 Frame Adjusting Nuts – F800 series, 800S, 800ST
B SSSPBMW04-8 Set of 8 Cylinder Head Rocker Head Cover Bolts & Washers – Boxer Engines
C SSSPBMW06-4 Set of 4 Cylinder Head Rocker Head Cover Bolts & Washers – Boxer Engines
D LSSSPBMW05 Wheel Bolt for Cast Wheels – M10 x 1.25mm x 40mm
D SSSPBMW05-5 Set of 5 Wheel Bolts for Cast Wheels – M10 x 1.25mm x 40mm
The following parts are available in polished Stainless Steel
sales 0044 (0) 1684 851940 www.pro-bolt .com70
Ducati
Titanium
Part Number Description
A TISPDUC01 748/916/996/998 - Front Caliper Pinch Bolt
B TISPDUC01-8 748/916/996/998 - Front Caliper Pinch Bolts - Set of 8
C TISPDUC03 748/916/996/998 - Rear Hub Pinch Bolt
D TISPDUC14 749/916/996/998 Side Stand Pivot Bolt
E TISPDUC40 1098 Rear Hub Pinch Bolt - M12 x 40mm
F TISPDUC37 1098 Swingarm Pivot Shaft & Nut
G TISPDUC23 Monster Footrest Hanger Bolt M10 x 47mm
H TISPDUC26 Monster Footrest Hanger Bolt M10 x 58mm
I TISPDUC24 Monster Footrest Hanger M10 x 37mm
J TISPDUCAXLESET Full set of Axle Nuts
Stainless Steel
Part Number Description Fits Models
LSSSPDUC01 Front Caliper Pinch Bolt M8 x 40mm - low head profile
748/916/996/998
AluminiumPart Number Description Fits Models
DUCAXLESET Full set of 3 Axle Nuts 748/916/996/998
LDUCNUT40 Front Spindle Collar 848/1098
SPECIAL PARTS
Al l Mater ia ls
ALUMINIUM: BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
STAINLESS STEEL: ALL AVAILABLE IN POLISHED STAINLESS
TITANIUM: BLUE • GOLD • NATURAL • PURPLE HAZE
I
G
E
H
A
DF
C
B
J
ALL AVAILABLE IN A CHOICE OF 4 COLOURS: BLUE • GOLD • NATURAL • PURPLE HAZE
Titanium
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14071
Honda
Part Number Description
A TISPHO95 CBR1000RR ‘04-’07 Swingarm Pivot Inner Nut Right Side
B TISPHO82 CBR1000RR ‘04-’07 Rear Subframe Dome Head Bolt
M8 x 16mm
C TISPHO73 CBR1000RR/VTR1000 ‘04-’07 Swingarm Lock Nut
Left Side 36mm
D TISPHO74 CBR600F4/RR ‘99-’06 Airbox Bolt
E TISPHO40 CBR600RR 03-04 Subframe Dome Head Bolt M10 x
1.25mm x 40mm
F TISPHO71 CBR600RR ‘03-’06/VFR800 ‘02-’07 Swingarm Pivot Nut
Right Side
G TISPHO38 CBR600RR/1000RR ‘03’-’05 Rear Sprocket Stud
H TISPHO38-6 CBR600RR/1000RR ‘03’-’05 Rear Sprocket Studs - Set of 6
I TISPHO19 NC30/NC35 - Rear Sprocket Stud - Each
SP
EC
IAL
PA
RT
S
F
D
G
A
C
E
B
H
I
sales 0044 (0) 1684 851940 www.pro-bolt .com72
Kawasaki
Part Number Description
A TISPKAW01 Various - Footrest Hanger Bolt M8 x 30mm
B TIDISCYAM20 Various - Footrest Hanger Bolt M8 x 20mm
C TISPKAW05 Various -Footrest Hanger Bolt M10 x 30mm
Part Number Description
A TISPMV01 Front Axle Pinch Bolt - M10 x 32mm
B TISPMV06-2 Pair of Rear Hub Pinch Bolts M12 x 50mm set of 2
C TISPMV08 Side Stand Spring Bar
D TISPMV15 Front Caliper Pinch Bolt - M8 x 44mm
E TISPMV17 Frame Bolt with Shoulder - each
MV Agusta F4
A
C
D
A
C
E
B
SPECIAL PARTS
B
ALL AVAILABLE IN A CHOICE OF 4 COLOURS: BLUE • GOLD • NATURAL • PURPLE HAZE
Titanium
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14073
Suzuki
SP
EC
IAL
PA
RT
S
YamahaPart Number Description
A TISPYAM12 R6 1999-2002 Rear Brake
Caliper Slide Bolt
B TISPYAM14 R6 2003-2007/R12004-2008
Rear Caliper Slide Bolt
