Pressure reducing valve, Replaces: 02.03 direct operated reducing valves.pdf · 2/8 Bosch Rexroth...

1/8

Information on available spare parts: www.boschrexroth.com/spc

Pressure reducing valve, direct operated

Type DR 6 DP

Size 6Component series 5XMaximum operating pressure 315 bar [4568 psi]Maximum flow 60 l/min [15.9 US gpm]

RE 26564/05.11Replaces: 02.03

Table of contents Features

– For subplate mounting– Porting pattern according to DIN 24340 form A– Porting pattern according to ISO 4401-03-02-0-05 and

NFPA T3.5.1 R2-2002 D03 (with locating hole)– 4 adjustment types for pressure adjustment, optionally: •Rotaryknob •Setscrewwithhexagonandprotectivecap •Lockablerotaryknobwithscale •Rotaryknobwithscale

– 5 pressure ratings– Checkvalve,optional

– More informatio:

• Subplates Data sheet 45052

Contents PageFeatures 1Ordering code 2Symbols 2Function, section 3Technical data 4Characteristic curves 5Unit dimensions 6, 7

H7743

InhaltTable of contents 1Features 1Ordering code 2Symbols 2Function, section 3Technical Data (For applications outside these parameters, please consult us!) 4Characteristic curves(measuredwithHLP46,ϑOil = 40 ± 5 °C [104 ± 9 °F]) 5Unit dimensions (dimensions in mm [inch]) 6Unit dimensions 7Notes 8

2/8 Bosch Rexroth AG Hydraulics DR 6 DP RE 26564/05.11

Ordering code

Pressure reducing valve, direct operated, size 6

Adjustment typeRotaryknob = 1 Setscrew with hexagon and protective cap = 2Lockablerotaryknobwithscale = 3 1)

Rotaryknobwithscale = 7Component series 50 to 59 = 5X (50 to 59: Unchanged installation and connection dimensions)Maximum secondary pressure 25 bar [362 psi] = 25Maximum secondary pressure 75 bar [1088 psi] = 75Maximum secondary pressure 150 bar [2175 psi] = 150Maximum secondary pressure 210 bar [3046 psi] = 210Maximum secondary pressure 315 bar [4568 psi] = 315 2)

Further details in the plain textNo code = Without locating hole/603) = With locating hole/62 = With locating hole and locating

pin ISO 8752-3x8-StSeal material

No code = NBR seals V = FKM seals

(other seals upon request) Attention! Observe compatibility of seals with hydrau-

lic fluid used!No code = WithcheckvalveM = Withoutcheckvalve

Y = Pilotoilsupplyinternal,leakageoildischargeexternal

DR 6 DP 5X Y *

1) H-keywithMaterialno.R900008158 is included in the delivery.

2) Onlywithadjustmenttype"2"andwithoutcheckvalve3)LocatingpinISO8752-3x8-St,

Material no. R900005694 (separate order)

Symbols

Version "M"withoutcheckvalve

"No code" versionwithcheckvalve

M

A

P T(Y)

M

A

P T(Y)

Standard types and standard units are contained in the EPS (standard price list).

4 3 7 52 8 1

6T(Y)AP

M

Hydraulics Bosch Rexroth AGRE 26564/05.11 DR 6 DP 3/8

Function, sectionIf the pressure in channel A continues to increase due to ex-ternal forces at the actuator, it moves the control spool (2) fur-ther against the compression spring (3).Thus, channel A is, via the control edge (8) at the control spool (2), connected with channel T(Y). Hydraulic fluid flows tothetankuntilthepressurecanonlyincreaseslightly.Theleakageoildrainfromthespringchamber(7)isalwaysrealized externally, via channel T(Y).ForthefreeflowbackfromchannelAtochannelP,youcanoptionallyinstallacheckvalve(5).A pressure gauge connection (1) allows for the control of the secondary pressure.

