Prices as of July 2016 - Wyoming Analytical Laboratories,...
Transcript of Prices as of July 2016 - Wyoming Analytical Laboratories,...
1 Wyoming Analytical Laboratories, Inc. July 2016 Prices subject to change without notice.
Prices as of July 2016
Wyoming Analytical Laboratories, Inc.
July 29
2016Analytical Services Fee Schedule
2 Wyoming Analytical Laboratories, Inc. July 2016 Prices subject to change without notice.
Contents General Information ..................................................................................................................................... 3
Combustible & Industrial Materials Analysis ................................................................................................ 4
Sample Preparation .................................................................................................................................. 4
Biomass & Cogeneration ........................................................................................................................... 4
Coal & Coke ............................................................................................................................................... 5
Petroleum & Petroleum Products ............................................................................................................. 6
Ash, Fly Ash, Bottom Ash, Slag, Scale & Other Pozzolans ......................................................................... 7
Construction Materials ............................................................................................................................. 7
Environmental Analysis ................................................................................................................................. 8
Sample Preparation .................................................................................................................................. 8
Analysis of Metals ..................................................................................................................................... 8
Water, Produced Water & Field Water..................................................................................................... 9
Potability & Well Water Testing ............................................................................................................. 10
Gaseous, Air & Exhaust Samples ............................................................................................................. 10
Sludge, Sump & Waste Oil Material ........................................................................................................ 11
Soil ........................................................................................................................................................... 11
Organics .................................................................................................................................................. 12
Radiochemistry ....................................................................................................................................... 12
Additional Information................................................................................................................................ 14
Wyoming Department of Environmental Quality Guidelines ................................................................. 14
Common Pit Closure Analysis in Wyoming & Colorado .......................................................................... 14
Common Soil Disposal Analysis in Wyoming .......................................................................................... 15
Definitions, Terms & Abbreviations ........................................................................................................ 16
Containers, Preservatives, Holding Times............................................................................................... 18
Laramie Location Rock Springs Location Golden Location 1660 Harrison Street 625 Center Street 14335 West 44
th Avenue
Laramie, WY 82070 Rock Springs, WY 82901 Golden, CO 80403 307-742-7995 307-362-3176 303-278-2446 Fax: 307-721-8956 Fax: 307-362-3581 Fax: 303-278-2439 [email protected] [email protected] [email protected]
3 Wyoming Analytical Laboratories, Inc. July 2016 Prices subject to change without notice.
General Information The following terms and conditions will apply to all goods and services provided by Wyoming Analytical Laboratories, Inc. (WAL): 1. Payment in full is due upon receipt of invoice, or as specified in prearranged, written terms. For
service requests totaling less than $50.00, payment is expected at time of sample receipt. If such payment is not received, a billing fee will be added to the service request, bringing the final invoice amount to $50.00.
2. Prices are subject to change without notice. Additional unforeseen charges for preparation, sample handling, shipping, etc., may apply. Prices quoted to the customer will remain in effect for 90 days unless otherwise stated in writing by WAL at the time of quotation.
3. Samples may be submitted to any of our locations Monday through Friday, 8am to 5pm, excluding
common holidays. After-hours or weekend delivery may be arranged at a premium. Standard turn-around-time (TAT) is 10 working days; faster TATs can usually be honored at a premium. If a short TAT is required, contact the laboratory to verify that the current workload will allow for rush samples. If the lab can honor your request, premiums will be applied as follows:
Same day turnaround . . . . . . . . . . . Add 300%
1 working day . . . . . . . . . . . . . . . . . Add 200%
2 working days . . . . . . . . . . . . . . . . Add 100%
3 working days . . . . . . . . . . . . . . . . Add 75%
4 working days . . . . . . . . . . . . . . . . Add 50%
5 working days . . . . . . . . . . . . . . . . Add 30%
6 working days . . . . . . . . . . . . . . . . Add 15% 4. If a balance is outstanding for more than 60 days, or when the unpaid balance exceeds the
established line of credit, WAL reserves the right to terminate the customer’s credit and refuse to perform additional services on credit.
5. The analyses, opinions or interpretation of results by WAL, in response to customer request, reflect
WAL’s best judgment. WAL adheres to accepted industry standards and practices when performing laboratory analyses and endeavors to report complete and accurate results. WAL does not guarantee results, and its sole liability is limited to the value of the analysis.
6. WAL will hold in confidence all information it receives from the customer and the results of all
analyses and other services provided to the customer. Results may be supplied to a third party only with written customer authorization.
EXCEPT AS NOTED ABOVE, WAL MAKES NO REPRESENTATION OR WARRANTY, EXPRESS, IMPLIED OR STATUTORY, REGARDING ITS SERVICES OR REPORTS.
4 Wyoming Analytical Laboratories, Inc. July 2016 Prices subject to change without notice.
Combustible & Industrial Materials Analysis
Sample Preparation
Price
Biomass, Cogeneration, Construction Material & Ash
Sample Preparation (minimum charge) $25.00
Ashing of prepared material (dried and pulverized) $19.00
Multiple-Stage Laboratory Preparation – (crushing, pulverizing, blending, splitting, etc.) $61.00 per hour
Acid Digestion for Total Metals Analysis of Biomass or Cogeneration Materials $55.00
Coal & Coke
Sample Preparation (minimum charge) $13.00
Two-Stage Sample Preparation (minimum charge) $19.00
Ashing of prepared material (previously dried and pulverized) $16.00
Multiple-Stage Laboratory Preparation – (crushing, pulverizing, blending, splitting, etc.) $55.00 per hour
Acid Digestion for Total Metals Analysis of Coal or Ash $19.00
Other
Sample Return shipping fee Cost +15%
Heavy, Dangerous or Difficult Sample Preparation fee $55.00 per hour
Use of Laboratory Space $91.00 per hour
Sample Collection (include driving time) $55.00 per hour
Mileage $0.65 per mile
Bias Tests, Lab Audits, Consultations, etc. Inquire
Sieve Analysis (Method D4749)
Dry Samples Weighing < 50 pounds, up to 6 screens $37.00
Each additional screen $9.00
Dry Samples Weighing > 50 pounds, up to 6 screens $116.00
Each additional screen $19.00
Wet Samples Weighing < 50 pounds, up to 6 screens $61.00
Each additional screen $10.00
Wet Samples Weighing > 50 pounds, up to 6 screens $146.00
Each additional screen $25.00
Samples received for analysis will be discarded after 30 days, unless other instructions are received. Dangerous or toxic materials will be returned to the customer at the cost of shipping plus 15%. See also Sample Preparation for metals analysis.
Biomass & Cogeneration Biomass & Cogeneration Fuel Analysis is done by modified ASTM and/or EPA Methods. Sample preparation fees may apply. Other metals analysis also available.
