Print All1

ADM100 Questionnaire

1) What is SAP Instance? (Single Choice)a. Group of Database that make a system runnableb. Group of SAP instances that make a system runnablec. Group of Services that make a system runnabled. Group of O/S level Files that make a system runnable

2) What is the name of the DEFAULT Profile in SAP System? (Single Choice)a. DEFAULT.impb. DEFAULT.profc. DEFAULT.pfld. DEFAULT.ini

3) Spool Request is created by which Work Process? (Single Choice)a. Spool Work Processb. Dispatcherc. Message Serverd. Dialog Work Process

4) What is the Profile Parameter name used to set the Trace Level in SAP system? (Single Choice)a. rdisp/trace_levelb. rdisp/tracelevelc. rdisp/LEVELd. rdisp/TRACE

5) The Standard SAP User SAP* has the following password (Single Choice)a. 06071992b. 19920706c. 07061992d. 19920607

6) What is the order in which the Profile files are read during the system start? (Single Choice)a. DEFAULT, INSTANCE & STARTb. INSTANCE, DEFAULT & STARTc. START, INSTANCE, DEFAULTd. START, DEFAULT, INSTANCE

7) Transaction Code used for Profile Maintenance / Job overview is: (Single Choice)a. PFCG / SM37b. RZ11 / SM36c. RZ10 / SM37d. RZ03 / SM37

8) What will happen if a background job is running and the Operation Mode Switch is activated in between? (Single Choice)

a. The job will be cancelledb. The job will be put in Suspended statec. The Job will continue to run and once it finishes then the Operation Mode Switch will occurd. The Operation Mode will happen the next day

9) State whether the followings statements are True or False:a. W Gate should always be on Web Serverb. A Gate should always be coupled with W Gatec. SAP System should be installed on NT Operating Systemd. Dual Host Installation in ITS means A Gate and W Gate are on the same host

10) From SAP System which process is used to start External Command / Program (Single Choice)a. sapxpgb. sapevtc. disp+work.exed. gwrd

11) ‘Event-Based Job Scheduler’ runs on every instance (True / False)12) Printer Name in SAP is not case sensitive (True / False)13) SAP System has a Operation Mode configured. There are performance issues in the System and finally

the BASIS administrator adds RAM (Physical Memory) to the Server. He configures few parameters and increases the no. of work processes. The BASIS administrator needs to redefine Operation Mode to take effect of the new processes –(True/False)

14) The standard System Landscape recommended by SAP is: (Single Choice)a. DEV, QAS & PRD systems on one Server

b. DEV & QAS on one server and PRD on another serverc. DEV, QAS & PRD on separate serverd. DEV on one server and QAS & PRD on one server

15) Access Method is: (Single Choice)a. Connection between Dialog & Spool Work Processb. Connection between OS Spool and the Actual Printerc. Connection between Spool Work Process and OS Spoold. Connection between Spool Request & Output Request

16) Locking Process of SAP Transactions is carried out by: (Single Choice)a. Enqueue b. Dialogc. Spoold. Background

17) Spool Data is stored in which table: (Single Choice)a. TSP01b. TSP03c. TST03d. TSP02

18) From External Program which process is used to trigger an event in SAP System? (Single Choice)a. sapxpgb. sapevtc. disp+work.exed. icmon

19) In 3 system landscape from where the request can be imported in QAS system (Single Choice)a. Only from DEVb. Only from QASc. Only from PRDd. From all three systems

20) State whether the following statements are True/False in case of Note Assistant: (Multiple Choice)a. No SPDD modification adjustment required during upgrade / when importing Support Packagesb. SSCR request is requiredc. Changes are noted in Modification Assistant (SE95)d. Changes are done through SNOTES transaction

21) While importing Support Packages you need to do the following. State True/False:a. Update SPAM/SAINT update with latest versionb. Client 000 is not to be used for importingc. Import must always be performed during peak operationsd. Aborted packages must be kept untouched

22) Uses of Solution Manager (Multiple Choice)a. Operations Portalb. Solution Monitoringc. Support Portald. Transaction Creation Portal

23) CCMS Monitoring Infrastructure consists of: (Single Choice)a. Data Migrationb. Data Collectionc. Data Storaged. Data Archiving

24) The following are the components of a DB: (Multiple Choice)a. Database Bufferb. Data Filesc. SAP Kerneld. Special DB Processes

25) ICM (Internet Communication Manager) is a Process (True/False)


26) What is SAP Instance? (Single Choice)a. Group of Database that make a system runnableb. Group of SAP instances that make a system runnable

c. Group of Services that make a system runnabled. Group of O/S level Files that make a system runnable


28) Spool Request is created by which Work Process? (Single Choice)a. Spool Work Processb. Dispatcherc. Message Serverd. Dialog Work Process

29) What is the Profile Parameter name used to set the Trace Level in SAP system? (Single Choice)a. rdisp/trace_levelb. rdisp/tracelevelc. rdisp/LEVELd. rdisp/TRACE










39) The standard System Landscape recommended by SAP is: (Single Choice)a. DEV, QAS & PRD systems on one Serverb. DEV & QAS on one server and PRD on another serverc. DEV, QAS & PRD on separate serverd. DEV on one server and QAS & PRD on one server

40) Access Method is: (Single Choice)a. Connection between Dialog & Spool Work Process

b. Connection between OS Spool and the Actual Printerc. Connection between Spool Work Process and OS Spoold. Connection between Spool Request & Output Request


42) Spool Data is stored in which table: (Single Choice)a. TSP01b. TSP03c. TST03d. TSP02










51) Software Logistics provide: (Single Choice)a. Procedure for Central User Administrationb. Procedure for Development / Customizingc. Procedure for Post Installation Stepsd. Process to help you monitor your system externally

52) The administrator wants to deactivate the import of all the requests in an import queue for a SAP System, he should set which parameter? (Single Choice)

a. IMPORT_ALL_NO

b. IMPORT_ALL_STOPc. NO_ALL_IMPORTd. NO_IMPORT_ALL

53) The area of CTS that schedules and monitors the importing of Change Request is: (Single Choice)a. Workbench Organizerb. Transport Organizerc. TMSd. CTS

54) The transaction used for Cross-System Viewer and Client Transport – Export Processing is: (Single Choice)

a. SUC0/SCC7b. SCU0/SCC7c. SUC0/SCC8d. SCU0/SCC8

55) Types of Client Specific Data? (Multiple Choice)a. Dictionary Datab. User Datac. Master Datad. Transaction Data

56) Select the correct statements pertaining to TMS configuration (Multiple Choice)a. Several transport groups can be in a transport domainb. Transports can take place in the different transport groupsc. Transport layer is not required while defining transport routesd. Only one transport layer can be defined in the system at any given time

57) Which of the following are the Transport directories? (Multiple Choice)a. binb. actlogsc. profiled. tmpe. log

58) List the Transport Requests that are generated during Client Export and the description of each request giving the type of data exported

Sr. No. Request Name Description

59) Transaction Code used for Transport Management System / Transport Organizer is: (Multiple Choice)a. STMS / SE09b. SMTS / SE10c. STMS / SE10d. STSM / SE01

60) Which of the following is NOT a profile that can be used for client copies? (Multiple Choice)a. SAP_USER – User master recordsb. SAP_ACUST – Application & Customizing datac. SAP_EXBC – Client dependent/independent Customizing & Usersd. SAP_MAST – Master data only

61) You can get Support Packages from the following places (Multiple Choice)a. SAP Service Marketplaceb. SAPNet-R/3 Frontendc. Online Documentation CDd. HelpSAP.com

e. Collection CDs

62) Why did SAP introduced CRTs?______________________________________________________________________________________________________________________________________________________________________________________________________________________________

63) BW Support Package for Release 30B will be named according to which format? (Single Choice)a. SAPBW30B<serial no.>b. SAPKY30B<serial no.>c. SAPKW30B<serial no.>d. SAPKB30B<serial no.>

64) Which tool is used for carrying out R/3 Upgrade (Single Choice)a. PREPAREb. SPAUc. R3UPd. SPDD

65) List the differences between Local Client Copy & Remote Client Copy

Sr. No. Local Client Copy Remote Client Copy1234

66) The logs generated by ‘tp’ tool are: (Multiple Choice)a. tp system logb. Transport Step Monitorc. ULOGd. <Source SID><Import Step><6 digit>.<Target SID>

67) Which of the following statements are correct in regard to preliminary imports? (Multiple Choice)a. SAP recommends using preliminary imports rather than imports of the entire queueb. Preliminary imports should only be performed in exceptional casesc. Change request imported as preliminary imports remain in the queue and are imported again

when an import of the entire queue is performedd. Change request are deleted from the import queue after a preliminary import is performed

68) Parallel Processing in case of Client Copy is: (Single Choice)a. Performed in Local Client Copyb. Performed in Client Transportc. Performed when you want to do other client copy in paralleld. Not recommended by SAP

69) Explain the meaning of Consolidation Route & Delivery Route (Not more than 30 words)________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

70) Which are the two most frequently used Change Request Types available in Transport Organizer? Give a short description of each one

__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

________________________________________________________________________________________________________________

71) Which of the following best describes SAP Customizing? (Single Choice)a. Writing new ABAP Programs to satisfy business needsb. Entering Master datac. Configuring business process to meet the requirementsd. Installing the R/3 software as per recommendationse. Creating users and granting authorizations

72) The Customizing Client should have the option in SCC4 as: (Single Choice)a. No Changes Allowedb. Changes w/o automatic recording of changesc. Automatic recording of changesd. Changes w/o automatic recording, no transports allowed

73) Before releasing a change request, the following tasks should be completed (Multiple Choice)a. All tasks must have previously been releasedb. SE09 needs to be installedc. TMs has to be configuredd. All tasks must have previously been tested

74) List at least three things that are automatically generated when a Transport Domain Controller is first created

______________________________________________________________________________________________________________________________________________________________________________________________________________________________

75) Draw a Transport Route (in Graphical Editor Mode) for a 3 system landscape with SIDs D01 (Development), Q01 (Quality), P01 (Production). Include another Production system with SID P02 in the transport Route. The IT Department decides to have the development changes to be transported to Training System with SID T01 for urgent training requirements. Place the same in the Transport Route? (Use assumptions wherever required)

TADM51

1 - Is data written to the Oracle transaction logs (redo logs) before or after the information is written in the database files?Click on the button next to the right answer.

A. BeforeB. AfterC. SimultaneouslyD. The priority and sequence of database writes and transaction log writes is controlled by the parameter

"dblg_after" in the ORACLE initialization file.E. Randomly, sometimes before, sometimes after.

2 - What is the primary function of the $ORACLE HOME/saparch directory?Click on the button next to the right answer.

A. The saparch directory is a work area for the R/3 database utilities.B. The saparch directory is a work area for the R/3 Instance tasks.C. The saparch directory is used as the holding area for online database backups instead of writing them to

tape.D. The saparch directory holds the archived database log files.E. The saparch directory contains the current database transaction log files.

3 - Which customer specific specific files does sapdba save during an offline backup to insure that the Oracle database could be restored to a consistent state in case of problems?Click on the button next to the right answer.

A. The Oracle executables files.B. The Oracle database transaction log files and archived log files.C. The tablespace data files, database transaction log files, and the database control file.D. The database archived log files and R/3 Syslog file.E. The database transaction log files and the R/3 transport structures.

4 - Which customer specific files must be saved during an online database backup to be able to restore the Oracle database to a consistent state ?Click on the button next to the right answer.

A. The Oracle executables, database parameter file, and the tablespace data files.B. The Oracle online redo log files and the database control file.C. The archived log files, database control file and the Oracle executables.D. The tablespace data files, database control file, and all database redo logs written during the online

backup.E. The tablespace data files, database control file, and the database parameter file.

5 - What is the primary function of the $ORACLE_HOME/sapbackup directory?Click on the button next to the right answer.

A. The sapbackup directory is used for database backups which are written to disk.B. The sapbackup directory is a work area for the R/3 Instance tasks.C. The sapbackup directory is the temporary holding area for the database transaction logs (redo logs) before

they are automatically written to tape.D. The sapbackup directory holds the archived database log files.E. The sapbackup directory is used by the R/3 database utilities during database reorganizations.

6 - What is the name of the brbackup and brarchive parameter file for an Oracle database used by an R/3 Central Instance with SAP System ID C11?Click on the button next to the right answer.

A. initC11.iniB. initC11.oraC. initC11.sapD. sapdba.iniE. initC11.dba

7 - When using a tape device that supports hardware compression which of the following statements is true ?Note: There is more than one right answer! Click on the buttons next to the right answers.

A. The tape_address and tape_address rew init<SID>.sap parameters are automatically calculated based upon the value of the "compression" parameter.

B. Drivers for hardware compression must be specified for the tape_address and tape_address rew parameters in the init<SID>.sap file.

C. The compression ratio is calculated using "brbackup -k only" immediately after installation and should be repeated at least once a month to update compression ratios.

D. The compression ratio should be calculated using "brbackup -k only" immediately after installation and never needs to be repeated.

E. The "compression" parameter should be set to "hardware" in the init<SID>.sap file.

8 - Sapdba and the Computer Center Management System (CCMS) use operating system level programs for certain database administration tasks. Which program would be called by CCMS for backing up the data files for the PSAPBTABD and PSAPBTABI tablespaces?

Click on the button next to the right answer.

A. BrarchiveB. BrconnectC. sapdba –bD. brbackupE. backoffl

9 - What are the 3 different Oracle database startup modes?Click on the button next to the right answer.

A. Warm, cold, maintenanceB. Mount, nomount, openC. Online, offline, utilityD. Level 1, level 2, level 3E. Normal, restrict, utility

10 - What are the 3 different Oracle database shutdown modes?Click on the button next to the right answer.

A. Warm, cold, maintenanceB. Level 1, level 2, level 3C. Normal, immediate, abortD. Regular, active, passiveE. Standard, now, kill

11 - What is the primary purpose of the $ORACLE_HOME/sapreorg directory (Windows NT: $ORACLE_HOME\sapreorg)?Click on the button next to the right answer.

A. The sapreorg directory is a work area for the R/3 database utilities.B. The sapreorg directory is a work area for the R/3 Dialog Instance Tasks.C. The sapreorg directory is used as the holding area for online database backups instead of writing them to tape.D. The sapreorg directory holds the database transaction log files.E. The sapreorg directory contains the archived database log files.

12 - Based upon the information in the initial sapdba program menu, what is the name of the parameter file used by Oracle when the database is started?The name of the Oracle parameter file is:spfilesid.ora, initsid.ora Type the correct file name in the field provided.

13 - What is the purpose of the Oracle "OPS$connect" function?Click on the button next to the right answer.

A. OPS$connect authorization allows an operating system user to connect to the database without being prompted for a password.

B. OPS$connect is an Oracle command enabling whoever executes it to administer the database without using sqldba.

C. OPS$connect is used in Oracle Parallel Server installations to enable remote database connections over a LAN.

D. OPS$connect authorization is required of all database users and is required for connection to the database.E. OPS$connect enables the R/3 System saposcol process to communicate and exchange data with the

database.

14 - What is the name of the alert log file for an Oracle database using a system identifier (SID) of C11?Click on the button next to the right answer.

A. ora_log_C11.logB. ora_log_C11.trcC. alert_C11.logD. alert_C11.trcE. orasrv.log

15 - What happens if a table wants to allocate another extent but there is not enough contiguous free space in the tablespace?Click on the button next to the right answer.

A. The extent is allocated in another tablespace.B. The Oracle error message ORA-1653 is sent to the Syslog file and to the ABAP/4 short dump.C. The extent is distributed across the free space that is available.D. Oracle dynamically reorganizes the tablespace to make all available space contiguous.E. The database switches into maintenance mode and sends a system message to the database administrator.

16 - What action needs to be taken when Oracle returns an ORA-1653 error, failure to allocate an extent for a table in a specific tablespace?Click on the button next to the right answer.

A. The tablespace should be moved to a faster disk so that Oracle can find the extents quicker.B. The tablespace size should be increased by adding 1 or more datafiles.C. This is an Oracle internal error message which should be registered with Oracle immediately.D. The database must be shutdown immediately to avoid damage.E. The affected table should be dropped to avoid similar problems in the future.

17 - Under which circumstances does a table/index have to be reorganized?Click on the button next to the right answer.

A. If the extents belonging to the table/index are distributed across several data files.B. If a log switch occurs before a database commit is completed.C. If the tablespace overflows during a redo log file switch.D. If an archiver stuck situation occurs during a write to the table/index.E. If the table/index reaches the upper limit for the MAXEXTENTS parameter value when attempting to

allocate another extent.

18 - Which Oracle component dynamically maintains information about the status of the database redo logs, database mode, names and paths of database files, and is essential during a database recovery?Click on the button next to the right answer.

A. The Oracle parameter file, init<SID>.ora.B. Each tablespace data file contains this data for the whole database.C. The Oracle control file, cntrl<SID>.dbf.D. The SGA definition file, sgadef<SID>.def.E. The sapdba parameter file, init<SID>.dba.

19 - An Instance error occurs when 1 or more Oracle background processes become corrupted. What actions should the database administrator take to correct the problem?Click on the button next to the right answer.

A. This is a serious error. Call the Oracle hotline.B. Shutdown the operating system and reinstall the Oracle software.C. Shutdown abort and startup open. The SMON process will use the current redo log files and

checkpoint information from the control files to execute an automatic instance recovery upon database startup.

D. Shutdown the operating system and turn all hardware off. After the hardware cools off start everything up again and execute Orainst using the repair option.

E. Restore all missing files, apply the offline redo logs, update the control files, and execute the startup open command.

20 - Which files must be restored from tape to allow a full database restore and recovery ?Click on the button next to the right answer.

A. Database control file, tablespace data files, and the database alert log.B. Tablespace data files, database control file, and all archived database transaction logs created since

the last full backup.C. $ORACLE_HOME, Oracle parameter file, tablespace data files.D. Database control file, tablespace data files, R/3 Syslog, R/3 Transport directory.E. Oracle parameter file, tablespace data files, and the Oracle control file.

21 - The R/3 System Oracle database has 4 online redo logs, also known as database transaction logs. Each online redo log has a mirrored copy. What is the effect of a log file switch?Click on the button next to the right answer.

A. The current online redo log gets copied to its mirrored copy, upon completion the next online redo log becomes open for writing.

B. The database alternates between writing to the online and offline redo log files.C. The database switches between writing to the original redo log files and the mirrored redo log files.D. The current R/3 Syslog file gets copied to the saparch directory and a new Syslog file is created.E. The current online redo log gets closed and the next online redo log gets opened for writing. The

ARCH process gets triggered to begin backing up the recently closed redo log.

22 - Which statement is true of online Oracle database backups ?Click on the button next to the right answer.

A. Users may only read data and may not enter data until after the backup is done.B. Database transaction logs (online redo logs) are not written during online backups.C. The tablespace data files and control file comprise the complete online backup and are all that is necessary

for restoring the database to a consistent status.D. The database must be running in archivelog mode.E. Online database backups are not supported by Oracle.

23 - Given Oracle database with system ID C11. If tablespace PSAPBTABD has been extended 200 MB by adding another datafile which of the following statements is true?Click on the button next to the right answer.

A. In the event of a full database restore the new tablespace data file will be automatically created based upon information in the initC11.ora file.

B. All data files for PSAPBTABD should be backed up along with the database control file to maintain database recoverability.

C. The database should be shutdown and started up again to register the existence of the new file in the Oracle internal system tables.

D. The data files for PSAPBTABD, the control file, and the redo logs must be backed up to maintain database recoverability.

E. An R3INST database copy should be run to create a clean copy of the complete database.

24 - What is the highest priority when planning the distribution of the database transaction logs, mirrored transaction logs, archived transaction logs, and tablespace data files over multiple logical device groups?Click on the button next to the right answer.

A. Better performance through more hardware.B. More flexibility in case of hardware failure.C. Easier database backups and quicker restores.D. Higher data security and easier administration.E. To make the system physically more modular for transport reasons.

25 - Which of the following oracle parameters should never be modified in the init<SID>.ora file?Note: There is more than one right answer! Click on the buttons next to the right answers.

A. db_block_buffersB. db_block_sizeC. db_nameD. controlfilesE. shared_pool_size

26 - Which of the following configurations would have the slightest impact upon data security and/or performance?Click on the button next to the right answer.

A. Operating system swap and Oracle tablespace data files installed on the same physical disk(s).B. Operating system swap and SAP kernel (executable files) installed on the same physical disk(s).C. Operating system swap and Oracle database transaction logs (redo logs) installed on the same disk(s).D. Operating system swap and the /usr/sap directory on the same physical disk(s).E. Oracle database archived log files (offline redo logs) accessed over a shared (or NFS) directory connection.

27 - The physical separation of database logs from their mirror copies means?Click on the button next to the right answer.

A. Using physically separate partitions of a physical disk.B. Using physically separate disks.C. Using physically separate disks in the same logical device group.D. Using generic database utilities to split the flow of data between randomly chosen operating system

directories.E. Use of database specific utilities to fork log backups to 2 physically separate backup media.

28 - Which of the following Oracle parameters should be modified in the init<SID>.ora file to enlarge the shared memory usage for the Oracle database instance?Note: There is more than one right answer! Click on the buttons next to the right answers.

A. log_archive_destB. db_block_sizeC. rollback_segmentsD. shared_pool_sizeE. db_block_buffers

29. brbackup tool can create a database backup when the database is up and running or when it has been shutdown. During an online database backup which of the following is TRUE? Click on the button next to the right answer.

A. Users must stop entering data but may continue working using read-only transactions.B. Users must stop working because their work would be unrecoverable in case of problems with the backup.C.Users may continue working without interruption.D.Power-users may continue working but data-entry users must log off.

E.Users must log off until the online backup is started but then may continue working

30. Which of the following statements are correct in regard to using a single run of BRBACKUP to save both the database files and the offline redo log files?Note! More than one answer is correct. Please click on the buttons next to the correct answers.A. BRARCHIVE is started immediately after the database backup is complete: no further intervention

by the database administrator is necessary.B. This technique can only be used for offline database backups, not online backups.C. The database backup and the backup of the offline redo log files must fit on one tape because

changing tapes is not supported.D. You can backup the database using multiple tape devices in parallel.E. The tapes used must have been initialized by BRBACKUP.

31. What happens during the startup of an Oracle database?Note! More than one answer is correct. Please click on the buttons next to the correct answers.A. The SGA is created in shared memory according to the parameter settings in the configuration file

init<SID>.ora.B. The Oracle background and shadow processes are created.C. In the mount phase, all copies of the control file are opened.D. If necessary, Oracle automatically performs an instance recovery.E. As the last step, the online redo log files are cleared and the data files are opened.

32. What happens during the shutdown of an Oracle database?Note! More than one answer is correct. Please click on the buttons next to the correct answers.A. When you shutdown the database with the NORMAL option, the database system disconnects all users

before shutting down the database.B. When you shutdown the database with the NORMAL or IMMEDIATE option, the database system

writes a checkpoint before shutting down the database.C. When you shutdown the database with the ABORT or IMMEDIATE option, open transactions are rolled back

before the database is shut down.D. When you shut down the database with the ABORT option, the R/3 system is shut down, too.E. Shutting down the database with the ABORT option always requires an instance recovery at the next

database startup.

33. Which of the following statements express part of the SAP-recommended strategy for creating and updating the table statistics used by the cost-based optimizer?

Note! More than one answer is correct. Please click on the buttons next to the correct answers.A. No statistics are created for R/3 pool and cluster tables.B. Statistics are created for all transparent tables that have no statistics.C. The table DBSTATC can be used to trigger an exact computation of the statistics of specific tables.D. The update for table statistics refreshes all transparent tables.E. The table DBSTATC can be used to detect which table statistics need to be refreshed.

34. What happens if a table wants to allocate another extent but there is not enough contiguous free space in the tablespace? Click on the button next to the right answer.

A. Please click on the button next to the correct answer.B. The extent is allocated in another tablespace.C. The extent is distributed across the free space that is available.D. The Oracle error message ORA 1653 is sent to the file SYSLOG and to the ABAP short dump.E. Oracle dynamically reorganizes the tablespace to make all available space contiguous.F. The database switches into maintenance mode and sends a system message to the database

administrator.

35. When the R/3 update task aborts with an Oracle error ORA1653 - failure to allocate an extent for a table in a specific tablespace - what action needs to be taken?

Note! More than one answer is correct. Please click on the buttons next to the correct answers.A. The tablespace should be reorganized.B. The tablespace size should be increased by adding a new data file.C. The table should be reorganized.D. The storage parameter MAXEXTENTS must be increased.E. After the cause of the error has been removed, the R/3 update task must be reactivated.

36. Which of the following checks are useful for database performance monitoring?Note! More than one answer is correct. Please click on the buttons next to the correct answers.

A. Checking that the CBO statistics are refreshed once a week according to the strategy recommended by SAP.

B. Checking that the archive directory contains enough free space.C. Checking the data buffer quality.D. Checking the shared cursor cache for expensive SQL statements.

E. Checking for tables with more than 100 extents.

37. ___________ is used as default user when you can an SAP tool for Oracle administration.Click on the button next to the right answer.

A. SYSTEMB. SYSDBAC. SYSOPERD. SAP<SCHEMA-ID>E. SIDADM

38. Name the standard Database users created in Oracle.Note! More than one answer is correct. Please click on the buttons next to the correct answers

A. SIDADMB. ORASIDC. SYSD. SAP<SCHEMA-ID>E. SYSTEM

39. The recommended method of changing the password of SAP<SCHEMA-ID> isClick on the button next to the right answer.

A. SQL> ALTER USERB. SAP tool BRCONNECTC. SQL > ALTER USERD. SQLPLUS>CHANGE PASSWORDE. SAP tool BRUSER

40. The Oracle tool to test the connection to the database with SID C11 ON HOST twdf0505 is Click on the button next to the right answer.

A. TNSLISTENERB. lsnrctl startC. tnspingC11D. CONNECTE. BRCONNECT

41. Your daily backups are performed with automatic tape selection, no volume for backup is specified. Which tapes will be accepted for backup (assuming the tape lock period is expired in all cases.)Note! More than one answer is correct. Please click on the buttons next to the correct answers

A. any labeled tapeB. the tape labeled with the volume name you got from DB13, Goto Tapes needed.C. A tape labeled with volume name scratchD. Any unlabeled tape.

