Primed and Treated Radiata Pine PRODUCT AND PROFILE GUIDE… · Check profile and length...
Transcript of Primed and Treated Radiata Pine PRODUCT AND PROFILE GUIDE… · Check profile and length...
2
Woodhouse Weatherproof®
Woodhouse Weatherproof® is a range of eco-friendly, timber building products manufactured for outdoor use in all structural and decorative applications. Supplied with a genuine Industrial Pink
Primer, every Woodhouse Weatherproof® product is ready for installation and final top coatings. Manufactured by finger jointed defect-free, 100% New Zealand radiata pine, all Woodhouse Weatherproof® is available in a range of lengths and profiles to service current building practices and designs.
Chemically treated using an organic H3 LOSP preservative for resistance against termite and fungal attack, the Woodhouse Weatherproof® range is a ready to use building product intended for use in Australia’s toughest conditions. When installed and maintained according to correct building practices, it offers a long term building solution for all outdoor construction.
WarrantiesWe stand by our products offering a 25 warranty against fungal decay and termite attack on the Woodhouse Weatherproof® range. Chemically treated with an APVMA registered light organic solvent preservative (LOSP), it provides
genuine peace of mind. It is also factory primed with Woodhouse Weatherproof® pink (PPG-Taubmans) and if painted with the recommended top coats, there is a 10-15 year guarantee against blistering, peeling and flaking of the finish coat.
Quality AssuredWoodhouse Weatherproof® timber suppliers are audited to ensure compliance with a production system that meets the requirements of the Engineered Wood Products Program.
The scope of the certification includes compliance with the AsureQuality Programme for finger joint and glue laminated standards.
Our suppliers are also audited as part of the PineNZ certification. PineNZ mark is awarded to New Zealand manufacturers who have undergone a tough independent audit to ensure that their manufacturing processes and procedures meet key Australian and New Zealand standards.
All Woodhouse Weatherproof® branded products are end tagged to permit the correct selection for final use. Details such as the relevant Australian Standards; Adhesive type; and Structural Grading (if applicable) are indicated clearly on the product tags.
SustainabilityWoodhouse Timber Company is committed to sustainability and responsible timber practices.
By choosing Woodhouse timber, you help take care of the world’s forests. Radiata pine is grown in New Zealand as an exotic species from the Monterey peninsular in California. The Resource Management Act 1991 places several requirements on forest growers, including the need to consider employment, social, cultural and environmental impacts. This results in a level of environmental responsibility that does not exist in other countries.
Most plantation forest owners have adopted the New Zealand Forest Owners’ Environmental Code of Practice for Plantation Forestry (2007). The code of practice covers areas including the protection of waterways, endangered species, historical sites, sediment control and the management of fuel, oil and wastes. Afforestation with Radiata pine rehabilitates previously farmed soils by reducing compaction caused by stock, with soil condition improving with subsequent rotations.
All Woodhouse Weatherproof® timber comes primed on pre-primed and treated. Any cut ends or penetration points must be re-sealed and primed as part of the building and construction process. Material safety data
sheet and span tables are available for download from the Woodhouse website. Please refer to the National Construction Code guidelines or your local building authority to ensure correct construction practices are followed.
Operating for over 35 years, Woodhouse Timber Company is an Australian owned and operated business established and run by the Woodhouse family. Built on the foundations of quality products and excellent customer service, it has
grown from its warehouse in Brisbane to a national operation with branches and representation across Australia. It is the trusted and premier wholesaler of exterior and interior timber products.
3
Handrail ComponentsExternal Door JambsStructural F7 and GL8
Laminated Beams and Posts
Cladding and Lining Boards
ScreeningDressed All Round (DAR)
Fascia and Barge BoardsFencing
Handrail Components and Balustrades 4Fascia and Barge Boards 5GL8 Laminated Beams and Posts 6Structural F7 7External Door Jambs 8
Dressed All Round (DAR) PR4 9Dressed All Round (DAR) 9Cladding and Lining Boards 10Architraves and Mouldings (Exterior and Interior) 11CONTACT DETAILS 12
4
Handrail Components and Balustrades
Check profile and length availability with your state sales office. Certain product lengths may not be ranged as standard and may be available as special order.Note: Profiles illustrated are not to scale.