The valve type DR 6 DP is a direct operated pressure reduc-ing valve in 3-way design, i.e. with pressure limitation of the secondary circuit.It is used to reduce a system pressure. The secondary pres-sure is set via the adjustment type (4).In the initial position the valve is open. Hydraulic fluid can flow from channel P to channel A without obstructions. Via the pi-lot line (6), the pressure in channel A is applied to the spool face vis-à-vis the compression spring (3). If the pressure in channel A rises above the value set at the compression spring (3), the control spool (2) moves into the control posi-tion and holds the set pressure in channel A constant.Signal and pilot oil are provided internally, via the control line (6) by channel A.

Type DR 6 DP1-5X/.Y…


Technical Data (For applications outside these parameters, please consult us!)

generalWeight kg [lbs] 1.2 [2.64]

Installation position AnyAmbient temperature range °C [°F] –30 to +80 [–22 to +176] (NBR seals)

–20 to +80 [–4 to +176] (FKM seals)

hydraulicMaximum operating pressure – Port P bar [psi] 315 [4568]

Maximum secondary pressure – Port A bar [psi] 25; 75; 150; 210; 315 [362; 1088; 2175; 3046; 4568]

Maximumbackpressure – Port T (Y) bar [psi] 160 [2320]

Maximum flow l/min [US gpm] 60 [15.9]

Hydraulic fluid See table belowHydraulic fluid temperature range °C [°F] –30 to +80 [–22 to +176] (NBR seals)

–20 to +80 [–4 to +176] (FKM seals)Viscosity range mm2/s [SUS] 10 to 800 [60 to 3710]

Maximum permitted degree of contamination of the hydraulic fluid - cleanliness class according to ISO 4406 (c)

Class 20/18/15 1)

1) The cleanliness classes specified for the components must be adhered to in hydraulic systems. Effective filtration pre-vents faults and at the same time increases the service life of the components.

For the selection of the filters see www.boschrexroth.com/filter.

Hydraulic fluid Classification Suitable sealing materials StandardsMineral oils and related hydrocarbons HL,HLP,HLPD NBR, FKM DIN 51524

Environmentally compatible

– Insoluble in waterHETG NBR, FKM

ISO 15380HEES FKM

– Soluble in water HEPG FKM ISO 15380

Flame-resistant– Water-free HFDU, HFDR FKM ISO 12922

– Water-containing HFC (Fuchs Hydrotherm 46M, Petrofer Ultra Safe 620) NBR ISO 12922

Important information on hydraulic fluids!– For more information and data on the use of other hydrau-

lic fluids refer to data sheet 90220 or contact us!– There may be limitations regarding the technical valve

data (temperature, pressure range, service life, mainte-nance intervals, etc.)!

– Flame-resistant – water-containing: •Maximumoperatingpressure210bar•Maximumhydraulicfluidtemperature60°C• ExpectedservicelifeascomparedtoHLPhydraulicoil

30 % to 100 %

040

50

50 20 0 20 40 60

100

150

200

250

300315

350

[13.2] [0] [15.9]

[0]

[5] [10][5][10]

[5076]

[1000]

[2000]

[3000]

[4000]

[500]

[1500]

[2500]

[3500]

[4500]

5

10 20 30 40 50 60

10

15

20

25

32

1

4

0

[2][0] [4] [6] [8] [15.9]

0

[362.6]

[0]

[50]

[100]

[150]

[200]

[10] [12] [14]

[300]

[250]


Note!With lower pressures set, the curve development is main-tained according to the pressure rating.

The characteristic curves apply to the pressure at the valve output p = 0 bar across the entire flow range.

