“Principal ON Teach the Teachers on CNC Technologydte.kar.nic.in/Circulars/CDC/JSS...
Transcript of “Principal ON Teach the Teachers on CNC Technologydte.kar.nic.in/Circulars/CDC/JSS...
JSS MAHAVIDYAPEETHA
JSS Academy of Technical EducationBangalore - 560060
JSS Academy of Technical EducationBangalore - 560060
Faculty Development Program On
Name: ________________________________
Designation:___________________________
Department:___________________________
Institution Address:______________________
_____________________________________
_____________________________________
Phone/Mobile:__________________________
Fax:__________________________________
Email:________________________________
Certified hereby that Dr./Mr./Mrs._______
________________________________will
be permitted to attend the above course to be
held at JSS Academy of Technical Education,
Bangalore from 29th April to 4th May, 2013.
Signature of Head of Institution/Department
Payment Details:
Registration Fee
Important Information
Address for Correspondence
Certificate
D D No:______________Date:____________
Amount in Rs._________Drawn at__________
Date: Signature of applicant
“Teach the Teachers on CNC Technology”29th April to 4th May, 2013
The application should be accompanied by
registration fee. Last date for the submission
of application is Confirmation of
selection to participants shall be intimated on
by e-mail
20.04.2013.
25.04.2013
The registration fee for faculty from AICTE
recognized institutions and research scholars is
Rs. 1000/-, and for working professionals from
industry is Rs. 2000/-.
The payment should be made by a crossed
demand draft drawn in favour of
payable at Bangalore.
No TA & DA will be provided to the participants.
“Principal
JSSATE”
Mr. B V RAGHAVENDRA
Program Coordinator & Asst. Professor,
Dept. of Mechanical Engineering,
JSS Academy of Technical Education,
JSS Campus, Uttarahalli-Kengeri Road,
Mylasandra, Bangalore-560060.
Ph No: 09481776070, 09731387331
080-28612706
Website: www.jssateb.ac.in
E-mail:[email protected]
Fax No: 080-28612706, 28612646
FACULTY DEVELOPMENT PROGRAM
ON
Teach the Teachers on CNC Technology29th April to 4th May, 2013
Organized by
Bangalore–60
DEPARTMENT OF MECHANICAL ENGINEERING
JSS ACADEMY OF TECHNICAL EDUCATION
in association with
Convenor
Dr. B P SHIVAKUMARProf. & Head, Dept. of Mechanical Engineering
JSS ACADEMY OF TECHNICAL EDUCATION, Bangalore–60
CADEM TECHNOLOGIES PVT. LTD.,
&
Bangalore
BelgaumVISVESVARAYA TECHNOLOGICAL UNIVERSITY,
MICROMATIC MACHINE TOOLS PVT. LTD., Bangalore
About the Institution
Course Objective
Resource Faculty
Eligiblity
Course Contents
Venue
About the Department
About Micromatic Machine Tools
About CADEM Technologies
JSS Academy of Technical Education, Bangalore isa premier educational institution run by the JSSMahavidyapeetha, Mysore. The Mahavidyapeethashelters over 350 institutions, both at home andabroad. The JSSATE campus is spread over 21acres of land surrounded by lush green plantationon the south western part of Bangalore city. Theinstitution established in 1997 conducts sevenunder-graduate programmes, four post-graduateprogrammes in VLSI, MEM, PDM and MBA. Thewhole campus is networked and has centralizedbrowsing facility with 4MBPS dedicated internetbandwidth with ISDN backup and Wi-Fi facility.The departments of Mechanical Engineering, IEM,Instrumentation Technology & MBA are recognizedresearch centres under VTU, Belgaum. Theinstitution also houses an Advanced JewelleryDesign Technology Centre and Product LifecycleManagement Competency Centre in technicalcollaboration with Dassault Systemes France,Ministry of Education, France and JSSMahavidyapeetha, Mysore.