42. The BR*TOOLS profile init<DBSID>.sap can be edited by;Click on the button next to the right answer.

A. BRBACKUPB. BRARCHIVEC. BRTOOLSD. Operating system editor.E. None of the above.

43, To perform a complete database reset, you need one of the following backups.Note! More than one answer is correct. Please click on the buttons next to the correct answers

A. complete offline backupB. complete online backup

C. consistent online backupD. backup of offline redo log files.

1. All customizing requires customizing request2. Log file created by Sapinst3. Some features of SAPinst remote installtion4. Use of sapevt and sapxpg5. Port No. of Message server, Printer port6. There was something about the port no. 31007. Component of Dialog response time8. Component of GUI response time9. Relationship between CPU Time and processing time. Like which one should be more.10. Memory requirement for per user concurrent connection11. Percentage of memory and CPU utilized by Database12. There was one question on CUA13. There was at least 5 true and false on LDAP and director services14. Enhancement of security feature of SAP like SNC, SAPRouter, SAPlogon, 15. There were Four True and false on Logon group Load balancing16. During Logon group Load balancing, server process from which all servers can process the request of a user .17. User from a logon group1 can logon to the logon group2 ?18. There were 10 true and false on Track Management (Java Book Chapter 7)19. There were at least 10 true and false on CBS, CMS, DTR like what all authorization are there with developer and

administrator20. What is the difference between Central administration and local administration of these CBS DTR CMS

component21. What is the function of SLD-(1 complete question)22. what is the tool for configuring ITS Parameters- simple one true and false23. One screen shot about Buffer gets24. Database: Around 20 questions from Milan’s TDM 51 questions Paper (Go through it carefully)25. Which is better tuning of SQL Statements or creating a index of Tables.26. Around 5 True and false on optimizer 27. What enqueue/dequeue does.28. after copying SAP* & DDIC should these users to be deleted for security purpose29. There were 6-7 questions between the relationship Role, Authorization Profile, Authorization.30. Around 5 questions on the Enterpise Protal Roles, 31. How EP role, Workset, Iviews, Pages are connected32. Question on rdisp/buffrefmode=sendon,exeauto and also about bufreftime33. question about ztta/roll_first, ztta/roll_memory, heap memory and extended memory34. What Is the content of Directory BRBACKUP35. Can we change the Rollback tablespace into UNDO Tablespace if yes then how?36. Communication between SAP GUI and SAP Application server.37. Is installtion of SAPInst is necessary before then installation of other JAVA Central or Dialog Instance.38. Which all is based on Netweaver technology

Like SAP all, SAP Business One, SAP EP, ………

(In total chapter 7 java book had at least 25 true and false)

Rest of the questions I will put by Monday.

Ashish SurekaE-Mail: [email protected]: 09811422943

No of questions

mailto:[email protected]

TADM12 80 qtnsMysap technology 14 System Administration 22 Advanced System admin 3Software Logistics 30 Workload Analysis 10 Installation requirements 1

TADM51 40 qtnsTroubleshooting 7Administration 7Performance Optimization 2Restore&recovery 6Device Config 9Backup 9

1. Parameter rdisp/mshost found in which profilea)defaultb)start profilec)Central instance –instance profilec)Application Instance – instance profile

2. Parameter rdisp/vbname found in which profilea)defaultb)start profilec)Central instance – instance profilec)Application Instance – instance profile

3. One screen dump of sytem status . find the Database host name?4. Performance optimization

SQL statement given –screen dump of ST04 detail analysis SQL request& ST04 main screen dump- Single choice onlyTo find SQL statement is expensive or nota)buffer gets > 5% Total Reads so Statement is expensiveb)buffer gets > 5% Physical Reads so Statement is expensivec)Statement is not expensived)Very high buffer gets so statement is expensivee)High no of execution so statement is expensive

5. Program ZZSLOW is there and it access ZZTABLE .And want to improve the performance(multiple choice )a) create an index on ZZTABLE and this is preferred over option of tuning SQL statementb) Creating an index would definitely improve the performancec)Tuning the SQL statement would solve the performance and is preferred over Index Creationd)Optimizer may choose wrong index after creation of the index

6. One screen dump of update termination .7. Sequence of Updates V1 & V2

a) both occur independentlyb) first V1 and then v2c)both simultaneously

8. How many minimum V1 and V2 processes should be there?If V1 process is only there and there are not V2 process then will V1 process will handle V2 updates as well ?? True/False

9. Which of the foll. Traces can be started without restarting SAP systema)Buffer Traceb)SYSLOG Tracec) Database Traced)Dispatcher Tracee)Authorization

10. Analyse problem of system startup. Before anyone could login system stops . Check using(multiple choice)A)check sm21

b)/usr/sap/log directoryc)analyse database error log in detailsd)check files in \usr\sap\<instance>instance_no\work foldere)check files in sapbackup folder

11. Sapdba –check is used to (multiple choice)a) check & displays the status of all datafiles along with complete path nameb)lists free space usage of index & tablesc)check for consistency of databased)check for failed brbackup & brarchive backuope) check for values of active database parameters

12. Update optimizer statistics jobs does … (multiple choice)a) Not update statistics of pool and cluster tablesb)update statistics of all transparent tables.C) update statistics of all transparent tables who doesn’t have any staticticsD) Check DBSTATCO for updation of selected tablesE) updates only statictics for DBSTATCO

13. One screen dump of sapdba…Archive stuck situation is possible

14. One screen dump of backup failuretrying to take offline backup while R/3 is on

15. One screen dump on TIME_LIMIT_EXCEED explanations and some questions.16. What of the foll. Components are in mysap technology

a) SAPGUIb)mysap databasec) ITSd)SAPDBe)

17. Can Wgate and Webserver be on different boxes.18. From where can ITS be adminstrerd -multiple choice

a) from within SAP systemB) from web serverc) from ITS admin instance

19. Which of the following files are required for transport in to QAS systema)transport.pfgb)DOMAIN_DEV.cfgc)TP_DOMAIN_<SID>.pfld)tpimport.pfg

20. Which is the sapbda & brarchive parameter file21. Files Required to do full database & recovery22. File backed up during online backup23. File backup up during offline backup24. Questions on RFC+CPIC time & Roll Wait Time25. Uses of solution manager26. Sapdba supports following (multiple choice)

a)2 step backup, first disk then to tapeb)Replication databasec)

27. Enque table is stored in (single choice)a) Table Tlock in databaseb)In Central instance at file level c) in shared memory of the Central instanced)In shared memory of each SAP instance

28. Enque/deque is related toa) lock & unlocking at Database levelb)Lock & unlock of SAP transactionsc)

29. Locking process of SAP transactions carried out bya) Dialog process

b)enque processc)Message server process

30. A communication is to be done between 2 systems, such that none should use anonymous logon for misuse to do remote logon to target system (multiple choice)a) if you do not give RFC target system,system no etc. then a default Logon is performed on to 000/own system with user SAPCPIC. b)To create a communication user in su01 and specify it in target destination c)to keep logon details blank so that each user has to specify the detials every time a connection is made

31. Which process first connects to the database ?a) Dispatcherb) Message serverc)Work processd) SAPGUIe)Gateway

32. What is the startup sequence of the SAP system?(multiple choice)a)Database ,gateway ,dispatcherb)Dispatcher ,gateway ,databasec)Database , dispatcher ,gatewayd)etc.. etc…

33. SCU0 along with SM30 can be used to (multiple choice)a) compare clients within same systemb)compare different clients within different systemsc)Can be used to adjust customizing alongwith SM30d)Can be used to comapare transaction tables

34. User in 000 used to logon to a newly installed systema)sap* ,passb)sap*,19920706c)ddic,06071992d)ddic,19920706c)system/pass

35. Password of SAP Dictionary usera)DDIC,06071992b)SAP*,passc)DDIC,19920706d)SAP*,06071992

36. User/Password in newly created clienta)DDIC,06071992b)SAP*,passc)DDIC,19920706d)SAP*,06071992

37. With OPS$connect mechanisma)OS user need not enter the password during database connection (T/F)b)SAPDBA always uses ops$connect mechanism (T/F)c)d)

38. At then end of prepare phase which log file is createda)R3up.logb)prepare.logc)Checks.logd)upgrade.log

39. Allocation sequence of DIA work processa)rollfirst,heap memory until exhausted,remaining of roll area,then Extended memoryb)rollfirst,Extended memory until quota reached,remaining of Roll area, then Heap memoryc)

40. 3-4 Questions on Device configuration …..( swap space,online logs,sapdata files on RAID5 or RAID1., on same disks,.. etc)

41. To check & avoid block corruptiona) Use RMAN level 0 backup with SAP tools for backup

b)brbackup and brarchive always check for coruptionc)use –w use_dbv option with brbackupd)oracle automatically checks for block corruption

42. How to create additional Sap service marketplace users (single choice)a)one user Sapadm always there for every customer b)At customer place the user with Administrator rights can create additional usersc)Create an oss message for creating additional usersd)has to check license& contract between SAP & customer

43. Buffering for a frequently updated table should be (single choice)a)single record bufferedb)generic bufferedc)No bufferingc)Full buffering

44. For buffer synchronisationa)In central system only way is to make bufrefmode=sendon/exeautob)In central instance and all dialog instance it should be bufrefmode=sendoff/exeautoc) In central system it should be bufrefmode=sendoff/exeautod)In central system and all dialog system in exceptional conditions may be set as bufrefmode=sendoff/exeauto

45. One screen dump on Load average of ST06 screen (Single Choice)a)Load average is the Average CPU utilisation of the serverb)No. of CPU processes waiting in front of the CPUc)d)

46. Client copya)Remote copy creates huge file in operating system level in target systems (T/F)b)Client copies can be done within same system(T/F)c)Remote Client copy can be done using parallel processes (T/F)d)

47. From external programs which process is used to trigger an event within an SAP system(Single Choice)a)sapxpgb)gwrdc)dpmond)sapevte)disp+work.exe

48. From SAP system which process is used to start external program & external commands (Single Choice)a)sapxpgb)gwrdc)dpmond)sapevte)disp+work.exe

49. How many spool work process can be configured (Single Choice)a) one per sap instanceb)one per SAP systemc) more than one per SAP instanced)one on the Central instance

50. In 3 system landscape from where the request can be imported in QAS system (Single Choice)a)Only from DEVb)Only from QASc)From all of the 3 systemsd)only from PRD

51. Some questions on TMSa)TMSADM are automatically created in 000 client (T/F)b)TMS* RFC’s are automatically generated c)

52. SAPCONNECTa)sapconnect only works with RFC destinations (T/F)b)if you configure sapconnect in client 000 then it is available to all other clients(T/F)c)for Auto reaction method sapconnect needs to be configured in client 000 (T/F)d) for External mail configuration an connection has to be maintained in SCOT (T/F)e)No extra setting required for Mail config(T/F)f)An program has to be scheduled so that sapconnect send external mails . (T/F)

53. RZ20/RZ21a) in order to add create new monitor set you have to switch to ‘Activate Maintenance function mode’ (T/F)b)It is recommended to copy Entire Monitor Set and then make changes to it (T/F)c)It is recommended to keep monitor set with minimum monitoring objects so that loading time of the set is minimum (T/F)d)You should maintain the threshold values of the monitor set (T/F)

54. When you do a modification then (single choice)a)The package /dev class of the object has to be changed to customer dev. Classb) The package /dev class of the object is within that of SAP and cannot be changedc)d)

55. A customer wants to restrict modification what should he doa) change to not modifiable in Se06 system change option (T/F)b)avoid modification by using enhancements & Business Addins(T/F)

56. Further on modificationsa)Every modification has to be registered as SAP Service marketplace (T/F)b)Every manual modification required Developer Acess key for the developer (T/F)c)Modification request has to be sent to SAP thru FAX(T/F)d) All modifications should be done in DEV system for techincal reasons (T/F)e)If modifications done then further work is required during upgrades (T/F)

57. Use of native SQLa) Will always improve the performance (T/F)b)Will remove the programs from being database independent(T/F)c) data accessed will not be buffered (T/F)d)

58. Operation mode switch from BTC to DIAa)if jobs are running in BTC process then operation modes will be switched after the jobs are completed (T/F)b) if jobs are running in BTC process then operation modes switch will be cancelled (T/F)c)The running jobs would be temporarily put in suspended status (T/F)d)

Dear All,

Here are the questions I got. I have marked answers in Bold. Of course these were the answers I gave, so it may be wrong also. If you feel there is a wrong answer please let me know.

I will update all Java and other questions by Wednesday.

1) Different types of RFC:a) Synchronous RFCb) Transaction and Asynchronous RFCc) Queued RFCd) Fast RFCe) Real Fast RFC

2) What security types and methods can you use along with WEB AS 6.20a) Store and Secure Forward (SSF) b) Secure Network connection (SNC)c) Secure ABAP protocol (SAP)

d) Secure JAVA protocol (SJP)e) Secure socket Layer ( SSL)

3) Archiving, physical path, logical path, and start time of archiving will be given. A screen dump will show the parameters. Need to identify the output archive file – global that will be generated

- Had a screen shot. In that physical path was shown. Like: Global..<PARAM _3> ……- And based on the details given you have to identify the correct file name.- In options I had four diff. file names. Out of which 2 you can simply take out as it were not as per the path specified in

the screen shot. I think the key word here missing in these 2 options was GLOBAL.- Out of the remaining two, you could easily find out the name as it was as per the screen shot and was indicating

GLOBAL word in it.

4) Total number of clients supported per SAP systema) Starting from 000 and going up to 999 ( i.e. 1000 in total)b) 994 c) 998d) 003

5) How does SAP system pick up system timea) BASIS administrator needs to set up system time b) It picks up the time from Database Instance c) It picks up the time from Central Instanced)

6) In case of MCOD, State whether the following statements are True / False

I had some different options than following one we all know.a) Work process connect to Database using the one and same DB user b) Migration from Non-Unicode to Unicode is possiblec) Unicode and Non-Unicode systems exists in the same database

New options I had:You can convert from MCOD to non-MCOD - FYou can convert from non-uni code from MCOD -F

7) Which statements regarding Upgrade are truea) Installing the new kernel is part of upgrade – F: as it is Kernel update and not upgradeb) Including the patches is part of the upgrade - Tc) Any modifications done, needs to be taken care of - Td) You can ignore errors from previous upgrade attempts.- Fe) Modifications done, will increase upgrade work during next upgrade –T

8) From Transaction SM50 , you can find details about:a) Transactions that are causing maximum loadb) User who is generating maximum loadc) Table name, a particular transaction is usingd) SQL statement , that is creating the load

10) Which of the following statements are correct in regard to upgrades?

a) Objects in the customer namespace are not overwrittenb) All customer modifications to ABAP Dictionary object are lost

11) Which of the following statements are correct in regard to the SAP Patch Manager?a) The SAP Patch Manager ensures that Support Packages are applied in the correct sequence - Trueb) The SAP Patch Manager does not check whether the type of Support Package you wish to apply is appropriate

for your R/3 installation. It is up to you to decide whether, for example, you require a Conflict Resolution Transport. - False

c) The SAP Patch Manager does not offer you the chance to protect SAP objects that you have modified. These objects are automatically overwritten. - False

d) The SAP Patch Manager automatically prompts you to call the modification adjustment Transactions SPDD or SPAU if necessary - True

12) Which of the following statements are correct in regard to Support Packages?

a) Support Packages change the SAP standard of your R/3 System in advance of the next R/3 Release upgrade- True

b) You can apply all types of Support Packages to all R/3 installations, regardless of the components used in the installation - False

c) Support Packages are available only to customers who are participants in the First Customer Shipment (FCS) program - False

d) Different types of Support Packages may be required for R/3 Installations with different components - True

Hi,

here are some oracle questions.

In case of true / false, I have marked the correct one in Bold.

Will update Java questions soon……

Cheers………..


F. BeforeG. AfterH. SimultaneouslyI. The priority and sequence of database writes and transaction log writes is controlled by the

parameter "dblg_after" in the ORACLE initialization file.J. Randomly, sometimes before, sometimes after.


F. The Oracle executables, database parameter file, and the tablespace data files.G. The Oracle online redo log files and the database control file.H. The archived log files, database control file and the Oracle executables.I. The tablespace data files, database control file, and all database redo logs written

during the online backup.J. The tablespace data files, database control file, and the database parameter file.


F. The sapbackup directory is used for database backups which are written to disk.G. The sapbackup directory is a work area for the R/3 Instance tasks.H. The sapbackup directory is the temporary holding area for the database transaction logs (redo

logs) before they are automatically written to tape.I. The sapbackup directory holds the archived database log files.J. The sapbackup directory is used by the R/3 database utilities during database reorganizations.


F. initC11.iniG. initC11.oraH. initC11.sapI. sapdba.iniJ. initC11.dba


F. OPS$connect authorization allows an operating system user to connect to the database without being prompted for a password.

G. OPS$connect is an Oracle command enabling whoever executes it to administer the database without using sqldba.

H. OPS$connect is used in Oracle Parallel Server installations to enable remote database connections over a LAN.

I. OPS$connect authorization is required of all database users and is required for connection to the database.

J. OPS$connect enables the R/3 System saposcol process to communicate and exchange data with the database.


F. The tablespace should be moved to a faster disk so that Oracle can find the extents quicker.G. The tablespace size should be increased by adding 1 or more datafiles.H. This is an Oracle internal error message which should be registered with Oracle immediately.I. The database must be shutdown immediately to avoid damage.J. The affected table should be dropped to avoid similar problems in the future.


F. The Oracle parameter file, init<SID>.ora.G. Each tablespace data file contains this data for the whole database.H. The Oracle control file, cntrl<SID>.dbf.I. The SGA definition file, sgadef<SID>.def.J. The sapdba parameter file, init<SID>.dba.

8 – you have a database has 4 online redo logs, also known as database transaction logs. Each online redo log has a mirrored copy. What will happen at a log file switch?Click on the button next to the right answer.

F. The current online redo log gets copied to its mirrored copy, upon completion the next online redo log becomes open for writing.

G. The database alternates between writing to the online and offline redo log files.H. The database switches between writing to the original redo log files and the mirrored redo log

files.I. The current R/3 Syslog file gets copied to the saparch directory and a new Syslog file is

created.J. The current online redo log gets closed and the next online redo log gets opened for

writing. The ARCH process gets triggered to begin backing up the recently closed redo log.


F. Users may only read data and may not enter data until after the backup is done.

G. Database transaction logs (online redo logs) are not written during online backups.H. The tablespace data files and control file comprise the complete online backup and are all that

is necessary for restoring the database to a consistent status.I. The database must be running in archivelog mode.J. Online database backups are not supported by Oracle.


F. db_block_buffersG. db_block_sizeH. db_nameI. controlfilesJ. shared_pool_size


F. log_archive_destG. db_block_sizeH. rollback_segmentsI. shared_pool_sizeJ. db_block_buffers

12. Which of the following statements are correct in regard to using a single run of BRBACKUP to save both the database files and the offline redo log files?

Note! More than one answer is correct. Please click on the buttons next to the correct answers.F. BRARCHIVE is started immediately after the database backup is complete: no

further intervention by the database administrator is necessary.G. This technique can only be used for offline database backups, not online backups.H. The database backup and the backup of the offline redo log files must fit on one

tape because changing tapes is not supported.I. You can backup the database using multiple tape devices in parallel.J. The tapes used must have been initialized by BRBACKUP.

13. What happens during the startup of an Oracle database?Note! More than one answer is correct. Please click on the buttons next to the correct answers.

F. The SGA is created in shared memory according to the parameter settings in the configuration file init<SID>.ora.

G. The Oracle background and shadow processes are created.H. In the mount phase, all copies of the control file are opened.I. If necessary, Oracle automatically performs an instance recovery.J. As the last step, the online redo log files are cleared and the data files are opened.

14. What happens during the shutdown of an Oracle database?

Note! More than one answer is correct. Please click on the buttons next to the correct answers.

F. When you shutdown the database with the NORMAL option, the database system disconnects all users before shutting down the database.

G. When you shutdown the database with the NORMAL or IMMEDIATE option, the database system writes a checkpoint before shutting down the database.

H. When you shutdown the database with the ABORT or IMMEDIATE option, open transactions are rolled back before the database is shut down.

I. When you shut down the database with the ABORT option, the R/3 system is shut down, too.J. Shutting down the database with the ABORT option always requires an instance

recovery at the next database startup.


Note! More than one answer is correct. Please click on the buttons next to the correct answers.

F. No statistics are created for R/3 pool and cluster tables.G. Statistics are created for all transparent tables that have no statistics.H. The table DBSTATC can be used to trigger an exact computation of the statistics of specific

tables.I. The update for table statistics refreshes all transparent tables.J. The table DBSTATC can be used to detect which table statistics need to be refreshed.K. The table DBSTATC contains information about all tables and it is the only table you require to

get the statistics

I got this option – F, which was not there in the sample questions provided by abhijit. I missed this question as I was not sure about other answers….


Note! More than one answer is correct. Please click on the buttons next to the correct answers.F. The tablespace should be reorganized.G. The tablespace size should be increased by adding a new data file.H. The table should be reorganized.I. The storage parameter MAXEXTENTS must be increased.J. After the cause of the error has been removed, the R/3 update task must be reactivated.


F. Checking that the CBO statistics are refreshed once a week according to the strategy recommended by SAP.

G. Checking that the archive directory contains enough free space.H. Checking the data buffer quality.I. Checking the shared cursor cache for expensive SQL statements.J. Checking for tables with more than 100 extents.


F. SQL> ALTER USERG. SAP tool BRCONNECTH. SQL > ALTER USERI. SQLPLUS>CHANGE PASSWORDJ. SAP tool BRUSERK.19. Your daily backups are performed with automatic tape selection, volume labels are from vol1 to vol25. You discover that vol19 is damaged one day. Which of the following tapes will be accepted during next backup?

Note! More than one answer is correct. Please click on the buttons next to the correct answersE. any labeled tape with any name. it will automatically change to VOL19 when required during backupF. the tape labeled with the volume name you got from DB13, Goto Tapes needed.G. A tape labeled with volume name scratchH. Any unlabeled tape.I. Take a tape. Label it as vol19. It will be selected by backup

JAVA Questions:

I got 21 JAVA questions. I feel chapter 5,6,7 must be read carefully, as around 12 to 15 questions were from that.

1. Which s/w components allow load balancing in context of SAP web AS JAVA?

a) ABAP Dispatcherb) JAVA Dispatcherc) Massage Serverd) ICMe) Central servicesf) SAP Web dispatcher

2. In ABAP + JAVA installation, ICM connects to the JAVA dispatcher using which protocol?

a) DIAGb) CPICc) Memory Pipesd) HTTPe) HTTPSf) SMTP

3. It is advisable to put message server and enqueue process on one machine. ( True / False)

4. There was a question on startup and Control Frame work and Jcontrol / Jlaunch process

Read WEEK 2 book Page no: 56/57/58

Remember last paragraph of page 58 , location of profile file.

/usr/sap/<SID>/sys/profile

I had this straight question

5. Trace files and log files for each instance is stored in:

/usr/sap/<SID>/DEEBMGS00/work

6. In context of SAP web AS JAVA, which program is used to install Dialog instance?

a) SAPInst.exeb) Aaaaaaaaaac) Bbbbbbbbbbbbd) Ccccccccc

7. One question on how you can verify the location of installation Cds ?

- By clicking check Location check box during installation

8. Know about Config tool, Visual Administrator and Telnet. I had 2 questions on that.

e.g.

a) VM parameters can be configured by which tool ?i. Config tool. – This is the only tool to configure JVM parameters.

ii. Visual administratoriii. Telnetiv. Xxxxxxx

b) You need to restart JAVA instance after changing parameters using Visual administrator (TRUE/ FALSE) – As most of the parameters, changed by visual Admin, will be applied during runtime.

9. understand Global and Local settings in config tool and VA. Go through all Screen shots. Page 148/149/150 and from 161 to 170.

Everybody got one question based on these screen shots. So, don’t ignore…..!!!!

10. Almost everyone got one question on how to create Server process. Go through Page number 190/191 well. You will have one question from this screen for sure….

11. Everybody got one question from Attribute mapping with directory Services. Though every trainer categorically ruled out a possibility of questions coming from appendix, almost everyone got this question….!!!!!!

Read page 217/218 well.

12. Communication between UME and ABAP user management is performed with which user ?a. SAPJSFb. Zzzzzzzzc. Xxxxxxxd. Aaaaaaaa

13. The administration user for SAP web AS with ABAP and JAVA is:a. SAPJSFb. J2EE_ADM_<SID>c. J2ee_Admind. Aaaaaaaaa

14. Trace file containing information about entire Server, UME at os level.

a. <J2EERoot>/cluster/server X/log/defaulttrace.#.trc

15. Which UME properties can you influence with parameters?

a. Number of failed logon attempts before a user is lockedb. Average length of user namec. Password are automatically generatedd. Email notification if a user is locked by admine. Directory service data source : specification of instance numberf. SAP web AS ABAP data source: Specification of SID

16. following steps are required to configure SAPCCMSR agenta. Start agent registration in Visual Administratorb. Create CSMADMIN userc. Create CSMCONF filed. Setup RFC connection to Central monitoring systeme. Create CSMREG user

17. Know GRMG well. Everyone got one question on that. Page 348/349/350/351/353/352

During availability check with GRMG, an XML document is sent by which protocol ?a) DIAGb) CPICc) XMLd) SSLe) HTTPf) SMTP

Note: read about all traces and logging types. Central logging, Log viewer and Single activity trace, SQL trace etc well.

Note: Read chapter 6 and 7 well. You will get around 5 to 6 questions from that.

18. Which statements about tracks, systems and development configurations are correct?a. Track always contains exactly one development configurationb. A track generally contains multiple systemsc. A system consists of a development configuration and a runtime environmentd. A track is used for developing one software component in different release

19. Which statements about DTR and CBS are correct?a. DTR consists of an active and an inactive workspaceb. Checking development components into DTR means they can be used by other developersc. Activating development components in CBS means they can be used by other developersd. If the central build fails, the elements of active workspace are placed in inactive workspace

20. Which statements about transporting JAVA objects are correct ?a. When importing requests into consolidation system, the activation of objects is automatically

startedb. As in ABAP, only individual development objects and. In general, not the entire software components are

imported into the production systemc. During assembly, only links to required software components are createdd. All required software components are included in the archive to be created during assemble step

JAVA Questions:



g) ABAP Dispatcherh) JAVA Dispatcheri) Massage Serverj) ICMk) Central servicesl) SAP Web dispatcher












e) SAPInst.exef) Aaaaaaaaaag) Bbbbbbbbbbbbh) Ccccccccc




e.g.

















During availability check with GRMG, an XML document is sent by which protocol ?g) DIAGh) CPICi) XMLj) SSLk) HTTPl) SMTP








Software logistics – week 3 questions:

1. Features of SAPinst – Read page 19- I had one straight question2. Know non-unicode, Unicode and MCOD well. One question is sure- page 12 to 15

3. When high security setting are used on iSeries computers, password entries become case sensitive – TRUE / FALSE

4. while installing dialog instance, port number that you specify for message server port can be different from one specified on the central instance host.( TRUE/ FALSE)

5. you require SAProuter for:a. AAAAAb. SAPNet- R/3 front endc. Early watchd. Remote consulting

6. Which of the following activity is performed by installation check ?a. Completeness of installationb. Version compatibilityc. Accessibility of message serverd. Network security

7. One question on conversion from non-unicode to Unicodea. Read page 312 well. Everybody got one question on that

8. One question for sure on Changes and transports for client-specific objects and client-independent changesa. Read page 351 -352 well. They can ask what should be the setting for a specific type of change. E.g.

automatic recording of changes or changes to repository and cross-client customizing allowed etc. so go through these options well.

