Price List for Lab Equipment

8/8/2019 Price List for Lab Equipment

1/77

INDIAN SCIENTIFIC INSTRUMENTS CO.

USE ALWAYS ISIC BRAND EQUIPMENTSMARKETED BYINDIAN SCIENTIFIC INSTRUMENTS CORPORATION Page 1

A1/345 GALI NO-15,SOM BAZAR SOUTH GAMRI EXTENSION DELHI-110053

Ph.: 0999975526,09313046116, vist us: www.isicindia.com , www.isicindia.net e-mail: [email protected],[email protected]\

A1/345 GALI NO-15,SOM BAZAR SOUTH GAMRI EXTENSION DELHI-110053Ph.: 0999975526,09313046116

vist us: www.isicindia.com , www.isicindia.net e-mail: [email protected],[email protected]

PRICE LIST FOR LAB EQUIPEMENT & CATALOUGE

LABORATORY EQUI PMENT

ISIC-101 Autoclave Vertical

Based on the principal of saturated steam sterilization. Electrically heated. Used

for sterilization of rubber, utensils, Linen, plastic, dressing material, surgical

items, glassware, lab wares etc. It is used in scientific research institutions,universities, hospitals, mushroom centers, tissue culture labs etc. Sturdy

construction, Double walled, Inner chamber Le. boiler made of 16 SWG stainless

steel of 304 quality, outer shell is made of thick mild steel duly painted. The boiler

and outer shell is provided with air insulation. Lid is made of thick mild steel duly

Stainless steel lined and is tightened by Radial locking system. Lid is mounted on a central screw and is

provided with best quality joint less neoprene gasket to avoid any risk and trouble free operation. These

autoclaves are fitted with paddle lifting device to open/close the lid. Fitted with glass indicator to indicate the

water level inside the boiler. These autoclaves are fitted with pressure gauge, steam release cock, safety

valves, spring loaded safety valves etc. These autoclaves can be set at any pressure in between 5 to 22

P.s.L Provided with drain valve. These autoclaves are hydraulically tested up to 40 P.s.LProvided with ISI

mark heating elements which are easily replaceable and heat the water to desired temperature and

pressure. Pressure is indicated by pressure gauge. Supplied complete with stainless steel perforated basket,

cord plug to work on 220 V +/- 9% 50 Hz, single phase.

Size (Dia X Depth) Electric Load Capacity Outer M.S. Outer & Inn er S.S

250mm X 450mm (1.5 KW) 22 Ltrs. 37,500/- 41,400/-

300mm X 500mm (2KW) 40 Ltrs. 43,700/- 50,600/-

350mm X 550mm (3KW) 50 Ltrs. 50,600/- 59,800/-

400mm X 600mm (4KW) 78 Ltrs. 55,200/- 74,800/-

450mm X 600mm (4KW) 98 Ltrs. 64,400/- 89,700/-

550mm X 750mm (5KW) 152Ltrs 86,500/- 1,12,700/-


2/77





ISIC-102 Autoclave Vertical High P ressure (Triple Walled)

(For Dry Sterilization)

Most useful for sterilizing the loaded material under a steam pressure of 5 to

20 p.s.L (adjustable with pressure control switch). It has inner chamber,

steam jacket and outer wall made of S.S. duly argon are welded. The space

between outer wall and steam jacket is filled with high grade glass wool to

minimize the temperature loss. All sterilizers are hydraulically tested up to

40p.s.i. The lid is made of thick Stainless Steel and closed by wing radial type closing arrangement. Fitted

with a gasket made up of neoprene rubber, safety valve, water level indicator, steam release valve,

pressure gauge and S.S. basket. Supplied complete with cord and plug to work on 220 / 23Q-volts A.C.

supply. Fitted with vacuum breaker as a safety device

Diaz Height Load S.S Outer/ S.S.Lid

300x500mm 4.00KW 97,800/-

350x550mm 4.00KW 1,20,800/-

450x600mm 6.00KW 1,48,500/-

550x750mm 6.00KW 1,89,800/-

Optional Accessories

Automatic Pressure Control Switch is provided for controlling the pressure automatically on

Preset pressure value.

PRICE *************************************************** 5200/ -

Digital Temperature indicator

PRICE ************************************************ 3900/ -

Timer 0-60 min.

PRICE ************************************************ 3200/ -

Automatic low water level cut off device

PRICE ******************************************** 4500/-

Neoprene Gasket

Di a 250mm 300mm 350mm 400mm 450mm 500mm


3/77





PRICE 550/ - 600/ - 700/ - 800/ - 1050/ - 1300/ -

ISIC-103 Autoclave Horizontal (Triple W alled) (Cylindrical)

Triple walled construction inner chamber is made of high grade stainless steel sheet of

SS-304 grade. The outer body is also made of thick stainless steel sheet. The boiler is

made of S. Steel. The lid is made of thick steel sheet plate. The unit is duly fitted with

highly efficient M.S. Painted Ring & radial locking system duly chrome plated. A three

way valve or a multi port Valve made of stainless steel is installed for controlling the

sterilization cycle. The pressure is adjustable from 5 psi to 20 psi, pressure is controlled by automatic

pressure control switch.Fitted with water level indicator and vacuum breaker. The unit is fitted with

temperature gauge, vacuum breaker and steam trap. The whole unit is mounted on a robust tubular stand

made of MS duly painted with attractive stove enamel.

ISIC-104 Steam Sterilizer Rectangular High Pressure

Same as cylindrical high pressure steam sterilizer but in rectangular shape.

Outside made of Heavy Duty rolled Steel/stainless steel, inside made of thick

Stainless Steel, triple walled. Door made of Thick Stainless Steel. Properly

insulated Steam Generator is made of Heavy duty Stainless Steel. Pressure

control device is fitted in all electrically operated steam sterilizer. Provided with

"Piezostat" (Pressure Control Device). It cut off the power supply to heaters

when the set pressure is achieved and re-energies the heating elements when

pressure falls below the set point.

Boiler is made from thick stainless steel sheet suitable located under the sterilizer. High grade flanged type

heating Elements are placed in the form side for easy replacement etc. Fitted with water gauge made of

glass for water level, safety valve, water inlet and drain valves. Provided with self locking safety door which

cannot be opened when the chamber is under pressure. The clutch mechanism automatically disengages the

threads of the radial locking system for precluding any eventuality of accident when the chamber is under

pressure. A heat resistant neoprene rubber gasket is provided for totally safety of the Instrument. Provided

with electrically operated PIEZOSTAT, which economics the power consumption and limits the use of release

Diaz Height Load PRI CE

400 x 600 mm(16X24) 9KV 2,41500/-

400 x 1100 mm(16X44) 12 KV 2,76000/-

500 x 900 mm (20X36) 9KV 2,64500/-

500 x 1200 mm (20X48) 12KV 3,68000/-


4/77





valve which would frequently blow steam into the room. It cuts off the power supply to heaters when the set

pressure is achieved and re-energizes the heater when pressure falls down. Two separate valves are

provided for evacuating air and steam from inner chamber and jacket .A steam trap is fitted in the chamber

discharge line to eliminate the condensate .Automatically. Panel consist of pressure control switch, main

on/off switch, Indicators, relays etc.The sterilizer is provided with triple safety. First with pressure control

switch, Two nos. spring loaded safety valves, and a dead weight safety valve. A PLUG SCREEN prevents the

discharge line from choking. And it can easily be removed for cleaning. A power full ejector circulates the air

throughout the chamber.

Operating Temperature and Pressure:

121 ac., 1.2 to 2 kegs. cm.

Load: 6.0 to 18.0 KW

WxH xD (MM ) Capacity Liter S.S. 304 S.S. 316 S.S. Carriage M.S. Trolle y

450x450x900 180 4,25,500/- 4,71,500/- 34,000/- 15000/-450x600x900 240 4,48,500/- 4,88,500/- 36,200/- 17300/-

600x600x900 320 4,85,300/- 5,17,500/- 42,200/- 18400/-

600x600x1200 430 5,17,500/- 5,16,500/- 45,800/- 19500/-

600x750x1200 540 6,03,500/- 7,47,500/- 55,200/- 23000/-

600x900x1500 810 6,78,500/- 8,05,000/- 59,800/- 24200/-

ISIC-105 Autoclave Portable

Autoclave vertical type electrically / gas heated with air release nozzle with gasket, lid, safety valve,

pressure gauge, tripod stand, stainless steel inner basket, steam release cock etc.

Size (Dia x Depth) MADE OF ALLUMI NIUM MADE OF S.S.