C TISPYAM21 R6 2005-2006/ R1 2004-2008
Front Brake Lever Pivot Bolt
D TISPYAM19 R1 2002-2003 Rear Caliper
Slide Bolt
E TISPYAM02 R1 Front Mudguard Bolt
M6 x 20mm
16mm Head Diameter
5mm Head Height
D
A
C
E
B
D
A
C
E
B
Part Number Description
A TISPSU08 GSXR Cam Cover Pinch/Retaining Bolt
B TISPSU24 Bandit 600/1200 Rear Torque Arm Bolt
C TISPSU42 Suzuki M16 x 1.50mm Oil Bung
D TISPSU46 GSXR600/750/1000 K6/K7 Rear Brake Caliper
Slide Bolt - each
E TISPSU52 GSXR Right Side Swing Arm Pivot Nut
Plastic Tubing/Spacers/CollarsPart Number Description
TUB5 M5 Spacer/Tubing
TUB6 M6 Spacer/Tubing
ANCILLARY ITEMS
sales uk 0044 (0) 1684 851940 www.pro-bolt .com74
Copper WashersPart Number Description
LWCOP10 M10 x 13.5mm O/d
Plastic WashersPart Number Description
LWAN4 M4 Fairing Plastic Washer
LWAN5 M5 Fairing Plastic Washer
LWAN6 M6 Fairing Plastic Washer
LWAN8 M8 Fairing Plastic Washer
LWACR6 M6 Countersunk Rubber Washer
LWACR8 M8 Countersunk Rubber Washer
LWASITEM Washer for Suzuki Cam Cover Bolt
Aluminium Threaded Collars/Spacers
Part Number Description
LCOLLAR5-7-3 5mm Threaded Collar - 7.5mm o/d - 3mm in Length
LCOLLAR5-7-5 5mm Threaded Collar - 7.5mm o/d - 5mm in Length
LCOLLAR5-7-10 5mm Threaded Collar - 7.5mm o/d - 10mm in Length
LCOLLAR6-8-3 6mm Threaded Collar - 8mm o/d - 3mm in Length
LCOLLAR6-8-5 6mm Threaded Collar - 8mm o/d - 5mm in Length
LCOLLAR6-8-10 6mm Threaded Collar - 8mm o/d - 10mm in Length
LCOLLAR6-10-6 6mm Threaded Collar -10.5mm o/d - 6mm in Length
LCOLLAR8-10-5 8mm Threaded Collar -10mm o/d - 5mm in Length
Steel WashersPart Number Description
LWASQR Steel 'Grippa' Washers for M6 Quick Release Studs
Allen KeysPart Number DescriptionAK1.5 1.5mm Allen KeyAK2 2mm Allen KeyAK2.5 2.5mm Allen keyAK3 3mm Allen KeyAK4 4mm Allen KeyAK5 5mm Allen KeyAK6 6mm Allen Key
Rubber Well NutsPart Number DescriptionLRNUT4F M4 (0.5mm - Fine Pitch) Ducati Rubber Nut LRN5 M5 Rubber Nut - 13mm LengthLRN6 M6 Rubber Nut - 15mm LengthLRN6-25 M6 Rubber Nut - 25mm LengthLRN8 M8 Rubber Nut - 28mm Length
Backing Plates & Receptacles
Part Number Description
CLIP2 M5 Chimney Nut / Slip On - 14mm width
CLIP5 M5 Chimney Nut / Slip On - 12mm width
CLIP1 M6 Chimney Nut / Slip On
CLIP4 M8 Chimney Nut / Slip On
CLIP6 Receptacle for Quick Release- Rivet On
CLIP3 Receptacle for Quick Release- Slide On
CLIP7 M5 Chimney Nut / Weld On
CLIP8 M6 Chimney Nut / Weld On
CLIP9 Race Fairing S Clip
CLIP-20 Race Fairing S Clip - Pack of 20
LWARQR Plastic Washer for Quick Release Stud
LWASQR Steel Grippa Washer for M6 Quick Release Stud
LRIVET3.2-6 Blind rivet 3.2mm diameter x 6mm length
Lockwire Part Number DescriptionLOCKWIRE 51 0.5mm DiameterLOCKWIRE 62 0.61mm Diameter
Supplied in 1 metre Lengths AN
CIL
LA
RY
ITE
MS
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14075
sales 0044 (0) 1684 851940 www.pro-bolt .com76
Won’t chip and peel like chrome! Our unique Flanged Hex Head Bolts are machined with an attractive convex dome to reflect the maximum light on a Hex Head Bolt. They are also designed with a captive washer for maximum effect. Polished to a mirror finish, supplied in any quantity, or packs of 5.