9. When you initialize TMS, following actions are automatically performed:a. Transport group GROUP_SID is createdb. Communication user TMSADM is created in client 000c. Transport profile TP_DOMAIN.PFL is created an stored in transport subdirectory bind. TMS configuration file DOMAIN.CFG is stored in transport subdirectory bine. RFC destinations required for TMS are generated

Note: read page 370 well. This is a sure question10. One question for everybody was there on Client-specific Transport Control

a. Read page 392-39311. One question for everybody was there on transport between transport groups and between transport domains

a. Read page 395 to 39812. Straight questions from page 401, question number 2 and 3. I got both13. Project leader and team member responsibility . One question for sure. Read Page 410.14. One question on customizing procedure. Know steps well. You can refer figure 280, page 430.15. One question on SSCR registration concepts. Read page 455.16. One question on requirements for releasing a task and releasing a change request. Refer figure 302, page 474.17. One straight question on IMG. Page 499; test your knowledge, question number 1.18. Page 499; test your knowledge, question number 4.19. One question on preliminary imports. page 51820. SAP recommends rejecting requests containing errors, during subsequent transports. ( TRUE / FALSE)21. Read about Import queue and import buffer. One question for sure. 22. One question for sure on TP import process. Figure 341-342; page 572, 573, 574. Know TRBAT, TRJOB,

RDDIMPDP , R3TRANS ( Like TP calls R3TRANS etc..) well.23. I had one question from trouble shooting transport page number 584, last paragraph. Log file format

a. Source SID><action><6digits>.TargetSID. some target system name was given and we have to find out log file name.

24. I had one question on command tp check all . page 59625. Two questions exactly same from test your knowledge page number 602. Question number 7 and 8.26. One question from client copy. Local and Remote client copy. Page 609, 610, 611. 27. can Client copy use parallel processing in Client transport- NO.

You can use parallel processing only in local and remote client copy.28. One question on client maintenance settings. Page 631. specifically protection levels.29. SAP notes can change ABAP dictionary objects ( TRUE/FALSE)

a. SAP notes does not require SSCR key ( TRUE/ FALSE)b. SAP note can contain prerequisites, interactions, and references to post processing activities

( TRUE/FALSE)c. SAP note contain solution for an error in source code of SAP ABAP program ( TRUE/ FALSE)

Note: read page 643 last paragraph30. Read page 669 . SPAM and SAINT. One question is for sure specifically SPAM and SAINT update.

Oracle:

1. connect / @DBSID options. Given few options and you have to choose the right one to connect to a DB with given SID

2. Page 39, work process connect to oracle3. Page 75, mount, nomount, etc. when do you need mount status??4. Page 75, shutdown modes. What will happen when its ABORT5. Q12 on page 916. Tape management. When you have a new tape. ie use scratch option7. Page 176, choose between Complete database recovery or Point-in time recovery or whole based on a given

scenario. For me it was going back to a backup before upgrade scenario. Similar to Q14 in page 2078. Q4 on page 2059. Page 219, data file size for a size given10. Locally managed tabelspace managed by NEXT, etc having few true / false11. One question on what yon can monitor using CCMS (page 257). There were 5 T/F out of which you need to select

the right monitoring attributes.12. Page 271, adding a data file options13. Reorganise question. Many T/F like Need to export & import to reorganize, Online redefinition, having LONG

fields14. One question in Archiver stuck & also where can you add a new log file. Page 309 15. Once question in page 21 (shared SQL Area slide)16. One question on Page 49. Date & also on Estimate & Compute17. Improve SQL by which order ie changing ABAP, creating an index, analyse table, etc18. What does $ORACLE HOME/sapbackup directory contain

From Milans questions: 4, 5, 7, 14, 15, 16, 25, 29, 33, 37 (but it was changes ie when using with SAP so it was SAP<SCHMA-ID>),

Installation & Software Logistics:

1. SAPinst features2. Pre-requist during install ie having all CD’s in parallel3. One question on JRE ie if it’s an old version what will happen, if home is not set, etc4. Need one install of SAP GUI installed5. For Unicode installation, MNLS must be selected or not6. Q2 on page 227 7. One screen shot as in page 266 and T/F like J2EE is running configured, etc, what will happen if it matches the

URL and it in the URL 8. Page 312 unicode to non-unicode9. One question on page 35110. Q5 on page 35711. Transport Group & domain ie system share directory called a group, domain, etc 5 T/F on this concept12. One question from page 37013. SAP objects can use Z<SID> routes or not, once SAP objects are saved, it must not be saved to SAP route, etc14. One question on Transport group15. Page 401, Q1, Q2, Q316. One question on Project IMG, what can be transported, etc17. What is a package18. Import queue & import buffer19. Import queue are processed in the same order as exported20. Urgent request using preliminary request21. Using workflow to transport from DEV to PRD22. What tables are used in tp process?? Ie TRBAT & TRJOB23. tp steps are collectively processed24. Remote copy creates local file T/F25. Remote copy can update multiple systems26. What happens during client compare & adjust27. One question on downtime minimized. Page 679

28. What tools are available during SAP upgrade29. Kernel gets updated during upgrade30. All support packages are grouped along with the upgrade step and are implemented in sequence31. One more question in SAP upgrade which I can’t remember. So don’t skip this chapter

1. External command authorization can be configurable or not2. Need to setup each front end printing device3. Use of logical spool servers4. Type of access method to printer5. How to add profiles to user eg. in pfcg, su01 & some wrong answers6. Type of RFC’s eg qRFC, sRFC, zRFC7. Type of security protocols in SAP like SNC, SSL, etc with 5 different T/F8. One question on Netweaver ie what components are there in Information integration9. One question on LDAP, ie multiple fields can be mapped or not to single field on directory service (similar type

relating to field mapping with 5 different T/F)10. 2 questions on Track in Java like what needs to be preconfigured for starting a development like configuring name,

system, etc, then different steps in the track11. 2 questions on SDM which I can’t remember and also did not know what the answer was. I think this was in

Appendix12. Adding a server in Java13. Different services from a list14. Different admin options of UME (adding users, etc)15. sapxpg to access internal program16. Notes assistant need SSCR, updates modification assistant, etc17. Reason for extended momory like fast content switching with many T/F18. Bypass buffer statements like select…bypassing buffer, select….using buffer, etc T/F

Sample Questions – Unit 4

1) In the Shared SQL Area, you find a Select statement with 10,000 logical read accesses per execution ("Gets/Execution"). What could be the reasons for the high number of read accesses? Note! More than one answer is correct. a) There is a hardware bottleneck (CPU or I/O) on the database server b) There is a network problem between the application server and the DB server. c) The database optimizer has decided in favor of the "incorrect" index OR there is no

appropriate index for the SQL statement. d) There are lockwait situations (Exclusive Lockwait) in the database. e) A large number of records are being transferred from the database to the ABAP program.

2) What is the quality in the following screen dump?a) 95.0b) 97.7c) 98.7d) 94.4

3) The typical ratio for “User calls” to “reads” from the data buffer for a well tuned R/3 system is approximately:a) 1:10b) 1:20c) 1:15d) 1:100

4) Expensive SQL statement in which there are many buffer gets but only a few records per execution can be tuned by:a) Update of optimizer statisticsb) Increasing the Redo log buffer areac) Change of ABAP coded) Creating an Indexe) Increasing the parameter db_cache_size.

5) What should be the command to update statistics in SAP release 6.10 and higher?a) Sapdba –checkopt followed by sapdba –analyzeb) brconnect –f checkc) brconnect –f statsd) brconnect –f statistics

6) Parsed SQL statements are stored in which of the following Memory area?a) Database buffer cacheb) Shared SQL areac) Redo log bufferd) None of the above

7) One of the expensive statements chooses an unsuitable access path leading to many buffer gets but only a few records per execution. Such type of statements can be tuned with:a) Update of optimizer statisticsb) Change of ABAP codec) Optimizing user input

xx.xx

d) Creating an index

8) One of the expensive statements chooses a suitable access path leading to many buffer gets and many records per execution. Such type of statements can be tuned with:a) Change of ABAP codeb) Optimizing user inputc) Creating an indexd) Tuning of the business process

9) During an investigation by a Basis administrator in the month of February 2005, he came across an expensive statement. What could be his initial reaction?a) Index is missing on the table.b) ABAP code needs to be changed.c) Table statistics is not up to date.d) None of the above.

10)Which of the following statement is true about “Estimated cost” displayed in the execution plan of an SQL statement using “Explain”?a) Estimated cost indicates either the expected number of buffer gets that must be

performed or the expected number of disk accesses.b) CPU time necessary to process the statement greatly influence the estimated costs.

11)An R/3 system has expensive statements if: (1) the number of buffer gets for the topmost statement exceeds 5% of the total number of reads. (2) The ratio of reads to user calls > 15.a) Falseb) True

12)Statements with many buffer gets per execution will lead to:a) High consumption of system resources during execution.b) Should have a low number of executions.c) Should not be executed during peak hours.d) None of the above

13)Which of the following table is used to update the accuracy of table statistics using DB21?a) DBMSGORAb) DBCHECKORAc) DBSTATCd) BDSTATC

14)For the purpose of calculating table statistics, method “Compute” means that only a part of the table is used for the analysis.a) Falseb) True

15)During the process of finding out the code that caused the expensive statement, it is now possible (As of release 4.6 B) to jump directly to the ABAP code from Shared Cache Area.a) Falseb) True

16)An ABAP Open SQL statement is different than the SQL statement in the Shared SQL Area in case of:a) Use of Internal tables (IN TAB)b) The command FOR ALL ENTRIESc) Projection viewsd) SAP Queriese) None of the above

17)Which of the following statements are true?a) The system administrator monitors the impact of expensive SQL statements in the system.

If the system is well tuned and properly sized, he can only analyze the situation and not solve it.

b) It is the job of end-users to optimize the coding, indexes and customizing and is responsible for the data model design.

c) In large installations it is always recommended to log the details of expensive statements in the system and send the summary to IT management if requested.

d) If an expensive statement is less critical, the user can be advised to run the same in the background or during periods of low system activity.

18) In case of an “Index Unique Scan” approximately how many blocks (table and index) could be accessed?a) 1b) 4c) 3d) 10

19)Suppose one large table ZVBAP has 10 fields apart from the primary key on the following 3 fields MANDT, VBELN and POSNR. Which of the following statement is correct?a) A statement such as: SELECT * FROM ZVBAP WHERE MANDT = ‘001’ AND VBELN =

‘0000123’ AND POSNR = ‘0001’ is of type “Index Unique Scan” and will result in more than 1 records.

b) A statement such as: SELECT * FROM ZVBAP WHERE MANDT = ‘001’ AND VBELN = ‘0000123’ is of type “Index Range Scan” and will result in 0 or 1 number of records.

c) A statement such as: SELECT * FROM ZVBAP WHERE MANDT = ‘001’ AND POSNR = ‘0001’ is of type “Index Range Scan”. However it is inefficient leading to the reading of many index blocks that do not contain the requested data.

d) A statement such as: SELECT MANDT, VBELN, POSNR FROM ZVBAP WHERE MANDT = ‘001’ AND POSNR = ‘0001’ will return the data from the index blocks. In this case data blocks do not need to be read resulting in less buffer gets.

e) A statement such as: SELECT * FROM ZVBAP WHERE MANDT = ‘001’ AND MATNR = ‘00815’ is of type unselective “Index Range Scan”. This may lead to reading a very large fraction of index blocks. In such kind of selects maximum Gets/Execution could be = Number of table rows + number of index blocks.

20)Which of the following is true about “Full Table Scan”?a) No index is used during a full table scan.b) Each data block is read once.c) Maximum Gets/Execution could be = Number of table blocks + number of index blocks

21)Which of the following statements are true?a) If table statistics exist, the Oracle cost based optimizer is used and the estimated cost for

the selected access path is > 0.b) If rule based optimizer is used than either ‘estimated costs = 0’ or no estimated costs at all

displayed in the explain output.c) In a query if the options used are not supported by rule based optimizer, the cost based

optimizer is used, although no statistics exist.d) None of the above.

22)Which of the following Oracle parameter control cost calculation functions?a) control_costb) db_file_multi_block_read_countc) eventsd) optimizer_index_cost_adje) cost_pool_size

23)What is SAP recommended value for db_file_multi_block_read_count?a) 16b) 8c) 10d) 24

24)Which of the following R/3 parameters control cost calculation functions?a) rsdb/max_blocking_factorb) dbs/ora/use_hints

25)What is SAP recommended value for rsdb/max_blocking_factor?a) 10b) 5c) 15d) 8

26)Which of the following statements about creating indexes are correct?a) Use only selective fields if possible.b) Use as few fields as possible. Thumb rule: Max 5.c) Create as many indexes per table as possible. There is no limit.d) You are free to change the index created by SAP.

27)Which of the following steps one can take before resorting to creating an index for a table in order to optimize an expensive SQL statement?a) Check for the missing index in DB02 and recreate them.b) Run update statistics.c) Change the code so that existing index can be used.d) Change SAP index without SAP approval.

28)Which of the following statements are true about “Similar Statements”?a) They use the same access path.b) Have the same or similar WHERE clause.c) Have different entries in the Shared SQL area.d) May not be individually expensive, but the sum of similar statements can be expensive.e) None of the above.

29)Are the following statements similar:SELECT * FROM V_MARA WHERE MANDT = ‘001’ AND KOSTL IN (A, B)SELECT * FROM V_MARA WHERE MANDT = ‘001’ AND KOSTL IN (A, B, C)SELECT * FROM V_MARA WHERE MANDT = ‘001’ AND KOSTL IN (A, B, C, …, Z)a) Yesb) No

30)The Shared SQL Area treats statements as “different” if the character string is different.a) Falseb) True

31)How can you avoid similar statements?a) Change the ABAP code so that statements match exactly.b) Use the ABAP command FOR ALL ENTRIES instead of IN conditions.c) Write the statements once in upper case and once in lower case when you are using third

party tools.d) All of the above.

32)Which of the following statements are possible optimization methods for expensive statements with suitable access path?a) Pull the statement out of the loop or nested select if the where clause of the driven

statement does not change.b) Do no think of join or view instead of the nested select as join could be very expensive.c) Process only those records that are required.d) None of the above.

Answers – Unit 4

1) c, e2) c3) c4) a, c, d5) c6) b7) a, b, c, d8) a, b, d9) c10)a11)b12)a, b, c13)c14)a15)b16)a, b, c, d17)a, c, d18)b19)c, d, e20)a, b21)a, b, c22)b, c, d23)b24)a, b25)c26)a, b27)a, b, c28)a, b, c, d29)a30)b31)a, b32)a, c

SAP R/3 Technical ConsultantCertification Program

SAP R/3 Release 4.6

Sample Questions

May 2000

NOTE: The following are examples of the types of questions that will appear in the certification examination. These questions will not appear in the actual examination.

Contents Page

Test Module: R/3 Basis - Questions 5Subject: R/3 System Architecture 5

Question 1 5Subject: R/3 System Landscape 6

Question 1 6Subject: R/3 System Management 6

Question 1 6Question 2 (Demotest) 7

Subject: R/3 Profile Maintenance 8Question 1 8

Subject: R/3 Monitoring 9Question 1 (Demotest) 9

Subject: R/3 Transport System 10Question 1 10Question 2 (Demotest) 10

Subject: R/3 System Upgrade 11Question 1 11

Subject: Authorization 11Question 1 11

Subject: Background Processing 11Question 1 11

Subject: Problem Recording and Handling 12Question 1 (Demotest) 12

Subject: Remote Connection & OSS 12Question 1 12

Subject: Workbench Organizer & Dictionary 13Question 1 (Demotest) 13

Test Module: UNIX - Questions 13Subject: R/3 Install Planning 13

Question 1 (Demotest) 13Subject: R/3 Installation Check 14

Question 1 14Question 2 (Demotest) 14Question 3 14Question 4 15

Subject: R/3 Installation on UNIX 16Subject: R/3 Installation on UNIX 16

Question 1 (Demotest) 16Question 2 16Question 3 17

Subject: R/3 Remote Connection 17Question 1 17

Subject: R/3 Disk and Device Setup 18Question 1 (Demotest) 18

Subject: R/3 Language Import 18Question 1 18Question 2 19

Subject: Copy & Install DB 19Question 1 (Demotest) 19

Test Module: ORACLE - Questions 20Subject: DB Device Configuration & Management 20

Question 1 (Demotest) 20Subject: R/3 DB Administration 21

Question 1 (Demotest) 21Question 2 (Demotest) 21

Subject: Database Backup 22Question 1 (Demotest) 22

Subject: Database Restore 22Question 1 (Demotest) 22

Test Module: R/3 Basis - Solutions 23Subject: R/3 System Architecture 23

Question 1 23Subject: R/3 System Landscape 24

Question 1 24Subject: R/3 System Management 24

Question 1 24Question 2 (Demotest) 25

Subject: R/3 Profile Maintenance 26Question 1 26

Subject: R/3 Monitoring 26Question 1 (Demotest) 26

Subject: R/3 Transport System 27Question 1 27Question 2 (Demotest) 28

Subject: R/3 System Upgrade 28Question 1 28

Subject: Authorization 28Question 1 28

Subject: Background Processing 29Question 1 29

Subject: Problem Recording and Handling 29Question 1 (Demotest) 29

Subject: Remote Connection & OSS 30Question 1 30

Subject: Workbench Organizer & Dictionary 30Question 1 (Demotest) 30

Test Module: UNIX - Solutions 31Subject: R/3 Install Planning 31

Question 1 (Demotest) 31Subject: R/3 Installation Check 31

Question 1 31Question 2 (Demotest) 32Question 3 32Question 4 33

Subject: R/3 Installation on UNIX 34Subject: R/3 Installation on UNIX 34

Question 1 (Demotest) 34Question 2 34Question 3 35

Subject: R/3 Remote Connection 35Question 1 35

Subject: R/3 Disk and Device Setup 36Question 1 (Demotest) 36

Subject: R/3 Language Import 36Question 1 36Question 2 37

Subject: Copy & Install DB 37Question 1 (Demotest) 37

Test Module: ORACLE - Solutions 38Subject: DB Device Configuration & Management 38

Question 1 (Demotest) 38Subject: R/3 DB Administration 39

Question 1 (Demotest) 39Question 2 (Demotest) 39

Subject: Database Backup 40Question 1 (Demotest) 40

Subject: Database Restore 40Question 1 (Demotest) 40

Test Module: R/3 Basis - Questions

Subject: R/3 System Architecture

Question 1

Based upon the information in this R/3 System Status screen, what is the network node name where the R/3 database is installed?

Answer 1:PSWDF694

Answer 2:PSWDF697

Answer 3:TC4

Answer 4:SAPMSYST

Answer 5:It is not possible to determine the node name based upon the information provided.

Subject: R/3 System Landscape

Question 1

Which of the following is recommended by SAP to be used for copying very large R/3 System clients?

Answer 1:Database export and import.

Answer 2:Generic operating system utilities.

Answer 3:The R/3 Client Copy transactions.

Answer 4:R3SETUP

Answer 5:SAPDBA

Subject: R/3 System Management

Question 1

When creating a logon group for Logon Load Balancing, which of the following can be specified?

Answer 1:Maximum allowable response time per logon group

Answer 2:Maximum number of users who may be logged on to the instance.

Answer 3:Name of the instance defined for the logon group.

Answer 4:Maximum number of sessions per user.

Answer 5:Maximum number of users who may be logged on to the logon group.

Question 2 (Demotest)

Which of the hosts in this networked SAP System diagram must have its respective R/3 component(s) started up FIRST before the other hosts can start theirs?

Answer 1:FE-1, FE-2, or FE-3

Answer 2:DI-1

Answer 3:DB-1

Answer 4:CI-1

Answer 5:The start sequence does not matter because the necessary R/3 processes are started automatically when users execute SAPGUI.

Subject: R/3 Profile Maintenance

Question 1

Given a LAN with an R/3 Central Instance and database (Node: host1, Instance Name: DVEBMGS01, SAPSID: C11), and an R/3 Dialog Instance (Node: host2), and several R/3 Frontend PC's, what is the name of the profile where the SAPDBHOST parameter is defined?

Answer 1:C11_DVEBMGS00_host1

Answer 2:The SAPDBHOST parameter is defined in the database startup profile.

Answer 3:TEMU.PFL

Answer 4:DEFAULT.PFL

Answer 5:START_DVEBMGS01_host1

Subject: R/3 Monitoring


During a system performance analysis, we have encountered a slow running system. The Workload Analysis Monitor shows the results. Based upon the information in the indicated areas, which of the following is the correct conclusion?

Answer 1:The performance problem is a specific problem only influencing certain transactions and originating from one specific transaction.

Answer 2:This problem affects the performance of all running transactions. Bad response times caused by high wait times are due to either exceeding the system's physical limits, or because an external program has claimed resources needed by the R/3 System.

Answer 3:The performance problem is a generic performance problem affecting the performance of all running transactions. The bad response times are due to a poorly configured R/3 System.

Answer 4:The performance problem is caused by slow running FI transactions, probably due to complex FI customization.

Answer 5:The performance problem is caused by high wait times due to a slow network connection between the R/3 Frontends and the R/3 application server.

Subject: R/3 Transport System

Question 1

Which operating system level program is used to transfer exported changes from an integration system into a consolidation system?

Answer 1:tp

Answer 2:RDDEXPPP

Answer 3:sapinstance

Answer 4:R3check

Answer 5:RDDIMPDP


What is the name of the parameter file used by the R/3 Transport System?

Answer 1:DEFAULT.PFL

Answer 2:TPPARAM

Answer 3:.sapconf

Answer 4:DOMAIN.CFG

Answer 5:TPPARAM.sap

Subject: R/3 System Upgrade

Question 1

All changes to SAP owned objects...Choose the answer which correctly completes the sentence.

Answer 1:must be registered with SAP Software Change Registration (SSCR).

Answer 2:can only be performed in a Development (Integration) System

Answer 3:are saved to tasks of type repair.

Answer 4:will require adjustment during future system upgrades.

Answer 5:will never require adjustment during future system upgrades.

Subject: Authorization

Question 1

Which of the following users is authorized to maintain R/3 user id parameters?

Answer 1:Only the R/3 system administrator.

Answer 2:All R/3 users having an account in the same R/3 client.

Answer 3:Only the user himself.

Answer 4:Only the R/3 system administrator and the user.

Answer 5:Only user SAP*

Subject: Background Processing

Question 1

Which R/3 System user is required to start external programs from SAP background jobs?

Answer 1:DDIC

Answer 2:SAP*

Answer 3:SAPR3

Answer 4:SAPCPIC

Answer 5:<sid>adm

Subject: Problem Recording and Handling


Given an R/3 Central Instance with all services installed on Instance ID01, and having an SAP ID of C11, what is the name of the directory where the work process trace files are written (for Windows NT replace the "/" with "\")?

Answer 1:/usr/sap/C11/DVEBMGS01/data

Answer 2:/usr/sap/C11/DVEBMGS01/log

Answer 3:/usr/sap/C11/DVEBMGS01/work

Answer 4:The trace files are written in internal database tables.

Answer 5:The trace files are written in the home directory of the database administrator user.

Subject: Remote Connection & OSS

Question 1

Which of the following functions is possible using the SAP Online Service System (OSS)?

Answer 1:Execute online searches for R/3 Notes.

Answer 2:Register problems with the R/3 Support.

Answer 3:Create your own OSS users.

Answer 4:Generate an R/3 license for your R/3 installation.

Answer 5:Apply for official Internet addresses from SAP.

Subject: Workbench Organizer & Dictionary


Which of the following is a function of the ABAP Repository?

Answer 1:Ensuring data definition consistency.

Answer 2:Providing a runtime environment for ABAP programs

Answer 3:Management of data definitions.

Answer 4:Generating SSCR Keys for software development.

Answer 5:Monitor phases of an R/3 Release upgrade.

Test Module: UNIX - Questions

Subject: R/3 Install Planning


Which SAP document provides specific information which should be used to verify that the operating system release of a customer's computer meets R/3 installation specifications?

Answer 1:R/3 Notes

Answer 2:R/3 Installation - Advanced Installation manual

Answer 3:R/3 Installation Checklist

Answer 4:R/3 Marketing brochures

Answer 5:It does not matter because the installation tools verify all installation requirements.

Subject: R/3 Installation Check

Question 1

What are the 2 types of R/3 System (SYSLOG) files?

Answer 1:Database and SAP Kernel

Answer 2:Local and central

Answer 3:ABAP and Data Dictionary

Answer 4:Warnings and Errors

Answer 5:Alert and Trace


Which of the following SAP parameters must be modified when configuring the global syslog for R/3 instances with different Instance ID numbers?

Answer 1:rslg/send_daemon/listen_port

Answer 2:rslg/send_daemon/talk_port

Answer 3:rslg/gw_service

Answer 4:rdisp/TRACE

Answer 5:rdisp/bufrefmode

Question 3

With which UNIX command can you find out if the SAP instance is running and also if the database is running?

Answer 1:With the vmstat command

Answer 2:With the ps command

Answer 3:With the ls command

Answer 4:With the jobs command

Answer 5:With the df command

Question 4

What is the appropriate action to take when receiving this SAPGUI error message?

Answer 1:Update the version of the SAPGUI program to the same version as the Dialog Instance.

Answer 2:Set the Unix TERM variable for the local login session.

Answer 3:Verify that the /etc/services entries are correct.

Answer 4:Set the Unix DISPLAY variable for the local session.

Answer 5:Verify that the message server is the same release on all R/3 hosts.

Subject: R/3 Installation on UNIX


Which of the following can be selected during an R/3 installation with R3SETUP?

Answer 1:Average number of active SAPGUI connections.

Answer 2:SAP System Number (Instance ID).

Answer 3:Application Modules to be used (FI,MM,SD...).

Answer 4:Average number of active users.

Answer 5:SAP System Identifier (SAPSID).

Question 2

Administrative users with default passwords are set up for operating system, database, and R/3 System functions when R/3 is installed. Which of the following statements is correct ?

Answer 1:The R/3 System administrator (SAP*) and the ABAP/4 Dictionary administrator (DDIC) should never be deleted or locked.

Answer 2:The operating system level users for R/3 administration and for the database must have unique passwords set.

Answer 3:The Unix user ID for all operating system users must be reserved in networked environments to avoid security violations.

Answer 4:Internal database users assume the password which was used during the initial system installation with R3SETUP.

Answer 5:Customers must be informed of all passwords before the system is handed over to them.

Question 3

Where are the global system log sender and collector processes configured?

Answer 1:In the SAP Start profile (START_<Instance>).

Answer 2:In the SAP Instance profile (<SID>_<Instance>).

Answer 3:In the SAP profile DEFAULT.PFL.

Answer 4:In the startsap script (startsap_<hostname>_<Instancenumber>).

Answer 5:In the operating system process table.

Subject: R/3 Remote Connection

Question 1

What is the command line syntax to start the saprouter with the access control, logging, and password options disabled?

Answer 1:saprouter

Answer 2:saprouter -s

Answer 3:saprouter -r

Answer 4:saprouter -startup

Answer 5:The saprouter process is automatically started as an R/3 work process when the R/3 Instance is started and should not be started at the command prompt.

