Price List - IML › Wood testing systems, articulators ...€¦ · The new developed...

Price ListInnovative Systems For The Dental Technology

With passion and precision

All information contained in this price list has been prepared with the utmost care. However, errors cannot be excluded.

IML-Instrumenta Mechanik Labor System GmbH assumes neither legal responsibility nor any liability for the consequences of such errors or mistakes. The information contained herein may be modified without notice.

No liability is accepted for printing or typographical errors. This price list is valid until the publication of a new price list, subject to price corrections due to any technical improvements. This price list supersedes all previously valid price lists.

Any kind of reproduction or processing by means of electronic systems, or distribution of the present or any part of it without prior written approval of IML-Instrumenta Mechanik Labor System GmbH is strictly prohibited.

Product information in this price list is limited to a few fundamental properties and practical applications. Detailed information is available in our brochures or on our website: www.iml-service.com

All prices quoted are exclusive of VAT (within Germany), freight, packaging and insurance costs. Unless otherwise stated, all prices are in euro per unit.

All prices are subject to change. We deliver in accordance with our general terms and conditions. Changes with regard to better function, performance, durability and technical improvements are reserved. Update and repair prices are not included in this price list. The following products are similar to those in the illustrations.

© 2019 IML-Instrumenta Mechanik Labor System GmbH. All rights reserved. Dated 03/2019.

3Innovative Systems For The Dental Technology

Table of ContentsInnovative Systems For The Dental Technology

IML-Semi-Adjustable Articulator S24

IML-Articulator BASIC S24

IML-Semi-Adjustable Articulator S24 8-9

IML-Articulator BASIC S24 6-7

IML-Mounting Articulator S24 IML-Mounting Articulator S24 4-5

IML-Fully-Adjustable Articulator S24 IML-Fully-Adjustable Articulator S24 10-11

IML-Mounting Plates PVC Mounting Plates 20

Aluminium Mounting Plates 20

IML-Casting System 20

Casting Socket 20

Nut plate with rubber ring 21

IML-Synchronization Key 21

Accessories IML-Articulators S24 Incisal Pin Set 18

IML-Micro Adjustable Incisal Pin 18

IML-Window Incisal Pin S24 18

45° Stilt 19

About IML About the IML Company 24-25

General Delivery and Payment Terms General Delivery and Payment Terms 26-27

IML-Transfer Systems IML-Transfer Socket S24 23

IML-Transfer Stand S24 23

IML-Transfer Table S24 23

IML-Facebow S24 and Accessories IML-Facebow S24 16

IML-Hinge Support S24 17

IML-Bite Fork Set S24 17

IML-Arcon Articulator S24

IML-Articulator S24 Sideshift

IML-Arcon Articulator S24 14-15

IML-Articulator S24 Sideshift 12-13

Product Consulting

Contact

New: Free shipping all over Germany for online orders. – „IML - With Passion and Precision“

Phone: +49 6222 6797-0 Fax: +49 6222 6797-10 Email: [email protected]

Accessories IML-Articulators S24 IML-Incisal Disc S24 22

4 Innovative Systems For The Dental Technology

IML-Mounting Articulator S24



The newly developed IML-Articulators are made out of high-strength and light aluminium. Therefore the Articula-tors perfectly fit for daily use. The IML-Mounting Articulator S24 is characterised by high robustness and by a wide view field for the ideal handling of the model in the Articulator.

• Rugged Articulator version• Fixed condylar track inclination and fixed Bennett-angle• Individual laser inscription of the exchangeable coverplate• New! Construction heights of 116 / 118 / 126 mm

Scope Of Delivery (Standard):• IML-Mounting Articulator S24• Mounting plates for top and bottom side• 45° stilt• Incisal pin with numeric scale adjustable from -5 to +10 mm• Incisal disc• Roll-bar increases the stability of the

IML-Mounting Articulator S24• Screwable pin for vertical support


IML-Mounting Articulator S24 - 116 mm red / grey Item No. 21210-116 239,00 €

IML-Mounting Articulator S24 - 116 mm blue /grey Item No. 21110-116 239,00 €

IML-Mounting Articulator S24 - 118 mm red / grey Item No.. 21210-118 239,00 €

IML-Mounting Articulator S24 - 118 mm blue /grey Item No. 21110-118 239,00 €

IML-Mounting Articulator S24 - 126 mm red / grey Item No. 21210-126 239,00 €

IML-Mounting Articulator S24 - 126 mm blue / grey Item No. 21110-126 239,00 €

Individual Laser Marking per Cover Plate

Laser Marking + ( 38,50 € Setup Costs per order / template Item No. 4000167 ) Item No. 10100-160 9,90 €



The newly developed IML-Articulators are made out of high-strength and light aluminium. Therefore the Articulators perfectly fi t for daily use. The IML-Articulator BASIC S24 is characterised by high robustness and by a wide view fi eld for the ideal handling of the model in the Articulator.