FLANGED HEAD BOLTS
ThreadDiameter
Pitch SocketSize
Max HeadDiameter
Lengths Available
1/4” 20TPI 1/4” 0.390” 5/8”, 3/4”, 7/8”, 1”, 1-3/16”, 1-1/4”, 1-3/8”, 1-1/2”, 1-3/4”, 2”, 2-1/4”, 2-1/2”, 2-3/4”, 4”, 4-3/4”
5/16” 18TPI 5/16” 0.490” 3/4”, 1”, 1-1/4”, 1-1/2”, 1-3/4”, 2”, 2-1/4”, 2-1/2”
3/8” 16TPI 3/8” 0.618” 3/4”, 1”, 1-1/4”, 1-1/2”, 1-3/4”, 2”, 2-1/2”
SPIKE HEAD BOLTS
New Spike Head design unique to Pro-Bolt! Machined to maximum length allowing for socket fitment and finished with a captive washer. Polished to a mirror finish, supplied in any quantity, or in packs of 5.
ThreadDiameter
Pitch SocketSize
Max HeadDiameter
Lengths Available
1/4” 20TPI 1/4” 0.390” 5/8”, 3/4”, 7/8”, 1”, 1-3/16”, 1-1/4”, 1-3/8”, 1-1/2”, 1-3/4”, 2”, 2-1/4”, 2-1/2”, 2-3/4”, 4”, 4-3/4”
5/16” 18TPI 5/16” 0.490” 3/4”, 1”, 1-1/4”, 1-1/2”, 1-3/4”, 2”, 2-1/4”, 2-1/2”
3/8” 16TPI 3/8” 0.618” 3/4”, 1”, 1-1/4”, 1-1/2”, 1-3/4”, 2”, 2-1/2”
UNC STAINLESS STEEL
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14077
DOME HEAD BOLTS
Our Dome Head Bolts are ideal for use on Derby/Clutch Cover or any bodywork. The attractive domed heads are manufactured with the smallest possible allen key drive for the most appealing cosmetic appearance. Polished to a mirror finish, supplied in any quantity, or in packs of 5.
ThreadDiameter
Pitch Allen Key Drive
Max HeadDiameter
Lengths Available
5/32” 32TPI 5/32” 5/16” 1/2”, 5/8”
1/4” 20TPI 1/4” 7/16” 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 2-1/2”
COUNTERSUNK BOLTS
Countersunk Bolts are measured in length including the head. We can supply countersunk washers separately which are designed to be used with this type of bolt. Ideal where a large diameter spread is required to prevent bolts pulling through bodywork etc and where a low head profile is essential. Polished to a mirror finish, supplied in any quantity or packs of 5.
ThreadDiameter
Pitch Allen Key Drive
Max HeadDiameter
Lengths Available
1/4” 20TPI 1/4” 1/2” 5/8”
FLAT WASHERS
Precision manufactured Flat Washers, polished to a mirror finish.
Size Outside Diameter Thickness
1/4” 5/8” 1/16”
1/4” 3/8” 1/16”
5/16” 11/16” 1/16”
ALL AVAILABLE IN POLISHED STAINLESS
UNC Stainless Steel
UN
C S
TAIN
LE
SS
ST
EE
L
sales 0044 (0) 1684 851940 www.pro-bolt .com78
Replace rusted, damaged and dull bolts with our high grade stainless steel versions. As with all our Stainless Steel, they are polished to a mirror finish so will complement our Engine Casing Bolt range.
IMPERIAL FASTENERS AND KITS SUITABLE FOR HARLEY-DAVIDSON® MODELS
SPECIAL PARTS SUITABLE FOR HARLEY-DAVIDSON® MODELS
100%
POLISHED
STAINLESS STEEL
Engine Covers
Engine Cover Boxed Sets
Transform the look of your bike with our Boxed Sets which enable you to replace lost, corroded or simply dull fasteners and achieve a superior look.