300 mm x 300 mm 7350/- 9100/- 300 mm x 375 mm 7900/- 9700/-

ISI C-106 Glass Bead Sterilizer

For use in Biotechnology/Tissue Culture research and production. These are compact

Stainless Steel units, and can be placed on Laminar Air Flow Benches. Glass Bead

Sterilizers are a quick, Easy and Accurate alternative to traditional methods of

sterilization. It destruct all micro organism within seconds. The unit is ready within 30

minutes after switching on and ensure total sterilization.Jhese are incorporated with an

imported thermostat, which maintains the set temperature with an. accuracy of 1 of the

preset temperature range


5/77





PRICE*********************************************12100/-

ISI C-107 Oven Universal (Elem ents On Three Sides)Temp. UPTO 250C

Double walled, inner made of thick stainless steel/Aluminum, outer made of heavy

duty M. Steel duly powder coated. Insulation between inner and outer wall is done

with 75mm thick glass wool to prevent any heat loss. Provided with double walled

door with inner made of thick stainless steel and outer is made of M. Steel duly

powder coated painted. Door is provided with best quality handle, gasket etc. Inner

chamber is provided with 2/3 nos. perforated stainless steel/Aluminum. Temp.

range is from ambient to 250aC and is controlled by thermostat and is indicated by

"L" shape thermometer. Heating is done with ISI mark heating elements made from ni-chrome heating wire

placed in porcelain cups in bottom as well as in sides to maintain the uniformity of the temp.

Size Inside Chamber Aluminum

Thermostat

Aluminum Digital S.S. Thermostat S.S. Digital

300x300x300 8700/- 13600/- 11000/- 16100/-

355x355x355 9800/- 15500/- 13600/- 17850/-

455x455x455 14500/- 19000/- 18200/- 20700/-

455x455x605 13300/- 22000/- 20700/- 28800/-

605x605x605 20700/- 25900/- 29900/- 40000/-

605x455x910 27600/- 32200/- 32200/- 45500/-

605x605x910

36800/- 42000/- 43700/- 55200/-


Air circulating fan *************************************** 2100/- Microprocessor PID Control ******************************** 8300/ -

Cabinet Size 150 x 155 x 225 mm (L x W x H)

Crucible (Brass) size 2"dia x 6" Depth

Preset Temp. Range 50 oC - 300 oC

Initial Stabilization Time 30 Minutes

Power consumption 50 Units (for 25 working days)

Wattage 250W Single Phase

Input 220V 50 Hz. Or 11 OV 50 Hz.


6/77





Digital timer ******************************************* 5200/ -

ISIC-108 Industrial Drying Oven / Tray Dryer

Double walled, mounted on sturdy angle iron frame. Inner made of thick G.I.! PCRC

Sheet duly painted with high temperature aluminum paint, outer made of heavy

duty PCRC duly primer coated and enamel painted. Insulation between inner and

outer wall is done with 75mm thick glass wool to prevent any heat loss. Provided

with double walled door with a system to prevent its opening. Door is provided with

best quality handle, gasket etc. Provided with brackets to support the heavily laden

trays at different heights. Temp. range is from ambient to 250C with an accuracy of :t 3C or as desired by

you and is controlled by digital temperature indicator cum controller with PT-1 00 sensor. Heating is done

with ISI mark heating elements made from ni-chrome heating wire placed in the sides 01 the chamber. V

belt driven motor operated blower system in the side of the chamber to maintain the uniformity 01 the

temp. throughout the chamber. Works on 220V 50HZ single phase A.C. provided with exhaust shaft on the

top of the body

TRAY CAPACITY LOAD S.S. Chamber & ALUMINIUM TRAY

8 TRAYS 5 KW 80500/-

12 TRAYS 8 KW 92000/-

24 TRAYS 10KW 147200/-

48 TRAYS 12 KW 258800/-

96 TRAYS 22 KW 396800/-

ISIC-109 Vacuum Oven

These are double walled units with outer made of M.S. sheet duly powder painted and

inner made of heavy gauge S. Sheet. Gap between the two walls is duly filled with high

grade glass wool to avoid thermal loss. Temperature range from ambient to 150C is

controlled by Digital Temperature Controller with an accuracy of 1C. It is capable of with

standing a high vacuum. Provided with vacuum gauge, see through transparent window

of toughened glass and one shelf. To work on 220/230 Volts A.C. supply.

Inside Size (Diaxdepth)

Round : 200 x 250 m.m. (8"x10") ********************************** 30,000/- Round : 250 x 300 m.m. (10"x12") ********************************* 34,500/- Round : 300 x 300 m.m. (12"x12") ********************************* 38,500/-


Microprocessor PID Control **************************************** 8300/ -


7/77


8/77





the top.

Size inside chamber (Width x Depth x Height) S.Steel

355 mm x 355 mm x 355 mm *************************************41400/- 455 mm x 455 mm x 455 mm *************************************55800/- 455 mm x 455 mm x 605 mm *************************************67300/- 605 mm x 605 mm x 605 mm *************************************86300/-


Microprocessor PID Control ***************************************8300/- Digital timer **************************************************5200/-

ISIC-112 Hybridization Oven 'Incubator

Double walled Inside chamber made of Stainless Steel, outer made of M.S. Sheet duly

powder coated. Temperature Range 5C above ambient to 90C controlled by PID

digital temperature controller with an accuracy of:!: 0.5C. Provided with a carrier to

hold 6 nos. of bottles with size 60mm dia x 200mm depth and it rotates at speed of 2

to 16 rpm. Provided with Air circulation fan to ensures temperature uniformity Rotor

can. Provided with glass window in the door to inspect the chamber. Works on 20/230

Volts AC.

PRICE **************************************************************** 94300/ -

----------------- Do -----------------------but temp: range from-5 C to 90C

PRICE *************************************************************** 189800/ -

ISIC-113 Muffle Furnace Rectangular

Useful for hardening, annealing, reheating etc., Outer made of double walled thick

PCRC Sheet duly powder coated painted insulation with high temperature ceramic fiber

wool. Heating elements made of Kanthal wire in coil form wrapped on the muffle,

embedded in high grade refractory cement and backed by HIGH DENSITY CERAMIC

FIBRE BLANKET, which avoids loss of heat. The temperature is controlled by digital

Temperature indicator cum controller. For the models of Maximum temperature of 1000C, the working

temperature is 900'C and for higher temperature models, the maximum temperature is 1200'C and theworking temperature is 1100C

Muffle Size (WxHxD) Working Temp: 900 C Working Temp: 1100 C

100x100x225mm 22500/- 32200/- 125x125x250mm 25300/- 39100/- 150x150x300mm 27600/- 42500/-


9/77





200x200x300 mm 38000/- 65500/- 175x175x475mm 43700/- 73000/-

ISI C-114 B.O.D.Incubators (Lo w Temp.)

Double walled, inner made of Stainless Steel 304 quality, outer made of thick best

quality Mild Steel the surface of which is primer coated for anti rusting and is duly

white stove powder coated paint. Insulation between inner and outer wall is done

with 75mm thick glass wool to prevent any heat loss. Inner chamber is provided

with 2/3 nos. perforated stainless steel shelves with ribs to adjust the shelves at

desirable height. Provided with double door, inner made of thick transparent full

view glass and outer door is double walled metallic properly insulated with glass wool and also provided with

best quality handle, gasket, lock etc. Provided with door operated illumination lamp. Whole unit is mounted

on castor wheels. Temp. Range is from 5C to 60C and is controlled by electronically controlled by Digital

temperature Indicator cum Controller with PT-1 00 sensor. This controller is provided with time delay relay

to control the accuracy in maintaining the temperature. Temp. is maintained with an accuracy of:!: 0.5C~

Cooling is done with ISI Mark compressor of KIRLOSKAR make which is connected to thick copper coils

placed in the rear of the chamber through condenser, fan motor, capacitor, relay etc. Whole cooling unit is

placed below the main chamber in a GI housing. CFC Free, Environment friendly. _Heating is done with ISI

mark strip type heaters placed near the cooling coils. Air is circulated by 2-nos. ISI mark Silicon banded

motors, which are connected to balanced blowers, which operates alternatively and continuously with

heating and cooling. Provided with On/Off switch, Indicators, Digital Controllers etc.

The follow ing optional arrangements can be made in each model of BOD Incubator.

1. BOD Incubator with interior illumination with 3 number fluorescent tubes of 60 mm length placed vertically

along the back wall. Minimum temperature can be obtained from 10C to 50C when all the tubes are on at

the extra.