• NON-ARCON construction• Basic Articulator version• Fixed 35° condylar track inclination• Fixed 15° Bennett-angle• Individual laser inscription of the exchangeable coverplate• New! Construction heights of 116 / 118 or 126 mm

Scope Of Delivery (Standard):• IML-Articulator BASIC S24• Mounting plates for top and bottom side• 45° stilt• Incisal pin with numeric scale adjustable from -5 to +10 mm• Incisal disc• Screwable pin for vertical support


IML-Articulator BASIC S24 - 116 mm red / grey / black Item No. 23210-116 240,00 €

IML-Articulator BASIC S24 - 116 mm blue / grey / black Item No. 23110-116 240,00 €









The newly developed IML-Articulators are made out of high-strength and light aluminium. Therefore the Articu-lators perfectly fit for daily use. The IML-Semi-Adjustable Articulator S24 (NON-ARCON Construction) has an adjusta-ble Bennett-angle from 0° - 25°.

• NON-ARCON construction• Adjustable Bennett-angle from 0° to 25° with an

easy-to-read measuring scale• Non-slip knurled screw for locking the Bennett-angle• Centric click lock for quick clamping of the axis ball• Uncomplicated determination of the Bonwill-triangle• Dorsal sector is ideal visible through wide view field• Compatible with common casting systems• Individual laser inscription of the exchangeable coverplate• New! Construction heights of 116 / 118 / 121 or 126 mm

Scope Of Delivery (Standard):• IML-Semi-Adjustable Articulator S24• Mounting plates for top and bottom side• 45° stilt• Incisal pin with numeric scale adjustable from -5 to +10 mm• Incisal disc• Screwable pin for vertical support


IML-Semi-Adjustable Articulator S24 - 116 mm red / grey Item No. 20210-116 296,00 €

IML-Semi-Adjustable Articulator S24 - 116 mm blue / grey Item No. 20110-116 296,00 €



IML-Semi-Adjustable Articulator S24 - 121 mm gold / grey Item No. 20310-121 296,00 €






IML-Fully-Adjustable Articulator S24



The newly developed IML-Articulators are made out of high-strength and light aluminium. Therefore the Articula-tors perfectly fit for daily use. The IML-Fully-Adjustable Arti-culator S24 (NON-ARCON Construction) has an adjustable Bennett-angle and a variable condylar track inclination.

• NON-ARCON construction• Adjustable Bennett-angle from 0° to 25° with an

easy-to-read measuring scale• Condylar track inclination from -15° to +60°

continously adjustable• Non-slip knurled screws for locking the Bennett-angle

and the condylar track inclination• Centric click lock• Uncomplicated determination of the Bonwill-triangle• Dorsal sector is ideal visible through wide view field• Compatible with common casting systems• Individual laser inscription of the exchangeable coverplate• New! Construction heights of 116 / 118 / 121 or 126 mm

Scope Of Delivery (Standard):• IML-Fully-Adjustable Articulator S24• Mounting plates for top and bottom side• 45° stilt• Incisal pin with numeric scale adjustable from -5 to +10 mm• Incisal disc• Screwable pin for vertical support


IML-Fully-Adjustable Articulator S24 - 116 mm red / grey Item No. 20210-216 398,00 €

IML-Fully-Adjustable Articulator S24 - 116 mm blue / grey Item No. 20110-216 398,00 €



IML-Fully-Adjustable Articulator S24 - 121 mm gold / grey Item No. 20310-221 398,00 €







Extension for IML-Semi-Adjustable Articulator S24 & IML-Fully-Adjustable Articulator S24

The Sideshit Upper Part enables the sideways movement of the upper part in horizontal direction.