1 P to A (minimum pressure differential)2 A to T(Y) (minimum pressure differential)3 ∆ponlyviacheckvalve4 ∆pviacheckvalveandcompletelyopenedcontrol

cross-section

Characteristic curves(measuredwithHLP46,ϑOil = 40 ± 5 °C [104 ± 9 °F])

Flow in l/min [US gpm] →

Seco

ndar

y pr

essu

re in

bar

[psi

] →

Flow in l/min [US] gpm] →Pr

essu

re d

iffer

entia

l in b

ar [p

si] →

pA-qV characteristic curves ∆p-qV characteristic curves

A to T P to A

323

45

21

1

35 20 40 41 52,5

39,5

32

189

27,5

199

39

12,5

4 x 12,2; 1,4 4 x 5,4

45

209

40

50

23318

T(Y)

PA

B

6,7

84,5

1 124; 5

6

3 13

9 8

2

10

11

7

15 14

G

[Ø1.

57]

[0.71]

[8.23]

[9.17]

[1.9

7]

[7.44]

[Ø1.26]

[1.56]

[Ø1.

38]

[0.7

9]

[1.5

7]

[1.6

1] [2.0

7]

[1.7

7]

[0.2

6]

[7.83]

[3.33]

[1.08]

[0.49]

[Ø1.

54]

[Ø0.48; 0.055]

F1 F2

F3F4

[Ø0.0.213]

0,01/100[0.0004/4.0]

Rzmax 4


Unit dimensions (dimensions in mm [inch])

Required surface quality of the valve mounting face

Explanations of items, valve mounting screws and sub-plates see page 7.


Unit dimensions

1 Name plate2 Adjustment type "1"3 Adjustment type "2"4 Adjustment type "3"5 Adjustment type "7"6 Spacerequiredtoremovethekey7 Valve mounting bores8 LocknutSW249 Hexagon SW10

10 Identical seal rings for ports A, B, P, T(Y)11 Pressure gauge connection G1/4, 12 deep.

Internal hexagon SW612 Withoutcheckvalve13 Withcheckvalve14 Port B without function15 Porting pattern according to DIN 24340 form A

(without locating hole), or ISO 4401-03-02-0-05 and NFPA T3.5.1 R2-2002 D03 (with locating hole for lo-cating pin ISO 8752-3x8-St, Material no. R900005694, separate order)

Subplates according to data sheet 45052 (separate order)(without locating hole) G 341/01 (G1/4) G 342/01 (G3/8) G 502/01 (G1/2)(with locating hole) G 341/60 (G1/4) G 342/60 (G3/8) G 502/60 (G1/2)

Valve mounting screws (separate order)4 hexagon socket head cap screws metric ISO 4762 - M5 x 50 - 10.9-flZn-240h-L with friction coefficient µtotal = 0.09 to 0.14, Tightening torque MA = 7 Nm ±10 %, Material no. R913000064

4 hexagon socket head cap screws UNC 10-24 UNC x 2" (on request)

Bosch Rexroth AG HydraulicsZum Eisengießer 197816LohramMain,Germany Phone +49 (0) 93 52 / 18-0 Fax +49 (0) 93 52 / 18-23 [email protected] www.boschrexroth.de

© This document, as well as the data, specifications and other informa-tion set forth in it, are the exclusive property of Bosch Rexroth AG. It may not be reproduced or given to third parties without its consent.The data specified above only serve to describe the product. No state-ments concerning a certain condition or suitability for a certain applica-tion can be derived from our information. The information given does not release the user from the obligation of own judgment and verification. It must be remembered that our products are subject to a natural process of wear and aging.


Notes

1/12

Information on available spare parts: www.boschrexroth.com/spc

Pressure reducing valve, pilot operated

Type DR

RE 26892/05.11Replaces: 02.03

Table of contents Features

– For subplate mounting– Porting pattern according to ISO 5781– For threaded connection– As cartridge valve– 4 adjustment types, optional: •Rotaryknob •Bushingwithhexagonandprotectivecap •Lockablerotaryknobwithscale •Rotaryknobwithscale

– 5 pressure ratings– Checkvalve,optional(onlysubplatemounting)

– More information:

• Subplates Data sheet 45062

Contents PageFeatures 1Ordering code 2Symbols 2Function, section 3Technical data 4Characteristic curves 5 to 7Unit dimensions 8 to 11Installation bore 12