PRICE ******************************************************** 3500/ -

Size inside chamber (W xD x H) Capacity VOLUME S. Steel

455mm x 410mm x 610mm 4.0 Cu.ft 117 liter 78,500/-

505mm x 515mm x 830mm 6.1 Cu.ft 171 liter 85,000/-

570 mm x 550 mm x 875 mm 10 CU.ft 280 liter 92,000/-

650mm x 580mm x 900mm 12 Cu.ft 336 liter 96,600/-

700 mm x 650 mm x 900 mm 15 CU.ft 420 liter 1,12,700/-


10/77





2. BOD incubator incorporated with timer 0-24 hours for regulating cyclic illumination condition at extra cost.

PRICE ******************************************************** 3200/ -

3. Microprocessor based Programmable Timer

PRICE ********************************************************* 7500/ -

4. Humidity control from ambient to 90% by Humidistat at extra cost

PRICE ************************************************************ 12000/-

5. Digital humidity indicator cum controller

PRICE ********************************************************* 9200/ -

6. Shaking machine can be fitted inside the BOD with variable speed by regulator

PRICE ******************************************************** 30000/ -

7. Voltage Stabilizer 2 KVA at extra cost

PRICE ********************************************************** 5300/ -

8. Micro Processor based P.I.D. controller can be provided instead of Electronic Digital Temperature indicator-

cum-controller

PRICE ********************************************************** 8800/ -9. Micro Processor programmable controller for nine control & nine step

PRICE ********************************************************* 20700/ -

10. Automatic Voltage Stabilizer 3.0 KVA. (TRIPLE RELAY).

PRICE ********************************************************** 6900/ -

ISIC-115 Bacteriological Orbital Shaking In cubator

Body made of thick Stainless sheet 304 quality. Top lid is made of transparent see

through plexus glass. Variable speed rotary shaker platform is fitted with imported

DC driven motor for continuous operation. Unit is also fitted with digital RPMI

Speed indicator. Shaking platform can accommodate 16 flask of 250 1500ml or 25

flask or 100ml or 36 flask of 50ml provided at the base of incubator so as to shake

Erlenmeyer flasks. Variable speed motor is fitted outside of the inner chamber at

the base. Complete unit is mounted on a sturdy angle iron frame. Temperature

range from ambient to 70C is controlled by Digital Temperature Indicator cum controller with an accuracy

of 0.5C. Provided fitted with air circulation fan for temperature uniformity. Work in 220 I 230 v. AC supply

Price ******************************************************* 89700/-

----------------- Do -----------------------but temp: range from-5 C to 70C

PRICE ******************************************************** 170200/ -

ISIC-116 Humidity & Temperature Control Cabinet

Double walled, inner made of Stainless Steel, outer made of thick best quality

Mild Steel, the surface of which is powder coated. Insulation between inner and

outer wall is done with 75mm thick glass wool to prevent any heat loss. Inner

chamber is provided with 3 nos. perforated Stainless Steel shelves with ribs to

adjust the shelves at desirable height. Provided with double door, inner made of


11/77





thick transparent full view glass and outer door is double walled metallic properly insulated with glass wool

and also provided with best quality handle, gasket etc. Whole unit is mounted on castor wheels.

Temperature range is from ambient to 60C and is controlled by Digital temperature Indicator Cum

Controller with PT-100 sensor. This controller is provided with time delay relay to control the accuracy in

maintaining the temperature. Temp. is maintained with an accuracy of +/1 C. Heating is done with ISI

mark strip type heaters placed around the inner chamber. Air is circulated by 1 no. .ISI mark Silicon winded

motors which are connected to balanced blowers. Humidity will be maintained up to 95% with an accuracy

of +1- 3% and humidity is generated by imported mist Generator and is controlled with the help of

Imported Humidistat and is indicated by Round Hygrometer. Humidity is generated through a water

reservoir placed in the lower side portion of the chamber. Provided with On/Off switch, Indicators, Digital

Controllers etc.

Size (W x D x H) i nside chamber S. Steel

455mm x 455mm x 710mm ****************************** 58700/ -

605 mm x 605 mm x 605 mm **************************** 69000/-

605 mm x 605 mm x 91 0 mm *************************** 85000/ - ----------------DO-------------- same as Above chamber with temperature range 1 O'C to 60'C+2"C Le. with

cooling & heating system & Humidity 55% to 95% + 5%

Size (W x D x H) i nside chamber

455mm x 455mm x 710mm ***************************** 80500/ - 605 mm x 605 mm x 605 mm *************************** 93000/- 605mm x 605mm x 910mm *************************** 110000/ -


Humidity chamber can be supplied with Electronic Digital Indicator cum Humidity controller at an extra cost

Price **************************************************** 8000/ -

PID Controller at extra cost

PRICE ************************************************** 11000/ -

Micro Processor programmable controller for nine control & nine step

PRICE ************************************************** 20700/ -

ISI C-117 Seed Germinator (Single Chamber)

Most suitable for conducting various experiments on a variety of seeds under

different conditions of temperature and humidity. Atmospheric conditions are

created within the chamber to perform different experiments without gone onto

the field. The double walled unit has inner chamber made up of S.S. and outer

chamber of M.S. Sheet duly powder coated. Temperature from 5c to 50c+ 1c is

controlled by DIGITAL TEMP. Indicator-cum-controller. Humidity (NOT

ADJUSTABLE) is created in a S.S. water reservoir fitted at the bottom to provide


12/77





90% to 95%+ 3% RH Humidity. Supplied complete with 14 adjustable perforated trays. Complete with cord

and plug to work on 220/230 V. A.C. Supply.

SIZE INSIDE CHAMBER 555x605x910 mm

PRICE ********************************************** 1, 24,200/ -

ISI C-118 Seed Germinator (Dual Chamber)

Double Walled, inner made of thick Stainless Steel, outer made of thick best quality

mild steel duly powder coated painted, properly insulated with 75mm glass wool to

prevent any heat loss. Provided with full view glass door for inspection of material

in the both chambers. Provided with dual chamber of inner size 555 x 605 x 910

mm (WxDxH) each. Each chamber is provided with 6/14 perforated Stainless steel

trays.(With Standard configuration only 6 trays are provided in each chamber).

Each chamber is provided with Inner full view transparent glass door and outer double walled, metallic door

with best quality handle, leak proof magnetic gasket, lock etc. Whole unit is mounted on castor wheels foreasy mobility. Both the inner chambers are provided with water reservoir (Tank) made of S. Steel and

provided with constant level of water, drainage made of brass is provided. Temp. range is from 5C to 50C

in one chamber and ambient and above in other chamber i.e. one chamber is provided with heating and

cooling system, and other chamber is provided with only heating system. Cooling is done with the help of

ISI mark compressor relay, capacitor etc. Provided with fan cooled condenser. Provided with separate digital

indicator cum controller with PT 100 Sensor in both the chamber. This temp. Controller is provided with

unique facility of time delay relay which automatically controls the accuracy of temp. The resolution of digital

controller is 0.1 DC. Humidity is from ambient to 90% RH (Adjustable) and is controlled by Humidistat with

an accuracy of +/- 3% and Humidity is generated through a S.Steel reservoir placed in the bottom of th~

main chamber and is generated through Imported Mist Generator .Provided with motorized powerful two

number fans in each chamber for uniform air circulation. Each chamber is fitted with separate controls for

heating cooling temp. setting humidity setting, different display of parameters and is provided in the front of

the each chamber. Works on 220 V 50 Hz, Single Phase AC.

PRICE ********************************************* 2, 07,000/ -

--------------------DO------------------------------ same as above but provided heating and cooling system

in the both chambers

PRICE *************************************************** 2, 24,500/ -


1. Spare tray at extra cost

PRICE ******************************************************* 1100/ -

2. Humidity chamber can be supplied with Electronic Digital Indicator cum-Humidity controller at an extra cost

Price **************************************************** 8000/ -


13/77





3. Microprocessor PID Controller at extra cost

PRICE ***************************************************** 11000/ -

4. Seed Germinator can be provided 0-24 hour's timer for regulating cyclic illumination condition at the extra

cost. PRICE *********************************************** 3300/ -

5. Microprocessor based Programmable Timer

PRICE ****************************************************** 7500/ -

6. Automatic Voltage Stabilizer 4.0 KVA. (TRIPLE RELAY).

PRICE ******************************************************* 8000/ -

ISIC-119 Plant Growth Chamber

Double walled, inner made of Stainless Steel 304 quality, outer made of thick

best quality Mild Steel the surface of which is primer coated for anti rusting and

is duly enamel/ powder coated paint. Insulation between inner and outer I wall is

done with 75mm thick glass wool to prevent any heat loss. Inner chamber is

provided with 3 nos. perforated stainless steel shelves with ribs to adjust theshelves at desirable height. Provided with double door, inner made of thick

transparent full view glass and outer door is double walled metallic properly

insulated with glass wool and also provided with best quality handle, gasket, lock etc. Provided with door

operated illumination lamp. Whole unit is mounted on castor wheels. Temp. Range is from 5C to 60C and

temp. can be obtained from 15DC to 50DC f1 DC when all lights from two sides and top are 'ON'.