IML-Semi-Adjustable Articulator S24 Sideshift

IML-Fully-Adjustable Articulator S24 Sideshift

IML-Semi-Adjustable Articulator S24 Sideshift - 116 mm red / grey Item No. 20210-316 395,00 €

IML-Semi-Adjustable Articulator S24 Sideshift - 116 mm blue / grey Item No. 20110-316 395,00 €



IML-Semi-Adjustable Articulator S24 Sideshift - 121 mm gold / grey Item No. 20310-321 395,00 €



IML-Fully-Adjustable Articulator S24 Sideshift - 116 mm red / grey Item No. 20210-416 498,00 €

IML-Fully-Adjustable Articulator S24 Sideshift - 116 mm blue / grey Item No. 20110-416 498,00 €



IML-Fully-Adjustable Articulator S24 Sideshift - 121 mm gold / grey Item No. 20310-421 498,00 €







The new developed IML-Articulators are made out of high-strength and light aluminium. Therefore, the Articulators perfectly fi t for daily use. The IML-Arcon Artikulacor S24 is fully adjustable with continously adjustable sideshift function.

• ARCON construction• Adjustable Bennett-angle from 0° to 25° with an

easy-to-read measuring scale• Condylar track inclination from -15° to +60°

continously adjustable• Continously adjustable sideshift function• Protrusion adjustable from 0 mm - 6 mm• Retrusion adjustable from 0 mm - 2 mm• Distraction adjustable from 0 mm - 3 mm• Compatible with common casting systems• Individual laser inscription of the exchangeable coverplate• New! Construction heights of 116 / 118 / 121 or 126 mm

Scope Of Delivery (Standard):• IML-Arcon Articulator S24• 45° stilt• Incisal pin with numeric scale adjustable from -5 to +10 mm• Incisal disc• Screwable pin for vertical support


IML-Arcon Articulator S24 - 116 mm red / grey Item No. 22210-116 859,00 €

IML-Arcon Articulator S24 - 116 mm blue / grey Item No. 22110-116 859,00 €



IML-Arcon Articulator S24 - 121 mm gold / grey Item No. 22310-121 889,00 €



IML-Arcon Articulator S24 in 45° stilt position




IML-Facebow S24

IML-Facebow S24 (Version A) colourless / grey Item No. 30010-100 498,00 €

IML-Facebow S24 (Version S) colourless / grey Item No. 30030-100 498,00 €

IML-Facebow S24 (Version I) colourless / grey Item No. 30010-110 498,00 €

The new series of IML-Facebows S24 ensures effi cient and uncomplicated working with the patient through an innovative handling.

• The IML-Facebow S24 has a maximum width of 180 mm• Fast fi xing of the cranium-axis-relation through an inno-

vative grating• Continously adjustable with a non-slip thumb wheel• Comfortable adaption of the ear pieces through an

accurate adjustment• Determination of the intercondylar distance on an easy-

to-read measuring scale from 100 mm to 180 mm• Light but high-strength aluminium construction ensures

an effi cient handling• Reference planes ‚Frankfurter Horizontal‘ and ‚Camper‘s

Plane‘ with IML-Facebow S24 applicable• Individual laser inscription according to your specifi cations• Direct transmission of the mouth situation in the

IML-Articulator S24 with the IML-Hinge Support S24• Toggle screw ensures the safe lock of the

IML-Hinge Support S24

Scope Of Delivery (Standard):• IML-Facebow S24 in selected color• IML-Hinge Support S24• 2x IML-Bite Forks S24• Nasion relator with mount

IML-Facebow S24

IML-Facebow S24 (Version I) with IML-Hinge Support S24 (Version I)


IML-Facebow S24

IML-Hinge Support S24 (Version A) colourless / blue Item No. 31010-100 250,00 €

IML-Hinge Support S24 (Version S) colourless / gold Item No. 31030-100 250,00 €

IML-Hinge Support S24 (Version I) colourless / grey Item No. 31010-110 250,00 €

• The IML-Hinge Support S24 has the perfect combination of free movement in opened situation and stiffness in locked situation

• The desired grade of lock is set by turning the locking handle• Fully compatible with the IML-Facebow S24 and with the

IML-Bite Fork S24 through adapters

Scope Of Delivery:• IML-Hinge Support S24 in selected color• 2x IML-Bite Forks S24

