PRICE LIST LG 2013 - Podlahy, dveře, schody, obklady ... CLASSICA Technical information Wood...
Transcript of PRICE LIST LG 2013 - Podlahy, dveře, schody, obklady ... CLASSICA Technical information Wood...
Prices valid from April 2013
PRICE LIST2013
CZECH REPUBLIC
CONDITIONS OF SALE
Currency: EuroCarriage: ex works our factory in Miralduolo (PG) ItalyPacking: included in pricePayment: anticipated before shipmentClaims: Returned merchandise will only be accepted within 6 months of delivery date and following ourwritten authorization. All authorized returns must be forwarded carriage paid and in full standard packs inresaleable condition. Providing that returned goods are received back in perfect condition , a credit noteamounting to 70% of invoiced total will be raised.
Index
CLASSICATechnical informationWood SpeciesOakOak MichelangeloCanadian MapleCabreuva KM31DoussieIrokoTeakWengeMaple SycomorusCherrySteamed BeechJatobaMoradoAdditional wood workingAccessoriesCleaning and maintenance products
ATELIER Wood Species and CollectionsRéserveDocFahrenheitQuattrocento italianoAncienAntiqueAccessories Cleaning and maintenance products
NATURAL GENIUSWood Species and CollectionsMedocQuadroneVibrazioniSlideFoxtrotAccessories Cleaning and maintenance products
Ecological, environment and product qualityWood: a living material
Margaritelli S.p.A. reserves the right to alter the features or details of the above at any time and without notice.
2
EXTRA-WIDE BOARDS
HARDWOOD THICKNESS: 5 mm
SUPPORT THICKNESS: 9 mm
TOTAL THICKNESS: 14 mm
SUPPORT: birch wood
WEIGHT: 10 kg/m2 *THERMAL RESISTANCE: 0,081 m2 K / W *
HARDWOOD THICKNESS: 3,5 mm
SUPPORT THICKNESS: 9 mm
TOTAL THICKNESS: 12,5 mm
SUPPORT: birch wood
WEIGHT: 9 kg/m2 *THERMAL RESISTANCE: 0,072 m2 K / W *
HARDWOOD THICKNESS: 2,5 mm
SUPPORT THICKNESS : 7,5 mm
TOTAL THICKNESS: 10 mm
SUPPORT: birch wood
WEIGHT: 7,5 kg/m2 *THERMAL RESISTANCE: 0,056 m2 K / W *
* Approximate indications which refer to Oak.
All products of Classica section are suitable for glued down installation. They may be installed with underfloor heating and cooling system.
The features and specifications of the products stated in this document may be subject to alterations. 4
TRADITIONAL SIZES
HARDWOOD THICKNESS: 5 mm
SUPPORT THICKNESS : 9 mm
TOTAL THICKNESS: 14 mm
SUPPORT: birch wood
WEIGHT: 10 kg/m2 *THERMAL RESISTANCE: 0,081 m2 K / W *
HARDWOOD THICKNESS: 5 mm
SUPPORT THICKNESS : 9 mm
TOTAL THICKNESS: 14 mm
SUPPORT: birch wood
WEIGHT: 10 kg/m2 *THERMAL RESISTANCE: 0,081 m2 K / W *
HARDWOOD THICKNESS: 5 mm
SUPPORT THICKNESS: 6 mm
TOTAL THICKNESS: 11 mm
SUPPORT: birch wood
WEIGHT: 8 kg/m2 *THERMAL RESISTANCE: 0,065 m2 K / W *
HARDWOOD THICKNESS: 3,5 mm
SUPPORT THICKNESS: 7,5 mm
TOTAL THICKNESS: 11 mm
SUPPORT: birch wood
WEIGHT: 8 kg/m2 *THERMAL RESISTANCE: 0,062 m2 K / W *
HARDWOOD THICKNESS: 3,5 mm
SUPPORT THICKNESS: 6 mm
TOTAL THICKNESS: 9,5 mm
SUPPORT: birch wood
WEIGHT: 6,4 kg/m2 *THERMAL RESISTANCE: 0,054 m2 K / W *
5
FINISHES
XPLUS High-resistance solvents-free varnish, with a satin appearance.The finish features Crystalcare antibacterial technology.
NATURPLUS Solvents-free varnish, characterized by a natural finish aspect. It is applied after a brushingtreatment of the surface. The finish features Crystalcare antibacterial technology.
NATURPLUS2 Solvents-free varnish, characterized by a natural finish aspect. It is applied after a brushing treatment of the surface. The Naturplus2 version, compared to Naturplus, highlights a sculptural pore effect and a less glossy surface.The finish features Crystalcare antibacterial technology.
INVISIBLE TOUCH Water-based finish, has the characteristic of protecting the wood whilst maintaining the typical appearance and color of an untreated surface.The finish features Crystalcare antibacterial technology.
OLEONATURE Natural oils-based finish air-dried, applied to a brushed surface. It is characterized by high protection and easy maintenance, thanks to a special treatment as last coating application.
NATIF Natural oils-based finish air-dried. It is characterized by a highly natural, matt appearance and
the maintenance of a typical open-pore wood which requires periodic nourishment.
PRE-SANDED Presanded surface, ready to be finished on site after installation.
GRADES
Elite / Elegant Mixed grain, substantially homogeneous colour in relation to the characteristics of the species. In some woods possible presence of small knots.
Fibramix Mixed grain. Some boards may have variegated colour and knots. In the collection "extra-wide boards" filled and open knots may be included.
Dekora Mixed grain and variegations of colour. Possible presence of knots according to the characteristics of the wood species.
Country Mixed grain and variegations of colour. Large presence of knots including consolidated and open ones.
Wood is a natural and variegated material, therefore the descriptions above, as well as photos and samples displayed do not fully represent the full colours'range in a comprehensive way, the textures and peculiarities of each indidividual product. The above descriptions, photos and samples should therefore be considered as indicative.The features and specifications of the products stated in this document may be subject to alterations.
6
MAPLE SYCOMORUS
CANADIAN MAPLE DOUSSIE STEAMED BEECH
IROKO TEAK JATOBA
WENGECABREUVA KM31MORADO
CHERRY
9
OAK/ EXTRA-WIDE BOARDS
XPLUS NATURPLUS2 INVISIBLE TOUCH OLEONATURE NATIF PRE-SANDED
230 144,45 149,00 146,25 139,05lengths 126,15 130,70 128,00 120,80
total thickness 1500-2400 mm 111,00 115,55 112,80 105,6014 mm 190hardwood thickness lengths 107,90 112,45 109,70 102,505 mm 1500-2400 mm 94,90 99,50 96,75 89,55
140 111,55 116,10 113,35 106,15lengths 93,25 97,80 95,10 87,901200-2100 mm 82,10 86,65 83,90 76,70
190lengths 93,25 97,80 95,10 87,90
total thickness 1500-2400 mm 82,10 86,65 83,90 76,7012,5 mm 140hardwood thickness lengths 82,30 86,85 84,10 76,903,5 mm 1200-2100 mm 72,40 76,95 74,25 67,05
190lengths 82,30 86,85 84,10 76,90
total thickness 1500-2400 mm 72,40 76,95 74,25 67,05
10 mm 140hardwood thickness lengths 75,00 79,55 76,80 69,602,5 mm 1500-1800 mm 65,80 70,40 67,65 60,40
140 smartlengths 67,30 71,85 69,10 61,90800-1200 mm 63,25 67,85 65,10 57,90
Prices are €/m² VAT excluded
ELITE / ELEGANT FIBRAMIX COUNTRY
• The products in the "Extra-wide boards" collection, unless otherwise specified, • Some products in this pricelist are manufactured upon request.
are made with a small bevel on all four edges. Please check availability and delivery time with the sales department
• The products are supplied in random lengths according to availability. before placing the order.
In 190 mm width lengths between 1800 and 2100 mm are mainly available. • Listone and Plank are also available with sharp edges (without chamfer)
• The material supplied may incorporate up to 10% of shorter lenghts with an additional surcharge of 5,35 €/m2.
compared to the ones mentioned in the price list. Plank 190 and Plank 230 with sharp edges have a total thickness of 16 mm
• Orders of one fixed length will be individually evaluated. Once accepted a instead of 14 mm.
surcharge of 20% will be applied.
TECHNICAL ADDITIONAL CLEANING AND MAINTENANCE
INFORMATION page 4 WOOD WORKING page 31 ACCESSORIES page 32 PRODUCTS page 36
OAK FROM FONTAINES
10
OAK/ TRADITIONAL FORMATS
XPLUS NATURPLUS2 INVISIBLE TOUCH OLEONATURE NATIF PRE-SANDED
125 107,55total thickness 14 mm lengths 103,05 *hardwood thickness 800-1500 mm 94,655 mm
90 99,40total thickness 14 mm lengths
hardwood thickness 490-1200 mm 87,505 mm
70total thickness 11 mm lengths
hardwood thickness 350-800 mm
5 mm
90 79,55total thickness 11 mm lengths 73,15 * 77,70 75,00hardwood thickness 490-1000 mm 70,003,5 mm
70total thickness 9,5 mm lengths 62,15 62,15 * 67,30hardwood thickness 350-600 mm
3,5 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT FIBRAMIX DEKORA
• The products in the "Traditional formats" collection are made with sharp • Orders of one fixed length will be individually evaluated. Once accepted a
edges (without chamfer). surcharge of 20% will be applied.
• Material is supplied in random lengths subject to availability. • Some products in this pricelist are manufactured upon request.
Listone 90 may occasionally be supplied with length 1200 mm, Corona 70 Please check availability and delivery time with the sales department
with length 800 mm. before placing the order.
• The material supplied may incorporate up to 10% of shorter lenghts
compared to the ones mentioned in the price list. * Products supplied in Naturplus finish.
TECHNICAL ADDITIONAL CLEANING AND MAINTENANCE
INFORMATION page 4 WOOD WORKING page 31 ACCESSORIES page 32 PRODUCTS page 36
OAK FROM FONTAINES
11
OAK MICHELANGELO / EXTRA-WIDE BOARDS
XPLUS NATURPLUS2 INVISIBLE TOUCH OLEONATURE NATIF PRE-SANDED
230 151,75 156,30lengths 133,45 138,05
total thickness 1500-2400 mm 118,30 122,8514 mm 190hardwood thickness lengths 115,20 119,755 mm 1500-2400 mm 102,25 106,80
140 118,85 123,40lengths 100,55 105,151200-2100 mm 89,40 93,95
190lengths 100,55 105,15
total thickness 1500-2400 mm 89,40 93,9512,5 mm 140hardwood thickness lengths 89,60 94,153,5 mm 1200-2100 mm 79,70 84,30
190lengths 89,60 94,15
total thickness 1500-2400 mm 79,70 84,3010 mm 140hardwood thickness lengths 82,30 86,852,5 mm 1500-1800 mm 73,15 77,70
140 smartlengths 74,60 79,15800-1200 mm 70,55 75,15
Prices are €/m² VAT excluded
ELITE / ELEGANT FIBRAMIX COUNTRY
• The products in the "Extra-wide boards" collection, unless otherwise specified, Plank 190 and Plank 230 with sharp edges have a total thickness of 16 mm
are made with a small bevel on all four edges. instead of 14 mm.
• The products are supplied in random lengths according to availability. • All the products of the Michelangelo collection are manufactured upon request.