Temperature is controlled by DUAL electronic digital temp. Controller-cum-indicator to set two temp. for day

and night with PT-1 00 sensor. This controller is provided with time delay relay to control the accuracy in

maintaining the temp.. Temp. is maintained with an accuracy of +/- 0.5C Cooling is done with ISI Mark

compressor of KIRLOSKAR make which is connected to thick copper coils placed in the rear of the chamber

through condenser, fan motor, capacitor, relay etc. Whole cooling unit is placed below the main chamber in

a GI housing. CFC Free, Environment friendly. Heating is done with ISI mark strip type heaters placed near

the cooling coils. Air is circulated by 2-nos. ISI mark Silicon banded motors, which are connected to

balanced blowers, which operates alternatively and continuously with heating and cooling. Provided with

On/Off switch, Indicators, Digital Controllers etc. Exterior Illumination is done with the help of fluorescent

tubes 60 cm. Long of 20wt. each placed vertically in the side wall. Provided with automatic 0-24 hours Timer

with battery backup. Humidity maintained from ambient to 90% with the help of natural Mist Evaporator and

is controlled by humidity controlled by Digital Humidity Controller with an accuracy of 3% RH

WxHxD(MM) SIZE S. STEEL

570x875x550 10 C.F.T. 1,70,200/-

775x900x775 20 C.F.T. 3,22,000/-

825x1200x825 30 C.F.T. 3,91,000/-

900x1820x800 45 C.F.T. 5,17,500/-

ISIC-120 Deep Freezer


14/77





Double walled with inner chamber made of S.S./ Plastic and outer of thick PCRC sheet duly enamel painted.

Temperature range from ambient to -20C is achieved by hermetically sealed compressor. The gap between

the inner and outer wall is filled with high grade PUF Insulation to avoid thermal loss. Body is mounted on a

sturdy angle iron frame and is mounted on castor wheels. Unit is fitted with Micro Processor Digital

Temperature Indicator-cum controller. Horizontal Chest type models are supplied in a single compartment

whereas vertical models are supplied with three storing shelves.

CAPACITY 4 C.F.T. 6 C.F.T. 10 C.F.T. 12 C.F.T.

CHEST TYPE 62100/- 80500/- 1,20,800/- 1,28,800/-

VERTICAL 64400/- 82800/- 1,32,300/- 1,38,000/-


Automatic Voltage Stabilizer4 KVA. (TRIPLE RELAY) ***************************6900/-

ISIC-121 De-Humidifier

(fitted W ith Time Controlled Safety Device, In Case Humidit y Controller Fail s,

For Safety Of The Compressor)

Dehumidifiers are water condensing type. base on "Refrigeration Cycle" to avoid use of

expensive chemicals required for desiccant type models. The unit is self standing and is

mounted on a study angle iron frame, fitted with caster wheels. Dehumidifier excess

moisture from the atmosphere and it fitted with hermetically sealed compressor. Heat

exchanger and water condensing coils are made of S.Steel collection tank is providedbelow the unit to collect condensate water, Humidity is controlled by automatic HUMIDISTAT incorporated in

the unit up to 30% :!: 3% RH, depending upon the ambient conditions. To achieve very low humidity, the

room should have a independent window type Air Conditioner to match with the dehumidifier heat load in

the room. Suitable to work on 220/230 Volts A.C. Supply.

Capacity : 1.5 Tone******************************************69000/ -


Digital Humanity controller cum indicator ****************************11000/- Automatic Voltage Stabilizer4.0 KVA. (TRIPLE RELAY). ******************8000/-

ISIC-122 Lyophilize (Freeze Drier)

It is used for pro-reservation of Blood Plasma, Plants etc. without damaging their Cell

structure, with cooling contender, vacuum drum and pump in steel Cabinet.

3.25 Litre ( Condensate Cap.) (6 Tests) *********2,78,300/- 5.25 Litre (Condensate Cap.) (12 Tests) *********3,16,300/-


15/77





ISIC-123 Blood Bank Refrigerator

Mounted on a study angle frame the inner chamber is made up of S.S. and outer of

M.S. duly enamel painted. The temperature is maintained with 4C to 6C, for storing

blood bottles or blood bags. Temp, is controlled by Solid State Digitallndicator-cum-

controller and triggers the Audio Visual Alarm in the event of fluctuation exceeding

permitted tolerance. Unit is also fitted with door operated alarm and power supply

failure alarm, as a safety device. Drawers are provided for holding bags. To work on

220/230 volts A.C.

Capacity 85 liters (50 Blood Bags) **********************************75000/- Capacity 165 litres (110 Blood Bags) ********************************82000/- Capacity 200 liters (200 Blood Bags) ******************************100000/- Capacity 280 litres (250 Blood Bags) ******************************112700/- Capacity 400 litres (360 Blood Bags) ******************************156400/-


Chart Type Temperature Recorder *********************************36800/- Automatic Voltage Stabilizer 3.0 KVA (TRIPLE RELAY)*******************6200/-

ISIC-124 Mortuary Chamber

Used for storing cadaverous under low temperature cool conditions in order to prevent

decomposition. These units are double walled with outer made of M.S. Sheet duly painted

and inner walls of S.S. Trays made of G.!. Sheet to carry dead bodies are provided withhandles so as to carry dead bodies. Trays travel on rollers fitted with ball \- bearings for

easy movement. Hermetically sealed compressor serves refrigeration unit, to maintain

temperature range of -2 C to 5 C or -15 C to -20 C (as ordered) Unit is fitted with Digital Temperature

Indicator-cum Controller. To work on 220/230 volts A.C. Supply.

CAPACI TY -2C to 5C -15C to -20 C Voltage Stablizer

Single Body 1,95,500/ - 212800/ - (3kva)6200/ -

Two Body 218500/- 322000/- (4kva)8000/ -

Three Body 264500/- 368000/- (5kva)8600/ -

Four Body 362300/- 471500/- (8kva)15000/-

Six Body 494500/- 621000/- (8kva)15000/-


16/77





ISIC-125 Environmental-Cum-Humidity Test Chamber

Heavy duty robust construction with inner chamber made of stainless steel and

outer made of M.S. sheet duly enamel painted. Glass window allows inspection of

samples without disturbing the inner chamber temperature. Four stainless steeladjustable shelves are provided with the unit. Air circulation fan is also fitted to the

unit for temperature uniformity. Temperature range from 10 C to 60 C:!:2 C is

controlled by Dual Setting Digital Temperature Indicator-cum controller and

humidity is controlled by imported humidistat from ambient to 95% :!:3% RH. Arrangement exists only for

increasing the humidity and not for decreasing. Fitted with exterior illumination achieved by fluorescent tube

and 0-24 cyclic timer. To work on 220/230 volts AC supply. Inner chamber.

Size: 1mtrx1mtrx1mtr************************************************ 356500/ -

ISIC-126 Laminar Air Flow Cabinet (Horizontal)

Designed so as to meet the requirements of US Federal Standard 209 B (BS 5295)

providing particle free air to meet class 100 (Class conditions. The cabinets are

fabricated out of thick board duly sun mica clad interior surface are epoxy painted for

its longer life. The work table is made of thick board which is S. Steel clad at top.

Side panels are made out of thick transparent plexi glass duly framed. The unit is

fitted with pre - filter and HEPA Filter. Air is drawn through pre-filter and is made to pass through highly

effective HEPA (High Efficiency Particular Air) filters having efficiency rating as high as 99.99% with cold

DOP and 99.97% with hot DOP, thus retaining all air-borne particles of size 0.3 micron and larger. Using a

dynamic machine, the blower and motor assembly is statically and dynamically balanced ISI MARKED Motor

of 1/5 H.P. capacity operates with minimum noise level. The working area is illuminated by flourescent

lighting fitted to the unit. Height of the working table provides comfortable 'SIT DOWN" working position for

the operator. To work on 220/230 volts A.C. supply. Supplied complete with S. Steel table top, HEPA filters

pre-filter and fluorescent illumination, UV light & Gas Burner.

ISIC-127 Biological Safety Cabinet / Sampling Booth

MODEL LH-22 LH-32 LH-42 LH-62

Working Size 2x2x2 3x2x2 4x2x2 6x2x2

Size Of Hepa Filter 2x2x6 3x2x6 4x2x6 3x2x6

No of Hepa Filter 1 1 1 2Illumination 1x20w 1x20w 2x40w 2x40w

Price For Deluxe Model 55200/- 69000/- 78200/- 99000/-

Complete In S.S. Body 99000/- 112700/- 145000/- 207000/-


17/77


18/77





WORKING SIZE 2x2x2 3x2x2 4x2x2 6x2x2

WOODEN BODY 66700/ - 82800/ - 94300/ - 1,12,700/ -

INNER CHAMBER FRP /S.S. Perfect 18400/ - 23300/ - 28800/ - 34500/ -

Complete In S.S. Body 89700/ - 109300/ - 1,26,500/ - 1,61,000/ -


PVC Fume Duct (per ft.) **************************************************** 900/-

ISI C-129 Air Curtain

An air Curtain is a modern device which, when installed on a door, forms an

invisible curtain of continuous air and thus prevents escape of conditioned air and

entry of outside hot, humid, dirty and unwanted polluted air. The cabinets of Air

Curtain are made of cold rolled Mild Steels. The blowers are made of high quality

aluminum sheets, duly balanced both, statically as well as dynamically on

computerized digital balancing machines, designed to I provide uniform air withminimum noise and no vibration. All units are thoroughly tested at works and

meet the highest standards. The motors used are off continuous rating with sealed ball-bearings. HIGH

VELOCITY MODELS (Approx 10 meters/second).


