Pressure Piping System - fespk. · PDF filePRESSURE PIPING SYSTEM BELL - MOUTH PIPES (RUBBER...
Transcript of Pressure Piping System - fespk. · PDF filePRESSURE PIPING SYSTEM BELL - MOUTH PIPES (RUBBER...
Pressure PipingSystem
profile
In 1971, PALING Industries was established to produce uPVC
pipes and fittings in Malaysia and through the years has expanded
its wide range of products from pipes and fittings to sanitary
products like plastic cisterns and other accessories for various
applications in water and building industries.
In 2001, PALING entered into a global partnership with the
Etex Plastics Group, now known as Aliaxis, a world leader in
plastic piping systems. With a reputation equally based on
the same high principles of customer service, product
excellence and technical innovation, a substantial investment
program has taken place to support these common aims.
Stringent factory quality control, key to our success
Strict internal control over our products enables PALING to
meet the relevant Malaysian, British, Australian, American and
Japanese high standards and to be certified by SIRIM
(Standard and Industrial Research Institute of Malaysia). Such
certifications enable us to obtain local authorities approvals for
use in the public and private projects and such rigor, help us
build a reputation of excellence amongst the most demanding
international contractors, for products meeting daily the
highest demanding architectural and structural requirements.
It is not surprising then that the task of supplying the required
pipes and fittings to mega projects such as KLCC (one of the
tallest building in the world), KLIA (Kuala Lumpur International
Airport) and Putrajaya (the new Administrative Center of the
Federal Government of Malaysia) was best awarded to the
specialist who has the resources, expertise and experience to
meet the intricate and challenging specification requirement.
Wide range of innovative products, key to your success
The unmistakable reliable quality and adaptability has resulted
in PALING products being widely used from classic to
high-tech infrastructure projects such as water supply,
construction of buildings and telecommunication, qualifying
PALING in playing the significant role in national development.
PALING's product ranges from uPVC pressure pipes and
fittings, soil, waste and vent (SWV) system, underground
sewer system, rainwater piping system to telecom and
electrical conduits. Accurate control of dimensions &
performance, excellent hydraulic flow characteristics,
economical and simple to install features are among the
benefits of using PALING products.
It's no wonder the versatile and comprehensive ranges of
PALING products receive recognition among authorities and
contractors who are discerning in their choice of piping
system.
PROFILE
profile
Technical and CommercialAssistance for
every technicaladvice on building site
For a quick supplyto your building site
delivery within72 hours
To date, thousands of kilometers of PALING piping are in service in water mains, soil, waste and vent (SWV) system, underground sewage scheme, as well as fibre optic cable network. In line with the company’s commitment to product quality, PALING Industries has been continuously engaged in enhancing its material formulation, processing equipment and tools, and testing facilities in order to improve the performance and reliability of its products.
Our technical and sales teams assure an active presence at site and dedicate their time to acquaint clients with our product range. Our technical department answers every special demand and proposes solutions to clients’ requirement.
PALING supplies more than 1200 items through an extensive network of specialized distributors equipped with modern and efficient logistic, ensuring delivery, throughout major towns in peninsular Malaysia within 72 hours.*
* Subject to Terms and Conditions.
OUR SERVICESPaling Industries has for more than 30 years been directly involved in the manufacture and supply of uPVC pipes and fittings for pressure and non-pressure applications as well as plastic sanitary products in the building and construction industries.
For all your specific needs on parts and fittings, we provide custom-made products to meet your specification.To meet your specification, our team of engineers studies your special request in order to produce according to your specific needs.
CUSTOM-MADE PRODUCT SERVICES
profile
Our Concept• To provide comprehensive knowledge • To upgrade skills• To improve qualifications and competencies
Our TargetPALING is to ensure that the applicant demonstrates his or her ability to properly prepare and assemble plastic plumbing materials used in plumbing systems.
Subjects • Plumbing • Water Reticulation • Sewerages • Sanitary
TRAINING CENTER In this competitive age where customer’s satisfaction prevails, we believe in working hand in hand with our fellow installers to ensure continuous product reliability and excellent workmanship to secure a niche in the market. In Paling, despite offering our customers premium quality products, we are also here to share our years of experience in this industry. Well equipped with technical expertise that has mature jobsite experience, our training centre offers programs that impart invaluable knowledge and introduces practical skills of good work practices to optimize the quality of any installation. In addition, we share insights of standards and regulations to keep our partners in the industry abreast of the latest development.
The quality of the solvent cemented joint determines the effectiveness of the plastic pipe system as a whole. For this reason, we offer data sheets, booklets, an installation video, installation training and certification seminars as complete educational packages to those who take good joining techniques as seriously as we do.
certification
For years, PALING'S range of uPVC Pipes and Fittingshas its quality controlled, approved and certified by SIRIM and NSF
OFFICIAL CERTIFICATION
PLEASE CONTACT OUR SALES TEAM
Tel : 603 - 6189 8333 (General) 603 - 6189 6389 (Sales)Fax : 603 - 6188 3810Email : Domestic [email protected] Export [email protected]
Bell-mouth Pipes(Rubber Ring Joint)
STANDARD &QUALIFICATION
PRESSURE PIPING SYSTEMBELL - MOUTH PIPES (RUBBER RING JOINT)
01
Lead Free formulation - Our commitment in contributing to a better environment.