Fitment is easy - remove one bolt at a time, and replace with the identical length bolt from your Pro-Bolt kit, apply the Threadlock provided and torque to your manufacturers recommended setting.
Special Parts suitable for Harley-Davidson® Models
To continue the look, we supply a number of special parts which are generally universal across a wide range of models.
Stock Code Description Thread Diameter Threads Pitch Length Qty Per Pack
LSSDISCHDUNC210 Front Disc Bolt - Button Head 5/16" 18 tpi 7/8" 1
LSSDISCHDUNC312 Rear Disc Bolt - Button Head 3/8" 16 tpi 1" 1
SSHD46646-05 Front Disc Bolts - Set of 5 5/16" 18 tpi 7/8" 1 Pack = 5 Pieces
SSHD46647-05 Rear Disc Bolts - Set of 5 3/8" 16 tpi 1" 1 Pack = 5 Pieces
LSSSPHD02 Head Bolt - Individual Bolt 3/8" UNC Internal Thread 16 tpi 1 7/8" 1
LSSSPHD03 Head Bolt - Individual Bolt 3/8" UNC Internal Thread 16 tpi 3 1/6" 1
SSHDHEADBOLTHead Cover Bolt Kit (4 Long & 4 Short) 83-'06 Twin Cam/Big Twin and -('07-'10 1584) (TC88, TC96 and TC96B)
1 Pack = 8 Pieces
SSHD41843-08 Front Banjo Bolt Set 06 VRSC/'08 Touring 1 Pack = 7 Pieces
We offer bolt kits for specific models - just choose your look from either our unique Spike Head or Flanged Hex Head!
Kits are available for Primary Covers, Transmission Covers, Cam Covers, Lifter Block Covers, Rocker Box Covers and Gearcase/Front Sprocket Covers.
All our fasteners exceed D.O.D, M.O.T and factory standards.
10 20 30 40 50 60 70 80 90 100 110 120 130mm 14079
ALL AVAILABLE IN POLISHED STAINLESS
Stainless Steel
HA
RL
EY
-DA
VID
SO
N M
OD
EL
S®
Imperial Workshop Boxes
For large scale projects or just a convenient source of replacements, we supply workshop boxes comprising of the most widely used fasteners.
Exact contents are available on-line and can be amended if desired - with the agreement of Pro-Bolt.
Stock Code Description Qty
Per Pack
WSBOX155UNCHXSSStainless Steel UNC Workshop Box - Flanged Hex Head Bolts
155
WSBOX155UNCSKSSStainless Steel UNC Workshop Box - Spike Head Bolts
155
WSBOX200UNCMIXSSStainless Steel UNC Workshop Box - Flanged Hex Head and Spike Head Bolts
200
WSCAB500IMPSSStainless Steel UNC Workshop Cabinet - Flanged Hex Head Bolt, Spike Head Bolts and Washers
500
ALL AVAILABLE IN POLISHED STAINLESS
Imperial Workshop Boxes
For large scale projects or just a convenient source of replacements, we supply workshop boxes comprising of the most widely used fasteners.