K4660/9

Size 10 to 32Component series 5XMaximum operating pressure 350 barMaximum flow 400 l/min

InhaltTable of contents 1Features 1Ordering code 2Symbols 2Function, section 3Technical Data(Forapplicationsoutsidetheseparameters,pleaseconsultus!) 4Characteristic curves(measuredwithHLP46,ϑoil = 40 °C ± 5 °C) 5Characteristic curves(measuredwithHLP46,ϑoil = 40 °C ± 5 °C) 6Characteristic curves(measuredwithHLP46,ϑoil = 40 °C ± 5 °C) 7Unit dimensions: TypeDRC…;cartridgevalve(dimensionsinmm) 8Unit dimensions: TypeDR…;threadedconnection(dimensionsinmm) 9Unit dimensions: TypeDR…;subplatemounting(dimensionsinmm) 10Unit dimensions 11Installation bore (dimensionsinmm) 12

2/12 Bosch Rexroth AG Hydraulics DR RE 26892/05.11

Ordering code

Complete valve = no code (Subplatemountingorthreadedconnection)Pilot valve = C without mainspoolinsert(cartridgevalve) (donot entersize)Pilot valve = C with mainspoolinsert(cartridgevalve) (entervalvesize30)

Size

Ordering codeSubplate

mounting "–"Threaded

connection "G"10 = 10 = 10(G1/2)16 – = 15(G3/4)25 = 20 = 20(G1)25 – = 25(G11/4)32 = 30 = 30(G11/2)

As cartridge valve = no code (version"C",withoutmainspoolinsert)As cartridge valve = – (version"C",withmainspoolinsert)For subplate mounting = –For threaded connection = GAdjustment type for pressure adjustmentRotaryknob = 4Bushingwithhexagonandprotectivecap = 5 (alwayswithmaximumpressureadjustment)Lockablerotaryknobwithscale = 61)

Rotaryknobwithscale = 7

1) H-keywithMaterialno.R900008158 is included in the delivery.

Further details in the plain textSeal material

No code = NBRsealsV = FKM seals

(othersealsuponrequest)Attention!

Observe compatibility of seals with hydraulic fluid used!

No code = With checkvalve (onlyforsubplatemounting)

M = Without checkvalve Pilot oil supplyY = Pilot oil supply internal,

pilot oil return external50 = Set pressure up to 50 bar100 = Set pressure up to 100 bar200 = Set pressure up to 200 bar315 = Set pressure up to 315 bar350 = Set pressure up to 350 bar

(onlyversion"M")5X = Component series 50 to 59 (50to59:unchangedinstallationandconnectiondimensions)

DR 5X Y *

Symbols

Type DR…YM Type DR…Y

B

A Y

B

A Y

AB

16

a a

A B Y

5

1

438

7

17

2

9 10 6 11 14

12

13

15

Hydraulics Bosch Rexroth AGRE 26892/05.11 DR 3/12

Function, section

Pressure valves type DR are pilot operated pressure reducing valves that are controlled from the secondary circuit.The pressure reducing valves basically comprise of a main valve(1)withmainspoolinsert(3)andpilotcontrolvalve(2)with pressure adjustment element.Basic principle:Inrestposition,thevalvesareopen.HydraulicfluidflowsfromchannelBviathemainspoolinsert(3)tochannelAwithout obstructions. The pressure available in channel A acts on the lower main spool side. At the same time, the pres-sureisappliedtothespring-loadedsideofthemainspool(3)viathenozzle(4)andattheball(6)inthepilotcontrolvalve(2)viathechannel(5).Italsoactsontheball(6)vianozzle(7),controlline(8),checkvalve(9)andnozzle(10).Dependingonthespring(11)setting,apressurebuildsupin