Modified Method Price
Bulk Density D1555 / C559 $49.00
Chlorine in Biomass D4326 (XRF) $44.00
Fluorine in Biomass D3761 $52.00
Heating Value of Biomass (calorific value, Btu/lb) D5865 $61.00
Mercury in Biomass by Direct Combustion (includes moisture content) D6722 $61.00
Moisture & Ash in Biomass D7582 $59.00
Moisture or Ash in Biomass, Individually D7582 $31.00
Sulfur in Biomass D4239 $37.00
Commonly Requested Analysis of Biomass
Proximate Analysis of Biomass – Moisture, Ash, Volatile Matter, & Fixed Carbon (by difference)
D7582 $66.00
Ultimate Analysis of Biomass – Moisture, Ash, Carbon, Hydrogen, Nitrogen, Sulfur, & Oxygen (by difference)
D7582, D5373, D4239 $171.00
Proximate, Ultimate, Btu Analysis of Biomass D7582, D5373, D4239, D5865
$212.00
Full Prox of Biomass – Proximate, Btu/lb & Sulfur D7582, D5865, D4239 $119.00
Short Prox of Biomass – Moisture, Ash, Btu/lb & Sulfur D7582, D5865, D4239 $80.00
5 Wyoming Analytical Laboratories, Inc. July 2016 Prices subject to change without notice.
Coal & Coke Sample preparation fees may apply.
Method Price
Commonly Requested Analysis of Coal
Proximate Analysis of Coal – Moisture, Ash, Volatile Matter & Fixed Carbon (by difference)
D7582 $55.00
Ultimate Analysis of Coal – Moisture, Ash, Carbon, Hydrogen, Nitrogen, Sulfur, & Oxygen (by difference)
D7582, D5373, D4239 $138.00
Proximate, Ultimate, Btu Analysis of Coal D7582, D5373, D4239, D5865
$201.00
Proximate, Ultimate Analysis of Coal (does not include Btu) D7582, D5373, D4239 $165.00
Full Prox of Coal – Proximate, Btu/lb & Sulfur D7582, D5865, D4239 $105.00
Short Prox of Coal – Moisture, Ash, Btu/lb & Sulfur D7582, D5865, D4239 $72.00
General Analysis
Bromine in Coal D4326 (XRF) $44.00
Chlorine in Coal D4326 (XRF) $44.00
Fluorine in Coal D3761 $50.00
Carbon – Total, Combustible & Carbonate D6316 $92.00
CHN in Coal or Biomass – Carbon, Hydrogen & Nitrogen Content D5373 $77.00
Carbon, Hydrogen or Nitrogen in Coal or Biomass, individually D5373 $39.00
EqM – Equilibrium Moisture D1412 $94.00
FSI – Free Swelling Index D720 $39.00
Forms of Sulfur (pyritic, sulfate, organic, total) D2492 $94.00
Heating Value of Coal (calorific value, Btu/lb – includes % sulfur) D5865, D4239 $50.00
Extra charge when ash content exceeds 25% D5865, D4239 $13.00
HGI – Hardgrove Grindability Index (with moisture value) D409 $94.00
Mineral Carbon (carbonate C; inorganic C) D1756 $55.00
Moisture, Total in Coal (includes air-dry loss, prep and residual moisture) D3302 $55.00
Moisture & Ash in Coal D7582 $44.00
Moisture or Ash in Coal, individually (by TGA only) D7582 $28.00
Moisture Gain/Loss In-house method $132.00
Oxidation by Alkali Extraction D5263 $72.00
Specific Gravity (density) D167 $30.00
Sulfur in Coal D4239 $33.00
Vitrinite Reflectance D2798 $182.00
Washability (500 grams or less; various gravities available) D4371 $121.00
Washability (large scale samples) D4371 Inquire
Water or Acid Soluble Alkalies In-house method $91.00
Metals Analysis of Coal
Trace Elements in Coal – As, Be, Cd, Co, Cr, Cu, Mn, Mo, Ni, Sb, V, Zn 6010 or 6020 $19.00 each
Mercury in Coal by Direct Combustion (includes moisture content) D6722 $61.00
Other Elements Available 6020 Inquire
TRI Trace Metals – Toxic Release Inventory - Al, Sb, As, Ba, Cd, Cr, Co, Cu, Pb, Mn, Mo, Ni, Se, Ag, Tl, Th, V, Zn, Be, Cl, F, plus Hg by Direct Combustion, prep and digestion included
6020 $363.00
Historical Method Analyses
Manual Ash (750 °C) D3174 $37.00
Manual Moisture D3173 $31.00
Manual Proximate – Moisture, Ash, Volatile Matter, & Fixed Carbon (by difference)
D3172 $112.00
Sulfur, Total, by Eschka D3177A $303.00
Manual Volatile Matter D3175 $44.00
6 Wyoming Analytical Laboratories, Inc. July 2016 Prices subject to change without notice.
Petroleum & Petroleum Products Sample preparation fees may apply. See Environmental Analysis for petroleum contaminants in water or soil, or hydrocarbon characterization.
Method Price
Basic Fuel Oil Analysis – Moisture, Ash, Carbon, Hydrogen, Nitrogen & Oxygen (by difference), Specific Gravity, Heating Value
D482, D5291, D1298, D4809
$201.00
Acid Number – potentiometric or color titration D974 $66.00
Additives, Contaminants, & Wear Metals in Petroleum Various Methods Inquire
Ash Content of Oil D482 $28.00
Ash, Sulfated D874 $72.00
Asphaltenes (n-heptane insoluble) D6560 mod $182.00
Carbon Residue (Conradson) D189 $83.00
CHN in Oil – Carbon, Hydrogen and Nitrogen Content D5291 $80.00
Carbon, Hydrogen or Nitrogen in Oil, individually D5291 $39.00
Cetane Index (calculated) includes distillation and API gravity D976 $125.00
Chloride, Organic D4929 $152.00
Cloud Point D5773 $22.00
Color D1500 / D1544 $19.00
Distillation (for each 1% moisture over 10%, add $10) D86 $300.00
Flash Point, Pensky-Martens, closed cup D93 $66.00
Flash Point, Tag, closed cup D56 $66.00
Flash and Fire Points, Tag, open cup D1310 $66.00
Flash and Fire Points, Cleveland, open cup D92 $66.00
Freeze Point D7153 $44.00
Heating Value (Btu/lb) of Oil (includes API Gravity) D4809 $66.00
Pour Point D5949 / D5950 $55.00
RVP – Reid Vapor Pressure D323 $72.00
Sediment and Water (Centrifuge) D4007 $55.00
Simulated Distillation GC method (42 °C – 320 °C) D3710 $242.00
Simulated Distillation GC method (50 °C – 540 °C) D2887 $256.00
Simulated Distillation GC method (174 °C – 700 °C) D6352 $330.00
Softening Point (ring & ball) D36 $52.00
Specific Gravity of Oil – API Gravity (hydrometer) D287 / D1298 $25.00
Sulfur in Gasoline, by XRF D2622 $45.00
Sulfur in Diesel, by XRF D2622 $45.00
Sulfur in Diesel, ultra-low detection limits by XRF D2622 $61.00
Sulfur, Total, in Oil D2622 $45.00
Viscosity, Kinematic, 45 °F to 180 °F; per temp D445 $72.00
Viscosity, Kinematic, 185 °F to 210 °F; per temp D445 $110.00
Viscosity, Saybolt D2161 $110.00
Water in Oil (distillation) D95 $66.00
Petroleum Coke Analysis
Silicon, Calcium, Iron, Nickel, Vanadium & Sulfur, includes preparation fee 6020, D2622 $158.00
Single element from list 6020 / D2622 $44.00
Sulfur in Petcoke D2622 $44.00
Other elements available 6020 / D2622 Inquire
Halogens in Oil
Total Halogens in Oil – Fluorine, Chlorine, Bromine & Iodine D3761 / D5987, XRF $100.00
Fluorine, in Oil D3761 / D5987 $50.00
Chlorine, Bromine and Iodine in Oil XRF $50.00
Chlorine, Bromine or Iodine in Oil, individually XRF $44.00
7 Wyoming Analytical Laboratories, Inc. July 2016 Prices subject to change without notice.
Ash, Fly Ash, Bottom Ash, Slag, Scale & Other Pozzolans Sample preparation fees may apply.
