print this page email this page to a ... - Borden Lighting · ECO INFO METALS: Aluminum and brass...

2
ECO INFO METALS: Aluminum and brass with the highest available recycled content for lower embodied energy. Both metals are valuable and recyclable at the end of the product’s useful life. For more information see “SPEC GUIDE.” FINISHING: Aluminum & Antique Brass are sealed with a hand-applied bees wax. No paint or lacquer is used in order to avoid pollution associated with manufacture and application of these substances. Satin Brass are clear-coated with a very low VOC water-based coating. Paint finishes are low VOC and oven cured. ENERGY: Designed exclusively for compact fluorescent lamps using HPF electronic ballasts or LEDs. FABRIC SHADE: Available with sustainability produced fabrics that are backed with a US made paper backing, that replaces the standard styrene backing. See OPTIONAL FABRICS on Pg. 2. MATERIALS Solid brass, bronze or aluminum metal work, hand finished. White acrylic bottom lens. FINISHES SAL SB Other metal finishes available. Call factory. LAMPING 303-18: LED A-LAMPS: 3-GU24 base LED A-lamps, 11w, 1100lm. LED ARRAYS & DRIVERS: 2-arrays, 18w and 2600 lm total. 303-24/36/42:LED A-LAMPS: 4-GU24 base LED A-lamps, 11w, 1100lm, total 44W and 4400lm. LED ARRAYS & DRIVERS: Downlight: 4-arrays, rated at 36W and 5200lm total, or 4-arrays, rated at 44W and 6800lm total, or 4-arrays, rated at 64W and 9600lm total. Uplight: Same arrays available as uplight in addition to downlight. LEDs and LED A-lamps are 3000k, 80+CRI NOTE: CF lamping is available. Call Factory. DRIVERS LED A-LAMPS: Electronic driver is built into the lamp, 120V only. Dimmable to 10% with most incandescent dimmers. LED ARRAYS: Integral drivers are 120/277 and 0-10V dimmable. Satin Aluminum Satin Brass 460 Roland Way • Oakland, CA 94621 • ph 510.357.0171 • fax 510.357.3832 • www.bordenlighting.com 303-18 303-24 303-36 303-42 FABRIC SHADE DRUM FEATURES Classic drum shape available with a variety of fabric shades. Companion ceiling and wall mounts. Optional integral emergency battery pack. Available in 18”, 24”, 36” & 42” diameters. COMPANIONS 103 Shown with cream linen shade and satin aluminum. 503 email this page to a colleague installation instructions print this page interactive submittal drawing UPDATED 6/17 AB Antique Brass CCP Custom Color Painted finish D LE M E D LE M E M E D LE D LE

Transcript of print this page email this page to a ... - Borden Lighting · ECO INFO METALS: Aluminum and brass...

ECO INFO METALS: Aluminum and brass with the highest available recycled content for lower embodied energy. Both metals are valuable and recyclable at the end of the product’s useful life. For more information see “SPEC GUIDE.”

FINISHING: Aluminum & Antique Brass are sealed with a hand-applied bees wax. No paint or lacquer is used in order to avoid pollution associated with manufacture and application of these substances. Satin Brass are clear-coated with a very low VOC water-based coating. Paint finishes are low VOC and oven cured.

ENERGY: Designed exclusively for compact fluorescent lamps using HPF electronic ballasts or LEDs.

FABRIC SHADE: Available with sustainability produced fabrics that are backed with a US made paper backing, that replaces the standard styrene backing. See OPTIONAL FABRICS on Pg. 2.

MATERIALS • Solid brass, bronze or aluminum metal work, hand finished. • White acrylic bottom lens.

FINISHES

SAL SB

Other metal finishes available. Call factory.

LAMPING 303-18: LED A-LAMPS: 3-GU24 base LED A-lamps, 11w, 1100lm. LED ARRAYS & DRIVERS: 2-arrays, 18w and 2600 lm total.303-24/36/42:LED A-LAMPS: 4-GU24 base LED A-lamps, 11w, 1100lm, total 44W and 4400lm. LED ARRAYS & DRIVERS: Downlight: 4-arrays, rated at 36W and 5200lm total, or 4-arrays, rated at 44W and 6800lm total, or 4-arrays, rated at 64W and 9600lm total. Uplight: Same arrays available as uplight in addition to downlight. LEDs and LED A-lamps are 3000k, 80+CRINOTE: CF lamping is available. Call Factory.

