PRICE LIST Prestex - Pegler Yorkshire · 2014. 3. 3. · Pegler Yorkshire Price list – 3rd March...

PrestexPRICE LIST3RD MARCH 2014

Price List Covers.indd 14 26/02/2014 12:2816972 PY_PRESTEX_PL_03.14_v3.indd 1 27/02/2014 12:45

22

PEGLER YORKSHIREPRESTEX PRICE LISTCONTENTS

FittingsPrestex Compression Fittings – Type A 3-5

Prestex Chromium Plated Compression Fittings – Type A 5

Prestex Backnuts 6

TMVPrestex In Line Thermostatic Controllers 6

OptiflushOptiflush Urinal Flush Controllers 6

ValvesPressure Gauge and Pressure Reducing Valve 7

Drain Cocks 7

Servicing Valves 7

Spring Check Valves 7

Bibtaps and Ball Valve Bibtaps 8

Floatvalves 9-10

Stopvalves 11

Compression Stopvalves 11

PL Compression Stopvalves for Polyethylene Pipe 11

Compression Gate Valves 11

Bulldog Compression Quarter Turn Ball Valves 12

Heating Valve Accessories 12

Automatic Air Vent 12

Bulldog Quarter Turn Ball Valve Accessories 13

Maintaining a policy of continual product development Pegler Yorkshire Group Limited reserve the right to change specifications, design, materials and prices of products listed in this price list without prior notice.

All tee sizes are UK designation throughout this price list.

16972 PY_PRESTEX_PL_03.14_v3.indd 2 27/02/2014 12:45

Price list – 3rd March 2014Pegler Yorkshire

23

Prestex Compression Fittings – Type AManufactured to EN 1254: 1998 (formerly BS 864-2) for use with copper tube to BS EN1057: 1996 (formerly BS 2871: Part 1) or stainless steel tube to BS 4127-2: 1994.

35Flanged Tank ConnectorCopper x flange and backnutBrass

SIZE BOX QTY CODE £ EACH

15mm 5 704007 6.7822mm 5 704008 7.4928mm 5 704009 21.75 35mm 1 704010 48.97 42mm 1 704011 63.74 54mm 1 704012 94.28

37 Stop EndCopper x blank endBrass


15mm 5 707007 4.5522mm 5 707008 5.51 28mm 5 707009 17.17

37A Blanking-off Disc†

Brass


15mm 5 744007 1.1422mm 5 744008 1.7428mm 5 744009 4.17

40CO Crossover CouplingCopper x copperBrass


15mm 5 732007 18.8322mm 10 732008 27.11

40 Straight CouplingCopper x copperBrass


8mm 5 709004 9.1810mm 5 709005 9.1510 x 8mm 5 709015 9.4215mm 5 709017 2.8915 x 8mm 5 709027 11.0615 x 10mm 5 709037 9.8715 x 12mm 5 709047 11.5718 x 15mm 5 709056 14.7822mm 5 709058 5.0322 x 15mm 5 709068 14.9428mm 5 709079 16.5028 x 22mm 5 709089 23.1435mm 1 709100 36.2042mm 1 709101 50.3454mm 1 709102 71.94

40R Repair Coupling100mm long (slip) Copper x copperBrass


15mm 5 732001 15.57

41 Straight CouplingCopper x female ironBrass


8mm x 1/4" 5 710004 9.0910mm x 1/4" 5 710005 8.6710mm x 3/8" 5 710015 8.2810mm x 1/2" 5 710025 8.0615mm x 1/4" 5 710027 9.8015mm x 3/8" 5 710037 9.8115mm x 1/2" 5 710047 3.2915mm x 3/4" 5 710057 11.3322mm x 1/2" 5 710058 10.6522mm x 3/4" 5 710068 4.9922mm x 1" 5 710078 10.0428mm x 1" 5 710079 12.7735mm x 11/4" 1 710080 31.4042mm x 11/2" 1 710081 44.3254mm x 2" 1 710082 64.85

42Straight CouplingCopper x male ironBrass

42WStraight CouplingCopper x male iron 38mm(11/2") screw with backnutBrass


15mm x 1/2" 5 712007 14.4722mm x 3/4" 5 712008 18.2228mm x 1" 5 712009 28.59

† Product not kitemarkedUse prefix DR on pattern numbers when ordering DZR brass fittings.

Brass DZR BrassPX Range

43 Straight Swivel Tap ConnectorCopper x union nutBrass


15mm x 1/2" 5 713007 6.2415mm x 3/4" 5 713017 16.4022mm x 3/4" 5 713018 13.95

43B Bent Swivel Tap ConnectorCopper x union nutBrass


15mm x 1/2" 5 714007 9.8722mm x 3/4" 5 714008 23.94

44 ElbowCopper x copperBrass


8mm 5 715004 10.2210mm 5 715005 11.1415mm 5 715007 3.5622mm 5 715008 6.0022 x 15mm 5 715018 20.4628mm 5 715019 20.4228 x 15mm 5 715012 30.6628 x 22mm 5 715013 24.8135mm 1 715020 47.6842mm 1 715021 70.9954mm 1 715022 113.40

45 ElbowCopper x male ironBrass


15mm x 1/2" 5 717017 5.9822mm x 1/2" 5 717037 16.0122mm x 3/4" 5 717018 7.7122mm x 1" 5 717028 15.8128mm x 1" 5 717029 19.8535mm x 11/4" 1 717030 45.6342mm x 11/2" 1 717031 65.6954mm x 2" 1 717032 107.35

