Prismalence projects the light where it is needed. This is ... · Visual Indicating System Stella...

www.prismalence.nl Visual Indicating System

Prismalence projects the light where it is needed.

This is how you safe 50% to 80% in your costs!

Industrial outdoor lighting

STELLA POLARIS

Lower maintenance costs

50 – 80% energy savings

CO2 reduction - lower carbon footprint

Better visibility

Robust water resistant and dust-proof luminaire

Longer lifecycle

Suitable for marine environments

Safer working conditions

Better visibility = higher productivity

Innovative green technology from Sweden:

Cranes and machinery Industrial indoor lighting

SOLLJUS


Stella LED

Technical Specifications

Energy efficient, water and vibration proof LED fixture (IP66) for heavy

duty applications. Powder coated aluminum body and steel bracket.

Electronic ballast in separate water safe casing (IP66). Quick release

between fixture and ballast for fast maintenance. Built in lens protection.

Multiple rectangular light pictures via a patented prismatic lens system.

Extra low glare. The ballast is built with the Safety Extra Low Voltage

(SELV) for enhanced personal safety. LED circuit is protected against

open loop. 2 built dimming modes: 50% and 10-% output through phase

control. LED runs on 2 ballast for fail-safety. Also available with extra

Heavy Duty Bracket and safety chain.

Applications

Container cranes (STS, RMG), high masts, (harbor)cranes, shipyards

and –docks, (heavy) industry, marine environments and (rail) road

terminals.

Technical Data

Mains (input) voltage 220-240 VAC (110 VAC, 24VDC)

Total weight 12 kg fixture incl. of ballast in IP66 casing

Form of protection IP 66, class I

Temp. tolerance +50°C till -30°C

Color temperature 4,200K

Color rendering Ra >70

Lumen efficiency Approx. 100 Lumen/watt

LED life exp. 60,000 hours L80, TM21

Lamp type 120 or 230W LED individual chips

Energy consumption 122 or 232W

Operating position Universal

Start time Instant

Ballast Electronic ballast attached to body

Safety glass Included (prismatic lens)

Light dissemination Several rectangular light pictures depending

on use (15° to 140° dissemination).

Contact us for light calculations.

Order numbers:

SL12013, SL12069m, SL120692, SL120314 (120W)

SL23013, SL23069m, SL230692, SL230314 (230W)


Stella

560

418

378

130 ° 120 °

Area: 0,12m2


Energy efficient water and dust protected fixture (IP66) for use with

ceramic metal halogen gas discharge lamp. Powder coated aluminum

body and steel bracket. Tool-less change of light sources and optics.

Degree markings for precision focusing of the light beam. Electronic

ballast in separate water safe casing (IP66). Quick release between

fixture and ballast for fast maintenance. Membrane ventilators to

equalize pressure and for moisture control. Integrated anti glare ring

and lens protection. Rectangular light picture via a patented prismatic

lens system. Easy to rotate optics 90°. Vibration proof.

Use areas

Masts (24-50m), (harbor)cranes, workshops, shipyards and –docks,

(heavy) industry, marine environments, factory halls, (railroad)terminals

and arenas.

Technical Data

Mains (input) voltage 220-240 V

Total weight 9 kg fixture + 4 to 5 kg ballast in IP66 casing

Form of protection IP 66, class II


Color temperature 4200K (3000K optional with 150W)


Lumen efficiency 100 -115 Lumen/watt

LOR 0,8 – 0,9 depending on optics

Light-source life exp. 20,000 – 30,000 hours

Lamp type CDM-T 150W, 210W or 315W

Energy consumption 163W, 222W or 327W


Lamp seat G12 (150W) or PGZ18 (210W and 315W)

Start time Ca. 3 minutes to full lumen output

Ballast External electronic ballast

Lens Prismatic , antistatic and tempered safety glass

Reflector High quality anodized aluminum, parabolic



Please contact us for light calculations.

Artikelnummers:

S15013, S15069M, S150692, S150314 (150W)

S21013, S21069M, S210692, S210314 (210W)

S31513, S31569M, S315692, S315314 (315W)


Polaris


Energy-efficient water and dust protected fixture (IP66) for use with

ceramic metal halogen gas discharge lamp. Powder coated aluminum

body and bracket. Tool-less change of light sources and optics. Handles

for simple adjustment. Electronic ballast integrated in back

compartment. Membrane ventilators to equalize pressure and for

moisture control. Integrated anti-glare ring and lens protection.

Rectangular light picture via a patented prismatic lens system.

Easy to rotate optics 90°. Vibration proof.

Use areas

Masts (4-24m), (harbor)cranes, workshops, warehouses, mobile

equipment, perimeter lights, (railroad)terminals, heavy industry, marine

environments and architectural lighting.