DRIVERSLED A-LAMPS: Electronic driver is built into the lamp, 120V only. Dimmable to 10% with most incandescent dimmers.LED ARRAYS: Integral drivers are 120/277 and 0-10V dimmable.

Satin AluminumSatin Brass

460 Roland Way • Oakland, CA 94621 • ph 510.357.0171 • fax 510.357.3832 • www.bordenlighting.com

303-18303-24303-36303-42FABRIC SHADE DRUM

FEATURES• Classic drum shape available with a variety of fabric shades.• Companion ceiling and wall mounts.• Optional integral emergency battery pack.• Available in 18”, 24”, 36” & 42” diameters.

COMPANIONS

103Shown with cream linen shade and satin aluminum.

503

email this page to a colleague

installation instructions

print this page

interactive submittal drawing

U P D AT E D 6 / 1 7

AB Antique BrassCCP Custom Color Painted finish

DL E ME

DL EME

ME

DL E

DL E

303-18303-24303-36303-42

460 Roland Way • Oakland, CA 94621 • ph 510.357.0171 • fax 510.357.3832 • www.bordenlighting.com

MOUNTING: Standard J-box or plaster ring. Safety cable provided.

CAT# LAMPING VOLT FINISH OPTION- - - -SPEC GUIDE

q 303 q LED3/11 (18”)q LED3/11 (24”)q LED3/11 (36”) q LED4/11 (42”) q LED/18 DNq LED/36 DNq LED/44 DN q LED/64 DNq LED/36 UPq LED/44 UP

q 120 q 277

q SAL q SBq ABq CCP

q IEMq TCq VAN (Vanilla)q WHT (White)q OAT (Oatmeal)q OAT (Oatmeal)q DOV (Dove Polyester)

SAMPLE SPEC: 303-24-LED18DN + LED/44UP-277-SAL-24”OA

- SIZEq 18q 24q 36q 42

HANG HEIGHT: Standard overall hang height is 24” (ceilingto bottom of fixture). There is an additional charge for hangheights greater than standard. Minimum recommended is 18.”Standard canopy will accommodate sloped ceiling up to40 degrees.

OPTIONS DIMMING: LED A-LAMPS are triac dimmable. LED arrays are 0-10v dimmable. EMERGENCY BATTERY PACK: Integral EBP available, specify IEM, except for 303-18.

FABRIC SHADE: Standard, or default, shade is Cream Linen. Shade fabrics are shown above. Call factory for other fabrics.

TOP COVER: Optional top cover (TC). Specify white or clear acrylic.

VAN Vanilla WHT White OAT Oatmeal

STANDARD FABRICCream Linen (CRE)

PREMIUM FABRICS: Imported 100% flax linen.

DOVDove PolyesterWashable & 65% recycled content

PREMIUM ECO-FABRICS:

ClickHEREto learn moreabout shade fabrics

NOTE: All fabrics shown greater than actual size.

VARIATIONS / MODIFICATIONS• Special finishes• Special shade fabrics• Addition of decorative detail

NOTE: Standard electronic ballast is multi-volt and multi-wattage. Fixture will accommodate 26, 32 or 42watt lamps.

pendants

ceiling

int wall

ext wall

PHOTOMETRICS Lighting Sciences Report No. 29245

Fixture efficiency 82.3%65% uplight & 35% downlight

304

303

SCALED REFERENCE

UL & IBEW LABELED DRY DAMP WET

TYPE

Information appearing hereon is proprietary and confidential and may not be used without the permission of Borden Lighting.

RBMY

PROJECT

999 Montague StreetSan Leandro, CA 94577510-357-0171 Fax 510-357-3832www.bordenlighting.com 303 & 304

CKDDWN

SPEC NO

DATE

SCALE

PROJECT SPEC

SPECIFIER

1/4" = 1' - 0"

IBEW LabelledC

Our fixtures are handcraftedhere in the USA using thehighest quality materials.

q LED/64 UP