LENGTH 5.4M
EH1 EH2 EH3 EH4 EH19
19mm
42mm
19mm
42mm
EBR2 EBR3 EBR4 EBR7
19mm
F706642 FJ04218PR4TP EB4231 EB42 EB62
EH21
20mm
43mm
QLD NSW/ACT VIC/TAS SA WAHANDRAILEH1 66 x 66 Breadloaf - Rebated •EH2 66 x 66 Breadloaf - Non Rebated •EH3 66 x 66 Ladies Waist - Rebated • •EH4 66 x 66 Ladies Waist - Non Rebated •EH19 85 x 42 Dressed All Round (DAR) - Rebated •EH20 85 x 42 Ladies Waist - Rebated • • • • •EH21 66 x 42 Ladies Waist - Rebated •BOTTOM RAILEBR1 66 x 32 Rebated - 42 x 8 •EBR2 66 x 32 To suit 19mm Balustrade •EBR3 66 x 42 To suit 42mm Balustrade • • • •EBR4 66 x 42 To suit 19mm Balustrade • • • • •EBR9 88 x 42 Rebated •MID RAILEBR7 66 x 42 Mid Rail - Rebated • • • • •F706642 66 x 42 F7 Mid Rail •BALUSTRADEFJ04218PR4TP 42 x 18 Balustrade • • • • •EB4231 42 x 31 Balustrade • • • •EB42 42 x 42 Balustrade • • • • •EB62 62 x 19 Balustrade • •
EH20
EBR1
EBR9
19mm
42mm
5
Fascia and Barge Boards
QLD NSW/ACT VIC/TAS SA WATRADITIONALF1 180 x 25 3.6, 4.8, 5.4, 6.0 ,7.2F2 188 x 30 6.0 3.6, 4.8, 5.4, 6.0, 7.2F5 210 x 30 6.0F6 230 x 30 3.6, 4.8, 5.4, 6.0, 7.2 3.6, 4.8, 5.4, 6.0, 7.2F2WA18830 180 x 30 3.6, 4.8, 5.4, 6.0, 7.2BULLNOSE F3 180 x 19 3.6, 4.8, 5.4,
6.0, 7.2F4 180 x 25 3.6, 4.8, 5.4,
6.0, 7.2F8 230 x 25 3.6, 6.0TIGHT KNOT GRADE - PRIMED AND GROOVEDFTK18830 188 x 30 3.6, 4.2, 4.8, 5.4,
6.0, 6.6, 7.23.6, 4.8, 5.4, 6.0 , 7.2
FTK23030 230 x 30 3.6, 4.8, 5.4, 6.0 ,7.2
FTKWA18830 188 x 30 3.6, 4.8, 5.4, 6.0 ,7.2
Tight knot and non grooved barge boards are available in F7 structural range (F7 185 x 30, F7 230 x 30 and F7 280 x 30).
25mm
180mm
30mm
188mm
30mm
210mm
30mm
230mm
30mm
F1 F
asci
a
F2 F
asci
a
F5 F
asci
a
F6 F
asci
a
185mm
230mm
280mmF1 F2 F2WA18830 F5
F6 F3 F4
FTK18830 FTK23030
LENGTH (LM) AVAILABLE
FTKWA18830
F8
Check profile and length availability with your state sales office. Certain product lengths may not be ranged as standard and may be available as special order.Note: Profiles illustrated are not to scale.