Technical Data


Total weight 6 kg fixture



Color temperature 4200K (optional 3000K)


Lumen efficiency 90 Lumen/watt

LOR 0,8 - 0,9 depending on optics


Lamp type CDM-T/HCI-T/CMH 35W, 70W, 100W or 150W

Energy consumption 44W, 81W, 105W or 167W


Lamp seat G12

Start time 10 sec. to 50%; 1 minute to full lumen output

Ballast Internal electronic ballast

Lens Prismatic, antistatic and tempered safety glass





Article numbers:

P03513, P03536, P03569, P035411F, P035314F, P035315 (35W)

P07013, P07036, P07069, P070411F, P070314F, P070315 (70W)

P10013, P10036, P10069, P100411F, P100314F, P100315 (100W)

P15013, P15036, P15069, P150411F, P150314F, P150315 (150W)

318

253

130°

271

336

Area: 0,07m2


SOLLJUS 210-315W

SOLLJUS

The energy-saving and affordable alternative to 400W and 1000W HPI,

and SON luminaires. Often one-on-one exchange possible.

The optical unit (reflector and lens) is dustproof, therefore the luminaire

maintains its high efficiency throughout its entire lifetime.

Use areas

Spaces of 3m to 21m height, such as (factory)halls, warehouses,

distribution centres, storage spaces, workshops, cold stores, garages,

sport centres etc.

Technical Data

Mains (input) voltage 220-240V ~50/60Hz

Weight 7,7 kg

Measurement Height: 360mm; Ø 290mm

Form of protection IP65

Temp. tolerance +50°C t0 -30°C

Colour temperature 4,200K (optional 3,000K)

Colour rendering Ra >90

Lumen efficiency 115-120 Lumen/watt



Lamp type CDM-T MW Elite (Philips)


Installation 2x Ø 6mm screw

Lamp seat PGZ 18

Start time Ca. 3 min. until full lumen output

Ballast Electronic (Philips)

Lens Prismatic, dust proof and anti statc lens

(tempered glass)

Reflector Electrolytic galvanized steel; iron phosphated,

epoxy coated (parabolic)

Casing Stainless steel (EN 1.4301)

Press cast aluminium (lamp house)

Light dissemination 105°round (3m-7m height)

90° round (4m-10m height)


3° round (spot)

30x°120° (asymmetrical)


Article numbers:

065 210 (2)4-00 (210W)

065 315 (2)4-00 (315W)

Complies with the European norm EN12464-1; CE-, EMC- and

S-approved. D-certified.


SOLLJUS 35-70-100-150W

SOLLJUS

The energy-saving and affordable alternative to 250W and 400W HPI,

HPL and SON luminaires. Often one-on-one exchange possible.

The optical unit (reflector and lens) is dustproof, therefore the luminaire

maintains its high efficiency throughout its entire lifetime.

Use areas

Spaces of 3m to 21m height, such as (factory)halls, warehouses,

distribution centres, storage spaces, workshops, cold stores, garages,

sport centres etc.

Technical Data

Mains (input) voltage 220-240V ~50/60Hz

Weight 3,7 – 3,9 kg

Measurements Height: 360mm; Ø 290mm

Form of protection IP23 and IP65

Temp. tolerance +50°C to -30°C

Colour temperature 4,200K (optional 3,000K)

Colour rendering Ra >90



Light-source life exp. 15,000 hours (Osram)

Lamp type HCI-T (Osram)


Installation 2x Ø 6mm screw

Lamp seat G12

Start time Ca. 3 min. until full lumen output

Ballast Electronic (Osram)

Lens Prismatic, dust proof and anti static lens

(tempered glass)

Reflector Electrolytic galvanized steel; iron phosphated,

epoxy coated (parabolic)

Casing Stainless steel (EN 1.4301)

Press cast aluminium (lamp house)

Light dissemination 105°round (3m-7m height)



3° round (spot)

30x°120° (asymmetrical)


Article numbers:

023/065 035 (2)4-00 (35W)

023/065 070 (2)4-00 (70W)

023/065 100 (2)4-00 (100W)

023/065 150 (2)4-00 (150W)

Complies with the European norm EN12464-1; CE-, EMC- and

S-approved. D-certified.


Polaris LED


Water and dust protected fixture (IP66) for use with LED. Powder

coated aluminum body and bracket. Tool-less change of light sources

and optics. Handles for simple adjustment. Electronic ballast integrated

in back compartment. Quick release between fixture and mains for fast

maintenance. Membrane ventilators to remove moisture and equalize

pressure. Integrated anti glare ring and lens protection. Rectangular light

picture via a patented prismatic lens system. Modular optical and light-

engine (LED) unit with quick release.