IML-Hinge Support S24

IML-Bite Fork Set S24 Item No. 31000-100 27,75 €

• 2x Bite Forks in a Set • Made out of high-strength aluminium to increase the

stability and stiffness

Scope Of Delivery:• 2x IML-Bite Forks S24

IML-Bite Fork Set S24

IML-Hinge Support S24 (Version I)


Accessories IML-Articulators S24

Incisal Pin Set

incl. Pin, Mount and Incisal Needle in the colour red or blue. For Articulators with diffrent construction heights

Incisal Pin Set - 116 mm red Item No. 20200-516 59,00 €

Incisal Pin Set - 116 mm blue Item No. 20100-516 59,00 €


Incisal Pin Set - 118 mm blue Item No. 20100-518 59,00 €

Incisal Pin Set - 121 mm gold Item No. 20300-521 59,00 €



IML-Micro Adjustable Incisal Pin

IML- Micro Adjustable Incisal Pin S24 116 mm red Item No. 25200-116 119,00 €

IML- Micro Adjustable Incisal Pin S24 118 mm red Item No. 25200-118 119,00 €

IML- Micro Adjustable Incisal Pin S24 121 mm gold Item No. 25300-121 119,00 €

IML- Micro Adjustable Incisal Pin S24 126 mm blue Item No. 25100-126 119,00 €

IML-Window Incisal Pin S24

IML- Window Incisal Pin S24 116mm colourless Item No. 20800-116 89,80 €






Individual Laser Inscription

Individual Laser Inscription of the exchangeable cover plate according to your specifications

Individual Laser Inscription of the exchangeable cover plate Item No. 10100-160 9,90 €

Setup Costs according to template Item No. 20100-162 38,50 €

45° Stilt

Stilt in order to work with the model under an angle of 45°. The 45° Stilt can easily be attached to the IML-Articulator S24 through a click system

45° Stilt Item No. 20000-140 20,50 €


IML Mounting Plates

PVC Mounting Plates

Mounting Plates made out of rugged PVC for the easy assembly of the model

PVC Mounting Plates (1 Pair) Item No. 4200-810 5,65 €

Aluminium Mounting Plates

Mounting Plates made out of high-strength aluminium

Aluminium Mounting Plates (1 Pair) Item No. 4200-440 16,80 €

IML Casting System

System to synchronize the operation height.

IML Casting System (1 Pair) Item No. 1612-300 119,50 €

Castingsocket

Enables simple and quick removal and re-fi xing of plaster models

Castingsocket (1 Pair) Item No. 1612-600 149,00 €


Nut plate with rubber ring

Nut plate with rubber ring Item No. 1612-200 89,00 €

Rubber ring for Nut plate Item No. 1612-250 12,00 €

IML-Synchronization Key

For the synchronization of the articulators

IML Synchronization Key Casting System (adjustable) Item No. 1612-100 144,00 €

IML Synchronization Key Casting System 116 mm (rigid) Item No. 1612-116 146,00 €




IML Synchronization Key Castingsocket 116 mm (rigid) Item No. 20900-116 146,00 €




IML Mounting Plates

Innovative Systems For The Dental Technology22

IML-Incisal Disc S24

Incisal Disc for all IML-Articulators S24 in diffrent colors and models

IML-Incisal Disc S24 red (Version A) red Item No. 20100-160 35,80 €

IML-Incisal Disc S24 blue (Version A) blue Item No. 20200-160 35,80 €

IML-Incisal Disc S24 gold (Version S) gold Item No. 20300-160 35,80 €

IML-Micro Adjustable Incisal Disc S24 (Version A) colourless Item No. 20400-160 145,00 €

IML-Incisal Disc S24 red 5° (Version A) red Item No. 20105-160 45,80 €



IML-Incisal Disc S24 blue 5° (Version A) blue Item No. 20205-160 45,80 €



IML-Incisal Disc S24 gold 5° (Version S) gold Item No. 20305-160 45,80 €



IML-Incisal Plate Insert S24 5° Item No. 20100-052 19,90 €



IML-Incisal Disc Basic Item No. 23000-002 24,90 €




IML-Übertragungssockel S24

IML-Transfer Socket S24 black Item No. 24000-118 149,80 €

IML-Transfer Socket S24 (Version A) black Item No. 24000-126 149,80 €

Uncomplicated fixing of the IML-Hinge Support S24 in the Articulator or the IML-Transfer Table S24.

