Pressure Vessel Design-Excel-sheet-basic-designing-non-critical-P.xls
-
Upload
abhimohit2005 -
Category
Documents
-
view
2.528 -
download
43
description
Transcript of Pressure Vessel Design-Excel-sheet-basic-designing-non-critical-P.xls
Basic Data Input Properties of Top / Left End 1 Properties of Bottom / Right End 2Inner Diameter of Shell 1,100 mm Hemispherical (H) Hemispherical (H)Inner Radius 550 mm Volume 0.000 m³ Volume 0.000 m³Length of Shell 3,120 mm Surface area 0.000 m² Surface area 0.000 m²Thickness of Shell 12.0 mm Weight of end 0.00 kgs Weight of end 0.00 kgsThickness of Top / Left End 1 12.0 mmThickness of Bottom / Right End 2 12.0 mm F & D / Torispherical (T) F & D / Torispherical (T)Mean Diameter of Shell 1,112 mm Crown radius 0 mm Crown radius 0 mmType of Top / Left End 1 E Knuckle radius (default) 0 mm Knuckle radius (default) 0 mmType of Bottom / Right End 2 E Knuckle radius (actual) 170 mm Knuckle radius (actual) 170 mmSpecific Gravity of material 7.85 SF (default) 0 mm SF (default) 0 mmPressure 85 psi SF (actual) 50 mm SF (actual) 50 mmPressure 5.98 kg/cm² Ht. of end (incl. SF) 0 mm Ht. of end (incl. SF) 0 mmStress value 20,000 psi Volume 0.000 m³ Volume 0.000 m³Joint Efficiency 0.85 Surface area 0.000 m² Surface area 0.000 m²Corrosion allowance 0.0 mm Blank size 0 dia Blank size 0 dia
Weight of end 0.00 kgs Weight of end 0.00 kgsDetermine Thickness of Vessel
Required thickness of Shell 2.76 mm 2:1 Ellipsoidal (E) 2:1 Ellipsoidal (E)Required thickness of End (E) 2.75 mm Crown radius 990 mm Crown radius 990 mmRequired thickness of End (T) 6% 0.00 mm Knuckle radius (default) 187 mm Knuckle radius (default) 187 mmRequired thickness of End (T) 10% 0.00 mm Ht. of end 275 mm Ht. of end 275 mmRequired thickness of End (H) 0.00 mm SF 50 mm SF 50 mmRequired thk of End (C) Longit'l 0.00 mm Ht. of end (incl. SF) 325 mm Ht. of end (incl. SF) 325 mmRequired thk of End (C) Circumf'l 0.00 mm Volume of SF 0.048 m³ Volume of SF 0.048 m³Co-efficient M reqd. for End (T) 10% 0.00 Volume Total 0.222 m³ Volume Total 0.222 m³
Surface area 1.459 m² Surface area 1.459 m²Maximum Pressure allowable in Vessel Blank size 1363 dia Blank size 1363 dia
Pressure 366 psi Weight of end 137.45 kgs Weight of end 137.45 kgsHydrotest Pressure 476 psiPressure 25.74 kg/cm² Truncated Cone (TC) Truncated Cone (TC)Hydrotest Pressure 33.46 kg/cm² Small diameter 200 mm Small diameter 150 mmPressure 2.52 MPa Ht. of cone 800 mm Ht. of cone 800 mmHydrotest Pressure 3.28 MPa Volume 0.000 m³ Volume 0.000 m³
NOTE: kg/cm², bar, atmosphere are almost same Big diameter (outer) 0 mm Big diameter (outer) 0 mmSmall diameter (outer) 0 mm Small diameter (outer) 0 mm
Volume when Vessel Size is given Surface area 0.000 m² Surface area 0.000 m²Volume of Shell 2.965 m³ Weight of end 0.00 kgs Weight of end 0.00 kgsVolume of Top / Left End 1 0.222 m³Volume of Bottom / Right End 2 0.222 m³ Full Cone (C) Full Cone (C)Volume of vessel 3.409 m³ Ht. of cone 800 mm Ht. of cone 800 mm
Volume 0.000 m³ Volume 0.000 m³Weight of Vessel Big diameter (outer) 0 mm Big diameter (outer) 0 mm
Area of Shell 11.02 m² Apex angle (degrees) 0.000 Apex angle (degrees) 0.000Area of Top / Left Cone End 1 1.46 m² Apex angle (radians) 0.000 Apex angle (radians) 0.000Area of Bottom / Right Cone End 2 1.46 m² Surface area 0.000 m² Surface area 0.000 m²Total Surface Area of Vessel 13.94 m² Weight of end 0.00 kgs Weight of end 0.00 kgsWeight of Shell 1,026.87 kgsWeight of Top / Left end 1 137.45 kgs Flat (F) Flat (F)Weight of Bottom / Right end 2 137.45 kgs Volume 0.000 m³ Volume 0.000 m³Total Weight 1,301.77 kgs Surface area 0.000 m² Surface area 0.000 m²
Weight of end 0.00 kgs Weight of end 0.00 kgs