In 190 mm width lengths between 1800 and 2100 mm are mainly available. The minimum order quantity is 35 m2. A 40% deposit is required for all orders.
• The material supplied may incorporate up to 10% of shorter lenghts Please check availability and delivery time with the sales department
compared to the ones mentioned in the price list. before placing the order.
• Orders of one fixed length will be individually evaluated. Once accepted a
surcharge of 20% will be applied.
• Listone and Plank are also available with sharp edges (without chamfer)
with an additional surcharge of 5,35 €/m2.
TECHNICAL ADDITIONAL CLEANING AND MAINTENANCE
INFORMATION page 4 WOOD WORKING page 31 ACCESSORIES page 32 PRODUCTS page 36
EICHE AUS FONTAINES
12
OAK MICHELANGELO / TRADITIONAL FORMATS
XPLUS NATURPLUS2 INVISIBLE TOUCH OLEONATURE NATIF PRE-SANDED
125total thickness 14 mm lengths
hardwood thickness 800-1500 mm
5 mm
90total thickness 14 mm lengths
hardwood thickness 490-1200 mm
5 mm
70total thickness 11 mm lengths
hardwood thickness 350-800 mm
5 mm
90total thickness 11 mm lengths 84,10 *hardwood thickness 490-1000 mm
3,5 mm
70total thickness 9,5 mm lengths
hardwood thickness 350-600 mm
3,5 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT FIBRAMIX DEKORA
• The products in the "Traditional formats" collection are made with sharp • All the products of the Michelangelo collection are manufactured upon request.
edges (without chamfer). The minimum order quantity is 35 m2. A 40% deposit is required for all orders.
• Material is supplied in random lengths subject to availability. Please check availability and delivery time with the sales department
Listone 90 may occasionally be supplied with length 1200 mm, Corona 70 before placing the order.
with length 800 mm.
• The material supplied may incorporate up to 10% of shorter lenghts
compared to the ones mentioned in the price list. * Product supplied in Naturplus finish. Only available for
• Orders of one fixed length will be individually evaluated. Once accepted a Montblanc and Biancospino colours.
surcharge of 20% will be applied.
TECHNICAL ADDITIONAL CLEANING AND MAINTENANCE
INFORMATION page 4 WOOD WORKING page 31 ACCESSORIES page 32 PRODUCTS page 36
EICHE AUS FONTAINES
13
CANADIAN MAPLE / EXTRA-WIDE BOARDS
XPLUS NATURPLUS2 INVISIBLE TOUCH OLEONATURE NATIF PRE-SANDED
230lengths
total thickness 1500-2400 mm
14 / 16 mm * 190 184,70 **hardwood thickness lengths
5 mm 1500-2400 mm
140 157,45 **lengths
1200-2100 mm
190lengths
total thickness 1500-2400 mm
12,5 mm 140hardwood thickness lengths
3,5 mm 1200-2100 mm
190lengths
total thickness 1500-2400 mm
10 mm 140hardwood thickness lengths
2,5 mm 1500-1800 mm
140 smartlengths
800-1200 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT FIBRAMIX COUNTRY
• The products in the "Extra-wide boards" collection, unless otherwise specified, Please check availability and delivery time with the sales department
are made with a small bevel on all four edges. before placing the order.
• The products are supplied in random lengths according to availability.
In 190 mm width lengths between 1800 and 2100 mm are mainly available. * The product Plank 140 has a total thickness of 14 mm, Plank 190
• The material supplied may incorporate up to 10% of shorter lenghts a total thickness of 16 mm.
compared to the ones mentioned in the price list.
• Orders of one fixed length will be individually evaluated. Once accepted a ** These products are only supplied with sharp edges (without
surcharge of 20% will be applied. chamfer). For this product the application of Sigilplus is compulsory
• Some products in this pricelist are manufactured upon request. (s. "Cleaning and maintenance products").
TECHNICAL ADDITIONAL CLEANING AND MAINTENANCE
INFORMATION page 4 WOOD WORKING page 31 ACCESSORIES page 32 PRODUCTS page 36
EICHE AUS FONTAINES EICHE AUS FONTAINES CANADIAN MAPLE
14
CANADIAN MAPLE / TRADITIONAL FORMATS
XPLUS NATURPLUS2 INVISIBLE TOUCH OLEONATURE NATIF PRE-SANDED
125total thickness 14 mm lengths
hardwood thickness 800-1500 mm
5 mm
90total thickness 14 mm lengths
hardwood thickness 490-1200 mm
5 mm
70 104,25 *total thickness 11 mm lengths
hardwood thickness 350-800 mm 93,85 *5 mm
90total thickness 11 mm lengths 111,90 *hardwood thickness 490-1000 mm
3,5 mm
70total thickness 9,5 mm lengths 93,85 *hardwood thickness 350-600 mm
3,5 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT FIBRAMIX DEKORA
• The products in the "Traditional formats" collection are made with sharp • Orders of one fixed length will be individually evaluated. Once accepted a
edges (without chamfer). surcharge of 20% will be applied.
• Material is supplied in random lengths subject to availability. • Some products in this pricelist are manufactured upon request.
Listone 90 may occasionally be supplied with length 1200 mm, Corona 70 Please check availability and delivery time with the sales department
with length 800 mm. before placing the order.
• The material supplied may incorporate up to 10% of shorter lenghts * For this product the application of Sigilplus is compulsory
compared to the ones mentioned in the price list. (s. "Cleaning and maintenance products").
TECHNICAL ADDITIONAL CLEANING AND MAINTENANCE
INFORMATION page 4 WOOD WORKING page 31 ACCESSORIES page 32 PRODUCTS page 36
EICHE AUS FONTAINES CANADIAN MAPLE
15
CABREUVA KM31/ EXTRA-WIDE BOARDS
XPLUS NATURPLUS2 INVISIBLE TOUCH OLEONATURE NATIF PRE-SANDED
230lengths
total thickness 1500-2400 mm
14 / 16 mm * 190hardwood thickness lengths 214,90 ***5 mm 1500-2400 mm
140lengths 192,85 ** 194,701200-2100 mm
190lengths
total thickness 1500-2400 mm
12,5 mm 140hardwood thickness lengths
3,5 mm 1200-2100 mm
190lengths
total thickness 1500-2400 mm
10 mm 140hardwood thickness lengths
2,5 mm 1500-1800 mm
140 smartlengths
800-1200 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT FIBRAMIX COUNTRY
• The products in the "Extra-wide boards" collection, unless otherwise specified, Please check availability and delivery time with the sales department
are made with a small bevel on all four edges. before placing the order.
• The products are supplied in random lengths according to availability.
In 190 mm width lengths between 1800 and 2100 mm are mainly available. * The product Plank 140 has a total thickness of 14 mm, Plank 190
• The material supplied may incorporate up to 10% of shorter lenghts a total thickness of 16 mm.
compared to the ones mentioned in the price list. ** These products are only supplied with sharp edges (without
• Orders of one fixed length will be individually evaluated. Once accepted a chamfer).
surcharge of 20% will be applied. *** Occasionally available.
• Some products in this pricelist are manufactured upon request.
TECHNICAL ADDITIONAL CLEANING AND MAINTENANCE
INFORMATION page 4 WOOD WORKING page 31 ACCESSORIES page 32 PRODUCTS page 36
EICHE AUS FONTAINES EICHE AUS FONTAINES AHORN KANADISCH
16
CABREUVA KM31 / TRADITIONAL FORMATS
XPLUS NATURPLUS2 INVISIBLE TOUCH OLEONATURE NATIF PRE-SANDED
125total thickness 14 mm lengths
hardwood thickness 800-1500 mm
5 mm
90total thickness 14 mm lengths
hardwood thickness 490-1200 mm
5 mm
70total thickness 11 mm lengths
hardwood thickness 350-800 mm
5 mm
90total thickness 11 mm lengths 123,95 125,75hardwood thickness 490-1000 mm
3,5 mm
70total thickness 9,5 mm lengths
hardwood thickness 350-600 mm
3,5 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT FIBRAMIX DEKORA
• The products in the "Traditional formats" collection are made with sharp • Orders of one fixed length will be individually evaluated. Once accepted a
edges (without chamfer). surcharge of 20% will be applied.
• Material is supplied in random lengths subject to availability. • Some products in this pricelist are manufactured upon request.
Listone 90 may occasionally be supplied with length 1200 mm. Please check availability and delivery time with the sales department
• The material supplied may incorporate up to 10% of shorter lenghts before placing the order.
compared to the ones mentioned in the price list.
TECHNICAL ADDITIONAL CLEANING AND MAINTENANCE
INFORMATION page 4 WOOD WORKING page 31 ACCESSORIES page 32 PRODUCTS page 36
EICHE AUS FONTAINES AHORN KANADISCH
17
DOUSSIE / EXTRA-WIDE BOARDS
XPLUS NATURPLUS2 INVISIBLE TOUCH OLEONATURE NATIF PRE-SANDED
230lengths
total thickness 1500-2400 mm
14 / 16 mm * 190 165,40 **hardwood thickness lengths
5 mm 1500-2400 mm
140 148,75 **lengths
1200-2100 mm
190lengths
total thickness 1500-2400 mm
12,5 mm 140hardwood thickness lengths
3,5 mm 1200-2100 mm
190lengths
total thickness 1500-2400 mm
10 mm 140hardwood thickness lengths
2,5 mm 1500-1800 mm
140 smartlengths
800-1200 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT FIBRAMIX COUNTRY
• The products in the "Extra-wide boards" collection, unless otherwise specified, • Some products in this pricelist are manufactured upon request.
are made with a small bevel on all four edges. Please check availability and delivery time with the sales department
• The products are supplied in random lengths according to availability. before placing the order.
In 190 mm width lengths between 1800 and 2100 mm are mainly available.
• The material supplied may incorporate up to 10% of shorter lenghts * The product Plank 140 has a total thickness of 14 mm, Plank 190
compared to the ones mentioned in the price list. a total thickness of 16 mm.
• Orders of one fixed length will be individually evaluated. Once accepted a ** Products supplied in Naturplus finish and sharp edges
surcharge of 20% will be applied. (without chamfer).
TECHNICAL ADDITIONAL CLEANING AND MAINTENANCE
INFORMATION page 4 WOOD WORKING page 31 ACCESSORIES page 32 PRODUCTS page 36
EICHE AUS FONTAINES EICHE AUS FONTAINES AHORN KANADISCH
18
DOUSSIE / TRADITIONAL FORMATS
XPLUS NATURPLUS2 INVISIBLE TOUCH OLEONATURE NATIF PRE-SANDED
125 127,15total thickness 14 mm lengths
hardwood thickness 800-1500 mm 111,905 mm
90total thickness 14 mm lengths
hardwood thickness 490-1200 mm
5 mm
70 81,90total thickness 11 mm lengths
hardwood thickness 350-800 mm 73,755 mm
90total thickness 11 mm lengths 101,65 101,65 * 103,45hardwood thickness 490-1000 mm
3,5 mm
70total thickness 9,5 mm lengths 73,75 73,75 * 78,85hardwood thickness 350-600 mm
3,5 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT FIBRAMIX DEKORA
• The products in the "Traditional formats" collection are made with sharp • Orders of one fixed length will be individually evaluated. Once accepted a
edges (without chamfer). surcharge of 20% will be applied.
