PRICE LIST E2aliaxis-ui.at/wp-content/uploads/2017/05/E2.17-PVC-U-Manual-Valves-2017.pdfDIN 8062, NF...

PRICE LIST E2.17PVC-U MANUAL VALVES

2

Since 1954 FIP produces injection moulded valves and fittings in thermopla-stic materials for pressure pipeline systems thus becoming nowadays the lar-gest European valves manufacturer. FIP is a company of the Aliaxis Group: a worldwide industrial holding, ga-thering together a series of companies manufacturing and marketing plastic plumbing products for building, industrial and public utilities applications. FIP products are manufactured on EU production sites, operating to the Quality Assurance System in compliance with ISO 9001 and with the Environmental Management System ISO 14001 standards requirements.Moulded in FIP products there are over 50 years of know-how powered by a strong quest for innovation.

Company Certificates

Cert. N° 1 in compliance with the Standard UNI EN ISO 9001

Cert. N° 70 in compliance with the Standard UNI EN ISO 14001

CE Conformity

CE conformity according to European directives EC/2104/68.

R01-02-2017

Product managerPVC-U Manual & Actuated valves - Lucia Cambiaso Tel. +39 010 9621 266

PVC-C Manual & Actuated valves - Mauro Nobile Tel. +39 010 9621 414

PP-H & PVDF Manual & Actuated valves- Silvia Porcile Tel. +39 010 9621 267

Variable area flowmeters - Alberto Claveri Tel. +39 010 9621 340

PVC-U & PVC-C fittings - Mauro Nobile Tel. +39 010 9621 414

PE, PP-H & PVDF fittings - Silvia Porcile Tel. +39 010 9621 267

PP Compression fittings MAGNUM System& Clamp saddles - Stefano Carrea Tel. +39 010 9621 255

Technical Support [email protected]

3

PVC-UMANUAL VALVES

General info

How to read FIP Valves Commercial Codes page 4

Reference standards page 6

Approvals and quality marks page 8

BALL VALVES

VKD DN 10÷50 - DUAL BLOCK® 2-way ball valve page 10

VKD DN 65÷100 - DUAL BLOCK® 2-way ball valve page 16

VKR DN 10÷50 - DUAL BLOCK® regulating ball valve page 21

TKD DN 10÷50 - DUAL BLOCK® 3-way ball valve page 27

VXE DN 10÷50 - Easyfit 2-way ball valve page 31

VXE DN 65÷100 - Easyfit 2-way ball valve page 35

VEE DN 10÷50 - Easyfit 2-way ball valve page 39

VEE DN 65÷100 - Easyfit 2-way ball valve page 43SXE-SSE DN 10÷50 - Easyfit true union ball and spring check valve

page 47

SXE-SSE DN 65÷100 - Easyfit true union ball and spring check valve page 55

BUTTERFLY VALVES

FE DN 40÷200 - Butterfly valve page 62

FK DN 40÷400 - Butterfly valve page 64

DIAPHRAGM VALVES

DK DN 15÷65 - DIALOCK® 2-way Diaphragm valve page 72

VM DN 80÷100 - Diaphragm valve page 79

CM DN 12÷15 - Compact Diaphragm valve page 82VM/RM DN 8÷15 - Mini-Diaphragm valve and Diaphragm cock valve

page 86

OTHER VALVES

RV DN 10÷100 - Sediment Strainer page 89

VV DN 10÷50 - Angle seat valve page 93

VR DN 10÷100 - Check valve page 95

VA DN 15÷50 - Air Release Valve page 98

VZ DN 10÷50 - Foot valve page 100

CR DN 40÷300 - Wafer Check Valve page 102

CONNECTIONS

Connections for ball and angle seat valves page 104

Spare end connectors for valves VA and VZ series page 111

Spare end connectors for unionised diaphragm valves page 113

Packaging Information page 117

Conditions of supply page 118

INDEX

4

FKVALVE MODEL

OCONNECTION STD.

CMATERIALS

VKD ball 2-way DUAL BLOCK® I ISO socket (metric) A ABS

TKD ball 3-way DUAL BLOCK® T D ISO spigot (metric) C PVC-C

LKD portball 3-way DUAL BLOCK® L B ISO butt welding (metric) F PVDF

VKR regulating ball 2-way DUAL BLOCK® BE PE100 ISO butt welding (metric) M PP-H

VXE ball 2-way Easyfit G JIS socket threaded (inch) V PVC-U

VEE ball 2-way Easyfit P Hose adaptor (metric) T PVC-U Transparent

SXE ball spring check valve Easyfit F BSP female threaded (inch)

FK butterfly multi-purpose R BSP male threaded (inch)

FE butterfly water L BS female (inch)

VM diaphragm M BS male (inch)

VMU unionised diaphragm A ASTM socket (inch)

CM compact diaphragm Y ASTM spigot (inch)

CMU unionised compact diaphragm N NPT socket threaded (inch)

DM direct acting diaphragm (only pneumatically actuated) J JIS socket (inch)

DMU unionised direct acting diaphragm (only pneumatically actuated) O ISO-DIN flanged (metric)

MK piston act. diaphragm (onlypneumatically actuated) OA ANSI 150 flanged (inch)

MKU unionised piston actuator diaphragm (only pneumatically actuated) OL LUG ISO-DIN (mm) flanged

RM diaphragm cock OAL LUG ANSI 150 (inch) flanged

RP piston cock

RV strainer

RVU unionised strainer

VR piston check valve

VRU unionised piston check valve

VV angle seat valve

VVU unionised angle seat valve

SR ball check valve

VZ foot valve

VA air release valve

SV pressure relief valve

CR wafer check valve

Ex: FKOCRM315F FK butterfly valve, PVC-C disc, gear box, d 315, FPM gasket

CODESHOW TO READ FIP VALVES COMMERCIAL CODES

5

RMCOMMAND SYSTEM

315 SIZE

FSEAL

MATERIALMETRIC SERIES d (mm) INCH SERIES d/R (inches)SHX handle block (for VKD ball valves) 006 6 E EPDM

LM lever (for butterfly) 008 8 F FPM

RM gear box (for butterfly) 010 10 N NBR

FM bare shaft (for butterfly) 012 12 014 1/4” P PTFE

NC Pneumatic Normally Closed 016 16 038 3/8”

NO Pneumatic Normally Open 020 20 012 1/2”

DA Pneumatic Double Acting 025 25 034 3/4”

SA Pneumatic Single Acting 032 32 100 1”

EA Electric 230V AC 040 40 114 1” 1/4

EB Electric 115V AC 050 50 112 1” 1/2

EE Electric 24V AC 063 63 200 2”

EF Electric 24V DC 214 2” 1/4

EI Electric 400V trifase 075 75 212 2” 1/2

EM Electric 90-240V AC 234 2” 3/4

EL Electric 24V AC/DC 090 90 300 3”

110 110 400 4”

125 125

140 140 500 5”

160 160 600 6”

180 180

200 200

225 225 800 8”

250 250

280 280 810 10”

315 315 812 12”

355 355

400 400

REFERENCE

• ANSI B16.5 Pipe flanges and flanged fittings-NPS 1/2 to NPS 24 mm / inch• ASTM D 2464 Standard Specification for Threaded Poly Vinyl Chloride (PVC) Plastic

Pipe Fittings• ASTM D 2467 Standard Specification for Poly Vinyl Chloride (PVC) Plastic Pipe Fittings,

Schedule 80• BS 10 Specification for flanges and bolts for pipes, valves and fittings• BS 1560 Flanges for pipes, valves and fittings (Class designated). Steel, cast iron

and copper alloy flanges. Specification for steel flanges • BS 4504 Flanges for pipes, valves and fittings (PN designated).• DIN 2501 Flanges, dimensions• DIN 2999 Whitworth thread for threaded pipes and fittings• DIN 3202 Overall valve dimensions• DIN 3441-2 Dimensions of PVC-U ball valves• DIN 8062 Dimensions of PVC-U pipes• DIN 8063 Dimensions of PVC-U fittings• DIN 16962 PVC-C fittings for butt-welding or socket fusion, dimensions• DIN 16963 Pipe connections and pipe components for pressurised fluids in HDPE• DVS 2204 - 2221 Solvent welding of thermoplastic materials PVC-U• EN 558-1 Industrial valves - face-to-face and centre-to-face dimensions of metal

valves for use in flanged pipe systems - Part 1: PN designated valves • EN 1092-1 Flanges and their joints - Circular flanges for pipes, valves and accessories

- Part 1: Steel flanges, PN designated • EN ISO 1452 Characteristics of fittings and pipes in PVC-U for piping systems intended

for water supply

STANDARDSProduction of the PVC-U lines is carried out according to the highest quality standards and in full compliance with the environmental restrictions set by the applicable laws in force and in accordance with ISO 14001. All products are made in accordance with the quality guarantee system in compliance with ISO 9001.

6

• EN ISO 15493 Specifications for components and the system (Pipes, Fittings and Valves)

in ABS, PVC-U, PVC-C for industrial applications• EN ISO 16135 Industrial valves - Ball valves of thermoplastic material• EN ISO 16136 Industrial valves - Butterfly valves of thermoplastic material• EN ISO 16137 Industrial valves - Check valves of thermoplastic material• EN ISO 16138 Industrial valves - Diaphragm valves of thermoplastic material• ISO 7 PVC-U fittings with threaded connections for pressure-tight joints• ISO 161-1 Dimensions of PVC-U pipes and fittings - metric series• ISO 228-1 PVC-U fittings with threaded connections• ISO 727 PVC-U pipes and fittings. Dimensions and tolerances - metric series• ISO 5211 Part-turn actuator attachments• ISO 5752 Metal valves for use in flanged pipe systems; Face-to-face and centre-to-

face dimensions• ISO 7005-1 Metal flanges; part 1: steel flanges• ISO 9393 Thermoplastics valves - pressure test methods and requirements• JIS B 2220 Flanges for metal pipes• JIS K 6743 Polyvinyl chloride (PVC-U) pipe fittings for water supply• UNI 11242 Solvent welding of PVC-U pipes, fittings and valves

7

E2.

17

APPROVALS AND

• ABS FIP PVC-U valves have been recongnised as suitable for conveying, treat-

ing domestic and air conditioning waters on board ships and other units classified by the American Bureau of Shipping (ABS)

• ACS FIP PVC-U ball valves are certified as suitable for coming into contact with

water intended for human consumption according to the Attestation de conformité sanitaire (ACS)

• Bureau Veritas FIP PVC-U valves have been recognised as suitable for conveying, treat-

ing domestic and air conditioning waters on board ships and other units classified by the Bureau Veritas - Marine Division

• DIBt FIP PVC-U valves have been tested and certified by DIBt (Deutsches Insti-

tut für Bautechnik)

• GOST-R - EAC FIP PVC-U valves are GOST-R and EAC certified in accordance with Rus-

sian regulations on Safety, Hygiene and Quality

• NSF FIP PVC-U ball valves are listed according to the NSF/ANSI Standard 61 -

Drinking Water System Components - Health Effects

QUALITY MARKS

8

TA-Luft • TA-Luft FIP PVC-U valves have been tested and certified ac-

cording to “TA-Luft” by MPA Stuttgart in compliance with the Technical Instruction on Air Quality Control TA-Luft/ VDI 2440

• UKR SEPRO FIP PVC-U valves are certified in accordance with

Ukrainian regulations on Safety and Quality

• WRAS FIP PVC-U valves are recognised by the WRAS (Water

Regulation Advisory Scheme - UK)

9

E2.

17

Technical specificationsConstruction 2-way True Union ball valve with locked carrier and

union nuts.Size range DN 10 ÷ 50Nominal pressure PN 16 with water at 20 °CTemperature range 0 °C ÷ 60 °CCoupling standards Solvent welding: EN ISO 1452, EN ISO 15493, BS

4346-1, DIN 8063, NF T54-028, ASTM D 2467, JIS K 6743. Pipe coupling as per EN ISO 1452, EN ISO 15493, DIN 8062, NF T54-016, ASTM D 1785, JIS K 6741

Thread: ISO 228-1, DIN 2999, ASTM D 2464, JIS B 0203

Flanging system: ISO 7005-1, EN ISO 1452, EN ISO 15493, EN 558-1, DIN 2501, ANSI B.16.5 cl. 150, JIS B 2220

Reference standards Construction criteria: EN ISO 16135, EN ISO 1452, EN ISO 15493Test methods and requirements: ISO 9393Installation criteria: DVS 2204, DVS 2221, UNI 11242Actuator couplings: ISO 5211

Valve material PVC-USeal material EPDM, FPM (standard size O-Ring);

PTFE (ball seats)

Control options Manual control; electric actuator; pneumatic actuator

VKD

FIP has developed aVKD DUAL BLOCK®ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs required by industrial applications.

DUAL BLOCK® 2-WAY BALL VALVE

DN 10÷50

• Connection system for solvent weld, threaded and flanged joints• Patented SEAT STOP® ball carrier system that lets you micro-adjust ball

seats and minimise the axial force effect• Easy radial dismounting allowing quick replacement of O-rings and ball

seats without any need for tools• PN16 True Union valve body made for rigid PVC-U injection moulding

equipped with built-in bores for actuation. ISO 9393 compliant test requi-sites

• Option of dismounting downstream pipes with the valve in the closed posi-tion

• Floating full bore ball with high surface finish• Integrated bracket for valve anchoring• Ball seat carriers can be adjusted using the Easytorque adjustment kit

10

1 Ergonomic HIPVC handle equipped with removable tool to adjust the ball seat carrier.

2 Handle lock 0°- 90° SHKD (available as an accessory) ergonomically operable during service and padlockable

3 Robust integrated bracket for valve anchoring, for easy and quick automation even after valve installation on the system via the Power Quick module (optional)

4 DUAL BLOCK® patented lock system that ensures union nut tightening hold even in severe conditions such as vibrations or heat dilation

1

2

3

4

11

E2.

17

12

VKDIVDUAL BLOCK® ball valve with metric plain socket ends for solvent welding

d DN PN EPDM code € FPM

code € pack n./box

box type

16 10 16 VKDIV016E 32,39 VKDIV016F 39,27 1 22 03

20 15 16 VKDIV020E 33,71 VKDIV020F 40,32 1 22 03

25 20 16 VKDIV025E 39,88 VKDIV025F 48,34 1 12 03

32 25 16 VKDIV032E 49,67 VKDIV032F 60,05 1 12 03

40 32 16 VKDIV040E 61,85 VKDIV040F 73,15 1 8 03

50 40 16 VKDIV050E 79,73 VKDIV050F 93,85 1 8 03

63 50 16 VKDIV063E 99,26 VKDIV063F 127,16 1 6 02

VKDIV/SHXDUAL BLOCK® ball valve with handle block and stainless steel inserts for fixation, metric plain socket ends for solvent welding



box type

16 10 16 VKDIVSHX016E 46,99 VKDIVSHX016F 53,92 1 22 03







VKD DN 10÷50

DUAL BLOCK® 2-WAY BALL VALVEPVC-U

13

E2.

17

VKDDVDUAL BLOCK® ball valve with metric plain spigot ends for solvent welding



box type

16 10 16 VKDDV016E 32,39 VKDDV016F 39,27 1 22 03

20 15 16 VKDDV020E 33,71 VKDDV020F 40,32 1 22 03

25 20 16 VKDDV025E 39,88 VKDDV025F 48,34 1 12 03

32 25 16 VKDDV032E 49,67 VKDDV032F 60,05 1 6 03

40 32 16 VKDDV040E 61,85 VKDDV040F 73,15 1 4 04

50 40 16 VKDDV050E 79,73 VKDDV050F 93,85 1 6 03

63 50 16 VKDDV063E 99,26 VKDDV063F 127,16 1 3 03

VKDLVDUAL BLOCK® ball valve with BS plain socket ends for solvent welding



box type

3/8” 10 16 VKDLV038E 33,63 VKDLV038F on request 1 22 03



1” 25 16 VKDLV100E 49,67 VKDLV100F on request 1 12 03

1” 1/4 32 16 VKDLV114E 61,85 VKDLV114F on request 1 8 03

1” 1/2 40 16 VKDLV112E 79,73 VKDLV112F on request 1 8 03

2” 50 16 VKDLV200E 99,26 VKDLV200F on request 1 6 02

VKD DN 10÷50


14

VKDFVDUAL BLOCK® ball valve with BS parallel socket threaded ends

R DN PN EPDM code € FPM


box type

3/8” 10 16 VKDFV038E 34,92 VKDFV038F 42,25 1 22 03

1/2” 15 16 VKDFV012E 36,59 VKDFV012F 43,79 1 22 03

3/4” 20 16 VKDFV034E 43,79 VKDFV034F 50,79 1 12 03

1” 25 16 VKDFV100E 53,76 VKDFV100F 67,71 1 12 03

1” 1/4 32 16 VKDFV114E 68,28 VKDFV114F 79,82 1 8 03

1” 1/2 40 16 VKDFV112E 89,52 VKDFV112F 104,08 1 8 03

2” 50 16 VKDFV200E 112,77 VKDFV200F 141,66 1 6 02

VKDOVDUAL BLOCK ® ball valve with EN/ISO/DIN PN 10/16 fixed flanges, face to face according to EN 558-1.



box type

20 15 16 VKDOV020E 61,55 VKDOV020F 69,78 1 12 03

25 20 16 VKDOV025E 71,28 VKDOV025F 81,88 1 8 03

32 25 16 VKDOV032E 83,56 VKDOV032F 96,04 1 8 03

40 32 16 VKDOV040E 107,19 VKDOV040F 120,71 1 4 03

50 40 16 VKDOV050E 129,67 VKDOV050F 145,93 - 1 05

63 50 16 VKDOV063E 165,98 VKDOV063F 198,06 - 1 05

VKD DN 10÷50


15

E2.