6
GL8 Laminated Beams and Posts
QLD NSW/ACT VIC/TAS SA WAPOSTSGL806666 66 x 66 5.4GL808866 88 x 66 5.4GL808888 88 x 88 2.4, 2.7, 3.0, 3.6,
4.8, 5.4, 6.02.4, 2.7, 3.0, 3.6, 4.2, 4.8, 5.4, 6.0, 7.2
2.4, 2.7, 3.0, 3.6, 4.8, 5.4, 6.0
2.4, 2.7, 3.0, 3.6, 4.8, 5.4, 6.0
2.4, 2.7, 3.0, 3.6, 4.8, 5.4, 6.0
GL8112112 112 x 112 2.4, 2.7, 3.0, 3.6, 4.8, 5.4, 6.0
2.4, 2.7, 3.0, 3.6, 4.8, 5.4, 6.0, 7.2
2.4, 2.7, 3.0, 3.6, 4.8, 5.4, 6.0
2.4, 2.7, 3.0, 3.6, 4.8, 5.4, 6.0
2.4, 2.7, 3.0, 3.6, 4.8, 5.4, 6.0
GL8135135 135 x 135 2.4, 2.7, 3.0, 3.6, 4.8, 5.4, 6.0
2.4, 2.7, 3.0, 3.6, 4.8, 5.4, 6.0, 7.2
2.4, 2.7, 3.0, 3.6, 4.8, 5.4, 6.0
2.4, 2.7, 3.0, 3.6, 4.8, 5.4, 6.0
2.4, 2.7, 3.0, 3.6, 4.8, 5.4, 6.0
BEAMSGL814065 140 x 65 3.6, 4.8, 5.4,
6.0 ,7.2GL818065 180 x 65 5.4 3.6, 4.8, 5.4,
6.0 ,7.24.8, 5.4 3.6, 5.4, 6.0, 7.2 4.8, 5.4, 6.0, 7.2
GL824065 240 x 65 5.4 4.8, 5.4, 6.0 ,7.2 5.4, 6.0, 7.2 3.6, 5.4, 6.0, 7.2 4.8, 5.4, 6.0, 7.2GL828065 280 x 65 4.8, 5.4, 6.0 ,7.2 5.4, 6.0, 7.2 3.6, 5.4, 6.0, 7.2 4.8, 5.4, 6.0, 7.2
Check profile and length availability with your state sales office. Certain product lengths may not be ranged as standard and may be available as special order.Note: Profiles illustrated are not to scale.
GL8135135
GL8112112
GL808888
GL808888, GL806666,GL808866
GL8112112 GL8135135
For above ground use
Store in dry environment and support every 600mm prior to installation
Use with compatible handrail components
Use best building practices
Pre-primed and treated. Seal cut ends and penetration points with wood preservative and primer
GL814065 GL818065 GL824065 GL828065
LENGTH (LM) AVAILABLE
7
F723042F718542 F728042
Structural F7
F706630 F713830
F709042
QLD NSW/ACT VIC/TAS SA WAF706630 66 x 30 5.4 5.4, 6.0 5.4 5.4 5.4F709030 90 x 30 5.4 5.4, 6.0 5.4 5.4 5.4F713830 138 x 30 5.4, 6.0 3.6, 5.4 5.4, 6.0 5.4F718530 185 x 30 5.4, 6.0 5.4, 6.0 5.4, 6.0 3.6, 4.8, 6.0, 7.2 5.4, 6.0F723030 230 x 30 6.0 5.4, 6.0 6.0 3.6, 4.8, 6.0, 7.2 6.0, 7.2F728030 280 x 30 6.0 5.4, 6.0 6.0 6.0 6.0F706642 66 x 42 5.4 5.4, 6.0 3.6, 5.4, 6.0 5.4, 6.0 5.4F709042 90 x 42 3.6, 5.4, 6.0 3.6, 4.8, 5.4, 6.0 3.6, 4.2, 4.8, 5.4, 6.0 3.6, 4.8, 5.4, 6.0 3.6, 4.8, 5.4, 6.0F713842 138 x 42 3.6, 4.8, 5.4, 6.0 3.6, 4.2, 4.8, 5.4,
6.0, 7.23.6, 4.2, 4.8, 5.4, 6.0, 7.2
3.6, 4.2, 4.8, 5.4, 6.0, 7.2
3.6, 4.2, 4.8, 5.4, 6.0, 7.2
F718542 185 x 42 3.6, 4.8, 5.4, 6.0 3.6, 4.2, 4.8, 5.4, 6.0, 7.2
3.6, 4.2, 4.8, 5.4, 6.0, 7.2
3.6, 4.2, 4.8, 5.4, 6.0, 7.2
3.6, 4.2, 4.8, 5.4, 6.0, 7.2
F723042 230 x 42 5.4, 6.0, 7.2 4.8, 5.4, 6.0, 7.2 3.6, 4.2, 4.8, 5.4, 6.0, 7.2
4.8, 5.4, 6.0, 7.2 3.0, 3.6, 4.2, 4.8, 5.4, 6.0, 7.2
F728042 280 x 42 4.8, 5.4, 6.0, 7.2 3.6, 4.2, 4.8, 5.4, 6.0, 7.2
4.8, 5.4, 6.0, 7.2 3.0, 3.6, 4.2, 4.8, 5.4, 6.0, 7.2
LENGTH (LM) AVAILABLE
F709030
F723030F718530 F728030
F706642 F713842
138mm
230mm
185mm
138mm
66mm
280mm
185mm
66mm
90mm
230mm
90mm
30mm 42mm
280mm
Check profile and length availability with your state sales office. Certain product lengths may not be ranged as standard and may be available as special order.Note: Profiles illustrated are not to scale.