frontoftheball(6),inthechannel(5)andinthespringcham-ber(12),whichkeepsthecontrolspool(13)inopenedposi-tion.ThehydraulicfluidinchannelBcanflowviathemainspoolinsert(3)tochannelAwithoutobstructionsuntilapres-sure builds up in channel A that exceeds the value set at thespring(11)andopenstheball(6).Thecontrolspool(13)moves in closing direction.The desired reduced pressure is achieved if there is a state ofequilibriumbetweenthepressureinchannelAandthepressuresetatthespring(11).Thepilotoilreturnfromthespringchamber(14)isalwaysef-fectedexternallyviathecontrolline(15)intothetank.ForthefreeflowbackfromchannelAtochannelB,youcanoptionallyinstallacheckvalve(16).Apressuregaugeconnection(17)allowsforthecontrolofthereduced pressure in channel A.

Type DR..-4-5X/...Y...

withoutcheckvalve

withcheckvalve

Section a - a


Technical Data(Forapplicationsoutsidetheseparameters,pleaseconsultus!)

generalSize 10 16 25

(typeDR..20)25

(typeDR..25)32

Weight Subplate mounting – Type DR . .– kg 3.4 – 5.3 – 8.0Cartridge valve – Type DRC kg 1.2

– Type DRC 30 kg 1.5Threaded connection –TypeDR..G kg 5.3 5.2 5.1 5.0 4.8

Installation position AnyAmbient temperature range °C –30to+50(NBRseals)

–20to+50(FKMseals)

hydraulicMaximum operating pressure –PortB bar 3501)

Maximum inlet pressure –PortB bar 3501)

Maximum outlet pressure – Port … bar 3501)

Operating pressure range – Port A bar 10 to 350 1)

Maximumbackpressure – Port Y bar 3501)

Minimal set pressure bar Flow-dependent(seecharacteristiccurvespage5)Maximum set pressure bar 50; 100; 200; 315; 3501)

Maximum flow – Subplate mounting l/min 150 – 300 – 400– Threaded connection l/min 150 300 300 400 400

Hydraulicfluid See table belowHydraulicfluidtemperaturerange °C –30to+80(NBRseals)

–20to+80(FKMseals)Viscosity range mm2/s 10 to 800Maximum permitted degree of contamination of the hydraulic fluid-cleanlinessclassaccordingtoISO4406(c)

Class 20/18/152)

1)350baronlypossiblewithversionwithoutcheckvalve 2) The cleanliness classes specified for the components must be adhered to in hydraulic systems. Effective filtration pre-vents faults and at the same time increases the service life of the components.

For the selection of the filters see www.boschrexroth.com/filter.

Hydraulic fluid Classification Suitable sealing materials StandardsMineral oils and related hydrocarbons HL,HLP,HLPD NBR,FKM DIN 51524

Environmentally compatible

– Insoluble in waterHETG NBR,FKM

ISO 15380HEES FKM

– Soluble in water HEPG FKM ISO 15380

Flame-resistant– Water-free HFDU,HFDR FKM ISO 12922

– Water-containing HFC(FuchsHydrotherm46M,PetroferUltraSafe620) NBR ISO 12922

Important information on hydraulic fluids!– For more information and data on the use of other hydrau-

lic fluids refer to data sheet 90220 or contact us!– There may be limitations regarding the technical valve data(temperature,pressurerange,servicelife,mainte-nanceintervals,etc.)!

– Flame-resistant – water-containing: •Maximumoperatingpressure210bar•Maximumhydraulicfluidtemperature60°C• ExpectedservicelifeascomparedtoHLPhydraulicoil

30 % to 100 %

50 100 150 250 400

50

100

200

250

300

150

300

350

200 350

315

1 2 3

00

2

4

8

10

14

6

16

12

5 6

7

1 2 3

050 100 150 250 400300200 3500

4


Outlet pressure pA depending on the flow qV (B to A)

Flow in l/min →

Out

let p

ress

ure

in b

ar →

Flow in l/min →

Redu

ced

pres

sure

in b

ar →

Minimum set pressure with pA min depending on the flow qV (B to A)

1 Size 102 Size 253 Size 32

1 Size 102 Size 253 Size 324 pA min

Performance limit (system-dependent)5 Size 106 Size 257 Size 32

Characteristic curves(measuredwithHLP46,ϑoil=40°C±5°C)

The characteristic curves apply to the pressure at the valve output pT = 0 bar across the entire flow range.