17

VKDOAVDUAL BLOCK ® ball valve with ANSI B16.5 cl.150#FF fixed flanges



box type

1/2” 15 16 VKDOAV012E 61,55 VKDOAV012F 69,78 1 8 03

3/4” 20 16 VKDOAV034E 71,28 VKDOAV034F 81,88 1 8 03

1” 25 16 VKDOAV100E 83,56 VKDOAV100F 96,04 1 4 03

1” 1/4 32 16 VKDOAV114E 107,19 VKDOAV114F 120,71 1 4 03

1” 1/2 40 16 VKDOAV112E 129,67 VKDOAV112F 145,93 - 1 05

2” 50 16 VKDOAV200E 165,98 VKDOAV200F 198,06 - 1 05

VKDBEVDUAL BLOCK® ball valve with PE100 SDR11 metric series long spigot ends (CVDE) for butt fusion or electrofusion



box type

20 15 16 VKDBEV020E 40,68 VKDBEV020F on request 1 22 03





63 50 16 VKDBEV063E 99,04 VKDBEV063F on request - 1 05

VKD DN 10÷50


FIP has developed aVKD DUAL BLOCK®ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs required by industrial applications.This valve is alsoequipped with acustomisableLabelling System.


union nuts.Size range DN 65 ÷ 100Nominal pressure PN 16 with water at 20° CTemperature range 0 °C ÷ 60 °CCoupling standards Solvent welding: EN ISO 1452, EN ISO 15493, BS 4346-

1, DIN 8063, NF T54-028, ASTM D 2467, JIS K 6743. Pipe coupling as per EN ISO 1452, EN ISO 15493, DIN 8062, NF T54-016, ASTM D 1785, JIS K 6741

Thread: ISO 228-1, DIN2999, ASTM D 2467, JIS B 0203

Flanging system: ISO 7005-1, EN ISO 1452, EN ISO 15493, EN 588-1, DIN 2501, ANSI B.16.5 cl.150, JIS B 2220


Valve material PVC-USeal material EPDM, FPM;

PTFE (ball seats)


VKD


• Connection system for solvent weld, threaded and flanged joints• Patented SEAT STOP® ball carrier system that lets you micro-adjust seals

and minimise axial force effects • Easy radial dismounting allowing quick replacement of O-rings and ball


equipped with built-in bores for actuation. ISO 9393 compliant test requisites

• Option of dismounting downstream pipes with the valve in the closed posi-tion

• Full bore ball with high surface finish • Integrated bracket for valve anchoring• Possibility of installing a manual reducer or pneumatic and/or electric actu-

ators by applying an ISO standard bore PP-GR flange• STAINLESS steel co-moulded stem, with square section as per ISO 5211

DN 65÷100

16

1 HIPVC ergonomic multifunctional handle for quick operation, lock and graduated adjustment in 10 positions. Possibility of inhibiting rotation with a lock

2 Customisable Labelling System: LCE module made of a transparent protection plug and customisable tag holder using the LSE set (available as accessory). The customisation lets you identify the valve on the system according to specific needs


4 Double stem with double O-Rings for ball centring and operating torque reduction

1

2

3

4

4

17

E2.

17

18

VKDIVDUAL BLOCK® ball valve with metric plain socket ends for solvent welding



box type

75 65 16 VKDIV075E 298,99 VKDIV075F 357,92 1 1 04

90 80 16 VKDIV090E 380,93 VKDIV090F 452,78 1 1 03

110 100 16 VKDIV110E 428,36 VKDIV110F 527,53 1 1 03

VKDDVDUAL BLOCK® ball valve with metric plain spigot ends for solvent welding



box type

75 65 16 VKDDV075E 298,99 VKDDV075F 357,92 - 1 04

90 80 16 VKDDV090E 380,93 VKDDV090F 452,78 - 1 03

110 100 16 VKDDV110E 428,36 VKDDV110F 527,53 1 1 03

VKDLVDUAL BLOCK® ball valve with BS plain socket ends for solvent welding



box type

2” 1/2 65 16 VKDLV212E 298,99 VKDLV212F 357,92 - 1 04

3” 80 16 VKDLV300E 380,93 VKDLV300F 452,78 - 1 03

4” 100 16 VKDLV400E 428,36 VKDLV400F 527,53 1 1 03

VKD DN 65÷100


19

E2.

17

VKDFVDUAL BLOCK® ball valve with BS parallel socket threaded ends



box type

2” 1/2 65 16 VKDFV212E 322,92 VKDFV212F 381,84 - 1 04

3” 80 16 VKDFV300E 411,40 VKDFV300F 483,28 - 1 03

4” 100 16 VKDFV400E 462,64 VKDFV400F 561,82 1 1 03

VKDOVDUAL BLOCK ® ball valve with EN/ISO/DIN PN 10/16 fixed flanges*, face to face according to EN558-1



box type

75 65 16 VKDOV075E 377,55 VKDOV075F 436,46 - 1 04

90 80 16 VKDOV090E 480,97 VKDOV090F 552,84 - 1 03

110 100 16 VKDOV110E 547,52 VKDOV110F 646,71 1 1 03

* Flanges with oval holes matching both DIN and ANSI standards

VKDOAVDUAL BLOCK ® ball valve with ANSI B16.5 cl.150#FF fixed flanges *



box type

2” 1/2 65 16 VKDOV075E 377,55 VKDOV075F 436,46 - 1 04

3” 80 16 VKDOV090E 480,97 VKDOV090F 552,84 - 1 03

4” 100 16 VKDOV110E 547,52 VKDOV110F 646,71 1 1 03

* Flanges with oval holes matching both DIN and ANSI standards.

VKD DN 65÷100


20

VKDBEVDUAL BLOCK® ball valve with PE100 SDR11 metric series long spigot ends (CVDE) for butt fusion or electrofusion



box type

75 65 16 VKDBEV075E 328,88 VKDBEV075F 387,83 - 1 04

90 80 16 VKDBEV090E 419,02 VKDBEV090F 490,89 - 1 03

110 100 16 VKDBEV110E 471,19 VKDBEV110F 570,38 1 1 03

VKD DN 65÷100


Technical specificationsConstruction 2-way True Union adjusting ball valve with locked

carrier and union nuts.Size range DN 10 ÷ 50Nominal pressure PN 16 with water at 20 °CTemperature range 0 °C ÷ 60 °CCoupling standards Solvent welding: EN ISO 1452, EN ISO 15493, BS

4346-1, DIN 8063, NF T54-028, ASTM D 2467, JIS K 6743. Pipe coupling as per EN ISO 1452, EN ISO 15493, DIN 8062, NF T54-016, ASTM D 1785, JIS K 6741


Flanging system: ISO 7005-1, EN ISO 1452, EN ISO 15493, EN 558-1, DIN 2501, ANSI B.16.5 cl. 150, JIS B 2220



PTFE (ball seats)

Control options Manual control; electric actuator

VKR

The VKR DUALBLOCK® valve combines high reliability and safety aspects typical ofVKD full bore ball valves with the new flow adjustment function with typical linear curve that meets the most stringent needs typical ofindustrial applications.

DUAL BLOCK® REGULATING BALL VALVE

• Connection system for solvent weld, threaded and flanged joints• Patented SEAT STOP® ball carrier system that lets you micro-adjust seals

and minimise the axial force effect • Easy radial dismounting allowing quick replacement of O-rings and ball

seats without any need for tools • PN16 True Union valve body made for rigid PVC-U injection moulding


• Option of dismounting downstream pipes with the valve in the closed position

• High surface finish stem with double O-Ring and double connection key to ball

• Integrated bracket for valve anchoring• Ball seat carrier can be adjusted using the Easytorque adjustment kit• Actuation option: version with electric modulating actuator with 4-20 mA /

0-10 V inlet and 4-20 mA / 0-10 V outlet to monitor the position • Valve suitable for carrying fluids that are clean and free of suspended par-

ticles

DN 10÷50

21

E2.

17

1

2

5

3

4

1 HIPVC ergonomic multifunctional handle with position indicator and tool to adjust the ball seat carrier

2 Flow direction indication plate and opening angle with graduated scale with 5° detail for clear and accurate readings

3 90° operating angle that permits the use of standard quarter turn actuators

4 The patented ball design provides linear flow adjustment throughout its range of operation even when the valve is open just a few degrees and guarantees minimum pressure drops

5 Patented DUAL BLOCK® system: prevents union nuts from loosening even under extreme operating conditions: e.g. vibration or thermal expansion

22

23

E2.

17

VKR DN 10÷50PVC-U


VKRIVDUAL BLOCK® regulating ball valve with metric plain socket ends for solvent welding



box type

16 10 16 VKRIV016E 132,06 VKRIV016F 138,94 1 22 03

20 15 16 VKRIV020E 133,38 VKRIV020F 139,99 1 22 03

25 20 16 VKRIV025E 149,84 VKRIV025F 158,31 1 12 03

32 25 16 VKRIV032E 179,88 VKRIV032F 190,25 1 12 03

40 32 16 VKRIV040E 190,00 VKRIV040F 201,31 1 8 03

50 40 16 VKRIV050E 248,67 VKRIV050F 262,79 1 8 03

63 50 16 VKRIV063E 258,99 VKRIV063F 286,89 1 6 02

VKRDVDUAL BLOCK® regulating ball valve with metric plain spigot ends for solvent welding



box type

16 10 16 VKRDV016E 132,06 VKRDV016F 138,94 1 22 03

20 15 16 VKRDV020E 133,38 VKRDV020F 139,99 1 22 03

25 20 16 VKRDV025E 149,84 VKRDV025F 158,31 1 12 03

32 25 16 VKRDV032E 179,88 VKRDV032F 190,25 1 6 03

40 32 16 VKRDV040E 190,00 VKRDV040F 201,31 1 4 04

50 40 16 VKRDV050E 248,67 VKRDV050F 262,79 1 6 03

63 50 16 VKRDV063E 258,99 VKRDV063F 286,89 1 3 02

24

VKR DN 10÷50PVC-UDUAL BLOCK® REGULATING BALL VALVE

VKRLVDUAL BLOCK® regulating ball valve with BS plain socket ends for solvent welding



box type

3/8” 10 16 VKRLV038E 132,06 VKRLV038F on request 1 22 03



1” 25 16 VKRLV100E 179,88 VKRLV100F on request 1 12 03

1” 1/4 32 16 VKRLV114E 190,00 VKRLV114F on request 1 8 03

1” 1/2 40 16 VKRLV112E 248,67 VKRLV112F on request 1 8 03

2” 50 16 VKRLV200E 258,99 VKRLV200F on request 1 6 02

VKRFVDUAL BLOCK® regulating ball valve with BS parallel socket threaded ends



box type

3/8” 10 16 VKRFV038E 134,61 VKRFV038F 141,93 1 22 03

1/2” 15 16 VKRFV012E 136,27 VKRFV012F 143,47 1 22 03

3/4” 20 16 VKRFV034E 153,75 VKRFV034F 160,76 1 12 03

1” 25 16 VKRFV100E 183,95 VKRFV100F 197,91 1 12 03

1” 1/4 32 16 VKRFV114E 196,46 VKRFV114F 207,98 1 8 03

1” 1/2 40 16 VKRFV112E 258,46 VKRFV112F 273,03 1 8 03

2” 50 16 VKRFV200E 272,50 VKRFV200F 301,38 1 6 02

25

VKR DN 10÷50PVC-U


E2.

17

VKROVDUAL BLOCK® regulating ball valve with EN/ISO/DIN PN 10/16 fixed flanges, face to face according to EN 558-1



box type

20 15 16 VKROV020E 161,23 VKROV020F 169,44 1 12 03

25 20 16 VKROV025E 181,23 VKROV025F 191,83 1 8 03

32 25 16 VKROV032E 213,76 VKROV032F 226,23 1 8 03

40 32 16 VKROV040E 235,36 VKROV040F 248,88 1 4 03

50 40 16 VKROV050E 298,61 VKROV050F 314,85 - 1 05

63 50 16 VKROV063E 325,71 VKROV063F 357,80 - 1 05

VKROAVDUAL BLOCK® regulating ball valve with ANSI B16.5 cl.150#FF fixed flanges



box type

1/2” 15 16 VKROAV012E 161,23 VKROAV012F 169,44 1 8 03

3/4” 20 16 VKROAV034E 181,23 VKROAV034F 191,83 1 8 03

1” 25 16 VKROAV100E 213,76 VKROAV100F 226,23 1 4 03

1” 1/4 32 16 VKROAV114E 235,36 VKROAV114F 248,88 1 4 03

1” 1/2 40 16 VKROAV112E 298,61 VKROAV112F 314,85 - 1 05

2” 50 16 VKROAV200E 325,71 VKROAV200F 357,80 - 1 05

26

VKR DN 10÷50PVC-UDUAL BLOCK® REGULATING BALL VALVE

VKRBEVDUAL BLOCK® regulating ball valve with PE100 SDR11 metric series long spigot ends (CVDE) for butt fusion or electrofusion



box type

20 15 16 VKRBEV020E 140,35 VKRBEV020F on request 1 22 03





63 50 16 VKRBEV063E 258,77 VKRBEV063F on request - 1 03


union nutsSize range DN 10 ÷ 50Nominal pressure PN 16 with water at 20 °CTemperature range 0 °C ÷ 60 °CCoupling standards Solvent welding: EN ISO 1452, EN ISO 15493, BS 4346-1,

DIN 8063, NF T54-028, ASTM D 2467, JIS K 6743. Pipe coupling capacity according to EN ISO 1452, EN ISO 15493, DIN 8062, NF T54-016, ASTM D 1785, JIS K 6741

Thread: ISO 228-1, DIN 2999, ASTM D 2467, JIS B 0203.

Flanging system: ISO 7005-1, EN ISO 1452, EN ISO 15493, DIN 2501, ANSI B16.5 cl.150, JIS B 2220.



PTFE (ball seats)


TKD

FIP has developed aTKD DUAL BLOCK®ball valve to introduce a high referencestandard in thermosplastic valve design. TKD is a True Union diverting and mixing ball valve that meets the most stringent needs required inindustrial applications.


• Connection system for solvent weld, threaded and flanged joints• Patented SEAT STOP® ball carrier system that lets you micro-adjust ball

seats and minimise axial force effects• Easy radial dismounting allowing quick replacement of O-rings and ball




• High surface finish stem with double O-Ring and double connection key to the ball, equipped with visual ball position indicator for correct handle installation

• Integrated bracket for valve anchoring• Possibility of installing pneumatic and/or electric actuators thanks to

the robust anchor tower for easy and quick automation using the Power Quick module (optional)

DN 10÷50

27

E2.

17

1

4

2

3

5

1 Ergonomic HIPVC handle equipped with removable tool to adjust the ball seat carrier. Possibility of installing the LTKD stroke limiter (available as an accessory) that permits ball and handle rotation only for set opening and closing angles at 90° or 180°

2 Handle lock 0°- 90° SHKD (available as an accessory) ergonomically operable during service and padlockable


4 Ball shutter high surface finish with floating type full passage with T or L port

5 4 PTFE ball seat system that compensates axial force guaranteeing optimal manageability and long working life

28

29

E2.

17

TKDIV - LKDIVDUAL BLOCK® 3-way ball valve with metric plain socket ends for solvent welding. TKDIV - T bore / LKDIV - L bore

d DN PNTKDIV EPDM code

€TKDIV

FPM code

€LKDIV EPDM code

€LKDIV

FPM code

€ pack n./box

box type

16 10 16 TKDIV016E 56,79 TKDIV016F 64,17 LKDIV016E 62,46 LKDIV016F 70,59 1 6 04





50 40 16 TKDIV050E 121,22 TKDIV050F 151,51 LKDIV050E 133,33 LKDIV050F 166,66 - 1 05

63 50 16 TKDIV063E 152,93 TKDIV063F 191,18 LKDIV063E 168,23 LKDIV063F 210,29 - 1 05

TKDDV - LKDDVDUAL BLOCK® 3-way ball valve with metric plain spigot ends for solvent welding.TKDDV - T bore / LKDDV - L bore

d DN PNTKDDV

EPDM code

€TKDDV

FPM code

€LKDDV

EPDM code

€LKDDV

FPM code

€ pack n./box

box type

20 15 16 TKDDV020E 57,96 TKDDV020F 65,50 LKDDV020E 63,74 LKDDV020F 72,04 1 4 04



40 32 16 TKDDV040E 100,31 TKDDV040F 118,39 LKDDV040E 110,35 LKDDV040F 130,24 - 1 05



TKD DN 10÷50


30

TKDLV - LKDLVDUAL BLOCK® 3-way ball valve with BS plain socket ends for solvent welding. TKDFV - T bore / LKDFV - L bore

d DN PNTKDLV EPDM code

€TKDLV

FPM code

€LKDLV EPDM code

€LKDLV

FPM code

€ pack n./box

box type

3/8” 10 16 TKDLV038E 57,96 TKDLV038F 65,50 LKDLV038E 63,74 LKDLV038F 72,04 1 6 04



1” 25 16 TKDLV100E 83,15 TKDLV100F 95,63 LKDLV100E 91,48 LKDLV100F 105,19 1 4 04

1” 1/4 32 16 TKDLV114E 100,31 TKDLV114F 118,39 LKDLV114E 110,35 LKDLV114F 130,24 1 2 04

1” 1/2 40 16 TKDLV112E 121,22 TKDLV112F 151,51 LKDLV112E 133,33 LKDLV112F 166,66 - 1 05

2” 50 16 TKDLV200E 152,93 TKDLV200F 191,18 LKDLV200E 168,23 LKDLV200F 210,29 - 1 05

TKDFV - LKDFVDUAL BLOCK® 3-way ball valve with BS parallel socket threaded ends. TKDFV - T bore / LKDFV - L bore

R DN PNTKDFV EPDM code

€TKDFV

FPM code

€LKDFV EPDM code

€LKDFV

FPM code

€ pack n./box

box type

3/8” 10 16 TKDFV038E 62,46 TKDFV038F 69,84 LKDFV038E 68,15 LKDFV038F 76,26 1 6 04



1” 25 16 TKDFV100E 91,48 TKDFV100F 103,93 LKDFV100E 99,77 LKDFV100F 113,49 1 4 04

1” 1/4 32 16 TKDFV114E 110,35 TKDFV114F 128,42 LKDFV114E 120,39 LKDFV114F 140,27 1 2 04

1” 1/2 40 16 TKDFV112E 133,33 TKDFV112F 163,65 LKDFV112E 145,45 LKDFV112F 178,79 - 1 05

2” 50 16 TKDFV200E 168,23 TKDFV200F 206,48 LKDFV200E 183,53 LKDFV200F 225,57 - 1 05

TKD DN 10÷50


Technical specificationsConstruction Easyfit 2-way True Union ball valve with locked

carrierSize range DN 10 ÷ 50Nominal pressure PN 16 with water at 20 °CTemperature range 0 °C ÷ 60 °CCoupling standards Solvent welding: EN ISO 1452, EN ISO 15493, BS 4346-1,



Reference standards Construction criteria: EN ISO 16135, EN ISO 1452, EN ISO 15493Test methods and requirements: ISO 9393Installation criteria: DVS 2204, DVS 2221, UNI 11242


PTFE (ball seats)

Control options Manual control

VXE

FIP and Giugiaro Design designed anddeveloped VXE Easyfit, the innovative True Union ballwith union nuttightening control that permitssimple and safe installation for reliable service in time. This valve is also equipped with the customisable Labelling System.