sales 0044 (0) 1684 851940 www.pro-bolt .com80
WORLDWIDE DISTRIBUTORS
EuropeAustria Business Opportunity Available 0044 1684 851940 [email protected] Business Opportunity Available 0044 1684 851940 [email protected] Bike Design Belgium 0032 5245 3361 [email protected] Business Opportunity Available 0044 1684 851940 [email protected] J L Motorace Ltd 00357 22752234 [email protected] Republic Bikers Crown 00420 495 484 255 [email protected] Republic Prorace System 00420 608 346650 [email protected] Pro-Bolt Denmark 0045 33228070 [email protected] Business Opportunity Available 0044 1684 851940 [email protected] Sportbike Uskola Ltd 00358 41 546 2704 [email protected] Pro-Bolt France See website for details [email protected] Custom Chrome Europe 0049 671 888880 [email protected] Pro-Bolt Germany 0049 21193 85270 [email protected] Team Metisse GMBH 0049 5373 9240 780 [email protected] Moto Shop Grigorios Yiatilis 0030 210 921 4315 [email protected] X - Bikes 0036 1405 6653 [email protected] Business Opportunity Available 0044 1684 851940 [email protected] Faster96 srl 0039 0517 26849 [email protected] Business Opportunity Available 0044 1684 851940 [email protected] Business Opportunity Available 0044 1684 851940 [email protected] M A Motorcycle Centre 00356 491790 [email protected] Pro-Bolt Holland See website for details [email protected] Ten Kate Racing Products 0031 529488815 [email protected] Netherlands Zodiac International 0031 297 28 86 21 [email protected] PitStop Motorcyle Import 0047 91126731 [email protected] Bikerman AS 0047 51 53 83 73 [email protected] FN Sykkel (Cycle Parts) 0047 997 13 354 [email protected] Dyno-Tech 0048 608 655 130 [email protected] Sime Promotion (Cycle Parts) 0048 502498640 [email protected] Vincere Piotr Ulicki (Cycle Parts) 0048 500 014 768 [email protected] Probolt-Portugal See website for details [email protected] Business Opportunity Available 0044 1684 851940 [email protected] Business Opportunity Available 0044 1684 851940 [email protected] Business Opportunity Available 0044 1684 851940 [email protected] Business Opportunity Available 0044 1684 851940 [email protected] Totimport 0034 966 850 547 [email protected] Bikersneed Sweden 0046 707 135272 [email protected] Boove Aktiebolag 0046 8 7610266 [email protected] Pro-Bolt Switzerland 0041 793738087 [email protected] Suter Racing Technology 0041 523971060 [email protected] Business Opportunity Available 0044 1684 851940 [email protected] Business Opportunity Available 0044 1684 851940 [email protected]
North & South America & CanadaAmerica Pro-Bolt USA 1888 251 1644 [email protected] Tucker Rocky Distributing 001 817 258 9241 [email protected] Business Opportunity Available 0044 1684 851940 [email protected] Business Opportunity Available 0044 1684 851940 [email protected] Blue Streak Racing 001 519 878 9866 [email protected] Business Opportunity Available 0044 1684 851940 [email protected] Rico 2 Ruedas Distributor 001 787 735 4671 [email protected]
AfricaSouth Africa Pro-Bolt South Africa 0027 218 560 448 info@ pro-bolt.co.za
Australia & New ZealandAustralia Pro-Bolt Australia 0061 397925025 [email protected] Caledonia Zone Rouge Sarl 00687 779 177 [email protected] Zealand Prescott Engineering 0064 9 5797424 [email protected]
Middle/Far EastDubai Business Opportunity Available 0044 1684 851940 [email protected] Business Opportunity Available 0044 1684 851940 [email protected] Reshef-Tech 00972 8 8672621 [email protected] Pro-Bolt Japan 0081 566 62 8605 [email protected] Pacmax 0081 476 35 2680 [email protected]
South East AsiaIndonesia Business Opportunity Available 0044 1684 851940 [email protected] Business Opportunity Available 0044 1684 851940 [email protected] Biketech 21 0065 6392 1230 [email protected]
Thailand MPK Concept 0066 26115679 [email protected]
Pro-Bolt Worldwide
10 20 30 40 50 60 70 80 90 100 110 120 130mm 140
DISPLAY STANDS
PRO-BOLT WORLDWIDEPro-Bolt has global websites based in many countries around the world, offering local sales support and advice using local language and currency.
The list of countries is constantly growing – please see our main website www.pro-bolt.com for details.
We offer a variety of lightweight, pop-up display stands, developed to hold a range of stock options to suit most dealers. We would also be happy to customise a specific display.
For more details please email [email protected].
81
TITANIUM PARTS
sales 0044 (0) 1684 851940 www.pro-bolt .com82Pro-Bolt Ltd, Unit F, 6400 Severn Drive, Tewkesbury Business Park, Tewkesbury, Glos GL20 8SF. UK
Tel: 0044 (0)1684 851940 Fax: 0044 (0) 1684 850080 Email: [email protected] Online: www.pro-bolt.com
Australia www.probolt-australia.com
Denmark www.probolt.dk
France www.probolt-france.com
Germany www.probolt-germany.com
Holland www.probolt-holland.com
Japan www.probolt-japan.com
Portugal www.probolt-portugal.com
South Africa www.probolt.co.za
Switzerland www.pro-bolt.ch
United States www.probolt-usa.com
Visit our main website www.pro-bolt.com for latest information
We have websites in the following countries, where you will fi nd
local languages, local currency and local support:
PRO-BOLT WORLDWIDE2n
d E
dit
ion