Method Price
Elemental Analysis of Ash – SiO2, TiO2, Al2O3, Fe2O3, CaO, MgO, K2O, Na2O, SO3, P2O5, MnO2, SrO, BaO; calculated T250, base/acid ratio, silica value, LOI* at 750 °C (if needed)
D4326 (XRF), C311 $240.00
Single elements from list D4326 (XRF) $44.00
Ash Viscosity Index – T250 (requires elemental analysis) calculated $245.00
Elemental Analysis by ICP-MS – Si, Ti, Al, Fe, Ca, Mg, K, Na, S, P, Mn, Sr, Ba, calculated as oxides
D6349 mod $270.00
LOI* (750 °C or 950 °C, please specify) D7348 $61.00
Sodium in Ash (includes fusion and digestion) D3682 $33.00
Ash Fusion Analysis
Reducing Atmosphere (4-point Ash Fusion) D1857 $61.00
Oxidizing Atmosphere (4-point Ash Fusion) D1857 $55.00
Reducing and Oxidizing Atmospheres on a single sample (8-point) D1857 $105.00
Construction Materials Sample preparation fees may apply. Cement and fly ash samples are analyzed at the Denver Division in Golden, Colorado. WAL will accept samples at any of our locations and direct them to the appropriate facility as needed, however, it would be expedient to submit these types of samples directly to the Golden location (see page 2).
Method Price
Cement, Concrete and Aggregate
Elemental Analysis of Cement – reported as oxides: SiO2, Al2O3, Fe2O3, TiO2, CaO, MgO, Na2O, K2O, P2O5, Mn2O3, SrO, BaO, SO3, LOI* (950 °C), insoluble residue
C114 (XRF) $314.00
Single elements from list C114 (XRF) $44.00
28-Day Available Alkali (determination of Na and K in solution) C311 $66.00
Chloride, Acid Soluble, in Mortar or Cement C1152 $47.00
Chloride, Water Soluble, in Mortar or Cement C1218 $47.00
Chloride in Aggregate (requires Soxhlet extraction) C1524 $121.00
Soxhlet Extraction for Chloride in Aggregate analysis 3540C $121.00
Chloroform Soluble Organic Substances C114 $105.00
Cement Content of Concrete C1084 $665.00
Evaporative Moisture in Aggregates C566 $33.00
Free Calcium Oxide (CaO) C114 $94.00
Float/Sink - Lightweight Particles in Concrete-Aggregate C123 $154.00
Insoluble Residue in Aggregate D3042 $110.00
Insoluble Residue in Cement C114 $41.00
Potential Alkali-Silica Reactivity of Aggregates C289 $132.00
preparation price for coarse material C289 $66.00
preparation price for fine material C289 $37.00
Staining Materials in Lightweight Concrete-Aggregate C641 $102.00
Lime, Limestone or Gypsum
Elemental Analysis of Lime, Limestone or Gypsum – reported as oxides SiO2, Al2O3, Fe2O3, TiO2, CaO, MgO, Na2O, K2O, P2O5, Mn2O3, SrO, BaO, SO3, LOI* (950 °C), Moisture (120 °C)
Limestone – C25 (XRF) Gypsum – C471 (XRF)
$240.00
Single elements from list C25 (XRF) or C471 (XRF) $44.00
Acid Insolubles C25 or C471 $55.00
Available Lime Index C25 or C471 $92.00
Semi-Quantitative Identification of Components XRF Inquire
*LOI – Loss On Ignition
8 Wyoming Analytical Laboratories, Inc. July 2016 Prices subject to change without notice.
Environmental Analysis
Sample Preparation
Method Price
General
Aqua Regia digestion In-house method $25.00
Wyoming Leachate Procedure, or similar extraction WOGCC April 27, 1999 $110.00
Neutral Leaching Procedure D3987 $146.00
Shake Extraction D3987 $72.00
SPLP Extraction – Synthetic Precipitation Leaching Procedure 1312 $127.00
TCLP Extraction – Toxicity Characteristic Leaching Procedure 1311 $127.00
Filtration when less than 0.5% solid 1311 $52.00
ZHE Extraction – Zero Headspace Extraction 1311 $193.00
Hot Water Extraction In-house method $37.00
Soil
Sample Preparation (compositing, splitting, blending, etc.) $20.00
DTPA extraction (AB-DTPA) In-house method $18.00
Saturated Paste Extraction USDA 60-2,3 $25.00
Sludge, Sump & Waste Oil Material
Bomb Digestion for As, Se or Pb Various EPA Methods $55.00
Acid Digestion for Total Metals Analysis of Sludge or Miscellaneous Solids Various EPA Methods $55.00
Splitting of multi–phase samples (centrifuging, decanting, etc.) Various EPA Methods $55.00 per phase
Water
Filtration for Dissolved Metals, TDS, Sulfates or other analytes Various EPA Methods $10.00
Acid Digestion for Total Metals Analysis of Water Various EPA Methods $18.00
Total Recoverable Metals Digestion Various EPA Methods $19.00
Other
Heavy, Dangerous or Difficult Sample Handling fee $55.00 per hour
Toxic Sample Handling fee $66.00 per hour
Instrument/Equipment Cleanup after high-concentration sample analysis 50% of analysis
Samples received for analysis will be discarded after 30 days, unless other instructions are received. Toxic materials will be returned to the customer at the cost of shipping plus 15%. For other fees and services, see the Combustibles section.
Group Analysis of Metals Sample preparation, filtration, extraction or digestion fees may apply.
