Printed for - CONACO market according to the NORSOK M 650 rev 4 Our internal laboratory, equipped...

24
Printed for

Transcript of Printed for - CONACO market according to the NORSOK M 650 rev 4 Our internal laboratory, equipped...

Page 1: Printed for - CONACO market according to the NORSOK M 650 rev 4 Our internal laboratory, equipped with modern technology, performs final inspection tests according to the national

Printed for

Page 2: Printed for - CONACO market according to the NORSOK M 650 rev 4 Our internal laboratory, equipped with modern technology, performs final inspection tests according to the national

-2-

Inoxfucine was founded in 1963 by Pietro Pugassi together with

Gianfranco Guindani. Since the very beginning Inoxfucine has been

engaged in the development of special metal alloys for petrochemical, oil

and gas, pharmaceutical and food plants. Through the years the company

has always followed closely all development and integration of new metal

alloys; the company is equipped with technologically advanced

equipments for the open die forging of STAINLESS STEEL including DUPLEX

AND SUPERDUPLEX, ALLOYS, NICKEL ALLOYS AND CARBON STEEL.

Through constant investments in new equipments, rebuilds and upgrades,

Inoxfucine offers the most comprehensive, advanced capabilities and

services for forgings in the following markets all over the world: Chemical,

Petrochemical / Oil and Gas, Automotive, Energy, Aeronautics and

Aerospace, Food, Pharmaceutical, Shipbuilding, Military .Our strength is to

be a team of people with an high flexibility, a tailor-made attention to the

customer needs and to have a well-known experience in terms of special

alloys and most demanding requirements, together with the capability of

working every day with the same enthusiasm and passion shown by the

Pugassi family since the beginning.

Page 3: Printed for - CONACO market according to the NORSOK M 650 rev 4 Our internal laboratory, equipped with modern technology, performs final inspection tests according to the national

-3-

Index

Products pag 4-14

Materials pag 15-16

Equipments pag 17

Contacts pag 23

Heat Treatment pag 18

Quality-Laboratory pag 19-20

Conaco Strainers pag 21-22

Page 4: Printed for - CONACO market according to the NORSOK M 650 rev 4 Our internal laboratory, equipped with modern technology, performs final inspection tests according to the national

-4-

Rings and pipes

MAX OD (A) 2.000 mm

MAX THK(C) 650 mm

MAX WEIGHT 4 tons

Page 5: Printed for - CONACO market according to the NORSOK M 650 rev 4 Our internal laboratory, equipped with modern technology, performs final inspection tests according to the national

-5-

Rings and pipes

Page 6: Printed for - CONACO market according to the NORSOK M 650 rev 4 Our internal laboratory, equipped with modern technology, performs final inspection tests according to the national

-6-

Flat bars

MAX WEIGHT 4,5 tons

Page 7: Printed for - CONACO market according to the NORSOK M 650 rev 4 Our internal laboratory, equipped with modern technology, performs final inspection tests according to the national

-7-

Flanges

Welding Neck

Long Welding Neck

Blind

Slip On

Socket Welding

Special Flanges

Lap Joint

Threaded Flanges

Page 8: Printed for - CONACO market according to the NORSOK M 650 rev 4 Our internal laboratory, equipped with modern technology, performs final inspection tests according to the national

-8-

Flanges

Page 9: Printed for - CONACO market according to the NORSOK M 650 rev 4 Our internal laboratory, equipped with modern technology, performs final inspection tests according to the national

-9-

MAX 24’’

Balls

Page 10: Printed for - CONACO market according to the NORSOK M 650 rev 4 Our internal laboratory, equipped with modern technology, performs final inspection tests according to the national

-10-

Balls

Page 11: Printed for - CONACO market according to the NORSOK M 650 rev 4 Our internal laboratory, equipped with modern technology, performs final inspection tests according to the national

-11-

Bars

MAX WEIGHT 6 tons

Page 12: Printed for - CONACO market according to the NORSOK M 650 rev 4 Our internal laboratory, equipped with modern technology, performs final inspection tests according to the national

-12-

Discs

MAX OD (A) 1.500 mm

MAX THK (B) 400 mm

Page 13: Printed for - CONACO market according to the NORSOK M 650 rev 4 Our internal laboratory, equipped with modern technology, performs final inspection tests according to the national

-13-

Inoxfucine could also realize special forgings according customer’s drawings

Special Pieces

Page 14: Printed for - CONACO market according to the NORSOK M 650 rev 4 Our internal laboratory, equipped with modern technology, performs final inspection tests according to the national

-14-

Special Pieces

Page 15: Printed for - CONACO market according to the NORSOK M 650 rev 4 Our internal laboratory, equipped with modern technology, performs final inspection tests according to the national

-15-

Materials

Duplex and Superduplex

F 51, F 53, F 55

Austenitic Stainless Steels

F 304, 304L 304H, F 316, 316L, 316H, 316 LN, 316 Ti, WM5, 316 L Urea Grade, F321, 321H, F 347, 347H, XM19, F 44, F 310 MoLn