EASYFIT 2-WAY BALL VALVE

• Patented Easyfit system: innovative mechanism based on the principle of the bevel gear pair that controls valve union nut rotation during installa-tion

• Connection system for solvent weld and threaded joints• Valve material compatibility (PVC-U) and elastomer seal elements

(EPDM or FPM), with water, drinking water and other food substances as per current regulations

• Easy radial dismounting allowing quick replacement of O-rings and ball seats without any need for tools

• PN16 True Union valve body made for PVC-U injection moulding and Eu-ropean Directive 97/23/EC compliant for PED pressurised equipment. ISO 9393 compliant test requirements

• Short face to face dimension according to international regulation ISO 7508 series III and European regulation EN 1452 ”short” and fully inter-changeable with previous VX Ergo series models


• Floating full bore ball with high surface finish made in CNC work stations to achieve precise dimensional tolerance and high surface finish

DN 10÷50

31

E2.

17

1 Two position Easyfit ergonomic multifunctional handle with union nut tightening control which can be used to adjust ball seat carriers. Handle use is especially indicated for maintenance work where space is limited and hard to access

2 Customisable Labelling System: built-in LCE module on the handle made up of a transparent protection plug and customisable tag holder with LSE set (available as accessory). The customisation potential lets you identify the valve on the system according to specific needs

3 The PTFE ball seat system with locked carrier adjustable via Easyfit multifunctional handle or Easytorque adjustment kit (available as an accessory)

4 High surface finish valve stem with double O-Ring, produced in CNC work stations to achieve precise dimensional tolerance and high surface finish

21

4

3

32

33

E2.

17

VXEIVBall valve EASYFIT with metric plain socket ends for solvent welding



box type

16 10 16 VXEIV016E 27,50 VXEIV016F 32,89 5 30 04

20 15 16 VXEIV020E 27,61 VXEIV020F 33,02 5 30 04

25 20 16 VXEIV025E 32,59 VXEIV025F 39,52 5 30 04

32 25 16 VXEIV032E 38,35 VXEIV032F 46,38 5 20 04

40 32 16 VXEIV040E 49,86 VXEIV040F 58,97 2 14 04

50 40 16 VXEIV050E 61,35 VXEIV050F 72,22 2 6 04

63 50 16 VXEIV063E 81,67 VXEIV063F 104,65 2 6 04

Note: For the following accessories see the section “Easyfit valves accessories” on EAM Price List- Adhesive labels for own custom label printing (LSE article)

VXEFVBall valve EASYFIT with BS parallel socket threaded ends



box type

3/8” 10 16 VXEFV038E 30,23 VXEFV038F 36,08 5 30 04

1/2” 15 16 VXEFV012E 30,37 VXEFV012F 35,78 5 30 04

3/4” 20 16 VXEFV034E 35,84 VXEFV034F 42,77 5 30 04

1” 25 16 VXEFV100E 42,95 VXEFV100F 50,98 5 20 04

1” 1/4 32 16 VXEFV114E 55,84 VXEFV114F 64,95 2 14 04

1” 1/2 40 16 VXEFV112E 67,49 VXEFV112F 78,37 2 6 04

2” 50 16 VXEFV200E 99,67 VXEFV200F 122,64 2 6 04


VXE DN 10÷50

EASYFIT 2-WAY BALL VALVEPVC-U

34

VXELVBall valve EASYFIT with BS plain socket ends for solvent welding

d DN PN EPDM code € pack n./

boxbox

type3/8" 10 16 VXELV038E 27,61 5 30 04

1/2” 15 16 VXELV012E 32,59 5 30 04

3/4” 20 16 VXELV034E 38,35 5 30 04

1” 25 16 VXELV100E 49,86 5 20 04

1/4 32 16 VXELV114E 61,35 2 14 04

1/2 40 16 VXELV112E 81,67 2 6 04

2” 50 16 VXELV200E 99,66 2 6 04


VXE DN 10÷50

EASYFIT 2-WAY BALL VALVEPVC-U


carrierSize range DN 65 ÷ 100Nominal pressure PN 16 with water at 20 °CTemperature range 0 °C ÷ 60 °CCoupling standards Solvent welding: EN ISO 1452, EN ISO 15493, BS 4346-1,





PTFE, PE (ball seats)

Control options Manual control, electric actuator, pneumatic actuator

VXE

FIP and Giugiaro Designdesigned anddeveloped VXE Easyfit,the innovative True Union ball valve with union nut tightening control system that permits simple and safe installation for reliable service in time. This valve is also equipped with the customisable Labelling System.


• Patented Easyfit system: innovative mechanism based on the multifunc-tional handle quick release mechanism that permits union nut rotation during valve installation and ball carrier adjustment

• Connection system for solvent weld and threaded joints• Valve material compatibility (PVC-U) and elastomer seal elements

(EPDM or FPM), with water, drinking water and other food substances as per current regulations

• Easy radial dismounting allowing quick replacement of O-rings and ball seats without any need for tools

• PN16 True Union valve body made for PVC-U injection moulding and Eu-ropean Directive 97/23/EC compliant for PED pressurised equipment. ISO 9393 compliant test requirements

• Valve body with built in anchoring frame for the special Power Quick module dedicated to accessory or pneumatic and electric actuator instal-lation



DN 65÷100

35

E2.

17

1

1 Innovative Easyfit quick release handle made up of a central hub firmly coupled with the stem valve and dual spoke grip that can be released from the hub with a simple operation and used as a ball seat adjustment tool and as a union nut tightening tool thanks to the hooked insert that, perfectly adapting to their external profile, allows the handle to transform into a wrench to control union nut rotation

2 Customisable Labelling System: built-in LCE module in the hub made up of transparent protection plug and customisable tag holder using the LSE set (available as accessory). The customisation potential lets you identify the valve on the system according to specific needs

3 PTFE ball seat system with locked carrier adjustable via the Easyfit quick release handle

4 Stem with high surface finish and double O-Ring and PTFE anti-friction disk that limits friction to a minimum and grants excellent operating torque

5 Locking device in closing and opening via lock

2

3

45

36

37

E2.

17

VXE DN 65÷100PVC-U

VXEIVBall valve EASYFIT with metric plain socket ends for solvent welding

d DN PNPTFE - EPDM code

€ PTFE - FPM code € PE - EPDM


box type

75 65 16 VXEIV075E 187,84 VXEIV075F 225,24 VXEIV075M 112,72 1 2 04



VXEFVBall valve EASYFIT with BS parallel socket threaded ends

R DN PNPTFE - EPDM code



box type

2"1/2 65 16 VXEFV212E 216,05 VXEFV212F 253,46 VXEFV212M 123,94 1 2 04

3” 80 16 VXEFV300E 270,39 VXEFV300F 315,71 VXEFV300M 157,51 1 2 03

4” 100 16 VXEFV400E 328,90 VXEFV400F 401,94 VXEFV400M 255,11 1 1 03

VXELVBall valve EASYFIT with BS plain socket ends for solvent welding




box type

2"1/2 65 16 VXELV212E 187,84 VXELV212F 225,24 VXELV212M 112,72 1 2 04

3” 80 16 VXELV300E 235,62 VXELV300F 280,94 VXELV300M 142,93 1 2 03

4” 100 16 VXELV400E 309,20 VXELV400F 382,24 VXELV400M 231,74 1 1 03


38

VXEAVBall valve EASYFIT with ASTM plain socket ends for solvent welding




box type

2"1/2 65 16 VXEAV212E 187,84 VXEAV212F 225,24 VXEAV212M 112,72 1 2 04

3” 80 16 VXEAV300E 235,62 VXEAV300F 280,94 VXEAV300M 142,93 1 2 03

4” 100 16 VXEAV400E 309,20 VXEAV400F 382,24 VXEAV400M 231,74 1 1 03

VXEBEVBall valve EASYFIT with PE100 SDR11 metric series long spigot ends (CVDE) for butt fusion or electrofusion




box type

75 65 16 VXEBEV075E 206,61 VXEBEV075F 241,22 VXEBEV075M 123,99 1 2 04



VXE DN 65÷100PVC-UEASYFIT 2-WAY BALL VALVE


carrierSize range DN 10 ÷ 50 Nominal pressure PN 16 with water at 20 °CTemperature range 0 °C ÷ 60 °CCoupling standards Solvent welding: EN ISO 1452, EN ISO 15493, BS

4346-1, DIN 8063, NF T54-028, ASTM D 2467, JIS K 6743. Pipe coupling capacity according to EN ISO 1452, EN ISO 15493, DIN 8062, NF T54-016, ASTM D 1785, JIS K 6741Thread: ISO 228-1, DIN 2999, ASTM D 2467, JIS B 0203.

Reference standards Construction criteria: EN ISO 16135, EN ISO 1452, EN ISO 15493

Test methods and requirements: ISO 9393 Installation criteria: DVS 2204, DVS 2221, UNI 11242Actuator couplings: ISO 5211

Valve material PVC-USeal material EPDM (standard size O-Ring);

PE (ball seats)


VEE

FIP and Giugiaro Design designed anddeveloped VEE Easyfit,the innovative True Union ball valve with union nut tightening control, that permits simple and safe installation for reliable service in time.


• Patented Easyfit system: innovative mechanism based on the principle of the bevel gear pair that controls valve union nut rotation during installa-tion.

• Connection system for solvent weld and threaded joints• Valve material compatibility (PVC-U) with water, drinking water and oth-

er food substance conveyance according to current regulations• Easy radial dismounting allowing quick replacement of O-rings and ball

seats without any need for tools • PN16 True Union valve body made for PVC-U injection moulding and

European Directive 97/23/EC compliant for PED pressurised equipment. ISO 9393 compliant test requirements

• Short face to face dimension according to international regulation ISO 7508 series III and European regulation EN 1452 ”short” and fully inter-changeable with previous VE series models



DN 10÷50

39

E2.

17

21

3

1 Two position Easyfit ergonomic multifunctional handle with union nut tightening control which can be used to adjust ball seat carriers. Handle use is especially indicated for maintenance work where space is limited and hard to access

2 Settings for the customisable Labelling System using the LCE module (available as an accessory). The grey protection plug housed on the handle can be replaced with the transparent plug and customisable tag holder with the LSE set (available as an accessory). The customisation lets you identify the valve on the system according to specific needs

3 The PE ball seat system with locked carrier adjustable via Easyfit multifunctional handle or Easytorque adjustment kit (available as an accessory)

40

41

E2.

17

VEE DN 10÷50PVC-U

VEEIVBall valve EASYFIT with metric plain socket ends for solvent welding


boxbox

type16 10 16 VEEIV016E 16,12 - 60 04

20 15 16 VEEIV020E 16,24 - 60 04

25 20 16 VEEIV025E 19,17 - 40 04

32 25 16 VEEIV032E 22,63 - 25 04

40 32 16 VEEIV040E 29,39 - 14 04

50 40 16 VEEIV050E 34,01 - 15 03

63 50 16 VEEIV063E 47,95 - 8 03

Note: For the following accessories see the section “Easyfit valves accessories” on EAM Price List- Transparent serviece plug + tag holder (LCE article)

- Adhesive labels for own custom label printing (LSE article)

VEEFVBall valve EASYFIT with BS parallel socket threaded ends

R DN PN EPDM code € pack n./

boxbox

type3/8” 10 16 VEEFV038E 17,72 - 60 04

1/2” 15 16 VEEFV012E 17,85 - 60 04

3/4” 20 16 VEEFV034E 21,10 - 40 04

1” 25 16 VEEFV100E 24,88 - 25 04

1” 1/4 32 16 VEEFV114E 32,34 - 14 04

1” 1/2 40 16 VEEFV112E 37,42 - 15 03

2” 50 16 VEEFV200E 52,73 - 8 03




42

VEELVBall valve EASYFIT with BS plain socket ends for solvent welding


boxbox

type1/2” 15 16 VEELV012E 16,24 - 60 04

3/4” 20 16 VEELV034E 19,17 - 40 04

1” 25 16 VEELV100E 22,63 - 25 04

1” 1/4 32 16 VEELV114E 29,39 - 14 04

1” 1/2 40 16 VEELV112E 34,01 - 15 03

2” 50 16 VEELV200E 47,95 - 8 03



VEEBEVBall valve EASYFIT with PE100 SDR11 metric series long spigot ends (CVDE) for butt fusion or electrofusion


boxbox

type20 15 16 VEEBEV020E 21,12 - 50 04

25 20 16 VEEBEV025E 24,94 - 30 04

32 25 16 VEEBEV032E 29,45 - 20 04

40 32 16 VEEBEV040E 38,23 - 10 04

50 40 16 VEEBEV050E 44,25 - 10 03

63 50 16 VEEBEV063E 62,38 - 6 03

VEE DN 10÷50PVC-UEASYFIT 2-WAY BALL VALVE

VEE


• Patented Easyfit system: innovative mechanism that lets you use the quick release handle to adjust the ball carrier

• Connection system for solvent weld and threaded joints• Valve material compatibility (PVC-U) with water, drinking ware and other

food substances according to current regulations• Easy radial dismounting allowing quick replacement of O-rings and ball

seats without any need for tools • PN16 True Union valve body made for PVC-U injection moulding and Eu-

ropean Directive 97/23/EC compliant for PED pressurised equipment. ISO 9393 compliant test requirements

• Valve body with built-in anchoring frame for the special Power Quick Eas-yfit module dedicated to the installation of pneumatic and electric actua-tors or accessories



DN 65÷100FIP and Giugiaro Design designed anddeveloped VEE Easyfit, the innovative True Union ball valve that permits simple and safe installation for reliable service over time.


carrierSize range DN 65 ÷ 100Nominal pressure PN 16 with water at 20 °CTemperature range 0 °C ÷ 60 °CCoupling standards Solvent welding: EN ISO 1452, EN ISO 15493, BS 4346/1,




Valve material PVC-USeal material EPDM (standard size O-Ring);

PE (ball seats)


43

E2.

17

1

2

5

4

3

1 Innovative quick release Easyfit handle made up of a central hub firmly coupled with the stem by a dual spoke grip that can be released from the hub with a simple operation and used as a ball seat adjustment tool

2 Settings for the customisable Labelling System using the LCE module (available as an accessory). The grey protection plug housed on the central hub can be replaced with the transparent plug and customisable tag holder with

the LSE set (available as an accessory). The customisation lets you identify the valve on the system according to specific needs

3 PE seal system with locked carrier adjustable via the Easyfit quick release handle

4 Stem with high surface finish and double O-Ring and PTFE anti-friction disk that limits friction to a minimum and grants excellent operating torque

5 Valve body set for SHE kit installation (available as an accessory) that blocks the closing and opening manoeuvres with a lock

44

45

E2.

17

VEE DN 65÷100PVC-U

VEEIVBall valve EASYFIT with metric plain socket ends for solvent welding


boxbox

type75 65 16 VEEIV075E 80,44 1 2 04

90 80 16 VEEIV090E 102,01 1 2 03

110 100 16 VEEIV110E 165,39 1 1 03

VEEFVBall valve EASYFIT with BS parallel socket threaded ends


boxbox

type2''1/2 65 16 VEEFV212E 88,46 1 2 04

3” 80 16 VEEFV300E 112,43 1 2 03

4” 100 16 VEEFV400E 182,07 1 1 03

VEELVBall valve EASYFIT with BS plain socket ends for solvent welding


boxbox

type2''1/2 65 16 VEELV212E 80,44 1 2 04

3” 80 16 VEELV300E 102,01 1 2 03

4” 100 16 VEELV400E 165,39 1 1 03


46

VEEAVBall valve EASYFIT with ASTM plain socket ends for solvent welding


boxbox

type2''1/2 65 16 VEEAV212E 80,44 1 2 04

3” 80 16 VEEAV300E 102,01 1 2 03

4” 100 16 VEEAV400E 165,39 1 1 03

VEEBEVBall valve EASYFIT with PE100 SDR11 metric series long spigot ends (CVDE) for butt fusion or electrofusion


boxbox

type75 65 16 VEEBEV075E 88,47 1 2 03

90 80 10 VEEBEV090E 112,20 1 2 03

110 100 10 VEEBEV110E 181,92 1 1 03

VEE DN 65÷100PVC-UEASYFIT 2-WAY BALL VALVE

Technical specificationsConstruction SXE: Easyfit True Union ball check valve with locked

carrier SSE: Easyfit True Union spring check valve

Size range DN 10 ÷ 50Nominal pressure PN 16 with water at 20 °CTemperature range 0 °C ÷ 60 °CCoupling standards Solvent welding: EN ISO 1452, EN ISO 15493, BS 4346-1,




Valve material PVC-USeal material EPDM, FPM Spring material (SSE) Available in STAINLESS steel 316, Hastelloy C276,

A316 PTFE encapsulated (DN 32, DN 40 and DN 50 only)

SXE-SSE

The Easyfit check valve line developed with Giugiaro Design offers two different versions: SXE with ball shutter and SSE with spring loaded shutter. Easyfit check valves stand out for the innovative installation method that guarantees reliable service over time.This valve is also equipped with the customisable Labelling System.

EASYFIT TRUE UNION BALL AND SPRING CHECK VALVE• Connection system for solvent weld and threaded joints• Valve material compatibility (PVC-U) with water conveyance, drinking

water and other food substances according to current regulations• PN16 True Union valve body made for PVC-U injection moulding and

compliant with European Directive 97/23/EC for PED pressurised equip-ment. Test requirements compliant with ISO 9393

• Short face to face dimension according to international regulation ISO 7508 series III and European regulation EN 1452 ”short” and fully inter-changeable with VXE and VEE DN 10÷50 ball valve models

• Union nuts with rack for tightening adjustment via Easyfit handle or via Easytorque adjustment kit (available as accessories)

• Vertical (preferable for SXE model) and horizontal installation potential

DN 10÷50

47

E2.