Subject: R/3 Disk and Device Setup


If the R/3 Installation Checklist recommends that 5 or more physical disks be used for an installation, but that a minimum of 3 disks is OK as long as the total disk space is at least 12 GB, which of the following is true?

Answer 1:The use of 3 physical disks is suitable for a demo installation but performance may suffer, and recoverability in case of hardware failure may not be as easy as with more disks.

Answer 2:A database recovery is faster and easier when fewer physical disk devices are used.

Answer 3:There is no advantage in initially having more than the minimum number of physical disks for a production system because the R/3 database can be extended later.

Answer 4:The recommendation to use 5 or more disks is based on good marketing practices and has nothing to do with data security or performance.

Answer 5:It is a relatively quick and easy task to change an R/3 System initially installed using 3 physical disks to a configuration using 5 or more disks.

Subject: R/3 Language Import

Question 1

Which of the following statements are true concerning the R/3 Language Import procedure?

Answer 1:The profile parameter, zcsa/installed_languages, defines which languages should be imported.

Answer 2:The language import procedure supports restarts in case of program interruption.

Answer 3:The language import procedure can be restarted using transaction SM37.

Answer 4:A language which was previously installed may be imported as part of an R/3 Repository Upgrade.

Answer 5:Database storage space must be manually extended as described in the SAP installation manuals and technical notes.

Question 2

Which of the following statements are TRUE of the R/3 Language Import Supplement procedure?

Answer 1:The language supplement logic is defined in the DEFAULT.PFL profile.

Answer 2:R/3 Systems which are used as dedicated translation systems may use the language supplement procedure.

Answer 3:The language supplement procedure supports restarts in case of program interruption.

Answer 4:The language supplement procedure can be scheduled to supplement all defined languages sequentially or it may be scheduled to process selected languages a few at a time.

Answer 5:Any language may be used to supplement another language.

Subject: Copy & Install DB


Which method is recommended by SAP to use when extending a productive one system R/3 Landscape to a three system R/3 landscape?

Answer 1:It is not recommended to extend an already established R/3 System Landscape.

Answer 2:Use operating system utilities to copy all of the filesystems and raw partitions holding the R/3 software to the new systems. Rename the databases on the new hardware after the copy is finished.

Answer 3:Install the second and third systems using the standard R/3 software and overwrite the database using an offline database backup from the source system.

Answer 4:Install the second and third systems using the standard R/3 software and overwrite the database using a database export created on the source system.

Answer 5:Install the additional systems using the standard R/3 software and use the client transport utilities to create the consolidation and delivery systems on the new computers.

Test Module: ORACLE - Questions

Subject: DB Device Configuration & Management


Here is an extract from the report created by the sapdba program using the -check option.Which of the following tablespaces has approximately 12% of its space unallocated?

Answer 1:PSAPSTABD

Answer 2:PSAPDDICD

Answer 3:PSAPES40BI

Answer 4:PSAPLOADI

Answer 5:PSAPES40BD

Subject: R/3 DB Administration


What is the name of the sapdba parameter file for an Oracle database used by an R/3 Central Instance with SAP System ID C11?

Answer 1:initC11.ini

Answer 2:initC11.ora

Answer 3:initC11.sap

Answer 4:sapdba.ini

Answer 5:initC11.dba


The standard password of the Oracle user SYSTEM was changed to "newpass". What is the syntax that should be used to execute sapdba from a shell script to check and adapt the next extent size of tables and indices?

Answer 1:sapdba -next PSAP%

Answer 2:sapdba -next PSAP% system/newpass

Answer 3:sapdba -next PSAP% -u system/newpass

Answer 4:sapdba -next PSAP% -p system/newpass

Answer 5:The sapdba program cannot be run from a shell script when using the "next PSAP%" option.

Subject: Database Backup


The brbackup tool can create a database backup when the database is up and running or when it has been shutdown. During an online database backup which of the following is TRUE?

Answer 1:Users must stop entering data but may continue working using read-only transactions.

Answer 2:Users must stop working because their work would be unrecoverable in case of problems with the backup.

Answer 3:Users may continue working without interruption.

Answer 4:Power-users may continue working but data-entry users must log off.

Answer 5:Users must log off until the online backup is started but then may continue working.

Subject: Database Restore


What happens when the safe check is executed during the Check and Repair sapdba utility execution?

Answer 1:The Oracle V$- tables get updated.

Answer 2:Data from the ORacle V$- tables is analyzed and displayed for the database administrator.

Answer 3:Contents of the R/3 Syslog are displayed and the user is prompted whether the log should be zeroed out and refreshed.Answer 4:The database is shutdown and started up again to reset all logs.

Answer 5:The R/3 Syslog and the saposcol log are automatically synced and refreshed.

Test Module: R/3 Basis - Solutions

Subject: R/3 System Architecture

Question 1

Based upon the information in this R/3 System Status screen, what is the network node name where the R/3 database is installed?

Answer 1: IncorrectPSWDF694

Answer 2: CorrectPSWDF697

Answer 3: IncorrectTC4

Answer 4: IncorrectSAPMSYST

Answer 5: IncorrectIt is not possible to determine the node name based upon the information provided.

Subject: R/3 System Landscape

Question 1

Which of the following is recommended by SAP to be used for copying very large R/3 System clients?

Answer 1: IncorrectDatabase export and import.

Answer 2: IncorrectGeneric operating system utilities.

Answer 3: CorrectThe R/3 Client Copy transactions.

Answer 4: IncorrectR3SETUP

Answer 5: IncorrectSAPDBA

Subject: R/3 System Management

Question 1

When creating a logon group for Logon Load Balancing, which of the following can be specified?

Answer 1: IncorrectMaximum allowable response time per logon group

Answer 2: CorrectMaximum number of users who may be logged on to the instance.

Answer 3: CorrectName of the instance defined for the logon group.

Answer 4: IncorrectMaximum number of sessions per user.

Answer 5: IncorrectMaximum number of users who may be logged on to the logon group.


Which of the hosts in this networked SAP System diagram must have its respective R/3 component(s) started up FIRST before the other hosts can start theirs?

Answer 1: IncorrectFE-1, FE-2, or FE-3

Answer 2: IncorrectDI-1

Answer 3: CorrectDB-1

Answer 4: IncorrectCI-1

Answer 5: IncorrectThe start sequence does not matter because the necessary R/3 processes are started automatically when users execute SAPGUI.

Subject: R/3 Profile Maintenance

Question 1

Given a LAN with an R/3 Central Instance and database (Node: host1, Instance Name: DVEBMGS01, SAPSID: C11), and an R/3 Dialog Instance (Node: host2), and several R/3 Frontend PC's, what is the name of the profile where the SAPDBHOST parameter is defined?Answer 1: IncorrectC11_DVEBMGS00_host1Answer 2: IncorrectThe SAPDBHOST parameter is defined in the database startup profile.Answer 3: IncorrectTEMU.PFLAnswer 4: CorrectDEFAULT.PFLAnswer 5: IncorrectSTART_DVEBMGS01_host1

Subject: R/3 Monitoring


During a system performance analysis, we have encountered a slow running system. The Workload Analysis Monitor shows the results. Based upon the information in the indicated areas, which of the following is the correct conclusion?

Answer 1: IncorrectThe performance problem is a specific problem only influencing certain transactions and originating from one specific transaction.

Answer 2: CorrectThis problem affects the performance of all running transactions. Bad response times caused by high wait times are due to either exceeding the system's physical limits, or because an external program has claimed resources needed by the R/3 System.

Answer 3: IncorrectThe performance problem is a generic performance problem affecting the performance of all running transactions. The bad response times are due to a poorly configured R/3 System.

Answer 4: IncorrectThe performance problem is caused by slow running FI transactions, probably due to complex FI customization.

Answer 5: IncorrectThe performance problem is caused by high wait times due to a slow network connection between the R/3 Frontends and the R/3 application server.

Subject: R/3 Transport System

Question 1

Which operating system level program is used to transfer exported changes from an integration system into a consolidation system?

Answer 1: Correcttp

Answer 2: IncorrectRDDEXPPP

Answer 3: Incorrectsapinstance

Answer 4: IncorrectR3check

Answer 5: IncorrectRDDIMPDP


What is the name of the parameter file used by the R/3 Transport System?

Answer 1: IncorrectDEFAULT.PFL

Answer 2: CorrectTPPARAM

Answer 3: Incorrect.sapconf

Answer 4: CorrectDOMAIN.CFG

Answer 5: IncorrectTPPARAM.sap

Subject: R/3 System Upgrade

Question 1

All changes to SAP owned objects...Choose the answer which correctly completes the sentence.

Answer 1: Correctmust be registered with SAP Software Change Registration (SSCR).

Answer 2: Incorrectcan only be performed in a Development (Integration) System.

Answer 3: Correctare saved to tasks of type repair.

Answer 4: Correctwill require adjustment during future system upgrades.

Answer 5: Incorrectwill never require adjustment during future system upgrades.

Subject: Authorization

Question 1

Which of the following users is authorized to maintain R/3 user id parameters?

Answer 1: IncorrectOnly the R/3 system administrator.

Answer 2: IncorrectAll R/3 users having an account in the same R/3 client.

Answer 3: IncorrectOnly the user himself.

Answer 4: CorrectOnly the R/3 system administrator and the user.

Answer 5: IncorrectOnly user SAP*.

Subject: Background Processing

Question 1

Which R/3 System user is required to start external programs with SAP background jobs?

Answer 1: IncorrectDDIC

Answer 2: IncorrectSAP*

Answer 3: IncorrectSAPR3

Answer 4: CorrectSAPCPIC

Answer 5: Incorrect<sid>adm

Subject: Problem Recording and Handling


Given an R/3 Central Instance with all services installed on Instance ID01, and having an SAP ID of C11, what is the name of the directory where the work process trace files are written (for Windows NT replace the "/" with "\")?

Answer 1: Incorrect/usr/sap/C11/DVEBMGS01/data

Answer 2: Incorrect/usr/sap/C11/DVEBMGS01/log

Answer 3: Correct/usr/sap/C11/DVEBMGS01/work

Answer 4: IncorrectThe trace files are written in internal database tables.

Answer 5: IncorrectThe trace files are written in the home directory of the database administrator user.

Subject: Remote Connection & OSS

Question 1

Which of the following functions is possible using the SAP Online Service System (OSS)?

Answer 1: CorrectExecute online searches for R/3 Notes.

Answer 2: CorrectRegister problems with the R/3 Support.

Answer 3: IncorrectCreate your own OSS users

Answer 4: IncorrectGenerate an R/3 license for your R/3 installation.

Answer 5: IncorrectApply for official Internet addresses from SAP.

Subject: Workbench Organizer & Dictionary


Which of the following is a function of the ABAP Repository?

Answer 1: CorrectEnsuring that data definition consistency.

Answer 2: IncorrectProviding a runtime environment for ABAP programs

Answer 3: CorrectManagement of data definitions.

Answer 4: IncorrectGenerating SSCR Keys for software development.

Answer 5: IncorrectMonitor phases of an R/3 Release upgrade.

Test Module: UNIX - Solutions

Subject: R/3 Install Planning


Which SAP document provides specific information which should be used to verify that the operating system release of a customer's computer meets R/3 installation specifications?

Answer 1: IncorrectR/3 Notes

Answer 2: IncorrectR/3 Installation - Advanced Installation manual

Answer 3: CorrectR/3 Installation Checklist

Answer 4: IncorrectR/3 Marketing brochures

Answer 5: IncorrectIt does not matter because the installation tools verify all installation requirements.

Subject: R/3 Installation Check

Question 1

What are the 2 types of R/3 System (SYSLOG) files?

Answer 1:IncorrectDatabase and SAP Kernel

Answer 2: CorrectLocal and central

Answer 3: IncorrectABAP and Data Dictionary

Answer 4: IncorrectWarnings and Errors

Answer 5: IncorrectAlert and Trace


Which of the following SAP parameters must be modified when configuring the global syslog for R/3 instances with different Instance ID numbers?

Answer 1: Correctrslg/send_daemon/listen_port

Answer 2: Correctrslg/send_daemon/talk_port

Answer 3: Incorrectrslg/gw_service

Answer 4: Incorrectrdisp/TRACE

Answer 5: Incorrectrdisp/bufrefmode

Question 3

With which UNIX command can you find out if the SAP instance is running and also if the database is running?

Answer 1: IncorrectWith the vmstat command

Answer 2: CorrectWith the ps command

Answer 3: IncorrectWith the ls command

Answer 4: IncorrectWith the jobs command

Answer 5: IncorrectWith the df command

Question 4

What is the appropriate action to take when receiving this SAPGUI error message?

Answer 1: IncorrectUpdate the version of the SAPGUI program to the same version as the Dialog Instance.

Answer 2: IncorrectSet the Unix TERM variable for the local login session.

Answer 3: IncorrectVerify that the /etc/services entries are correct.

Answer 4: CorrectSet the Unix DISPLAY variable for the local session.

Answer 5: IncorrectVerify that the message server is the same release on all R/3 hosts.

Subject: R/3 Installation on UNIX


Which of the following can be selected during an R/3 installation with R3SETUP?

Answer 1: IncorrectAverage number of active SAPGUI connections.

Answer 2: CorrectSAP System Number (Instance ID).

Answer 3: IncorrectApplication Modules to be used (FI,MM,SD...).

Answer 4: IncorrectAverage number of active users.

Answer 5: CorrectSAP System Identifier (SAPSID).

Question 2

Administrative users with default passwords are set up for operating system, database, and R/3 System functions when R/3 is installed. Which of the following statements is correct ?

Answer 1: IncorrectThe R/3 System administrator (SAP*) and the ABAP/4 Dictionary administrator (DDIC) should never be deleted or locked.

Answer 2: IncorrectThe operating system level users for R/3 administration and for the database must have unique passwords set.

Answer 3: IncorrectThe Unix user ID for all operating system users must be reserved in networked environments to avoid security violations.

Answer 4: CorrectInternal database users assume the password which was used during the initial system installation with R3SETUP.

Answer 5: CorrectCustomers must be informed of all passwords before the system is handed over to them.

Question 3

Where are the global system log sender and collector processes configured?

Answer 1: CorrectIn the SAP Start profile (START_<Instance>).

Answer 2: IncorrectIn the SAP Instance profile (<SID>_<Instance>).

Answer 3: IncorrectIn the SAP profile DEFAULT.PFL.

Answer 4: IncorrectIn the startsap script (startsap_<hostname>_<Instancenumber>).

Answer 5: IncorrectIn the operating system process table.

Subject: R/3 Remote Connection

Question 1

What is the command line syntax to start the saprouter with the access control, logging, and password options disabled?

Answer 1: Incorrectsaprouter

Answer 2: Incorrectsaprouter -s

Answer 3: Correctsaprouter -r

Answer 4: Incorrectsaprouter -startup

Answer 5: IncorrectThe saprouter process is automatically started as an R/3 work process when the R/3 Instance is started and should not be started at the command prompt.

Subject: R/3 Disk and Device Setup


If the R/3 Installation Checklist recommends that 5 or more physical disks be used for an installation, but that a minimum of 3 disks is OK, as long as the total disk space is at least 12 GB, which of the following is true?

Answer 1: CorrectThe use of 3 physical disks is suitable for a demo installation, but performance may suffer and recoverability in case of hardware failure may not be as easy as with more disks.

Answer 2: IncorrectA database recovery is faster and easier when fewer physical disk devices are used.

Answer 3: IncorrectThere is no advantage in initially having more than the minimum number of physical disks for a production system, because the R/3 database can be extended later.

Answer 4: IncorrectThe recommendation to use 5 or more disks is based on good marketing practices and has nothing to do with data security or performance.

Answer 5: IncorrectIt is a relatively quick and easy task to change an R/3 System initially installed using 3 physical disks to a configuration using 5 or more disks.

Subject: R/3 Language Import

Question 1

Which of the following statements is true concerning the R/3 Language Import procedure?

Answer 1: IncorrectThe profile parameter, zcsa/installed_languages, defines which languages should be imported.

Answer 2: CorrectThe language import procedure supports restarts in case of program interruption.

Answer 3: IncorrectThe language import procedure can be restarted using transaction SM37.

Answer 4: IncorrectA language which was previously installed may be imported as part of an R/3 Repository Upgrade.

Answer 5: CorrectDatabase storage space must be manually extended as described in the SAP installation manuals and technical notes.

Question 2

Which of the following statements is TRUE of the R/3 Language Import Supplement procedure?

Answer 1: IncorrectThe language supplement logic is defined in the DEFAULT.PFL profile.

Answer 2: IncorrectR/3 Systems which are used as dedicated translation systems may use the language supplement procedure.

Answer 3: CorrectThe language supplement procedure supports restarts in case of program interruption.

Answer 4: CorrectThe language supplement procedure can be scheduled to supplement all defined languages sequentially, or it may be scheduled to process selected languages a few at a time.

Answer 5: IncorrectAny language may be used to supplement another language.

Subject: Copy & Install DB


Which method is recommended by SAP to use when extending a productive one system R/3 Landscape to a three system R/3 landscape?

Answer 1: IncorrectIt is not recommended to extend an already established R/3 System Landscape.

Answer 2: IncorrectUse operating system utilities to copy all of the filesystems and raw partitions holding the R/3 software to the new systems. Rename the databases on the new hardware after the copy is finished.

Answer 3: IncorrectInstall the second and third systems using the standard R/3 software and overwrite the database using an offline database backup from the source system.

Answer 4: IncorrectInstall the second and third systems using the standard R/3 software and overwrite the database using a database export created on the source system.

Answer 5: CorrectInstall the additional systems using the standard R/3 software and use the client transport utilities to create the consolidation and delivery systems on the new computers.

Test Module: ORACLE - Solutions

Subject: DB Device Configuration & Management


Here is an extract from the report created by the sapdba program using the -check option.Which of the following tablespaces has approximately 12% of its space unallocated?

Answer 1: IncorrectPSAPSTABD

Answer 2: IncorrectPSAPDDICD

Answer 3: IncorrectPSAPES40BI

Answer 4: IncorrectPSAPLOADI

Answer 5: CorrectPSAPES40BD

Subject: R/3 DB Administration


What is the name of the sapdba parameter file for an Oracle database used by an R/3 Central Instance with SAP System ID C11?

Answer 1: IncorrectinitC11.ini

Answer 2: IncorrectinitC11.ora

Answer 3: IncorrectinitC11.sap

Answer 4: Incorrectsapdba.ini

Answer 5: CorrectinitC11.dba


The standard password of the Oracle user SYSTEM was changed to "newpass". What is the syntax that should be used to execute sapdba from a shell script to check and adapt the next extent size of tables and indices?

Answer 1: Incorrectsapdba -next PSAP%

Answer 2: Incorrectsapdba -next PSAP% system/newpass

Answer 3: Correctsapdba -next PSAP% -u system/newpass

Answer 4: Incorrectsapdba -next PSAP% -p system/newpass

Answer 5: IncorrectThe sapdba program cannot be run from a shell script when using the "next PSAP%" option.

Subject: Database Backup


The brbackup tool can create a database backup when the database is up and running or when it has been shutdown. During an online database backup which of the following is TRUE?

Answer 1: Incorrect

Users must stop entering data but may continue working using read-only transactions.

Answer 2: IncorrectUsers must stop working because their work would be unrecoverable in case of problems with the backup.

Answer 3: CorrectUsers may continue working without interruption.

Answer 4: IncorrectPower-users may continue working but data-entry users must log off.

Answer 5: IncorrectUsers must log off until the online backup is started but then may continue working.

Subject: Database Restore


What happens when the safe check is executed during the Check and Repair sapdba utility execution?

Answer 1: CorrectThe Oracle V$- tables get updated.Answer 2: IncorrectData from the ORacle V$- tables is analyzed and displayed for the database administrator.

Answer 3: IncorrectContents of the R/3 Syslog are displayed and the user is prompted whether the log should be zeroed out and refreshed.

Answer 4: IncorrectThe database is shutdown and started up again to reset all logs.

Answer 5: IncorrectThe R/3 Syslog and the saposcol log are automatically synced and refreshed.

TADM51


K. BeforeL. AfterM. SimultaneouslyN. The priority and sequence of database writes and transaction log writes is controlled by the parameter

"dblg_after" in the ORACLE initialization file.O. Randomly, sometimes before, sometimes after.

2 - What is the primary function of the $ORACLE HOME/saparch directory?Click on the button next to the right answer.

F. The saparch directory is a work area for the R/3 database utilities.G. The saparch directory is a work area for the R/3 Instance tasks.

H. The saparch directory is used as the holding area for online database backups instead of writing them to tape.

I. The saparch directory holds the archived database log files.J. The saparch directory contains the current database transaction log files.

3 - Which customer specific specific files does sapdba save during an offline backup to insure that the Oracle database could be restored to a consistent state in case of problems?Click on the button next to the right answer.

F. The Oracle executables files.G. The Oracle database transaction log files and archived log files.H. The tablespace data files, database transaction log files, and the database control file.I. The database archived log files and R/3 Syslog file.J. The database transaction log files and the R/3 transport structures.


K. The Oracle executables, database parameter file, and the tablespace data files.L. The Oracle online redo log files and the database control file.M. The archived log files, database control file and the Oracle executables.N. The tablespace data files, database control file, and all database redo logs written during the online

backup.O. The tablespace data files, database control file, and the database parameter file.


K. The sapbackup directory is used for database backups which are written to disk.L. The sapbackup directory is a work area for the R/3 Instance tasks.M. The sapbackup directory is the temporary holding area for the database transaction logs (redo logs) before

they are automatically written to tape.N. The sapbackup directory holds the archived database log files.O. The sapbackup directory is used by the R/3 database utilities during database reorganizations.


K. initC11.iniL. initC11.oraM. initC11.sapN. sapdba.iniO. initC11.dba

7 - When using a tape device that supports hardware compression which of the following statements is true ?Note: There is more than one right answer! Click on the buttons next to the right answers.

F. The tape_address and tape_address rew init<SID>.sap parameters are automatically calculated based upon the value of the "compression" parameter.

G. Drivers for hardware compression must be specified for the tape_address and tape_address rew parameters in the init<SID>.sap file.

H. The compression ratio is calculated using "brbackup -k only" immediately after installation and should be repeated at least once a month to update compression ratios.

I. The compression ratio should be calculated using "brbackup -k only" immediately after installation and never needs to be repeated.

J. The "compression" parameter should be set to "hardware" in the init<SID>.sap file.

8 - Sapdba and the Computer Center Management System (CCMS) use operating system level programs for certain database administration tasks. Which program would be called by CCMS for backing up the data files for the PSAPBTABD and PSAPBTABI tablespaces?Click on the button next to the right answer.

F. BrarchiveG. BrconnectH. sapdba –bI. brbackupJ. backoffl

9 - What are the 3 different Oracle database startup modes?Click on the button next to the right answer.

F. Warm, cold, maintenanceG. Mount, nomount, openH. Online, offline, utilityI. Level 1, level 2, level 3J. Normal, restrict, utility

10 - What are the 3 different Oracle database shutdown modes?Click on the button next to the right answer.

F. Warm, cold, maintenanceG. Level 1, level 2, level 3H. Normal, immediate, abortI. Regular, active, passiveJ. Standard, now, kill

11 - What is the primary purpose of the $ORACLE_HOME/sapreorg directory (Windows NT: $ORACLE_HOME\sapreorg)?Click on the button next to the right answer.

F. The sapreorg directory is a work area for the R/3 database utilities.G. The sapreorg directory is a work area for the R/3 Dialog Instance Tasks.H. The sapreorg directory is used as the holding area for online database backups instead of writing them to tape.I. The sapreorg directory holds the database transaction log files.J. The sapreorg directory contains the archived database log files.

12 - Based upon the information in the initial sapdba program menu, what is the name of the parameter file used by Oracle when the database is started?The name of the Oracle parameter file is:spfilesid.ora, initsid.ora Type the correct file name in the field provided.


K. OPS$connect authorization allows an operating system user to connect to the database without being prompted for a password.

L. OPS$connect is an Oracle command enabling whoever executes it to administer the database without using sqldba.

M. OPS$connect is used in Oracle Parallel Server installations to enable remote database connections over a LAN.

N. OPS$connect authorization is required of all database users and is required for connection to the database.O. OPS$connect enables the R/3 System saposcol process to communicate and exchange data with the

database.

14 - What is the name of the alert log file for an Oracle database using a system identifier (SID) of C11?Click on the button next to the right answer.

F. ora_log_C11.logG. ora_log_C11.trcH. alert_C11.logI. alert_C11.trcJ. orasrv.log

15 - What happens if a table wants to allocate another extent but there is not enough contiguous free space in the tablespace?Click on the button next to the right answer.

F. The extent is allocated in another tablespace.G. The Oracle error message ORA-1653 is sent to the Syslog file and to the ABAP/4 short dump.H. The extent is distributed across the free space that is available.I. Oracle dynamically reorganizes the tablespace to make all available space contiguous.J. The database switches into maintenance mode and sends a system message to the database administrator.


K. The tablespace should be moved to a faster disk so that Oracle can find the extents quicker.L. The tablespace size should be increased by adding 1 or more datafiles.M. This is an Oracle internal error message which should be registered with Oracle immediately.N. The database must be shutdown immediately to avoid damage.O. The affected table should be dropped to avoid similar problems in the future.

17 - Under which circumstances does a table/index have to be reorganized?Click on the button next to the right answer.

F. If the extents belonging to the table/index are distributed across several data files.G. If a log switch occurs before a database commit is completed.H. If the tablespace overflows during a redo log file switch.I. If an archiver stuck situation occurs during a write to the table/index.J. If the table/index reaches the upper limit for the MAXEXTENTS parameter value when attempting to

allocate another extent.


K. The Oracle parameter file, init<SID>.ora.L. Each tablespace data file contains this data for the whole database.M. The Oracle control file, cntrl<SID>.dbf.N. The SGA definition file, sgadef<SID>.def.O. The sapdba parameter file, init<SID>.dba.

19 - An Instance error occurs when 1 or more Oracle background processes become corrupted. What actions should the database administrator take to correct the problem?Click on the button next to the right answer.

F. This is a serious error. Call the Oracle hotline.G. Shutdown the operating system and reinstall the Oracle software.

H. Shutdown abort and startup open. The SMON process will use the current redo log files and checkpoint information from the control files to execute an automatic instance recovery upon database startup.

I. Shutdown the operating system and turn all hardware off. After the hardware cools off start everything up again and execute Orainst using the repair option.

J. Restore all missing files, apply the offline redo logs, update the control files, and execute the startup open command.

20 - Which files must be restored from tape to allow a full database restore and recovery ?Click on the button next to the right answer.

F. Database control file, tablespace data files, and the database alert log.G. Tablespace data files, database control file, and all archived database transaction logs created since

the last full backup.H. $ORACLE_HOME, Oracle parameter file, tablespace data files.I. Database control file, tablespace data files, R/3 Syslog, R/3 Transport directory.J. Oracle parameter file, tablespace data files, and the Oracle control file.

21 - The R/3 System Oracle database has 4 online redo logs, also known as database transaction logs. Each online redo log has a mirrored copy. What is the effect of a log file switch?Click on the button next to the right answer.

K. The current online redo log gets copied to its mirrored copy, upon completion the next online redo log becomes open for writing.

