PRESTIGESTEEL HOPPERS

TANDEM

TRI-AXLE

SUPER-B

05_

01

—LODE KING.IT’S ALL IN THEDETAILS.

HOPPER / PRESTIGE SERIES

01_

02_

03_

04_

03_

CHUTE OPENING SIZE

The 16" × 24" chute enables quick discharge, as well as a controlled rate of flow into an unloading auger.

02_

HOPPER CLEARANCE

High hopper clearance allows for various sizes of swing-away augers to be used during unloading for maximum flexibility.

04_

WALL CORRUGATION

A three-stage paint process consisting of a zinc coating, urethane primer and top coat keeps your trailer protected and looking great for years to come.

HIGH

LIGH

TS

02

03

04

02LODEKING.COM

01_

SLOPE SHEET ANGLES

With a minimum of 30° slopes, hoppers easily clean out without the need to sweep.

03

MOD

ELS

TRI-AXLE

102"

102"

45'

TANDEM

36', 40'

80" / 84"

74", 77"

HOPPER / PRESTIGE SERIES

DIMENSIONS

LENGTH 36' or 40' KING PIN 24" Standard, 18" Optional

EXTERIOR WIDTH 102" OVERALL HEIGHT 134" w/ 74" Wall, 137" w/ 77" Wall

INTERIOR WIDTH 98" SLOPES Minimum 30°

WALL HEIGHT 74" Standard, 77" Optional

DIMENSIONS

LENGTH 45' – 2 Hopper Standard; 45' – 3 Hopper Optional

KING PIN 2 Hopper – 15" Standard; 3 Hopper – 18" Standard

EXTERIOR WIDTH 102" OVERALL HEIGHT 140" w/ 80" Wall, 144" w/ 84" Wall

INTERIOR WIDTH 98" SLOPES Minimum 29.5°

WALL HEIGHT 2 Hopper – 80" Standard w/ 84"Option; 3 Hopper – 80" Only

VOLUME (CU. FT.) 36' LENGTH 40' LENGTH

WALL HEIGHT 74" 77" 74" 77"

WATER LEVEL 1570 1645 1730 1810

HEAPED 1680 1755 1860 1942

VOLUME (CU. FT.) 2 HOPPER 3 HOPPER

WALL HEIGHT 80" 84" 80"

WATER LEVEL 1770 1880 1990

HEAPED 1930 2040 2156

04

SUPER-B

28'6" 30" / 28'6" 102"

79" / 82" / 85"

LEAD 28'6", PULL 30'

LEAD 28'6", PULL 28'6"

VOLUME (CU. FT.)

WALL HEIGHT LEAD PULL TOTAL

- WATER LEVEL HEAPED WATER LEVEL HEAPED WATER LEVEL HEAPED

79" 1264 1373 1281 1396 2544 2769

82" 1320 1430 1340 1456 2661 2885

85" 1377 1487 1400 1515 2777 3002

79" 1264 1360 1190 1299 2453 2659

82" 1320 1436 1247 1356 2567 2792

85" 1377 1512 1303 1412 2680 2924

DIMENSIONS

LENGTH Lead 28'6", Pull 30' Standard; Lead 28'6", Pull 28'6" Option

EXTERIOR WIDTH 102"

INTERIOR WIDTH 97.75"

WALL HEIGHT 79" Standard; 82" or 85" Optional

KING PIN Lead – 30" Standard, 24" Option; Pull – 15" Standard

OVERALL HEIGHT 142" w/ 82" Wall; 139" w/ 79" Wall; 145" w/ 85" Wall

SLOPES Minimum 30°

—REFINEDPERFORMANCE.

—TRUSTED FORMILLIONS OF MILES.

07

The Hendrickson INTRAAX air-ride suspension combines the axle and suspension as a fully integrated unit. The larger diameter 5 3/4" axle provides superior rigidity.

The front and rear are equipped with ladders to provide access to each hopper. Interior steps allow the operator into the hopper and a ladder on either side of the divider wall allows movement between the hoppers.

HENDRICKSON SUSPENSION High-mounted, angled chute cranks make access easier.