45W ElbowCopper x male iron 38mm (11/2") screw with backnutBrass


22mm x 3/4" 5 719008 24.08

45TP Elbow with Taper Thread†

Copper x male iron (BS21)Brass


15mm x 1/2" 5 717087 9.42


8mm x 1/4" 5 711004 7.8410mm x 1/4" 5 711005 8.1010mm x 3/8" 5 711015 8.1010mm x 1/2" 5 711025 8.1415mm x 1/4" 5 711047 9.2815mm x 3/8" 5 711057 9.8015mm x 1/2" 5 711067 2.7015mm x 3/4" 5 711077 11.1122mm x 1/2" 5 711028 11.1422mm x 3/4" 5 711038 4.3722mm x 1" 5 711048 5.9828mm x 3/4" 5 711049 18.8328mm x 1" 5 711059 8.3828mm x 11/4" 5 711069 36.4435mm x 1" 1 711070 38.4035mm x 11/4" 1 711080 28.8842mm x 11/2" 1 711081 46.3154mm x 2" 1 711082 64.43



24† Product not kitemarked



46 ElbowCopper x female ironBrass


15mm x 3/8" 5 720007 12.7515mm x 1/2" 5 720017 9.59 15mm x 3/4" 5 720027 18.9122mm x 1/2" 5 720028 14.7922mm x 3/4" 5 720038 14.1522mm x 1" 5 720048 22.2828mm x 3/4" 5 720095 26.5828mm x 1" 5 720049 24.3335mm x 11/4" 1 720050 46.6542mm x 11/2" 1 720051 65.6954mm x 2" 1 720052 132.67

50 Equal TeeAll ends for copperBrass


10mm 5 721005 17.3315mm 5 721007 5.0722mm 5 721008 8.3828mm 5 721009 35.9535mm 1 721010 63.0442mm 1 721011 106.6854mm 1 721012 169.83

50A Tee – both ends reducedAll ends for copperBrass


15 x 22mm 5 722007 22.08

50B Tee – one end reducedAll ends for copperBrass


22 x 15mm 5 723008 23.3028 x 15mm 5 723009 37.8728 x 22mm 1 723019 36.49

50CTee – branch reducedAll ends for copperBrass


22 x 15mm 5 724008 20.0128 x 15mm 5 724009 34.4928 x 22mm 5 724019 34.49

50DTee – one end and branch reducedAll ends for copperBrass


22 x 15mm 5 725008 22.41

51H Heater Tee Copper branch x female iron x male ironBrass


15mm x 1/2" 5 726007 26.88

52 TeeCopper x female iron end Brass


15mm x 1/2" 5 727007 18.9122mm x 1/2" 5 727008 24.2422mm x 3/4" 5 727018 27.31

54TeeCopper x female iron branch Brass


15mm x 1/2" 5 728007 15.31 22mm x 1/2" 5 728008 24.00 22mm x 3/4" 5 728018 23.73 28mm x 1/2" 5 728019 33.81 28mm x 3/4" 5 728039 44.37 28mm x 1" 5 728049 42.75

54XTee with BracketCopper x female iron branch Brass


15mm x 1/2" 5 729007 23.60

57XBibtap Wall Flange (3 hole)Copper x female iron Brass


15mm x 1/2" 5 7B2007 15.85

58XBibtap Wall Flange (2 hole)Copper x female ironBrass


15mm x 1/2" 5 730007 13.1622mm x 3/4" 5 730008 27.66

Prestex Compression Fittings – Type A (contd)

102/3/4Reducing Set†

For reducing type A ends to accept smaller pipeBrass


10 x 8mm 5 733005 4.7115 x 8mm 5 733027 4.7115 x 10mm 5 733037 4.7115 x 12mm 5 733047 4.7122 x 15mm 5 733048 5.6128 x 15mm 5 733049 8.2228 x 22mm 5 733059 8.2235 x 15mm 1 733060 16.2035 x 22mm 1 733070 16.20 35 x 28mm 1 733080 16.20 42 x 15mm 1 733081 25.61 42 x 22mm 1 733091 25.61 42 x 28mm 1 733101 25.61 42 x 35mm 1 733111 25.6154 x 15mm 1 733120 44.25 54 x 22mm 1 733112 44.25 54 x 28mm 1 733122 44.25 54 x 35mm 1 733132 44.25 54 x 42mm 1 733142 44.25

103Brass Cone†

For type A joints


6mm 10 860043 0.858mm 10 860044 0.8510mm 10 860045 0.8512mm 10 860046 1.1615mm 10 860047 1.16 18mm 10 860013 1.53 22mm 10 860048 1.55 28mm 5 860309 2.05 35mm 5 860050 3.01 42mm 5 860051 5.81 54mm 5 860052 9.33

C103Copper Cone†

For type A joints


8mm 10 860004 0.8510mm 10 860005 0.8515mm 50 860007 1.1622mm 10 860008 1.5528mm 5 860009 2.0535mm 5 860010 3.1342mm 5 860011 5.8154mm 5 860012 9.333/4" 10 860018 1.55



25

Prestex Compression Fittings – Type A (contd)

105Type A Capnut


8mm 10 860064 2.1410mm 10 860065 2.1412mm 10 860066 2.14 15mm 25 860097 2.40 18mm 10 860067 3.6622mm 10 860068 4.10 28mm 10 860069 5.60 35mm 5 860070 7.71 42mm 5 860071 11.45 54mm 5 860072 19.86

Prestex Chromium Plated Compression Fittings – Type A

37ACPBlanking Off Disk

Brass


15mm 1 7B3100 1.94

37CPStop EndCopper x blank endBrass


15mm 1 7B3007 6.17

40CPStraight CouplingCopper x copperBrass


15mm 5 7B4007 4.2722mm 1 7B4028 7.4728mm 1 7B4029 23.02

41CPStraight CouplingCopper x female ironBrass


15mm x 1/2" 1 7B5007 4.6422mm x 3/4" 1 7B5008 7.1628mm x 1" 1 7B5009 17.35

42CPStraight CouplingCopper x male ironBrass


15mm x 1/2" 5 7B6027 3.8522mm x 3/4" 1 7B6048 6.2628mm x 1" 1 7B6059 12.50

43CPStraight Swivel Tap ConnectorCopper x union nutBrass


15mm x 1/2" 1 7B7007 9.3122mm x 3/4" 1 7B7008 14.47

43BCPBent Swivel Tap ConnectorCopper x union nutBrass


15mm x 1/2" 1 7B8017 15.24


Brass DZR BrassPX RangeNote: Metric size fittings have bodies and capnuts in DZR metal.