The Department of Mechanical Engineering wasestablished in 2004 with an intake of 60 studentsaffiliated to VTU, Belgaum and is recognized byAICTE, New Delhi. The department has qualifiedand experienced teaching faculty with state of theart infrastructure, and modern teaching aidscatering to the needs of VTU curriculum. It alsohas a Research and Development Centrerecognized by VTU, Belgaum.
M/s. Micromatic Machine Tools & its group, is arenowned manufacturer of an array of productssuch as Turning Machines, Milling Machines,Grinding Machines, Automation Machines andProductivity Solutions Machines. They develophighly quality products by using best raw materialsto fulfill the market demand.
M/s. CADEM Technologies Pvt. Ltd, Bangalore wasstarted in 1989 & has a range of products formonitoring and improving the productivity ofmanufacturing industries, programming andprogram transfer for CNC machines and training
on CNC machining technology. All products aredesigned and developed by CADEM Technologiesinhouse. CADEM Technologies are pioneers indeveloping and marketing of CNC turning andmilling simulation software. Many technicalinstitutes in India and abroad use CADEM productsto study CNC programming and Computer AidedProgramming as part of their syllabus.
The main objective of this program is to enlighten
the participants on the teaching methodology and
hands on experience for CNC turning, CNC milling
and simulation software. This course helps to
acquire insight into the subject and create interest
in students of engineering. Another objective is to
motivate the faculty to pursue higher studies and
research in the field of CNC machines.
We also recognize recent trend in the industry of
an upsurge requirement for the engineers to face
the global challenges in the productivity. An
efficient knowledge of CNC machines and the
programming concepts will enhance the
potentiality of the engineer to face the global
challenges in the manufacturing industry for
improving productivity. There is a renewed need
for quality engineers with sound knowledge of
machines and CNC programming. This course will
equip the faculty to train their students to meet
the challenges of the growing aerospace and
automobile sectors. Department of Mechanical
Engineering, JSSATE has launched an initiative in
this direction to organize the event through this
course.
The course content is designed to impart
knowledge on CNC turning & milling operations
like simple turning, step turning, taper, profile,
thread cutting, grooving, internal machining,
surface milling, side milling, drilling, counter bore,
tapping, pocketing, etc., using CADEM software.
The resource personalities for the course are from
M/s. Micromatic Machine Tools and M/s. CADEM
Technologies having vast knowledge and
experience on CNC Technologies.
Teachers from AICTE recognized engineering
colleges, Polytechnics, research scholars working
in R&D organizations and working professionals
from industries in the relevant field are eligible to
apply for participation.
SEMINAR HALLJSS Academy of Technical Education,JSS Campus, Uttarahalli-Kengeri Road
Mylasandra, BANGALORE - 560060
Chief Patron
Patrons
Advisory Committee
His Holiness Jagadguru Sri Sri Sri
Shivarathri Deshikendra Mahaswamigalavaru
Jagadgurugalu, Veerasimhasana Mutt
Sutturu Srikshetra
Sri B N Betkerur
Executive Secretary, JSSMVP, Mysore.
JSSMVP, Mysore.
Prof. M H Dhananjaya
Director (TED),
Dr. B T Nijaguna
Dr. Mrityunjaya V Latte
Prof. Emeritus & Advisor, JSSATE, Bangalore.
Principal, JSSATE, Bangalore.
Organising Committee
Dr. Shankargoud N,
Mr. Suresh Holi,
Mr. K M Nataraj,
Mr. H Prakash,
Mr. K S Anil Kumar,
Mr. M Mruthunjaya,
Mr. T K Nagaraj,
Mr. Sreekantamurthy,
Mr. B N Venkatesh,
Mr. Devappa,
Mr. G M Swamy,
Mr. P N Siddappa,
Associate Professor
Assistant Professor
Assistant Professor
Assistant Professor
Assistant Professor
Assistant Professor
Assistant Professor
Assistant Professor
Assistant Professor
Assistant Professor
Assistant Professor
Assistant Professor