IML-Transfer Stand S24

IML-Transfer Stand S24 116 mm red Item No. 24110-116 150,00 €

IML-Transfer Stand S24 118 mm red Item No. 24110-118 150,00 €

IML-Transfer Stand S24 121 mm gold Item No. 24310-121 150,00 €

IML-Transfer Stand S24 126 mm blue Item No. 24210-126 150,00 €

Uncomplicated and quick transfer of the IML-Hinge Support S24 into the IML-Articulator S24

IML-Transfer Table S24 red / grey Item No. 24110-218 142,00 €

Transfer of the IML-Hinge Support S24 in correct position into the articulator and safe transport through attachment in the IML Transfer Table S24.

IML-Transfer Table S24


One family, one goal: Long-term partnership and added value for our customers. …

Erich Hunger has always been interested in fi nding the best solutions ever since the foun-dation of the company at the Technology Park of Heidelberg University. What drives him for-ward are his enthusiasm for technology and his desire to develop innovative products and solutions.

Within a few years, this motivation led to the emergence of a growing family business. The wide range of products showcases the full spectrum of what modern technology has to offer. Gradually over time this evolved into a successful long-term concept. It serves to ensure that our shared expertise and a spirit of customer-oriented service remain in our com-pany in the future.

Our current growth strategy is based on these foundations and is being carried into the future with the next generation of our family. And this perspective allows us to face the future with confi dence.

The new corporate building is another sign that we take our mission seriously and that our actions are always driven by a vision of sustain-ability that inspires confi dence in our customers. This allows IML to offer them a secure invest-ment that is essential for a lasting and solid partnership.

We always strive to provide added value to both sides – as evidenced by our long-standing cus-tomer relationships.


… it’s all about the solution, not the discipline – Medical equipment by IML

To ensure that a dental prosthesis fi ts perfect-ly, you must fi rst mount the plaster models of the dental impressions in an articulator, which allows for a precise simulation of temporo-mandibular joint movement. IML has attained a leading position in dental medicine by releasing patented solutions bundled in a well thought out modular system of articulators and

face-bows. The underlying basis: exact CNC production and high-quality materials.Combining the best functionality with maximum ergonomics – based on this motto, IML develops medical technology systems for precise handling proces-ses in research and industry while remain-ing open to all disciplines.

Product Consulting

Contact

We would like to offer you our dental programand send you free samples. For this please con-tact us and we are at your disposal at any time. – „IML - With Passion and Precision“

Phone: +49 6222 6797-0Fax: +49 6222 6797-10Email: [email protected]

When the position must be precise

down to just a few thousandths of

a millimeter, you can count on our

strengths coming into play. And where else could our passion for

precision be more useful for humanity

if not in medical equipment?


Terms and Conditions of Delivery and PaymentIML Instrumenta Mechanik Labor System GmbH

A. General Terms and Conditions (as of January 2019)

§1 Scope

(1) These General Terms and Conditions (hereinafter «GTC») apply to all orders placed by a consumer over the age of 18 or an entrepreneur (hereinafter both referred to as «customer») in the online shop of the «seller» (see § 2) regarding the goods and/or services offered there. They also apply to all contracts concluded on the basis of an enquiry submitted by a customer via the enquiry form or by email or using other tele-communications technology for precision parts.

(2) A consumer is any buyer who concludes the contract for a purpose which is pre-dominantly neither attributable to his commercial nor his independent professional activity (§ 13 BGB - Civil Code).

(3) An entrepreneur is any buyer who concludes the contract as a natural or legal person or as a partnership with legal capacity, for a purpose that is attributable to the exercise of his commercial or self-employed professional activity (§ 14 BGB).

(4) The inclusion of the customer›s own conditions (in particular, conditions of purcha-se) is expressly contradicted, unless otherwise agreed upon in writing.

(5) The deliveries and services offered by the seller are provided exclusively on the basis of these GTC. The GTC, therefore, apply to entrepreneurs within the meaning of § 1 para. 1 also for all future business relations, even if they have not been expressly agreed upon again.

(6) The currently valid GTC can be called up and printed out at any time on the web-site of the seller.