45CPElbowCopper x male ironBrass


15mm x 1/2" 1 7C1007 6.93

46CPElbowCopper x female ironBrass


15mm x 1/2" 1 7C2007 13.02

50CPEqual TeeAll ends for copperBrass


15mm 5 7C3007 7.2722mm 1 7C3008 12.0428mm 1 7C3009 49.38

50CCPTee – branch reducedAll ends for copperBrassSIZE BOX QTY CODE £ EACH

22 x 15mm 1 7C6008 26.6828 x 15mm 1 7C6009 49.38

58XCPBibtap Wall Flange

BrassSIZE BOX QTY CODE £ EACH

15mm x 1/2" 1 7D3007 15.98 22mm x 3/4" 1 7D3008 37.00

44CPElbowCopper x copperBrassSIZE BOX QTY CODE £ EACH

15mm 5 7B9007 5.1522mm 1 7B9008 8.7228mm 1 7B9009 28.12 35mm 1 7B9010 65.07

102/3/4CPReducing Set†

For type A jointsBrass


22 x 15mm 1 7D3100 7.53

105CPType A Capnut

Brass


8mm 10 860104 4.4010mm 10 860105 4.4012mm 10 860106 4.40 15mm 10 860117 4.76 22mm 10 860108 8.16 28mm 10 860109 11.1135mm 1 817200 15.38

Prestex PL Compression Fittings for Polyethylene PipeManufactured in metric sizes to EN 1254-3 and EN 1254-4 for use with medium density pipe to BS 6572: 1985 and BS 6730: 1986. Imperial size ends to BS 864: 3: 1975 for use with pipe to BS 1972: 1967 and BS 3284: 1967.

PL105Metric Size Capnuts


50mm 5 860211 16.3963mm 1 860212 20.51

915Heavy Pattern Brass BacknutFemale parallel thread to BS 2779


1/2" 10 817071 2.743/4" 10 817072 3.011" 5 817073 4.73

915L Light Pattern Brass BacknutFemale parallel thread to BS 2779


1/2" 10 817074 2.513/4" 10 817075 2.811" 5 817076 3.5311/4" 1 817077 4.0411/2" 1 817082 4.842" 1 817089 9.51

Prestex Backnuts


26


Note: Metric size fittings have bodies and capnuts in DZR metal.

Prestex In Line Thermostatic Controllers D 08

P402In Line Thermostatic Mixing ValveWith flanged connections for easy service. Copper x copper (TMV3 D08)


15mm 1 5A1101 137.6022mm 1 5A1102 171.99

P402UAIn Line Thermostatic Mixing ValveWith flat face unions for easy servicing. Angle valves with isolating valves, filters and test points.Copper x copper (TMV3 D08)


15mm 1 5A1103 220.1522mm 1 5A1104 228.41

P404In Line Thermostatic Mixing ValveWith flat face unions for easy servicing. Copper x copper (TMV2)


15mm 1 5A1105 89.4422mm 1 5A1106 110.08

Prestex In Line Thermostatic Controllers

P405UAXIn Line Thermostatic Mixing ValveWith flat face unions for easy servicing. Copper x copper TMV2 and TMV3 D08


15mm 1 5A1144 225.5022mm 1 5A1145 223.81

P405UAIn Line Thermostatic Mixing ValveWith flat face unions for easy servicing. Angle valves with isolating valves, filters and test points.Copper x copper (TMV2 and TMV3 DO8)


15mm 1 5A1142 220.1522mm 1 5A1143 228.41

P405In Line Thermostatic Mixing ValveWith flat face unions for easy servicing.Copper x copper (TMV2 and TMV3 DO8)


15mm 1 5A1140 137.6022mm 1 5A1141 171.99

P404UAIn Line Thermostatic Mixing ValveWith flat face unions for easy servicing. Angle valves with isolating valves, filters and test points.Copper x copper (TMV2)


15mm 1 5A1107 151.3622mm 1 5A1108 165.12

Prestex In Line Thermostatic Controllers D 08

TX405In Line Thermostatic Mixing ValvePush Fit x Push Fit, with flat face unions for easy servicing Tectite ends


15mm 1 5A1150 143.0022mm 1 5A1151 178.00

TMV 3/2 Filter Kit (Tectite ends)


15mm22mm

11

5A11565A1157

45.7959.32

TX405UAIn Line Thermostatic Mixing ValvePush Fit x Push Fit, with flat face unions for easy servicing Tectite ends


15mm 1 5A1152 230.6522mm 1 5A1153 241.01

TX405UAXIn Line Thermostatic Mixing ValvePush Fit x Push Fit, with flat face unions for easy servicing angle valves with isolating valves filters & test points Tectite ends


15mm 1 5A1154 235.6022mm 1 5A1155 246.40

Optiflush Urinal Flush Controllers

OP1Optiflush Passive Infra Red Urinal Flush Controller - Battery VersionCopper x copper


15mm 1 599001 521.76

OP2Optiflush Passive Infra Red Urinal Flush Controller - Mains VersionCopper x copper


15mm 1 599002 521.76


27



Brass DZR BrassPX RangeNote: Metric size fittings have bodies and capnuts in DZR metal.