Method Price
CAM17 metals – Ag, As, Ba, Be, Cd, Cr, Co, Cu, Mo, Ni, Pb, Sb, Se, Tl, V, Zn, plus Hg by Direct Combustion
200.8 / 6020 $267.00
Chromium, Hexavalent* (Cr+6
; CrIV
) (set up and analysis of one sample) 3060A mod $75.00
Each additional sample of the same type of material 3060A mod $30.00
One additional sample of a different material 3060A mod $75.00
Each additional sample of that type of material 3060A mod $30.00
Cr3 (requires Total Chromium and Hexavalent Chromium, priced separately) Calculation $13.00
Precious Metals, Group 1** – Ag, Au, Pd, Pt 200.8 / 6020 $61.00
Precious Metals, Group 2** – Ag, Au, Ir, Pd, Pt, Rh 200.8 / 6020 $80.00
Priority Pollutant List – Ag, As, Be, Cd, Cr, Cu, Hg, Ni, Pb, Sb, Se, Tl, Zn 200.8 / 6020 $182.00
RCRA metals – Cr, As, Se, Ag, Cd, Ba, Hg, Pb 200.8 / 6020 $201.00
Safe Drinking Water Act – As, Ba, Be, Cd, Cr, Hg, Ni, Sb, Se, Tl 200.8 / 6020 $171.00
Target Analyte – Ag, Al, As, Ba, Be, Ca, Cd, Co, Cr, Cu, Fe, Hg, K, Mg, Mn, Na, Ni, Pb, Sb, Se, Tl, Zn
200.8 / 6020 $267.00
Semi-Quantitative Scan by ICP-MS 200.8 / 6020 $193.00
Individual Metals in Water or Solution
Al, Sb, As, Ba, Be, Bi, B, Cd, Ca, Cr, Co, Cu, Au, Fe, Pb, Li, Mg, Mn, Mo, Ni, Pd, Pt, K, Se, Na, Sr, Sn, Ti, W, U, Va, Zn
200.7 / 6010 200.8 / 6020
$17.00 each
Silicon, Silver, Thallium, Gallium, Rubidium, Tellurium 200.8 / 6020 $18.00 each
Mercury 200.8 / 6020 $55.00
Other elements not listed above 200.8 / 6020 Inquire
9 Wyoming Analytical Laboratories, Inc. July 2013 Prices subject to change without notice.
Water, Produced Water & Field Water Sample preparation, filtration, extraction or digestion fees may apply. Water samples should be kept cool and delivered to the lab within 48 hours of collection. See note below for BOD analysis.
Method Price
BOD*** – Biochemical Oxygen Demand SM5210B / 405.1 $85.00
COD – Chemical Oxygen Demand 410.3 $61.00
DO – Dissolved Oxygen SM4500-OC $36.00
Glycol Detection Presence / Absence In-house method $50.00
Langelier Index (Corrosivity) SM2330B $61.00
Phenolics, Total in water 420.1 $80.00
Resistivity 120.1 $16.00
Salinity - sodium, chloride In-house method $37.00
Specific Gravity by hydrometer In-house method $13.00
Sugars In-house method $61.00
Anion Analysis
Anion Scan – Fluoride, Chloride, Nitrite, Bromide, Nitrate, Phosphate and Sulfate by Ion Chromatography
300.0 $66.00
Any single anion by IC 300.0 $44.00
Nitrate + Nitrite as N by IC 300.0 $44.00
Phosphorous, Ortho Phosphate 300.0 $44.00
Other Analytes by IC 300.0 Inquire
Alkalinity**** –Bicarbonate, Carbonate and Hydroxide as CaCO3 SM2320-B / 150.1 $31.00
Bicarbonate, Carbonate or Hydroxide, Individually SM2320-B / 150.1 $20.00
Chloride, by Titration SM4500B / D512 $25.00
Chlorine, Free (as measured in the lab) SM4500 $20.00
Chlorine, Residual (as measured in the lab) SM4500 $20.00
Chlorine, Total (as measured in the lab) SM4500 $20.00
Nitrogen
Ammonia, as N SM4500-NH3 $44.00
Kjeldahl Nitrogen, as N SM4500-Norg / 3590 $72.00
Organic Nitrogen (Kjeldahl – Ammonia) calculation $110.00
Total Nitrogen (Kjeldahl + Nitrate + Nitrite) calculation $110.00
Phosphorous, Total SM4500-P $37.00
Sulfate, Gravimetric 375.3 $25.00
Sulfide / Hydrogen Sulfide Hach HS-C $55.00
Solids in Water Analysis
Sediment in Water D3977 $55.00
Silt Density Index D4189 mod $121.00
TSS – Total Suspended Solids (105 °C) SM2540-D / 160.2 $18.00
TDS – Total Dissolved Solids, by probe (typically for well or drinking water) In-house method $18.00
TDS, Gravimetric (180 °C) (typically for field or produced water) SM2540-C / 160.1 $31.00
TS – Total Solids (105 °C) SM2540B $18.00
TVS – Total Volatile Solids (550 °C) SM2540E $19.00
Turbidity SM2130 / 180.1 $37.00
Oil Field Water Analysis
Field / Produced Water Analysis – Ca, Mg, K, Fe, Na, Ba, TDS, Conductivity, pH, Alkalinity, Chloride and Sulfate
Various Methods $201.00
Administration Fee – required if results are reported to a regulatory agency $37.00
* Sample for Hexavalent Chromium analysis must have a pH greater than 7. Results may be affected if the sample contains Iron or Sulfates, or if the extract derived from the sample is dark in color. ** Some metals may require Aqua Regia digestion. *** Samples for BOD analysis are ONLY received at the Rock Springs Lab on Monday and Tuesday. Samples must be less than 48 hours old when analysis begins on Wednesday morning. **** Samples for Alkalinity must have a pH greater than 4.5.
10 Wyoming Analytical Laboratories, Inc. July 2016 Prices subject to change without notice.
Potability & Well Water Testing Sample kits with documentation and instructions are available for pickup at the lab or mailed free of charge (see contact
information on page 2). Well water samples should be kept cool and delivered to the lab within 24 hours of collection and must be received before 2:00 pm Monday through Thursday in order for these prices to be effective.