• Material is supplied in random lengths subject to availability. • Some products in this pricelist are manufactured upon request.
Listone 90 may occasionally be supplied with length 1200 mm, Corona 70 Please check availability and delivery time with the sales department
with length 800 mm. before placing the order.
• The material supplied may incorporate up to 10% of shorter lenghts
compared to the ones mentioned in the price list. * Products supplied in Naturplus finish.
TECHNICAL ADDITIONAL CLEANING AND MAINTENANCE
INFORMATION page 4 WOOD WORKING page 31 ACCESSORIES page 32 PRODUCTS page 36
EICHE AUS FONTAINES AHORN KANADISCH
19
IROKO / EXTRA-WIDE BOARDS
XPLUS NATURPLUS2 INVISIBLE TOUCH OLEONATURE NATIF PRE-SANDED
230lengths
total thickness 1500-2400 mm
14 / 16 mm * 190hardwood thickness lengths
5 mm 1500-2400 mm
140 142,75 **lengths
1200-2100 mm
190lengths
total thickness 1500-2400 mm
12,5 mm 140hardwood thickness lengths
3,5 mm 1200-2100 mm
190lengths
total thickness 1500-2400 mm
10 mm 140hardwood thickness lengths
2,5 mm 1500-1800 mm
140 smartlengths
800-1200 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT FIBRAMIX COUNTRY
• The products in the "Extra-wide boards" collection, unless otherwise specified, • Some products in this pricelist are manufactured upon request.
are made with a small bevel on all four edges. Please check availability and delivery time with the sales department
• The products are supplied in random lengths according to availability. before placing the order.
In 190 mm width lengths between 1800 and 2100 mm are mainly available.
• The material supplied may incorporate up to 10% of shorter lenghts * The product Plank 140 has a total thickness of 14 mm, Plank 190
compared to the ones mentioned in the price list. a total thickness of 16 mm.
• Orders of one fixed length will be individually evaluated. Once accepted a ** Products supplied in Naturplus finish and sharp edges
surcharge of 20% will be applied. (without chamfer).
TECHNICAL ADDITIONAL CLEANING AND MAINTENANCE
INFORMATION page 4 WOOD WORKING page 31 ACCESSORIES page 32 PRODUCTS page 36
EICHE AUS FONTAINES EICHE AUS FONTAINES AHORN KANADISCHEICHE AUS FONTAINES EICHE AUS FONTAINES AHORN KANADISCH
20
IROKO / TRADITIONAL FORMATS
XPLUS NATURPLUS2 INVISIBLE TOUCH OLEONATURE NATIF PRE-SANDED
125 114,50total thickness 14 mm lengths
hardwood thickness 800-1500 mm 100,805 mm
90total thickness 14 mm lengths
hardwood thickness 490-1200 mm
5 mm
70total thickness 11 mm lengths
hardwood thickness 350-800 mm
5 mm
90total thickness 11 mm lengths 100,55hardwood thickness 490-1000 mm
3,5 mm
70total thickness 9,5 mm lengths 70,15 70,15 *hardwood thickness 350-600 mm
3,5 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT FIBRAMIX DEKORA
• The products in the "Traditional formats" collection are made with sharp • Orders of one fixed length will be individually evaluated. Once accepted a
edges (without chamfer). surcharge of 20% will be applied.
• Material is supplied in random lengths subject to availability. • Some products in this pricelist are manufactured upon request.
Listone 90 may occasionally be supplied with length 1200 mm, Corona 70 Please check availability and delivery time with the sales department
with length 800 mm. before placing the order.
• The material supplied may incorporate up to 10% of shorter lenghts
compared to the ones mentioned in the price list. * Products supplied in Naturplus finish.
TECHNICAL ADDITIONAL CLEANING AND MAINTENANCE
INFORMATION page 4 WOOD WORKING page 31 ACCESSORIES page 32 PRODUCTS page 36
EICHE AUS FONTAINES AHORN KANADISCH
21
TEAK / EXTRA-WIDE BOARDS
XPLUS NATURPLUS2 INVISIBLE TOUCH OLEONATURE NATIF PRE-SANDED
230 236,95 ** 238,75lengths
total thickness 1500-2400 mm
14 / 16 mm * 190 219,40 **hardwood thickness lengths
5 mm 1500-2400 mm
140 204,80 **lengths
1200-2100 mm
190lengths
total thickness 1500-2400 mm
12,5 mm 140hardwood thickness lengths
3,5 mm 1200-2100 mm
190lengths
total thickness 1500-2400 mm
10 mm 140hardwood thickness lengths
2,5 mm 1500-1800 mm
140 smartlengths
800-1200 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT FIBRAMIX COUNTRY
• The products in the "Extra-wide boards" collection, unless otherwise specified, • Some products in this pricelist are manufactured upon request.
are made with a small bevel on all four edges. Please check availability and delivery time with the sales department
• The products are supplied in random lengths according to availability. before placing the order.
In 190 mm width lengths between 1800 and 2100 mm are mainly available.
• The material supplied may incorporate up to 10% of shorter lenghts * The product Plank 140 has a total thickness of 14 mm, Plank 190
compared to the ones mentioned in the price list. a total thickness of 16 mm.
• Orders of one fixed length will be individually evaluated. Once accepted a ** Products supplied in Naturplus finish and sharp edges
surcharge of 20% will be applied. (without chamfer).
TECHNICAL ADDITIONAL CLEANING AND MAINTENANCE
INFORMATION page 4 WOOD WORKING page 31 ACCESSORIES page 32 PRODUCTS page 36
EICHE AUS FONTAINES EICHE AUS FONTAINES AHORN KANADISCHEICHE AUS FONTAINES EICHE AUS FONTAINES AHORN KANADISCHTEAK
22
TEAK / TRADITIONAL FORMATS
XPLUS NATURPLUS2 INVISIBLE TOUCH OLEONATURE NATIF PRE-SANDED
125total thickness 14 mm lengths 181,20 * 183,00hardwood thickness 800-1500 mm
5 mm
90total thickness 14 mm lengths
hardwood thickness 490-1200 mm
5 mm
70total thickness 11 mm lengths
hardwood thickness 350-800 mm
5 mm
90total thickness 11 mm lengths 123,30 123,30 * 125,15hardwood thickness 490-1000 mm
3,5 mm
70total thickness 9,5 mm lengths
hardwood thickness 350-600 mm
3,5 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT FIBRAMIX DEKORA
• The products in the "Traditional formats" collection are made with sharp • Orders of one fixed length will be individually evaluated. Once accepted a
edges (without chamfer). surcharge of 20% will be applied.
• Material is supplied in random lengths subject to availability. • Some products in this pricelist are manufactured upon request.
Listone 90 may occasionally be supplied with length 1200 mm. Please check availability and delivery time with the sales department
• The material supplied may incorporate up to 10% of shorter lenghts before placing the order.
compared to the ones mentioned in the price list. * Products supplied in Naturplus finish.
TECHNICAL ADDITIONAL CLEANING AND MAINTENANCE
INFORMATION page 4 WOOD WORKING page 31 ACCESSORIES page 32 PRODUCTS page 36
EICHE AUS FONTAINES AHORN KANADISCHTEAK
23
WENGE / EXTRA-WIDE BOARDS
XPLUS INVISIBLE TOUCH OLEONATURE NATIF PRE-SANDED
230lengths
total thickness 1500-2400 mm
14 / 16 mm * 190
**hardwood thickness lengths ***5 mm 1500-2400 mm
140lengths 194,751200-2100 mm
190lengths
total thickness 1500-2400 mm
12,5 mm 140hardwood thickness lengths
3,5 mm 1200-2100 mm
190lengths
total thickness 1500-2400 mm
10 mm 140hardwood thickness lengths
2,5 mm 1500-1800 mm
140 smartlengths
800-1200 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT FIBRAMIX COUNTRY
• The products in the "Extra-wide boards" collection, unless otherwise specified, • Some products in this pricelist are manufactured upon request.
are made with a small bevel on all four edges. Please check availability and delivery time with the sales department
• The products are supplied in random lengths according to availability. before placing the order.
In 190 mm width lengths between 1800 and 2100 mm are mainly available. * The product Plank 140 has a total thickness of 14 mm, Plank 190
• The material supplied may incorporate up to 10% of shorter lenghts a total thickness of 16 mm.
compared to the ones mentioned in the price list. ** Products supplied in Naturplus finish and sharp edges
• Orders of one fixed length will be individually evaluated. Once accepted a (without chamfer).
surcharge of 20% will be applied. *** Product supplied in 180 mm width.
TECHNICAL ADDITIONAL CLEANING AND MAINTENANCE
INFORMATION page 4 WOOD WORKING page 31 ACCESSORIES page 32 PRODUCTS page 36
204,45 ***
192,90 **
NATURPLUS2
212,75 **
202,60
EICHE AUS FONTAINES EICHE AUS FONTAINES AHORN KANADISCHAHORN KANADISCH
24
WENGE / TRADITIONAL FORMATS
XPLUS NATURPLUS2 INVISIBLE TOUCH OLEONATURE NATIF PRE-SANDED
125total thickness 14 mm lengths
hardwood thickness 800-1500 mm
5 mm
90total thickness 14 mm lengths
hardwood thickness 490-1200 mm
5 mm
70total thickness 11 mm lengths
hardwood thickness 350-800 mm
5 mm
90total thickness 11 mm lengths 114,40 * 116,20hardwood thickness 490-1000 mm
3,5 mm
70total thickness 9,5 mm lengths 93,85 * 98,95hardwood thickness 350-600 mm
3,5 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT FIBRAMIX DEKORA
• The products in the "Traditional formats" collection are made with sharp • Orders of one fixed length will be individually evaluated. Once accepted a
edges (without chamfer). surcharge of 20% will be applied.
• Material is supplied in random lengths subject to availability. • Some products in this pricelist are manufactured upon request.
Listone 90 may occasionally be supplied with length 1200 mm, Corona 70 Please check availability and delivery time with the sales department
with length 800 mm. before placing the order.
• The material supplied may incorporate up to 10% of shorter lenghts
compared to the ones mentioned in the price list. * Products supplied in Naturplus finish.
TECHNICAL ADDITIONAL CLEANING AND MAINTENANCE
INFORMATION page 4 WOOD WORKING page 31 ACCESSORIES page 32 PRODUCTS page 36
EICHE AUS FONTAINES AHORN KANADISCH
25
MAPLE SYCOMORUS / TRADITIONAL FORMATS
XPLUS NATURPLUS2 INVISIBLE TOUCH OLEONATURE NATIF PRE-SANDED
125total thickness 14 mm lengths 114,45 *hardwood thickness 800-1500 mm
5 mm
90total thickness 14 mm lengths
hardwood thickness 490-1200 mm 87,50 *5 mm
70 81,90 *total thickness 11 mm lengths
hardwood thickness 350-800 mm 73,75 *5 mm
90total thickness 11 mm lengths
hardwood thickness 490-1000 mm
3,5 mm
70total thickness 9,5 mm lengths
hardwood thickness 350-600 mm
3,5 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT FIBRAMIX DEKORA
• The products in the "Traditional formats" collection are made with sharp • Some products in this pricelist are manufactured upon request.
edges (without chamfer). Please check availability and delivery time with the sales department
• Material is supplied in random lengths subject to availability. before placing the order.
Listone 90 may occasionally be supplied with length 1200 mm, Corona 70
with length 800 mm. * The application of Sigilplus is compulsory for these products.