833Brass DraincockType A to BS 2879/2 Male taper thread to BS 21


1/2" 20 542007 9.853/4" 10 542008 19.47

833LSBrass Lockshield DraincockType A to BS 2879/2 Male taper thread to BS 21


1/2" 20 542017 18.07

833GMGunmetal DraincockType A to BS 2879/2 Male taper thread to BS 21


1/2" 20 542027 20.713/4" 1 542028 36.351" 1 542029 108.79

833GMLSGunmetal Lockshield DraincockType A to BS 2879/2 Male taper thread to BS 21


1/2" 20 542037 24.813/4" 1 542038 38.491" 1 542039 112.84

838Brass DraincockType A to BS 2879/2 Plain inlet to BS 864/2


1/2" 20 545007 12.23

834Brass DraincockType B Male taper thread to BS 21


1/2" 25 543007 7.75

Prestex Drain Cocks

Prestex Drain Cocks

806Chromium Plated Straight Pattern Brass Service ValveCopper x swivel union


15mm x 1/2"* 25 521007 8.50

808Chromium Plated Straight Pattern Brass Service ValveCopper x copper


15mm 10 523007 8.7422mm 10 523008 17.61

Prestex Servicing Valves to BS 6675

807Chromium Plated Angle Pattern Brass Service ValveCopper x swivel union


15mm x 1/2" 25 522007 9.65

809Chromium Plated Straight Pattern Brass Washing Machine TapHot or cold copper x male iron


15mm x 3/4"* 25 524008 6.22

809BChromium Plated Angle Pattern Brass Washing Machine TapHot or cold copper x male iron


15mm x 3/4" 20 524009 8.50

809TChromium Plated Tee Pattern Brass Washing Machine TapHot or cold copper x male iron


15mm x 3/4" 20 524010 9.79

8028Combined Double Check Valve and Service ValveDZR metal, nickel plated Copper x copper


15mm 1 551020 28.47

Prestex Spring Check Valves to BS6282

45SDSlow Bend with Draincock


22mm x 3/4" 10 718008 34.2928mm x 1" 1 718009 46.94

Prestex Pressure Gauge and Pressure Reducing Valve

PGPressure Gauge Pressure gauge 0 - 10 bar. Reference pointer. Rear entry/connection. Max. working temperature 80ºC.SIZE BOX QTY CODE £ EACH

1/4" 1 5A2003 18.35

PT5 PRVPressure Reducing Valve complete with Gauge and Tectite ends


15mm 1 5A2050 93.36



28

* Tested to EN331 Gas families 1,2,3.

Prestex Bibtaps to BS 1010.2: 1973 Prestex Ball Valve Bibtaps

701Light Pattern Brass Bibtap†

Crutch top

723Light Pattern Brass Hose Union Bibtap†

Crutch top


1/2" 10 511007 25.593/4" 5 511008 50.36

723 ATLight Pattern Brass Hose Union Bibtap† Crutch top Screwed 3/4" American thread on nose


1/2" 10 511037 28.34

PB52HUChrome plated hose union20mm inlet


1/2" 10 2620213/4" 10 262022

PB50HUChrome plated hose union ball type bibtap Red lever


1/2" 10 2620011/2" (Spigot) 10 262004 3/4" 10 262002

Refer to Pegler

price list

PB50Chrome plated ball type bibtap with 3/4" American thread on noseRed lever


1/2" 10 262003 Refer to Pegler

price list

Refer to Pegler

price list


1/2" 10 509011 23.813/4" 5 509013 32.39

Prestex Bibtaps to BS 1010.2: 1973

141Brass Bibtap (BS 1010)Crutch top


1/2" 1 508017 24.973/4" 1 508018 38.29

141HUBrass Hose Union Bibtap (BS 1010)Crutch top


1/2" 10 508037 31.713/4" 4 508038 54.29

141HU FGK Brass Hose Union Bibtap with Ferrule Guard and Key (BS 1010)


1/2" 1 508047 44.683/4" 1 508048 68.85

142HUBibplusCombined hose union bibtap with integral double check valve DZR metal Crutch top


1/2" 5 508107 31.20

141HU ECChromium Plated Brass HoseUnion Bibtap (BS 1010) Cross top Hot or cold


1/2" (hot) 10 311047 See1/2" (cold) 10 311057 Performa price list

142HU FGKBibplusCombined hose union bibtap with integral double check valve and ferrule guard and key DZR metal


1/2" 1 508117 40.65

141ECChromium Plated Brass Bibtap (BS 1010)Cross top Hot or cold


1/2" (hot) 10 311007 1/2" (cold) 10 311017 3/4" (hot) 4 311028 3/4" (cold) 4 311038

Refer to Performaprice list



29

Prestex Floatvalves to BS 1212

Specification key: B = Brass, N = Nylon, Bz = Bronze, R = Rubber Note: Shading denotes variation to standard 1/2" product.