17

1 Customisable Labelling System: built-in LCE module on the valve body made up of transparent protection plug and customisable tag holder using the LSE set (available as accessory). The customisation potential lets you identify the valve on the system according to specific needs

2 Optimised dynamic fluid design: energy savings thanks to the improved valve Kv value with consequent pressure drop reduction

3 High surface finish ball shutter: wear reduction, increase in working life and reduced valve maintenance. Ideal for conveying dirty fluids, even with suspended solids and filaments thanks to the special design that permits internal valve self-cleaning

4 Locked ball seat carrier: safe dismounting for maintenance with the Easyfit multifunctional handle or Easytorque kit

5 Ideal for horizontal installations: perfect seal even with low back pressure.

Silent and durable even with strong vibrations and pulsating fluid

6 PVC-U shutter and springs available made of STAINLESS steel 316, Hastelloy C276, A316 PTFE encapsulated: maximum reliability in a wide field of applications from salt water to aggressive acids

SSE

6

5

SXE

2

3

41

48

49

SXE-SSE DN 10÷50PVC-U

EASYFIT TRUE UNION BALL AND SPRING CHECK VALVE

E2.

17

SXEIVTrue Union Ball Check Valve Easyfit with metric plain socket ends for solvent welding



box type

16 10 16 SXEIV016E 35,74 SXEIV016F 37,83 2 30 04

20 15 16 SXEIV020E 35,89 SXEIV020F 37,96 2 30 04

25 20 16 SXEIV025E 41,48 SXEIV025F 42,38 2 30 04

32 25 16 SXEIV032E 44,07 SXEIV032F 46,02 2 20 04

40 32 16 SXEIV040E 54,85 SXEIV040F 61,90 2 14 04

50 40 16 SXEIV050E 67,49 SXEIV050F 72,22 2 6 04

63 50 16 SXEIV063E 98,02 SXEIV063F 115,13 2 6 04

SXEFVTrue Union Ball Check Valve Easyfit with BS parallel socket threaded ends



box type

3/8” 10 16 SXEFV038E 38,49 SXEFV038F 40,57 2 30 04

1/2” 15 16 SXEFV012E 38,65 SXEFV012F 40,73 2 30 04

3/4” 20 16 SXEFV034E 45,63 SXEFV034F 46,54 2 30 04

1” 25 16 SXEFV100E 50,62 SXEFV100F 52,58 2 20 04

1” 1/4 32 16 SXEFV114E 60,83 SXEFV114F 67,87 2 14 04

1” 1/2 40 16 SXEFV112E 73,62 SXEFV112F 78,36 2 6 04

2” 50 16 SXEFV200E 115,99 SXEFV200F 133,09 2 6 04

50

SXE-SSE DN 10÷50PVC-UEASYFIT TRUE UNION BALL AND SPRING CHECK VALVE

SXELVTrue Union Ball Check Valve Easyfit with BS plain socket ends for solvent welding



box type

1/2” 15 16 SXELV012E 35,89 SXELV012F 37,96 2 30 04

3/4” 20 16 SXELV034E 41,48 SXELV034F 42,38 2 30 04

1” 25 16 SXELV100E 44,07 SXELV100F 46,02 2 20 04

1/4 32 16 SXELV114E 54,85 SXELV114F 61,90 2 14 04

1/2 40 16 SXELV112E 67,49 SXELV112F 72,22 2 6 04

2” 50 16 SXELV200E 98,02 SXELV200F 115,13 2 6 04

SSEIV - A316 SpringTrue Union Spring Check Valve Easyfit with metric plain socket ends for solvent welding



box type

16 10 16 SSEIV016E 31,33 SSEIV016F 33,15 2 30 03

20 15 16 SSEIV020E 31,45 SSEIV020F 33,26 2 30 04

25 20 16 SSEIV025E 36,36 SSEIV025F 37,14 2 30 04

32 25 16 SSEIV032E 38,61 SSEIV032F 40,33 2 20 04

40 32 16 SSEIV040E 48,06 SSEIV040F 54,24 2 14 04

50 40 16 SSEIV050E 59,14 SSEIV050F 63,30 2 6 04

63 50 16 SSEIV063E 85,91 SSEIV063F 100,88 2 6 04

51



E2.

17

SSEIV - Hastelloy SpringTrue Union Check Valve Easyfit with metric plain socket ends for solvent welding



box type

16 10 16 SSEIV016EH 93,56 SSEIV016FH 95,37 2 30 03

20 15 16 SSEIV020EH 93,70 SSEIV020FH 95,51 2 30 04

25 20 16 SSEIV025EH 101,86 SSEIV025FH 102,64 2 30 04

32 25 16 SSEIV032EH 100,27 SSEIV032FH 101,98 2 20 04

SSEIV - A316/PTFE encapsulated SpringTrue Union Check Valve Easyfit with metric plain socket ends for solvent welding



box type

40 32 16 SSEIV040E0P 67,84 SSEIV040F0P 74,03 2 14 04

50 40 16 SSEIV050E0P 79,98 SSEIV050F0P 84,12 2 6 04

63 50 16 SSEIV063E0P 114,26 SSEIV063F0P 129,25 2 6 04

52


SSEFV - A316 SpringTrue Union Spring Check Valve Easyfit with BS parallel socket threaded ends



box type

3/8” 10 16 SSEFV038E 33,73 SSEFV038F 35,56 2 30 04

1/2” 15 16 SSEFV012E 33,88 SSEFV012F 35,69 2 30 04

3/4” 20 16 SSEFV034E 40,00 SSEFV034F 40,78 2 30 04

1” 25 16 SSEFV100E 44,36 SSEFV100F 46,07 2 20 04

1” 1/4 32 16 SSEFV114E 53,31 SSEFV114F 59,48 2 14 04

1” 1/2 40 16 SSEFV112E 64,51 SSEFV112F 68,65 2 6 04

2” 50 16 SSEFV200E 101,65 SSEFV200F 116,64 2 6 04

SSEFV - Hastelloy SpringTrue Union Check Valve Easyfit with BS parallel socket threaded ends



box type

3/8” 10 16 SSEFV038EH 96,29 SSEFV038FH 98,11 2 30 04

1/2” 15 16 SSEFV012EH 96,47 SSEFV012FH 98,28 2 30 04

3/4” 20 16 SSEFV034EH 106,01 SSEFV034FH 106,79 2 30 04

1” 25 16 SSEFV100EH 106,82 SSEFV100FH 108,54 2 20 04

53



E2.

17

SSEFV - A316/PTFE encapsulated SpringTrue Union Check Valve Easyfit with BS parallel socket threaded ends



box type

1” 1/4 32 16 SSEFV114E0P 73,83 SSEFV114F0P 80,01 2 14 04

1” 1/2 40 16 SSEFV112E0P 86,10 SSEFV112F0P 90,25 2 6 04

2” 50 16 SSEFV200E0P 132,23 SSEFV200F0P 147,22 2 6 04

SSELV - A316 SpringEasyfit spring check valve with female ends for solvent welding, BS series



box type

3/8" 10 16 SSELV038E 31,32 SSELV038F 33,15 2 30 04

1/2” 15 16 SSELV012E 31,45 SSELV012F 33,26 2 30 04

3/4” 20 16 SSELV034E 36,36 SSELV034F 37,14 2 30 04

1” 25 16 SSELV100E 38,61 SSELV100F 40,33 2 20 04

1” 1/4 32 16 SSELV114E 48,06 SSELV114F 54,24 2 14 04

1” 1/2 40 16 SSELV112E 59,14 SSELV112F 63,30 2 6 04

2” 50 16 SSELV200E 85,91 SSELV200F 100,88 2 6 04

54


SSELV - Hastelloy SpringEasyfit spring check valve with female ends for solvent welding, BS series



box type

3/8" 10 16 SSELV038EH 93,55 SSELV038FH 95,37 2 30 04

1/2” 15 16 SSELV012EH 93,70 SSELV012FH 95,51 2 30 04

3/4” 20 16 SSELV034EH 101,86 SSELV034FH 102,64 2 30 04

1” 25 16 SSELV100EH 100,27 SSELV100FH 101,98 2 20 04

SSELV - A316/PTFE encapsulated SpringEasyfit spring check valve with female ends for solvent welding, BS series



box type

1” 1/4 32 16 SSELV114E0P 67,85 SSELV114F0P 74,03 2 14 04

1” 1/2 40 16 SSELV112E0P 79,99 SSELV112F0P 84,12 2 6 04

2” 50 16 SSELV200E0P 114,26 SSELV200F0P 129,25 2 6 04

Technical specificationsConstruction SXE: Easyfit True Union ball check valve with locked

carrier SXE: Easyfit True Union spring check valve with locked carrier

Size range DN 65 ÷ 100Nominal pressure PN 16 with water at 20 °CTemperature range 0 °C ÷ 60 °CCoupling standards Solvent welding: EN ISO 1452, EN ISO 15493, BS

4346-1, DIN 8063, NF T54-028, ASTM D 2467, JIS K 6743. Pipe coupling capacity according to EN ISO 1452, EN ISO 15493, DIN 8062, NF T54-016, ASTM D 1785, JIS K 6741Thread: ISO 228-1, DIN 2999, ASTM D 2464, JIS B 0203


Valve material PVC-USeal material EPDM, FPM (standard size O-Ring) Spring material (SSE) Available in STAINLESS Steel 316, A316 PTFE

encapsulated

SXE-SSE

EASYFIT TRUE UNION BALL AND SPRING CHECK VALVE• Connection system for solvent weld and threaded joints • Valve material compatibility (PVC-U) with water, drinking water and oth-

er food substance conveyance according to current regulations • PN16 True Union valve body made for PVC-U injection moulding and

compliant with European Directive 97/23/EC for PED pressurised equip-ment. Test requirements compliant with ISO 9393

• Easy radial dismounting and fully interchangeable with VEE and VXE 65-100 valve models

• Union nut profile that perfectly adapts to the Easyfit multifunctional han-dle hooked insert (available as an accessory) that lets you control union nut rotation

• Vertical (preferable for SXE model) and horizontal installation potential

DN 65÷100The Easyfit check valve line developed with Giugiaro Design offers two different versions: SXE with ball shutter and SSE with spring loaded shutter. Easyfit check valves stand out for the innovative installation method that guarantees reliable service over time.This valve is alsoequipped with acustomisableLabelling System.

55

E2.

17

1 Customisable Labelling System: built-in LCE module on the valve body made up of transparent protection plug and customisable tag holder using the LSE set (available as accessory). The customisation potential lets you identify the valve on the system according to specific needs

2 Optimised dynamic fluid design: energy savings due to the improved valve Kv value and consequent reduced pressure drop

3 High surface finish ball shutter: reduced wear, longer working life and reduced valve maintenance. Ideal to convey dirty fluids, even with suspended fluids or filaments, thanks to the special design that permits internal valve self-cleaning

4 Locked ball seat carrier: safe dismounting for maintenance with the Easyfit multifunctional handle

5 Ideal for horizontal installations: perfect seal even with low back pressure.

Silent and durable even with strong vibrations and pulsating fluid

6 PVC-U shutter and springs available in STAINLESS Steel 316, A316 PTFE encapsulated: maximum reliability in a wide field of applications from salt water to aggressive acids

2

3

1SXE SSE

6

5

4

56

57



E2.

17

SXEIVTrue Union Ball Check Valve Easyfit with metric plain socket ends for solvent welding



box type

75 65 16 SXEIV075E 225,97 SXEIV075F 241,79 - 1 05

90 80 16 SXEIV090E 283,46 SXEIV090F 301,58 - 1 05

110 100 16 SXEIV110E 371,98 SXEIV110F 410,31 - 1 03

SXEFVTrue Union Ball Check Valve Easyfit with BS parallel socket threaded ends



box type

2” 1/2 65 16 SXEFV212E 257,45 SXEFV212F 273,26 - 1 05

3” 80 16 SXEFV300E 322,21 SXEFV300F 340,32 - 1 05

4” 100 16 SXEFV400E 391,93 SXEFV400F 430,27 - 1 03

SXELVTrue Union Ball Check Valve Easyfit with BS plain socket ends for solvent welding



box type

2” 1/2 65 16 SXELV212E 225,97 SXELV212F 241,78 - 1 05

3” 80 16 SXELV300E 283,46 SXELV300F 301,58 - 1 05

4” 100 16 SXELV400E 371,98 SXELV400F 410,31 - 1 03

58


SXEAVTrue Union Ball Check Valve Easyfit with ASTM plain socket ends for solvent welding



box type

2” 1/2 65 16 SXEAV212E 225,97 SXEAV212F 241,79 - 1 05

3” 80 16 SXEAV300E 283,46 SXEAV300F 301,58 - 1 05

4” 100 16 SXEAV400E 371,98 SXEAV400F 410,31 - 1 03

SXEBEVTrue Union Ball Check Valve Easyfit with PE100 SDR11 metric series long spigot ends (CVDE) for butt fusion or electrofusion



box type

75 65 16 SXEBEV075E 264,39 SXEBEV075F 275,63 - 1 04

90 80 16 SXEBEV090E 331,65 SXEBEV090F 343,80 - 1 04

110 100 16 SXEBEV110E 435,22 SXEBEV110F 467,76 - 1 03

SSEIV - A316 SpringTrue Union Check Valve Easyfit with metric plain socket ends for solvent welding



box type

75 65 16 SSEIV075E 198,03 SSEIV075F 211,89 - 1 05

90 80 16 SSEIV090E 248,41 SSEIV090F 264,29 - 1 05

110 100 16 SSEIV110E 325,99 SSEIV110F 359,58 - 1 03

59



E2.

17

SSEIV - A316/PTFE encapsulated SpringTrue Union Check Valve Easyfit with metric plain socket ends for solvent welding



box type

75 65 16 SSEIV075E0P 245,56 SSEIV075F0P 251,74 - 1 05

90 80 16 SSEIV090E0P 305,81 SSEIV090F0P 309,94 - 1 05

110 100 16 SSEIV110E0P 385,76 SSEIV110F0P 400,75 - 1 03

SSEFV - A316 SpringTrue Union Check Valve Easyfit with BS parallel socket threaded ends



box type

2” 1/2 65 16 SSEFV212E 225,62 SSEFV212F 239,47 - 1 05

3” 80 16 SSEFV300E 282,36 SSEFV300F 298,24 - 1 05

4” 100 16 SSEFV400E 343,47 SSEFV400F 377,06 - 1 03

SSEFV - A316/PTFE encapsulated SpringTrue Union Check Valve Easyfit with BS parallel socket threaded ends



box type

2” 1/2 65 16 SSEFV212E0P 283,23 SSEFV212F0P 283,23 - 1 05

3” 80 16 SSEFV300E0P 348,69 SSEFV300F0P 348,69 - 1 05

4” 100 16 SSEFV400E0P 420,70 SSEFV400F0P 420,70 - 1 03

60


SSELV - A316 SpringTrue Union Check Valve Easyfit with BS plain socket ends for solvent welding



box type

2” 1/2 65 16 SSELV212E 198,03 SSELV212F 211,89 - 1 05

3” 80 16 SSELV300E 248,41 SSELV300F 264,29 - 1 05

4” 100 16 SSELV400E 325,99 SSELV400F 359,58 - 1 03

SSELV - A316/PTFE encapsulated SpringTrue Union Check Valve Easyfit with BS plain socket ends for solvent welding



box type

2” 1/2 65 16 SSELV212E0P 245,56 SSELV212F0P 251,75 - 1 05

3” 80 16 SSELV300E0P 305,81 SSELV300F0P 309,95 - 1 05

4” 100 16 SSELV400E0P 385,76 SSELV400F0P 400,75 - 1 03

SSEAV - A316 SpringTrue Union Check Valve Easyfit with ASTM plain socket ends for solvent welding



box type

2” 1/2 65 16 SSEAV212E 198,03 SSEAV212F 211,89 - 1 05

3” 80 16 SSEAV300E 248,41 SSEAV300F 264,29 - 1 05

4” 100 16 SSEAV400E 325,99 SSEAV400F 359,58 - 1 03

61



E2.

17

SSEAV - A316/PTFE encapsulated SpringTrue Union Check Valve Easyfit with ASTM plain socket ends for solvent welding



box type

2” 1/2 65 16 SSEAV212E0P 245,56 SSEAV212F0P 251,75 - 1 05

3” 80 16 SSEAV300E0P 305,81 SSEAV300F0P 309,95 - 1 05

4” 100 16 SSEAV400E0P 385,76 SSEAV400F0P 400,75 - 1 03

SSEBEV - A316 SpringTrue Union Check Valve Easyfit with PE100 SDR11 metric series long spigot ends (CVDE) for butt fusion or electrofusion



box type

75 65 16 SSEBEV075E 231,69 SSEBEV075F 241,55 - 1 05

90 80 16 SSEBEV090E 290,64 SSEBEV090F 301,29 - 1 05

110 100 16 SSEBEV110E 381,40 SSEBEV110F 409,91 - 1 03

SSEBEV - A316/PTFE encapsulated SpringTrue Union Check Valve Easyfit with PE100 SDR11 metric series long spigot ends (CVDE) for butt fusion or electrofusion



box type

75 65 16 SSEBEV075E0P 287,32 SSEBEV075F0P 287,00 - 1 05



Technical specificationsConstruction Bi-directional centric butterfly valveSize range DN 40 ÷ 200Nominal pressure Wafer version

DN 40÷50: PN 16 with water at 20 °CDN 65÷200: PN 10 with water at 20 °C

Temperature range 0 °C ÷ 60 °CCoupling standards Flanging system: EN ISO 1452, EN ISO 15493, DIN

2501, ISO 7005-1, EN 1092-1, ASTM B16.5 Cl.150

Reference standards Construction criteria: EN ISO 16136, EN ISO 1452, EN ISO 15493Test methods and requirements: ISO 9393Actuator couplings: ISO 5211

Valve material Body: PVC-U Disk: PVC-UStem: Zinc plated carbon steel (C45). On request STAINLESS steel AISI 316

Seal material Liner: EPDM, FPM. On request NBRControl options Hand lever operated; Gearbox, pneumatic actuator,

electric actuator

FE

The FE is a butterfly valve for shutting off or regulating flow, specifically designed for water applications and equipped with a customisable Labelling System.

BUTTERFLY VALVE

• Disk in PVC-U with through shaft • Zinc plated square section steel stem completely isolated from the fluid

complying with standard ISO 5211: DN 40 ÷ 65: 11 mm DN 80 ÷ 100: 14 mm DN 125 ÷ 150: 17 mm DN 200: 22 mm• Can also be installed as an end line valve, bottom discharge valve or tank

dump valve • The wafer valve can be transformed into a one-way Lug body valve

thanks to the set of zinc plated steel inserts available as an optional extra • Valve material compatibility (PVC-U) with water conveyance, drinking

water and other food substances according to current regulations • Possibility of directly installing a gearbox or pneumatic and/or electric

actuators with a standard drilling pattern according to standard ISO 5211 F05, F07, F10

DN 40÷200

62

63

FE DN 40÷200PVC-U

BUTTERFLY VALVE

E2.