• The material supplied may incorporate up to 10% of shorter lenghts (please s. "Cleaning and maintenance products" page).
compared to the ones mentioned in the price list.
• Orders of one fixed length will be individually evaluated. Once accepted a
surcharge of 20% will be applied.
TECHNICAL ADDITIONAL CLEANING AND MAINTENANCE
INFORMATION page 4 WOOD WORKING page 31 ACCESSORIES page 32 PRODUCTS page 36
EICHE AUS FONTAINES AHORN KANADISCH
MAPLE SYCOMORUS FROM FONTAINES
26
CHERRY / TRADITIONAL FORMATS
XPLUS NATURPLUS2 INVISIBLE TOUCH OLEONATURE NATIF PRE-SANDED
125total thickness 14 mm lengths
hardwood thickness 800-1500 mm
5 mm
90total thickness 14 mm lengths
hardwood thickness 490-1200 mm
5 mm
70total thickness 11 mm lengths
hardwood thickness 350-800 mm
5 mm
90total thickness 11 mm lengths 115,70 * 117,55hardwood thickness 490-1000 mm
3,5 mm
70total thickness 9,5 mm lengths
hardwood thickness 350-600 mm
3,5 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT FIBRAMIX DEKORA
• The products in the "Traditional formats" collection are made with sharp surcharge of 20% will be applied.
edges (without chamfer). • Some products in this pricelist are manufactured upon request.
• Material is supplied in random lengths subject to availability. Please check availability and delivery time with the sales department
Listone 90 may occasionally be supplied with length 1200 mm. before placing the order.
• The material supplied may incorporate up to 10% of shorter lenghts
compared to the ones mentioned in the price list. * The application of Sigilplus is compulsory for these products.
• Orders of one fixed length will be individually evaluated. Once accepted a (please s. "Cleaning and maintenance products" page).
TECHNICAL ADDITIONAL CLEANING AND MAINTENANCE
INFORMATION page 4 WOOD WORKING page 31 ACCESSORIES page 32 PRODUCTS page 36
EICHE AUS FONTAINES AHORN KANADISCH
AHORN SYCOMORUS AUS FONTAINES CHERRY FROM FONTAINES
27
STEAMED BEECH / TRADITIONAL FORMATS
XPLUS NATURPLUS2 INVISIBLE TOUCH OLEONATURE NATIF PRE-SANDED
125 107,55 *total thickness 14 mm lengths
hardwood thickness 800-1500 mm 94,65 *5 mm
90 99,40 *total thickness 14 mm lengths
hardwood thickness 490-1200 mm 87,50 *5 mm
70total thickness 11 mm lengths
hardwood thickness 350-800 mm
5 mm
90total thickness 11 mm lengths
hardwood thickness 490-1000 mm
3,5 mm
70total thickness 9,5 mm lengths 62,15 *hardwood thickness 350-600 mm
3,5 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT FIBRAMIX DEKORA
• The products in the "Traditional formats" collection are made with sharp surcharge of 20% will be applied.
edges (without chamfer). • Some products in this pricelist are manufactured upon request.
• Material is supplied in random lengths subject to availability. Please check availability and delivery time with the sales department
Corona 70 may occasionally be supplied with length 800 mm. before placing the order.
• The material supplied may incorporate up to 10% of shorter lenghts
compared to the ones mentioned in the price list. * The application of Sigilplus is compulsory for these products.
• Orders of one fixed length will be individually evaluated. Once accepted a (please s. "Cleaning and maintenance products" page).
TECHNICAL ADDITIONAL CLEANING AND MAINTENANCE
INFORMATION page 4 WOOD WORKING page 31 ACCESSORIES page 32 PRODUCTS page 36
EICHE AUS FONTAINES AHORN KANADISCH
AHORN SYCOMORUS AUS FONTAINES BUCHE GEDÄMPFT AUS FONTAINESSTEAMED BEECH FROM FONTAINES
28
JATOBA / TRADITIONAL FORMATS
XPLUS NATURPLUS2 INVISIBLE TOUCH OLEONATURE NATIF PRE-SANDED
125total thickness 14 mm lengths
hardwood thickness 800-1500 mm
5 mm
90total thickness 14 mm lengths
hardwood thickness 490-1200 mm
5 mm
70total thickness 11 mm lengths
hardwood thickness 350-800 mm
5 mm
90total thickness 11 mm lengths 109,70 111,55hardwood thickness 490-1000 mm
3,5 mm
70total thickness 9,5 mm lengths 73,75 78,85hardwood thickness 350-600 mm
3,5 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT FIBRAMIX DEKORA
• The products in the "Traditional formats" collection are made with sharp • Orders of one fixed length will be individually evaluated. Once accepted a
edges (without chamfer). surcharge of 20% will be applied.
• Material is supplied in random lengths subject to availability. • Some products in this pricelist are manufactured upon request.
Listone 90 may occasionally be supplied with length 1200 mm, Corona 70 Please check availability and delivery time with the sales department
with length 800 mm. before placing the order.
• The material supplied may incorporate up to 10% of shorter lenghts
compared to the ones mentioned in the price list.
TECHNICAL ADDITIONAL CLEANING AND MAINTENANCE
INFORMATION page 4 WOOD WORKING page 31 ACCESSORIES page 32 PRODUCTS page 36
EICHE AUS FONTAINES AHORN KANADISCH
AHORN SYCOMORUS AUS FONTAINES BUCHE GEDÄMPFT AUS FONTAINESJATOBAJATOBA
29
MORADO / TRADITIONAL FORMATS
XPLUS NATURPLUS2 INVISIBLE TOUCH OLEONATURE NATIF PRE-SANDED
125total thickness 14 mm lengths
hardwood thickness 800-1500 mm
5 mm
90total thickness 14 mm lengths
hardwood thickness 490-1200 mm
5 mm
70total thickness 11 mm lengths
hardwood thickness 350-800 mm
5 mm
90total thickness 11 mm lengths
hardwood thickness 490-1000 mm
3,5 mm
70total thickness 9,5 mm lengths 93,85hardwood thickness 350-600 mm
3,5 mm
Prices are €/m² VAT excluded
ELITE / ELEGANT FIBRAMIX DEKORA
• The products in the "Traditional formats" collection are made with sharp • Orders of one fixed length will be individually evaluated. Once accepted a
edges (without chamfer). surcharge of 20% will be applied.
• Material is supplied in random lengths subject to availability. • Some products in this pricelist are manufactured upon request.
Listone 90 may occasionally be supplied with length 1200 mm, Corona 70 Please check availability and delivery time with the sales department
with length 800 mm. before placing the order.
• The material supplied may incorporate up to 10% of shorter lenghts
compared to the ones mentioned in the price list.
TECHNICAL ADDITIONAL CLEANING AND MAINTENANCE
INFORMATION page 4 WOOD WORKING page 31 ACCESSORIES page 32 PRODUCTS page 36
EICHE AUS FONTAINES AHORN KANADISCH
AHORN SYCOMORUS AUS FONTAINES BUCHE GEDÄMPFT AUS FONTAINESJATOBAJATOBAMORADO
30
Prices are €/m2 VAT excluded
SUPPLY FOR ANCIENNE INSTALLATION additional surcharge 5,35 €/m2Production for Ancienne installation with widths 83, 140 and 190 mm (respectively 15%, 50%
and 35% of the whole surface). Available for Oak Plank and Listone for a minimum order quantity of 50 m2. The price is an additional surcharge on the price for the product with fix width 190 mm.
PRODUCTION FOR HERRINGBONE INSTALLATION additional surcharge 12,50 €/m2Production possible on all wood floors according to availability of the raw material.
Requests for specific lengths which are not standard lengths will be individually evaluated.Once accepted a price surcharge will be applied.The price is an additional surcharge on the price for regular installation product.
PRODUCTION FOR HUNGARIAN POINT quotation upon requestProduction possible on all wood floors in Oleonature finish.
The price is an additional surcharge on the price for regular installation product.
PRODUCTION FOR VIBRAZIONI INSTALLATION quotation upon requestProduction with sharp edges possible for Listone 90 and Listone 125 with all finishes
indicated in this price list.Production with small chamfer possible for all products of the collection "extra-wide boards"with Oleonature finish.Before placing the order, please check with the sales department for availability of raw material.The price is an additional surcharge on the price for regular installation product.
GRIFFE' additional surcharge 5,35 €/m2The appearance of the surface is characteristic of a rough-sawn wood floor.
Griffé surface treatment is possible on all products of the collection "extra-wide boards"with Oleonature finish. The minimum order quantity is 50 m2.
31
STAIR NOSINGS ( TYPE A)
ITEM A B C PRODUCTS
LENGTH WIDTH
1200 mm 190 mm * 40 mm Plank 230 / 190 / 140 144,001200 mm 190 mm 40 mm Listone 190 / 140 144,001200 mm 190 mm 40 mm Prima 190 / 140 / 140 smart 144,001200 mm 125 mm 40 mm Listone 125 110,651200 mm 90 mm 40 mm Maxi 90 72,001200 mm 70 mm 40 mm Original 70 72,001200 mm 90 mm 40 mm Listone 90 72,001200 mm 70 mm 40 mm Corona 70 72,00
Prices are €/pc VAT excluded
STAIR NOSING ( TYPE B)
ITEM A B C PRODUCTS
LENGTH WIDTH
1200 mm 190 mm * 190 mm * Plank 230 / 190 / 140 169,901200 mm 190 mm 190 mm Listone 190 /140 169,901200 mm 190 mm 190 mm Prima 190 / 140 / 140 smart 169,901200 mm 125 mm 125 mm Listone 125 130,601200 mm 90 mm 90 mm Maxi 90 85,001200 mm 70 mm 70 mm Original 70 85,001200 mm 90 mm 90 mm Listone 90 85,001200 mm 70 mm 70 mm Corona 70 85,00
Prices are €/pc VAT excluded
• Please specify the wood species and the finish when placing the stair • The standard elements are not designed to be fitted side by side.nosings order. In case of Plank stair nosings please also indicate the Requests of fitting together more stair nosings may be considered oncethickness of the product (14 or 16 mm). the order is send in and may have an additional surcharge.• These products are available upon request. The delivery time for standard • The handcrafted production of stair nosings may show characteristic elements is about 30 days from receipt of the order confirmation. tolerances due to the hand-made process.For products with sizes, shapes and colours other than the standard elements,
availability and delivery terms will be communicated each individual time. * Cabreuva and Iroko stair nosings are supplied in 140 mm width.
FRONTAL HEIGHT
FRONTAL HEIGHT
32
ADHESIVE
ITEM PRODUCT
ECOLFIT (Silane eco-friendly one component adhesive) 5,75
Tin 14 kg Prices are €/kg VAT excluded
REDUCERS
ITEM PRODUCTS
A B
LENGTH WIDTH
1200 mm 30 mm Plank 230 / 190 / 140 63,70Listone 190 / 140 / 125 63,70Prima 190 / 140 / 140 SMART 63,70Maxi 90 50,75Original 70 50,75Listone 90 50,75Corona 70 50,75
Prices are €/pc VAT excluded
• When placing the order of the stair nosings, please specify the wood species • The handcrafted production of reducers may show characteristic and the finish. In case of Plank stair nosings please also indicate the thickness tolerances due to the hand-made process.of the product (14 or 16 mm).• These products are available upon request. The delivery time for standard elements is about 30 days from receipt of the order confirmation.For products with sizes, shapes and colours other than the standard elements, availability and delivery terms will be communicated each individual time.