PRODUCT PATTERN PISTON BACKNUT SEAT TAIL LEVER BOX ORDER PRICE NUMBER SIZE MATERIAL MATERIAL BORE LENGTH LENGTH QTY CODE EACH £

857 N 1/2" N B No 3 (1/8") 11/4" 83/4" 20 514007 10.67 857 N-Z 1/2" N N No 3 (1/8") 11/4" 83/4" 20 514017 10.24 857 N-S 1/2" N B No 5 (3/16") 11/4" 83/4" 20 514018 13.43 857 N-Y 1/2" B B No 3 (1/8") 11/4" 83/4" 10 514027 15.90 857 N-X 1/2" N B No 3 (1/8") 11/4" 101/2" 10 514037 13.43 857 N-W 1/2" N B No 3 (1/8") 17/8" 101/2" 10 514047 15.34 857 N-V 1/2" B B No 3 (1/8") 17/8" 101/2" 10 514057 18.15 857 N-U 1/2" N B No 3 (1/8") 21/2" 101/2" 10 514067 22.92 857 N 3/4" B B No 6 (1/4") 11/4" 13" 5 514008 57.30 857 N 1" Bz B No 9 (3/8") 11/2" 16" 1 514009 141.16


859 N 1/2" B B No 9 (3/8") 11/4" 83/4" 10 515007 24.13 859 N-V 1/2" B B No 9 (3/8") 17/8" 101/2" 10 515027 26.53 859 N 3/4" B B No 13 (1/2") 11/4" 13" 5 515008 57.30

BS 1212 Part OneHigh PressureNylon seat


857 B-Y 1/2" B B No 3 (1/8") 11/4" 83/4" 10 514097 19.60 857 B-V 1/2" B B No 3 (1/8") 17/8" 101/2" 10 514127 21.91 857 B 3/4" B B No 6 (1/4") 11/4" 13" 5 514078 61.52 857 B 1" Bz B No 9 (3/8") 11/2" 16" 1 514079 144.80

BS 1212 Part OneHigh PressureBronze seat

BS 1212 Part One Low PressureNylon seat


859 B 1/2" B B No 9 (3/8") 11/4" 83/4" 10 515037 27.20BS 1212 Part OneLow PressureBronze seat

Prestex Floatvalves to BS 1212

BS 1212 Part TwoHigh PressureNylon seat


858 N 1/2" R B No 3 (1/8") 11/4" 83/4" 10 516007 14.41 858 N-Z 1/2" R N No 3 (1/8") 11/4" 83/4" 10 516006 14.22 858 N-V 1/2" R B No 3 (1/8") 17/8" 83/4" 5 516027 27.74 858 N 3/4" R B No 6 (1/4") 11/2" 83/4" 1 516107 44.70

BS 1212 Part TwoHigh PressureBronze seat


858 B 1/2" R B No 3 (1/8") 11/4" 83/4" 5 516037 29.36

BS 1212 Part TwoLow PressureNylon seat


860 N 1/2" R B No 9 (3/8") 11/4" 83/4" 5 517007 34.35



210


Prestex Floatvalves MOH and Equilibrium

855 1/2" N B 1/8" 11/4" 10" 20 518007 16.56 855-Z 1/2" B B 1/8" 11/4" 10" 20 518017 19.52 855 3/4" B B 1/4" 11/2" 13" 10 518008 30.61 855 1" B B 3/8" 11/2" 14" 10 518009 70.25 855 11/4" B B 7/16" 2" 16" 1 518010 204.37 855BRASS 11/2" B B 21/32" 23/16" 26" 1 518013 222.54 855BRASS 2" B B 15/16" 23/16" 26" 1 518014 310.42


856 3/8" B B 7/32" 11/4" 71/4" 20 519006 21.59 856 1/2" N B 7/32" 11/4" 10" 20 519007 22.66 856-Z 1/2" B B 7/32" 11/4" 10" 20 519017 25.57 856 3/4" B B 3/8" 11/2" 13" 10 519008 32.53


901 1/2" B B 3/8" 11/4" 11" 1 520007 52.47 901 3/4" B B 1/2" 11/4" 13" 1 520008 80.62


901 1" B B 3/4" 11/2" 101/16" 1 520009 157.55 901 11/4" Bz Bz 11/64" 17/8" 1013/16" 1 520010 322.80 901 11/2" Bz Bz 13/16" 17/8" 1013/16" 1 520011 339.08 901 2" Bz Bz 11/2" 21/8" 111/8" 1 520012 571.39 901 21/2" Bz Bz 21/4" 3" 19" 1 520300 671.45 901 3" Bz Bz 21/2" 31/2" 20" 1 520305 1088.90 901 4" Bz Bz 3" 4" 21" 1 520310 1426.13 901 6" Bz Bz 4" 5" 23" 1 520315 2987.09

Specification key: B = Brass, N = Nylon, Bz = Bronze, R = Rubber Note: Shading denotes variation to standard 1/2" product.

MOH Portsmouth PatternHigh Pressure

MOH Portsmouth PatternLow Pressure

Brass Equilibrium PatternReduced Bore

GunmetalEquilibrium PatternReduced Bore



211

744FBrass Stopvalve (BS 1010)Crutch topFemale iron x female iron


1/2" 1 513007 26.463/4" 1 513008 40.291" 1 513009 66.03 11/4" 1 513010 120.08 11/2" 1 513011 150.68 2" 1 513012 233.72 3"# 1 513014 708.01

744F IWBrass Stopvalve (BS 1010)Alloy wheelFemale iron x female iron


1/2" 1 513037 30.873/4" 1 513038 45.641" 1 513039 74.6211/4" 1 513040 129.9311/2" 1 513041 160.992" 1 513042 247.57

709Light Pattern Brass Stopvalve†

Crutch top Female iron x female iron


1/2" 10 510007 15.373/4" 5 510008 32.84

89Concealed Chromium PlatedBrass StopvalveHot or cold Female iron x female iron


1/2" 1 510100 34.413/4" 1 510101 52.35

79Chromium Plated Brass Angle Valve Hot or cold Male iron x male iron


1/2" 1 510052 12.92

Prestex Stopvalves to BS 1010.2: 1973

744F ECCPChromium Plated Brass Stopvalve (BS 1010)Cross top Cold Female iron x female iron


1/2" (cold) 10 312017 See taps Performa price list

† Product not kitemarked

Prestex Compression StopvalvesStopvalves manufactured to BS 1010.2: 1973 for use with copper tube to BS EN 1057: 1996 or stainless steel tube to BS 4127.2: 1994.