17

FEOV/LMHand operated butterfly valve



box type

50 - 1"1/2 40 16 FEOVLM050E 83,43 FEOVLM050F 146,15 1 6 03

63 - 2" 50 16 FEOVLM063E 88,02 FEOVLM063F 154,10 1 6 03

75 - 2"1/2 65 10 FEOVLM075E 90,59 FEOVLM075F 158,88 1 5 02

90 - 3" 80 10 FEOVLM090E 103,93 FEOVLM090F 190,06 1 5 02

110 - 4" 100 10 FEOVLM110E 115,84 FEOVLM110F 236,07 1 5 02

*125 - 5" 125 10 FEOVLM140E 131,39 FEOVLM140F 308,84 1 4 02

*140 - 5" 125 10 FEOVLM140E 131,39 FEOVLM140F 380,84 1 4 02

160 - 6" 150 10 FEOVLM160E 161,08 FEOVLM160F 446,17 1 4 02

**200 - 8" 200 10 FEOVLM225E 283,62 FEOVLM225F 601,67 - 2 02

**225 - 8" 200 10 FEOVLM225E 283,62 FEOVLM225F 601,67 - 2 02

Note: for d75÷d225 NBR primary liner available, see ER Price List* d125, FEOV d140 with special QPV FE-FK d125 for butterfly valve (QPV125FKE), see E3 Price List

** d200, FEOV d225 with special QPV FE-FK d200 for butterfly valve (QPV200FKE), see E3 Price List

FEOV/RMGearbox operated butterfly valve



box type

75 - 2"1/2 65 10 FEOVRM075E 331,85 FEOVRM075F 400,13 - 1 04

90 - 3" 80 10 FEOVRM090E 345,20 FEOVRM090F 432,07 - 1 04

110 - 4" 100 10 FEOVRM110E 357,10 FEOVRM110F 478,10 - 1 04

*125 - 5" 125 10 FEOVRM140E 373,42 FEOVRM140F 555,10 - 1 02

*140 - 5" 125 10 FEOVRM140E 373,42 FEOVRM140F 555,10 - 1 02

160 - 6" 150 10 FEOVRM160E 403,12 FEOVRM160F 688,17 - 1 02

**200 - 8" 200 10 FEOVRM225E 585,00 FEOVRM225F 973,24 - 1 02

**225 - 8" 200 10 FEOVRM225E 585,00 FEOVRM225F 973,24 - 1 02

Note: for d75÷d225 NBR primary liner available, see ER Price List* d125, FEOV d140 with special QPV FE-FK d125 for butterfly valve (QPV125FKE), see E3 Price List

** d200, FEOV d225 with special QPV FE-FK d200 for butterfly valve (QPV200FKE), see E3 Price List

Technical specificationsConstruction Bi-directional centric butterfly valveSize range DN 40÷400Nominal pressure Wafer version

DN 40÷50: PN 16 with water at 20° CDN 65÷250: PN 10 with water at 20° CDN 300: PN 8 with water at 20° CDN 350: PN 7 with water at 20° CDN 400: PN 6 with water at 20° CLug version DN 65÷200: PN 10 with water at 20° CDN 250÷300: PN 6 with water at 20° C

Temperature range 0 °C ÷ 60 °CCoupling standards Flanging system: EN ISO 1452, EN ISO 15493, DIN

2501, ISO 7005-1, EN 1092-1, ASTM B16.5 Cl.150

Reference standards Construction criteria: EN ISO 16136, EN ISO 1452, EN ISO 15493Test methods and requirements: ISO 9393Actuator couplings: ISO 5211

Valve material Body: PP-GRDisk: PVC-UStem: STAINLESS steel AISI 316

Seal material Liner: EPDM, FPM. On request NBRControl options Hand lever operated (DN 40÷200); Gearbox,

pneumatic actuator, electric actuator

FK

BUTTERFLY VALVE

• Interchangeable disk in PVC-U with through shaft, available in different thermoplastic materials: PP-H, PVC-C, ABS, PVDF

• Overall dimensions of the valve in accordance with standard ISO 5752 (DN 40÷200 Medium Series 25, DN 250÷ 300 Long Series 16) and DIN 3202 K2 and ISO 5752 (DN 65÷200 K2, DN 250÷300 K3)

• Can also be installed as an end line valve, bottom discharge valve or tank dump valve

• Special Lug version PN 10 fully drilled to DIN 2501 or ANSI B16.5 cl.150 with molded-in AISI 316 stainless steel threaded inserts

• Valve material compatibility (PVC-U + EPDM) with water conveyance, drinking water and other food substances according to current regulations

• Possibility of installing a manual reducer or pneumatic and/or electric ac-tuators by applying an ISO standard drilling PP-GR flanges. DN 40 ÷ 200 valve fitted with plate with rack in PP-GR. For actuated versions with flange drilled according to ISO 5211 F05, F07, F10. DN 250÷400 valve, fitted with one-piece top flange in high mechanical strength PP-GR with mounting flange for internal components drilled according to standard ISO 5211 F10 (excluding DN 350÷400), F12, F14.

DN 40÷400The FK is a butterfly valve for shutting off or regulating flow, with structural characteristics that make it ideal for industrial applications requiring high performance and long-term reliability. This valve is also equipped with the customisable Labelling System.

64

1 Ergonomic handle in HIPVC equipped with locking and unlocking device, release, quick operation and graduated adjustment in 10 intermediate positions (DN 40÷200). The operating range, starting from the first few degrees of valve opening, also guarantees extremely low pressure drops.

2 Customisable Labelling System: integrated module in the handle, made of a transparent protection plug and a customisable tag holder using the LSE set (available as an accessory). The customisation lets you identify the valve on the system according to specific needs.

3 STAINLESS steel square section stem completely isolated from the fluid complying with standard

ISO 5211: DN 40÷65: 11 mm DN 80÷100: 14 mm DN 125÷150: 17 mm DN 200: 22 mm DN 250÷400: 27 mm

4 Body in polypropylene based compound reinforced with fibreglass (PP-GR) resistant to UV rays and characterised by high mechanical strength.

5 Drilling pattern using oval slots that allow coupling to flanges according to numerous

international standards. The special self-centring inserts in ABS supplied for DN 40÷200 guarantee the correct axial alignment of the valve during installation.

For DN 250÷400 valves, the drilling pattern for the self-centring system is of the traditional type according to DIN and ANSI standards.

6 Interchangeable liner with the dual function of forming a hydraulic seal and isolating the body from the fluid.

2

3

1

4 5

6

65

E2.

17

66

FK DN 40÷400PVC-UBUTTERFLY VALVE

FKOV/LMHand operated Butterfly valve



box type

50 - 1"1/2 40 16 FKOVLM050E 177,95 FKOVLM050F 263,14 1 6 03

63 - 2" 50 16 FKOVLM063E 188,41 FKOVLM063F 278,62 1 6 03

75 - 2"1/2 65 10 FKOVLM075E 209,34 FKOVLM075F 309,57 1 6 02

90 - 3" 80 10 FKOVLM090E 219,73 FKOVLM090F 324,41 1 6 02

110 - 4" 100 10 FKOVLM110E 239,05 FKOVLM110F 351,14 1 5 02

*125 - 5" 125 10 FKOVLM140E 317,72 FKOVLM140F 469,92 1 4 02

*140 - 5" 125 10 FKOVLM140E 317,72 FKOVLM140F 469,92 1 4 02

160 - 6" 150 10 FKOVLM160E 342,98 FKOVLM160F 491,44 1 4 02

**200 - 8" 200 10 FKOVLM225E 443,95 FKOVLM225F 637,71 1 2 02

**225 - 8" 200 10 FKOVLM225E 443,95 FKOVLM225F 637,71 1 2 02

Note: for d75÷d225 NBR primary liner available, see ER Price List* d125, FKOV d140 with special QPV FE-FK d125 for butterfly valve (QPV125FKE), see E3 Price List

** d200, FKOV d225 with special QPV FE-FK d200 for butterfly valve (QPV200FKE), see E3 Price List

FKOV/LM LUG ISO-DINHand operated Butterfly valve, version Lug ISO-DIN



box type

75 65 10 FKOLVLM075E 301,39 FKOLVLM075F 401,62 1 6 02



*125 125 10 FKOLVLM140E 492,18 FKOLVLM140F 644,36 1 4 02

*140 125 10 FKOLVLM140E 492,18 FKOLVLM140F 644,36 1 4 02


**200 200 10 FKOLVLM225E 639,16 FKOLVLM225F 832,95 1 2 02

**225 200 10 FKOLVLM225E 639,16 FKOLVLM225F 832,95 1 2 02



67

FK DN 40÷400PVC-U

BUTTERFLY VALVE

E2.

17

FKOV/LM LUG ANSIHand operated Butterfly valve, version Lug ANSI



box type

2” 1/2 65 10 FKOALVLM212E 347,43 FKOALVLM212F 447,65 1 6 02

3” 80 10 FKOALVLM300E 388,25 FKOALVLM300F 492,92 1 6 02





68


FKOV/FMButterfly valve with bare shaft



box type

50 - 1"1/2 40 16 FKOVFM050E 151,46 FKOVFM050F 236,64 1 6 03

63 - 2" 50 16 FKOVFM063E 160,36 FKOVFM063F 250,57 1 6 03

75 - 2"1/2 65 10 FKOVFM075E 178,17 FKOVFM075F 278,38 1 6 02

90 - 3" 80 10 FKOVFM090E 193,78 FKOVFM090F 298,44 1 6 02

110 - 4" 100 10 FKOVFM110E 210,08 FKOVFM110F 322,94 1 5 02

*125 - 5" 125 10 FKOVFM140E 279,15 FKOVFM140F 432,07 1 4 02

*140 - 5" 125 10 FKOVFM140E 279,15 FKOVFM140F 432,07 1 4 02

160 - 6" 150 10 FKOVFM160E 308,84 FKOVFM160F 466,96 1 4 02

**200 - 8" 200 10 FKOVFM225E 399,41 FKOVFM225F 605,78 1 2 02

**225 - 8" 200 10 FKOVFM225E 399,41 FKOVFM225F 605,78 1 2 02

250 ***250 10 FKOVFM280E 1.273,34 FKOVFM280F 2.139,04 - 1 08

280 ***250 10 FKOVFM280E 1.273,34 FKOVFM280F 2.139,04 - 1 08

315 300 8 FKOVFM315E 1.388,42 FKOVFM315F 2.332,09 - 1 08

355 350 7 FKOVFM355E 2.366,23 FKOVFM355F 4.339,50 - 1 00

400 400 6 FKOVFM400E 2.693,46 FKOVFM400F 5.544,00 - 1 00

10" ****250 10 FKOAVFM810E 1.273,34 FKOAVFM810F 2.139,04 - 1 08

12" ****300 8 FKOAVFM812E 1.388,42 FKOAVFM812F 2.332,09 - 1 08

14" 350 7 FKOAVFM814E 2.366,23 FKOAVFM814F 4.339,50 - 1 00

16" 400 6 FKOAVFM816E 2.693,46 FKOAVFM816F 5.544,00 - 1 00


** d200, FKOV d225 with special QPV FE-FK d200 for butterfly valve (QPV200FKE), see E3 Price List***ISO-DIN

****ANSI B.16.5 cl.150

69

FK DN 40÷400PVC-U

BUTTERFLY VALVE

E2.

17

FKOV/FM LUG ISO-DINButterfly valve with bare shaft, version Lug ISO-DIN



box type

75 65 10 FKOLVFM075E 270,24 FKOLVFM075F 370,42 1 6 02



*125 125 10 FKOLVFM140E 453,61 FKOLVFM140F 606,53 1 4 02

*140 125 10 FKOLVFM140E 453,61 FKOLVFM140F 606,53 1 4 02


**200 200 10 FKOLVFM225E 594,64 FKOLVFM225F 800,99 1 2 02

**225 200 10 FKOLVFM225E 594,64 FKOLVFM225F 800,99 1 2 02



FKOV/FM LUG ANSIButterfly valve with bare shaft, version Lug ANSI



box type

2” 1/2 65 10 FKOALVFM212E 316,24 FKOALVFM212F 416,45 1 6 02

3” 80 10 FKOALVFM300E 362,28 FKOALVFM300F 466,96 1 6 02





10” 250 6 FKOALVFM810E 2.209,29 FKOALVFM810F 3.075,00 - 1 08

12” 300 6 FKOALVFM812E 2.345,85 FKOALVFM812F 3.289,52 - 1 08

Note: for d 2 1/2” - d 8” NBR primary liner available, see ER Price List

70


FKOV/RMGearbox operated Butterfly valve



box type

50 40 16 FKOVRM050E 481,09 FKOVRM050F 566,26 - 1 04

63 40 16 FKOVRM063E 489,99 FKOVRM063F 580,19 - 1 04

75 - 2"1/2 65 10 FKOVRM075E 507,81 FKOVRM075F 608,00 - 1 04

90 - 3" 80 10 FKOVRM090E 518,91 FKOVRM090F 623,57 - 1 04

110 - 4" 100 10 FKOVRM110E 537,47 FKOVRM110F 649,57 - 1 04

*125 - 5" 125 10 FKOVRM140E 616,18 FKOVRM140F 768,35 - 1 02

*140 - 5" 125 10 FKOVRM140E 616,18 FKOVRM140E 616,18 - 1 02

160 - 6" 150 10 FKOVRM160E 641,42 FKOVRM160F 789,90 - 1 02

**200 - 8" 200 10 FKOVRM225E 809,92 FKOVRM225F 1.003,71 - 1 02

**225 - 8" 200 10 FKOVRM225E 809,92 FKOVRM225F 1.003,71 - 1 02

250 ***250 10 FKOVRM280E 1.485,69 FKOVRM280F 2.343,98 1 1 08

280 ***250 10 FKOVRM280E 1.485,69 FKOVRM280F 2.343,98 1 1 08

315 ***300 8 FKOVRM315E 1.600,78 FKOVRM315F 2.543,70 1 1 08

355 350 7 FKOVRM355E 2.916,23 FKOVRM355F 4.889,50 1 1 00

400 400 6 FKOVRM400E 3.243,46 FKOVRM400F 6.094,00 1 1 00

10" ****250 10 FKOAVRM810E 1.485,69 FKOAVRM810F 2.343,98 1 1 08

12" ****300 8 FKOAVRM812E 1.600,78 FKOAVRM812F 2.543,70 1 1 08

14" 350 7 FKOAVRM814E 2.916,23 FKOAVRM814F 4.889,50 1 1 00

16" 400 6 FKOAVRM816E 3.243,46 FKOAVRM816F 6.094,00 1 1 00


** d200, FKOV d225 with special QPV FE-FK d200 for butterfly valve (QPV200FKE), see E3 Price List***ISO-DIN

****ANSI B.16.5 cl.150

71

FK DN 40÷400PVC-U

BUTTERFLY VALVE

E2.

17

FKOV/RM LUG ISO-DINGearbox operated Butterfly valve, version Lug ISO-DIN



box type

75 65 10 FKOLVRM075E 599,85 FKOLVRM075F 700,07 1 1 04

90 80 10 FKOLVRM090E 639,16 FKOLVRM090F 743,83 1 6 02

110 100 10 FKOLVRM110E 668,12 FKOLVRM110F 780,23 - 1 04

*125 125 10 FKOLVRM140E 790,63 FKOLVRM140F 942,81 1 1 02

*140 125 10 FKOLVRM140E 790,63 FKOLVRM140F 942,81 1 1 02

160 150 10 FKOLVRM160E 829,98 FKOLVRM160F 978,44 - 1 02

**200 200 10 FKOLVRM225E 1.005,15 FKOLVRM225F 1.198,94 - 1 02

**225 200 10 FKOLVRM225E 1.005,15 FKOLVRM225F 1.198,94 - 1 02



FKOV/RM LUG ANSIGearbox operated Butterfly valve, version Lug ANSI



box type

2” 1/2 65 10 FKOALVRM212E 645,87 FKOALVRM212F 746,09 1 1 04

3” 80 10 FKOALVRM300E 687,42 FKOALVRM300F 792,10 1 1 04

4” 100 10 FKOALVRM400E 720,83 FKOALVRM400F 832,95 - 1 04

5” 125 10 FKOALVRM500E 860,41 FKOALVRM500F 1.012,60 1 1 02

6” 150 10 FKOALVRM600E 905,70 FKOALVRM600F 1.054,16 1 1 02

8” 200 10 FKOALVRM800E 1.102,37 FKOALVRM800F 1.296,15 1 1 02

10” 250 6 FKOALVRM810E 2.421,68 FKOALVRM810F 3.279,97 - 1 08

12” 300 6 FKOALVRM812E 2.558,17 FKOALVRM812F 3.501,11 - 1 08

Note: for d 2 1/2” - d 8” NBR primary liner available, see ER Price List

Technical specificationsConstruction Diaphragm valve with maximized flow rate and

DIALOCK® lockable handwheelSize range DN 15 ÷ 65Nominal pressure PN 10 with water at 20° CTemperature range 0 °C ÷ 60 °CCoupling standards Solvent welding: EN ISO 1452, EN ISO 15493,

BS 4346-1, DIN 8063, NF T54-028, ASTM D 2467.Can be coupled to pipes according to EN ISO 1452, EN ISO 15493, DIN 8062, NF T54-016, ASTM D 1785

Thread: ISO 228-1, DIN 2999, ASTM D 2464, Flanging system: ISO 7005-1, EN ISO 1452, EN ISO 15493, EN 558-1, DIN 2501, ANSI B16.5 Cl.150, JIS B2220


Valve material Body: PVC-UBonnet and handwheel: PP-GRPosition indicator cap: PVC

Diaphragm material EPDM, FPM, PTFE (on request NBR)Control options Manual control; pneumatic actuator

DK

The DK DIALOCK® diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing the flow rate and ensuring an optimum linearity of the flow adjustment curve. The DK is extremely compact and very light. The innovative handwheel is equipped with a patented immediate and ergonomic operating locking device that allows it to be adjusted and locked in any position.

