Puma Accessories - Check Valve, Pressure Switch, Pressure ...
PRESSURE WAVE VALVE - Amazon Web Services
2
PRODUCT DATA SHEET PRESSURE WAVE VALVE The Pressure Wave Valve (PWV) provides an interventionless method of opening a circulation path through a barrier plug. The system operates on command and is activated by pressure wave cycles. Due to this mechanical activation the valve is non-time dependent and can be installed for several years prior to operation. NON-TIME DEPENDENT Interventionless method of opening a circulation path Activation pressure cycles can be minutes or years apart Reduces intervention runs - saves rig time and reduces risk exposure No electrics, batteries or other time-limited components No well specific set-ups required TECHNICAL FEATURES Provides a large through bore when opened Functions purely on a mechanical hydraulic principle Activated by sending a ‘wave’ of applied pressure (low-high-low pressure) Built in debris catcher 6 or 12 pressure cycle activation options available Flexible deployment options; Oilenco Hybrid Plug, lock mandrels or bridge plugs 5,000 psi working pressure Can be pre-installed onshore for completion operations Can be retrieved with the tubing during workovers No dedicated personnel required on location to operate 2 sizes available: 1-1/2” annulus bore 2-7/8” production bore 2-7/8” version 1-1/2” version
Transcript of PRESSURE WAVE VALVE - Amazon Web Services
PRODUCT DATA SHEET
PRESSURE WAVE VALVE
The Pressure Wave Valve (PWV) provides an interventionless method of opening a circulation path through a barrier plug. The system operates on command and is activated by pressure wave cycles. Due to this mechanical activation the valve is non-time dependent and can be installed for several years prior to operation.
NON-TIME DEPENDENTInterventionless method of opening a circulation path
Activation pressure cycles can be minutes or years apart
Reduces intervention runs - saves rig time and reduces risk exposure
No electrics, batteries or other time-limited components
No well specific set-ups required
TECHNICAL FEATURESProvides a large through bore when opened
Functions purely on a mechanical hydraulic principle
Activated by sending a ‘wave’ of applied pressure (low-high-low pressure)
Built in debris catcher
6 or 12 pressure cycle activation options available
Flexible deployment options; Oilenco Hybrid Plug, lock mandrels or bridge plugs
5,000 psi working pressure
Can be pre-installed onshore for completion operations
Can be retrieved with the tubing during workovers
No dedicated personnel required on location to operate
2 sizes available:
1-1/2” annulus bore
2-7/8” production bore
2-7/8” version
1-1/2” version
5000PSI
0
4000PSI
3000PSI
2000PSI
1000PSI
00
APPLICATIONSFitted to any flow control device
New completions
Workovers
EXAMPLE OF PRESSURE WAVES TO ACTIVATE VALVE (6 CYCLE)
Plug and abandonment (P&A) workscopes
Flow through applications
Equalising without wireline
TECHNICAL DATA
NOMINAL SIZE ACTUAL OD MIN ID FLOW AREA PWV LENGTH
JUNK CATCHER CONNECTIONMAX WORKING PRESSURE
PRESSURE CYCLESTO ACTIVATE
PRESSURE CYCLE RANGE
5000psi
5000psi
1000-3000psi*
1000-3000psi*
1-1/2”
2-7/8”
1.500in
2.875in
0.512in
1.382in
0.206in
1.500in
3.8ft
3.2ft
3.4ft
4.0ft
1 9/32-10TPISA Box
2 9/16-10TPISA Box
6 cycle
12 cycle38.1mm 13.0mm
73.0mm 35.1mm
1-1/2”
2-7/8”
NOMINAL SIZE
Integrated
2.2ft
INITIAL PRESSURE TEST OF PLUG1
2 3 45
6
*Pressure cycle range can be altered to suit well limitations
6 cycle
12 cycle