59Stopvalve (BS 1010)Crutch top Copper x copperBrass


15mm 10 501007 11.9822mm 5 501008 24.1028mm 4 501009 60.63Gunmetal15mm 10 501047 31.8222mm 5 501048 49.19

59ECCPChromium Plated Stopvalve (BS 1010) Cross topHot or cold Copper x copperBrass


15mm (hot) 1 501207 49.4815mm (cold) 1 501217 49.48

69Stopvalve with Draincock (BS 1010) Crutch top Copper x copperGunmetal


15mm 1 503017 56.91

78Chromium Plated Angle Valve Soft SeatHot or cold


1/2" 1 510060 12.92

76Chromium Plated Angle Valve RW


1/2" x 3/8" (10mm) 1 510040 4.771/2" x 1/2" 1 510041 5.05

77Chromium Plated Angle Valve TW


1/2" x 1/2" 1 510045 5.68

Prestex PL Compression Stopvalves for Polyethylene PipeManufactured in metric sizes to BS 1010.2: 1973 for use with medium density pipe to BS 6572: 1985 and BS 6730: 1986.

PL59A Gunmetal Stopvalve (BS 1010)Crutch topPolyethylene x copper


32 x 28mm 1 504059 104.55

63LSGate Valve with Lockshield (BS 5154/B)Copper x copperBrass


15mm 10 506037 19.6122mm 10 506038 31.2428mm 1 506039 51.17

63Gate Valve (BS 5154/B)Copper x copperBrass


15mm 10 506007 17.0722mm 10 506008 28.0728mm 5 506009 48.3835mm 2 506010 82.88

Prestex Compression Gate ValvesGate valves manufactured to BS 5154/B: 1991 for use with copper tube to BS EN 1057: 1996 or stainless steel tube to BS 4127.2: 1994.

15-35mm Brass



212


PB300Chromium Plated BrassFull Bore Ball Valve (Red Lever Handle) PN16SIZE BOX QTY ORDER CODE EN1254 TYPE ‘A’ COMPRESSION £ EACH

15mm 10 254001 12.7522mm 10 254002 16.8828mm 5 254003 23.8935mm 1 254004 38.3042mm 1 254005 51.2354mm 2 254006 76.66

PB300 TChromium Plated BrassFull Bore Ball Valve (Red "T" Handle)PN16

SIZE BOX QTY ORDER CODE EN1254 TYPE ‘A’ COMPRESSION £ EACH

15mm 10 255001 12.7522mm 10 255002 16.8828mm 5 255003 23.89

Bulldog Compression Quarter Turn Ball Valves

PB300*Chromium Plated BrassFull Bore Ball Valve (Yellow Lever Handle)PN16


15mm 10 254011 12.7522mm 10 254012 16.8828mm 5 254013 23.89

PB300 T*Chromium Plated BrassFull Bore Ball Valve (Yellow "T" Handle)PN16


15mm 10 255021 12.7522mm 10 255022 16.8828mm 5 255023 23.89

PB300Chromium Plated BrassFull Bore Ball Valve (Blue Lever Handle)PN16


15mm 10 254021 12.7522mm 10 254022 16.8828mm 5 254023 23.8935mm 1 254024 38.3042mm 1 254025 51.2354mm 2 254026 76.66

* Tested to EN331 Gas families 1,2,3.

PB300 TChromium Plated BrassFull Bore Ball Valve (Blue "T" Handle)PN16


15mm 10 255011 12.7522mm 10 255012 16.8828mm 5 255013 23.89

PB300 GreenQuarter-turn Ball ValveCopper x copperCompression ends with green lever handlePlated brass finish (previously K490L)


15mm 10 4500122mm 8 4500228mm 4 45003

PB300 GreenQuarter-turn Ball ValveCopper x copperCompression ends with green T handlePlated brass finish (previously K490T)


15mm 10 4501322mm 8 45014

Refer to Kuterliteprice list

Refer to Kuterliteprice list

Prestex Heating Valve Accessories

FL1 + Kit Chromium Plated Filling Loop with Capping Off Kit


15mm 1 552003 34.20

Kit (Capping Off Kit)


15mm 1 552004 4.27

Prestex 775 Brass automatic air vent10bar at 120°C


1/2" 1 538009 19.82

Automatic Air Vent



213


Locking Device (for Standard Lever Handle Products)LD1 suits 1⁄4", 3⁄8" and 1⁄2" (15mm) valvesLD2 suits 3⁄4" (22mm), 1" (28mm) and 11⁄4" (35mm) valvesSIZE BOX QTY CODE £ EACH

LD1 10 258001LD2 10 258002

Locking Device (for Standard Lever Handle Products)LD3 suits 11⁄2" (42mm) and 2" (54mm) valvesSIZE BOX QTY CODE £ EACH

LD3 10 258003

Bulldog Quarter Turn Ball Valve Accessories

Refer to Pegler valves

price list


price list


price list

Stem Extension KitPBSEK7 suits 1⁄4", 3⁄8" 1⁄2", 15mmPBSEK8 suits 3⁄4", 1", 11⁄4", 22mm, 28mm, 35mmPBSEK9 suits 11⁄2", 2", 42mm, 54mmPBSEK10 suits 21⁄2" PBSEK11 suits 3", 4"SIZE BOX QTY CODE £ EACH

PBSEK7 10 227027PBSEK8 10 227028PBSEK9 5 227029PBSEK10 5 227030PBSEK11 5 227031


price list

Padlock & KeyPDK3 suits 1⁄4", 3⁄8", 1⁄2" (15mm), 3⁄4" (22mm), 1" (28mm) and 11⁄4" (35mm) valvesPDK4 suits 11⁄2" (42mm) and 2" (54mm) valvesSIZE BOX QTY CODE £ EACH

PDK3 10 258011PDK4 10 258012


price list





214

Notes


215

1. GeneralIn these conditions, reference to the Company shall mean Pegler Yorkshire. All quotations are made and all orders are accepted subject to these conditions. All other terms, conditions or warranties whatsoever are excluded from the contract or any variation thereof unless expressly accepted by the Company in writing. In the event of a conflict between these conditions and the specific terms and conditions of quotation then the latter shall prevail.