2

4

8

10

14

6

12

1

2 3

50 100 150 250 400300200 3500

0,5

1,0

1,5

1 2 3

50 100 150 250 400300200 35000

4

5


∆p-qV characteristic curves (B to A; lowest pressure differential adjustable)

Flow in l/min →

Pres

sure

diff

eren

tial in

bar

→

Flow in l/min →

Pilo

t flo

w in

l/m

in →

Pilot flow depending on flow (B to A) and pressure differential

Characteristic curves(measuredwithHLP46,ϑoil=40°C±5°C)


1 Size 102 Size 253 Size 324 ∆p = 50 bar5 ∆p = 200 bar

10

20

30

15

25

5

1

2 3

050 100 150 250 400300200 3500


∆p-qV characteristic curves across the check valve (A to B)

Flow in l/min →

Pres

sure

diff

eren

tial in

bar

→Characteristic curves(measuredwithHLP46,ϑoil=40°C±5°C)

Flowresistanceacrosscheckvalve,mainstageclosedFlowresistanceacrosscheckvalvewithcompletelyopenedmainstage


Y

4 7 3 5; 6 82.2

1

21

09

8

3

4029

X Y

1011

16

1415

1213

285161

35

11,5

32 44

3129

4

98,4

37,56

49110

118145

169 18

G1/4; 12

5

2

323520

39,5

2.1


Unit dimensions: TypeDRC…;cartridgevalve(dimensionsinmm)

1 Name plate2.1 Y port for pilot oil return external2.2 Y port optionally for pilot oil return external

3 Adjustmenttype"4"4 Adjustmenttype"5"5 Adjustmenttype"6"6 Adjustmenttype"7"7 HexagonSW108 Spacerequiredtoremovethekey9 Valve mounting bores

10 Seal rings11 Main spool insert12 Seal ring13 Seal ring14 Seal ring15 Support ring16 Support ring

Valve mounting screws (separateorder)4 hexagon socket head cap screws ISO 4762 - M8 x 40 - 10.9-flZn-240h-L with friction coefficient µtotal = 0.09 to 0.14, TighteningtorqueMA = 31 Nm ±10 %, Material No. R913000205

Installation bore, see page 12.

90

Ø32

49

Ø35

110118

145169 18

5

4413

4

20

114D

1

Y

2

T11

47

56

72

T1

1

D1

5 17

80 Ø72

B

A

11

G1/4; 12

Ø25

G1/4; 12

5,5

ØD2

ØD

2

Ø39

,5

4 7 3 5; 6 82.1

17

9

1

21

09

8

3


Unit dimensions: TypeDR…;threadedconnection(dimensionsinmm)

Size D1 ØD2 T110 G1/2 34 1416(TypeDR15G…) G3/4 42 1625(TypeDR20G…) G1 47 1825(TypeDR25G…) G11/4 58 2032(TypeDR30G…) G11/2 65 22

1 Name plate2.1 Y port for pilot oil return external

3 Adjustmenttype"4"4 Adjustmenttype"5"5 Adjustmenttype"6"6 Adjustmenttype"7"7 HexagonSW108 Spacerequiredtoremovethekey9 Valve mounting bores

17 Pressure gauge connection

32

49

35

110118

145169 18

5

H1

20Y

2

G1/4; 12

39,5

4 7 3 5; 6 82.2

21

09

8

3

Y

5

16

6 5

H3

H2

A B

Y

L6L5L3

L4L2L15

B2B1

X

L7L8

L9L10

29B5

B4 B3

11 9

G1/4; 1217 18 2.1

9

1 19 20

A

0,01/100

Rzmax 4


Unit dimensions: TypeDR…;subplatemounting(dimensionsinmm)