8
External Door Jambs
QLD NSW/ACT VIC/TAS SA WANON REBATEDEJ01/5.2 112 x 30 •EJ02/5.2 140 x 30 • •EJ04/5.2 163 x 30 •REBATEDEJ03/5.2 140 x 30 • • •EJ05/5.2 163 x 30 • •DOUBLE REBATED - ONE FACEEJ06/5.2 140 x 30 • • •EJ07/5.2 163 x 30 • •
EJ01 and EJ02
EJ03
EJ04
EJ05
EJ06
EJ07
EJ01 EJ02 EJ04
EJ03 EJ05
EJ06 EJ07
Check profile and length availability with your state sales office. Certain product lengths may not be ranged as standard and may be available as special order.Note: Profiles illustrated are not to scale.
LENGTH 5.2M
9
Dressed All Round (DAR) PR4
QLD NSW/ACT VIC/TAS SA WAFJ04218PR4TP 42 x 18 • • • • •FJ06618PR4TP 66 x 18 • • • • •FJ09218PR4TP 92 x 18 • • • • •FJ11018PR4TP 110 x 18 • •FJ11618PR4TP 116 x 18 • • • • •FJ13818PR4TP 138 x 18 • • • • •
LENGTH 5.4M
Dressed All Round (DAR)
QLD NSW/ACT VIC/TAS SA WAFJ03111TP 31 x 11 • • • • •FJ04211TP 42 x 11 • • • • •FJ06611TP 66 x 11 • • • •FJ09211TP 92 x 11 • •FJ10511TP 105 x 11 •FJ01818TP 18 x 18 • • • •FJ03118TP 31 x 18 • • • •FJ04218TP 42 x 18 •FJ06618TP 66 x 18 •FJ18718TP 187 x 18 • • • • •FJ23018TP/5.4 230 x 18 • • • • •FJ28018TP/5.4 280 x 18 • • • •FJ03131TP 31 x 31 • • • • •
For the full range and profiles go to woodhouse.com.au. Check profile and length availability with your state sales office. Certain product lengths may not be ranged as standard and may be available as special order. Note: Profiles illustrated are not to scale.
FJ13818PR4TPFJ04218PR4TP FJ06618PR4TP FJ09218PR4TP FJ11018PR4TP FJ11618PR4TP
FJ03111TP FJ03131TP FJ10511TP FJ06618TP FJ23018TP
LENGTH 5.4M
10
CW18518C09019 C13819 SWB175226C18519 RW13818 RW18518CWA17618C15819 C16618
Cladding and Lining Boards
LB302TP LB321TP
WBS03030 WBS05730
QLD NSW/ACT VIC/TAS SA WA LENGTH (LM)CHAMFERBOARDC09019/5.4 90 x 19 • 5.4C13819/5.4 138 x 19 • 5.4C15819/5.4 158 x 19 • 5.4C18519/5.4 185 x 19 • 5.4C16618/5.4 166 x 18 • 5.4CHAMFERBOARD - WACWA17618 176 x 18 • 5.4CLASSIC WEATHERBOARDCW18518/5.4 185 x 18 • • 5.4RUSTICATED WEATHERBOARDRW13818/5.4 138 x 18 • • • • 5.4RW18518/5.4 185 x 18 • • • • • 5.4RW18518/7.2 185 x 18 • 7.2SAWN FACE WEATHERBOARDSWB175226/5.4 176 x 22 • • • • • 5.4SHIP LAPVJSL13818/5.4 138 x 18 • • • • • 5.4WEATHERBOARD STOP PROFILE LISTWBS03030 30 x 30 • 2.7, 3.0, 3.6WBS05730 57 x 30 • 2.7, 3.0, 3.6, 5.4LINING BOARDLB302TP/5.4 138 x 11 • • • • 5.4LB321TP/5.4 138 x 11 • • • • • 5.4
VJSL13818
LB30
2TP
CW18
518
C090
19
C138
19
C158
19
LB32
1TP
RW13
818
RW18
518
WBS05730
WBS03030
C166
18
CWA1
7618
C185
19
VJSL
1381
8
SWB1
7522
6
Check profile and length availability with your state sales office. Certain product lengths may not be ranged as standard and may be available as special order.Note: Profiles illustrated are not to scale.