Door operated limit Switch with door fitting *************************3200/-

ISIC-130 Water Bath R ectangular (Single W alled)

Electrically operated, Water Bath is made of thick Stainless Steel and has constant

level of water. Complete with concentric rings wire plug, etc. Provided with drainage

facility. Concentric rings have the 75 mm dia.

Available in following sizes :

300mmx250 mmx 100 mm (6 holes of 75 mm dia) **************************3900/- 300mmx350 mmx 100 mm (9 holes of 75 mm dia) **************************5100/- 350mmx400 mmx 100 mm (12 holes of 75 mm dia) *************************5600/-

Size Door Width 600 m.m (2 feet) 13800/-

Size Door Width 900 m.m. (3 feet) 16100/-




19/77





ISIC-131 Water Bath Rectangular (Double Walled)

Double Walled, inner made of 304 Stainless Steel, Outer made of Mild Steel duly powder

coated. Top made of Stainless Steel with 75 mm thick holes with concentric rings. Insulation

with thick glass wool to prevent any heat loss. Temperature range from ambient to 99:C

with an accuracy of :t1C. Thermostatically controlled fitted with Neon Lamp, indicator main switch and

workable on 220 V. 50 Hz single phase AC. Provided with drain and port for thermometer.

Inner Chamber made of Stainless Steel and available in followin g sizes

300 mm x 250 mm x 100 mm (6 holes of 75 mm dia) ******************6700/- 300 mm x 350 mm x 100 mm (9 holes of 75 mm dia) ******************7900/- 350 mm x 400 mm x 100 mm (12 holes of 75 mm dia) *****************9400/-


Stirrer with Motor and speed regulator *****************************4500/- Digital Temperature indicator cum controller ************************5600/-

ISIC-132 Water Bath Cylindrical (Double Walled)

Double walled with inner made of Stainless Steel, outer of heavy Mild Steel duly powder coated. Insulation

with thick glass wool. Provided with concentric rings, thermostat controlled. Temperature up to 100C with

an accuracy of 1 oC.

Available in following sizes:

200mmx 150mm ******************************************** 6000/- 250 mm x 250 mm ****************************************** 7500/ -


Digital Temperature indicator cum controller *********************** 5600/ -

ISIC-133 Serological Water Bath

Temperature Range is from ambient to 100C with an accuracy of :t1C. Double

walled, Inner made of Stainless Steel, outer made of heavy duty Mild Steel duly powder

coated. Properly insulated. Heating elements are tubular type, made of Copper duly

Nickel plated. Covered with perforated S.s.tray. Temperature is controlled with

thermostat. Temperature control knob is graduated in degree centigrades. Provided

with On/Off switch, indicator, cord plug, etc. Suitable to work on 220 V single phase 50 Hz AC.


20/77





Size (Dia & Depth)

300mm x 250mm x 175mm for 2 racks 7100/-





STIRRER with 1.20HP Motor and speed regulator *************************** 4300/ - Digital Temperature indicator cum controller ****************************** 5600/ -

ISIC-134 High Precision W ater Bath (With Stirring Arrangement)Double wailed chamber has inner made up of thick S.S. and outer wall is of thick

PCRC sheet duly Powder Coated. A glass window is provided on the front side for

an easy inside view. A high speed stirrer with a motor of 1/20 H.P. is fitted to the

unit for continuous stirring and thus maintaining a uniform temperature

throughout. A speed regulator & digital indicator controller is provided on the front

panel to control speed of the stirrer and temperature of bath. The heating

mechanism comprises of set of heaters pertaining to faster and slower heating Controls the temperature

with a sensitivity of + 0.1 C, from ambient to 100 C. To work on 220/230 volts A.C. supply. Chamber Size:

430 x 240 x 265 m.m. (Approx. 28Ltr. cap.)************************************** 39100/ -


PID Digital Temp. Indicator-cum-Controller *********************************** 8600/ -

ISIC-135 Water Bath I ncubator Shaker (M etabolic Shaking In cubator)

It is a double walled unit with inside made of thick S.S. sheet and outer made of

M.S. Steel duly powder coated prevents falling of condensed water droplets on the

specimens. Heating is achieved through a immersion type heater and the

temperature is controlled by hydraulic type thermostat with an accuracy of:t

0.5C. The bath has an oscillating tray riding on ball rollers oscillated through a

geared variable speed motor. Shaking speed range is between 40 to 140 cycles per

minute. The shaking tray can either hold test tubes or Erlenmeyer flasks of 25 ml or 50 ml or 100 m or250

ml or 1000 ml. as ordered by the users. (Kindly mentioned the capacity of the flasks while ordering).


21/77





Supplied complete with one shaking tray, paramedical cover, L-shaped thermometer cord and plug, to work

on 220/230 volts A.C. supply. Available with heating arrangement only (having temperature range from

ambient to 100C) or with both heating and cooling arrangements

(having temperature range from 5C to 60C).

Inside Size Temp: Ambient to 100 C Temp: 5 C to 60 C with Digital Controller

275x275x150 mm 30500/- 92000/-

405x300x150 mm 33500/- 105800/-


Spare shaking tray or test tube rack for part (a)or(b) ****************** 2550/- Digital Temperature Indicator-cum-Controller ************************ 5600/ - Microprocessor PID Digital Temperature Indicator-cum-Controller ********* 8600/-

Digital R.P.M. Meter ******************************************** 8000/ -

ISIC-136 Oil Bath High Temperature

Double walled with inside made of Heavy S.S. and outside of M.S. sheet duly

powder coated. The gap between the two walls is fitted with high grade glass wool

to minimize thermal loss. Temperature range from ambient to 250C :t 2C, is

controlled by hydraulic capillary type thermostat. A variable speed stirring

arrangement is fitted to the unit for maintaining temperature Plug to work on

220/230 volts A.C. supply.

SIZE CAPACITY PRICE

250x250x250 mm 12 liter 16100/ -

300x300x300 mm 20 liter 18400/ -

355x355x250 mm 26 liter 32200/ -


Digital Temperature Indicator-cum-Controller *************************** 5600/ - Microprocessor PID Digital Temperature Indicator-cum-Controller ************ 8600/ -

ISIC-137 Circulating W ater Bath


22/77





A highly in demand instrument where water is required to be circulated to some external source through an

F.H.P. pump. Most useful for circulating water to Abbe Refract meter, condenser coils etc. Temperature from

ambient to 90C is controlled through hydraulic type thermostat with an accuracy of: t 0.5C. Inner

chamber made of S.S. and outer chamber made of M.S. Sheet duly powder coated. Inside bath size 8" x 9"

x 1 O%" with a cover at side of size: ********10500/-


Digital Temperature Indicator-cum-Controller ****************************** 5600/ - Microprocessor PID Digital Temperature Indicator-cum-Controller ************** 8600/ -

ISIC -138 Refrigerated Circulating Water Bath

Outer body is made of thick mild steel sheet duly powder coated painted and inner

chamber is made up of 304 grade Stainless Steel. Lid is also double walled properly

insulated and is with locking facility. Whole unit is mounted on a sturdy angle iron

frame The cooling coils are brazed to the outer side of S.S. chamber thus ensuring

perfect and uniform cooling. Insulation is done with thick glass wool to prevent any

heat loss. For attaining the temp. below ambient, the refrigeration is done through

CFC FREE hermetically sealed compressor and & for attaining the temp. above ambient, heating is done with

immersion type heating element .Fitted with stirrer for temperature uniformity throughout the chamber.

Temperature range is from 5C to 90C is controlled Digital temp. Indicator cum controller with an accuracy

of: to.3C. To work on 220/230 volts AC supply. The unit is also fitted with a FHP PUMP for circulating the

cooled liquid to an external source such as condenser coils, etc.