Bell - Mouth Pressure Pipes
Standard and Qualification
The Rubber Ring Joint Pressure Pipe has a watertight
joint for use in pressure of 6 to 15 bar applications.
The Spigot and socket type joint is formed with a widening
of the wall of the pipe on one end. The joint is then sealed
with a rubber ring.
The Rubber Ring system is located on the tip of the
spigot end of the pipe. When the pipes are joined,
the rubberring is compressed from the tip down the
barrel. The seal is formed betweenthe Socket and the
Spigot end.
Pipe Marking
Safe & Environmentally Friendly
1: The word "PALING" or Paling Logo with the word "PALING"2: The word SIRIM CERTIFIED or MS Logo3: SIRIM License number4: Standard conformance and year of standard5: Nominal size6: Pressure rating7: Batch8: Manufacturing date9: Manufacturing Shift code10: Lead Free
PALING SIRIM CERTIFIED PP005815 BS4576/1:1989 110mm Class B Batch 130303 A LEAD FREE
specification/certification
Official CertificationFor years, PALING's range of uPVC Pressure
Pipes & Fittings has its quality controlled,
approved and certified by SIRIM
BELL - MOUTH PIPES(RUBBER RING JOINT)
PIPES
02 product
Bell-mouth Pipes Manufactured in compliance with:• MS 628 : 1999• BS 3505 : 1986• BS 3506 : 1969• BS 4346 : Pt.2 : 1970
Rubber Ring manufactured to:• BS 2494 : 1990• AS 1646 : 1992
E
D1
A
6m
A
D
PRESSURE PIPE - CLASS BCODE NO. NOM. MEAN OUTSIDE WALL THICKNESS SIZE DIAMETER D (mm) e (mm) A E D1 (mm) min max min max (mm) (mm) (mm)
Pressure rating: 6 bar
Supplied with Bell-mouth socket at one end and chamfered at the other end for easy push in using rubber ring. For flexible joint connections in water pipeline applications.
1101 080 60 B 80 88.7 89.1 2.9 3.4 118 20 1201101 100 60 B 100 114.1 114.5 3.4 4.0 128 23 1501101 155 60 B 155 168.0 168.5 4.5 5.2 150 27 2131101 200 60 B 200 218.8 219.4 5.3 6.1 168 34 267
PRESSURE PIPE - CLASS CCODE NO. NOM. MEAN OUTSIDE WALL THICKNESS SIZE DIAMETER D (mm) e (mm) A E D1 (mm) min max min max (mm) (mm) (mm)
Pressure rating: 9 bar
1101 080 60 C 80 88.7 89.1 3.5 4.1 118 20 1201101 100 60 C 100 114.1 114.5 4.5 5.2 128 23 1501101 155 60 C 155 168.0 168.5 6.6 7.6 150 27 2131101 200 60 C 200 218.8 219.4 7.8 9.0 168 34 267
PRESSURE PIPE - CLASS DCODE NO. NOM. MEAN OUTSIDE WALL THICKNESS SIZE DIAMETER D (mm) e (mm) A E D1 (mm) min max min max (mm) (mm) (mm)
Pressure rating: 12 bar
1101 080 60 D 80 88.7 89.1 4.6 5.3 118 20 1201101 100 60 D 100 114.1 114.5 6.0 6.9 128 23 1501101 155 60 D 155 168.0 168.5 8.8 10.2 150 27 2131101 200 60 D 200 218.8 219.4 10.3 11.9 168 34 2671101 250 60 D 250 272.6 273.4 12.8 14.8 191 41 3291101 300 60 D 300 323.4 324.3 15.2 17.5 211 47 387
PRESSURE PIPE - CLASS ECODE NO. NOM. MEAN OUTSIDE WALL THICKNESS SIZE DIAMETER D (mm) e (mm) A E D1 (mm) min max min max (mm) (mm) (mm)
Pressure rating: 15 bar
1101 080 60 E 80 88.7 89.1 5.7 6.6 118 20 1201101 100 60 E 100 114.1 114.5 7.3 8.4 128 23 1501101 155 60 E 155 168.0 168.5 10.8 12.5 150 27 2131101 200 60 E 200 218.8 219.4 12.6 14.5 168 34 2671101 250 60 E 250 272.6 273.4 15.7 18.1 191 41 3291101 300 60 E 300 323.4 324.3 18.7 21.6 211 47 387
03
BELL - MOUTH PIPES(RUBBER RING JOINT)
90˚ BENDCODE NO. NOM. MEAN OUTSIDE SOCKET RADIUS SIZE DIAMETER D (mm) LENGTH R (mm) min max L (mm) (mm)
2130 080 80 88.7 89.1 135.0 2622130 100 100 114.1 114.5 145.0 3852130 155 155 168.0 168.5 165.0 700
Fabricated from pipe
45˚ BENDCODE NO. NOM. MEAN OUTSIDE SOCKET RADIUS SIZE DIAMETER D (mm) LENGTH R (mm) min max L (mm) (mm)
2131 080 80 88.7 89.1 135.0 2622131 100 100 114.1 114.5 145.0 3852131 155 155 168.0 168.5 165.0 700
Fabricated from pipe
LR
D
L
R
D
L
R
D
D
TL
L
22.5˚ BENDCODE NO. NOM. MEAN OUTSIDE SOCKET RADIUS SIZE DIAMETER D (mm) LENGTH R (mm) min max L (mm) (mm)
2132 080 80 88.7 89.1 135.0 2622132 100 100 114.1 114.5 145.0 3852132 155 155 168.0 168.5 165.0 700
Fabricated from pipe
DOUBLE END SOCKETCODE NO. NOM. MEAN OUTSIDE SOCKET RADIUS SIZE DIAMETER D (mm) LENGTH TL (mm) min max L (mm) (mm)