DIALOCK® 2-WAY DIAPHRAGM VALVE

• Connection system for solvent weld, threaded and flanged joints • Optimised fluid dynamic design: maximum output flow rate thanks to the

optimised efficiency of the fluid dynamics that characterise the new internal geometry of the body

• Internal components in metal, totally isolated from the fluid and external environment

• Modularity of the range: only 2 handwheel and 4 diaphragm and bonnet sizes for 7 different valve sizes

• Non-rising handwheel that stays at the same height during rotation, equipped with a graduated optical indicator protected by a transparent PVC cap with seal O-Ring

• Bonnet fastening screws in stainless steel protected against the external en-vironment by PE plugs. Absence of metal parts exposed to the external envi-ronment to prevent any risk of corrosion

• CDSA (Circular Diaphragm Sealing Angle) system that, thanks to the uniform distribution of shutter pressure on the diaphragm seal, offers the following advantages:- reduction in the tightening torque of the screws fixing the actuator to the

valve body- reduced mechanical stress on all valve components (actuator, body and di-

aphragm)- easy to clean valve interior- low risk of the accumulation of deposits, contamination or damage to the

diaphragm due to crystallisation- operating torque reduction

DN 15÷65

72

1 High visibility graduated optical position indicator protected by a transparent cap with seal O-Ring

2 Customisation plate: the customisation lets you identify the valve on the system according to specific needs

3 DIALOCK® SYSTEM: innovative handwheel with a patented immediate and ergonomic operating locking device that allows it to be adjusted and locked in over 300 positions

4 Handwheel and bonnet in high mechanical strength and chemically resistant PP-GR, providing full protection by isolating all internal metal parts from contact with external agents

5 Floating pin connection between the control screw and diaphragm to prevent concentrated loads, improve the seal and extend its lifetime

6 New design of valve body interior: substantially increased flow coefficient and reduced pressure drop. The degree of efficiency reached has also enabled the size and weight of the valve to be reduced

7 Adjustment linearity: the internal profiles of the valve also greatly improve its characteristic curve, resulting in extremely sensitive and precise adjustment along the entire stroke of the shutter

8 Valve anchoring bracket integrated in the body, with threaded metal inserts allowing simple panel or wall mounting using the PMDK mounting plate (supplied as an accessory)

3

4

7

12

6

8

5

73

E2.

17

74

DK DN 15÷65PVC-UDIALOCK® 2-WAY DIAPHRAGM VALVE

DKDVDIALOCK® diaphragm valve with male ends for solvent welding, metric series


code € PTFE code € pack n./

boxbox

type20 15 10 DKDV020E 47,82 DKDV020F 84,79 DKDV020P 99,27 1 8 03

25 20 10 DKDV025E 53,25 DKDV025F 89,32 DKDV025P 103,72 1 8 03






DKLDVDIALOCK® diaphragm valve with stroke limiter and male ends for solvent welding, metric series



boxbox

type20 15 10 DKLDV020E 119,92 DKLDV020F 156,89 DKLDV020P 171,37 1 8 03

25 20 10 DKLDV025E 125,35 DKLDV025F 161,42 DKLDV025P 175,82 1 8 03






75

DK DN 15÷65PVC-U


E2.

17

DKUIVDIALOCK® diaphragm valve with female union ends for solvent welding, metric series



boxbox

type20 15 10 DKUIV020E 57,76 DKUIV020F 96,50 DKUIV020P 115,45 1 8 03

25 20 10 DKUIV025E 63,19 DKUIV025F 106,47 DKUIV025P 124,51 1 8 03





DKLUIVDIALOCK® diaphragm valve with stroke limiter and female union ends for solvent welding, metric series



boxbox

type20 15 10 DKLUIV020E 129,86 DKLUIV020F 168,60 DKLUIV020P 187,55 1 8 03

25 20 10 DKLUIV025E 135,29 DKLUIV025F 178,57 DKLUIV025P 196,61 1 8 03





76


DKUFVDIALOCK® diaphragm valve with BSP threaded female union ends



boxbox

type1/2" 15 10 DKUFV012E 63,19 DKUFV012F 101,93 DKUFV012P 120,87 1 8 03

3/4" 20 10 DKUFV034E 68,53 DKUFV034F 112,77 DKUFV034P 129,92 1 8 03

1" 25 10 DKUFV100E 83,89 DKUFV100F 127,17 DKUFV100P 145,21 1 4 04

1" 1/4 32 10 DKUFV114E 110,92 DKUFV114F 181,28 DKUFV114P 200,22 1 4 03

1" 1/2 40 10 DKUFV112E 147,96 DKUFV112F 221,88 DKUFV112P 242,63 1 2 04

2" 50 10 DKUFV200E 176,76 DKUFV200F 295,83 DKUFV200P 291,31 1 4 02

DKLUFV version available on request

DKUAVDIALOCK® diaphragm valve with female union ends for solvent welding, ASTM series



boxbox

type1/2" 15 10 DKUAV012E 63,19 DKUAV012F 101,93 DKUAV012P 120,87 1 8 03

3/4" 20 10 DKUAV034E 68,53 DKUAV034F 112,77 DKUAV034P 129,92 1 8 03

1" 25 10 DKUAV100E 83,89 DKUAV100F 127,17 DKUAV100P 145,21 1 4 04

1" 1/4 32 10 DKUAV114E 110,92 DKUAV114F 181,28 DKUAV114P 200,22 1 4 03

1" 1/2 40 10 DKUAV112E 147,96 DKUAV112F 221,88 DKUAV112P 242,63 1 2 04

2" 50 10 DKUAV200E 176,76 DKUAV200F 295,83 DKUAV200P 291,31 1 4 02

DKLUAV version available on request

77

DK DN 15÷65PVC-U


E2.

17

DKULVDIALOCK® diaphragm valve with female union ends for solvent welding, BS series



boxbox

type1/2" 15 10 DKULV012E 57,76 DKULV012F 96,50 DKULV012P 115,45 1 8 03

3/4" 20 10 DKULV034E 63,19 DKULV034F 106,47 DKULV034P 124,51 1 8 03

1" 25 10 DKULV100E 78,50 DKULV100F 122,74 DKULV100P 139,81 1 4 04

1" 1/4 32 10 DKULV114E 93,84 DKULV114F 164,15 DKULV114P 184,04 1 4 03

1" 1/2 40 10 DKULV112E 128,05 DKULV112F 202,98 DKULV112P 222,80 1 2 04

2" 50 10 DKULV200E 157,82 DKULV200F 276,90 DKULV200P 273,27 1 4 02

DKLULV version available on request

DKOVDIALOCK® diaphragm valve with fixed flanges, drilled PN10/16. Face to face according to EN 558-1



boxbox

type20 15 10 DKOV020E 79,11 DKOV020F 116,09 DKOV020P 130,55 1 4 03

25 20 10 DKOV025E 86,07 DKOV025F 122,15 DKOV025P 136,56 1 4 03



50 40 10 DKOV050E 153,36 DKOV050F 215,55 DKOV050P 231,80 - 1 04



DKLOV version available on request

78


DKOAVDIALOCK® diaphragm valve with fixed flanges, drilled ANSI B16.5 cl. 150 #FF



boxbox

type1/2" 15 10 DKOAV012E 79,11 DKOAV012F 116,09 DKOAV012P 130,55 1 4 03

3/4" 20 10 DKOAV034E 86,07 DKOAV034F 122,15 DKOAV034P 136,56 1 4 03

1" 25 10 DKOAV100E 99,17 DKOAV100F 136,14 DKOAV100P 151,49 1 2 04

1" 1/4 32 10 DKOAV114E 122,25 DKOAV114F 185,35 DKOAV114P 201,61 1 2 04

1" 1/2 40 10 DKOAV112E 153,36 DKOAV112F 215,55 DKOAV112P 231,80 - 1 04

2" 50 10 DKOAV200E 195,89 DKOAV200F 300,57 DKOAV200P 297,81 - 1 04

2" 1/2 *65 10 DKOV075E 254,65 DKOV075F 390,74 DKOV075P 387,15 - 1 03

DKLOAV version available on request*Flanges with oval holes matching both DIN and ANSI standards

Technical specificationsConstruction Single wear diaphragm valveSize range DN 80 ÷ 100

Nominal pressure PN 10 with water at 20° CPN 6 with water at 20° C (PTFE version)

Temperature range 0 °C ÷ 60 °CCoupling standards Solvent welding: EN ISO 1452, EN ISO 15493, BS 4346-1,

DIN 8063, NF T54-028, ASTM D 2467, JIS K 6743.Can be coupled to pipes according to EN ISO 1452, EN ISO 15493

Flanging system: ISO 7005-1, EN ISO 1452, EN ISO 15493, EN 558-1, DIN 2501, ANSI B16.5 Cl.150


Valve material Body: PVC-UBonnet: PP-GRHandwheel: PA-GR

Diaphragm material EPDM, FPM, PTFE (on request NBR)Control options Manual control; pneumatic actuator

VM

The VM is particularly suitable for shutting off and regulating abrasive or dirty fluids. The handwheel control and diaphragm seal provide precise and effective control, while reducing the risk of water hammer to a minimum.

DIAPHRAGM VALVE

• Connection system for solvent weld, threaded and flanged joints • Compact and lightweight construction• High flow coefficient and minimum pressure drop• Internal components in metal totally isolated from the conveyed fluid,

with anti-friction disk to reduce friction to a minimum• Handwheel that stays at the same height during rotation

DN 80÷100

79

E2.

17

1 Handwheel in (PA-GR) with high mechanical strength and ergonomic grip for optimum manageability

2 Metal optical position indicator supplied as standard

3 Full protection bonnet in PP-GR

Internal circular and symmetrical diaphragm sealing area

4 Diaphragm available in EPDM, FPM, PTFE (NBR on request) and easy to replace

5 Threaded metal inserts for anchoring the valve

1

3

5

2

4

80

81

VM DN 80÷100PVC-U

DIAPHRAGM VALVE

E2.

17

VMDVDiaphragm valve with metric spigot ends for solvent welding



boxbox

type90 80 *10 VMDV090E 380,95 VMDV090F 681,01 VMDV090P 523,03 - 1 03

110 100 *10 VMDV110E 528,61 VMDV110F 1.037,79 VMDV110P 704,24 - 1 02

*PTFE PN6

VMOVDiaphragm valve with PN 10/16 fixed flanges. Face to face according to EN 558-1



boxbox

type90 80 *10 VMOV090E 517,77 VMOV090F 817,84 VMOV090P 659,87 - 1 02

110 100 *10 VMOV110E 688,72 VMOV110F 1.197,91 VMOV110P 864,37 - 1 02

*PTFE PN6

VMOAVDiaphragm valve with ANSI B16.5 cl. 150 #FFfixed flanges**



boxbox

type3" 80 *10 VMOAV300E 517,77 VMOAV300F 817,84 VMOAV300P 659,87 - 1 02

4" **100 *10 VMOV110E 688,72 VMOV110F 1.197,91 VMOV110P 864,37 - 1 02

* PTFE: PN 6** with flanges drilled DIN-ANSI

Technical specificationsConstruction Compact single wear diaphragm valveSize range DN 12÷15Nominal pressure PN 6 with water at 20 °CTemperature range 0 °C ÷ 60 °CCoupling standards Solvent welding: EN ISO 1452, EN ISO 15493, BS 4346-

1, DIN 8063, NF T54-028, ASTM D 2467, JIS K 6743.Can be coupled to pipes according to EN ISO 1452, EN ISO 15493, DIN 8062, NF T54-016, ASTM T 1785, JIS K 6741



Valve material Body: PVC-UBonnet and handwheel: PA-GR

Diaphragm material EPDM, FPM, PTFEControl options Manual control; pneumatic actuator

CM

The CM is a manually operated diaphragm valve of reduced dimensions and particularly compact structure, ideal for use in confined spaces.

COMPACT DIAPHRAGM VALVE

• Connection system for solvent weld and threaded joints • Extremely compact construction • Internal operating components in metal totally isolated from the

conveyed fluid• Valve stem in STAINLESS steel • Compressor with floating diaphragm support• Easy to replace diaphragm seal• Corrosion-proof internal components• CDSA (Circular Diaphragm Sealing Angle) system offering the following

advantages:- uniform distribution of shutter pressure on the diaphragm seal- reduction in the tightening torque of the screws fixing the actuator to the

valve body- reduced mechanical stress on all valve components (actuator, body and

diaphragm)- easy to clean valve interior- low risk of the accumulation of deposits, contamination or damage to the

diaphragm due to crystallisation- operating torque reduction

DN 12÷15

82

1 Handwheel in PA-GR, completely sealed, high mechanical strength with ergonomic grip for optimum manageability

2 Integrated adjustable torque limiter designed to prevent excessive compression of the diaphragm and always guarantee a minimum fluid flow

3 Optical position indicator supplied as standard

4 Bonnet in PA-GR with STAINLESS steel nuts fully protected by plastic plugs to eliminate zones where impurities may accumulate. Internal circular and symmetrical diaphragm sealing area

5 STAINLESS steel bolts, can also be inserted from above

6 Threaded metal inserts for anchoring the valve

1

2

3

6

5

4

83

E2.

17

84

CM DN 12÷15PVC-UCOMPACT DIAPHRAGM VALVE

CMDVDiaphragm valve with metric plain spigot ends for solvent welding



boxbox

type20 15 6 CMDV020E 48,34 CMDV020F 68,74 CMDV020P 72,49 1 8 04

CMIVDiaphragm valve with metric plain socket ends for solvent welding



boxbox

type16 12 6 CMIV016E 39,94 CMIV016F 55,76 CMIV016P 63,17 1 8 04

20 15 6 CMIV020E 51,09 CMIV020F 63,17 CMIV020P 67,83 1 8 04

CMFVDiaphragm valve with BS parallel socket threaded ends



boxbox

type3/8” 12 6 CMFV038E 39,94 CMFV038F 55,76 CMFV038P 63,17 1 8 04

1/2” 15 6 CMFV012E 51,09 CMFV012F 63,17 CMFV012P 67,83 1 8 04

85

CM DN 12÷15PVC-U

COMPACT DIAPHRAGM VALVE

E2.

17

CMUIVDiaphragm valve with unionised metric plain socket ends for solvent welding


code € *PTFE code € pack n./

boxbox

type20 15 6 CMUIV020E 55,76 CMUIV020F 71,56 CMUIV020P 74,33 1 8 04

* Union O-rings in FPMNote: availalble on request threaded ends 1/2”BSP (CMUFV)

Technical specificationsConstruction VM: Mini-diaphragm valve

RM: diaphragm cock valveSize range VM: DN 8 (1/4”)

RM: DN 15

Nominal pressure VM: PN 10 with water at 20 °CRM: PN 4 with water at 20 °C

Temperature range 0 °C ÷ 60 °CCoupling standards Solvent welding: EN ISO 1452, EN ISO 15493.

Can be coupled to pipes according to EN ISO 1452, EN ISO 15493Thread: UNI ISO 228-1, DIN 2999


Valve material PVC-UDiaphragm material EPDMControl options Manual control

VM/RM

The VM mini-valve and RM diaphragm cock valve are both used to shut-off and regulate fluid flow and are characterised by their reduced size.

MINI-DIAPHRAGM VALVE

DIAPHRAGM COCK VALVE

• Connection system for solvent weld and threaded joints • Extremely compact dimensions • Can be installed in any position• Valve material compatibility (PVC-U) and elastomer seal elements

(EPDM), with water, drinking water and other food substances as per current regulations

• Specifically designed for laboratory applications or for sampling purposes

• Connection system for threaded joints • Can be installed in any position• Can be coupled to pipes in PVC-U, PVC-U plasticised, PE and rubber• Valve material compatibility (PVC-U) with water, drinking water and

other food substance conveyance according to current regulations • Specifically designed for laboratory applications or for sampling purposes

DN 8÷15

86

87

VM/RM DN 8÷15PVC-U

E2.

17MINI DIAPHRAGM VALVE AND DIAPHRAGM COCK VALVE

VMIVDiaphragm valve with metric plain socket ends for solvent welding


boxbox

type12 8 10 VMIV012E 28,06 - 70 05

VMFVMini-diaphragm valve with BSP threaded female ends


boxbox

type1/4” 8 10 VMFV014E 29,87 - 70 05

RMRPVDiaphragm cock with one BS parallel threaded spigot end and the other end for hose connection


boxbox

type1/2” 15 4 RMRPV012020E 21,26 - 50 05

88

VM/RM DN 8÷15PVC-UMINI DIAPHRAGM VALVE AND DIAPHRAGM COCK VALVE

RMRVDiaphragm cock male BS parallel threaded spigot ends


boxbox

type1/2” 15 4 RMRV012E 21,26 - 50 05

89

E2.

17

Technical specificationsConstruction Sediment strainerSize range DN 10÷100Nominal pressure PVC-U Grey

DN 10÷50: PN 16 with water at 20 °CDN 65: PN 10 with water at 20 °CDN 80÷100: PN 6 with water at 20 °C

PVC-U TransparentDN 10÷25: PN 16 with water at 20 °CDN 32÷50: PN 10 with water at 20 °CDN 65: PN 6 with water at 20 °CDN 80÷100: PN 4 with water at 20 °C

Temperature range 0 °C ÷ 60 °CCoupling standards Solvent welding: EN ISO 1452, EN ISO 15493, BS 43461,

DIN 8063, NF T54-028, ASTM D 2467, JIS K 6743. Can be coupled to pipes according to EN ISO 1452, EN ISO 15493, DIN 8062, NF T54-016, ASTM D 1785, JIS K 6741

Thread: UNI ISO 228-1, DIN 2999, ASTM D 2467, JIS B 0203

Flanging system:: ISO 7005-1, EN ISO 1452, EN ISO 15493, EN 558-1 (DN 10÷50), DIN 2501, ANSI B.16.5 cl.150, JIS B 2220

Reference standards Construction criteria: EN ISO 1452, EN ISO 15493,Test methods and requirements: ISO 9393Installation criteria: DVS 2204, DVS 2221, UNI 11242

Valve material Body: PVC-U grey or transparentStrainer: PVC-U or STAINLESS steel

Seal material EPDM or FPM

RV

The RV Sediment strainer limits the passage of any solid particles present in the fluid by means of a strainer.