SIZE: 500mmX250mmX250mm****************************************** 73600/ -


Microprocessor PID digital temperature indicator-cum-controller ******************* 8600/ -

ISIC-139 Tissue Flotation Bath

Double walled, inside made of Aluminum steel duly black painted and outside made of

Mild Steel Sheet duly power coated Thermostatic control from ambient temp. to 80DC :t

1 DC complete with indicators, cord & plug to work on 220/230V AC. without

thermometer.SIZE: 250mmX125mm********************************** 5300/-

ISI C-140 Rotary vacuum Evaporator (Buch i Type) (Variable Speed)

The apparatus consists of an evaporating flask rotated by sparking induction motor in a


23/77





heating water bath. Vacuum distillation of solvent at high and low temperature is achieved quickly and

efficiently by use of a VARIABLE SPEED motor, which prevents foaming and bumping of the liquid (solvent)

into the evaporating flask and also distillation under controlled atmosphere The evaporating flask is pear

shaped to give a large surface area of evaporation and is clamped to a glass duct which goes through the

drive unit and protrudes about 120 m.m. into the condenser. The condenser is fitted with standard joint at

the top and the bottom for receiver flask. The unit is fitted with a quick action jack. bath & Vacuum Pump:

1 liter Capacity**************************************************** 27600/-


Thermostatic Water Bath ****************************************** 4600/ - Digital Water Bath ********************************************** 11000/- Vacuum Pump ************************************************* 16100/-

Micro attachment set ********************************************* 5500/ - Condenser double coil ******************************************** 4600/ - Rolling Flask ****************************************************** 1150/ -

ISIC-141 Distillation Apparatus All Glass (Electrically Heated)

The assembly consists of a glass flask with embedded heating elements fused in

spiral with type glass coil internally at bottom. A double wall coiled condenser has

standard ground glass joints. Complete with glass fitting, metallic stand, rings

clamps and electrical fittings. The unit supplied is as per NPL patent design. To work

on 220/230volts A.C. supply.


Automatic Low Water level cut off device in case water supply is stopped ********* 3200/ - Special grade Rubber Tubing (10 mtrs oil ********************************* 550/-

ISI C-142 All Glass Distillat ion Unit, With Quartz H eater Tube, Vertical Type

These units consist of main boiler. A built in heater enclosed in Quartz glass tube.

Housing auto Water level adjuster, Bottom outlet for cleaning waste discharge which

is fitted with Teflon screw Cap valve. A coil condenser fitted on top for condensing

Flask Capacity Single Stage Double Stage Triple Stage

3 liter 13800/ - 24200/ - 36800/ -

5 liter 16100/ - 27000/ - 41400/ -

10 liter 22500/ - 39100/ - 58700/ -


24/77





vapors. The whole unit is mounted on epoxy coated metal box stand & covered with acrylic sheet cover for

protection. Power supply unit is in built no extra attachment is required. Housing sturdy & reliable power

System requires 1 K.W. Power per heater.

These distillation units are more compact; require less space, reliable, easy to operate on Continue basis.

Capacity 1 liter/hr 2 liter/hr 3 liter/hr 4 liter/hr 5 liter/hr

Single Stage 55200/ - 67500/ - 78800/ - 92000/ - 112700/-

Double Stage 74800/ - 112700/ - 128800/ - 193200/ - 218500/ -

ISIC-143 Water still (Wall mounting)

The unit is recommended for making progeny free distilled water of a very high

degree of purity. Made out of S.S. special kettle element is fitted with Ejection

Device/Auto Cut for safety of the element is provided water supply is stopped. The

cock fitted to the unit is of brass C.P. A wall Mounting clamp is provided with the

unit. Supplied with cord and plug to work on 220/230 volts A.C.

Capacity Load PRI CE

2 litre/hr. (approx) 2.0 KW 6900/ -

4Iitre/hr.(approx) 3.0 KW 8000/ -


8Iitre/hr.(approx) 6KW 12700/ -

ISIC-144 Water Still(Table Pattern-Barnstead Type) (Made Of Stainless Steel)

Double walled construction with inner and outer chamber made of S.S. the gap in

between being filled with glass wool. The condenser and top are also made of S.S.

the raw water is first made of pass around the tubes in the condenser Where it

gets heated nearly to the boiling point thus economizing the heating energy. The

heated water passes to the evaporator through a water level maintaining pipe.

Excess water is let out through the drain. To work on 220/230 volts A.C. supply.

Capacity Load Price

2 litre/hr.(approx) 2.0 KW 9800/ -





25/77





ISIC-145 Deionizer

Double Bed Deionizer : Treated water confirms to 151 1069/ 64

Unique feature conductivity meter with linear scale operates on AC/DC of 9 volts

battery cell. on Corrosive Regeneration Tank. High capacity action &Anion

exchange resign up flow treatment. Portable metallic stand with wheels. Can

directly be connected to tap water.

Model No. DB 70 DB-100 DB-150 DB-200 DB-300 DB-500

Output/hr 70 100 150 200 300 500

Prices 20500/- 24400/- 29900/- 35500/- 47200/- 61000/-

Four Bed Deionizer: It consists of4 beds i.e. pre-filter, Activated Carbon Action, Anion Column.

Consists of : Inbuilt prefix, Action and Anion Resin Columns, Conductivity meter operators on AC/DC (9V

Battery Cell). Deionizer water will have conductivity of less than 1 Oms/cm and PH of7.5 to 8.5

Model No. FB 70 FB-100 FB-150 FB-200 FB-300 FB-500

Output/hr 70 100 150 200 300 500

Prices 25200/ - 32000/ - 42600/ - 50900/ - 60000/ - 76500/ -Mixed Bed De-Mineralize : Confirm to.IS11 00/ 60 :

This mixed bed demoralizer is used as polishing unit with double or four bed demineralizer.

Model No. MB 70 MB-100 MB-150 MB-200 MB-300 MB-500

Output/hr 70 100 150 200 300 500

Prices 23600/ - 32200/ - 42000/ - 47200/ - 55800/ - 72500/ -

ISI C-146 Rotary Flas k Shaker (Heavy Duty)

Mainly use for mixing of chemicals, solvents / solutions and are most suitable for

shaking in Erlenmeyer flasks. Body is mounted on heavy duty M.S. angle iron

frame duly painted. The platform is made of thick mild steel sheet duly painted

fitted with rubber discs to hold Erlenmeyer Flasks of different capacity. Platform is

mounted on ball bearing crank shafts with a orbital dia. of approx. 1.5" to 2".

Heavy duty motor coupled by means of V - Belt with pitch pulley system is housed

inside the frame. Speed can be controlled through a mechanical speed control system. 150 to 200 rpm.Work




26/77





Optional Accessories DC Motor Drive with Continuously Variable Electronic Speed Regulator in l ieu of mechanical speed control & A. C. Motor (RPM range from 50 to 250 rpm)

SIZE : 45 X45 cm 55 X 55 cm 65 X 65 cm 105cm X 105 cm

PRICE: 4000/ - 4600/ - 9200/ - 9500/ -

Digital RPM/ speed meter. ************************************** 8300/ - Mechanical Timer ****************************************** 2550/ - Digital Timer ************************************************ 5200/ - Spare S. S. Clamps ***************************************** 150/-

ISI C-147 V.D.R.L. Rotator

Used for V.D.R.L. Tests, blood grouping tests, various agglutination tests or for

mixing of solutions in small bottles, flasks or beakers. It has a platform of size 300

x 300 mm. and can accommodate blood Bottles slides or flasks using a springholder. Supplied complete with cord and plug to work on 220/230 volts A.C.

(a)fixed speed (fixedat180rpm)******************************** 7150/ -

(b)variable speed******************************************* 9800/ -


Platform size (cm)

Flask Cap: ml 45x45 55x55 65x65 100x100 105x105

50 36 49 64 121 144

100 36 49 64 121 144

150 25 36 49 100 121

250 16 25 36 81 100

500 9 16 25 64 81

1000 4 9 16 49 64

Motor Capacity H.P. H.P. 1 H.P. 1 H.P. 1 H.P.

Prices 27600/ - 34500/ - 43700/ - 66700/ - 78200/ -

Price of Spare

Platform5400/ - 6200/- 7100/- 9800/-

11000/-


27/77





Automatic 0-60 minutes "GERMAN" Timer ************************ 2300/ - Microprocessor Based Digital RPM Meter ************************** 9200/-

ISIC-148 Kahn (Reciprocating) Shaking M

achine

Kahn racks, bottles or flasks of different sizes can be shaken by adjusting the

compartments provided on the shaking rack. DC Motor Drive with continuously

variable electronic speed regulator, The rate of motion can be adjusted by

electronic speed regulator from 140 to 250 r.p.m approximately. To work on

220/230 volts. A.C. supply.

Platform Size Body

20" x 13" x 4" *********************************** 20700/- 31" x 17" x 4" *********************************** 2300/ - 36" x 18" x 4" *********************************** 27600/-


Microprocessor based digital RPM counter **************** 9200/ - Automatic 0-60 minutes "GERMAN" Timer **************** 2300/ - Automatic Digital Timer ****************************** 6000/ -

ISIC-149 Wrist Action Shaking Machine

It has a heavy cast iron with rugged construction and two side arms for holding flasks.

Fitted with a F.H.P heavy duty motor with variable speed. Can hold flasks from 100 to

1000 ml. Capacity. Supplied with cord and plug to work on 220/230 volts AC. supply.