CHUTE CRANKS HOPPER ACCESSEach line is easily identifiable and easy to track. All lines are safely routed through side rails and secured front and back.

AIR & ELECTRICAL LINESFour-across, full coverage 102" wide mudflaps ahead of landing gear.

EXTRA-WIDE MUDFLAPS

An auxiliary air chuck can be installed inside the air gauge box to supply air for a pneumatic vibrator. This handy outlet can also be used to bring tire pressure. up to recommended PSI.

AUXILIARY AIR SUPPLYA second chute opening shaft and crank on the opposite side from the primary chute opening.

DUAL CHUTE OPENINGThe front fender protects the area above the king pin section from road grime and snow buildup.

FRONT FENDERElectric wireless remote comes with a T210 handheld wireless remote control for opening your tarps along with a wall-mounted control box.

ELECTRIC REMOTE TARP OPENERAluminum fill plate in bumper with Lode King logo.

ALUMINUM FILL PLATE

HOPPER / PRESTIGE SERIES

STANDARD FEATURES

OPTIONAL FEATURES

08

TOW HOOKSTow hooks are welded into place as an integral part of the rear sub-frame assembly.

Hendrickson TIREMAAX PRO

TIRE INFLATION SYSTEMVents allow air to flow into the trailer during unloading.

SIDEWALL VENTS24.5" option available in aluminum or steel.

WHEELSVibrator brackets are mounted to the hopper.

VIBRATOR BRACKETS

FEAT

URES

The in-line air filter protects the air system from road debris build-up. The filter is serviceable and replaceable. Extends the duration of the ABS warranty.

IN-LINE AIR FILTERThe upper coupler design is one of the most robust in the industry.

UPPER COUPLERThe easily accessible air gauge box is positioned above the fenders to protect it from flying road debris.

LOAD GAUGE ENCLOSURE TARP BOWSThe sliding track for the chute gate is designed to be self-cleaning. The chute itself slides past the fully open trap for complete clean-out.

The indented tarp bows prevent the tarp from wearing out where the built-in ridge pole crosses the roof bow.

SELF-CLEANING CHUTE

LODEKING.COM

VIEW ALL OPTIONS AT LODEKING.COM

36' TANDEM

45' TRI-AXLE 2-HOPPER

28'6" LEAD & 30' PULL

40' TANDEM

45' TRI-AXLE 3-HOPPER

28'6" LEAD & 28'6" PULL

LODEKING.COM

TAND

EMTR

I-AXL

ESU

PER-

B

Lode King Industries is a division of Triple E Canada Ltd. Product improvement is an ongoing process a Lode King Industries. Thus we reserve the right to change any specifications or components on any specifications or components on any or all products without prior notice; errors or omissions excepted. Lode King Industries is under no obligation to undertake modifications to units manufactured prior to changes in specifications. Printed in Canada. 06/17.

61" 61" 18'1 1/2" 5.52m 49"

82" SHOWN79" OPTION85" OPTION

30° 33° 30° 30°

11R24.5

28'6" 8.69m4'5" 1.35m

28'6" 8.69m

15" KP

30" KP SHOWN24" KP OPTION

29'3 1/2" 9.08m WHEELBASE

32 1/2"

117 5/16"

28"

22'10 5/8" 6.98m WHEELBASE

49"

141"W/ 82" WALL

138"W/ 79" WALL

144"W/ 85" WALL

23"

116 3/4" 97 1/8"

112 3/8"

61'5" 18.72m

188" 180 1/2"

ALL CHUTES 16" WIDE X 24" LONG

114" 112 1/2"

30° 33° 30° 30°

82" SHOWN79" OPTION85" OPTION

61" 61" 18'2 1/8" 5.54m

11R24.5 116 3/4" 115 3/16"

187 1/8"

30" KP SHOWN24" KP OPTION

28'6" 8.69m2'11 5/8" 0.90m

30'0" 9.14m

15" KP

49"

29'3 1/2" 9.08m WHEELBASE

50"

24'4 5/8" 7.43m WHEELBASE

49" 28"

141 1/2"W/ 82" WALL

138 1/2"W/ 79" WALL

144 1/2"W/ 85" WALL

23"