L. The database alternates between writing to the online and offline redo log files.M. The database switches between writing to the original redo log files and the mirrored redo log files.N. The current R/3 Syslog file gets copied to the saparch directory and a new Syslog file is created.O. The current online redo log gets closed and the next online redo log gets opened for writing. The

ARCH process gets triggered to begin backing up the recently closed redo log.


K. Users may only read data and may not enter data until after the backup is done.L. Database transaction logs (online redo logs) are not written during online backups.M. The tablespace data files and control file comprise the complete online backup and are all that is necessary

for restoring the database to a consistent status.N. The database must be running in archivelog mode.O. Online database backups are not supported by Oracle.

23 - Given Oracle database with system ID C11. If tablespace PSAPBTABD has been extended 200 MB by adding another datafile which of the following statements is true?Click on the button next to the right answer.

F. In the event of a full database restore the new tablespace data file will be automatically created based upon information in the initC11.ora file.

G. All data files for PSAPBTABD should be backed up along with the database control file to maintain database recoverability.

H. The database should be shutdown and started up again to register the existence of the new file in the Oracle internal system tables.

I. The data files for PSAPBTABD, the control file, and the redo logs must be backed up to maintain database recoverability.

J. An R3INST database copy should be run to create a clean copy of the complete database.

24 - What is the highest priority when planning the distribution of the database transaction logs, mirrored transaction logs, archived transaction logs, and tablespace data files over multiple logical device groups?Click on the button next to the right answer.

F. Better performance through more hardware.G. More flexibility in case of hardware failure.

H. Easier database backups and quicker restores.I. Higher data security and easier administration.J. To make the system physically more modular for transport reasons.


K. db_block_buffersL. db_block_sizeM. db_nameN. controlfilesO. shared_pool_size

26 - Which of the following configurations would have the slightest impact upon data security and/or performance?Click on the button next to the right answer.

F. Operating system swap and Oracle tablespace data files installed on the same physical disk(s).G. Operating system swap and SAP kernel (executable files) installed on the same physical disk(s).H. Operating system swap and Oracle database transaction logs (redo logs) installed on the same disk(s).I. Operating system swap and the /usr/sap directory on the same physical disk(s).J. Oracle database archived log files (offline redo logs) accessed over a shared (or NFS) directory connection.

27 - The physical separation of database logs from their mirror copies means?Click on the button next to the right answer.

F. Using physically separate partitions of a physical disk.G. Using physically separate disks.H. Using physically separate disks in the same logical device group.I. Using generic database utilities to split the flow of data between randomly chosen operating system

directories.J. Use of database specific utilities to fork log backups to 2 physically separate backup media.


K. log_archive_destL. db_block_sizeM. rollback_segmentsN. shared_pool_sizeO. db_block_buffers

29. brbackup tool can create a database backup when the database is up and running or when it has been shutdown. During an online database backup which of the following is TRUE? Click on the button next to the right answer.

A. Users must stop entering data but may continue working using read-only transactions.B. Users must stop working because their work would be unrecoverable in case of problems with the backup.C.Users may continue working without interruption.D.Power-users may continue working but data-entry users must log off.

E.Users must log off until the online backup is started but then may continue working

30. Which of the following statements are correct in regard to using a single run of BRBACKUP to save both the database files and the offline redo log files?Note! More than one answer is correct. Please click on the buttons next to the correct answers.K. BRARCHIVE is started immediately after the database backup is complete: no further intervention

by the database administrator is necessary.

L. This technique can only be used for offline database backups, not online backups.M. The database backup and the backup of the offline redo log files must fit on one tape because

changing tapes is not supported.N. You can backup the database using multiple tape devices in parallel.O. The tapes used must have been initialized by BRBACKUP.

31. What happens during the startup of an Oracle database?Note! More than one answer is correct. Please click on the buttons next to the correct answers.K. The SGA is created in shared memory according to the parameter settings in the configuration file

init<SID>.ora.L. The Oracle background and shadow processes are created.M. In the mount phase, all copies of the control file are opened.N. If necessary, Oracle automatically performs an instance recovery.O. As the last step, the online redo log files are cleared and the data files are opened.

32. What happens during the shutdown of an Oracle database?Note! More than one answer is correct. Please click on the buttons next to the correct answers.K. When you shutdown the database with the NORMAL option, the database system disconnects all users

before shutting down the database.L. When you shutdown the database with the NORMAL or IMMEDIATE option, the database system

writes a checkpoint before shutting down the database.M. When you shutdown the database with the ABORT or IMMEDIATE option, open transactions are rolled back

before the database is shut down.N. When you shut down the database with the ABORT option, the R/3 system is shut down, too.O. Shutting down the database with the ABORT option always requires an instance recovery at the next

database startup.


Note! More than one answer is correct. Please click on the buttons next to the correct answers.L. No statistics are created for R/3 pool and cluster tables.M. Statistics are created for all transparent tables that have no statistics.N. The table DBSTATC can be used to trigger an exact computation of the statistics of specific tables.O. The update for table statistics refreshes all transparent tables.P. The table DBSTATC can be used to detect which table statistics need to be refreshed.

34. What happens if a table wants to allocate another extent but there is not enough contiguous free space in the tablespace? Click on the button next to the right answer.

G. Please click on the button next to the correct answer.H. The extent is allocated in another tablespace.I. The extent is distributed across the free space that is available.J. The Oracle error message ORA 1653 is sent to the file SYSLOG and to the ABAP short dump.K. Oracle dynamically reorganizes the tablespace to make all available space contiguous.L. The database switches into maintenance mode and sends a system message to the database

administrator.


Note! More than one answer is correct. Please click on the buttons next to the correct answers.K. The tablespace should be reorganized.L. The tablespace size should be increased by adding a new data file.M. The table should be reorganized.N. The storage parameter MAXEXTENTS must be increased.O. After the cause of the error has been removed, the R/3 update task must be reactivated.


K. Checking that the CBO statistics are refreshed once a week according to the strategy recommended by SAP.

L. Checking that the archive directory contains enough free space.M. Checking the data buffer quality.N. Checking the shared cursor cache for expensive SQL statements.O. Checking for tables with more than 100 extents.

37. ___________ is used as default user when you can an SAP tool for Oracle administration.Click on the button next to the right answer.

F. SYSTEMG. SYSDBAH. SYSOPERI. SAP<SCHEMA-ID>J. SIDADM

38. Name the standard Database users created in Oracle.Note! More than one answer is correct. Please click on the buttons next to the correct answers

F. SIDADMG. ORASIDH. SYSI. SAP<SCHEMA-ID>J. SYSTEM


L. SQL> ALTER USERM. SAP tool BRCONNECTN. SQL > ALTER USERO. SQLPLUS>CHANGE PASSWORDP. SAP tool BRUSER

40. The Oracle tool to test the connection to the database with SID C11 ON HOST twdf0505 is Click on the button next to the right answer.

F. TNSLISTENERG. lsnrctl startH. tnspingC11I. CONNECTJ. BRCONNECT

41. Your daily backups are performed with automatic tape selection, no volume for backup is specified. Which tapes will be accepted for backup (assuming the tape lock period is expired in all cases.)Note! More than one answer is correct. Please click on the buttons next to the correct answers

J. any labeled tapeK. the tape labeled with the volume name you got from DB13, Goto Tapes needed.L. A tape labeled with volume name scratchM. Any unlabeled tape.

42. The BR*TOOLS profile init<DBSID>.sap can be edited by;Click on the button next to the right answer.

F. BRBACKUPG. BRARCHIVEH. BRTOOLSI. Operating system editor.J. None of the above.

43, To perform a complete database reset, you need one of the following backups.Note! More than one answer is correct. Please click on the buttons next to the correct answers

E. complete offline backupF. complete online backupG. consistent online backupH. backup of offline redo log files.

Here are workload analysis questions:

1. Maximum number of sessions allowed are defined by Max_alt_modeAnd maximum sessions allowed are 16, default is 6

2. What details can you get from SM50 ? A long list was given and you have to choose the correct ones. Refer page 30 to 34. You can get details like:

Report, User, Cl, Table, action like Direct read, Load program, sequential read etc. Remember these well as many of us got this question

3. screen shot was given and some questions: Page number 37 Know difference between CPU utilization and Average CPU load, 1 , 5 and 15 minutes. I had this straight

question4. Read Page 71 well. You may get two questions from that. One on integrated ITS properties and one sure will be on

either Itsp/enable =1 or /sap/bc/gui/sap/its/webgui

5. What does SAP buffers contain? – page 80

a. Aaaaaab. Global contents for usersc. Global contents for work processd. Programs e. Buffered table contents

6. What does Extended memory contain? Page 817. Reasons for using extended memory

a. Fast context switches are needed in SAP, as many users share few work processesb. Extended memory id accessed through pointers, therefore fast context switches are possiblec. Sap transactions consists usually of more than one step/screend. Extended memory area is generally very huge. So data can be placed there permanently

8. Memory allocation sequence for dialog work processesa. Roll memory up to roll first-extended memory – remaining roll area, heap memory – everybody got

this question- read page 97

9. One question based on Hardware sizinga. Read Hardware Analysis Roadmaps given on page no 119,120 and 121 well, you can get one questionb. And also last paragraph of page 126

10. One screen shot and to find out if the SQL statement is expensive.a. Screen shot similar to page 146 and it was easy to find out that the statement was expensive as number of

buffer gets was too high

11. One question on difference between Compute statistic and estimate statisticsa. Page number 174 top paragraph.

12. Table with frequently changed data should be placed in buffer.a. TRUE / FALSE

13. Following statements bypass table buffering:a. All native SQL statementsb. All OPEN SQL statementsc. SELECE…..BYPASSING BUFFERd. SELECT for UPDATE

14. Read restrictions and Recommendations for table buffering. You will get one question from ita. Page 195

15. RFC + CPIC time consists ofa. CPIC COMMUNICATION TIMEb. Wait , roll in and load timec. Roll out timed. Roll wait timee. Roll in timef. Processing time

16. Which of the following are available as SAP library:a. Compressed HTMLb. PlainHtmlHttpc. PlainHtmlFiled. DynamicHelpe. StatisHelpf. Sap Helpkitg. CompiledHtml

17. Name and location of archived file. Name time is given and you have to tell the exact file name- page 273 figure 181 , last box time 18.11.2004, 12.00 for example

18. Question 2 of page number 29319. I got Three questions from chapter 13. and they were exactly same as given on page 473. So read it carefully.

All the best….!!!!


76) What is SAP Instance? (Single Choice)a. Group of Database that make a system runnableb. Group of SAP instances that make a system runnablec. Group of Services that make a system runnabled. Group of O/S level Files that make a system runnable


78) Spool Request is created by which Work Process? (Single Choice)a. Spool Work Processb. Dispatcherc. Message Server

d. Dialog Work Process79) What is the Profile Parameter name used to set the Trace Level in SAP system? (Single Choice)

a. rdisp/trace_levelb. rdisp/tracelevelc. rdisp/LEVELd. rdisp/TRACE










89) The standard System Landscape recommended by SAP is: (Single Choice)a. DEV, QAS & PRD systems on one Serverb. DEV & QAS on one server and PRD on another serverc. DEV, QAS & PRD on separate serverd. DEV on one server and QAS & PRD on one server

90) Access Method is: (Single Choice)a. Connection between Dialog & Spool Work Processb. Connection between OS Spool and the Actual Printerc. Connection between Spool Work Process and OS Spoold. Connection between Spool Request & Output Request


92) Spool Data is stored in which table: (Single Choice)a. TSP01b. TSP03

c. TST03d. TSP02









39. All customizing requires customizing request40. Log file created by Sapinst41. Some features of SAPinst remote installtion42. Use of sapevt and sapxpg43. Port No. of Message server, Printer port44. There was something about the port no. 310045. Component of Dialog response time46. Component of GUI response time47. Relationship between CPU Time and processing time. Like which one should be more.48. Memory requirement for per user concurrent connection49. Percentage of memory and CPU utilized by Database50. There was one question on CUA51. There was at least 5 true and false on LDAP and director services52. Enhancement of security feature of SAP like SNC, SAPRouter, SAPlogon, 53. There were Four True and false on Logon group Load balancing54. During Logon group Load balancing, server process from which all servers can process the request of a user .55. User from a logon group1 can logon to the logon group2 ?56. There were 10 true and false on Track Management (Java Book Chapter 7)

57. There were at least 10 true and false on CBS, CMS, DTR like what all authorization are there with developer and administrator

58. What is the difference between Central administration and local administration of these CBS DTR CMS component

59. What is the function of SLD-(1 complete question)60. what is the tool for configuring ITS Parameters- simple one true and false61. One screen shot about Buffer gets62. Database: Around 20 questions from Milan’s TDM 51 questions Paper (Go through it carefully)63. Which is better tuning of SQL Statements or creating a index of Tables.64. Around 5 True and false on optimizer 65. What enqueue/dequeue does.66. after copying SAP* & DDIC should these users to be deleted for security purpose67. There were 6-7 questions between the relationship Role, Authorization Profile, Authorization.68. Around 5 questions on the Enterpise Protal Roles, 69. How EP role, Workset, Iviews, Pages are connected70. Question on rdisp/buffrefmode=sendon,exeauto and also about bufreftime71. question about ztta/roll_first, ztta/roll_memory, heap memory and extended memory72. What Is the content of Directory BRBACKUP73. Can we change the Rollback tablespace into UNDO Tablespace if yes then how?74. Communication between SAP GUI and SAP Application server.75. Is installtion of SAPInst is necessary before then installation of other JAVA Central or Dialog Instance.76. Which all is based on Netweaver technology

Like SAP all, SAP Business One, SAP EP, ………

(In total chapter 7 java book had at least 25 true and false)

Rest of the questions I will put by Monday.

Ashish SurekaE-Mail: [email protected]: 09811422943

No of questionsTADM12 80 qtnsMysap technology 14 System Administration 22 Advanced System admin 3Software Logistics 30 Workload Analysis 10 Installation requirements 1

TADM51 40 qtnsTroubleshooting 7Administration 7Performance Optimization 2Restore&recovery 6Device Config 9Backup 9

59. Parameter rdisp/mshost found in which profilea)defaultb)start profilec)Central instance –instance profilec)Application Instance – instance profile

60. Parameter rdisp/vbname found in which profilea)defaultb)start profile

mailto:[email protected]

c)Central instance – instance profilec)Application Instance – instance profile

61. One screen dump of sytem status . find the Database host name?62. Performance optimization

SQL statement given –screen dump of ST04 detail analysis SQL request& ST04 main screen dump- Single choice onlyTo find SQL statement is expensive or nota)buffer gets > 5% Total Reads so Statement is expensiveb)buffer gets > 5% Physical Reads so Statement is expensivec)Statement is not expensived)Very high buffer gets so statement is expensivee)High no of execution so statement is expensive

63. Program ZZSLOW is there and it access ZZTABLE .And want to improve the performance(multiple choice )a) create an index on ZZTABLE and this is preferred over option of tuning SQL statementb) Creating an index would definitely improve the performancec)Tuning the SQL statement would solve the performance and is preferred over Index Creationd)Optimizer may choose wrong index after creation of the index

64. One screen dump of update termination .65. Sequence of Updates V1 & V2

a) both occur independentlyb) first V1 and then v2c)both simultaneously

66. How many minimum V1 and V2 processes should be there?If V1 process is only there and there are not V2 process then will V1 process will handle V2 updates as well ?? True/False

67. Which of the foll. Traces can be started without restarting SAP systema)Buffer Traceb)SYSLOG Tracec) Database Traced)Dispatcher Tracee)Authorization

68. Analyse problem of system startup. Before anyone could login system stops . Check using(multiple choice)A)check sm21b)/usr/sap/log directoryc)analyse database error log in detailsd)check files in \usr\sap\<instance>instance_no\work foldere)check files in sapbackup folder

69. Sapdba –check is used to (multiple choice)a) check & displays the status of all datafiles along with complete path nameb)lists free space usage of index & tablesc)check for consistency of databased)check for failed brbackup & brarchive backuope) check for values of active database parameters

70. Update optimizer statistics jobs does … (multiple choice)a) Not update statistics of pool and cluster tablesb)update statistics of all transparent tables.C) update statistics of all transparent tables who doesn’t have any staticticsD) Check DBSTATCO for updation of selected tablesE) updates only statictics for DBSTATCO

71. One screen dump of sapdba…Archive stuck situation is possible

72. One screen dump of backup failuretrying to take offline backup while R/3 is on

73. One screen dump on TIME_LIMIT_EXCEED explanations and some questions.74. What of the foll. Components are in mysap technology

a) SAPGUIb)mysap database

c) ITSd)SAPDBe)

75. Can Wgate and Webserver be on different boxes.76. From where can ITS be adminstrerd -multiple choice

a) from within SAP systemB) from web serverc) from ITS admin instance

77. Which of the following files are required for transport in to QAS systema)transport.pfgb)DOMAIN_DEV.cfgc)TP_DOMAIN_<SID>.pfld)tpimport.pfg

78. Which is the sapbda & brarchive parameter file79. Files Required to do full database & recovery80. File backed up during online backup81. File backup up during offline backup82. Questions on RFC+CPIC time & Roll Wait Time83. Uses of solution manager84. Sapdba supports following (multiple choice)

a)2 step backup, first disk then to tapeb)Replication databasec)

85. Enque table is stored in (single choice)a) Table Tlock in databaseb)In Central instance at file level c) in shared memory of the Central instanced)In shared memory of each SAP instance

86. Enque/deque is related toa) lock & unlocking at Database levelb)Lock & unlock of SAP transactionsc)

87. Locking process of SAP transactions carried out bya) Dialog processb)enque processc)Message server process

88. A communication is to be done between 2 systems, such that none should use anonymous logon for misuse to do remote logon to target system (multiple choice)a) if you do not give RFC target system,system no etc. then a default Logon is performed on to 000/own system with user SAPCPIC. b)To create a communication user in su01 and specify it in target destination c)to keep logon details blank so that each user has to specify the detials every time a connection is made

89. Which process first connects to the database ?a) Dispatcherb) Message serverc)Work processd) SAPGUIe)Gateway

90. What is the startup sequence of the SAP system?(multiple choice)a)Database ,gateway ,dispatcherb)Dispatcher ,gateway ,databasec)Database , dispatcher ,gatewayd)etc.. etc…

91. SCU0 along with SM30 can be used to (multiple choice)a) compare clients within same systemb)compare different clients within different systemsc)Can be used to adjust customizing alongwith SM30d)Can be used to comapare transaction tables

92. User in 000 used to logon to a newly installed systema)sap* ,passb)sap*,19920706c)ddic,06071992d)ddic,19920706c)system/pass

93. Password of SAP Dictionary usera)DDIC,06071992b)SAP*,passc)DDIC,19920706d)SAP*,06071992

94. User/Password in newly created clienta)DDIC,06071992b)SAP*,passc)DDIC,19920706d)SAP*,06071992

95. With OPS$connect mechanisma)OS user need not enter the password during database connection (T/F)b)SAPDBA always uses ops$connect mechanism (T/F)c)d)

96. At then end of prepare phase which log file is createda)R3up.logb)prepare.logc)Checks.logd)upgrade.log

97. Allocation sequence of DIA work processa)rollfirst,heap memory until exhausted,remaining of roll area,then Extended memoryb)rollfirst,Extended memory until quota reached,remaining of Roll area, then Heap memoryc)

98. 3-4 Questions on Device configuration …..( swap space,online logs,sapdata files on RAID5 or RAID1., on same disks,.. etc)

99. To check & avoid block corruptiona) Use RMAN level 0 backup with SAP tools for backupb)brbackup and brarchive always check for coruptionc)use –w use_dbv option with brbackupd)oracle automatically checks for block corruption

100. How to create additional Sap service marketplace users (single choice)a)one user Sapadm always there for every customer b)At customer place the user with Administrator rights can create additional usersc)Create an oss message for creating additional usersd)has to check license& contract between SAP & customer

101. Buffering for a frequently updated table should be (single choice)a)single record bufferedb)generic bufferedc)No bufferingc)Full buffering

102. For buffer synchronisationa)In central system only way is to make bufrefmode=sendon/exeautob)In central instance and all dialog instance it should be bufrefmode=sendoff/exeautoc) In central system it should be bufrefmode=sendoff/exeautod)In central system and all dialog system in exceptional conditions may be set as bufrefmode=sendoff/exeauto

103. One screen dump on Load average of ST06 screen (Single Choice)a)Load average is the Average CPU utilisation of the serverb)No. of CPU processes waiting in front of the CPUc)d)

104. Client copya)Remote copy creates huge file in operating system level in target systems (T/F)b)Client copies can be done within same system(T/F)c)Remote Client copy can be done using parallel processes (T/F)d)

105. From external programs which process is used to trigger an event within an SAP system(Single Choice)a)sapxpgb)gwrdc)dpmond)sapevte)disp+work.exe

106. From SAP system which process is used to start external program & external commands (Single Choice)a)sapxpgb)gwrdc)dpmond)sapevte)disp+work.exe

107. How many spool work process can be configured (Single Choice)a) one per sap instanceb)one per SAP systemc) more than one per SAP instanced)one on the Central instance

108. In 3 system landscape from where the request can be imported in QAS system (Single Choice)a)Only from DEVb)Only from QASc)From all of the 3 systemsd)only from PRD

109. Some questions on TMSa)TMSADM are automatically created in 000 client (T/F)b)TMS* RFC’s are automatically generated c)

110. SAPCONNECTa)sapconnect only works with RFC destinations (T/F)b)if you configure sapconnect in client 000 then it is available to all other clients(T/F)c)for Auto reaction method sapconnect needs to be configured in client 000 (T/F)d) for External mail configuration an connection has to be maintained in SCOT (T/F)e)No extra setting required for Mail config(T/F)f)An program has to be scheduled so that sapconnect send external mails . (T/F)

111. RZ20/RZ21a) in order to add create new monitor set you have to switch to ‘Activate Maintenance function mode’ (T/F)b)It is recommended to copy Entire Monitor Set and then make changes to it (T/F)c)It is recommended to keep monitor set with minimum monitoring objects so that loading time of the set is minimum (T/F)d)You should maintain the threshold values of the monitor set (T/F)

112. When you do a modification then (single choice)a)The package /dev class of the object has to be changed to customer dev. Classb) The package /dev class of the object is within that of SAP and cannot be changedc)d)

113. A customer wants to restrict modification what should he doa) change to not modifiable in Se06 system change option (T/F)b)avoid modification by using enhancements & Business Addins(T/F)

114. Further on modificationsa)Every modification has to be registered as SAP Service marketplace (T/F)b)Every manual modification required Developer Acess key for the developer (T/F)

c)Modification request has to be sent to SAP thru FAX(T/F)d) All modifications should be done in DEV system for techincal reasons (T/F)e)If modifications done then further work is required during upgrades (T/F)

115. Use of native SQLa) Will always improve the performance (T/F)b)Will remove the programs from being database independent(T/F)c) data accessed will not be buffered (T/F)d)

116. Operation mode switch from BTC to DIAa)if jobs are running in BTC process then operation modes will be switched after the jobs are completed (T/F)b) if jobs are running in BTC process then operation modes switch will be cancelled (T/F)c)The running jobs would be temporarily put in suspended status (T/F)d)

JAVA Questions:



m) ABAP Dispatchern) JAVA Dispatchero) Massage Serverp) ICMq) Central servicesr) SAP Web dispatcher












i) SAPInst.exej) Aaaaaaaaaa

k) Bbbbbbbbbbbbl) Ccccccccc




e.g.















20. following steps are required to configure SAPCCMSR agenta. Start agent registration in Visual Administrator

b. Create CSMADMIN userc. Create CSMCONF filed. Setup RFC connection to Central monitoring systeme. Create CSMREG user


During availability check with GRMG, an XML document is sent by which protocol ?m) DIAGn) CPICo) XMLp) SSLq) HTTPr) SMTP








JAVA Questions:



s) ABAP Dispatchert) JAVA Dispatcheru) Massage Serverv) ICMw) Central servicesx) SAP Web dispatcher












m) SAPInst.exen) Aaaaaaaaaao) Bbbbbbbbbbbbp) Ccccccccc




e.g.

















During availability check with GRMG, an XML document is sent by which protocol ?s) DIAGt) CPICu) XMLv) SSLw) HTTPx) SMTP




25. Which statements about DTR and CBS are correct?a. DTR consists of an active and an inactive workspace

b. Checking development components into DTR means they can be used by other developersc. Activating development components in CBS means they can be used by other developersd. If the central build fails, the elements of active workspace are placed in inactive workspace




Software logistics – week 3 questions:

5. Features of SAPinst – Read page 19- I had one straight question6. Know non-unicode, Unicode and MCOD well. One question is sure- page 12 to 157. When high security setting are used on iSeries computers, password entries become case sensitive – TRUE /

FALSE8. while installing dialog instance, port number that you specify for message server port can be different from one

specified on the central instance host.( TRUE/ FALSE)

28. you require SAProuter for:a. AAAAAb. SAPNet- R/3 front endc. Early watchd. Remote consulting

29. Which of the following activity is performed by installation check ?a. Completeness of installationb. Version compatibilityc. Accessibility of message serverd. Network security

30. One question on conversion from non-unicode to Unicodea. Read page 312 well. Everybody got one question on that

31. One question for sure on Changes and transports for client-specific objects and client-independent changesa. Read page 351 -352 well. They can ask what should be the setting for a specific type of change. E.g.

automatic recording of changes or changes to repository and cross-client customizing allowed etc. so go through these options well.

32. When you initialize TMS, following actions are automatically performed:a. Transport group GROUP_SID is createdb. Communication user TMSADM is created in client 000c. Transport profile TP_DOMAIN.PFL is created an stored in transport subdirectory bind. TMS configuration file DOMAIN.CFG is stored in transport subdirectory bine. RFC destinations required for TMS are generated

Note: read page 370 well. This is a sure question33. One question for everybody was there on Client-specific Transport Control

a. Read page 392-39334. One question for everybody was there on transport between transport groups and between transport domains

a. Read page 395 to 39835. Straight questions from page 401, question number 2 and 3. I got both36. Project leader and team member responsibility . One question for sure. Read Page 410.37. One question on customizing procedure. Know steps well. You can refer figure 280, page 430.38. One question on SSCR registration concepts. Read page 455.39. One question on requirements for releasing a task and releasing a change request. Refer figure 302, page 474.40. One straight question on IMG. Page 499; test your knowledge, question number 1.41. Page 499; test your knowledge, question number 4.42. One question on preliminary imports. page 518

43. SAP recommends rejecting requests containing errors, during subsequent transports. ( TRUE / FALSE)44. Read about Import queue and import buffer. One question for sure. 45. One question for sure on TP import process. Figure 341-342; page 572, 573, 574. Know TRBAT, TRJOB,

RDDIMPDP , R3TRANS ( Like TP calls R3TRANS etc..) well.46. I had one question from trouble shooting transport page number 584, last paragraph. Log file format

a. Source SID><action><6digits>.TargetSID. some target system name was given and we have to find out log file name.