§2 Conclusion of the contract

(1) The contract for all goods and/or services advertised in the online shop comes into effect with:

IML Instrumenta Mechanik Labor System GmbH, Parkstraße 33, 69168 Wiesloch, Tel.: 06222-67970, Email: [email protected], Managing Directors: Erich Hunger, Sebastian Hunger, Register court: District Court Mannheim, Regis-tration number: HRB 701885, Sales tax identification number according to § 27 a Value Added Tax Act: DE 254022201

(2) In the case of a contract for precision parts, which is concluded on the basis of an enquiry by the customer, the seller is:

IML Instrumenta Mechanik Labor Produktion GmbH, Parkstraße 33, 69168 Wiesloch, Tel.: 06222-67970, Email: [email protected], Managing Directors: Erich Hunger, Sebastian Hunger, Register court: District court Mannheim, registration number: HRB 701829, Value added tax identification number according to § 27 a Value Added Tax Act: DE 253689884

(3) The essential characteristics of the goods or services are those found in the respec-tive product description provided by the seller.

(4) All offers in the online shop of the seller represent only a non-binding invitation to the customer to submit a corresponding purchase offer to the seller and not an offer of the seller within the meaning of § 145 BGB.

(5) Customers can submit the offer by using the online order form, which is in the sel-ler›s online shop. In this case, after entering the personal data and clicking on «Send order» in the final step of the ordering process, the customer places a binding order of the products in his/her shopping cart. The submission of the offer by the customer is only possible after the customer has received the General Terms and Conditions for his information and has included them in his offer by clicking on the «Accept General Terms and Conditions» button.

(6) The seller may accept the customer›s offer within 2 (two) days by:

1. Sending an order confirmation to the customer in writing or in text form (email or fax).

2. Delivering the ordered goods to the customer.

3. Asking the customer to pay after placing the order.

With regard to the seller›s period of acceptance, the receipt of the confirmation, the delivery of the ordered goods or the request for payment by the customer shall be decisive in each case. If several of the above-mentioned alternatives apply, the agreement becomes binding at the time the first alternative occurs. If the seller fails to accept the offer of the customer within the aforementioned period, this will be considered a rejection of the offer which means that the customer is no longer bound by the offer.

(7) Any confirmations of receipt or receipt sent automatically or manually after submis-sion of the offer shall not be considered as acceptance of the offer by the seller, but are for information purposes only. A contract is therefore not concluded through them.

(8) If the last day of the period is a Saturday, a Sunday or a public holiday at the sel-ler›s registered office, then such day shall be replaced by the next working day.

(9) Since most of the correspondence and order processing takes place via email, the customer must ensure that the email address provided by him is correct and emails can be received.

(10) Enquiries about precision parts by the customer do not constitute offers. An offer only enters into force after the seller replies. The customer can accept this offer within a reasonable period of time. § 2 VII shall apply accordingly.

§ 3 Right of revocation

(1) The customer bears the direct costs for the return of the goods(s) according to § 357 VI BGB (right of revocation).

(2) For other instructions on the right of withdrawal, which is part of these GTC, see the website of the seller.

§ 4. Price

(1) The prices quoted by the seller in the online shop are net prices. The sales tax is shown separately as soon as the product is placed in the shopping basket. Delivery and shipping costs are indicated separately in the respective product description and can be added by the customer to the price calculation of the shopping basket with the help of a computer.

(2) For deliveries to countries outside the European Union, additional costs may incur in individual cases, for which the seller is not responsible, and these are to be borne by the customer. This includes, for example, costs for transferring money through cre-dit institutions (e.g. bank charges, exchange fees) or legal import duties or taxes (e.g. customs duties).

§5 Payment terms and default

(1) The customer has various payment options at his disposal. These are: Prepayment - payment by credit card - payment on invoice - PayPal

(2) For orders that are not placed from the territory of the Federal Republic of Germa-ny, there is only the option of prepayment or by credit card.

(3) The seller reserves the right only to accept certain payment methods for individual products. These are derived from the payment methods listed under «Select payment method».

(4) If prepayment has been agreed upon, payment is due immediately after conclusion of the contract. It must be made in full to the seller›s account within 14 (fourteen) days at the latest.

(5) By choosing the payment method delivery against invoice, the purchase price will be due after the goods have been delivered and invoiced. In this case, the purchase price is to be paid either (a) within 8 (eight) days after receipt of the invoice with 2% discount or (b) within 20 (twenty) days after receipt of the invoice without deduction. This will be valid unless otherwise agreed upon. The seller reserves the right of a check of creditworthiness when selecting the payment method delivery on invoice and to refuse this payment method in case of a negative outcome after checking credit-worthiness.