SEDIMENT STRAINER

• Connection system for solvent weld, threaded and flanged joints • Strainer mounted on an easily removed support that facilitates the clean-

ing or replacement • Valve material compatibility (PVC-U) with water conveyance, drinking

water and other food substances according to current regulations• Can be maintained with the valve body installed

DN 10÷100

90

RV DN 10÷100PVC-USEDIMENT STRAINER

RVUIV-RVUITRVUIV gray PVC-U - RVUIT transparent PVC-U body. Sediment strainer with unionised metric plain socket ends for solvent welding

d DN PN RVUIV PN RVUIT RVUIV code € RVUIT


box type

16 10 16 16 RVUIV016E 26,80 RVUIT016E 26,80 2 20 04

20 15 16 16 RVUIV020E 26,80 RVUIT020E 26,80 2 20 04

25 20 16 16 RVUIV025E 31,00 RVUIT025E 31,00 2 10 04

32 25 16 16 RVUIV032E 42,22 RVUIT032E 42,22 2 10 04

40 32 16 10 RVUIV040E 53,45 RVUIT040E 53,45 2 6 04

50 40 16 10 RVUIV050E 69,97 RVUIT050E 69,97 2 6 03

63 50 16 10 RVUIV063E 91,09 RVUIT063E 91,09 2 6 02

Note 1: Standard filter screen is in PVC-U, pitch 1,5mmNote 2: for FPM version use the EPDM version + spare set in FPM SETRV...F

RVIV-RVITRVIV gray PVC-U - RVIT transparent PVC-U body. Sediment strainer with metric plain socket ends for solvent welding

d DN PN RVIV PN RVIT RVIV code € RVIT


box type

75 65 10 6 RVIV075E 118,45 RVIT075E 125,62 - 2 04

90 80 6 4 RVIV090E 141,23 RVIT090E 141,23 - 1 04

110 100 6 4 RVIV110E 332,63 RVIT110E 332,63 - 1 04


91

RV DN 10÷100PVC-U

SEDIMENT STRAINER

E2.

17

RVUFV-RVUFTRVUFV gray PVC-U - RVUFT transparent PVC-U body. Sediment strainer with unionised threaded socket union BS parallel series

R DN PN RVUFV PN RVUFT RVUFV code € RVUFT


box type

3/8” 10 16 16 RVUFV038E 34,41 RVUFT038E 34,41 2 20 04

1/2” 15 16 16 RVUFV012E 38,23 RVUFT012E 36,05 2 20 04

3/4” 20 16 16 RVUFV034E 45,38 RVUFT034E 47,65 2 10 04

1” 25 16 16 RVUFV100E 60,03 RVUFT100E 63,56 2 10 04

1” 1/4 32 16 10 RVUFV114E 76,16 RVUFT114E 79,52 2 6 04

1” 1/2 40 16 10 RVUFV112E 94,43 RVUFT112E 97,13 2 6 03

2” 50 16 10 RVUFV200E 116,24 RVUFT200E 125,33 2 6 02


RVFV-RVFTRVFV gray PVC-U - RVFT transparent PVC-U body. Sediment strainer with BS parallel threaded ends

R DN PN RVFV PN RVFT RVFV code € RVFT


box type

2” 1/2 65 10 6 RVFV212E 189,56 RVFT212E 195,13 - 2 04

3” 80 6 4 RVFV300E 237,03 RVFT300E 250,88 - 1 04

4” 100 6 4 RVFV400E 354,89 RVFT400E 360,45 - 1 04


92

RV DN 10÷100PVC-USEDIMENT STRAINER

RVDV-RVDTRVDV gray PVC-U - RVDT transparent PVC-U body. Sediment strainer with metric plain spigot ends for solvent welding

d DN PN RVDV PN RVDT RVDV code € RVDT


box type

16 10 16 10 RVDV016E 23,27 RVDT016E 24,17 2 20 04

20 15 16 10 RVDV020E 23,27 RVDT020E 24,17 2 20 04

25 20 16 10 RVDV025E 26,92 RVDT025E 28,00 2 20 04

32 25 16 10 RVDV032E 36,71 RVDT032E 38,18 2 20 04

40 32 16 10 RVDV040E 57,99 RVDT040E 48,35 2 12 04

50 40 16 10 RVDV050E 60,87 RVDT050E 63,30 2 6 04

63 50 16 10 RVDV063E 79,21 RVDT063E 82,38 2 6 03


93

E2.

17

Technical specificationsConstruction Angle seat shutting-off and regulating valve Size range DN 10 ÷ 50 Nominal pressure DN 10÷25: PN 16 with water at 20 °C

DN 32÷50: PN 10 with water at 20 °CTemperature range 0 °C ÷ 60 °CCoupling standards Solvent welding: EN ISO 1452, EN ISO 15493, BS 4346-

1, DIN 8063, NF T54-028, ASTM D 2467, JIS K 6743. Can be coupled to pipes according to EN ISO 1452, EN ISO 15493, DIN 8062, NF T54-016, ASTM D 1785, JIS K 6741


Flanging system: ISO 7005-1, EN ISO 1452, EN ISO 15493, EN 558-1 (DN 10÷50), DIN 2501, ANSI B16.5 Cl. 150, JIS B 2220

Reference standards Construction criteria: EN ISO 1452, EN ISO 15493Test methods and requirements: ISO 9393Installation criteria: DVS 2204, DVS 2221, UNI 11242

Valve material PVC-USeal material EPDM+PE (EPDM+PTFE or FPM+PTFE on request)Control options Manual control

VV

The VV angle seat valve isa shutting-off and regulating valve particularly suitable for clean fluids.

ANGLE SEAT VALVE

• Connection system for solvent weld, threaded and flanged joints • Can be installed in any position • No metal parts in contact with the fluid• Valve material compatibility (PVC-U) with water, drinking water and

other food substance conveyance according to current regulations • Can be maintained with the valve body installed

DN 10÷50

94

VV DN 10÷50PVC-UANGLE SEAT VALVE

VVUIVAngle seat valve with unionised metric plain socket ends for solvent welding

d DN PN EPDM+PE code € pack n./

boxbox

type16 10 16 VVUIV016E 39,94 1 6 04

20 15 16 VVUIV020E 40,79 1 6 04

25 20 16 VVUIV025E 46,73 1 6 04

32 25 16 VVUIV032E 55,61 1 6 02

40 32 16 VVUIV040E 73,25 1 3 03

50 40 16 VVUIV050E 97,79 - 2 04

63 50 16 VVUIV063E 146,44 - 1 04

Note: for FPM+PTFE version use the EPDM+PE version + spare set in FPM+PTFE SETVV...F

VVDVAngle seat valve with metric plain spigot ends for solvent welding

d DN PN EPDM+PE code € pack n./

boxbox

type16 10 16 VVDV016E 34,89 1 12 04

20 15 16 VVDV020E 36,71 1 12 04

25 20 16 VVDV025E 40,60 1 6 04

32 25 16 VVDV032E 48,34 1 6 04

40 32 10 VVDV040E 63,70 1 3 03

50 40 10 VVDV050E 85,03 1 3 03

63 50 10 VVDV063E 123,56 - 1 05

Note: for FPM+PTFE version use the EPDM+PE version + spare set in FPM+PTFE SETVV...F

95

E2.

17

Technical specificationsConstruction Angle seat check valveSize range DN 10 ÷ 100Nominal pressure DN 10÷50: PN 16 with water at 20 °C

DN 65: PN 10 with water at 20 °CDN 80÷100: PN 6 with water at 20 °C

Temperature range 0 °C ÷ 60 °CCoupling standards Solvent welding: EN ISO 1452, EN ISO 15493, BS 4346-1,

DIN 8063, NF T54-028, ASTM D 2467, JIS K 6743. Can be coupled to pipes according to EN ISO 1452, EN ISO 15493, DIN 8062, NF T54-016, ASTM D 1785, JIS K 6741


Flanging system: ISO 7005-1, EN ISO 1452, EN ISO 15493, EN 558-1 (DN 10÷50), DIN 2501, ANSI B.16.5 cl.150, JIS B 2220


Valve material PVC-USeal material EPDM or FPM

VR

The VR is an angle seat check valve with weighted PVC piston that allows the passage of fluid in one direction only.

CHECK VALVE

• Connection system for solvent weld, threaded and flanged joints• No metal parts in contact with the fluid• Piston with counterweight able to work with high intensity fluid• Limited pressure drop. Only minimum back pressure is required for the

hermetic seal• Valve material compatibility (PVC-U) with water conveyance, drinking

water and other food substances according to current regulations • Can be maintained with the valve body installed

DN 10÷100

96

VR DN 10÷100PVC-UCHECK VALVE

VRUIVAngle seat check valve with unionised metric plain socket ends for solvent welding



box type

16 10 16 VRUIV016E 32,26 VRUIV016F 38,69 2 20 04

20 15 16 VRUIV020E 34,41 VRUIV020F 41,30 2 20 04

25 20 16 VRUIV025E 39,94 VRUIV025F 47,89 2 10 04

32 25 16 VRUIV032E 47,74 VRUIV032F 57,29 2 10 04

40 32 16 VRUIV040E 59,58 VRUIV040F 71,49 2 6 04

50 40 16 VRUIV050E 84,66 VRUIV050F 101,59 2 6 03

63 50 16 VRUIV063E 123,27 VRUIV063F 147,91 2 6 02

VRIVAngle seat check valve with metric plain socket ends for solvent welding


boxbox

type75 65 10 VRIV075E 183,98 - 2 04

90 80 6 VRIV090E 238,78 - 1 04

110 100 6 VRIV110E 419,96 - 1 04

Note: for FPM version use the EPDM version + spare set in FPM SETVR...F

VRUFVAngle seat check valve with unionised threaded socket union BS parallel series


boxbox

type3/8” 10 16 VRUFV038E 46,28 2 20 04

1/2” 15 16 VRUFV012E 48,01 2 20 04

3/4” 20 16 VRUFV034E 55,61 2 10 04

1” 25 16 VRUFV100E 68,51 2 10 04

1” 1/4 32 16 VRUFV114E 87,09 2 6 04

1” 1/2 40 16 VRUFV112E 114,70 2 6 03

2” 50 16 VRUFV200E 151,70 2 6 02


97

VR DN 10÷100PVC-U

E2.

17CHECK VALVE

VRFVAngle seat check valve with threaded socket union BS parallel series


boxbox

type2” 1/2 65 10 VRFV212E 256,39 - 2 04

3” 80 6 VRFV300E 327,06 - 1 04

4” 100 6 VRFV400E 431,12 - 1 04


VRDVAngle seat check valve with metric plain spigot ends for solvent welding


boxbox

type16 10 16 VRDV016E 28,06 2 20 04

20 15 16 VRDV020E 29,87 2 20 04

25 20 16 VRDV025E 34,71 2 20 04

32 25 16 VRDV032E 41,50 2 20 04

40 32 16 VRDV040E 51,75 2 12 04

50 40 16 VRDV050E 73,63 2 6 04

63 50 16 VRDV063E 106,83 2 6 03


98

Technical specificationsConstruction Air release valveSize range DN 15 ÷ 50Nominal pressure PN 16 with water at 20 °CTemperature range 0 °C ÷ 60 °CCoupling standards Solvent welding: EN ISO 1452, EN ISO 15493, BS

4346-1, DIN 8063, NF T54-028.Can be coupled to pipes according to EN ISO 1452, EN ISO 15493, DIN 8062, NF T54-016Thread: ISO 228-1, DIN 2999


Valve material PVC-USeal material EPDM

VA

The purpose of the VA air release is to eliminate any air entering the pipe with the liquid.

AIR RELEASE VALVE

• Connection system for solvent weld and threaded joints • No metal parts in contact with the fluid• Can be used as a vacuum breaker valve when installed with the nut at the

bottom • Valve material compatibility (PVC-U) with water, drinking water and

other food substance conveyance according to current regulations• Can be maintained with the valve body installed

DN 15÷50

99

VA DN 15÷50PVC-U

AIR RELEASE VALVE

E2.

17

VAIVAir release valve with metric unionized plain socket and spigot ends for solvent welding


boxbox

type20 15 16 VAIV020E 32,90 1 16 04

25 20 16 VAIV025E 37,23 1 20 04

32 25 16 VAIV032E 40,32 1 6 04

40 32 16 VAIV040E 43,81 1 3 04

50 40 16 VAIV050E 62,95 1 3 04

63 50 16 VAIV063E 92,08 1 3 04

BSP threaded end connector included in the packaging (VAFV)

100

Technical specificationsConstruction Foot valveSize range DN 10 ÷ 50Nominal pressure PN 16 with water at 20 °CTemperature range 0 °C ÷ 60 °CCoupling standards Solvent welding: EN ISO 1452, EN ISO 15493, BS

4346-1, DIN 8063, NF T54-028. Can be coupled to pipes according to EN ISO 1452, EN ISO 15493, DIN 8062, NF T54-016Thread: ISO 228-1, DIN 2999



VZ

The VZ foot valve allows the passage of fluid in one direction only.

FOOT VALVE

• Connection system for solvent weld and threaded joints • No metal parts in contact with the fluid• Piston with incorporated counterweight able to work with high intensity

fluid• Limited pressure loss. Only minimum back pressure is required for the

hermetic seal• Valve material compatibility (PVC-U) with water, drinking water and

other food substance conveyance according to current regulations • Can be maintained with the valve body installed

DN 10÷50

101

VZ DN 10÷50PVC-UFOOT VALVE

E2.

17

VZIVFoot valve with metric unionized plain socket and spigot ends for solvent welding


boxbox

type16 10 16 VZIV016E 32,11 1 16 04

20 15 16 VZIV020E 32,90 1 16 04

25 20 16 VZIV025E 37,18 1 16 04

32 25 16 VZIV032E 40,13 1 6 04

40 32 16 VZIV040E 45,24 1 3 04

50 40 16 VZIV050E 62,76 1 3 04

63 50 16 VZIV063E 89,47 1 3 04

BSP threaded end connector included in the packaging (VZFV)

102

Technical specificationsConstruction Wafer check valve Size range DN 40 ÷ 300Nominal pressure 5 bar with water at 20 °CTemperature range 0 °C ÷ 60 °CCoupling standards Flanging system: DIN 2501 PN 10, EN ISO 1452,

EN ISO 15493



CR

The CR wafer check valve is designed to be installed directly between stubs and flanges in accordance with ISO/DIN standards.

WAFER CHECK VALVE

• Installed with FIP QPV (d50 - d160) stubs and QRV stubs using flat gasket QHV/Y (d225 - d315), on PVC piping class PN10 or lower with type ODV flanges

• Metal support for easy and precise centring of the valve during installation

• Can be installed in either a vertical or horizontal position• Sealing system with O-ring for optimum sealing and installation without flat

gaskets

DN 40÷300

103

CR DN 40÷300PVC-U

WAFER CHECK VALVE

E2.

17

CROVWafer check valve in PVC-U/EPDM

d DN *MOP (bar) EPDM code € pack n./

boxbox

type50 40 5 CROV050E 64,16 1 - -

63 50 5 CROV063E 77,79 1 - -

75 65 5 CROV075E 85,59 1 - -

90 80 5 CROV090E 101,15 1 - -

110 100 5 CROV110E 123,77 1 - -

140 125 5 CROV140E 141,71 1 - -

160 150 5 CROV160E 173,65 1 - -

225 200 5 CROV225E 204,79 1 - -

280 250 5 CROV280E 347,51 1 - -

315 300 5 CROV315E 523,35 1 - -

* Maximum operating pressure

104

CONNECTIONSPVC-UCONNECTIONS FOR BALL AND ANGLE SEAT VALVES

CVRVEnd connector in PVC-U with BS parallel threaded spigot

R to be used with: Code € pack n./box

box type

1"1/2 VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR 20COL11M2G050 15,53 - 100 03

2" VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR 20COL11M2G063 25,88 - 60 03

CVPVEnd connector in PVC-U with hose adaptor

d x d1 to be used with: Code € pack n./box

box type

50 x 52 VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR CVPV050 8,35 - - -

60 x 64 VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR CVPV063 11,32 - - -

105

CONNECTIONSPVC-U

CONNECTIONS FOR BALL AND ANGLE SEAT VALVES

E2.

17

CVDEEnd Connector SDR11 in PE100 SDR11 long spigot for butt welding or electrofusion

d to be used with: Code € pack n./box

box type

20 VKD-VKR-TKD-VXE-VEE-SXE-SSE10-50 CVDE11020 3,53 - 350 04






75 VKD65-100 CVDE11075 27,16 - 46 02

90 VKD65-100 CVDE11090 35,28 - 28 02

110 VKD65-100 CVDE11110 41,03 - 18 02

75 VXE-VEE-SXE-SSE65-100 CVDE11075 27,16 - 46 02

90 VXE-VEE-SXE-SSE65-100 CVDE11090VXE 35,28 - 28 02

110 VXE-VEE-SXE-SSE65-100 CVDE11110VXE 41,03 - 18 02

* VEE - VXE d110 with CVDE installed are PN10 rated

Flanging Set ISO DINStandard: DIN 2501 - EN 1092, face to face according to EN558-1 (VKD only) Set composition: 1 flange, 1 locking ring, 1 nut


box type

20 VKD - VKR - TKD - RV - VV - VR- SV SETFLOV020 19,22 - 50 04






Note: factory assembled

106


Flanging Set ANSIStandard: ANSI B16.5 cl.150#FF Set composition: 1 flange, 1 locking ring, 1 nut


box type

1/2" VKD - VKR - TKD - RV - VV - VR- SV SETFLOAV012 19,22 - 50 04

3/4" VKD - VKR - TKD - RV - VV - VR- SV SETFLOAV034 22,09 - 37 04

1" VKD - VKR - TKD - RV - VV - VR- SV SETFLOAV100 26,09 - 29 04

1"1/4 VKD - VKR - TKD - RV - VV - VR- SV SETFLOAV114 32,11 - 14 04

1"1/2 VKD - VKR - TKD - RV - VV - VR- SV SETFLOAV112 33,18 - 24 03

2" VKD - VKR - TKD - RV - VV - VR- SV SETFLOAV200 42,22 - 14 03


Flanging Set ISO DIN - ANSIStandard: EN1092 / DIN2501 and ANSI B16.5 cl.150#FF face to face according to EN558-1 Set composition: 1 socket flange, 1 spigot end connector, 1 nut


box type

75 - 2"1/2 VKD SETFLOV075 65,28 - - -

90 - 3" VKD SETFLOV090 84,43 - - -

110 - 4" VKD SETFLOV110 102,75 - - -


107

CONNECTIONSPVC-U


E2.