47. I had one question on command tp check all . page 59648. Two questions exactly same from test your knowledge page number 602. Question number 7 and 8.49. One question from client copy. Local and Remote client copy. Page 609, 610, 611. 50. can Client copy use parallel processing in Client transport- NO.

You can use parallel processing only in local and remote client copy.30. One question on client maintenance settings. Page 631. specifically protection levels.31. SAP notes can change ABAP dictionary objects ( TRUE/FALSE)

a. SAP notes does not require SSCR key ( TRUE/ FALSE)b. SAP note can contain prerequisites, interactions, and references to post processing activities

( TRUE/FALSE)c. SAP note contain solution for an error in source code of SAP ABAP program ( TRUE/ FALSE)

Note: read page 643 last paragraph31. Read page 669 . SPAM and SAINT. One question is for sure specifically SPAM and SAINT update.

Oracle:

19. connect / @DBSID options. Given few options and you have to choose the right one to connect to a DB with given SID

20. Page 39, work process connect to oracle21. Page 75, mount, nomount, etc. when do you need mount status??22. Page 75, shutdown modes. What will happen when its ABORT23. Q12 on page 9124. Tape management. When you have a new tape. ie use scratch option25. Page 176, choose between Complete database recovery or Point-in time recovery or whole based on a given

scenario. For me it was going back to a backup before upgrade scenario. Similar to Q14 in page 20726. Q4 on page 20527. Page 219, data file size for a size given28. Locally managed tabelspace managed by NEXT, etc having few true / false29. One question on what yon can monitor using CCMS (page 257). There were 5 T/F out of which you need to select

the right monitoring attributes.30. Page 271, adding a data file options31. Reorganise question. Many T/F like Need to export & import to reorganize, Online redefinition, having LONG

fields32. One question in Archiver stuck & also where can you add a new log file. Page 309 33. Once question in page 21 (shared SQL Area slide)34. One question on Page 49. Date & also on Estimate & Compute35. Improve SQL by which order ie changing ABAP, creating an index, analyse table, etc36. What does $ORACLE HOME/sapbackup directory contain

From Milans questions: 4, 5, 7, 14, 15, 16, 25, 29, 33, 37 (but it was changes ie when using with SAP so it was SAP<SCHMA-ID>),

Installation & Software Logistics:

32. SAPinst features33. Pre-requist during install ie having all CD’s in parallel34. One question on JRE ie if it’s an old version what will happen, if home is not set, etc35. Need one install of SAP GUI installed36. For Unicode installation, MNLS must be selected or not37. Q2 on page 227 38. One screen shot as in page 266 and T/F like J2EE is running configured, etc, what will happen if it matches the

URL and it in the URL 39. Page 312 unicode to non-unicode

40. One question on page 35141. Q5 on page 35742. Transport Group & domain ie system share directory called a group, domain, etc 5 T/F on this concept43. One question from page 37044. SAP objects can use Z<SID> routes or not, once SAP objects are saved, it must not be saved to SAP route, etc45. One question on Transport group46. Page 401, Q1, Q2, Q347. One question on Project IMG, what can be transported, etc48. What is a package49. Import queue & import buffer50. Import queue are processed in the same order as exported51. Urgent request using preliminary request52. Using workflow to transport from DEV to PRD53. What tables are used in tp process?? Ie TRBAT & TRJOB54. tp steps are collectively processed55. Remote copy creates local file T/F56. Remote copy can update multiple systems57. What happens during client compare & adjust58. One question on downtime minimized. Page 67959. What tools are available during SAP upgrade60. Kernel gets updated during upgrade61. All support packages are grouped along with the upgrade step and are implemented in sequence62. One more question in SAP upgrade which I can’t remember. So don’t skip this chapter

19. External command authorization can be configurable or not20. Need to setup each front end printing device21. Use of logical spool servers22. Type of access method to printer23. How to add profiles to user eg. in pfcg, su01 & some wrong answers24. Type of RFC’s eg qRFC, sRFC, zRFC25. Type of security protocols in SAP like SNC, SSL, etc with 5 different T/F26. One question on Netweaver ie what components are there in Information integration27. One question on LDAP, ie multiple fields can be mapped or not to single field on directory service (similar type

relating to field mapping with 5 different T/F)28. 2 questions on Track in Java like what needs to be preconfigured for starting a development like configuring name,

system, etc, then different steps in the track29. 2 questions on SDM which I can’t remember and also did not know what the answer was. I think this was in

Appendix30. Adding a server in Java31. Different services from a list32. Different admin options of UME (adding users, etc)33. sapxpg to access internal program34. Notes assistant need SSCR, updates modification assistant, etc35. Reason for extended momory like fast content switching with many T/F36. Bypass buffer statements like select…bypassing buffer, select….using buffer, etc T/F

Sample Questions – Unit 4

33) In the Shared SQL Area, you find a Select statement with 10,000 logical read accesses per execution ("Gets/Execution"). What could be the reasons for the high number of read accesses? Note! More than one answer is correct. a) There is a hardware bottleneck (CPU or I/O) on the database server b) There is a network problem between the application server and the DB server. c) The database optimizer has decided in favor of the "incorrect" index OR there is no

appropriate index for the SQL statement. d) There are lockwait situations (Exclusive Lockwait) in the database. e) A large number of records are being transferred from the database to the ABAP program.

34)What is the quality in the following screen dump?a) 95.0

b) 97.7c) 98.7d) 94.4

35)The typical ratio for “User calls” to “reads” from the data buffer for a well tuned R/3 system is approximately:a) 1:10b) 1:20c) 1:15d) 1:100

36)Expensive SQL statement in which there are many buffer gets but only a few records per execution can be tuned by:a) Update of optimizer statisticsb) Increasing the Redo log buffer areac) Change of ABAP coded) Creating an Indexe) Increasing the parameter db_cache_size.

37)What should be the command to update statistics in SAP release 6.10 and higher?a) Sapdba –checkopt followed by sapdba –analyzeb) brconnect –f checkc) brconnect –f statsd) brconnect –f statistics

38)Parsed SQL statements are stored in which of the following Memory area?a) Database buffer cacheb) Shared SQL areac) Redo log bufferd) None of the above

xx.xx

39)One of the expensive statements chooses an unsuitable access path leading to many buffer gets but only a few records per execution. Such type of statements can be tuned with:a) Update of optimizer statisticsb) Change of ABAP codec) Optimizing user inputd) Creating an index

40)One of the expensive statements chooses a suitable access path leading to many buffer gets and many records per execution. Such type of statements can be tuned with:a) Change of ABAP codeb) Optimizing user inputc) Creating an indexd) Tuning of the business process

41)During an investigation by a Basis administrator in the month of February 2005, he came across an expensive statement. What could be his initial reaction?a) Index is missing on the table.b) ABAP code needs to be changed.c) Table statistics is not up to date.d) None of the above.

42)Which of the following statement is true about “Estimated cost” displayed in the execution plan of an SQL statement using “Explain”?a) Estimated cost indicates either the expected number of buffer gets that must be

performed or the expected number of disk accesses.b) CPU time necessary to process the statement greatly influence the estimated costs.

43)An R/3 system has expensive statements if: (1) the number of buffer gets for the topmost statement exceeds 5% of the total number of reads. (2) The ratio of reads to user calls > 15.a) Falseb) True

44)Statements with many buffer gets per execution will lead to:a) High consumption of system resources during execution.b) Should have a low number of executions.c) Should not be executed during peak hours.d) None of the above

45)Which of the following table is used to update the accuracy of table statistics using DB21?a) DBMSGORAb) DBCHECKORAc) DBSTATCd) BDSTATC

46)For the purpose of calculating table statistics, method “Compute” means that only a part of the table is used for the analysis.a) Falseb) True

47)During the process of finding out the code that caused the expensive statement, it is now possible (As of release 4.6 B) to jump directly to the ABAP code from Shared Cache Area.a) Falseb) True

48)An ABAP Open SQL statement is different than the SQL statement in the Shared SQL Area in case of:a) Use of Internal tables (IN TAB)b) The command FOR ALL ENTRIESc) Projection viewsd) SAP Queriese) None of the above

49)Which of the following statements are true?a) The system administrator monitors the impact of expensive SQL statements in the system.

If the system is well tuned and properly sized, he can only analyze the situation and not solve it.

b) It is the job of end-users to optimize the coding, indexes and customizing and is responsible for the data model design.

c) In large installations it is always recommended to log the details of expensive statements in the system and send the summary to IT management if requested.

d) If an expensive statement is less critical, the user can be advised to run the same in the background or during periods of low system activity.

50) In case of an “Index Unique Scan” approximately how many blocks (table and index) could be accessed?a) 1b) 4c) 3d) 10

51)Suppose one large table ZVBAP has 10 fields apart from the primary key on the following 3 fields MANDT, VBELN and POSNR. Which of the following statement is correct?a) A statement such as: SELECT * FROM ZVBAP WHERE MANDT = ‘001’ AND VBELN =

‘0000123’ AND POSNR = ‘0001’ is of type “Index Unique Scan” and will result in more than 1 records.

b) A statement such as: SELECT * FROM ZVBAP WHERE MANDT = ‘001’ AND VBELN = ‘0000123’ is of type “Index Range Scan” and will result in 0 or 1 number of records.

c) A statement such as: SELECT * FROM ZVBAP WHERE MANDT = ‘001’ AND POSNR = ‘0001’ is of type “Index Range Scan”. However it is inefficient leading to the reading of many index blocks that do not contain the requested data.

d) A statement such as: SELECT MANDT, VBELN, POSNR FROM ZVBAP WHERE MANDT = ‘001’ AND POSNR = ‘0001’ will return the data from the index blocks. In this case data blocks do not need to be read resulting in less buffer gets.

e) A statement such as: SELECT * FROM ZVBAP WHERE MANDT = ‘001’ AND MATNR = ‘00815’ is of type unselective “Index Range Scan”. This may lead to reading a very large fraction of index blocks. In such kind of selects maximum Gets/Execution could be = Number of table rows + number of index blocks.

52)Which of the following is true about “Full Table Scan”?a) No index is used during a full table scan.b) Each data block is read once.c) Maximum Gets/Execution could be = Number of table blocks + number of index blocks

53)Which of the following statements are true?a) If table statistics exist, the Oracle cost based optimizer is used and the estimated cost for

the selected access path is > 0.b) If rule based optimizer is used than either ‘estimated costs = 0’ or no estimated costs at all

displayed in the explain output.c) In a query if the options used are not supported by rule based optimizer, the cost based

optimizer is used, although no statistics exist.d) None of the above.

54)Which of the following Oracle parameter control cost calculation functions?a) control_costb) db_file_multi_block_read_countc) eventsd) optimizer_index_cost_adje) cost_pool_size

55)What is SAP recommended value for db_file_multi_block_read_count?a) 16b) 8c) 10d) 24

56)Which of the following R/3 parameters control cost calculation functions?a) rsdb/max_blocking_factorb) dbs/ora/use_hints

57)What is SAP recommended value for rsdb/max_blocking_factor?a) 10b) 5c) 15d) 8

58)Which of the following statements about creating indexes are correct?a) Use only selective fields if possible.b) Use as few fields as possible. Thumb rule: Max 5.c) Create as many indexes per table as possible. There is no limit.d) You are free to change the index created by SAP.

59)Which of the following steps one can take before resorting to creating an index for a table in order to optimize an expensive SQL statement?a) Check for the missing index in DB02 and recreate them.b) Run update statistics.c) Change the code so that existing index can be used.d) Change SAP index without SAP approval.

60)Which of the following statements are true about “Similar Statements”?a) They use the same access path.b) Have the same or similar WHERE clause.c) Have different entries in the Shared SQL area.d) May not be individually expensive, but the sum of similar statements can be expensive.e) None of the above.

61)Are the following statements similar:SELECT * FROM V_MARA WHERE MANDT = ‘001’ AND KOSTL IN (A, B)SELECT * FROM V_MARA WHERE MANDT = ‘001’ AND KOSTL IN (A, B, C)SELECT * FROM V_MARA WHERE MANDT = ‘001’ AND KOSTL IN (A, B, C, …, Z)a) Yesb) No

62)The Shared SQL Area treats statements as “different” if the character string is different.a) Falseb) True

63)How can you avoid similar statements?a) Change the ABAP code so that statements match exactly.b) Use the ABAP command FOR ALL ENTRIES instead of IN conditions.c) Write the statements once in upper case and once in lower case when you are using third

party tools.d) All of the above.

64)Which of the following statements are possible optimization methods for expensive statements with suitable access path?a) Pull the statement out of the loop or nested select if the where clause of the driven

statement does not change.b) Do no think of join or view instead of the nested select as join could be very expensive.c) Process only those records that are required.d) None of the above.

Answers – Unit 4

33)c, e34)c35)c36)a, c, d37)c38)b39)a, b, c, d40)a, b, d41)c42)a43)b44)a, b, c45)c46)a47)b48)a, b, c, d49)a, c, d50)b51)c, d, e52)a, b53)a, b, c54)b, c, d55)b56)a, b57)c58)a, b59)a, b, c60)a, b, c, d61)a62)b63)a, b64)a, c

Here are workload analysis questions:

5. Maximum number of sessions allowed are defined by Max_alt_modeAnd maximum sessions allowed are 16, default is 6

6. What details can you get from SM50 ? A long list was given and you have to choose the correct ones. Refer page 30 to 34. You can get details like:

Report, User, Cl, Table, action like Direct read, Load program, sequential read etc. Remember these well as many of us got this question

7. screen shot was given and some questions: Page number 37 Know difference between CPU utilization and Average CPU load, 1 , 5 and 15 minutes. I had this straight

question8. Read Page 71 well. You may get two questions from that. One on integrated ITS properties and one sure will be on

either Itsp/enable =1 or /sap/bc/gui/sap/its/webgui

8. What does SAP buffers contain? – page 80

a. Aaaaaab. Global contents for users

c. Global contents for work processd. Programs e. Buffered table contents

9. What does Extended memory contain? Page 8110. Reasons for using extended memory

a. Fast context switches are needed in SAP, as many users share few work processesb. Extended memory id accessed through pointers, therefore fast context switches are possiblec. Sap transactions consists usually of more than one step/screend. Extended memory area is generally very huge. So data can be placed there permanently

11. Memory allocation sequence for dialog work processesa. Roll memory up to roll first-extended memory – remaining roll area, heap memory – everybody got

this question- read page 97

12. One question based on Hardware sizinga. Read Hardware Analysis Roadmaps given on page no 119,120 and 121 well, you can get one questionb. And also last paragraph of page 126

13. One screen shot and to find out if the SQL statement is expensive.a. Screen shot similar to page 146 and it was easy to find out that the statement was expensive as number of

buffer gets was too high

13. One question on difference between Compute statistic and estimate statisticsa. Page number 174 top paragraph.

14. Table with frequently changed data should be placed in buffer.a. TRUE / FALSE

15. Following statements bypass table buffering:a. All native SQL statementsb. All OPEN SQL statementsc. SELECE…..BYPASSING BUFFERd. SELECT for UPDATE

16. Read restrictions and Recommendations for table buffering. You will get one question from ita. Page 195

17. RFC + CPIC time consists ofa. CPIC COMMUNICATION TIMEb. Wait , roll in and load timec. Roll out timed. Roll wait timee. Roll in timef. Processing time

18. Which of the following are available as SAP library:a. Compressed HTMLb. PlainHtmlHttpc. PlainHtmlFiled. DynamicHelpe. StatisHelpf. Sap Helpkitg. CompiledHtml

20. Name and location of archived file. Name time is given and you have to tell the exact file name- page 273 figure 181 , last box time 18.11.2004, 12.00 for example

21. Question 2 of page number 29322. I got Three questions from chapter 13. and they were exactly same as given on page 473. So read it carefully.

All the best….!!!!!!

1. SAP* password in 0002. Archive File Name convention - Scenario Given3. R/3 Startup Order details 4. No. of possible clients in SAP System5. Transport User - TMSADM6. Authorisation Profile - PFCG Screenshot7. V1 & V2 Update8. System Time setting9. NetWeaver Components10.Finding out Database host name from Screenshot 11.sapevt/sapxpg12.Transport Domain Profile naming convention 13.H/W Sizing Check14.Response Time

15.ABAP Runtime Error - Time Out : What may be the cause?16.How do you convert a Non-unicode System to Unicode ?17.ST04 - What information you can get?18.SM50/SM51 - What information you can get?19.Installation requiurement - ALL CD's to be mounted/copied to disk20.Language can be installed later or not ?

Donot forget to go through all the chapters of all the books.

1. Operating modes types2. TEMSE is a os file?3. RFC4. sapevt5. sapxpg6. Gateway server,Message Server7. ITS8. Profiles- stored9. checks file - (Upgradation book)10. sap logon11. LOCK concepts (SAP,DB,wkp involved)12. startup sequence13. files to be check when r/3 is not starting14. default profile - contains15. Security can be achieved by using GUI,SNC,Single sign on16. where bkgrd dispatcher will run?

2/2, 7/7, 16/16, 13/13, 6/7, 2/3, 4/4, 5/5., 2/2, 3/3

upto page 24TADM10 Test Your KnowledgeTest Your Knowledge1. The following solutions are provided by SAP:Choose the correct answer(s).A mySAP Business Change Enabler (mySAP BCE)B mySAP Product Lifecycle Management (mySAP PLM)LC mySAP Customer Relationship Management (mySAP LCRM)D mySAP Supply Chain Management (mySAP SCM) LE mySAP Strategic Organization Planning (mySAP SOP)F mySAP Human Resources (mySAP HR) L2. The following statements about the SAP Web Application Serverare correct.Choose the correct answer(s).A SAP Web Application Server is an evolutionarydevelopment of the previous SAP runtime environment. L B SAP Web Application Server can run only applicationswritten in ABAP.C SAP Web Application Server can run only on MicrosoftWindows platforms.D SAPWeb Application Server provides an SMTP interface,among others. LE SAP Web AS is not scalable. 2003/Q3 © 2003 SAP AG. All rights reserved. 15Test Your Knowledge TADM10Answers1. The following solutions are provided by SAP:Answer: B, C, D, F

mySAP BCE and mySAP SOP are imaginary products. The others arereal SAP solutions.2. The following statements about the SAP Web Application Serverare correct.Answer: A, DSAP Web Application Server is a further development of the previousSAP Application Server. SAP Web AS can run applications written inJava using the SAP J2EE Engine and is fully scalable. It can also berun on all previously supported platforms and offers a large numberof interfaces, such as an SMTP interface.

Test Your Knowledge1. You can only work in one window (session) at a time in an SAPsystem.Determine whether this statement is true or false.TrueFalse L2. Which of the following statements accurately describe a client in anSAP system?Choose the correct answer(s).A A client represents a completely independent businessentity. LB A client has its own database.C A client corresponds to a customer.D A client may represent an entire company. L3. The following strings are valid entries in the command field:Choose the correct answer(s).A /nend LB /nex LC ?SM04D /nsm04 LE From SAP Easy Access: SM04 LF FromSAPEasyAccess:search_sap_menu L4. You can use the F1 key to:Choose the correct answer(s).A Display an explanation of a field.s uses LB Display a list of possible input valuesC Change your user data (for example, the logon language)D EndthesessionyouareinE Display detailed technical information on a field L2003/Q3 © 2003 SAP AG. All rights reserved. 51Test Your Knowledge TADM105. You can use the F4 key to:Choose the correct answer(s).A StartanothersessionB Display detailed technical information on a programC Call the SAP LibraryD Display possible entries for an input field LE Create a print request of the screen currently displayed6. You can also call the context-sensitive SAP Library using the F1 key.Determine whether this statement is true or false.True LFalse7. The following personalization options are available in the SAP GUI:Choose the correct answer(s).A You can change the font size (within limits) in the SAP GUI LB You can have system messages displayed in a dialog box LC You can change the size of input fieldsD You can suppress the display of pictures in the SAP GUI L

E Every user can display a picture of his or her choice onthe SAP Easy Access screenF You can use a personal input history on your front end L52 © 2003 SAP AG. All rights reserved. 2003/Q3TADM10 Test Your KnowledgeAnswers1. You can only work in one window (session) at a time in an SAPsystem.Answer: FalseYou can work in up to 16 windows (sessions) simultaneously perlogon (as of SAP Web AS 6.20).2. Which of the following statements accurately describe a client in anSAP system?Answer: A, DThe data for all clients in an SAP systemis stored within a singlecommon database. This data is nevertheless divided by client so thatdifferent companies can be administered and controlled in differentclients. A client is .not. a customer within an SAP system.3. The following strings are valid entries in the command field:Answer: A, B, D, E, FYou can enter valid transaction codes directly on the SAP Easy Accessscreen. If you are in another function, you need to enter /n in frontof the transaction code. /nend and /nex are two different logoffoptions. ?SM04 is not a valid entry. search_sap_menu is a validentry; it creates a search screen for entries in the SAP menu.4. You can use the F1 key to:Answer: A, EThe F1 help provides documentation and technical information ona field.5. You can use the F4 key to:Answer: DThe F4 key provides a list of possible entries for a selected field.2003/Q3 © 2003 SAP AG. All rights reserved. 53Test Your Knowledge TADM106. You can also call the context-sensitive SAP Library using the F1 key.Answer: TrueYou can call the context-sensitive help using the Application Helppushbutton in the F1 help window.7. The following personalization options are available in the SAP GUI:Answer: A, B, D, FNumerous personalization options are available, using the Extrasmenu, the Customizing of local layout pushbutton, and using the statusbar and Help→Settings.... End users cannot, however, change the sizeof input fields. You also cannot use the SAP GUI to display a pictureof your choice on the SAP Easy Access screen.54 © 2003 SAP AG. All rights reserved. 2003/Q3

Test Your Knowledge1. What are the advantages of a three-tier client/server configuration ascompared to a single-tier or two-tier configuration?Choose the correct answer(s).A Simpler scalability LB SimpleradministrationC Load balancing possible LD None of the above2. Which process at the application server level receives the user request?Choose the correct answer(s).A workprocess

B dispatcher LC ThebufferD SAPGUI3. What types of SAP GUI are there?Choose the correct answer(s).A SAP GUI for the Windows environment LB SAP GUI for the Java environment LC SAPGUIforLinuxD SAPGUIforHTML L4. The SAP Web Application Server database interface enables you to:Choose the correct answer(s).A Enhance performance using the local buffers LB Access online databases on the InternetC Use database-independent Open SQL in ABAP programs LD Access file content on the SAP Web Application Server2003/Q3 © 2003 SAP AG. All rights reserved. 123Test Your Knowledge TADM105. Which work process types can you find on an SAPWeb ApplicationServer?Choose the correct answer(s).A Dialog work process LB Message server work processC Updateworkprocess LD ICMworkprocessE Background work process LF enqueue work process LG Spool work process L6. The term .central instance. describes the instanceChoose the correct answer(s).A that you are logged on to while working in the systemB On which all application processes required for operatingan SAP system are configured LC On which the gateway process is configuredD On which the majority of work processes are configuredE On which the majority of dialog work processes areconfigured7. What tasks does the task handler carry out?Choose the correct answer(s).A CommunicateswithSAPGUIB Coordinates activities within the work process LC Accesses the databaseD ProcessestheABAPcodingonwhich a transaction is based8. Is the assignment of users to dialog work processes fixed?Choose the correct answer(s).A Yes, it is fixed for the entire time that the user is loggedon to the SAP systemB Yes, it exists for the entire duration of a transactionconsisting of several screensC No. Each dialog step of a transaction, consisting of severalscreens, can theoretically be processed by a different workprocess LD None of the above124 © 2003 SAP AG. All rights reserved. 2003/Q3TADM10 Test Your Knowledge9. Database transactions are based on the ACID principle. So are SAPtransactions. Why does the database transaction concept neverthelessnot cover all the needs of the SAP system?Choose the correct answer(s).A An SAP transaction can bundle several databasetransactions. It is only as a result of all of these bundled

database transactions that the data is consistent in businessterms. LB Due to work process multiplexing, each work process startsa separate database transaction within each dialog step. LC This is because SAP developers have not done their jobproperly.D Using the SAP transaction as a structural level abovethe database transaction significantly improves theperformance of your SAP system.10. Where is the lock table?Choose the correct answer(s).A InthedatabaseB In the main memory of the application server on which theenqueue work process is configured LC At operating system level of the database hostD The system administrator can define the location of the locktable using the profile parameter renq/store_location11. It makes sense, in an SAP system, to configure several enqueue workprocesses on different SAP Web Application Servers.Determine whether this statement is true or false.TrueFalse L12. Why are asynchronous updates used for dialog transactions?Choose the correct answer(s).A Only asynchronous updates can access the SAP systembuffersB Because an SAP transaction can consist of several databasetransactions and this approach means that the requirementsfor the rollback are met LC Because only update work processes can access the databasedataD None of the above2003/Q3 © 2003 SAP AG. All rights reserved. 125Test Your Knowledge TADM1013. During asynchronous updates, which process records the data tobe changed in VB* tables?Choose the correct answer(s).A UpdateworkprocessB dispatcherC Recording work processD Dialog work process L14. Answer the following questions with reference to the two accessmethods you have learned about, .remote. and .local.. Otheranswers may be correct for other access methods. Which workprocess types are primarily responsible for creating spool requests?Choose the correct answer(s).A Dialog LB UpdateC SpoolD Background LE Enqueue15. Which processes and hardware elements are involved (and in whatorder) in handling the print process using the .remote. accessmethod? The flow is only outlined here.Choose the correct answer(s).A S-WP → Operating system → Network → PrinterB SAP output formatting program → Network → SAP GUI →Front-end CPU → PrinterC D-WP → TemSe → S-WP → Network → Operating systemspool → Printer L