(6) If the customer is a consumer and is in default with a payment, he is obliged to pay additional statutory default interest in the amount of 5 percentage points above the base interest rate (§ 288 I BGB).

(7) If the customer is an entrepreneur and is in default with a payment, he is obliged to pay the additional statutory default interest of 9 percentage points above the base interest rate (§ 288 II BGB).

§ 6 Delivery and shipping conditions

(1) The delivery of goods is made to the delivery address provided by the customer. The order will be processed based on the address provided during the checkout process. Alternatively, if customers pay via PayPal, the delivery address set up with PayPal will be used.

(5) If the transport company sends the goods back to the seller because delivery to the customer was not possible, the customer shall bear the cost of the failed delivery. This does not apply:

- If the customer exercises his right of revocation upon delivery,

- if he is not responsible for the fact that delivery was impossible or

- if he was temporarily prevented from accepting the service offered, unless the seller had notified him of the service a reasonable time in advance.

(3) The risk of accidental loss and accidental deterioration of the sold goods shall pass to the customer upon handing over of the goods to the customer or to an authorised recipient.

(4) If the customer is an entrepreneur, the risk of accidental loss and accidental dete-rioration in case of sales shipment passes on to the respective forwarder with handing over the goods at the main office of the seller. Likewise, the risk of accidental loss and accidental deterioration shall pass to the customer acting as entrepreneur if dispatch is delayed at his request. The time of transfer of risk shall then be deemed to be the time from which the seller has reported the readiness for delivery.

(5) The seller reserves the right to withdraw from the contract in the case of incorrect or improper self-supply. This applies only when the seller is not responsible for the failed delivery and has completed a concrete cover transaction with the supplier with due diligence. The seller shall take all reasonable measures to procure the goods. In case of non-availability or only partial availability of the goods, the customer will be notified immediately, and any consideration shall be refunded straight away.

(6) For logistical reasons, deliveries may not be collected by the customer.


§ 7 Reservation of ownership

(1) The seller retains ownership to the delivered item until full payment of all claims arising from the purchase contract.

(2) As long as ownership has not yet passed over, the customer is obliged to treat the object of purchase with care.

(3) If the customer is an entrepreneur within the meaning of § 1 III of these GTC, he is entitled to resell the reserved goods during the normal course of business. The custo-mer assigns the claims against the purchaser from the resale of the reserved goods to the purchaser up to the amount of the purchase price agreed upon with the seller (including value added tax). The customer remains entitled to collect the receivables even after this assignment. The seller will not collect the claim from the resale of the purchased item as long as the customer does not meet his payment obligations and, in particular, as long as no application for the opening of insolvency proceedings has been filed or payments have not been suspended.

§ 8 Defects liability and warranty

(1) The statutory liability for defects (§§ 433 ff. BGB) shall apply in principle.

(2) If the customer acts as an entrepreneur, the statutory provisions shall apply with the following modifications:

- Only the seller›s information and the manufacturer›s descriptions are bin-ding for the desired quality of the goods or service. Public promotions or advertising are expressly excluded.

- The customer is obliged to examine the goods immediately after receipt with the necessary care for possible errors or defects and to notify the seller of obvi-ous defects within 7 (seven) days after receiving the goods. Timely dispatch is suf-ficient for meeting the deadline. This also applies to subsequently discovered defects hidden after being discovered. The assertion of warranty claims is excluded in the case of infringement of duty to examine and to notify about defects (§ 377 HGB - Commer-cial Code).

- If the goods are repaired, the seller does not have to bear the increased costs incurred by the goods being taken to a place other than the place of fulfillment, unless the goods are used as intended.

- The warranty period is one year following receipt of the goods. This does not apply in cases of injury to life, body or health, in the event of intentional or grossly negligent breach of duty by the purchaser and in the event of fraudulent concealment of a defect.

§ 9 Liability

(1) The seller is only liable for damages incurred if they are due to a breach of a subs-tantial contractual obligation or to intentional or grossly negligent conduct on the part of the seller, his legal representatives or vicarious agents.

(2) If an essential contractual obligation is slightly negligently violated, the liability of the seller is limited to the foreseeable damage typical for the contract. An essential contractual obligation is performed for commitments whose fulfilment makes the proper execution of the contract possible or on whose observance the customer has relied or was entitled to rely.