17

ENDIVStandard: ISO metric plain socket for solvent welding*


box type

16 VKD - VEE - VXE - SXE - SSE - VKR - TKD - RV - VV - VR ENDIV016 3,82 - - -

20 VKD - VEE - VXE - SXE - SSE - VKR - TKD - RV - VV - VR ENDIV020 3,82 - 600 04






75 VKD - VEE - VXE - SXE - SSE ENDIV075 17,13 - - -

90 VKD ENDIV090 21,20 - - -

110 VKD ENDIV110 35,81 - - -

90 VEE - VXE - SXE - SSE ENDIV090VXE 21,20 - - -

110 VEE - VXE - SXE - SSE ENDIV110VXE 35,81 - - -

*One piece

ENDDVStandard: ISO metric plain spigot for solvent welding*


box type

16 VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDDV016 3,82 - - -

20 VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDDV020 3,82 - 600 04





63 VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDDV063 9,44 - 150 02

75 VKD ENDDV075 16,65 - - -

90 VKD ENDDV090 20,56 - - -

110 VKD ENDDV110 35,81 - - -

*One piece

108


ENDLVStandard: BS plain socket for solvent welding*


box type

3/8" VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDLV038 3,82 - - -



1" VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDLV100 5,21 - - -

1"1/4 VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDLV114 6,25 - - -

1"1/2 VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDLV112 7,19 - - -

2" VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDLV200 9,44 - - -

2"1/2 VEE - VXE - SXE - SSE ENDIV075 17,13 - - -

3" VKD ENDLV300 20,56 - - -

4" VKD ENDLV400 35,81 - - -

3" VEE - VXE - SXE - SSE ENDLV300VXE 20,56 - - -

4" VEE - VXE - SXE - SSE ENDLV400VXE 35,81 - - -

*One piece

ENDFVStandard: BS parallel socket threaded*


box type

3/8" VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDFV038 3,82 - - -

1/2" VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDFV012 3,82 - 600 04

3/4" VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDFV034 4,58 - 300 04

1" VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDFV100 5,21 - 250 04

1"1/4 VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDFV114 6,25 - 400 02

1"1/2 VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDFV112 7,19 - 250 02

2" VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDFV200 9,44 - 150 02

2"1/2 VKD - VEE - VXE - SXE - SSE ENDFV212 16,65 - - -

3" VKD ENDFV300 20,56 - - -

4" VKD ENDFV400 35,81 - - -

3" VEE - VXE - SXE - SSE ENDFV300VXE 20,56 - - -

4" VEE - VXE - SXE - SSE ENDFV400VXE 35,81 - - -

*One piece

109

CONNECTIONSPVC-U


E2.

17

ENDAVStandard: ASTM plain socket for solvent welding*


box type

3/8" VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDAV038 3,82 - - -



1" VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDAV100 5,21 - - -

1"1/4 VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDAV114 6,25 - - -

1"1/2 VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDAV112 7,19 - - -

2" VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDAV200 9,44 - - -

2"1/2 VKD - VEE - VXE - SXE - SSE ENDAV212 16,65 - - -

3" VKD ENDAV300 20,56 - - -

4" VKD ENDAV400 35,81 - - -

3" VEE - VXE - SXE - SSE ENDAV300VXE 20,56 - - -

4" VEE - VXE - SXE - SSE ENDAV400VXE 35,81 - - -

*One piece

ENDNVStandard: NPT tapered socked threaded*


box type

3/8" VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDNV038 3,82 - - -



1" VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDNV100 5,21 - - -

1"1/4 VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDNV114 6,25 - - -

1"1/2 VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDNV112 7,19 - - -

2" VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDNV200 9,44 - - -

2"1/2 VKD - VEE - VXE - SXE - SSE ENDNV212 16,65 - - -

3" VKD ENDNV300 20,56 - - -

4" VKD ENDNV400 35,81 - - -

3" VEE - VXE - SXE - SSE ENDNV300VXE 20,56 - - -

4" VEE - VXE - SXE - SSE ENDNV400VXE 35,81 - - -

*One piece

110


ENDJVStandard: JIS plain socket for solvent welding*


box type

3/8" VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDJV038 3,82 - - -



1" VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDJV100 5,21 - - -

1"1/4 VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDJV114 6,25 - - -

1"1/2 VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDJV112 7,19 - - -

2" VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDJV200 9,44 - - -

2"1/2 VKD - VEE - VXE - SXE - SSE ENDJV212 16,65 - - -

3" VKD ENDJV300 20,56 - - -

4" VKD ENDJV400 35,81 - - -

3" VEE - VXE - SXE - SSE ENDJV300VXE 20,56 - - -

4" VEE - VXE - SXE - SSE ENDJV400VXE 35,81 - - -

*One piece

ENDGVStandard: JIS tapered socket threaded*


box type

1/2" VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDGV012 3,82 - - -

3/4" VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDGV034 4,58 - - -

1" VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDGV100 5,21 - - -

1"1/4 VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDGV114 6,25 - - -

1"1/2 VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDGV112 7,19 - - -

2" VKD - VKR - TKD - VEE- VXE - SXE - SSE - RV - VV - VR ENDGV200 9,44 - - -

2"1/2 VKD - VEE - VXE - SXE - SSE ENDGV212 16,65 - - -

3" VKD ENDGV300 20,56 - - -

4" VKD ENDGV400 35,81 - - -

3" VEE - VXE - SXE - SSE ENDGV300VXE 20,56 - - -

4" VEE - VXE - SXE - SSE ENDGV400VXE 35,81 - - -

*One piece

111

CONNECTIONSPVC-U

SPARE END CONNECTORS FOR VALVES VA AND VZ SERIES

E2.

17

ENDIV-VZStandard: ISO metric plain socket for solvent welding*


box type

16 VA - VZ ENDIV016VZ 7,49 - - -

20 VA - VZ ENDIV020VZ 7,49 - - -

25 VA - VZ ENDIV025VZ 8,69 - - -

32 VA - VZ ENDIV032VZ 9,77 - - -

40 VA - VZ ENDIV040VZ 11,75 - - -

50 VA - VZ ENDIV050VZ 13,99 - - -

63 VA - VZ ENDIV063VZ 17,54 - - -

*One piece

ENDFV-VZStandard: BS parallel socket threaded*


box type

3/8" VA - VZ ENDFV038VZ 7,49 - - -

1/2" VA - VZ ENDFV012VZ 7,49 - - -

3/4" VA - VZ ENDFV034VZ 8,69 - - -

1" VA - VZ ENDFV100VZ 9,77 - - -

1"1/4 VA - VZ ENDFV114VZ 11,75 - - -

1"1/2 VA - VZ ENDFV112VZ 13,99 - - -

2" VA - VZ ENDFV200VZ 17,54 - - -

*One piece

112

CONNECTIONSPVC-USPARE END CONNECTORS FOR VALVES VA AND VZ SERIES

ENDAV-VZStandard: ASTM plain socket for solvent welding*


box type

1/2" VA - VZ ENDAV012VZ 7,49 - - -

3/4" VA - VZ ENDAV034VZ 8,69 - - -

1" VA - VZ ENDAV100VZ 9,77 - - -

1"1/4 VA - VZ ENDAV114VZ 11,75 - - -

1"1/2 VA - VZ ENDAV112VZ 13,99 - - -

2" VA - VZ ENDAV200VZ 17,54 - - -

*One piece

ENDNV-VZStandard: NPT tapered socked threaded*


box type

1/2" VA - VZ ENDNV012VZ 7,49 - - -

3/4" VA - VZ ENDNV034VZ 8,69 - - -

1" VA - VZ ENDNV100VZ 9,77 - - -

1"1/4 VA - VZ ENDNV114VZ 11,75 - - -

1"1/2 VA - VZ ENDNV112VZ 13,99 - - -

2" VA - VZ ENDNV200VZ 17,54 - - -

*One piece

113

CONNECTIONSPVC-U

SPARE END CONNECTORS FOR UNIONISED DIAPHRAGM VALVES

E2.

17

Q/BIVUnion end for solvent welding metric series*


box type

20 CM - FS - FC - DK - DKL - DKP - DKM - DKD QBIV020 See E3 price list - - -

25 FS - FC - DK - DKL - DKP - DKM - DKD QBIV025 See E3 price list - - -





*One piece

Q/BFVUnion end BS parallel threaded socket*


box type

3/8" CM - FS - FC - DK - DKL - DKP - DKM - DKD- S12 QBFV038 2,99 - - -

1/2" CM - FS - FC - DK - DKL - DKP - DKM - DKD QBFV012 2,99 - - -

3/4" FS - FC - DK - DKL - DKP - DKM - DKD QBFV034 3,53 - - -

1" FS - FC - DK - DKL - DKP - DKM - DKD QBFV100 6,50 - - -

1"1/4 FS - FC - DK - DKL - DKP - DKM - DKD QBFV114 6,78 - - -

1"1/2 FS - FC - DK - DKL - DKP - DKM - DKD QBFV112 7,97 - - -

2" FS - FC - DK - DKL - DKP - DKM - DKD QBFV200 10,48 - - -

*One piece

114

CONNECTIONSPVC-USPARE END CONNECTORS FOR UNIONISED DIAPHRAGM VALVES

Q/BLVUnion end for solvent welding BS series*


box type

1/2" CM - FS - FC - DK - DKL - DKP - DKM - DKD QBLV012 4,62 - - -

3/4" FS - FC - DK - DKL - DKP - DKM - DKD QBLV034 5,05 - - -

1" FS - FC - DK - DKL - DKP - DKM - DKD QBLV100 5,96 - - -

1"1/4 FS - FC - DK - DKL - DKP - DKM - DKD QBLV114 6,69 - - -

1"1/2 FS - FC - DK - DKL - DKP - DKM - DKD QBLV112 8,77 - - -

2" FS - FC - DK - DKL - DKP - DKM - DKD QBLV200 10,74 - - -

*One piece

Q/BNVUnion end NPT threaded socket*


box type

1/2" CM - FS - FC - DK - DKL - DKP - DKM - DKD QBNV012 6,12 - - -

3/4" FS - FC - DK - DKL - DKP - DKM - DKD QBNV034 6,50 - - -

1" FS - FC - DK - DKL - DKP - DKM - DKD QBNV100 6,88 - - -

1"1/4 FS - FC - DK - DKL - DKP - DKM - DKD QBNV114 7,88 - - -

1"1/2 FS - FC - DK - DKL - DKP - DKM - DKD QBNV112 10,24 - - -

2" FS - FC - DK - DKL - DKP - DKM - DKD QBNV200 12,75 - - -

*One piece

115

CONNECTIONSPVC-U

SPARE END CONNECTORS FOR UNIONISED DIAPHRAGM VALVES

E2.

17

Q/BAVUnion end for solvent welding ASTM series*


box type

1/2" CM - FS - FC - DK - DKL - DKP - DKM - DKD QBAV012 6,12 - - -

3/4" FS - FC - DK - DKL - DKP - DKM - DKD QBAV034 6,50 - - -

1" FS - FC - DK - DKL - DKP - DKM - DKD QBAV100 6,88 - - -

1"1/4 FS - FC - DK - DKL - DKP - DKM - DKD QBAV114 7,88 - - -

1"1/2 FS - FC - DK - DKL - DKP - DKM - DKD QBAV112 10,24 - - -

2" FS - FC - DK - DKL - DKP - DKM - DKD QBAV200 12,75 - - -

*One piece

Q/BJVUnion end for solvent welding JIS series*


box type

1/2" CM - FS - FC - DK - DKL - DKP - DKM - DKD QBJV012 4,62 - - -

3/4" FS - FC - DK - DKL - DKP - DKM - DKD QBJV034 5,05 - - -

1" FS - FC - DK - DKL - DKP - DKM - DKD QBJV100 5,96 - - -

1"1/4 FS - FC - DK - DKL - DKP - DKM - DKD QBJV114 9,97 - - -

1"1/2 FS - FC - DK - DKL - DKP - DKM - DKD QBJV112 10,17 - - -

2" FS - FC - DK - DKL - DKP - DKM - DKD QBJV200 11,13 - - -

*One piece

116

CONNECTIONSPVC-USPARE END CONNECTORS FOR UNIONISED DIAPHRAGM VALVES

Q/BBE-LEnd connector SDR11 in PE100 SDR11 long spigot for butt welding or electrofusion *


box type

20 CM - DK - DKL - DKP - DKM - DKD QBBEL11020 See EE price list 1 - -

25 DK - DKL - DKP - DKM - DKD QBBEL11025 See EE price list 1 - -





* one piece

117

E2.

17

pack n./box

box type

Q.ty of products per Pack 1

Q.ty of products per Carton Box 22

Carton Box type 03

Please note that pack and n/box quantities could be modified during the validity of the price list

Carton box dimensionsBox Tipe L (mm) P (mm) H (mm) Volume (m3)

00 800 600 400 0,1920

01 590 390 500 0,1151

02 590 390 300 0,0690

03 390 290 300 0,0339

04 390 290 200 0,0226

05 295 195 200 0,0115

08 680 600 280 0,1142

K01 200 200 130 0,0052

K02 200 200 200 0,0080

K03 300 200 200 0,0120

K04 300 260 200 0,0156

K05 400 300 200 0,0240

K06 400 300 250 0,0300

K07 200 150 100 0,0030

K08 300 100 100 0,0030

K09 300 260 300 0,0234

K10 400 200 200 0,0160

K11 400 400 130 0,0208

K12 400 400 250 0,0400

K13 400 260 420 0,0437

K14 400 300 250 0,0300

K15 400 300 300 0,0360

K16 400 400 250 0,0400

K17 400 400 300 0,0480

K18 600 400 300 0,0720

K19 600 400 500 0,1200

K20 800 600 350 0,1680

N01 160 160 350 0,0090

N02 170 170 300 0,0087

N03 190 190 300 0,0108

N04 210 210 300 0,0132

N05 220 220 220 0,0106

N06 240 240 240 0,0138

N07 280 280 170 0,0133

N08 300 300 180 0,0162

N09 350 350 130 0,0159

N10 410 410 150 0,0252

N11 470 470 90 0,0199

PACKAGING INFORMATION

H

P L

118

CONDITIONS OF SUPPLY• INTRODUCTORY STATEMENT: our supplies include the products specified in our Sales confirmation and are gover-

ned by the following Terms and Conditions which the Customer declares to understand and to accept, except for possible derogations stated in an explicity written agreement. In particular all foreign supplies will be governed by INCOTERMS, as defined by the International Chamber of Commerce.

• PRODUCTS: to prevent regrettable misunderstandings, it is advisable to refer to the nomenclature and codes of our catalogues and/or price lists for the identification of our products.The items featuring an asterisk (*), though currently on hand, are not included in our wide range of products for which stock rebuild is scheduled. Therefore our order acceptance depends upon the actual availability of the product.

• PACKAGING: to speed-up delivery and to facilitate warehousing at the Customer’s, we reserve the right to convert the ordered quantities into multiples of the standard packages, as shown in our price list next to each item.

• MINIMUM PURCHASE: for orders involving a net amount of less than € 516,46 we will charge € 31 as partial reco-very of the handling costs.

• PRICES: prices will be those in force at the time when the order was placed, except in case of forward delivery In the latter case, the prices in force at the time of shipment will be invoiced. Our prices include normal packing; spe-cial packing, if required by the customer will be charged at cost price.

• DELIVERY: delivery is intended ex our Warehouse or Stores and is normally prompt, subject to being unsold The anticipated delivery terms for unavailable items will be indicated, but these wjll be in no way binding or firm. If these delivery schedules cannot be kept for any reason whatsoever, the Purchaser can cancel the order only if the delay exceeds three months from the anticipated delivery date stated in our Order Confirmation. After this time lapse, we too shall be entitled to cancel any orders for items which delayed deliveries due to serious production problems.

• SHIPMENT: if the mode of shipment is not specifically indicated by the Customer, shipment will be effected as dee-med most suitable by us Even if the goods are sold free to destination, their transport will be at the Customer’s risk. Insurance coverage will only be effected if specifically requested by the Customer.

• PAYMENT: the Customer cannot, for any reason whatsoever, defer payments beyond the established dates. Furthermore, we shall be fully entitled to charge interests in arrears on any and all delayed payments. These intere-sts will be based upon the discount rate in force at that time in Italy, plus 3 unit % .

- Unless otherwise specified, payments shall be made by opening of an irrevocable credit at call (for Foreign Countries).

- Unless otherwise specified, payment shall be telegraphic transfer not !ater than 30 days after the date of invoicing (for Italy)

• OWNERSHIP CLAUSE: the products supplied by us will remain our property until fully paid for.• GUARANTEE CLAUSE: we guarantee the good quality of our products in compliance with the standards publicized

in our catalogues. However, our guarantee is limited to the repair and/or replacement of our materials, excluding any other liability, in particular for damages caused in any way whatsoever by utilization of our products. This gua-rantee terminates and will be no longer valid:

- one year after the delivery of the material in question; - if the material is used in other way than the operating conditions specified by us; - if the materials are modified by people not belonging to our Company. On this subject, it is should be noted that

the Purchaser will incur all liabilities provided by Law for any modification of our products. We shall be duly informed about any accidents in which our products are involved and such accidents shall be re-

ported to us immediately and within 24 Hours of their occurence.• CLAIMS: only complaints/claims reaching us by registered ietter within 30 days after invoicing date will be taken

into consideration. In particular, we will not accept any materials returned to us, unless their reshipment - free at our warehouses - has been duly authorized by our appropriate executive.

• DISPUTES: any disputes which cannot be amicably settled or settled by a court of arbitration, shall be handled by the Court of Genoa which will have jurisdiction.

• CUSTOMER SERVICE: our Technical and Commercial Services are available to all our Customers to provide any in-formation on the characteristics and application sectors of our products.

The above General Terms and Conditions may be changed without previous notice.All information contained in this collection are given in good faith and are correct at date of publication thereof.The drawings and photographs contained in this price list are provided for illustrative purposes.

FIP Formatura Iniezione Polimeri Loc. Pian di Parata, 16015 Casella Genova Italy

Tel. +39 010 9621.1

Fax +39 010 9621.209

[email protected]

www.fipnet.com

PRICE LIST E2aliaxis-ui.at/wp-content/uploads/2017/05/E2.17-PVC-U-Manual-Valves-2017.pdfDIN 8062, NF...

Documents

Transcript of PRICE LIST E2aliaxis-ui.at/wp-content/uploads/2017/05/E2.17-PVC-U-Manual-Valves-2017.pdfDIN 8062, NF...