D D-WP →S-WP→Database→ Network→TemSe→Operatingsystem spool → PrinterE D-WP → S-WP → TemSe → Network → Printer16. What is background processing used for?Choose the correct answer(s).A Periodic tasks LB Tasks that require user interactionC Long-running tasks LD Printing lists126 © 2003 SAP AG. All rights reserved. 2003/Q3TADM10 Test Your KnowledgeAnswers1. What are the advantages of a three-tier client/server configuration ascompared to a single-tier or two-tier configuration?Answer: A, CImplementing an additional hardware layer for application processesmakes it easier to adapt an SAP system if the number of users changes(scalability), and to assign user groups to specific application servers(software-oriented view), (load balancing). The additional hardwarelayer does not, however, reduce the administrative workload.2. Which process at the application server level receives the user request?Answer: BThe dispatcher receives the user request on the applicationserver and passes it on to an available work process. The SAPpresentation program, SAP GUI, is not part of the application server(software-oriented view), and the buffer enables quicker processingof user requests.3. What types of SAP GUI are there?Answer: A, B, DThere is a SAP GUI for the Windows environment, based on theWindows platform, there is a platform-independent SAP GUI for theJava environment, and a SAP GUI for HTML, consisting of a browserand an Internet Transaction Server. There is no such thing as SAPGUI for Linux.4. The SAP Web Application Server database interface enables you to:Answer: A, CWhen the ABAP Interpreter sends a query to the database, thedatabase interface reads the data from the SAP Web ApplicationServer.s local buffer, if possible. If the data required is not present inthe buffer, then the interface turns the Open SQL statement from theABAP coding into database-specific native SQL coding. The databaseinterface is not used to access the content of online databases on theInternet or files on the SAP Web Application Server.2003/Q3 © 2003 SAP AG. All rights reserved. 127Test Your Knowledge TADM105. Which work process types can you find on an SAPWeb ApplicationServer?Answer: A, C, E, F, GAll of the above processes can in theory be configured on an SAPWeb Application Server. However, not all of the above processes arework processes. The message server and ICM process are not workprocesses.6. The term .central instance. describes the instanceAnswer: BThe central instance is the instance on which all application processesrequired for operating an SAP system are configured. Specifically,the central instance therefore also contains processes that are onlypresent once per system (such as the message server). Every instancehas a gateway process, the existence of a gateway process does nottherefore denote the central instance. The number of dialog work

processes, or the total number of work processes configured on thecentral instance is not relevant in this context.7. What tasks does the task handler carry out?Answer: BThe task handler coordinates activities within a work process. Thework process and the user.s SAP GUI do not communicate directly,but through the dispatcher. The database is accessed through thedatabase interface and the ABAP coding is executed by the ABAPprocessor.8. Is the assignment of users to dialog work processes fixed?Answer: CThe dispatcher reassigns the user to a dialog work process for eachdialog step in a transaction. The assignment of users to dialog workprocesses is therefore not fixed. (The only exception to this rule isthe debugging mode, in which one dialog process is assigned to onespecific user.)128 © 2003 SAP AG. All rights reserved. 2003/Q3TADM10 Test Your Knowledge9. Database transactions are based on the ACID principle. So are SAPtransactions. Why does the database transaction concept neverthelessnot cover all the needs of the SAP system?Answer: A, BEvery dialog work process starts a new database transaction withineach dialog step. An SAP transaction can bundle several databasetransactions into units that makes sense in business terms . this isnot related to performance issues.10. Where is the lock table?Answer: BThe lock table is located in the main memory of the SAP WebApplication Server on which the enqueue work process is configured.11. It makes sense, in an SAP system, to configure several enqueue workprocesses on different SAP Web Application Servers.Answer: FalseIt does not make sense to configure enqueue work processes ondifferent SAP Web Application Servers, since there can be only onelock table per SAP system and this lock table is located in the mainmemory of the SAP Web Application Server on which the enqueuework process is configured.12. Why are asynchronous updates used for dialog transactions?Answer: BAsynchronous updates solve the problems caused by the differentinterpretations of transaction at database level and at SAP level.Bundling all updates for one SAP transaction into a single databasetransaction ensures that the data that belongs to this SAP transactioncan be rolled back completely. Every work process is continuouslyconnected to the database, therefore every work process can accessthe database dataset. Access to the SAP system buffers does notdepend on the type of update used.2003/Q3 © 2003 SAP AG. All rights reserved. 129Test Your Knowledge TADM1013. During asynchronous updates, which process records the data tobe changed in VB* tables?Answer: DThe dialog process records the data to be changed in the VB* tables,while the update work process handles the final update of the targettables (the tables that are actually relevant to business). There is nosuch thing as a recording work process.14. Answer the following questions with reference to the two accessmethods you have learned about, .remote. and .local.. Otheranswers may be correct for other access methods. Which work

process types are primarily responsible for creating spool requests?Answer: A, DMost printing requests are started in the dialog or in backgroundprocessing.15. Which processes and hardware elements are involved (and in whatorder) in handling the print process using the .remote. accessmethod? The flow is only outlined here.Answer: CDepending on the settings of the relevant system parameters, theTemSe might be located in different .places.: normally it is either inthe database or at file-system level on the central instance.16. What is background processing used for?Answer: A, CBackground processing is typically used for long-running tasks ortasks that recur regularly. The prerequisite is that these tasks do notrequire user interaction. The spool work process is responsible forprinting lists.130 © 2003 SAP AG. All rights reserved. 2003/Q3

Test Your Knowledge1. Application Link Enabling (ALE) allows you to:Choose the correct answer(s).A Exchange data only between SAP systems, as long as theyhave the same release statusB Exchange data across system boundaries, but only for SAPapplicationsC Exchange data between collaborating enterprises, usingcertain formats and technologies LD The communication between different systems of yoursystem landscape LE Update your order data using the appropriate BAPI, onlyonce every 24 hours2. The following interfaces and communication options are supportedby SAP systems:Choose the correct answer(s).A HTTP (HyperText Transfer Protocol) LB SMTP (Simple Mail Transfer Protocol) LC RFC(RemoteFunctionCall) LD BAPIs (Business Application Programming Interfaces) LE XDTP (Extended Data Transfer Protocol)F STP (SAP Transfer Protocol)3. You can use BAPIs to:Choose the correct answer(s).A Request data from an SAP system LB Pass data to an SAP system LC Transfer SAP screen images to third-party applications(such as MS Word)D Access business processes in SAP systems L4. You access BAPIs in SAP systems using an RFC interface.Determine whether this statement is true or false.True LFalse2003/Q3 © 2003 SAP AG. All rights reserved. 173Test Your Knowledge TADM105. Business Application Application Programming Interfaces arespecialized function function modules. They are accessed usingthe RFC RFC interface. They are created and managed using theFunction Function Builder.Fill in the blanks to complete the sentence.

Applicaion, function, RFC, function6. SAP Business Workflow ensures that:Choose the correct answer(s).A Appropriately configured business processes can bepartially automated LB Appropriately configured business processes are executedin consistent sequences LC The right employee receives the right work at the right time LD Your workflow-supported business processes are handledmore efficiently LE All your company processes that have been implemented inABAP run without errors7. You can also use SAP BusinessWorkflow functions (for example, withXML) to trigger functions in other systems.Determine whether this statement is true or false.True LFalse8. The SAP ITS provides the following functions/options:Choose the correct answer(s).A Automatically converts protocols from HTTP to DIAG/RFCand back LB Automatically generates SAP screens as HTML pages LC Uses IACs to implement predefined Internet scenarios LD SendsIDocsE The WGate communicates directly with dialog workprocessesF The AGate communicates with SAP system application Lservers174 © 2003 SAP AG. All rights reserved. 2003/Q3TADM10 Test Your Knowledge9. The following statements are true of the SAPWeb Application Server:Choose the correct answer(s).A The SAP Web AS enables the creation of Business ServerPages LB The ICM is a process outside the SAP Web AS, as is theSAP ITSC The ICM uses a Web server to communicate with WebbrowsersD You can use a URL to call Business Server Pages directlyin your browser LE You can only install the SAP Web AS in conjunction withthe SAP ITS10. The SAP BC enables ALE scenarios across company boundaries. Determine whether this statement is true or false.True LFalse11. SAP provides the following tools free of charge to help you organizeyour data transfer project:Choose the correct answer(s).A Data Transfer Workbench (DX Workbench) LB Data Transfer Enabler (DTE)C Flat File Importer (FFI)D Legacy System Migration Workbench (LSMW) LE Database Content Replicator (DCR)F ERP Data Transfer Wizard (EDTW)12. The following methods and interfaces are available for importingdata into SAP systems:Choose the correct answer(s).A BAPIs (Business Application Programming Interfaces) LB IDocs (Intermediate Documents) L

C Batch input LD DIIs (Data Import Interfaces)E STF (SAP table filler)F None of the above2003/Q3 © 2003 SAP AG. All rights reserved. 175Test Your Knowledge TADM1013. Where can you download the Legacy System MigrationWorkbench? L176 © 2003 SAP AG. All rights reserved. 2003/Q3TADM10 Test Your KnowledgeAnswers1. Application Link Enabling (ALE) allows you to:Answer: C, DALE is a very powerful method of exchanging data between systems.These systems may be located within the same company, or they maybe distributed between several companies. The data is transferredby RFC in a previously defined format. The transfer type may besynchronous or asynchronous.2. The following interfaces and communication options are supportedby SAP systems:Answer: A, B, C, DFrom an SAP system, you can communicate with other systems using,for example, HTTP, SMTP, RFC, or BAPIs. XDTP and STP do not exist.3. You can use BAPIs to:Answer: A, B, DYou can use BAPIs to access business processes in an SAP system andto request and transfer data between systems. GUI functions cannotbe transferred to third-party products.4. You access BAPIs in SAP systems using an RFC interface.Answer: TrueBAPIs are nothing other than special, remote-enabled functionmodules. They can therefore also be addressed using RFCs.5. Business Application Programming Interfaces are specializedfunction modules. They are accessed using the RFC interface. Theyare created and managed using the Function Builder.Answer: Application, function, RFC, FunctionYou can start the Business Object Repository using transaction codeBAPI, and the Function Builder using transaction code SE37.2003/Q3 © 2003 SAP AG. All rights reserved. 177Test Your Knowledge TADM106. SAP Business Workflow ensures that:Answer: A, B, C, DSupporting business processes with workflow enables the worksteps that belong to these processes to be handled on a partiallyautomated basis. These steps are assigned in consistent sequences tothe appropriate employee at the right point in time. This enhancesprocessing efficiency. Using workflow obviously does not guaranteethat the programs you write will always run without errors.7. You can also use SAP BusinessWorkflow functions (for example, withXML) to trigger functions in other systems.Answer: TrueYou can use workflow to send XML messages that then triggersubsequent actions in other systems, as long as they are appropriatelyconfigured.8. The SAP ITS provides the following functions/options:Answer: A, B, C, FThe SAP ITS automatically converts protocols from HTTP toDIAG/RFC, and vice versa; it also generates HTML pages from SAPscreens and makes predefined Internet scenarios available as IACs.The ITS does not send IDocs, nor does the WGate communicatedirectly with work processes. The application gateway carries out this

part of the communication process.9. The following statements are true of the SAPWeb Application Server:Answer: A, DThe SAPWeb AS provides the ICM as a completely integrated processthat enables you to call BSPs directly, using a URL. You do not needeither an SAP ITS or a Web server to do this.10. The SAP BC enables ALE scenarios across company boundaries.Answer: TrueBecause the SAP BC can transfer data in XML format to other systems,it enables inter-enterprise ALE scenarios.178 © 2003 SAP AG. All rights reserved. 2003/Q3TADM10 Test Your Knowledge11. SAP provides the following tools free of charge to help you organizeyour data transfer project:Answer: A, DThe Data Transfer Workbench and the Legacy System MigrationWorkbench.12. The following methods and interfaces are available for importingdata into SAP systems:Answer: A, B, CBAPIs, IDocs and batch input, along with direct input, are the primaryprocedures used to import data into an SAP system. The remaininganswers are wrong.13. Where can you download the Legacy System Migration Workbench?Answer: You can download the Legacy System MigrationWorkbenchon the SAP Service Marketplace, using the Quick Link /lsmw followedby the download area for that page.2003/Q3 © 2003 SAP AG. All rights reserved. 179

Test Your Knowledge1. The instance that, together with the database, creates a runnable SAPsystem, is called the central instance central instance.Fill in the blanks to complete the sentence.Central System2. What types of work processes are there in the SAP system?Choose the correct answer(s).A Updateworkprocess LB Spool work process LC Dialog work process LD ICM work processE Enqueue work process LF Instance work process3. SAP systems usework process multiplexing work process multiplexing technologyto process user requests.Fill in the blanks to complete the sentence. L

4. Which button(s) can you use to create new entries in the SAP Logonsystem list?Choose the correct answer(s).A PropertiesB New LC LogonD Groups LE Server LF Create5. What possible advantages does the correct use of logon groups offer?Choose the correct answer(s).A The users are automatically logged on to the correct system

B The program buffers perform better LC The program buffers can be set up smaller LD The program buffers may now be larger than 1 GB in size2003/Q3 © 2003 SAP AG. All rights reserved. 211Test Your Knowledge TADM106. With which transaction can you obtain an overview of the instancesof your SAP system?Choose the correct answer(s).A SM50B SM51 LC SM52D SM047. You can use transaction SM12 SM12 to manage the lock entries of theSAP system. Transaction SM13 SM13 is used to manage the updaterequests.Fill in the blanks to complete the sentence.sm12, sm13212 © 2003 SAP AG. All rights reserved. 2003/Q3TADM10 Test Your KnowledgeAnswers1. The instance that, together with the database, creates a runnable SAPsystem, is called the central instance.Answer: central instance2. What types of work processes are there in the SAP system?Answer: A, B, C, EThe ICM (Internet Communication Manager) is not a work process,but rather a service of the SAP Web Application Server. An instanceconsists of a dispatcher and multiple work processes. The instanceitself is therefore not a work process. In addition to the correct workprocess types listed above, there are also background work processes.3. SAP systems use work process multiplexing technology to processuser requests.Answer: work process multiplexingPut differently, this means that there is not a one-to-one assignment ofuser to dialog work process for the entire duration of the logon.4. Which button(s) can you use to create new entries in the SAP Logonsystem list?Answer: B, D, EYou can use the Properties button to display the properties of an entry.You can use the Logon button to log on the selected system. There isno Create button in the SAP Logon program.5. What possible advantages does the correct use of logon groups offer?Answer: B, CThe users still need to log on to the system in the normal way afterlogon groups have been configured. Creating logon groups is not aprerequisite for setting buffer sizes of above 1 GB.2003/Q3 © 2003 SAP AG. All rights reserved. 213Test Your Knowledge TADM106. With which transaction can you obtain an overview of the instancesof your SAP system?Answer: BTransaction SM50 lists the work processes of an instance. TransactionSM52 does not exist, and transaction SM04 calls the user list for aninstance.7. You can use transaction SM12 to manage the lock entries of the SAPsystem. Transaction SM13 is used to manage the update requests.Answer: SM12, SM13Transactions SM12 and SM13 are important tools for the systemadministrator.214 © 2003 SAP AG. All

Test Your Knowledge1. Which SAP processes are started when the SAP system or an instanceis started?Choose the correct answer(s).A SAPOSCOL LB START_SAP_NOWC Message Server LD Gateway Server LE LAUNCH_DB2. Log information for the dispatcher is stored in the filedev_disp dev_disp. You can control the granularity of the loggedinformation using the profile parameter rdisp/TRACE rdisp/TRACE.There are four four trace levels; error messages and warnings aredisplayed, by default, at level 1 1.Fill in the blanks to complete the sentence.dev_disp, 4, 23. You can display the users logged on to the SAP system withtransactions SM04 SM04 and AL08 AL08. You can obtain an overviewof the scheduled background jobs with transaction SM37 SM37. Youcan use transaction SM02 SM02 to send a system message to the usersthat are logged on.Fill in the blanks to complete the sentence.sm04,al08,sm022003/Q3 © 2003 SAP AG. All rights reserved. 253Test Your Knowledge TADM10Answers1. Which SAP processes are started when the SAP system or an instanceis started?Answer: A, C, DSAPOSCOL is an underlying process that should always be running,even if the SAP system is shut down. START_SAP_NOW andLAUNCH_DB are made up. The message server is started once foreach SAP system, and the gateway server is started once for eachinstance.2. Log information for the dispatcher is stored in the file dev_disp. Youcan control the granularity of the logged information using the profileparameter rdisp/TRACE. There are four trace levels; error messagesand warnings are displayed, by default, at level 1.Answer: dev_disp, rdisp/TRACE, four, 13. You can display the users logged on to the SAP system withtransactions SM04 and AL08. You can obtain an overview of thescheduled background jobs with transaction SM37. You can usetransaction SM02 to send a system message to the users that arelogged on.Answer: SM04, AL08, SM37, SM02Transaction SM04 is instance-specific, transaction AL08, on the otherhand, is cross-instance. In transaction SM37, you can select by clientand user, among other things. In transaction SM02, you can restrictthe sending of the message to instances or clients.254 © 2003 SAP AG. All rights reserved. 2003/Q3

Test Your Knowledge1. In which sequence are the system parameters read from the specifiedlocations by the system?Choose the correct answer(s).A 1. Instance profile 2. Default profile 3. KernelB 1. start.ini 2. Kernel 2. Default profile 4. Instance profile

C 1. Kernel 2. Default profile 3. Instance profile LD 1. Kernel 2. start.ini 3. Default profile 4. Instance profile2. In which profile can you change the number of background workprocesses?Choose the correct answer(s).A Start profileB Default profileC Background profileD Instance profile L3. You can use transaction RZ10 RZ10 to check the consistency ofindividual profiles.Fill in the blanks to complete the sentence.rz104. In which sequence should you perform the listed steps when settingup operation modes?Choose the correct answer(s).A 1. Create operation modes 2. Assign instances 3. Distributework processes 4. Maintain time table LB 1. Create operation modes 2. Maintain time table 3.Distribute work processes 4. Assign instancesC 1. Create operation modes 2. Distribute work processes 3.Maintain time table 4. Assign instances2003/Q3 © 2003 SAP AG. All rights reserved. 289Test Your Knowledge TADM10Answers1. In which sequence are the system parameters read from the specifiedlocations by the system?Answer: CThere is no file called start.ini involved in this context; it has beenmade up.2. In which profile can you change the number of background workprocesses?Answer: DThe instance profile is the correct profile in this case, as settings inthis profile only apply to the affected instance, and the number ofwork processes for an instance is to be defined here. The start profilecontains information about the processes to be started during thesystem start. In the default profile, you maintain parameters thatapply to all instances or for the entire SAP system. The backgroundprofile does not exist.3. You can use transaction RZ10 to check the consistency of individualprofiles.Answer: RZ10In addition to the consistency of the individual profiles, you can usetransaction RZ10 to check all profiles. In this case, the system alsochecks the consistency between the profiles.4. In which sequence should you perform the listed steps when settingup operation modes?Answer: AIt is especially important that you follow the correct sequence whenfirst setting up the operation modes.290 © 2003 SAP AG. All rights reserved. 2003/Q3

Test Your Knowledge1. The SAP Library provides you with information about how you canpartition your hard disks.Determine whether this statement is true or false.TrueFalse L

2. The SAP Library also offers a glossary of important terms.Determine whether this statement is true or false.True LFalse3. The SAP Library is only available in the Internet at the URLhttp://help.sap.com.Determine whether this statement is true or false.TrueFalse L4. The following technical forms of the online help, also known as theSAP Library, are available:Choose the correct answer(s).A Compressed HTML (.comphtml)B PlainHtmlHttp LC PlainHtmlFile LD StaticHelpE DynamicHelp LF SAPHelpKit5. The sapdoccd.ini file can be stored in three different places.In which sequence is the directory tree searched: A) C:\ProgramFiles\SAP\FrontEnd\, B) C:\WINNT, and C) C:\ProgramFiles\SAP\FrontEnd\SAPgui?2003/Q3 © 2003 SAP AG. All rights reserved. 309Test Your Knowledge TADM10Answers1. The SAP Library provides you with information about how you canpartition your hard disks.Answer: FalsePartitioning hard disks is not part of the SAP Library.2. The SAP Library also offers a glossary of important terms.Answer: TrueYes, it does.3. The SAP Library is only available in the Internet at the URLhttp://help.sap.com.Answer: FalseThe SAP Library can and should also be set up locally, for example ona file or Web server.4. The following technical forms of the online help, also known as theSAP Library, are available:Answer: B, C, ECompressed HTML does not exist, although Compiled HTML(.chm) does. Compiled HTML is the recommended format for32 bit Microsoft Windows front ends. The other help types arePlainHtmlHttp, PlainHtmlFile, and DynamicHelp.5. The sapdoccd.ini file can be stored in three different places.In which sequence is the directory tree searched: A) C:\ProgramFiles\SAP\FrontEnd\, B) C:\WINNT, and C) C:\ProgramFiles\SAP\FrontEnd\SAPgui?Answer: The sequence is: B - C - A.310 © 2003 SAP AG. All rights reserved. 2003/Q3

Test Your Knowledge1. Changes to the data are logged by the database in the log files log files.These files also contain the changes in status of the database database.Fill in the blanks to complete the sentence.redo log file, database2. To minimize the risk of data loss, we strongly recommend adaily daily complete data backup. If you use a partial data backupas your daily backup, you must perform a complete data backup atleast once a week week.

Fill in the blanks to complete the sentence.daily, weekly2003/Q3 © 2003 SAP AG. All rights reserved. 331Test Your Knowledge TADM10Answers1. Changes to the data are logged by the database in the log files. Thesefiles also contain the changes in status of the database.Answer: log files, databaseThe log mechanism is essential and must not be deactivated.2. To minimize the risk of data loss, we strongly recommend a dailycomplete data backup. If you use a partial data backup as your dailybackup, you must perform a complete data backup at least once aweek.Answer: daily, weekIn addition to a complete data backup, you should, of course, alsoback up the log information at least once a day.332 © 2003 SAP AG. A

Test Your Knowledge1. Every archiving object in the SAP system is connected 1:1 with thecontent of a single database table.Determine whether this statement is true or false.TrueFalse L2. The names of the archive files are determined at runtime. How arethese names generally specified for a specific archiving object?Choose the correct answer(s).A By cross-object Customizing settingsB By maintaining a local path and assigning the logical pathto a physical path in the Basis CustomizingC By assigning a physical file name to a logical file name inBasis Customizing and assigning a logical file name to anarchiving object in the archiving object-specific Customizing LD By the exact time of the archiving run3. After data has been archived from the SAP system and deleted itfrom the SAP system.s database, it is no longer possible to access thisdata with read accesses.Determine whether this statement is true or false.TrueFalse L2003/Q3 © 2003 SAP AG. All rights reserved. 361Test Your Knowledge TADM10Answers1. Every archiving object in the SAP system is connected 1:1 with thecontent of a single database table.Answer: FalseDifferent business objects could belong to each archiving object in theSAP system. The data for these business objects could, in turn, bedistributed across multiple database tables.2. The names of the archive files are determined at runtime. How arethese names generally specified for a specific archiving object?Answer: CThe name of the archive files is determined at runtime by settings inthe archiving object-specific Customizing (assignment of a logical filename for the specific archiving object) and in the Basis Customizing(assignment of a physical file name to a logical file name in theBasis Customizing and the assignment of a logical file name).No specifications about the name of the archive file are made incross-object Customizing. The exact time of the archiving run canappear in the name of the archiving file using a parameter, but the

name is generally not determined by this alone.3. After data has been archived from the SAP system and deleted itfrom the SAP system.s database, it is no longer possible to access thisdata with read accesses.Answer: FalseIt is still possible to access data to read it after it has been stored inthe archive and deleted from the SAP system.s database. Dependingon the archiving object concerned, there may be a number of viewsbetween which the user can choose (such as a technical view and abusiness view).362 © 2003 SAP AG. All ri

Test Your Knowledge1. Which elements are part of the data structure of an SAP system?Choose the correct answer(s).A Registry repository B Object repository LC Client LD Database serverE Cross-Client Customizing LF SAPKernel2. Decide which of the following statements are correct.Choose the correct answer(s).A Entering customer data requires a Customizing request.B A change request contains one or more tasks. LC A task can always be assigned to only one developer. LD Any Customizing requires a Customizing request.3. Which statements are correct?Choose the correct answer(s).A The transport of objects is divided into Export, Storage,and Import phases. B The import into the target system is performedautomatically at midnight GreenwichMean Time.C The transport directory is specified by parameterDIR_TRANS. LD When transporting, the following rule applies: The targetclient is the same as the source client, unless otherwisespecified. L2003/Q3 © 2003 SAP AG. All rights reserved. 389Test Your Knowledge TADM10Answers1. Which elements are part of the data structure of an SAP system?Answer: B, C, EThe object repository, cross-client Customizing, and the clients arepart of the data structure of an SAP system. The database structure isnot part of the data structure; rather, it contains it.2. Decide which of the following statements are correct.Answer: B, CEntering customer data is not part of Customizing and thereforedoes not require a Customizing request. Only client-dependentCustomizing requires a Customizing request; cross-clientCustomizing, on the other hand, requires a workbench request.A change request contains one or more tasks, each of which areassigned to only one developer.3. Which statements are correct?Answer: C, DThe transport is divided into only two phases, Export and Import.The import into the database of the target system is never performedautomatically.390 © 2003 SAP AG. All rights reserved.