33
SKIRTING BOARDS 60x16 (veneer)
ITEM PRODUCTS
VARNISHED NATURAL
Dimensions BRUSHED OIL
HEIGHT: 60 mm OAK 4,35THICKNESS: 16 mm OAK MONTBLANC, BIANCOSPINO, CARVI, TAMARINDO 9,45LENGTH: 2,40 m OAK LINO, CASHMERE, CRETA 11,90
CHERRY 7,40CABREUVA KM31 8,70DOUSSIE 4,40 7,15IROKO 4,20JATOBA 7,40MORADO 9,15TEAK 4,60 7,45WENGE 5,60 8,45
packages of 12 lin.m. or 24 lin.m. Prices are €/lin.m. VAT excluded
SKIRTING BOARDS 50x10 (veneer)
ITEM PRODUCTS
VARNISHED
Dimensions BRUSHED
HEIGHT: 50 mm OAK 4,35THICKNESS: 10 mm OAK MONTBLANC, BIANCOSPINO, CARVI, TAMARINDO 9,45LENGTH: 2,40 m OAK LINO, CASHMERE, CRETA 11,90
WHITE LACQUERED 3,60SATIN ALUMINIUM 7,95
packages of 19,20 lin.m. Prices are €/lin.m. VAT excluded
• Skirting boards with Michelangelo colours are available upon request. • We recommend 50x15 mm skirting boards for Oak wood flooring with The delivery time is about 30 days from receipt of the order confirmation. Oleonature and Invisible Touch finish. • The wood veneer coating the skirting board (veneered versions) • The coating of white lacquered skirting board is made of monolayer may present differences in grain and colour compared to the corresponding laminate.wood floor material.
34
SKIRTING BOARDS 82x13 (veneer)
ITEM PRODUCTS
VARNISHED
Dimensions SMOOTH
HEIGHT: 82 mm OAK 4,05THICKNESS: 13 mm EUROPEAN MAPLE 4,05LENGTH: 2,40 m EUROPEAN CHERRY 4,70
STEAMED BEECH 4,00CANADIAN MAPLE 4,60CABREUVA KM31 5,85DOUSSIE 4,20IROKO 4,05JATOBA 4,40MORADO 6,50TEAK 4,45
packages of 12 lin.m. or 24 lin.m. Prices are €/lin.m. VAT excluded
SKIRTING BOARDS DECOR (solid wood)
ITEM PRODUCT
Dimensions
HEIGHT: 120 mm WHITE LACQUERED 16,45THICKNESS: 14 mm
LENGTH: 2,45 m
packages of 14,7 lin.m. Prices are €/lin.m. VAT excluded
• The wood veneer coating the skirting board (veneered versions) • The coating of white lacquered skirting board is made of monolayer may present differences in grain and colour compared to the corresponding laminate.wood floor material.• The length of Decor skirting board may slightly differ from indications here above. 35
CLEANING AND MAINTENANCE PRODUCTS / COMPATIBILITY CHART
FINISH CLEANING ORDINARY USE EXCEPTIONAL USE PROFESSIONAL USE
XPLUS deterplus vitaplus plusnovo sigilplusextraclean puliplus
NATURPLUS deterplus _ plusnovo puliplusextraclean
NATURPLUS2 deterplus _ plusnovo puliplusextraclean
INVISIBLE TOUCH green _ _ puliplus
OLEONATURE green revivo renovo _
NATIF oleonetto oleovivo oleonovo _extraclean
36
PRODUCTS / DESCRIPTIONSPackaging 1 Litre, unless otherwise specified Prix are €/piece VAT excluded
deterplusMild detergent for the cleaning of varnished wood floors. For routine use. 9,25
vitaplusProtective and renovating product for varnished not brushed wood floors. For ordinary use. 13,10
plusnovoSpecific product suitable to reduce the whitish effect caused by superficial scratches on varnished wood floors. 4,05Available in different colours. Packaging 0,25 litre
sigilplusProtective water-repellent liquid to seal Listone Giordano plank’s heads and sides. Recommended in particular for areas 21,30where the risk of water spilling is higher (ie kitchen and bathroom). Compulsory in any room with wood floor in Maple, Cherry and Beech with Xplus finish.Margaritelli accepts no responsibility for any installation of Beech, Maple or Cherry where Sigilplus has not been applied.
puliplusSpecial cleaning liquid to remove excess glue and stubborn stains from the surface of varnished wood floors. 10,35
oleonettoMild detergent composed of natural oils for the cleaning and maintenance of wood floors with Natif finish. 20,90For routine use.
oleovivoProtective and revitalising solution composed of natural oils for wood floors with Natif finish. For ordinary use. 22,65
oleonovoProduct for restoring scratches on wood floors with Natif finish. 20,90
Packaging 0,25 litre
extracleanIntensive detergent for extraordinary cleaning of tough dirt. 9,55
greenMild detergent for the cleaning of wood floors with Oleonature finish and Invisible Touch finish. For routine use. 6,00
revivoNatural oil-wax product, water based, suitable to nourish and protect wood floors with Oleonature finish. 19,90
renovoSpecific product suitable to regenerate scratches and small superficial stains of wood floors with Oleonature finish. 11,95Available in different colours. Packaging 0,25 litre
37
Wood SpeciesRESERVE Traccia
Oak Firenze 1299 Oak Agrigento 1881 Oak Siena 1348 Oak Mantova 1525 Oak Taormina 1410
RESERVE Filo di Lama
Oak Firenze 1420 Oak Agrigento 1087 Oak Erice 1460
RESERVE Mareggiata - DOC Mareggiata QUATTROCENTO ITALIANO
Oak Pisa 1173 Oak Amalfi 1266 Oak Genova 1260 Oak from Fontaines Oak from Fontaines Oak from Fontaines
Puro Biancospino Carvi
FAHRENHEIT
Oak from Fontaines Oak from Fontaines Ash from Fontaines Ash from Fontaines
380° F 430° F 350° F 460° F
ANCIEN ANTIQUE
European Walnut Oak Puro
Puro 40
Collections
Reserve is a wood floor collection with distinctive hand-planed and crafted treatments.
The natural evolution of the species. Unique wooden surfaces crafted by the human hand and enhancedby the sign of time in extra lage dimnesional boards. The wooden matter stands out in all its original beautyand amplitude.
This wood floor Collection is characterized by heating cycles of different intensity and duration. Thanks to thisnatural process the complete thickness of the wood acquires a dark colour tone.
Extra wide boards bring back to life the history and the charm of wood, to create unique and exclusive surfaces.
The hardwood flooring collection featuring boards in different widths and lengths for the Ancien installation patterns.
The characteristic amber hue, the distressed boards and the different dimensions characterize the timeless charm
of wood floors.
Finishes
OLEONATURE Natural oils-based finish air-dried, applied to a brushed surface. It is characterized by high protection and easy maintenance, thanks to a special treatment as last coating application.
NATIF Natural oils-based finish air-dried. It is characterized by a highly natural, matt appearance and the maintenance of a typical open-pore wood which requires periodic nourishment.
• Products in natural oil finishing, tend to get a yellowish colour tone should considered by any means as imperfection but on the contrary proof the authentic
the products be kept in the boxes for a long time or it does not get exposed to uniqueness of the product.
light and air. It’s an utterly natural and transitory phenomenon due to the • Wood is a natural and variegated material, therefore the descriptions above,
vegetable origin of the oils. This effect is totally reversible within a few hours, as well as photos and samples displayed do not fully represent the full colours'range
once the wood boards are exposed to direct sunlight whilst in an environment with in a comprehensive way the full range of colours, textures and peculiarities of each
artificial light it may take up to few weeks. indidividual product. The above descriptions, photos and samples should therefore be
• Listone Giordano Atelier wood floor features dimensional and aesthetic considered as indicative.
characteristics of a hand-made product. Therefore prospective tolerances (such • The features and specifications of the products stated in this document may
as coplanarity of the boards, homogeneity of the colour treatment) should not be be subject to alterations. 41
LENGTHS 1600-1900 mm
WIDTH 190 mm
WEIGHT 11 kg/m² approx.
TOTAL THICKNESS 18 mm
HARDWOOD THICKNESS 3,5 mmBATTEN SUPPORT COUNTER-BALANCED IN OAK
TRACCIAWood floor collection with distinctive hand-planed and crafted treatments.
WOOD SPECIES FEATURE Oleonature
OAK Firenze 1299 125,25Agrigento 1881 * 150,45Siena 1348 150,45Mantova 1525 150,45Taormina 1410 150,45
FILO DI LAMAWood floor with rough-sawn surface.
WOOD SPECIES FEATURE Oleonature
OAK Firenze 1420 130,10Agrigento 1087 * 151,85Erice 1460 151,85
MAREGGIATA Wood floor with handcrafted surface, which emphasizes the structure of knots and the most authentic characteristics of the species,as for a material
exposed naturally to the actions of the time.
WOOD SPECIES FEATURE Oleonature
OAK Pisa 1173 139,75Amalfi 1266 163,65Genova 1260 163,65
Prices are €/m² VAT excluded
• The outline of each strip of all Reserve products is characterized by chamfered colour tone of the surface, a marked presence of filled or open cracks, alongedges except for the product Filo di Lama which is only chamfered on with firm, consolidated or partially open knots.longitudinal sides. • All the products of the Réserve collection are available upon request.
• Material is supplied in random lengths subject to availability. The minimum order quantity is 35 m2. A 40% deposit is required for The material supplied may incorporate up to 20% of shorter lenghts all orders. compared to the ones mentioned in the price list. Please check availability and delivery time with the sales department• Orders of one fixed length will be individually evaluated. Once accepted a before placing the order.surcharge of 20% will be applied. • Suitable for floating or glued-down installation. Glued-down • These products first undergo a special heating treatment to intensify installation is recommended for use with underfloor heating and cooling system.the original colour of the wood combined with natural oils-based pigments
(transparent for Firenze and Pisa). * Occasionally available.• The flooring collection is characterized by a non-homogenous natural
14,5 mm
42
LENGTHS 2800 - 3000 mm
WIDTH 260 mm
WEIGHT 11 kg/m² approx.
TOTAL THICKNESS 18 mm
HARDWOOD THICKNESS 3,5 mm approx.
BATTEN SUPPORT COUNTER-BALANCED IN OAK
MAREGGIATA Wood floor with handcrafted surface, which emphasizes the structure of knots and the most authentic characteristics of the species,as for a material
exposed naturally to the actions of the time.
WOOD SPECIES FEATURE Oleonature
OAK Pisa 1173 167,05Amalfi 1266 190,90Genova 1260 190,90
Prices are €/m² VAT excluded
• The outline of each strip is characterized by chamfered edges. colour tone of the surface, a marked presence of filled or open cracks, along
• Material is supplied in random lengths subject to availability. with firm, consolidated or partially open knots.