61'-5 1/2" 18735mm

189 9/16"

ALL CHUTES16" WIDE X 24" LONG

OPTIONALL CHUTES24" WIDE X 32" LONG

77" SHOWN74" OPTION 30°

30°

11R24.5

36'0" 10.97m SHOWN40' [12.19m] OPTION

24" KP SHOWN18" KP OPTION

29'7 1/2" 9.03m WHEELBASE /W 36'33'7 1/2" [10.24m] WHEELBASE /W 40'

49" 28"

111"

137"W/ 77" WALL

134"W/ 74" WALL

49"

220 3/8" W/ 36' TRAILER244 3/8" W/ 40' TRAILER

33° 33°

151" W/ 432" SHOWN199" W/ 480" OPTION

23"

ALL CHUTES 16" WIDE X 24" LONG

74" SHOWN71" OPTION77" OPTION84" OPTION 33° 33°

11R24.5

40'0" 12.19m

232 7/8"

33° 33°

24" KP SHOWN18" KP OPTION

32'8 3/16" 9.96m WHEELBASE

111 1/4"

72" 28"

135"W/ 74" WALL

132"W/ 71" WALL

138"W/ 77" WALL

145"W/ 84" WALL 49"

175 1/8"

23"

ALL CHUTES 16" WIDE X 24" LONG

60" 60"

80" SHOWN84" OPTION

11R24.5

33°

45'0" 13.72m

141 3/16"

27"

15" KP

36'6 3/16" 11.13m WHEELBASE

263 7/16"

33° 33°

140"W/ 80" WALL

144"W/ 84" WALL

49" 23"

163"

29.5°

ALL CHUTES 16" WIDE X 24" LONG

80"

60" 60" 11R24.5

30°

45'0" 13.72m

18" KP

204 1/8" 294"

112 3/8"

140"

49" 23"

36'3" 11.05m WHEELBASE

27" 115"

29.5°

ALL CHUTES 16" WIDE X 24" LONG

PRESTIGE

SPEC

IFIC

ATIO

NS

09 HOPPER / PRESTIGE SERIES

—WITH YOUFOR THELONG HAUL.

FOR MORE THAN 35 YEARS, LODE KING INDUSTRIES HAS BEEN MANUFACTURING THE FINEST TRAILERS ON THE ROAD. FROM GRAIN TRAILERS AND FLATBEDS TO SPECIALIZED-APPLICATION TRAILERS, LODE KING’S ATTENTION TO QUALITY AND CUSTOMER CARE SIMPLY CAN’T BE MATCHED.

COUPLER Holland Fifth Wheel Standard; Other Options Available

HOPPER CHUTES Standard Opening Size – 24" Long × 16" Wide; Roadside Opener Standard; 23 1/4" Clearance (w/ 11Rx24.5 Rubber); Other Options Available

HOPPERS 14 Gauge Steel; Overlapped Corners; Two Rows of Stiffeners on All Sides; Full Height Steel Divider Wall between Hoppers; Other Options Available

LANDING GEAR Holland Mark V, Two Speed

LIGHTING Seven Wire Connector at Front; Truck-Lite LED Lighting Standard; Lifetime Warranty Lamps; Truck-Lite Wiring Harness; Other Options Available

MUD FLAPS 1/2" Rubber Anti-Sail Rear Flaps Standard; Other Options Available

PAINT All Steel Components, Coupler Frame and Suspension Frame. Three-Stage Paint Process Consisting of a Coating of Zinc, Urethane Primer and Top Coat.

SIDE WALLS Corrugated 16 Gauge Steel Side Walls w/ 14 Gauge in High Stress Areas; Other Options Available

SLOPES Aluminum Slope Sheets – .063 Thickness, Available in Black, White or Unpainted; No Less than 29.5°

TARPS/TARP SUPPORTS Michel's Roll Tarp, Reinforced over Roof Bows; Fiberglass Ridge Pole; Aluminum Roof Bows; Aluminum End Caps; Remote Openers; Other Options Available

AXLES Hendrickson INTRAAX .31" Wall, 5 3/4" Round, 77 1/2" Track, HN Spindle; Other Options Available