Use areas

Masts (4-24m), (harbor) cranes, workshops, warehouses, mobile

equipment, perimeter lights, stables, railroad terminals, heavy industry,

salty marine environments, greenhouses, zoo and architectural lighting.

Suitable to use for emergency lights together with Central Battery

Systems (CBS) since it can run on DC (as well as AC).

Technical Data

Mains (input) voltage 220-240 VAC or DC

Total weight 7 kg

Form of protection IP 66, class I; D-class, S-class, CE-mark


Color temperature 3000K or 4000K

Color rendering Ra 75-80+



Lamp type LED 38W


Energy consumption 38W

Start time 1 sec. to full lumen output


Safety glass Prismatic lens, antistatic





Article numbers:

PL03813, PL03836, PL03869, PL038411, PL038314, PL038315

318

253

130°

271

336

Area: 0,07m2


Mamba LED

Technical specification:

LED-luminaire with patented lens optics. Powder coated aluminum

body. Tool less replacement of ballast for easy service and fitting.

Membrane ventilation. Adjustable bracket for mounting on both

straight posts and arms. Mounting for 60 mm tubes (use insert for 40

mm tube). Rectangular beam via prismatic lens system that also

minimizes glare and light pollution. Meets all street regulations.

Applications:

Road lighting, pedestrian lighting, small and medium motorways,

perimeter lighting, car parks and jogging tracks. Suitable for mounting

on poles 4-10 m tall. Post separation 20m – 60m depending on road

requirements.

.

Technical Data

Mains (input) voltage 220-240 VAC

Total weight 5,2 kg



Color temperature 4200K

Color rendering Ra 75

Lumen efficiency 105 lumen/Watt

LOR >0.7

Light-source life exp. >50.000 hours.

Life exp. ballast >80.000 hours

Lamp type 36W or 50W LED

Energy consumption 40W, 57W


Start time Instant


Safety glass Included (prismatic lens).

Light dissemination Rectangular output 30°x140°; 35°x155°


Order nummers:

M036314, M036315 (36W)

M050314, M050315 (50W)

www.prismalence.nl

Cobra

Visual Indicating System


Energy-efficient streetlight fixture (IP66) for ceramic metal halogen

gas discharge lamp. Powder coated aluminum body. Tool-less and

quick maintenance. Membrane ventilators to equalize pressure and

for moisture control. Freely adjustable pole mount for 60mm and

40mm poles (top Ø). Use of patented lens system gives choice of 3

rectangular light patterns to cover different distances between poles:

short, standard and long (up to double standard).

Use areas

Can be used for all streetlight applications by combination of different

lenses and wattages. 35W is suitable 4-8m poles, 70W for 8-10m

poles and 100W for 10-12m poles. Will replace 125W-250W Mercury

Vapor and 70W-250W High Pressure Sodium.

Suitable for all climates including corrosive environments such as

sea-side roads and locations.

Technical Data


Total weight 6,5 kg


Temp. tolerance +50°C to -30°C




LOR 0,7 – 0,9 depending on optics


Lamp type CDM-T/HCI-T/CMH 35W, 70W or 100W

Energy consumption 44W, 82W or 109W


Lamp seat G12

Start time Ca. 3 minutes to full lumen output


Lens Prismatic, antistatic and tempered safety glass





Article numbers:

C03569, C035314F, C035315 (35W)

C07069, C070314F, C070315 (70W)

C10069, C100314F, C100315 (100W)

www.prismalence.nl

Arkitekt

Visual Indication System

1335

700


Energy-efficient water protected park fixture (IP65) for use with

ceramic metal halogen gas discharge lamp. Powder coated

aluminum body and steel bracket.

Tool-less change of light sources and optics.

Even light spread through multifaceted secondary reflector for

indirect lighting. Sold including cable.

Areas of use

Parks and pedestrian areas, entrance lights, parking areas.

For use with 60mm (top Ø) poles of 3-4.5m height.

Suitable distances are 15-25m.

Technical data


Total weight 13,5 kg





Lumen output 90-100 Lumen/watt


Lamp type CDM-T/HCI-T/CMH 35W or 70W

Energy consumption 44W or 82W

Operating position Standing 90°

Lamp seat G12

Start time Ca. 3 min. to full lumen output


Reflector High quality anodized aluminum,

parabolic

Light dissemination 360°


Article numbers:

A035360 (35W)

A070360 (70W)

Prismalence projects the light where it is needed. This is ... · Visual Indicating System Stella...

Documents

Transcript of Prismalence projects the light where it is needed. This is ... · Visual Indicating System Stella...