Ferritic and Martensitic Stainless Steels

410 A/B, 420, 431, 430, F 6 NM, F 91, 17-4 PH

Carbon and Low Alloy Steels

A 105, LF2, A 765, F1, F 5, F11, F12, F 22

Nickel / Nickel Alloys

N04400, N06600, N06625, N08020, N08800, N08810, N08811, N08825, N10276, N06022, N08904, N07718, N07750, N05500, N06059

Titanium Alloys

B 381 F1, F2, F3, F5, F7, F12

Page 16: Printed for - CONACO market according to the NORSOK M 650 rev 4 Our internal laboratory, equipped with modern technology, performs final inspection tests according to the national

-16-

ASME AISI GOST

CSN DIN EN

SIS UNI EN

Most common certifications used

Materials

ASTM UNS SAE

AMS

VD TUV

BRITISH ST

AF NOR EN

STOOMWEZEN

Page 17: Printed for - CONACO market according to the NORSOK M 650 rev 4 Our internal laboratory, equipped with modern technology, performs final inspection tests according to the national

-17-

Equipments

Inoxfucine’s Equipments include:

5 PRESSES with capacity between 500 tons and 1500 tons

5 ROUND ROLLING MILLS for RINGS (OD max 2.000 mm, H 900

mm, weight max 3000 kg), 1 rolling machine for SHAPED PIECES

1 COMPRESSED AIR HAMMER (2.000 kg)

7 FORGING FURNACES (2000 kw max)

7 HEAT TREATMENT FURNACES (3 electric, 4 gas)

13 CUTTING MACHINES (until 1000 mm OD)

LIFT TRUCKS equipped with bit pincers in order to load and

download the furnaces

FORKLIFTS for warehouse

WATER TREATMENT TANKS

WELDING/TIG MACHINES

LATHES

Page 18: Printed for - CONACO market according to the NORSOK M 650 rev 4 Our internal laboratory, equipped with modern technology, performs final inspection tests according to the national

-18-

Heat Treatment

Inoxfucine has furnaces and water tanks of various sizes and

capabilities to cover all the requirements of a proper heat

treatment. Following heat treatments are regularly performed

inside our plants:

- Annealing

- Normalizing

- Normalizing + Tempering

- Quenching and Tempering

- Solution annealing

- Solution Annealing + Age hardening

- Stabilizing

- P.W.H.T simulated

Page 19: Printed for - CONACO market according to the NORSOK M 650 rev 4 Our internal laboratory, equipped with modern technology, performs final inspection tests according to the national

-19-

Quality and Laboratory

For Inoxfucine the high quality of the products and services are

the compulsory criteria to compete.

The large number of certifications supplied, together with the

stringent audits performed every day are a continuous tests to

measure quality and performance of our Company.

International approvals by independent certification associations

have made possible for our company to produce and supply

forgings all around the world.

Moreover we are an approved manufacturer for the Northern

European market according to the NORSOK M 650 rev 4

Our internal laboratory, equipped with modern technology,

performs final inspection tests according to the national and

international standards, under the supervision of the major

working inspection agencies such as ABS, BUREAU VERITAS,

DNV, GL, LLOYD’S REGISTER, RINA, TUV

Page 20: Printed for - CONACO market according to the NORSOK M 650 rev 4 Our internal laboratory, equipped with modern technology, performs final inspection tests according to the national

-20-

Quality and Laboratory

NON DESTRUCTIVE TESTS:

Technicians with SNT-TC1-1A LEVEL 2 and EN 473-03

qualifications execute the non-destructive tests, as follows

- UT - Liquid Penetrant test - Magnetic particle test - Quantometric test - PMI - Check analysis - Visual and dimensional test

EQUIPMENT FOR MECHANICAL TESTS:

- 2 Tensile testing machines - 2 Impact testing machines - 3 Durometers 3000/10 - 1 Instruments to read Brinell values - 1 Furnace for Hot Tensile test

Conaco Strainers

Page 21: Printed for - CONACO market according to the NORSOK M 650 rev 4 Our internal laboratory, equipped with modern technology, performs final inspection tests according to the national

-21-

Conaco Strainers

Conaco Strainers

Page 22: Printed for - CONACO market according to the NORSOK M 650 rev 4 Our internal laboratory, equipped with modern technology, performs final inspection tests according to the national

-22-

Conaco Strainers

Page 23: Printed for - CONACO market according to the NORSOK M 650 rev 4 Our internal laboratory, equipped with modern technology, performs final inspection tests according to the national

-23-

Contacts

www.inoxfucine.it

[email protected]

ACCOUNTING dpt: ext 615 CUSTOMER CARE: ext 638-647

SALES dpt: ext 618-619 CERTIFICATION: ext 613-630

PRODUCTION dpt: ext 627 SHIPPING dpt: ext 640

Page 24: Printed for - CONACO market according to the NORSOK M 650 rev 4 Our internal laboratory, equipped with modern technology, performs final inspection tests according to the national

-24-

International Certified Quality Standards