(3) Any further liability for damages is excluded. Liability for culpable injury to life, body or health in accordance with the statutory provisions remains unaffected. This also applies to mandatory liability under the Product Liability Act.

§ 10 Concluding provisions

(1) The law of the Federal Republic of Germany applies to all legal relations between the buyer and the seller excluding all conflict-of-law provisions and international con-tracts (in particular, CISG). For consumers, this choice of law shall apply only insofar as the protection provided is revoked by mandatory provisions of the law of the state in which the consumer has his habitual residence.

(2) If the customer is a merchant, a legal entity under public law or special public fund, the exclusive jurisdiction for any disputes arising under this contract shall be the regis-tered office of the seller. The same applies to customers who have their registered office outside the territory of the Federal Republic of Germany if the contract or claims arising from the contract can be attributed to the professional or commercial activity of the customer. However, in the above cases, the seller is entitled to bring the matter before the court holding jurisdiction over the customer›s registered office.

(3) The language of the contract is German.

(4) These GTC are also available in German. The English translation is for information purposes only and is not legally binding. In the event of discrepancies between the German and English versions, the German version shall apply.

B. Customer information§ 1 Information regarding the identity of the seller

IML Instrumenta Mechanik Labor System GmbH, Parkstraße 33, 69168 Wiesloch, Tel.: 06222-67970, Email: [email protected], Managing Directors: Erich Hunger, Sebastian Hunger,

Register court: District Court Mannheim, registration number: HRB 701885, VAT ID number pursuant to § 27 a of the Value Added Tax Act: DE 254022201

and

IML Instrumenta Mechanik Labor Produktion GmbH,

Parkstraße 33, 69168 Wiesloch, Tel.: 06222-67970, Email: [email protected],

Managing Directors: Erich Hunger, Sebastian Hunger, Register court: Dis-trict Court Mannheim, registration number: HRB 701829, VAT ID number pursuant to § 27 a of the Value Added Tax Act: DE 253689884,

§ 2 Information regarding the conclusion of the contract

The conclusion of the contract is in accordance with § 2, conclusion of the general terms and conditions of the seller (see above).

§ 3 Information regarding payment and delivery

Payment shall be made in accordance with § 5 Payment terms and default, delivery in accordance with § 6 Delivery and shipping conditions of the seller›s General Terms and Conditions (see above).

§ 4 Information about the technical steps leading to the conclusion of the contract

(1) The customer has to go through the following technical steps for the submission of his offer via the online order form of the seller:

1. Placing the product in the shopping cart

2. Entering the billing and shipping addresses

3. Selecting the desired shipping method

4. Selecting the desired payment method

5. Summary of the order data

6. Sending the order

(2) Acceptance by the seller shall be in accordance with §§ 2 VI ff. of the General Terms and Conditions of the Seller (see above).

(3) When submitting an enquiry regarding precision parts via the online form or by email or other telecommunication technology, the contract is concluded in accordance with § 2 X of the General Terms and Conditions of the seller (see above).

§ 5 Information regarding the storage of the contract text

The contract text will be saved by the seller and sent to the customer after submitting his order, together with the given General Terms and Conditions and customer infor-mation in text form (e.g. as a letter, email). However, the contract text may no longer be accessible to customers on the seller›s website once the order has been shipped.

§ 6 Information about the technical means to identify and correct the input errors

Before a binding order is submitted, customers can correct their entries using the standard keyboard and mouse functions. In addition, all entries will be displayed once again in a «Review order» screen so that the customer may correct them using stan-dard keyboard and mouse functions before submission.

§ 7 Information on the language available for concluding the contract.

Both the English and German languages are available for concluding the contract. Unless otherwise agreed upon, the language of the contract shall be the language in which the customer›s offer is made.

27

ww

w.b

erea

dy.

onlin

e

With passion and precisionManufactured by IML - Germany

IML – Instrumenta Mechanik Labor System GmbHParkstraße 3369168 WieslochGermany

Phone: +49 6222 6797-0 Fax: +49 6222 6797-10 E-Mail: [email protected] Web: www.iml-service.com

Price List - IML › Wood testing systems, articulators ...€¦ · The new developed...

Documents

Transcript of Price List - IML › Wood testing systems, articulators ...€¦ · The new developed...