The material supplied may incorporate up to 30% of shorter lenghts • All the products of the Doc collection are available upon request.
compared to the ones mentioned in the price list. The minimum order quantity is 35 m2. A 40% deposit is required for
• Orders of one fixed length will be individually evaluated. Once accepted a all orders.
surcharge of 20% will be applied. Please check availability and delivery time with the sales department
• These products first undergo a special heating treatment to intensify before placing the order.
the original colour of the wood combined with natural oils-based pigments • Suitable for floating or glued-down installation. Glued-down
(transparent for Pisa). installation is recommended for use with underfloor heating and cooling system.• The flooring collection is characterized by a natural non-homogenous
14,5 mm
43
140
LENGTHS mixed from 1200 to 2000 mm
WIDTH 140 mm
WEIGHT 11,5 kg/m² approx.
TOTAL THICKNESS 16 mm
HARDWOOD THICKNESS 5 mm
BIRCH WOOD MULTILAYER SUPPORT 11 mm
190
LENGTHS mixed from 1500 to 2000 mm
WIDTH 190 mm *WEIGHT 11,5 kg/m² approx.
TOTAL THICKNESS 16 mm
HARDWOOD THICKNESS 5 mm
BIRCH WOOD MULTILAYER SUPPORT 11 mm
WOOD SPECIES FEATURE 140 190
Natif, brushed Natif, brushed
OAK FROM FONTAINES 380°F 170,65 178,55430°F 178,55
ASH FROM FONTAINES 350°F 182,05460°F 182,05
Prices are €/m² VAT excluded
• The outline of each strip is characterized by chamfered edges. The minimum order quantity is 35 m2. A 40% deposit is required for all orders.• Material is supplied in random lengths subject to availability. Please check availability and delivery time with the sales departmentThe material supplied may incorporate up to 10% of shorter lenghts before placing the order.compared to the ones mentioned in the price list. • Glued-down installation is recommended for these products. • Orders of one fixed length will be individually evaluated. Once accepted a They are suitable for the installation on underfloor heating andsurcharge of 20% will be applied. cooling system.• These products feature characteristic colour tone variations even in the same
wood board due to the heating treatment process. As the time passes the floor * This product could be supplied in 180 mm width instead of 190 mm,tends to get lighter due to the exposure to the air and light. depending upon the availability of raw materials.• All the products of the Fahrenheit collection are available upon request.
44
LENGTHS mixed from 2000 to 3600 mm
WIDTHS 190/230/390 mm
WEIGHT 11,5 kg/m² approx.
TOTAL THICKNESS 15,5 mm
HARDWOOD THICKNESS 4 mm
MULTILAYER SUPPORT COUNTER-BALANCED IN OAK
11,5 mm
WOOD SPECIES FEATURE Oleonature
OAK FROM FONTAINES Puro 193,55Biancospino 199,20Carvi 199,20
Prices are €/m² VAT excluded
• The outline of each strip is characterized by chamfered edges. A 40% deposit is required for all orders.• Material is supplied in random lengths and widths subject to availability. Please check availability and delivery time with the sales departmentThe material supplied may incorporate up to 10% of shorter lenghts before placing the order.compared to the ones mentioned in the price list. • Suitable for floating or glued-down installation. Glued-down • Orders of one fixed length will be individually evaluated. Once accepted a installation is recommended for use with underfloor heating and surcharge of 20% will be applied. cooling system.• All the products of the Quattrocento italiano collection are available upon request. The minimum order quantity is 35 m2.
45
LENGTHS mixed from 1000 to 2000 mm
WIDTHS 90/125/140/190 mm
WEIGHT 11,5 kg/m² approx.
TOTAL THICKNESS 16 mm
HARDWOOD THICKNESS 5 mm
BIRCH WOOD MULTILAYER SUPPORT 11 mm
WOOD SPECIES FEATURE Natif
EUROPEAN WALNUT Puro 224,65Prices are €/m² VAT excluded
• The outline of each strip is characterized by chamfered edges. Each wood board in this collection is to be regarded as a unique piece of its own• Material is supplied in random lengths and widths subject to availability. featuring heavy and sometimes very dark grains.The material supplied may incorporate up to 15% of shorter lenghts • All the products of the Ancien collection are available upon request.
compared to the ones mentioned in the price list. The minimum order quantity is 35 m2. A 40% deposit is required for all orders.• Specific requests for a single length and/or width or for fixed lengths and/or Please check availability and delivery time with the sales department beforewidths will not be accepted. placing the order.• These products are also available in pre-sanded version with a reduction • Glued-down installation is recommended for these products.
of 18,25 €/m2 as to the price of the product with Natif finish. They are suitable for the installation on underfloor heating and• Walnut is a rare and prized wood species. cooling system. 46
LENGTHS mixed from 1000 to 2000 mm
WIDTHS 90/125/140/190 mm
WEIGHT 11,5 kg/m² approx.
TOTAL THICKNESS 16 mm
HARDWOOD THICKNESS 5 mm
BIRCH WOOD MULTILAYER SUPPORT 11 mm
WOOD SPECIES FEATURE Natif
OAK Puro 215,00Wood floor collection with distinctive hand-planed and crafted treatments. Prices are €/m² VAT excluded
In the collection 2013, Antique is not produced with historic material but with distressed steamed Oak.
• The outline of each strip is characterized by chamfered edges. The minimum order quantity is 35 m2. A 40% deposit is required for all orders.• Material is supplied in random lengths and widths subject to availability. Please check availability and delivery time with the sales departmentThe material supplied may incorporate up to 10% of shorter lenghts before placing the order.compared to the ones mentioned in the price list. • Glued-down installation is recommended for these products. • Specific requests for a single length and/or width or for fixed lengths and/or They are suitable for the installation on underfloor heating andwidths will not be accepted. cooling system.• All the products of the Antique collection are available upon request. 47
STAIR NOSINGS ( TYPE A)
ITEM A B C PRODUCTS
LENGTH WIDTH
1200 mm 190 mm 40 mm RESERVE TRACCIA 144,00RESERVE FILO DI LAMA OAK 167,85RESERVE MAREGGIATA OAK 144,00DOC MAREGGIATA OAK 144,00FAHRENHEIT OAK 155,25FAHRENHEIT ASH 155,25QUATTROCENTO ITALIANO OAK 144,00ANCIEN WALNUT 159,50ANTIQUE OAK 167,85
Prices are €/pc VAT excluded
STAIR NOSINGS ( TYPE B)
ITEM A B C PRODUCTS
LENGTH WIDTH
1200 mm 190 mm 190 mm RESERVE TRACCIA OAK 169,90RESERVE FILO DI LAMA OAK 198,05RESERVE MAREGGIATA OAK 169,90DOC MAREGGIATA OAK 169,90FAHRENHEIT OAK 183,20FAHRENHEIT ASH 183,20QUATTROCENTO ITALIANO OAK 169,90ANCIEN WALNUT 188,20ANTIQUE OAK 198,05
Prices are €/pc VAT excluded
• These products are available upon request. The delivery time for standard • The standard elements are not designed to be fitted side by side.elements is about 30 days from receipt of the order confirmation. Requests of fitting together more stair nosings may be considered onceFor products with sizes, shapes and colours other than the standard elements, the order is send in and may have an additional surcharge.availability and delivery terms will be communicated each individual time. • The handcrafted production of stair nosings may show characteristic A 40% deposit is required for all eventual orders. tolerances due to the hand-made process.• The frontal elements of the stair nosings do not have any special surface treatment.
FRONTAL HEIGHT NATURAL OIL
FRONTAL HEIGHT NATURAL OIL
48
ADEHESIVE
ITEM PRODUCTS
ECOLFIT (Silane eco-friendly one component adhesive) - tin 14 kg €/kg 5,75
VINYL GLUE (Adhesive for tongues and grooves for floating installation) - tin 0,50 kg €/pc 2,85Prices are €/kg and €/pc VAT excluded
UNDERLAY
ITEM PRODUCT
Cellfoam for floating installation. Thickness: 3 mm - package of 15m2 1,15
Prices are €/m² VAT excluded
REDUCERS
ITEM A B PRODUCTS
WIDTH
1200 mm 30 mm RESERVE TRACCIA OAK 64,70RESERVE FILO DI LAMA OAK 71,20RESERVE MAREGGIATA OAK 64,70DOC MAREGGIATA OAK 64,70FAHRENHEIT OAK 71,20FAHRENHEIT ASH 71,20QUATTROCENTO ITALIANO OAK 64,70ANCIEN WALNUT 71,20ANTIQUE OAK 71,20
Prices are €/pc VAT excluded
• The reducers are suitable for glued-down installation only. availability and delivery terms will be communicated each individual time.
• These products are available upon request. The delivery time for standard A 40% deposit is required for all eventual orders.
elements is about 30 days from receipt of the order confirmation. • The handcrafted production of the reducers may show characteristic
For products with sizes, shapes and colours other than the standard elements, tolerances due to the hand made process.
LENGTH NATURAL OIL
49
SKIRTING BOARDS 60x16 (veneer)
ITEM PRODUCTS
WOOD NATURAL UV oil* VARNISHED
Dimensions SPECIES FEATURE OIL ROUGH-SAWN
HEIGHT: 60 mm RESERVE TRACCIA OAK FIRENZE 1299 7,15 7,10THICKNESS: 16 mm TAORMINA 1410 11,90 7,10LENGTH: 2,40 m SIENA 1348 11,90 7,10
MANTOVA 1525 11,90 7,10AGRIGENTO 1881 11,90
RESERVE FILO DI LAMA OAK FIRENZE 1420 11,90AGRIGENTO 1087 11,90ERICE 1460 11,90 8,90
RESERVE MAREGGIATA OAK PISA 1173 7,15 7,10AMALFI 1266 11,90GENOVA 1260 11,90
DOC MAREGGIATA OAK PISA 1173 7,15 7,10AMALFI 1266 11,90GENOVA 1260 11,90
FAHRENHEIT OAK 7,10ASH 6,95
QUATTROCENTO ITALIANO OAK 7,10ANCIEN WALNUT 9,60ANTIQUE OAK 7,10
packages of 12 lin.m. or 24 lin.m. Prices are €/lin.m. VAT excluded
• These products are available upon request. The delivery time for standard may present differences in grain and colour compared to the corresponding
elements is about 30 days from receipt of the order confirmation. wood floor material.
• The skirting boards do not have any special surface treatment except for
skirting boards "varnished rough-sawn". * These skirting boards are produced by digital print on veneer wood.
• The wood veneer coating the skirting board (veneered versions) 50
CLEANING AND MAINTENANCE PRODUCTS / COMPATIBILITY CHART
COLLECTION CLEANING ORDINARY USE EXCEPTIONAL USE PROFESSIONAL USE
FAHRENHEITANCIEN oleonetto oleovivo oleonovo _ANTIQUE extraclean
RESERVEDOC green revivo renovo _QUATTROCENTO ITALIANO
PRODUCTS / DESCRIPTIONSPackaging 1 Litre, unless otherwise specified Prices are €/piece VAT excluded
oleonettoMild detergent composed of natural oils for the cleaning and maintenance of wood floors with Natif finish. 20,90For routine use.
oleovivoProtective and revitalising solution composed of natural oils for wood floors with Natif finish. For ordinary use. 22,65
oleonovoProduct for restoring scratches on wood floors with Natif finish. 20,90
Packaging 0,25 litre
extracleanIntensive detergent for extraordinary cleaning of tough dirt. 9,55
greenMild detergent for the cleaning of wood floors with Oleonature finish. 6,00For routine use.
revivoNatural oil-wax product, water based, suitable to nourish and protect wood floors with Oleonature finish. 19,90
renovoSpecific product suitable to regenerate scratches and small superficial stains of wood floors with Oleonature finish. 11,95Available in different colours. Packaging 0,25 litre
51
Wood Species
MEDOC
Oak Medoc #01 Oak Medoc #02 Oak Medoc #03 Oak Medoc #04
QUADRONE
Ancient Teak
VIBRAZIONI
SLIDE
Oak Avorio Oak Avana Oak Tortora Oak Testa di Moro
FOXTROT
Oak Avorio Oak Avana Oak Tortora Oak Testa di Moro
54
CollectionsIt features trapezoidal-shaped wood boards weaving a contemporary pattern, inspired by ancient values.