To hold 4 flasks. ********************************************* 9200/ - To hold 4 flasks and top platform to hold 4 flasks/ bottle. ************** 11300/ - To hold 8 flasks. ********************************************* 1000/ - To hold 8 flasks and top platform to hold 4 flasks/bottles.************** 13800/ -


Automatic 0-60 minute "GERMAN" Timer ***************************** 2300/ - Microprocessor based digital RPM Meter ****************************** 9200/ -

ISI C-150 Gel Rocker Shaker


28/77





Having variable speed of 10 to 50 rpm & angle tilt of20 to 60 the unit is fitted with D.C. Driven motor with

variable speed and Timer

12" x 12" ********************************** 13800/- 18" x 18" ********************************** 20200/- 24" x 24" ********************************** 28200/- 36" x 36" ********************************** 48300/-


Digital RPM/Speed Meter **************************************** 8600/ -

ISI C-151 Vortex Shaker (Test Tube Shaker)

Useful for stirring centrifugal tubes, test tubes or small flasks. Fitted with a

Neoprene rubber cup mounted eccentrically on the shaft against which at its is

held the tube with its lower end pressing against the cup. Mixing action is

controlled by varying the angle and pressure of the tube against The cup. Fitted

with speed control arrangement. To work on 220/230 volts AC. Supply.

With On/Off Switch ********************************** 3900/ - With touch On/Off type ***************************** 4400/ -

ISIC-152 Flocculate (Jar Testing Apparatus)Estimate the dosing of alums and such other coagulants for treatment of waterand effluent. Samples is easilj viewed by diffused base illumination with florescenttube placed below plastic plate & black background. Fitted witt" D.C.Motor of 1/20HP with variable speed upto 180 RPM controlled by speed regulator. Provided withstain lesE steel paddles with adjustable spacers to adjust the depth of paddles.

capacity upto 2 ltrs

(a)for two stirrers ************************** 19000/ -

(b)for four stirrers***************************** 23000/ -

(c)for six stirrers****************************** 26500/ -

Optional Accessories :

Attachmentforfeeding to all the stirring units simultaneously. ********************* 2550/ - Revolution Counterto cost extra ******************************************** 2200/ - Automatic 0-60 minute "German" Timer ************************************* 26500/ -


29/77





ISIC-153 Magnetic Stirrers (Heavy Duty P ermanent Magnet)

It has a compact stirring device utilizing a rotating magnetic fied (created by a

PERMANENT MAGNET) wh induces variable speed stirring action. Stirring is

accomplished by means of small teflon rotor, which when pla( in the liquid to be

stirred is capable of rotation by magnetic field applied from below the container.

The unit is fit with pilot lamp. To work on 220/230 Volts. AC.

Capcity without hot plate with hot plate spare teflonepadd(A)1 litre 3900/- 4600/- 350/-

(b)2 litre 4400/- 5200/- 350/-

(c)5litre 6000/- 8000/- 450/-

(d)10litre 11000/- 12100/- 650/-

ISI C-154 Laboratory Stirrer

The motor stirrer having maximum speed upto 4000 r.p.m. unit is clamped to a C.P.

rod fitted on a heavy cast iron base. The height and angle of the stirrer can be

adjusted according to the requirement. Variable speed Motor with speed regulator is

fitted with S.S. Stirrer rod to give smooth and noiseless operation.

Capacity without drill chuck without drill chuck

With1/20 h.p motor 7200/- 8500/ -

With1/8h.p motor 9800/ - 11500/ -

With1/8h.p motor 11500/ - 13800/-With1/4H.P motor 12700/ - 15000/-

With1/2H.p motor 18400/ 20700/ -


Automatic 0-60 minutes "GERMAN" Timer ****************** 2300/ -

ISIC-155 Emulsifier ( Homogenizer)

Fitted with F.H.P. motor having speed regulator and Maximum speed 4000 RPM

with perforated S.S. disc. The unit is having arrangement for moving in horizontaland vertical direction (Complete on stand)

With 1/20 H.P. Motor and S.S. Disc and speed regulator ********* 12700/- -do- with 1/4 H.P. Heavy Duty Motor and speed regulator **** ** * 17250/ - -do- with 1/2 H.P. Heavy Duty Motor and speed regulator ******* 20700/ -


30/77





ISIC-156 Filter Holder

FOR STERLITY TEST: Vacuum filter holder for sterility test to hold membrane

(without flask).

Made of Glass to hold membrane filters of dia 47 m.m. 250 ml ********* 4850/ - -do- 5ooml********** 5500 / - Made of S.S. 316 *********************** 6700/ -

ISI C-157 Sterility Test Unit

Consists of S.S. holders in mainfold of 3 of 6 to hold 47 m.m. dia,. membrane filters,

The tops of the holders are connected to the outlets of the flushing tube with silicone

tubing and glass stop cock. A vacuum resistant flask or woulf bottle must be placed

between the manifold and vacuum pump. (Supplied without Wolfs Bottle and

Vaccum/ Pressure Pump). These units are used for sterlity testing when the membranes filter is to beremoved from the holder for incubation in culture media. Filtration areas is 12.5cm and has a holding

capacity of 250ml. Though only vacuum is required for filleration , some pressure is required for flushing

liquids.

3 Branch Sterility Test Unit. (Made from SS-316) ***************************** 41400/ - 6 Branch Sterility Test Unit (Made from SS-316) ****************************** 73600/ -


Monoblock Vcuume -cum-Low Pressure Pump **************************** 19350/ - Oil Free Vacuume Pump ******************************************** 20700/ -

ISI C-158 Sieve Shaker (Table Top)

Fitted with a FHP motor, it can accommodate six sieves of 8" dia. Speed can be

regulated Through a continuously variable speed regulator fitted to the unit. To

work on 220/230 volts A.C. (Without Sieves)

For 8" dia sieves ****************************** 16100/-

For 12" dia sieves ***************************** 24200/ -


Automatic 0-60 minute "GERMAN" Timer *******************************2300/- Digital Timer *****************************************************5200/-


31/77





ISI C-159 Gyratory Sieve Shaker

To carry upto 7 sieves of 8" dia it is driven by 1/4 HP electric motor, through

reduction gear. The sieve table doesn't rotate but is inclined from the vertical axis the

direction. In addition to the gyratory motion of the table, there is an upward and

downward movement ensuring that each square inch of the sieve is utilised. To works

on on 220/230 Volts single phaseAC. Supplied complete with adaptor for 8" sieves but withouttest sieves


Adaptor for 12" Sieve ***********************************5500/- Automatic 0-60 minute "German" Timer **********************2500/- Digital Timer *******************************************5200/-

ISI C-160 Ro tap Sieve Shaker

To carry upto 7 sieves of 8" dia it is driven by 1/4 HP electric motor, through

reduction gear. The whole gear mechanism which gives circular end to end motion

runs in oil bath. The tapping motion is given by hammer from top. Works on 220/230

volts single phase AC. Supplied complete with adaptor for 8" sieve but without test

sieve. Fitted with AUE/GE/CROMPTION/EQUIVALENT MOTOR.


Automatic 0-60 minute "German" Timer ************************** 3250/- Digital Timer *********************************************** 5200/ -

ISI C-161 W et Sieve Shaker (Yoder Type)

This Yoder type motor driven sieve shaker is for carrying out wet sieve analysis of

material. Consists of a water reservoir and a holder for sieve which can take upto

7 sieve of 8" dia. The shaker is driven by 1/4 HP motor through a belt drive.

Suitable to operate on 230 volts, 50 cycles, single phase A.C.

CAPACITY with PERFECT/EQUIVALENT motor

With G.I. Tank with S.S.tank

(a)For 1 set 39,100/ - 50,600/ -

(b)For 2 sets 51,800/ - 62,100/ -

c) For 4 sets 59,800/ - 69,000/ -


32/77






(A) Automatic 0-60 GERMAN Timer ******************* 3,250/-

ISI C-162 Test Sieves (fine series in 8" di a. Brass frame)

B.S.S. A.S.T.M. I.S.I. Microns M.M. 8Dia 12Dia4 5 --- 480 4.75 750/- 1500/-5 6 340 1812 3.35 750/- 1,500/-6 7 280 2411 2.80 750/- 1,500/-7 8 240 2207 2.36 750/- 1,500/-8 10 200 2057 2.00 750/- 1,500/-10 12 170 1698 1.70 750/- 1500/-12 14 140 1005 1.40 750/- 1500/-14 16 120 1200 1.18 750/- 1500/-16 18 100 1000 1.00 750/- 1500/-18 20 85 850 0.850 750/- 1500/-22 25 70 710 0.710 750/- 1500/-25 30 60 600 0.600 750/- 1500/-30 35 50 500 0.500 750/- 1500/-36 40 40 425 0.425 750/- 1500/-44 45 35 355 0.355 750/- 1500/-52 50 30 300 0.300 750/- 1500/-60 60 25 250 0.250 750/- 1500/-72 70 20 212 0.212 750/- 1500/-85 80 18 180 0.180 750/- 1500/-

100 100 15 150 0.150 750/- 1500/-120 120 12 125 0.125 900/- 1600/-150 140 10 106 0.106 1000/- 1700/-170 170 9 90 0.90 1100/- 1750/-200 200 8 75 0.75 1100/- 1950/-240 230 7 63 0.63 1150/- 2050/-300 270 6 53 0.53 1300/- 2250/-325 300 5 45 0.45 1400/- 2650/-350 325 4 44 0.044 1650/- 2800/-400 380 3 40 0.040 1950/- 3250/-500 ---- --- 25 0.025 5300/- 9000/-Receiving Pan and Lid made of Brass 8 750/- 1500/-

ISI C-163 Test Sieves (Coarse Series)

Made of perforated steed plate with square holes. Available in following aperture of

125,160,100,90,80,75,63 53,50,45,40,37.5,31.5,26.5,25,22.4,19, 16, 13.2, 12.2,

11.2, 10.2,10,9,5,8,6.7,6.3,5.6,4.75,2.8 m.m.