Method Price
Well Water Analysis
Group 1 – Human Consumption includes Calcium, Iron, Magnesium, Sodium, Potassium, Hardness, Total Dissolved Solids, Conductivity, pH, Bicarbonate, Carbonate, Fluoride, Chloride, Nitrite, Nitrate, Sulfate
Various Methods $135.00
Group 2 – Agriculture includes Calcium, Magnesium, Sodium, Hardness, SAR calculation, Total Dissolved Solids, pH, Nitrate, Sulfate
Various Methods $110.00
Group 3 – Livestock includes Calcium, Magnesium, Sodium, Hardness, Total Dissolved Solids, pH, Nitrate, Sulfate
Various Methods $90.00
Recommended Baseline Analysis – Group 1, Surfactants, Oil & Grease Various Methods $295.00
Surfactants by MBAS (colorimetric, methylene blue active substances) SM5540C mod $50.00
Oil & Grease (n-Hexane extraction) 1664 $110.00
TOC in Water – Total Organic Carbon (used as a post-Baseline check) 415.1 $55.00
Copper, Potability 200.8 $25.00
Lead, Potability 200.8 $25.00
Lead & Copper, 1st
& 2nd
Draw 200.8 $80.00
Group 1 Cations only – Calcium, Iron, Magnesium, Sodium, Potassium 200.7 $44.00
Group 1 Anions only – Fluoride, Chloride, Nitrite, Nitrate, Sulfate 300.0 $44.00
Group 1 Cation/Anion Balance (includes Group1 Cations/Anions & Alkalinity) 200.7, 300.0, 150.1 $105.00
Conductivity (Specific Conductance) SM2510-B / 120.1 $16.00
Hardness – calculated (includes Calcium & Magnesium) 200.7 $28.00
pH of Water SM4500-H+B / 150.1 $16.00
Bacteriological Analysis Manufacturer
Sample received on Friday (results observed on Saturday) $45.00
Total Coliform & E. coli, Pass/Fail – Laramie only ReadyCult $45.00
Failure – 2nd
run sample fee ReadyCult $37.00
Total Coliform & E. coli, MPN – Rock Springs only Quanti-Tray $47.00
Fecal Coliform, MPN – Rock Springs only Standard Method 9222D $50.00
Heterotrophic Plate Count IDEXX SimPlate $61.00
BART: Biological Activity Reaction Test
APB – Acid Producing Bacteria Droycon Bioconcepts $66.00
SLYM – Slime Forming Bacteria Droycon Bioconcepts $66.00
SRB – Sulfur Reducing Bacteria Droycon Bioconcepts $66.00
IRB – Iron Reducing Bacteria Droycon Bioconcepts $66.00
HAB – Heterotropic Aerobic Bacteria Droycon Bioconcepts $66.00
Gaseous, Air & Exhaust Samples Gaseous samples should be kept cool or frozen and delivered to the lab within 24 hours of collection and must be received before 2:00 pm Monday through Thursday for these prices to be effective.
Method Price
Sample received on Friday (analyzed after hours or on the weekend) $61.00
BTEX in Gaseous – by GC FID / PID 8020 $152.00
TVPH – Total Volatile Petroleum Hydrocarbons 8015 mod $116.00
TVPH and BTEX Gaseous 8015 mod, 8020 $175.00
Natural Gas Analysis GC (FID & TCD) $149.00
Atmospheric Analysis – CO, CO2, N2, O2, CH4 GC (FID & TCD) $121.00
Tedlar sample bags are available if needed. The customer will be charged $20.00 per bag that is not returned to the lab.
11 Wyoming Analytical Laboratories, Inc. July 2016 Prices subject to change without notice.
Sludge, Sump & Waste Oil Material Sample preparation, filtration, extraction or digestion fees may apply. Sludge, sump and waste oil samples should be kept cool and delivered to the lab within 48 hours of collection.
Method Price
Corrosivity, pH of water phase 9040 $18.00
Corrosivity, pH of solid phase 9045 $20.00
Cyanide – weak and dissociable (spot test) SM4500-CN K $72.00
Cyanide – total and amenable (extraction) 9012A / 9013 $72.00
Ignitability of Solids 1030 $66.00
Lead in Paint (includes digestion) 7421 $72.00
Paint Filter Test 9095B $18.00
Reactivity as Cyanide 0335.3 $50.00
Reactivity as Sulfide 0376.2 $50.00
Reactivity as Cyanide and Sulfide 0335.3, 0376.2 $85.00
TOC in Solid – Total Organic Carbon SM5310B $72.00
TOX – Total Organic Halogens 9020B $152.00
Total Carbon D5373 mod $55.00
Soil Sample preparation, filtration, extraction or digestion fees may apply. Soil samples should be kept cool and delivered to the lab within 48 hours of collection.
Method Price
Conductivity (requires saturated paste) USDA 60-4 $11.00
ESP – Exchangeable Sodium % (includes SAR) USDA 60-18,19,20 $80.00
Exchangeable Cations (includes soluble cations and anions) USDA 60-18,19,20 $105.00
Nitrate Nitrogen in Soil ASA 9.2 33-8.2 $37.00
Organic Matter ASA 9.2 29-3.5.2 $28.00
Organic Carbon (Walkley-Black method) USDA 90-3.2.2 $61.00
pH of Soil (requires saturated paste) USDA 60-21a $18.00
SAR – Sodium Absorption Ratio (includes soluble cations) USDA 60-18,19,20 $44.00
Saturation Percentage (requires saturated paste) USDA 60-27 $11.00
Soluble Cations – Ca, Mg, Na, K (requires saturated paste) 6010 $33.00
Soluble Anions – major anions (requires saturated paste) calculation $72.00
Sulfate, Water Soluble, in Soil (requires hot water extraction) C1580 $47.00
Particle Size Analysis
Clay, silt, sand, very fine sand D421 / D422 $47.00
Clay, silt, sand D421 / D422 $39.00
Texture (includes particle size analysis) $50.00
Acid-Base Potential - ABP=NP-AP (includes NP, ST and SSO4) calculation $66.00
Acid Potential – AP=ST-SS04 (includes ST and SSO4) calculation (ASA 9.2 28-2.2.3) $53.00
Sulfur, Total in Soil (ST) D4239 $33.00
Sulfate Sulfur in Soil (SSO4) D2492 $20.00
Carbonates USDA 60-23b $20.00
Neutralization Potential (as % CaCO3) USDA 60-23c $15.00
12 Wyoming Analytical Laboratories, Inc. July 2016 Prices subject to change without notice.
Organics Sample preparation, filtration, extraction or digestion fees may apply. Samples requiring Organics Analysis should be should be kept cool and delivered to the lab within 48 hours of collection.
Method Water Soil/Oil/Sludge
Benzene 8020 $127.00 $127.00
BTEX 8020 $127.00 $127.00
BTEX + MTBE + Naphthalene by GC-MS * 8260, 624 Inquire Inquire
Volatile Organics by GC-MS * 8260, 624 Inquire Inquire
PAH – Polyaromatic Hydrocarbons by GC-MS * 8270, 625 Inquire Inquire
Semi-Volatile Organics by GC-MS * 8270, 625 Inquire Inquire
BNA – Base, Neutral, Acid by GC-MS * 8270, 625 Inquire Inquire
Methanol, Ethanol and Propanol 8015 mod $182.00 $212.00
Methanol, Ethanol or Propanol, individually 8015 mod $132.00 $152.00
Glycols 8015 mod / D2982 $132.00 $132.00
Amines, Amides 8015 mod $105.00 $116.00
Hydrocarbon Fingerprint Analysis 8015 mod $182.00 $182.00
Herbicides/Pesticides Various Inquire Inquire
PCBs Various Inquire Inquire
Other Components 8015 mod / 8260 Inquire Inquire
TPH – Total Petroleum Hydrocarbons Analysis
DRO 8015 mod $176.00 $176.00
GRO 8015 mod $97.00 $127.00
GRO + BTEX 8015 mod $146.00 $146.00
GRO + BTEX + MTBE 8020 / 8015 mod $146.00 $182.00
GRO + DRO 8015 mod $237.00 $237.00
GRO + BTEX + DRO 8015 mod $248.00 $248.00
GRO by GC-MS * 8260, 624 Inquire Inquire
Oil & Grease (n-Hexane extractable) 1664 $110.00 N/A
TPH 418.1** (Freon extraction) 418.1 $212.00 $212.00
*GC-MS analysis requires a shipping fee of Cost + 15% for shipment of a cooler overnight to a subcontract laboratory.