2. Electronic Tradinga) If the Company and Buyer agree that electronic trading between them shall be a basis for order processing and invoicing then the Standard Interchange Agreement (1st Edition March 1989) of the EDI Association shall be incorporated into the contract by reference subject to these conditions. b) Electronic orders shall be valid if all the information agreed between the Buyer and the Company as being required is properly set out in the agreed format and the order is transmitted by the Buyer to the Company by reference to the correct identification code and is received by the Company when collecting its electronic mail from the relevant system. c) Each valid electronic order will be deemed accepted by the Company unless the Company communicates rejection of the order to the Buyer by electronic or other means (including telephone) within 24 hours of receipt. Acceptance of an order shall constitute a contract for sale and purchase to which these conditions and the Standard Interchange Agreement shall prevail. d) If the Company and the Buyer agree that invoicing may be done by electronic mail, then payment will be due 30 days after the date of electronic invoice unless agreed otherwise.

3. DeliveryAny date for delivery named by the Company is an estimate only and in no circumstances shall the failure of the Company to deliver on or before the named date either entitle the Buyer to rescind or terminate the contract or make the Company liable in any way for the consequences of any delay.

4. ExportUnless specifically stated otherwise in these conditions all trade terms not specifically covered by these conditions shall be interpreted in accordance with INCOTERMS current on the date of that order.

5. Warranty and Defective Goodsa) Save as otherwise provided by the other conditions of these Conditions, sections 12 to 15 of the Sale of Goods Act 1979 are to be implied into this contract. b) The goods delivered under the Contract shall, where the Contract includes a specification, comply with the specification or, if there is no specification, shall be of normal industrial quality. c) The Buyer does not rely on any statement or representations other than those which have been made in writing by the Company. d) The Buyer must give the Company immediate written notice of any defect in the goods. Such goods shall be returned to the Company and if proved to have been defective at delivery as a result of faulty materials or workmanship, the Company shall at its option replace or repair such goods. Defects in quality or dimension in any delivery shall not be ground for cancellation of the remainder of the order. e) Save for any liability for death or personal injury caused by the Company’s negligence, the Company’s liability in connection with defective goods shall be limited to the repair

or supply of a replacement for the defective goods, and the Company shall not be liable for any other loss or damage including, but not limited to loss of profit, labour costs, damage to property, wasted expenditure or cost of mitigation.

6. Data and Technical InformationThe information contained in the advertising sales and technical literature issued by the Company may be relied upon to be accurate in the exact circumstances in which it is expressed. Any illustrations, performance details, examples of illustrations and methods of assembly and all other technical data in such literature are based on experience and upon trials under test conditions and are provided for general guidance only.

7. Claims For Damage, Shortage or LossNo claim for damage in transit or shortage of delivery can be accepted unless, a separate notice in writing is given to the carrier concerned and to the Company within three days of receipt of the goods, followed by a complete claim in writing within five days of receipt of the goods. No claim for loss of goods in transit can b accepted unless a separate notice in writing is given to the carrier concerned and to the Company, and a complete claim in writing made within 21 days of the date of consignment. Where goods are accepted from the carrier concerned without being checked, the delivery book of the carrier must be signed “not examined”. If a complaint is not made to the Company as herein provided, the products shall be deemed to be in all respects in accordance with the Contract, and the Buyer shall be bound to pay for the same accordingly.

8. Suspension of Deliveriesa) Deliveries may be wholly or partially suspended by the company in the event of:- i. Stoppage, delay or interruption caused to the business of the Company as a result of strikes, lockouts, trade disputes, breakdown, accident or any cause whatsoever beyond the reasonable control of the Company. ii. Any default by the Buyer in making payment of any amounts owed to the Company under this and any other contracts between them. b) In the event of any hostilities (whether war is declared or not) in which Great Britain is involved, or in the event of national emergency, or if the Company’s works should become either directly or indirectly engaged on Government orders as to prevent or delay work on other orders, the Company shall be entitled at any time, on notice to the Buyer, to make partial deliveries only or to determine the contract without prejudice in any case to rights accrued in respect of deliveries already made.

9. Determination of ContractThe Company shall have the right forthwith to determine this and/or any other Contract between the Buyer and the Company by written notice to the Buyer’s last known address (without prejudice to any claim or right the Company might otherwise make or exercise) in any of the following events:- a) If the Buyer shall make default in or commit a breach of any contract with the Company; or b) If any distress or execution shall be levied upon the Buyer’s property or assets; or c) If the Buyer shall make or offer to make any arrangements or composition with creditors, or commit any act of bankruptcy or become insolvent; or d) If any petition or receiving order in bankruptcy shall be presented or made against him; or e) If the buyer shall be a limited Company and become subject of any resolution or petition for winding up or administration; or

f) If a receiver or manager of the Buyer’s undertaking, property or assets or any part thereof shall be appointed.

10. IndemnityThe Buyer will indemnify the Company against all damages, penalties, costs and expenses to which the Company may become liable as a result of work done to the Buyer’s instructions or which infringe any letters, patent or registered design or copyright or any other third party intellectual property rights.