BRAKE SYSTEM Air Drum Brake Standard; HXS-H23 Extended Service Linings Standard; Haldex 30/30 Gold Seal; Haldex S-ABA Slack 5 1/2"; 28 Spline Standard; Meritor Wabco ABS Equipped; Other Options Available

FENDERS Lode King Checkered Aluminum Flat Fenders; Other Options Available

HUBS 10 Stud HP Cast Hub/Cast Drum Standard; Other Options Available

SUSPENSION Hendrickson INTRAAX AANT23K LDA Air Ride Standard; Air Gauge Mounted in an Aluminum Box c/w Window and Light; Other Options Available

TIRES Michelin/BF Goodrich Standard; Other Options Available

WHEEL SEALS National

WHEELS 22.5" Standard; Other Options Available

BODY STRUCTURE

RUNNING GEAR

We’ve been proud to call Winkler, Manitoba home since 1980. Lode King has grown from humble beginnings to become Western Canada’s leading commercial trailer manufacturer. We’re building on that foundation, continually growing and innovating as our products take on new challenges year after year. Commitment to these founding principles and our dedication to future growth underpin our company’s culture and products.

SOLID FOUNDATIONLode King understands our country’s diverse and sometimes harsh landscape. From the majestic Rockies to the big-sky prairies, we’re honoured to be Western Canada’s largest commercial trailer manufacturer. Our trailers are built to withstand Canada’s ever-changing, severe climates, while our dealer network conveniently spans coast to coast, serving our customers with a wide variety of product options.

MADE IN CANADA

Pride, dedication and loyalty are just part of what drives the team at Lode King Industries. We are committed to maintaining one of the cleanest and safest workspaces around, and place a high level of importance on training and development. This means that our employees are able to develop their skills, which provides both security and opportunities for career development within our growing company.

PROUD, DEDICATEDAND LOYAL TEAM

Built tough, our no-compromise quality standards are unmatched in the transport trailer industry. Manufacturing within ISO 9001 international standards, we source and use the best materials available, from initial production steps to final finishing. Our goal is always to build a trailer that’s engineered to last, whatever our customers put it through. Every trailer is inspected and certified for quality assurance.

CRAFTSMANSHIP

The latest in automated laser cutting, bending and welding technologies provide the precision and consistency needed to produce top quality components. It’s innovative tools like these that help push our products to new heights and make our vision to create the best trailer possible a reality. In our world-class paint facility we also push the boundaries of the transport industry’s finishing standards.

CUTTING EDGETECHNOLOGY

Lode King trailers are built for drivers who demand more in terms of style, technology, durability and features. Our customers head out on the open road with a sense of pride and have become our ambassadors at large. We never forget that every trailer has our name on it, so we maintain and value the relationships we’ve formed with fleet operators over the past 35-plus years.

PROUD CUSTOMERS

Long term in our industry means more to Lode King than we can possibly convey. Our unwavering quest to produce the highest quality trailers has turned into decades of success for our customers. Knowing our durable trailers will withstand heavy use for years to come helps our customers purchase in total confidence. Our premium quality product means minimal downtime, which leads to more time out on the road, getting the job done.

LONG TERMRELIABILITY

We know exactly how important communication is when you’re miles away from home. Technology and customer relations play a large role in how we provide solid service before, during, and after your purchase. As an integrated customer service team working together with our dealer network, we work hand-in-hand with our customers, pro-actively meeting their needs and maintaining the pride they feel in pulling a Lode King trailer.

CUSTOMER SERVICE:A LODE KING PRIORITY

—WITH YOUFOR THELONG HAUL.

10LODEKING.COM

BOX 1146, 135 CANADA ST WINKLER, MB, CANADA, R6W 4B2

PHONE 204-325-4345 FAX 204-325-5369

LODEKING.COM

Lode King Industries is a division of Triple E Canada Ltd. Product improvement is an ongoing process at Lode King Industries. Thus we reserve the right to change any specifications or components on any specifications or components on any or all products without prior notice; errors or omissions excepted. Lode-King Industries is under no obligation to undertake modifications to units manufactured prior to changes in specifications. Printed in Canada. 06/17.