**EPA no longer allows this method unless grandfathered in under an existing permit or the work falls under E&P exemption for Wyoming Oil & Gas Conservation Commission.
Methods 8260 and 8270 have detection limits as low as ppb (μg/kg or μg/L), depending on extraction and dilution of samples. Methods 8015 and 8020 have detection limits as low as ppm (mg/kg or mg/L), depending on extraction and dilution of samples. GRO – Gasoline Range Organics (C6 to C10) DRO – Diesel Range Organics (C10 to C32) BTEX – benzene, toluene, ethyl benzene, xylenes MTBE – methyl tertiary-butyl ether
Radiochemistry Method Water Soil/Oil/Sludge
Gross Alpha, Beta Various Inquire Inquire
Radium 226, 228 Various Inquire Inquire
14 Wyoming Analytical Laboratories, Inc. July 2016 Prices subject to change without notice.
Additional Information
Wyoming Department of Environmental Quality Guidelines
Guideline Analyses Estimated Price per
Sample*
Wyoming DEQ Well Monitoring
Guideline #8 (2005)
(pH & conductivity should be measured in the field at time of collection) TDS, calculated charge balance, bicarbonate, carbonate, Fluoride, chloride, nitrite, nitrate, sulfate, ammonia As-received metals (B) Total metals (Fe, Mn) Dissolved metals
(Ca, Fe, Mg, Na, K, Ba, Al, Cr, Ni, Cu, Zn, As, Se, Mo, Cd, Hg, Pb)
$363.00 for 1-3 Samples 10% discount for
4+ samples
Wyoming DEQ Baseline Well Monitoring
TDS, conductivity, pH, bicarbonate, carbonate Chloride, fluoride, nitrate, sulfate, ammonia, cyanide Chemical oxygen demand Total organic carbon Total metals (Fe, Mn) Dissolved metals, calculated Hardness and SAR
(Ca, Fe, Mg, Na, K, Ba, Cr, Ni, Cu, Zn, As, Se, Ag, Cd, Hg, Pb)
$610.00 for 1-3 Samples 10% discount for
4+ samples
Wyoming DEQ Solid Waste, Chapter 11 (Quarterly)
TDS, conductivity, calculated charge balance pH, bicarbonate, carbonate Chloride, fluoride, nitrate, sulfate, ammonia, cyanide Chemical oxygen demand Total organic carbon Total metals (Ca, Fe, Mg, Na, K, Cr, Cu, Se, Ag, Cd, Hg, Pb)
$500.00 for 1-3 Samples 10% discount for
4+ samples
Wyoming DEQ Solid Waste, Chapter 11
(Semi-Annually)
TDS Iron, hardness (requires Ca and Mg) Chloride, ammonia Total organic carbon
$200.00 for 1-3 Samples 10% discount for
4+ samples
Wyoming DEQ Form 17
TDS, conductivity, calculated charge balance pH, total alkalinity, bicarbonate, carbonate Chloride, sulfate Dissolved metals (Ca, Fe, Mg, Na, K, Li) + $33.00 administration fee if reported directly to a regulatory agency
$220.00 for 1-3 Samples 10% discount for
4+ samples
Additional analysis may be required by your regulatory agency. Please contact the appropriate agency for a list of analyses required for each well.
Common Pit Closure Analysis in Wyoming & Colorado
State & Type Analyses Estimated Price per
Sample*
Pre-Treatment Wyoming O&GCC
TPH 418.1 on soil or sludge TDS on water phase if present
$250.00
Post-Treatment Wyoming O&GCC
TPH 418.1, TDS and Conductivity on Wyoming Leachate extract RCRA metals on TCLP extract
$700.00
Pre-Treatment Colorado O&GCC
series 900
TPH GRO, BTEX 8260+DRO pH, conductivity and SAR on saturated paste extract RCRA metals on TCLP extract
$650.00
Post-Treatment Colorado O&GCC
series 900
TPH GRO, BTEX (8260)+DRO pH, conductivity and SAR on saturated paste extract Soluble boron on hot water extract RCRA metals, Ni, Cu and Zn on total digestion Hexavalent chromium with Cr
+3 by calculation
PAH semi-volatile organic analysis (8270) + Only on water phase if present: BTEX 8260, TDS, chloride, sulfate
$1,100.00
Additional analysis may be required. Please contact the appropriate agency for a list of analysis required. *Additional analysis charges, handling fees and/or shipping fees may apply.
15 Wyoming Analytical Laboratories, Inc. July 2016 Prices subject to change without notice.
Common Soil Disposal Analysis in Wyoming
Contaminant Analysis Estimated Price per
Sample*
Condensate TPH GRO 8015, Volatile Organics by GC-MS
$450.00
Crude Oil TPH GRO, BTEX 8015+DRO RCRA metals on TCLP extract
$600.00
Diesel / Refined Fuel TPH DRO $180.00
Gasoline TPH GRO, BTEX 8015 $150.00
Used Oil TPH GRO 8015+DRO Volatile Organics by GC-MS As, Cd, Cr, Pb on TCLP extract As needed: Herbicides/Pesticides, PCBs
$750.00
Unknown TPH GRO 8015+DRO Volatile Organics by GC-MS Semi-Volatile Organics by GC-MS RCRA metals on TCLP extract As needed: Herbicides/Pesticides, PCBs
$1,300.00
Additional analysis may be required by the disposal site. Please contact the appropriate agency for a list of analysis required. *Additional analysis charges, handling fees and/or shipping fees may apply.
16 Wyoming Analytical Laboratories, Inc. July 2016 Prices subject to change without notice.
Definitions, Terms & Abbreviations
Common Terms Anions – fluoride (F), chloride (Cl), nitrite (NO2), nitrate (NO3), bromide (Br), phosphate (PO4), sulfate (SO4),
ammonia (NH3 or NH4), carbonate (CO3), bicarbonate (HCO3) and hydroxide (OH) are common anions.
Total cations and total anions in a sample are usually nearly equal, thus balancing each other.
ASR – Analytical Service Request
Biomass – typically fertilizer, manure, mulch, straw, animal litter, ground litter, wood, paper or other biologically derived fuels
Btu – British thermal units
Cations – calcium, iron, magnesium, sodium, and potassium are common cations.
Total cations and total anions in a sample are usually nearly equal, thus balancing each other.