11. PricesThe price payable for the goods shall unless otherwise agreed be the Company’s list price current at the date of despatch. Such prices are inclusive of delivery to the Buyer’s UK mainland delivery point but costs of delivery to any other destinations will be charged to the Buyer.

12. Risk and Titlea) Risk shall pass to the Buyer so that the Buyer is responsible for all loss, damage or deterioration to the goods: i. If the Company delivers the goods by its own transport at the time when the goods or a relevant part thereof arrive at the place of delivery; or ii. In all other circumstances at the time when the goods, or a relevant part thereof leave the premises of the Company whether or not the Company arranges transport and (without prejudice to clause 7) where the goods are delivered by carrier, any claims for loss or damage in transit must be made by the Buyer against the carrier in accordance with the carrier’s conditions. b) Title to the goods supplied under the contract shall only pass to the Buyer when payment in full for all goods supplied under this and all other contracts between the Company and the Buyer has been received by the Company. The Company reserves the immediate right to possession of and at any time may recover all goods in respect of which title has not passed to the Buyer; the Company is hereby authorised by the Buyer to enter upon any premises where such goods are held by or on behalf of the Buyer and recover possession thereof. c) Until title to goods has been passed to the Buyer pursuant to these conditions it shall possess the goods as a Bailee at will of the Company, and the Buyer shall not be entitled to sell or otherwise deal in goods in respect of which title has not passed to the Buyer. If the Buyer acts in breach of these conditions then without prejudice to any other rights of the Company the Buyer shall have a fiduciary duty to account to the Company for the proceeds of any sale save to the extent that any such proceeds exceed the amounts owed to the Company under this and all other contracts between the Company and the Buyer.

13. CancellationCancellation will only be accepted by the Company on condition that all costs and expenses incurred by the Company up to the time of cancellation and all loss of profits and other loss or damage suffered by the Company as a result of such cancellation will be paid forthwith by the Buyer to the Company.

14. Payment of Accountsa) Unless otherwise agreed by the Company in writing, payment shall be settled in full by the last working day of the month following the month in which the goods were despatched, or would have been despatched save for postponement otherwise than due to default on the part of the Company. The Company shall be entitled to submit its invoice on the same day as its delivery advice note or at any time thereafter, save that where delivery

has been postponed at the request of or the default of the Buyer, then the Company may submit its invoice at any time after the goods are ready for delivery or would have been ready in the ordinary course but for the request or default as aforesaid.b) The Company reserves the right to charge interest at a rate up to 5% above Lloyds Bank Base Lending Rate ruling at the time payment is due if payment is not made in accordance with the terms agreed at the time the order is accepted.

15. VATThe prices quoted are exclusive of VAT which will, if applicable, be added to the invoice at the rate then current.

16. Consumer Protection ActIn circumstances where the Company supplies parts or goods to the Buyer for incorporation with, or use ancillary to, any composite goods to be produced, manufactured, processed or supplied by the Buyer then: a) The Buyer shall forthwith on demand produce for inspection by the Company copies of all written instructions, information and warnings in relation to the said composite goods, provided nevertheless that such inspection or right to inspect shall not of itself constitute acceptance or approval on the part of the Company of such instructions, information, or warnings; and b) The Buyer shall indemnify, reimburse and compensate the Company for all losses and damages (including costs, expenses and charges for legal actions in which the Company may be involved) that the Company may incur in the event that any claim or claims are made against the Company pursuant to the Act relating to the said composite goods of the Buyer or parts or goods supplied hereunder in circumstances in which the parts or goods supplied by the Company was either: i. Not the defective part of the said composite goods; or ii. Was only rendered the defective part or became defective goods by reason of actions or omission of the Buyer; or iii. Was only rendered the defective part or became defective goods by reason of instructions or warnings given or omitted by the Buyer or other supplier of the said composite goods supplied hereunder. c) For the purposes of this condition the word “defective” shall be interpreted in accordance with the definition contained in the Act and this condition shall mutatis mutandis apply in relation to equivalent legislation of other states as it applies in relation to the Act.

17. Law and JurisdictionThis contract shall be governed and construed according to the Law of England and the parties hereby agree to submit to the exclusive jurisdiction of the English courts.

PEGLER YORKSHIREPRESTEX PRICE LISTTERMS AND CONDITIONS


UK ENQUIRIES

UK SALES Free Phone: 0800 156 0010 Free Fax: 0808 156 1011 Email: [email protected]

TECHNICAL HELP Free Phone: 0800 156 0050 Free Fax: 0808 156 1012 Email: [email protected]

BROCHURE HOTLINE Free Phone: 0800 156 0020 Free Fax: 0808 156 1011 Email: [email protected]

INTERNATIONAL ENQUIRIES

EXPORT Tel: +44 (0) 1302 855 656 Fax: +44 (0) 1302 730 513 Email: [email protected]

Follow us on

Registered in England Company No. 00401507

All brand names and logo styles are registered trademarks. Maintaining a policy of continual product development, Pegler Yorkshire reserves the right to change specifications, design and materials of products listed in this publication without prior notice

HEAD OFFICE

Pegler Yorkshire Group Limited St. Catherine’s Avenue, Doncaster, South Yorkshire DN4 8DF, England

Tel: +44 (0) 844 243 4400 Fax: +44 (0) 844 243 9870 Email: [email protected]

www.pegleryorkshire.co.uk LIT.REF: WEB ONLY

Price List Covers.indd 8 26/02/2014 12:2716972 PY_PRESTEX_PL_03.14_v3.indd 16 27/02/2014 12:45

PRICE LIST Prestex - Pegler Yorkshire · 2014. 3. 3. · Pegler Yorkshire Price list – 3rd March...

Documents

Transcript of PRICE LIST Prestex - Pegler Yorkshire · 2014. 3. 3. · Pegler Yorkshire Price list – 3rd March...