33/77





With brass frame 8" dia ******************************* 750/- With G.I. frame 12" dia ******************************* 550/- With G.I. frame 18" dia ******************************** 750/-

ISIC-164 Bottle Washing Machine

Mounted on heavy duty angle iron stand duly painted with tank made of G.!. / S.S.

Electrically motor operatic with quick released chuck which can. Accommodate of

different variety of nylon brushes for cleaning test tub, bottles etc., with 12 rinses to

drill chuck.

With G.I. soaking tank of size 30"x20"x12" ********************* 33,500/- With G.I. soaking tank of size 30"x20"x18" ********************* 37,500/- With S.S. soaking tank of size 30"x20"x12" ********************* 48,300/- With S.S. soaking tank of size 30"x20"x18" ********************* 56,500/- ISIC-165 Ball Mill (Laboratory type)

Electrically operated, Maximum speed 80 RPM, Fitted with a 1 1/4 FHP motor and

with steel balls for mixing and grinding. capacity from a few gms. to 1/2/5 Kg.

Works on 220 Volts A.C. Mains. Provided with Aluminum / Stainless Steel jar.

Capacity Aluminum Stainless Steel

(1)1Kg. Jar 12,100/ - 13,800/ -

(2)2Kg. Jar 15,500/ - 18,400/ -

(3)5Kg. Jar 28,000/ - 32,800/ -


Automatic 0-60 minute "German" Timer ******************** 2,300/-

ISI C-166 Lab Wi lley Grinder (Arthur H. Thomas type)

The Chamber is fitted with a hopper provided with a cover. Three delivery S.S. Sieves,

Brush, L-N key & Plastic receiver are supplied. A removable plexi-glass plate permits

obversation during operation. Fitted with AUE/GE/CROMPTON/EQUIVALENT MOTOR.

Chamber Size Motor Cap M.S. Chamber S.S.Chamber

(1)40mmX25mm 0.25 H.P. 17,200/ - 19,800/ -(2)65mmX25mm 0.25 H.P. 19,350/ - 23,600/ -

(3)100mmX50mm 0.50 H.P. 27,500/ - 42,000/ -

(4)200mmX75mm 1.00 H.P. 46,600/ - 78,800/ -


Automatic 0-60 minute "German" Timer PRICE***************** 2,300/-


34/77





ISIC-167 Agate Mortar Pestle (Fisher Type) Electric

For unattened grinding of non gummy and non fibrous materials. Extensively used

for preparing coal samples for calorific tests.The motor revolves and the pestle

moves back and fourth in a pattern reaching all parts of the mortar. Its metallic

housing with aF.H.. Motor driven detachable turn table of cast aluminium has

adjustale posts to hold mortars of 75 to 135 m.m. dia. Thew arm of the pestle

drivintg mechanism has inged, heavy head which cn be raised to inspect or

remove the sample or additional material to be added as disered. A build-in timer

permits selection of grinding operation upto 60 min. The grinding vessel and mortar are all completely

covered by a clear acrylic cover. To opeate on 220 V.A.C.

With 75 mm dia Agate Mortar & Pestle and "GERMAN" Timer ***************** 26,500/- With 100 mm dia Agate Mortar & Pestle and "GERMAN" Timer **************** 32,200/ -

ISI C-168 Aeroso l Disinfecto r (S.S. Body)

It instantly converts liquid formalin/disinfecting liquid, into the true aerosol particles,

Due to high aerodynamic stability the formalin droplets remain suspended for longer

duration and thus ensure 100% sterile germ free and zero bacteria environment.

Asingle unit can sterlize 250 cu. Meters. (9000 cu.ft) in just 30-60 minutes, To work

on 220/230 V.A.C.

(1)Capacity 1.5 litres ************************************ 11,500/-

(2)Capacity 5.0 litres *********************************** 16,700/ -


Automatic "GERMAN" Timer **************************** 2,550/-

ISI C-169 Hu midifier ( S.S. Body) (CAP . 5.0 Liters)

Based on the rotating disc-splash plate principal, It produce only super fine particles of

micron size, which become part of the atmosphere, thereby reaching every corner of

the room, resulting in uniform humidity. Due to the upward thrust imparted to the

micron sized water droplets, by high speed motorised unit, they remain suspended in

the atmosphere for longer duration of time. Time unit is capable of atomizing upto 3

liters of water in an hour at full evaporation in the driest possible ambient conditions. The unit has body

made up of S. Steel unit is effective for an enclosed space of volume upto 40 cu. mts.. The unit is providedwith high speed 2800 RPM motor to run longer period, and the blades are aerodynamically balanced to

ensure dropless fumigation. To work on 220/230 volts.

PRICE ************************************ 14,500/-



35/77





Control box with humidistat ******************* 4850/ - Automatic 0-60 minutes "GERMAN" Timer ******** 2550/ -

ISI C-170 An aerobic Culture Jar ( B.T.L. Type)

Modified Macintosh and Fildes pattern has all metal construction consisting of a S.S.

Jarwith a top flangs recessed for a thyroidal rubber sealing ring and a cover held in

place by a strong bridge clamp. The cover is fitted with two needle valves for

evaluation and a sachet containing a catalyst. A side arm on the jar is rovided for

connecting to Semisolid Lucas Indicator. (The unit is supplied without Semi-Solid

Lucas Indicator). Supplied complete with pressure-cum-vacuum gauge.

Size: 12cm(dia)x20cm(ht) **************************** 11,500/-

ISIC-171 Vacuum Pump (Monoblock) ( Beltless) W ith Moisture Trap &

Vacuum Gauge

Capacity With Perfect Motor With Crompton Motor

45litres, fitted with 1/4 H.P. Motor 9,800/ - 12,100/ - 75litres, fitted with 1/2 H.P. Motor 16,100/ - 19,000/ -

ISIC-172 Rotary Vacuum Pum p

Vacuum Pumps are mounted on a heavy steel base plate, and have a wide range of

oil sealed pumps. Fitted with heavy duty electric motor, all pumps are V-Belt driven

at a speed of 1400 RPM. Pumps are fabricated out of high grade cast iron and are

worked on sophisticated machines to give accuracy in microns, thus leading to very

high sustained vacuum. Supplied in single stage or double stage models. All vacuum

pumps are fitted with belt guard, vacuum gauge as a standard feature. To work on

220/230 voltsA.C. Supply.


Moisture Trap. ******************************************** 3,250/- Vaccum Gauge with regulator ******************************** 1,850/-


36/77





Non Return Value ****************************************** 1,500/- Cromption Motor in place of Perfect motor ************************ 5,800/-

Capacity Motor Capacity With Perfect/ Equivalent MotorSingle Stage Double Stage

25 Itr / min 0.25 H.P. 12,100/- 16,100/-

50 Itr / min 0.25 H.P. 14,400/- 17,800/-

75 Itr / min 0.25 H.P. 16,700/- 20,200/-

100 Itr / min 0.50 H.P. 20,200/- 22,500/-

200 Itr / min 1.00 H.P. 29,900/- 33,500/-

300 Itr / min 1.00 H.P. 39,100/- 41,400/-

500 Itr / min 2.00 H.P. 75,000/- 87,400/-

ISIC-173 Vacuum-Cum-Pressure Pump (Diaphragm Type) (Beltlessand Oil Free)

It is a double stage pump to create vacuum through a diaphragm, where continues

operations are required without the fear of sample contaminations through oil vapours

where even a slightest Environment contamination through oil mist is forbidded. To work

on 220/230 volts A.C.

Capacity 25ltrs. / min. air displacement (DOUBLE HEAD) *************** 13,800/- Capacity 45ltrs. / min air displacement (DOUBLE HEAD) *************** 20,700/ -

ISIC-174 High Precision Digital Melting P oint Apparatus

Melting point is displayed on the 3Y> digit mounted on the front panel, The

instrument basically consists of a miniature furnace with controllable heating rate

arrangement, an air circu

Price List for Lab Equipment

Documents

Transcript of Price List for Lab Equipment