CoC – Chain of Custody
Cogeneration – refers to a diverse range of solid fuels including garbage, TDF (tire-derived fuel), ASR (auto salvage residue),
RDF (refuse-derived fuel), blends thereof and blends with biomass, petroleum or coal products
Holding Time – the amount of time from sample collection to beginning of analysis in which the sample is still considered
viable, providing the sampler has followed the proscribed procedures regarding temperature, preservative and containment
ppm – parts per million: mg/kg or mg/L
ppb – parts per billion: μg/kg or μg/L (“μ” means “micro”)
Instruments GC – Gas Chromatography: refers to EPA methods 8015, 8020 and others
GC-MS – Gas Chromatograph Mass Spectrometry: refers to EPA methods 8260, 8270 and others
IC – Ion Chromatography: refers to EPA method 300 and others
ICP – Inductively Coupled Plasma: refers to EPA method 6010 and others
ICP-MS – Inductively Coupled Plasma Mass Spectrometry: refers to EPA method 6020 and others
XRF – X-ray Fluorescence Spectrometry: highly accurate instrumental analysis of major and minor components in a solid
sample; capable of determining trace elements heavier than sodium as low as 5 ppm
Extractions, Filtrations and Digestions Aqua Regia – an acid digestion of 1 part Nitric to 3 parts Hydrochloric, typically used for metals such as gold that do not easily
enter solution through normal digestion methods, a method which has been in use for centuries
Dissolved metals filtration – a sample separation process using a 0.45m filter to remove suspended solid particles from a
liquid solution
DTPA Extraction – an extraction process using the chemical diethylene triamine pentaacetic acid
Hot plate digestion – an acid digestion process typically used for liquid samples, refers to EPA method 3010A
Microwave digestion – a microwave-assisted acid digestion process typically used for sludge, oil, soil and sediment samples,
refers to EPA method 3051A
Soxhlet Extraction – an extraction process typically used when the desired analyte has limited solubility in a solvent
SPLP – Synthetic Precipitation Leaching Procedure: an extraction process that mimics long-term rain/groundwater leaching of
chemicals from waste material, extracted by different methods depending on whether the sample is from east or west of
the Mississippi River
Suspended metals filtration – a sample separation process using a 0.45m filter to trap and retain suspended solid particles in
a liquid solution
TCLP – Toxicity Characteristic Leaching Procedure: an extraction process that mimics long-term rain/groundwater leaching of
chemicals from waste material
Total metals digestion – a digestion process in which acid is used to force both soluble and insoluble metals into solution,
commonly refers to EPA methods 3051 & 3052, occasionally refers to EPA methods 3005, 3010, 3015, 3020 and others
Total recoverable metals digestion – a digestion process in which hot dilute mineral acid is used to force both soluble and
insoluble metals into solution, refers to EPA method 3005
Wyoming Leachate Procedure – an extraction process typically for pit closure analysis and rarely used outside Wyoming
ZHE – Zero Headspace Extraction: an extraction process for volatile and semi-volatile compounds
17 Wyoming Analytical Laboratories, Inc. July 2016 Prices subject to change without notice.
Analyses Alkalinity – carbonate and bicarbonate
ABP – Acid-Base Potential
AP – Acid Potential
BNA – Base, Neutral, Acid: searches for a specific list of semi-volatile organic compounds
BOD – Biochemical Oxygen Demand
BTEX – benzene, toluene, ethylbenzene, xylenes
COD – Chemical Oxygen Demand
DO – Dissolved Oxygen
DRO – Diesel Range Organics: searches for hydrocarbons in the C10 to C32 range
ESP – Exchangeable Sodium Percentage
Fuel ID (also Hydrocarbon Fingerprint analysis) – determines presence and quantity of hydrocarbons
GRO – Gasoline Range Organics: searches for hydrocarbons in the C6 to C10 range
H2S – hydrogen sulfide (also sulfide)
Hardness – presence of calcium and magnesium
Hydrocarbon Fingerprint Analysis (also Fuel ID) – determines presence and quantity of hydrocarbons
LOI – Loss on Ignition: determines the percentage of the sample that volatilizes when burned at a certain temperature
MPN – Most Probable Number: estimates the number of bacteria colonies in the sample
MTBE – methyl tertiary-butyl ether
NP – Neutralization Potential
PAH – Polynuclear Aromatic or Polyaromatic Hydrocarbons: searches for a specific list of semi-volatile organic compounds
PCBs – polychlorinated biphenyls: searches for a specific list of semi-volatile organic compounds
pH – determines whether the sample is acid, base or neutral in standard units
RCRA metals – determination of metals under the Resource Conservation & Recovery Act of 1976: Cr, As, Se, Ag, Cd, Ba, Hg, Pb
SAR – Sodium Absorption Ratio
SVOA (also SVOC) – Semi-Volatile Organic analysis: searches for typical semi-volatile organic compounds
TDS – Total Dissolved Solids
TOC – Total Organic Carbon
Total Alkalinity – carbonate, bicarbonate and hydroxide
TOX – Total Organic Halogens
TPH – Total Petroleum Hydrocarbons
TPH 1664 – Oil & Grease: determines the presence of a wide range of hydrocarbons
TPH 418.1 – TPH by Freon extraction: rarely used outside Wyoming
TPH GRO +DRO – TPH by GC: determination of hydrocarbons in the C6 to C32 range with detection limits as low as ppm
GRO by GC-MS –determination of hydrocarbons in the C6 to C10 range with detection limits as low as ppb
TVPH – Total Volatile Petroleum Hydrocarbons: determination of volatile hydrocarbons in a gaseous sample
TRI Metals – determination of metals listed under the Toxic Release Inventory: Be, Al, V, Cr, Mn, Co, Ni, Cu, Zn, As, Se, Mo, Ag,
Cd, Sb, Ba, Hg, Tl, Pb, Th
TSS – Total Suspended Solids
TS – Total Solids
TVS – Total Volatile Solids
VOA (also VOC) – Volatile Organic analysis: searches for typical volatile organic compounds