11
FJ01818QTP FJ03131EATP FJ03131SCTPFJ01818TQTP
Architraves and Mouldings (Exterior and Interior)
QLD NSW/ACT VIC/TAS SA WAQUADFJ01818QTP 18 x 18 • • • • •FJ02323QTP 23 x 23 •TRI-QUADFJ01818TQTP 18 x 18 • •EXTERNAL ANGLEFJ03131EATP 31 x 31 • • • •FJ04242EATP 42 x 42 •OVOLO MOULDFJ03131OVLTP 31 x 31 •COVER BATTENFJ0328CBTP 32 x 8 •CORNER MOULDFJ04242CMTP 42 x 42 •ARCHITRAVES AND SKIRTINGSFJ06618BETP 66 x 18 Bevelled • FJ09218BETP 92 x 18 Bevelled •FJ04211BNTP 42 x 11 Bullnose • FJ06611BNTP 66 x 11 Bullnose •FJ06618BNTP 66 x 18 Bullnose • FJ09218BNTP 92 x 18 Bullnose •FJ06618HS2TP 66 x 18 Half Splayed 2 • • • • FJ09218HS2TP 92 x 18 Half Splayed 2 • • • •FJ04211STP 42 x 11 Splayed • FJ06611STP 66 x 11 Splayed •FJ06618PRTP 66 x 18 Pencil Round • FJ09218PRTP 92 x 18 Pencil Round •SCOTIAFJ03131SCTP 31 x 31 • • • • •
FJ01
818Q
TP
FJ03
131S
CTP
FJ06618HS2TP
FJ01
818T
QTP
FJ03
131E
ATP
FJ06
618H
S2TP
LENGTH 5.4M
FJ06
618B
ETP
FJ06
618B
NTP
FJ03
131O
VLTP
FJ03
28CB
TP
FJ04
242C
MTP
For the full range and profiles go to woodhouse.com.au. Check profile and length availability with your state sales office. Certain product lengths may not be ranged as standard and may be available as special order. Note: Profiles illustrated are not to scale.
PROFILE LIST DISCLAIMER: Certain product lines may not be ranged as standard and may be available as a special order. Please check all product availability with the relevant salesperson. Specifications are subject to change without notice, in accordance with national regulations and legislations. Whilst all care has been taken to ensure the accuracy of the information and advice in this document, it is intended as a guide only. Refer to the Building Code of Australia guidelines or your local building authority/council to ensure correct construction practices are followed. The Woodhouse Timber Company accepts no responsibility for any errors, omissions, work done or any consequence of reliance on this document to the extent permitted by law. All material and content remains the property of, and is copyright to, the Woodhouse Timber Company.
woodhouse.com.auToll Free: 1300 880 662 | [email protected]
BRISBANE 32 Bernoulli StreetDarraQLD 4076T: 07 3217 0622F: 07 3217 0551
SYDNEYWarehouse B31-39 Sturt StreetSmithfieldNSW 2164T: 02 9892 1055F: 02 9892 1066
MELBOURNE70 Logis BoulevardDandenong SouthVIC 3175T: 03 9791 8064F: 03 9791 8069
ADELAIDE5 Lafitte RoadWingfield SA 5013T: 08 8260 1644F: 08 8262 3392
PERTH33 Fargo WayWelshpool WA 6106T: 08 6254 2315F: 08 6253 8622
OCTO
BER 2
018_
V1