Design: Michele De Lucchi with Philippe Nigro
Wooden floor reinterpreting historical European tradition of decorative wooden panels in a contemporary style.This product is made using entirely reclaimed solid Teak sourced from the restoration of ancient beams.
Design: Michele De Lucchi with Philippe Nigro
Wood floor distinguished by the angled cut just the heads of the planks. A sign capable of giving light and elegant modern movement
in a floor based on the random composition of three different shades of gray.
Design: Marco Tortoioli Ricci
Modular floor covering made of three trapezoidal geometrical shapes . Simple sliding movements along the trapezoid’s bases or
according to the oblique sides’ thread combined with free rotation create countless patterns.The planning of specific geometric relations in defining the shapes results in original and unique configurations.Design: Daniele Lago
Modular floor covering made of three geometrical shapes: one square and two rectangles which keep the balance between
lines and surfaces, between materials and colours inspired by a sign of modernity.
Design: Matteo Nunziati
FinitionsOLEONATURE Natural oils-based finish air-dried, applied to a brushed surface. It is characterized by high
protection and easy maintenance, thanks to a special treatment as last coating application.
NATURPLUS2 Solvents-free varnish, characterized by a natural finish aspect. It is applied after a brushing treatment of the surface. The Naturplus2 version, compared to Naturplus, highlights a sculptural pore effect and a less glossy surface.The finish features Crystalcare antibacterial technology.
OLEOSTRONG Special UV oils finishing, this enhances the natural beauty of the wood and intensity of the colour.It is applied after a brushing treatment of the surface. It ensures an easy maintenance and high-resistanceto penetration of liquids and domestic chemicals.
• Products in natural oil finishing, tend to get a yellowish colour tone should • Wood is a natural and variegated material, therefore the descriptions above,
the products be kept in the boxes for a long time or it does not get exposed to as well as photos and samples displayed do not fully represent the full colours'range
light and air. It’s an utterly natural and transitory phenomenon due to the in a comprehensive way the full range of colours, textures and peculiarities of each
vegetable origin of the oils. This effect is totally reversible within a few hours, indidividual product. The above descriptions, photos and samples should therefore be
once the wood boards are exposed to direct sunlight whilst in an environment with considered as indicative.
artificial light it may take up to few weeks. • The features and specifications of the products stated in this document may
• Listone Giordano Natural Genius wood floor features dimensional and aesthetic be subject to alterations.
characteristics of a hand-made product. Therefore prospective tolerances (such
as coplanarity of the boards, homogeneity of the colour treatment) should not be
considered by any means as imperfection but on the contrary proof the authentic
uniqueness of the product.55
design Michele De Lucchi with Philippe Nigro
LENGTHS 944 mm
WIDTHS 130-190 mm
WEIGHT 11 kg/m² approx.
TOTAL THICKNESS 18 mm
HARDWOOD THICKNESS 3,5 mm
BATTEN SUPPORTCOUNTER-BALANCED IN OAK
WOOD SPECIES FEATURE Oleonature
OAK Medoc#01 224,10Medoc#02 215,15Medoc#03 * 224,10Medoc#04 * 224,10
Prices are €/m² VAT excluded
It features trapezoidal-shaped wood boards weaving a contemporary pattern, inspired by ancient values.
• The outline of each strip is characterized by chamfered edges. The minimum order quantity is 35 m2. A 40% deposit is required for all orders.• In order to lay this specific geometric pattern, boards of the same shape Please check availability and delivery time with the sales department beforewill be supplied half A and half B (see technical drawing). placing the order.• The boards are specially ‘groove-groove’ milled on the support base and interlock • Glued-down installation is recommended for these products. on all four sides by loose wooden tongue-joints supplied with the flooring. They are indicated for the installation on underfloor heating and• The Oak is firstly heat treated to intensify the original colour. This product has cooling system. a marked non homogeneous colour tone and a widespread presence of filled or
open cracks and knots. * Occasionally available.• All the products of the Medoc collection are available upon request.
14,5 mm
56
design Michele De Lucchi with Philippe Nigro
LENGTH 1000 mm
WIDTH 1000 mm
WEIGHT 12 kg/m² approx.
WOOD SPECIES To be finished on site
ANCIENT TEAK 322,50Prices are €/m² VAT excluded
Wooden floor reinterpreting historical European tradition of decorative wooden panels in a contemporary style.This product is made using entirely reclaimed solid Teak sourced from the restoration of ancient beams.
• In order to facilitate the logistic and fitting operations, each module is supplied in A 40% deposit is required for all orders.6 specific elements: 2 side stripes 250x1000 mm + 4 middle stripes 250x500 mm, Please check availability and delivery time with the sales departmenteach one of them incorporating 7 smaller elements. before placing the order.• The two different types of panels, as described above, are groove profiled • Suitable for both glue-down and floating installation. The wooden tongues areon four sides, loose wooden tongue-joints are supplied with the flooring. to be glued to all four sides of each module in case of floating fitting.• Each element is enhanced by a slight chamfered edge. The glued-down installation is recommended with underfloor heating and • This wood flooring is supplied unfinished to be treated on site with specific cooling system.protection coating. • The Quadrone collection does not feature standard accessory elements • A preliminary project of the surface is necessary to order the correct number of (reducers, stair nosings and skirting boards) as they are part of an integrated modules and related waste due to perimeter cutting of the elements (usually interior design project. calculated between 5% and 10% though percentage may vary according to Special items can be manufactured upon specific estimate. A 40% deposit is dimension and shape of the area to be laid). Please refer to technical sheets for required for all eventual orders.installation patterns' design.• The product is available upon request. The minimum order quantity is 35 m2.
TOTAL THICKNESS SOLID WOOD 18,5 mm
57
design Marco Tortoioli Ricci
LENGTH 781 mm
WIDTH 90 mm
WEIGHT 8 kg/m² approx.
TOTAL THICKNESS 11 mm
HARDWOOD THICKNESS 3,5 mm
WOOD SPECIES FEATURE Naturplus2
OAK VIBRAZIONI#01 129,80Prices are €/m² VAT excluded
Wood floor distinguished by the angled cut just the heads of the planks. A sign capable of giving light and elegant modern movement in a floor based on the random composition of three different shades of gray.
• The supply is divided, in equal amounts, in three different colors. The random before placing the order.fitting provides a contemporary and highly innovative design. • Glued-down installation is recommended for these products. • The product is available upon request. The minimum order quantity is 35 m2. They are indicated for the installation on underfloor heating andA 40% deposit is required for all orders. cooling system.Please check availability and delivery time with the sales department
BIRCH WOOD MULTILAYER SUPPORT 7,5 mm
58
design Daniele Lago
LENGTHS 565 - 600 - 371 mm
WIDTHS 565 - 413 - 571 mm
WEIGHT 11 kg/m² approx
TOTAL THICKNESS 13 mm
HARDWOOD THICKNESS 1 mm
MULTILAYER COUNTER-BALANCED SUPPORT
WOOD SPECIES FEATURE Oleostrong
OAK AVANA Module 1 139,15Module 2 139,15Module 3 153,70
OAK AVORIO Module 1 139,15Module 2 139,15Module 3 153,70
OAK TORTORA Module 1 139,15Module 2 139,15Module 3 153,70
OAK TESTA DI MORO Module 1 139,15Module 2 139,15Module 3 153,70
Prices are €/m² VAT excluded
Modular floor covering ((Ref. UNI EN 14354) made of three trapezoidal geometrical shapes (Module 1, Module2, Module 3). Simple sliding movements along the trapezoid’s bases or according to the oblique sides’ thread combined with free rotation create countless patterns.The planning of specific geometric relations in defining the shapes results in original and unique configurations. Just two elements (Module 2 + Module 3) may create a flooring surface featuring a-periodic patterns, which can expand without ever replicating themselves.
• Each individual module is groove profiled on four sides, loose wooden tongue-joints Please check availability and delivery time with the sales department
are supplied with the flooring. before placing the order.
• The outline of each module is characterized by chamfered edges. • Suitable for both glue-down and floating installation. The wooden tongues are
• The section of the product shows a core of 11 mm multilayer, 10/10 mm top layer to be glued to all four sides of each module in case of floating fitting.in Oak veneer and the bottom layer in 10/10 mm counterbalanced veneer in a Glued-down installation is recommended for use with underfloor heating different wood species. and cooling system.• A preliminary project of the surface is necessary to order the correct number of • The Slide collection does not feature standard accessory elements modules and related waste due to perimeter cutting of the elements (usually (reducers, stair nosings and skirting boards) as they are part of an integrated calculated between 15% and 20% though percentage may vary according to interior design project. Special items can be manufactured upon specific dimension and shape of the area to be laid). Please refer to technical sheets for estimate. A 40% deposit is required for all eventual orders.installation patterns' design.• All the products of the Slide collection are available upon request. The minimum order quantity is 35 m2. A 40% deposit is required for all orders.
12 mm
59
design Matteo Nunziati
LENGTHS 480 - 960 - 960 mm
WIDTHS 480 - 160 - 320 mm
WEIGHT 11 kg/m² approx.
TOTAL THICKNESS 13 mm
HARDWOOD THICKNESS 1 mm
MULTILAYER COUNTER-BALANCED SUPPORT 12 mm
WOOD SPECIES FEATURE Oleostrong
OAK AVANA 142,85OAK AVORIO 142,85OAK TORTORA 142,85OAK TESTA DI MORO 142,85
Prices are €/m² VAT excluded
Modular floor covering (Ref. UNI EN 14354) made of three geometrical shapes: one square and two rectangles which keep the balance between lines and surfaces, between materials and colours inspired by a sign of modernity.
• The standard order incorporates: nr. 2 modules 480x480 mm, nr. 6 modules A 40% deposit is required for all orders.160x960 mm and nr. 4 modules 320x960 mm. Please check availability and delivery time with the sales department• Each individual module is groove profiled on four sides, loose wooden tongue-joints before placing the order.are supplied with the flooring. • Suitable for both glue-down and floating installation. The wooden tongues are• The outline of each module is characterized by chamfered edges. to be glued to all four sides of each module in case of floating fitting.• The section of the product shows a core of 11 mm multilayer, 10/10 mm top layer Glued-down installation is recommended for use with underfloor heating in Oak veneer and the bottom layer in 10/10 mm counterbalanced veneer in a and cooling system.different wood species. • The Foxtrot collection does not feature standard accessory elements • A preliminary project of the surface is necessary to order the correct number of (reducers, stair nosings and skirting boards) as they are part of an integrated modules and related waste due to perimeter cutting of the elements (usually interior design project. calculated between 5% and 10% though percentage may vary according to Special items can be manufactured upon specific estimate. A 40% deposit is dimension and shape of the area to be laid). Please refer to technical sheets for required for all eventual orders.installation patterns' design.• All the products of the Foxtrot collection are available upon request.