Test Your Knowledge1. What is the ABAP Workbench?Choose the correct answer(s).A A performance assessment tool for ABAP programsB A sort of to do list for ABAP developers; contains all tasksstill to be processedC An integrated graphical development environment forABAP programs LD A directory of all valid ABAP commands2. How can you access an SAP transaction.s underlying ABAP code(assuming that you have the authorization to do so)?Choose the correct answer(s).A System → Status , and double click .Program (Screen).under .Repository Data. LB ByusingProgram → Display source code, available in everySAP transactionC By calling the ABAP Editor and entering the correspondingABAP program name LD By pressing F2 when you are in a transaction3. What do you use domains for?Choose the correct answer(s).A For defining the technical attributes of a field LB For adding foreign key dependenciesC For defining the semantic attributes of a fieldD For entering data in a table4. What is a foreign key ?Choose the correct answer(s).A The definition of technical attributes of fields in a tableB A key that developers need to be able to edit RepositoryobjectsC The definition of relationships between tables to ensuretheir consistency LD The key required for installing an SAP system on a hostcomputer on which a non-SAP system is already installed2003/Q3 © 2003 SAP AG. All rights reserved. 417Test Your Knowledge TADM10Answers1. What is the ABAP Workbench?Answer: CThe ABAP Workbench is the SAP system.s integrated graphicaldevelopment environment. It supports, among other things, thedevelopment and administration of applications written in ABAP,SAP.s programming language. The Workbench also containstransactions for assessing the performance of ABAP commands andfor managing development projects. These are, however, simplycomponents of the Workbench.2. How can you access an SAP transaction.s underlying ABAP code(assuming that you have the authorization to do so)?Answer: A, CYou can access the source code using System → Status and choosingProgram (Screen), or using the ABAP Editor. The menu path System →Status is available on every screen.3. What do you use domains for?Answer: AYou use domains for defining the technical attributes of fields ina table. The semantic attributes of a field are defined in the dataelement.4. What is a foreign key ?Answer: C

A foreign key defines a relationship between two tables. A foreignkey assigns the fields of one table (known as the foreign key table) tothe primary key fields of another table (known as the check table).The technical attributes of table fields are defined in a domain. Youneed an object key to edit Repository objects.418 © 2003 SAP AG. All rights reserved. 2003/Q3

Test Your Knowledge1. What are Support Packages and Add-Ons used for?Choose the correct answer(s).A To enter user data.B To import SAP object to maintain the system with a currentcorrection status. LC To implement additional functions in the system. LD To transport customer-developed programs.E To import preliminary corrections from SAP.2. Support Packages can be imported in any order.Determine whether this statement is true or false.TrueFalse L3. All SPAM/SAINT updates must always be imported.Determine whether this statement is true or false.TrueFalse L4. The queue for importing the SPAM update must be manuallyconfirmed.Determine whether this statement is true or false.True False L5. A prerequisite for importing a SPAM/SAINT update is that there areno aborted Support Packages in the system.Determine whether this statement is true or false.True False L6. You use transaction SNOTE SNOTE to import individual SAP Notes.Using the Note Assistant means that you are not queried for anobject key object key in the SAP Service Marketplace. SAP Notes thathave been imported using the Note Note Assistant do not require amodification adjustment with transaction SPAU SPAU.Fill in the blanks to complete the sentence.snote,2003/Q3 © 2003 SAP AG. All rights reserved. 455Test Your Knowledge TADM10Answers1. What are Support Packages and Add-Ons used for?Answer: B, CSupport Packages are not used to enter user data. Customerdevelopments are transported to other systems using transportrequests. Preliminary corrections are imported using the SAP NoteAssistant.2. Support Packages can be imported in any order.Answer: FalseSupport Packages must be imported in ascending order, withoutany gaps.3. All SPAM/SAINT updates must always be imported.Answer: FalseAll associated programs are always upgraded during theSPAM/SAINT update. It is therefore not necessary to follow anyparticular order.4. The queue for importing the SPAM update must be manually

confirmed.Answer: FalseIt is not necessary either to define a special queue, nor to confirmthis non-existent queue.5. A prerequisite for importing a SPAM/SAINT update is that there areno aborted Support Packages in the system.Answer: TrueThis is true, there must not be any aborted Support Packages in thesystem.456 © 2003 SAP AG. All rights reserved. 2003/Q3TADM10 Test Your Knowledge6. You use transaction SNOTE to import individual SAP Notes. Usingthe Note Assistant means that you are not queried for an object key inthe SAP Service Marketplace. SAP Notes that have been importedusing the Note Assistant do not require a modification adjustmentwith transaction SPAU.Answer: SNOTE, object key, Note, SPAUSNOTE is used to import individual SAP Notes, the modificationadjustment is performed with SPAU. It is also not necessary to enteran SSCR key.2003/Q3 © 2003 SAP AG. All rights reserved. 457

Test Your Knowledge1. A background job contains one or more steps steps. AnABAPprogram or an external external command or program can beexecuted in a step step of this type. A job can be triggered at aparticular time time or when a defined event event occurs.Fill in the blanks to complete the sentence.2. What status can a job have?Choose the correct answer(s).A RunningB ReleasedC WaitingD FinishedE ErrorF Active3. Which of the listed options for time-dependent scheduling of a jobcan be implemented with the standard resources of the SAP system?Choose the correct answer(s).A Daily at 1500B The second-last working day of every monthC Every nine days, but not on SundaysD Only tomorrow at 2355E Every year on April 1 at 08004. Which of the listed options for event-dependent scheduling of a jobcan be implemented with the standard resources of the SAP system?Choose the correct answer(s).A Whenever the system switches to the Night operation modeB AfterthejobJob1 has run successfullyC Whenever a particular event has been triggeredD Whenever the periodic job Job2 has run successfully2003/Q3 © 2003 SAP AG. All rights reserved. 507Test Your Knowledge TADM105. If one of the system.s ten background work processes is reserved forclass A jobs, and jobs are being processed in the other nine workprocesses, the reserved work process remains free even if a class A jobis waiting for execution.Determine whether this statement is true or false.True

False6. If a user has authorization to schedule an external program as a step ofa background job, he or she can run any operating system command.Determine whether this statement is true or false.TrueFalse508 © 2003 SAP AG. All rights reserved. 2003/Q3TADM10 Test Your KnowledgeAnswers1. A background job contains one or more steps. An ABAP program oran external command or program can be executed in a step of thistype. A job can be triggered at a particular time or when a definedevent occurs.Answer: steps, external, step, time, eventAfter the job is triggered, it is processed without interruption by asingle background work process.2. What status can a job have?Answer: B, D, FIn addition to the three correct answers, a job could have the statusScheduled, Ready, or Canceled.3. Which of the listed options for time-dependent scheduling of a jobcan be implemented with the standard resources of the SAP system?Answer: A, B, C, D, EAll of the options listed can be realized by default.4. Which of the listed options for event-dependent scheduling of a jobcan be implemented with the standard resources of the SAP system?Answer: A, B, COption D cannot be realized in the standard system. However,you can implement this as one of many additional possibilities byextending the standard system using function modules.5. If one of the system.s ten background work processes is reserved forclass A jobs, and jobs are being processed in the other nine workprocesses, the reserved work process remains free even if a class A jobis waiting for execution.Answer: FalseThe work processes that are reserved for class A jobs process class Ajobs. The option to reserve work processes for class A jobs shouldonly prevent all work processes being occupied with class B or C jobs.2003/Q3 © 2003 SAP AG. All rights reserved. 509Test Your Knowledge TADM106. If a user has authorization to schedule an external program as a step ofa background job, he or she can run any operating system command.Answer: TrueIf you do not want, as an administrator, to assign this criticalauthorization, but want to enable your users to run a specificoperating system command, you can define an external commandin the SAP system.510 © 2003 SAP AG. All rights reserved. 2003/Q3

Test Your Knowledge1. Which of the following access methods exist in the SAP system?Choose the correct answer(s).A RemoteprintingB Front end printingC Instance printingD Local printing2. Which of the listed states can a spool request have?Choose the correct answer(s).A Compl.B Canceled

C ErrorD WaitingE ActiveF Print.2003/Q3 © 2003 SAP AG. All rights reserved. 551Test Your Knowledge TADM10Answers1. Which of the following access methods exist in the SAP system?Answer: A, B, DInstance printing does not exist.2. Which of the listed states can a spool request have?Answer: A, C, D, FThe incorrect options canceled and active are possible status messagesfrom job monitoring. Other possible statuses of a spool request are -,+, Proc., <F5>, Problem, and Time.552 © 2003 SAP AG. All rights reserved. 2003/Q3

Test Your Knowledge1. How are authorizations assigned to a user?Choose the correct answer(s).A Users are assigned authorizations using profiles.B Users are assigned authorizations using roles.C Users are assigned authorizations using user names.D Users are assigned authorizations using a CertificationAuthority.2. The SAP authorization concept is a positive concept because ...Choose the correct answer(s).A every user automatically receives all authorizations.B authorizations must be explicitly assigned.C the range of features of the authorization check is so large.D the developers programmed it efficiently.3. System parameters for the user logon are in the area login login. Todisplay user.s incorrect logon attempts, call the Information Systemwith transaction SUIM SUIM. The system trace function is calledusing transaction ST01 ST01.Fill in the blanks to complete the sentence.2003/Q3 © 2003 SAP AG. All rights reserved. 589Test Your Knowledge TADM10Answers1. How are authorizations assigned to a user?Answer: A, BAuthorizations are combined into profiles. The roles assigned tousers contain profiles with appropriate authorizations for the role.Authorizations are not assigned using user names or a CA.2. The SAP authorization concept is a positive concept because ...Answer: BSAP uses a positive authorization concept. This means thateverything that is not explicitly allowed is automatically forbidden.3. System parameters for the user logon are in the area login. Todisplay user.s incorrect logon attempts, call the Information Systemwith transaction SUIM. The system trace function is called usingtransaction ST01.Answer: login, SUIM, ST01User logon settings are implemented using the login/* parameter.The Information System is called with transaction SUIM, the systemtrace function with ST01.590 © 2003 SAP AG. All rights reserved. 2003/Q3

Test Your Knowledge1. Which Remote Function Call procedures does an SAP systemprovide?Choose the correct answer(s).A synchronousRFCB reflexiveRFCC loopedRFCD transactional RFCE cut-throughRFCF queuedRFC2. Which RFC variant can you use to process work steps in parallel?3. To connect two SAP systems by RFC, you require anRFC interface RFC interface in each system (this automatically exists)and a defined RFC connection RFC connection from one system tothe other.Fill in the blanks to complete the sentence.2003/Q3 © 2003 SAP AG. All rights reserved. 609Test Your Knowledge TADM10Answers1. Which Remote Function Call procedures does an SAP systemprovide?Answer: A, D, FIn addition to the three correct answers (synchronous, transactional,and queued RFC), the system also provides asynchronous RFC andFastRFC.2. Which RFC variant can you use to processwork steps in parallel?Answer: You can use asynchronous RFC to process program steps inparallel, as long as there are work processes available in the system.3. To connect two SAP systems by RFC, you require an RFC interface ineach system (this automatically exists) and a defined RFC connectionfrom one system to the other.Answer: RFC interface, RFC connectionThe basic requirement is the RFC interface, which is in the protocolstack of every SAP system. You must also set up a connection fromthe calling system to the called system (transaction SM59).610 © 2003 SAP AG. All rights reserved. 2003/Q3

Test Your Knowledge1. What can alert monitoring be used for?Choose the correct answer(s).A Database backupB Updating dataC Monitoring the database and the SAP systemD Configuring and monitoring the firewall2. Why include remote systems in your alert monitoring?Choose the correct answer(s).A To transport program code from system to system.B To create a local connection to a database backup of remotesystemsC To be able to monitor these remote systems centrally.D To allow file sharing.E ToconnectanLDAPserver.3. What types of monitors are there in the SAP system?Choose the correct answer(s).A RuledmonitorsB Statistical monitorsC Rule-basedmonitorsD Static monitorsE Self-Repairing monitors

4. Properties variants are used to...Choose the correct answer(s).A Store user master dataB Customize transport requestsC Store CCMS alert monitoring settingsD Store combinations of parameters for calling an ABAPreport2003/Q3 © 2003 SAP AG. All rights reserved. 653Test Your Knowledge TADM10Answers1. What can alert monitoring be used for?Answer: CMonitoring objects are only monitored, not administered using alertmonitoring. The range of monitored is very large, since monitors canalso be created for .exotic. objects.2. Why include remote systems in your alert monitoring?Answer: CIncluding remote systems should allow you to monitor these systemscentrally.3. What types of monitors are there in the SAP system?Answer: C, DThere are static and rule-based monitors.4. Properties variants are used to...Answer: CCCMS alert monitoring settings are stored with properties variants654 © 2003 SAP AG. All rights reserved. 2003/Q3

Test Your Knowledge1. With which of the following transactions can you activate a trace forSQL statements in the SAP system?Choose the correct answer(s).A PerformancetraceB SystemlogC SystemtraceD Database performance analysis2. Which port does SAPLPD use under Microsoft Windows, by default?Choose the correct answer(s).A 007B 515C 516D 517E 815F The port defined by profile parameter rspo/port2003/Q3 © 2003 SAP AG. All rights reserved. 707Test Your Knowledge TADM10Answers1. With which of the following transactions can you activate a trace forSQL statements in the SAP system?Answer: A, CYou can analyze SQL statements by activating the trace in transactionST01 (system trace) or ST05 (performance trace). Transaction SM21(System Log) is the system log and ST04 (Database PerformanceAnalysis) is used to analyze database statistics.2. Which port does SAPLPD use under MicrosoftWindows, by default?Answer: BPort 515 is used by default.708 © 2003 SAP AG

Test Your Knowledge1. Evaluate the following statements.Choose the correct answer(s).A SAP* and DDIC are SAP users with no criticalauthorizations.B By default, user DDIC exists only in client 000.C HTTP, encrypted using SSL, is called HTTPS.D The ICM can accept encrypted connections.2003/Q3 © 2003 SAP AG. All rights reserved. 723Test Your Knowledge TADM10Answers1. Evaluate the following statements.Answer: B, C, DSAP* and DDIC certainly do have critical authorizations. The otherstatements are true.724 © 2003 SAP AG. All rights reserved. 2003/Q3

Test Your Knowledge1. Which of the following technology components can be used togetherwith an SAP R/3 Enterprise system?Choose the correct answer(s).A SAP Internet Transaction Server (SAP ITS)B Internet Communication Manager (ICM)C SAP J2EE Engine2. Which tools can you use to administer an SAP ITS?Choose the correct answer(s).A Commands at operating system levelB Transaction SITS in the SAP systemC ITS Administration toolD Microsoft Management Console with the SAP ITS Snap-In3. Which statement is correct?Choose the correct answer(s).A The ICM is implemented as a thread and is available for alarge number of operating systems.B You can use an instance profile parameter to configure howmany ICMs are started for each dispatcher.C SAP recommends that you operate a separate ICM for eachclient in an SAP system.D None of the above answers is correct.4. The ICM is relevant only for applications based on BSPs.Determine whether this statement is true or false.TrueFalse5. In which trace/log file can you identify whether the SAP J2EE Enginewas correctly started?Choose the correct answer(s).A dev_w0B dev_dispC dev_icmD sapstart.log2003/Q3 © 2003 SAP AG. All rights reserved. 801Test Your Knowledge TADM106. What are the names of the significant components that make up theSAP J2EE Engine?Choose the correct answer(s).A ClustersB DispatchersC ServersD WorkProcesses

E ICM7. Which statement(s) is/are correct?Choose the correct answer(s).A The SAP Web dispatcher stores system information in asmall local database.B The SAP Web dispatcher knows the capacity of allapplication servers in the SAP system.C The SAP Web dispatcher makes a firewall superfluous.D The SAP Web dispatcher communicates with the messageserver.802 © 2003 SAP AG. All rights reserved. 2003/Q3TADM10 Test Your KnowledgeAnswers1. Which of the following technology components can be used togetherwith an SAP R/3 Enterprise system?Answer: A, B, CAll of the above. The SAP ITS can be used with any SAP system (asof SAP Basis 3.1G). The technical foundation of SAP R/3 Enterpriseis SAP Web AS 6.20 - for which the ICM and SAP J2EE Engine canbe configured.2. Which tools can you use to administer an SAP ITS?Answer: A, CThere are various programs at operating system level after an SAPITS installation that you can use to administer an SAP ITS. Thebrowser-based ITS Administration tool, with which you can alsomonitor remote SAP ITS instances, is easier to use.3. Which statement is correct?Answer: DAll of the answers provided are incorrect. The ICM is a process(which internally consists of multiple threads) that is available for alloperating systems supported by SAP. You can use a profile parameterto configure either no ICM or one ICM for each SAP instance (andtherefore for each dispatcher). Scaling is performed using the settingsfor the number of threads and memory allocation.4. The ICM is relevant only for applications based on BSPs.Answer: FalseExecuting BSP applications requires the ICM. However, there arealso other applications (Web services such as SOAP/XML or Webreporting with the SAP BW), that use the ICM and ICF but do notuse BSPs). Thanks to the ICM and ICF, the SAP Web AS can alsoperform the role of Web client and can process other protocols suchas SMTP in addition to HTML.2003/Q3 © 2003 SAP AG. All rights reserved. 803Test Your Knowledge TADM105. In which trace/log file can you identify whether the SAP J2EE Enginewas correctly started?Answer: BThe file in which the system logs whether the SAP J2EE Engine hasbeen started is dev_disp. The dispatcher starts the SAP J2EE Engine.Therefore the information is stored in the dev_disp file. sapstart.log isthe log file for the start process of an SAP system. dev_w0 is the tracefile for a dialog work process, and dev_icm is the trace file for theInternet Communication Manager (ICM) process.6. What are the names of the significant components that make up theSAP J2EE Engine?Answer: B, CThe SAP J2EE Engine consists of one or more dispatchers and servers.Work processes are only used in the .standard. SAP environment,and the ICM is the new process in SAP Web AS 6.10. A cluster issimply a term for whether you are working with multiple servers and

dispatchers with the SAP J2EE Engine.7. Which statement(s) is/are correct?Answer: B, DThe SAP Web dispatcher communicates with the message server byHTTP(S) to obtain information about the available application servers(which includes their capacity). Although the SAP Web dispatchercan act as a URL filter, it does not replace the function of a firewall.Only requests that are addressed to the configured port of the SAPWeb dispatcher are processed.804 © 2003 SAP AG. All rights reserved. 2003/Q3

Test Your Knowledge1. Which statements are correct with regard to globalization?Choose the correct answer(s).A The logon language for the SAP system is determined bythe country version.B A country version must always be imported as an add-onbefore it can be used.C Time zones can be attached to a user master record or anobject.D The time zone from the user master record is taken intoaccount in all SAP Basis/SAP Web AS transactions.E Before time zones can be used, theymust be defined in thesystem, together with any daylight saving time definition.F A global company must essentially be mapped as a singleclient in a single SAP system, as otherwise no integratedbusiness processes are possible.2. What must be taken into account when importing an additionallanguage into an SAP system?Choose the correct answer(s).A After the actual import of the language package,language-dependent texts from Support Packages thathave already been imported must also be imported usingtransaction SMLT.B The Support Packages that had been imported into theSAP system at the time of the language import must becompletely imported again using transaction SPAM.C Languages that are not completely translated require asupplementation language to fill translation gaps.D All available languages are already available in the databaseof the SAP system and you must now use transaction SMLTto make them known in the system.E You can use transaction SMLT to perform the languageimport in parallel using multiple R3trans processes.2003/Q3 © 2003 SAP AG. All rights reserved. 857Test Your Knowledge TADM103. Which statements are correct with regard to code pages?Choose the correct answer(s).A Every language requires a separate, individual code page.B Multiple code pages can be operated simultaneously on aninstance in one client in an SAP system.C With Unicode, all characters that are relevant for businesscan be mapped in one single code page. MDMP is thenno longer required.D During an upgrade from SAP R/3 4.x to SAP WebAS 6.20/SAP R/3 Enterprise, an SAP R/3 system isautomatically converted to Unicode. This is known asUnicode migration (Unicode Switch Upgrade).E With MDMP, one character is basically represented by one

byte.F Unicode uses two bytes to represent every character.858 © 2003 SAP AG. All rights reserved. 2003/Q3TADM10 Test Your KnowledgeAnswers1. Which statements are correct with regard to globalization?Answer: C, ECentralized and decentralized system configurations with theirhybrid forms, country versions, and time zones are some aspects thatmust be considered with a global system.2. What must be taken into account when importing an additionallanguage into an SAP system?Answer: A, C, EYou can use transaction SMLT to import additional languages withlanguage-dependent texts into an SAP system. You do not need toreimport Support Packages using transaction SPAM; the SupportPackages are handled using transaction SMLT.3. Which statements are correctwith regard to code pages?Answer: B, CIf you use MDMP, multiple code pages can be operatedsimultaneously in one instance of an SAP system. If you use Unicode,characters are stored with a length of up to four characters.2003/Q3 © 2003 SAP AG. All rights reserved. 859Unit 23: Globalization TADM10860 © 2003 SAP AG. All rights reserved. 2003/Q3

Test Your Knowledge1. Which of the following statements regarding SAPconnect are correct?Choose the correct answer(s).A As of SAPWeb AS 6.10, aMicrosoft Exchange Infrastructuremust be set up outside the SAP system to be able to sendmail from SAP systems.B It is not possible to connect the UNIX-based sendmail toSAP systems.C SAPconnect allows you to send mail both by RFC and theSMTP plug-in of the SAP Web AS.D SAPconnect is configured cross-client.E A send process automatically runs periodically in everySAP system after the system installation.2. The connection of a mail server to an SAP system to send e-mailsusing SMTP from the SAP system runs through an SAPconnect node.Determine whether this statement is true or false.TrueFalse3. How can the SAP system be connected with telephone equipment inthe context of SAPphone?Choose the correct answer(s).A Using a Computer Telephony Integration (CTI) gatewayfrom a third-party vendorB The connection is made automatically using Customizingsettings in the SAP systemC Using the Telephony API (TAPI) interface with a TAPIService Provider and a SAPphone ServerD Using none of the above2003/Q3 © 2003 SAP AG. All rights reserved. 905Test Your Knowledge TADM10Answers1. Which of the following statements regarding SAPconnect are correct?Answer: C

There are two ways to send mail in SAPconnect: by RFC connectionor using the SMTP plug-in of the SAP Web AS. The other statementsare incorrect.2. The connection of a mail server to an SAP system to send e-mailsusing SMTP from the SAP system runs through an SAPconnect node.Answer: TrueTo configure a send process for SMTP in the SAP system, you must,among other things, also have configured and activated an SMTPnode using transaction SCOT (SAPconnect).3. How can the SAP system be connected with telephone equipment inthe context of SAPphone?Answer: A, CThe connection between the SAP system and the telephone equipmentis made using a CTI server. This can either be implemented usinga CTI gateway from a third-party vendor or the TAPI interface inconnection with a SAPphone server.906 © 2003 SAP AG. All rights reserved.

Test Your Knowledge1. Which possibilities does eCATT provide?Choose the correct answer(s).A Performing centrally stored test cases on different targetsystemsB Testing SAP transactions regardless of whether they use theControl Framework or notC Testing transactions in the SAP GUI for HTML and testingBusiness Server PagesD Testing function modules2. There is a fixed connection between the test data required for aneCATT test case and the test script, and the data cannot be usedwithout this fixed test script.Determine whether this statement is true or false.TrueFalse3. Which statements about the relationship between system datacontainers and test scripts are true?Choose the correct answer(s).A A system data container is always associated with onlyone test script.B Multiple test scripts can access the same system datacontainer.C Each entry in the system data container must also appear inthe test script at least once.D Only systems that are entered in an associated system datacontainer can be accessed from a test script.4. Which eCATT driver is suitable for recording and running SAPtransactions that run in SAP GUI for Windows?Choose the correct answer(s).A SAPGUIB FUNC TCDD WINGUI2003/Q3 © 2003 SAP AG. All rights reserved. 945Test Your Knowledge TADM10Answers1. Which possibilities does eCATT provide?Answer: A, B, C, DYou can use eCATT to perform cross-system tests. Unlike CATT, youcan also test function modules and SAP transactions that use the

Control Framework. It is also possible to test applications in theSAP GUI for HTML or BSPs and JSPs using an interface to externaltest tools.2. There is a fixed connection between the test data required for aneCATT test case and the test script, and the data cannot be usedwithout this fixed test script.Answer: FalseIn eCATT, the test data used for the test is stored independently of afixed test script in test data containers. This allows the same test datato be reused in different test cases with different test scripts.3. Which statements about the relationship between system datacontainers and test scripts are true?Answer: B, DBoth test scripts and system data containers are defined in the contextof a test configuration. The test configuration links the initiallyindependent objects system data container and test script. This has theadvantage that system data containers can be reused; that is, multipletest scripts can access the same system data container. System datacontainers can contain more system entries than are required in thetest script; however, only systems that are defined in the system datacontainers can be accessed from test scripts.4. Which eCATT driver is suitable for recording and running SAPtransactions that run in SAP GUI for Windows?Answer: A, CYou can use the SAPGUI and TCD drivers for recording and runningSAP transactions that run in the SAP GUI for Windows (or in the SAPGUI for Java). If the transaction does not use the Control Framework,we recommend that you use TCD; otherwise, the SAPGUI driveris required. The FUN driver is used for testing function modules.WINGUI is an imaginary name in this context.946 © 2003 SAP AG. All rights reserved.

Test Your Knowledge1. Which of the following statements with regard to Central UserAdministration are correct?Choose the correct answer(s).A CUA can be implemented as of SAP R/3 4.0B.B Only SAP R/3 systems can be linked to a CUA.C CUA uses an ALE setup.D The clients linked by CUA are called logical systems.E The clients linked with the CUA are known as the centralsystem and child systems.2. Which of the following statements about logical systems are correct?Choose the correct answer(s).A Logical systems are defined cross-client.B The IDs of logical systems can be assigned to clients.C The naming convention for logical systems is LOGSYS###,where ### corresponds to a client ID.D Multiple logical system IDs can be assigned to a client.E In the context of a CUA, the clients involved are addressedas logical systems.3. Which of the following statements about the required RFCconnections in a CUA are correct?Choose the correct answer(s).A The RFC connections must be specified entirely inuppercase letters and must be identical to the name of theaddressed logical system.B The user in the RFC connection must be a dialog user.

C An RFC connection from the child system to itself isrequired.D An RFC connection from the central system to itself isrequired.E Certain roles for the communication users are requiredonly during CUA setup, and can then be removed fromtherelevant user master records.2003/Q3 © 2003 SAP AG. All rights reserved. 1041Test Your Knowledge TADM104. With which methods is it possible to create users in child systemsin the context of an active CUA?Choose the correct answer(s).A In the child system with transaction SU01, Systems tab pageB In the central system with transaction SU01, Systems tabpage.C In the central system with transaction PFCGD In the child system with transaction PFCGE In the central system with transaction SU01, Roles tab page5. Directory services can only be used as a repository for informationabout users.Determine whether this statement is true or false.TrueFalse6. Which prerequisites must be fulfilled on the SAP side to use an SAPWeb AS with a directory server?Choose the correct answer(s).A Host Name and Port Number of the directory server aremaintained under Connection Data.B In user maintenance (transaction SU01), there is a user oftype System, that has read and write authorization for thedirectory server.C The operating system program ldap_rfc is running on thehost, on which the Directory Server is running.D The names of the RFC destination and the associatedConnector definition are identical.7. During a synchronization process, data can be simultaneouslyimported and exported for a user.Determine whether this statement is true or false.TrueFalse1042 © 2003 SAP AG. All rights reserved. 2003/Q3TADM10 Test Your KnowledgeAnswers1. Which of the following statements with regard to Central UserAdministration are correct?Answer: C, D, EThe CUA clients linked by ALE are known as the central system andchild systems, and as logical systems. You can connect SAP systems to aCUA if they have at least SAP Basis 4.5B or an SAP Web AS.2. Which of the following statements about logical systems are correct?Answer: A, B, EThe table that contains the IDs of the logical systems is across-client table. Each ID is assigned to exactly one client, and therecommendation for the naming convention is <SID>CLNT###. Theclients involved in a CUA require a unique assignment to a logicalsystem.3. Which of the following statements about the required RFCconnections in a CUA are correct?Answer: A, D, EThe names assigned to the RFC connections used must be identical

to the names of the logical systems, that is, also in uppercaseletters. The user behind the RFC connection should be of the typeCommunication. The central system requires an RFC connection toitself. The communication users require a number of authorizationsonly to create the CUA; the corresponding roles can be removed fromthe user master records after the setting up of the CUA is completed.4. With which methods is it possible to create users in child systemsin the context of an active CUA?Answer: B, EIf you are using a CUA, you can only create users in child systemsusing transaction SU01 in the central system. The creation of users ispossible using the Systems, Roles, and Profiles tab pages.2003/Q3 © 2003 SAP AG. All rights reserved. 1043Test Your Knowledge TADM105. Directory services can only be used as a repository for informationabout users.Answer: FalseThanks to flexible data model, data about any objects (such ashardware resources or documents) can be stored in directory services. although their use for user information is particularly widespread.6. Which prerequisites must be fulfilled on the SAP side to use an SAPWeb AS with a directory server?Answer: A, DIn the SAP system, the RFC destination used and the LDAP Connectormust bemaintained with the same name (in uppercase letters).The operating system program ldap_rfc can then be started on theselected application server of the SAP system . while the directoryserver(s) addressed can run on remote servers (without ldap_rfc).Additional Customizing includes the definition of a system user andthe connection data, including the host name and port number ofthe directory server.The LDAP system user is stored in Customizing for the directoryservice connection and has nothing to do with the SAP usersmaintained in transaction SU01.7. During a synchronization process, data can be simultaneouslyimported and exported for a user.Answer: TrueThe synchronization indicators do not need to be identical forall mappings. It is therefore entirely possible that, for example,SAP-specific data (such as role assignments) is exported during asynchronization process, while other data (such as a fax number) isimported.1044 © 2003 SAP AG. All rights reserved. 2003/Q3

12:44 p.m.

Print All1

Documents

Transcript of Print All1