Prezentacja programu PowerPoint company prez_201… · Jacek Olko Karolina Kozakiewicz Sales...
Transcript of Prezentacja programu PowerPoint company prez_201… · Jacek Olko Karolina Kozakiewicz Sales...
Company presentation
presentation agenda
1. Company presentation
2. Company machinery
3. Company plans
company presentation – mile stones
1983 – Tubex starts production of aluminum tubes
1996 – Tubex signs Joint Venture with Courtalds Packaging Eastern Europe
1998 – Courtalds Packaging Eastern Europe changes into Betts Group
2011 – Betts changes into Albea Group
2014 – Elpes is registered
2015 – Elpes arranges project financing
2016 – Elpes buys the first printing line Gallus ECS 340
2017 – Elpes prints laminate for external companies
I 2018 – 1st PSG tubing line starts
company presentation - management
Elpes was registered in 2014 by three experienced individuals:
• Marek Jaroszyński – General Director, Board Member(since 1998 in the laminate tubes business)
• Bartosz Jaroszyński – Operation Director, Board Member (since 2004 in the laminate tubes business)
• Wojciech Maciejowski – Finance Director, Board Member (since 2005 in the laminate tubes business)
Elpes ownership:
• Marek Jaroszyński 98%
• Wojciech Maciejowski 2%
company presentation – our values
experience
We would like to share with you our experience, but we don’t want to impose you our solutions-
we can only advise you how to go through the process of implementation, printing and production of tubes.
liability
We are open and transparent, we don’t pretend to be someone we are not - thanks to this we become credible.
people
Our team it’s a cornerstone of our organization. Each of us is different, but we have the same goals and we go by the same direction.
environment
We assume that we are part of the environment. We know that our activities have an impact onto the environment,
therefore we plan them taking into account environmental protection. We treat environmental protection as a priority.
sustainability
We invest in areas that need support, expansion of the industry and new technologies.
From the very beginning, we want to actively participate in the life of the local community, give new jobs, so that the development
takes place in a sustainable way.
company machinery - printing
Elpes prints on Gallus ECS 340 (flexo)• 10 colors
• Cold foil
• Silk screen
• Inspection control system (EyeC)
The plan is to purchase anotherflexo printer in 2017/2018.
company machinery - rewinding
Elpes uses 1 LANGER3 re - winder• Speed of up to 450 lm/min
• Width 350 mm
• Inspection control system (EyeC)
company machinery - tubing
In 2017/2018 Elpes starts production on
2 PSG laminate tubing lines with following specs:
Line 1 – dia 35 and 50
Line 2- dia 30 and 40, optionally dia 25
TUBE
LINE DIA ABL PBL SNAP ON S13 M15 FLIPTOP SNAP ON STANDARD FLOWER POT TOOTHPASTE FLIPTOP
1 50 + + + +
2 40 + + + + + +
1 35 + + + + + + + + +
2 30 + + + + + + +
LAMINATE TYPE HEAD CAP
company plans
In 2017 Elpes has started to build up brand new plant in Lublin (SouthEastern part of Poland, ) approx. 170 km from Warsaw capitol city. In 2019motorway from Warsaw to Lublin will be finished.
Factory is located on the total area 1 ha (purchased in 2015) at SpecialEconomic Zone in Lublin.
Airport in Lublin is located 7 km from the factory and offers flights to the UK,Ireland, Germany, Spain, Italy and other countries.
WARSZAWA
LUBLIN
company plans- visualization of new factory
company plans- visualization of new factorySeptember 2017 November 2017October 2017
December 2017January 2018
contact us!Jacek Olko Karolina Kozakiewicz
Sales Manager Sales Coordinator
[email protected] [email protected]
Mob. +48 666 037 330 Mob. +48 666 037 236
Elpes Sp. z o.o.
Registered office:
Obroncow Tobruku Str., 29/8601-494 Warsaw, Poland
Production facility:
Poznanska Str. 129/13305-850 Ozarow Mazowiecki, Poland
Phone +48 81 470 75 00
Email:[email protected]
Thank you!