18 Wyoming Analytical Laboratories, Inc. July 2016 Prices subject to change without notice.
Containers, Preservatives, Holding Times
Water – All Types Analyte Method Container Preservative Holding Time
Acidity 305.2 1 - 250mL poly 4oC 14 days
Alkalinity 310.1 1 - 250mL poly 4oC 14 days
Ammonia SM4500-NH3 1 - 250mL poly 4oC, 1.5mL 1:1 H2SO4 28 days
Anions 300 (IC method) 1 - 250mL poly 4oC 28 days
BOD SM5210B / 405.1 1 - 1L poly 4oC 48 hours
BNA 8270 / 625 1 - 1L amber 4oC 7 days
Carbon, Total Organic (TOC water) 415.1 (HACH) 1 - 125mL amber 4oC, 2mL 1:1 H2SO4 28 days
Chloride by titration SM4500B / D512 1 - 250mL poly 4oC 48 hours
Chloride, Residual SM4500 1 - 250mL amber 4oC Immediately
Chromium, Hexavalent 3060A mod 1 - 250mL amber 4oC 24 hours
COD 410.3 1 - 250mL poly 4oC, 2mL 1:1 H2SO4 28 days
Coliform (MPN) Quanti-Tray 2 - 110mL, sterile 4oC, Na2S2O3 powder 24 hours
Coliform (Pass/Fail) ReadyCult 1 - 110mL, sterile 4oC, Na2S2O3 powder 24 hours
Conductivity (Specific Conductance) 120.1 1 - 250mL poly 4oC 28 days
Cyanide, Total & Amenable 9012A (Spot Test) 1 - 1L poly 4oC,
10mL 10N NaOH 14 days
Dissolved Oxygen SM4500-OC 1 - 1L poly none Immediately
Gross Alpha, Beta 9310 / 900.0 2 - 1L poly 5mL 1:1 HNO3 180 days
Herbicides, Pesticides Various 2 - 1L amber 4oC 7 days
Hydrocarbon Fingerprint 8015M 1 - 1L amber 4oC, 5mL 1:1 HCI 7 days
Langelier Index SM2330B 1 - 1L poly 4oC ASAP
Metals, Dissolved 6010, 6020 1 - 250mL poly 4oC, filt, 2mL 1:1 HNO3 28 days
Metals, Total 6010, 6020 1 - 250mL poly 4oC 28 days
Methanol, Ethanol, Propanol, Glycol 8015M 2 - 40mL vial 4oC 14 days
Nitrogen, Kjeldahl SM4500 Norg 1 - 1L poly 4oC, 2mL 1:1 H2SO4 28 days
Oil & Grease 1664 1 - 1L amber 4oC, 5mL 1:1 HCl 28 days
PAH 8270, 8310 / 610 1 - 1L amber 4oC, dark 7 days
PCBs 8082 / 608 1 - 1L amber 4oC 7 days
pH 150.1 1 - 250mL poly 4oC Immediately
Phenolics 420.1 1 - 1L amber 4oC, 2mL 1:1 H2SO4 28 days
Purgeable Halocarbons 8260, 8010 / 624 2 - 40mL vials 4oC 14 days
Ra226, Ra228 9315, 9320 2 - 1L poly 5mL 1:1 HNO3 180 days
Solids, TS/TDS/TSS/TVS 160 1 - 500mL poly 4oC 7 days
Sulfate, gravimetric 375.3 1 - 500mL poly 4oC ASAP
Sulfide Hach HS-C 1 - 500mL amber 4oC, 2.5mL ZnOAc 7 days
Surfactants (MBAS) SM5540C mod 1 - 250mL amber 4oC 48 hours
SVOAs 8270 / 625 1 - 1L amber 4oC 7 days
Halogens, Total Organic (TOX) 9020B 1 - 500mL amber 4oC, 3mL 1:1 H2SO4 7 days
TPH 418.1 418.1 (freon) 1 - 1L amber 4oC, 5mL 1:1 HCI 28 days
TPH DRO 8015M 1 - 1L amber 4oC, 5mL 1:1 HCI 7 days
TPH GRO, BTEX, MTBE 8015M / 8260 2 - 40mL vials 4oC, 0.5mL 1:1 HCI 14 days
Turbidity 180.1 1 - 250mL poly 4oC 48 hours
VOAs 8260 / 624 2 - 40mL vials 4oC, 0.5mL 1:1 HCI 14 days
Float/Sink Analysis (Light Weight Aggregate) Particle Size Method Sample Weight Holding Time
Sand C123 0.5 pounds 90 days
3/8 inches C123 3 pounds 90 days
1/2 to 3/4 inches C123 7 pounds 90 days
1 to 1.5 inches C123 11 pounds 90 days
2 inches or larger C123 22 pounds 90 days
19 Wyoming Analytical Laboratories, Inc. July 2016 Prices subject to change without notice.
Soil, Solid Waste, Sludge Analyte Method Container Preservative Holding Time
BNA 8270 / 625 1 - 4oz jar 4oC 14 days
Carbon, Total Organic (TOC solid/soil) Various 1 - 4oz jar 4oC ASAP
Herbicides, Pesticides Various 2 - 8oz jar 4oC 7 days
Hydrocarbon Fingerprint 8015M 1 - 4oz jar 4oC 14 days
Ignitability 1030 1 - 8oz jar 4oC ASAP
Metals, Dissolved 6010, 6020 1 - 4oz jar none 180 days
Metals, Total 6010, 6020 1 - 4oz jar none 180 days
PAH 8100, 8270, 8310 1 - 4oz jar 4oC 14 days
Paint Filter Test 9095B 1 - 8oz jar 4oC 28 days
PCBs 8082 1 - 4oz jar 4oC 14 days
pH / Corrosivity Various 1 - 4oz jar none Immediately
Phenolics 8040, 8270 1 - 8oz jar 4oC 7 days
Purgeable Halocarbons 8260, 8010, 8240 1 - 4oz jar 4oC 14 days
Reactivity – CN, Sulfide Various 1 - 4oz jar 4oC, dark ASAP
Saturated Paste Extraction 60-2,3 1 - 8oz jar 4oC 14 days
SVOAs 8270 / 625 1 - 4oz jar 4oC 14 days
TCLP extraction 1311 1 - 8oz jar 4oC 28 days
TPH 418.1 418.1M 1 - 4oz jar 4oC 14 days
TPH DRO 8015M 1 - 4oz jar 4oC 14 days
TPH GRO, BTEX, MTBE 8015M / 8260 1 - 4oz jar 4oC 14 days
VOAs 8260 1 - 4oz jar 4oC 14 days
Wyoming Leachate Procedure WOGCC 4/27/99 2 - 8oz jar 4oC 28 days
Coal, Biomass, Cogeneration, Ash, Construction Material Analyte Method Sample Wt, Vol - un-prepped Sample Wt, Vol - prepped
Ash Fusion – Raw Sample D1857 1 - 1gal Ziploc 100 grams
Ash Fusion – Pre-ashed D1857 N/A 5 grams
Bulk Density D155 / C559 1 - 1gal Ziploc N/A
Chloride, Fluoride, Metals (any part) Various 1 - 1qt Ziploc 5 grams
Elemental Ash Analysis – Raw Sample D432 1 - 1gal Ziploc 100 grams
Elemental Ash Analysis – Pre-ashed D432 N/A 5 grams
Equilibrium Moisture D1412 1 - 1qt Ziploc (double bag) 15 grams
Free Swelling Index D720 1 - 1qt Ziploc (double bag) 5 grams
Hardgrove Grindability Index D409 100 grams 60 grams > 8 mesh size
Proximate, Ultimate, Btu (any part) Various 1 - 1gal Ziploc (double bag) 10 grams
Specific Gravity D167 1 - 1qt Ziploc N/A
Petroleum – Gasoline, Diesel, Oil, Waste Oil, Grease, Wax Analyte Method Container Holding Time
Acid Number D974 1 - 250mL Nalgene 90 days
Basic Fuel Oil Analysis (any part) Various 1 - 250mL Nalgene 90 days
Chloride, Bromide, Iodide XRF 1 - 40mL vial 90 days
Cloud Point D5773 1 - 250mL Nalgene 90 days
Distillation D86 1 - 500mL Nalgene 90 days
Flash/Fire Point Various 1 - 250mL Nalgene 90 days
Fluoride D3761 / D5987 1 - 40mL vial 90 days
Freeze Point D7153 1 - 250mL Nalgene 90 days
Pour Point D5949 / D5950 1 - 250mL Nalgene 90 days
Simulated Distillation Various 2 - 40mL vials 90 days
Sulfur by XRF D2622 1 - 40mL vial 90 days
Viscosity Various 1 - 250mL Nalgene 90 days
Water in Oil D95 1 - 250mL Nalgene 90 days