The minimum order quantity is 35 m2. 60
STAIR NOSINGS ( TYPE A)
ITEM A B C PRODUCTS
NATURAL OIL VARNISHED
LENGTH WIDTH BRUSHED
1200 mm 190 mm 40 mm NATURAL GENIUS_MEDOC OAK 167,85
1200 mm 90 mm 40 mm NATURAL GENIUS_VIBRAZIONI OAK 72,00Prices are €/pc VAT excluded
STAIR NOSINGS ( TYPE B)
ITEM A B C PRODUCTS
NATURAL OIL VARNISHED
LENGTH WIDTH BRUSHED
1200 mm 190 mm 190 mm NATURAL GENIUS_MEDOC OAK 198,05
1200 mm 90 mm 90 mm NATURAL GENIUS_VIBRAZIONI OAK 85,00Prices are €/pc VAT excluded
SKIRTING BOARDS 60x16 (veneer)
ITEM PRODUCTS NATURAL VARNISHED VARNISHED
WOOD OIL BRUSHED ROUGH-SAWN
Dimensions SPECIES FEATURE
HEIGHT: 60 mm NATURAL GENIUS_MEDOC OAK MEDOC#01 11,90 8,90THICKNESS: 16 mm MEDOC#02 #03 #04 11,90LENGTH: 2,40 m NATURAL GENIUS_VIBRAZIONI OAK 15,50
NATURAL GENIUS_SLIDE OAK 7,35NATURAL GENIUS_FOXTROT OAK 7,35
packages of 12 lin.m. or 24 lin.m. Prices are €/lin.m. VAT excluded
• These stair nosings are available upon request. The delivery time for standard • The wood veneer coating the skirting board (veneered versions)elements is about 30 days from receipt of the order confirmation. may present differences in grain and colour compared to the correspondingFor products with sizes, shapes and colours other than the standard elements, wood floor material.availability and delivery terms will be communicated each individual time. • The skirting boards do not have any special surface treatment except for
A 40% deposit is required for all eventual orders. skirting boards "varnished rough-sawn".
• The frontal elements of the stair nosings do not have any special surface • Skirting boards are available upon request. Delivery approximately
treatment. 30 days upon receipt of the order confirmation.
• The standard elements are not designed to be fitted side by side. A 40% deposit is required for all orders.
Requests of fitting together more stair nosings may be considered once
the order is send in and may have an additional surcharge.
• The handcrafted production of the stair nosings may show characteristic
tolerances due to the hand made process.
FRONTAL HEIGHT
FRONTAL HEIGHT
61
ADEHESIVE
ITEM PRODUCTS
ECOLFIT (Silane eco-friendly one component adhesive) - tin 14 kg €/kg 5,75
VINYL GLUE (Adhesive for tongues and grooves for floating installation) - tin 0,50 kg €/pc 2,85Prices are €/kg and €/pc VAT excluded
UNDERLAY
ITEM PRODUCT
Cellfoam for floating installation. Thickness: 3 mm - package of 15m2 1,15
Prices are €/m² VAT excluded
REDUCERS
ITEM A B C PRODUCTS
WIDTH THICKNESS
1200 mm 30 mm 18 mm NATURAL GENIUS_MEDOC OAK 71,20 __
1200 mm 30 mm 11 mm NATURAL GENIUS_VIBRAZIONI OAK 50,75
Prices are €/pc VAT excluded
• The reducers are suitable for glued-down installation only. availability and delivery terms will be communicated each individual time.
• These products are available upon request. The delivery time for standard A 40% deposit is required for all eventual orders.elements is about 30 days from receipt of the order confirmation. • The handcrafted production of the reducers may show characteristic For products with sizes, shapes and colours other than the standard elements, tolerances due to the hand made process.
NATURAL OILLENGTHVARNISHED BRUSHED
62
CLEANING AND MAINTENANCE PRODUCTS / COMPATIBILITY CHART
COLLECTION CLEANING ORDINARY USE EXCEPTIONAL USE PROFESSIONAL USE
VIBRAZIONI deterplus _ _ puliplus
SLIDE green _ _ puliplusFOXTROT
MEDOC green revivo renovo _
PRODUCTS / DESCRIPTIONSPackaging 1 Litre, unless otherwise specified Prices are €/piece VAT excluded
puliplusSpecial cleaning liquid to remove excess glue and stubborn stains from the surface of varnished wood floors. 10,35
deterplusMild detergent for the cleaning of varnished wood floors. For routine use. 9,25
greenMild detergent for the cleaning of wood floors with Oleonature and Oleostrong finish. 6,00For routine use.
revivoNatural oil-wax product, water based, suitable to nourish and protect wood floors with Oleonature finish. 19,90
renovoSpecific product suitable to regenerate scratches and small superficial stains of wood floors with Oleonature finish. 11,95Available in different colours. lt. 0,25
63
CertificationsEcological, environmental and product quality
Biosphera is a marking system based PEFC FSCupon Listone Giordano's green procurement Certification of the chain of custody that Certification of the chain of custody
policy which fulfills the need to provide the guarantees the provenance of products that guarantees the provenance from forests
end-consumer with a brief, clear and useful from forests managed in an ecologically managed according to strict environmental,
piece of information regarding the source of sustainable manner. social and economic standards.
the raw materials used in the manufacturing
process. This focuses uniquely on the
safeguard of the forests with regards to the
specific characteristics of multilayer wood
flooring. Therefore it is not meant to replace
the international certification protocols of
broad diffusion, which usually refer to wider
fields of interest and application.
Listone Giordano, through this protocol, aims
at promoting the culture of environmental
responsibility and the purchase of certified ISO 9001 ISO14001 CE Certificationwood species. Quality Management Environmental Management Listone Giordano strictly complies
System Certification. System Certification. to all CE rules. Listone Giordano oil
and varnish finishes meet the emission
This mark identifies raw materials whose limits for harmfull substances under
forestry management is certified according the CE marking of toys for the children
to international standard in accordance with UNI EN 71-3:2002.
(FSC, PEFC, SFI, OLB, LEI, etc.)
This mark identifies raw materials whose
legal sourcing and forestry management,
although not yet certified, is backed up by Formaldehyde Solvent-free Anti-bacterial finishspecific audit and related papers. Listone Giordano fully complies No emission of solvents, as resulting Listone Giordano varnished finishes
This usually represents an intermediate step to the class E1 regulation, which from the analyses conducted on Listone are antibacterial certified by CATAS
towards the forestry certification. is amongst the strictest European Giordano by the SERECO BIOTEST S.p.a laboratories according to ISO
regulations (UNI EN 14342). chemical laboratory. 22196:2007 regulation.
64
Information on hardwood flooringPlease read the notes below to get the right information on the simple characteristics of use and natural reactions of wood flooring.
Wood: a living material
Wood is a “living material”, therefore changes in shape and colour are natural alterations in the wood structure and in the worst cases this can create
and inevitable effects originating from exterior elements, such as light, air, micro-fractures on the top hardwood layer. To avoid this kind of problem
temperature, humidity and daily use (wear and tear). installation should commence only after the temperature and atmospheric
It is important to be aware that: moisture content has been checked. After installation the temperature of the
• Colour change in hardwood flooring is a natural characteristic. The colour room should be maintained at the recommended levels.
of hardwood flooring depends not only on the colour of the wood fibres, but • The varnish on the hardwood surface has a protective function, but depending
also on particular substances known as extractives which change due to intensity, wear and tear on the floor can produce a certain degree of opacity
exposure to light and air. This reaction is visible as well on the versions with of the varnish.
coloured finishes, by a mean which is directly proportioned to the intensity of • The individual hardness of wood differs from species to species but all timbers
the colour tone. processed to become hardwood floors are suitable for this application. Surface
• Because of the greater presence of extractives in tropical woods, these species indentations may arise in even the hardest of woods if the hardwood floor is
are particularly prone to chromatic changes and usually evolve into a dark brown subjected to knocks, falling objects, stiletto heels etc…As hardwood flooring is
colour tone. Iroko and Doussié are two species that can experience a strongly a product of nature, these indentations must not be considered as defects
marked variation in colour tone, and Doussié in particular can show localized within the floor.
effects of rapid and intense oxidation even on boards originally of the same colour • Wood is not characterised by uniformity-regularity typical of synthetic material,
tone. Under these specific conditions known as “oxidation reaction”, traces of two hardwood floors of the same timber will never have an identical aesthetic
silica, where are a natural part of the structure of wood, can become more evident. appearance. Therefore a few sample strips can only represent an illustration or
On the contrary the colour variety of Tek tends to homogenise to a middleclear general idea of the final aesthetic result and cannot fully comply with the
tone when exposed to light. finished hardwood floor.
• On the other hand, the long exposure of the floor to direct sunlight, perhaps filtering • All products with crafted treatments or with treatments on the colour of the wood
from window panes, may cause discoloration of the floor (due to the well known feature dimensional and aesthetic characteristics of a hand-made product.
characteristics of the sun UV rays to discolor/alter materials other than wood). Therefore prospective tolerances related, for instance, to the planarity of the boards,
In order to prevent this, we recommend the use of curtains or special UV filter film non homogeneity of the colour treatment and little discolouring, etc. attest the
to be applied to the glass. craftsmanship value of the product itself. Each individual board is different
• The natural characteristic of the extra wide wood boards, associated with the from the other and this irregularity makes it a unique piece.typical varied grain of the tangential cut, may cause slight fractures in The distinctive crafted finishes can create some irregularity and splintering of the
correspondence with the medullary rays. This natural phenomenon could be more wood surface where cloth used for cleaning and maintenance may get trapped.
evident should the wood floor suffer from severe climatic conditions. Please consider this carefully when walking with bare feet on the floor.
• Strips from a perfect radial section of a log in some species (in particular • Products with natural oil finishing, tend to get a yellowish colour tone should
Oak and Beech) feature straight grains and typical silver figures, the so called the products be kept in the boxes for a long time or it does not get exposed to
“Medullary ray”. This type of graining emphasizes the quality and the value of light and air. It’s an utterly natural and transitory phenomenon due to the
the wood. In addition to the aesthetical appearance, regularity of the fibres is vegetable origin of the oils. This effect is totally reversible within a few hours,
an indication of better technical performances (stability and impermeability). once the wood boards are exposed to direct sunlight whilst in an environment with
• During its lifetime wood is in contact with the environment and suffers from artificial light it may take up to few weeks.
variations in humidity and temperature and as a result is inclined to distort and
adapt in form and dimension. To achieve satisfactory installation, rooms should • The oils-based finishing has the characteristic to continue over time to permeate
be maintained at an ideal temperature between 15º C - 30º C with the humidity the wood fibers, particularly in tropical species, even while the material is still inside
of the atmosphere between 45% - 65%. These conditions provide as well a the packaging. The possible appearance of surface dryness that you should notice
healthy and well environment to live in. on newly laid planks, will be reset with the application of the specific product
Despite the improved stability attained because of the multi layer support, for periodic maintenance.
very dry atmospheric conditions can lead the wood to shrink and lead to tiny
gaps between wood strips. This phenomenon is reversible in correct climatic The above described effects belong to the hardwood floor nature therefore
conditions. On the contrary, higher environmental moisture produces stress and can not be considered defects in any way.
65