Size L1 L2 L3 L4 L5 L6 L7 L8 L9 L1010 96 35.5 33 42.9 21.5 – 7.2 21.5 31.8 35.825 116 37.5 35.4 60.3 39.7 – 11.1 20.6 44.5 49.232 145 33 29.8 84.2 59.5 42.1 16.7 24.6 62.7 67.5

Size B1 B2 B3 B4 B5 H1 H2 H310 85 50 66.7 58.8 7.9 112 92 2825 102 59.5 79.4 73 6.4 122 102 3832 120 76 96.8 92.8 3.8 130 110 46

Item explanations, subplates, and valve mounting screws, see page 11.

Requiredsurfacequalityofthevalve mounting face


Unit dimensions

1 Name plate2.1 Y port for pilot oil return external2.2 Y port optionally for pilot oil return external

3 Adjustmenttype"4"4 Adjustmenttype"5"5 Adjustmenttype"6"6 Adjustmenttype"7"7 HexagonSW108 Spacerequiredtoremovethekey9 Valve mounting bore

17 Pressure gauge connection18 IdenticalsealringsforportsAandB;

identical seal rings for ports X and Y19 PortBwithoutfunction(blindhole)20 Locatingpin

Subplate mounting:Subplates according to data sheet 45062 (separateorder)–Size10 G460/01(G3/8) G461/01(G1/2) –Size20 G412/01(G3/4) G413/01(G1) –Size30 G414/01(G11/4) G415/01(G11/2)

Valve mounting screws(separateorder)– Size 10

4 hexagon socket head cap screws metric ISO 4762 - M10 x 50 - 10.9-flZn-240h-L with friction coefficient µtotal = 0.09 to 0.14, TighteningtorqueMA = 60 Nm ±10 %, Material no. R913000471

– Size 20 4 ISO 4762 - M10 x 60 - 10.9-flZn-240h-L with friction coefficient µtotal = 0.09 to 0.14, TighteningtorqueMA = 60 Nm ±10 %, Material no. R913000116

– Size 30 6 ISO 4762 - M10 x 70 - 10.9-flZn-240h-L with friction coefficient µtotal = 0.09 to 0.14, TighteningtorqueMA = 60 Nm ±10 %, Material no. R913000126

B

28,5+0,132H745

29 0,2 26 0,2

A

X Y

B

0,00

8

B0,

052

x 45

2 x

45

4

Rz 8

Rz 16

max R0,3

6

M4; 6

A

18

24,8+0,2

Rz 8

4 2 x

30

25,5

17

340,

01/1

0032 40

+0,

1

42+

0,1

+0,

05

51,5

0,1

55

Rzmax 4

A0,02

2 13

“Z”

32

X Y

61

44

4 x M8; 121651

32

BoschRexrothAG HydraulicsZum Eisengießer 197816LohramMain,Germany Phone +49(0)9352/18-0 Fax +49(0)9352/[email protected] www.boschrexroth.de

© This document, as well as the data, specifications and other informa-tionsetforthinit,aretheexclusivepropertyofBoschRexrothAG.Itmay not be reproduced or given to third parties without its consent.The data specified above only serve to describe the product. No state-ments concerning a certain condition or suitability for a certain applica-tion can be derived from our information. The information given does not release the user from the obligation of own judgment and verification. It must be remembered that our products are subject to a natural process of wear and aging.


Installation bore (dimensionsinmm)

View "Z"

1 Note! The Ø32 bore can tap a Ø45 bore atanypoint.However,itmustbe observed that the connection bores and the valve mounting bores are not damaged!

2 A support ring and seal rings must be inserted into the bore before assembly of the main spool

3 Nozzle, separate order

Pressure reducing valve, Replaces: 02.03 direct operated reducing valves.pdf · 2/8 Bosch Rexroth...

Documents

Transcript of Pressure reducing valve, Replaces: 02.03 direct operated reducing valves.pdf · 2/8 Bosch Rexroth...