2133 080 80 88.7 89.1 135.0 293.02133 100 100 114.1 114.5 145.0 341.02133 155 155 168.0 168.5 165.0 382.02133 200 200 218.8 219.4 185.0 425.02133 250 250 272.6 273.4 210.5 481.02133 300 300 323.4 324.3 227.9 526.0
Fabricated from pipe
FITTINGS
product
04
TECHNICAL INFORMATIONS
Jointing Methodfor Rubber Ring Joint
2. Clean the exterior of the pipe before applying the lubricant
3. Apply lubricant on spigot
4. Insert the pipe until the white line
When the rings are colour coded, be sure to consult the pipe manufacturer or their literature for the difference. In all cases, clean the ring, the socket or the coupling interior, especially the groove (except when the ring is permanently installed) and the spigot with a rag, brush or paper towel to remove any dirt or foreign material before assembling. Inspect the ring, pipe spigot chamber, ring groove and sealing surfaces for damages or deformation. Use only rings which are designed for and supplied with the pipe. Insert them as recommended by the manufacturer.
Lubricant should be applied as specified by the pipe manufacturer. Bacterial growth, damage to gaskets or the pipe, may result from the use of non-approved lubricants. Use only the lubricant supplied by the pipe manufacturer.
While keeping the lengths in proper alignment, brace the socket and push the spigot
into the bell. The spigot should be inserted until the reference mark on the pipe barrel is
even with the edge of the socket.
with Rubber Ring Joints
Assembly of Pipes
The assembly of one pipe to another may be performed using various methods. One of the most successful methods employs a rubber ring joint. The rubber ring joint may be either of integral socket design (formed as a continuous, homogeneous entity with the pipe) or it may consist of a separate sleeve-type coupling. The joint provides the following advantages:
Allowance for expansion and contraction.
Reliably assembled in poor weather conditions.
Consistent reliability.
Flexibility and resiliency.
Labour saving and overall economical.
Ease of installation.
Jointing Method
Use only the lubricant suppliedby Paling Industries Sdn Bhd
1. Clean dirt and grit from socket
BELL - MOUTH PIPES(RUBBER RING JOINT)
technical informations
05
TECHNICAL INFORMATIONS
Advantages of Bell-Mouth
Application advantages of Paling Bell-Mouth Rubber Ring
Joint (RRJ) piping fitted with the locked-in pipe seal:
High burst strength and high impact strength.
Thickened pipe wall at the socket ensures rigidity and
circularity are maintained under high external load and
internal pressure.
The seal is fitted in the pipe socket at the factory,
making pipe-laying work easier and faster.
Accurately formed seal groove ensures that the
locked-in seal is securely positioned in the groove
during transport and assembly. Risk of seal
displacement during installation is eliminated.
Exclusive seal design maximizes the advantages of
both sealing principles in a combined lip and
compression seal. It reduces the assembly force
required and absorbs any permissible variations in the
groove.
Sealing can withstand extremely high pressure without
the seal being dislodged. No risk of pulsation leak due
to wide pressure fluctuations in the pipeline.
Application advantages of Paling Bell-Mouth Rubber Ring
Joint (RRJ) piping fitted with dual hardness pipe seal:
One piece construction seal with Hard and Soft rubber
bonded firmly together.
Hard rubber for retaining. Soft rubber for sealing.
No loose retaining ring of device needed.
Designed to be retained tightly in the socket groove
and yet, can be removed for cleaning purposes prior
to assembly.
The exclusive “DOUBLE COMPRESSION LIPS” design
gives extra compression, hence provides additional
sealing performance against spigot and socket.
The sealing lip is designed to prevent sand and / or
other foreign particles from penetrating the joint.
Joint with Locked-in Pipe Seal
Joint with Dual Hardness Pipe Seal
BELL - MOUTH PIPES (RUBBER RING JOINT)
technical informations
(Rubber Ring Joint)mPVC
07
DTP Technology
Ductile Thermoplastic Pipes (DTP) are formulated from special grades of Polyvinyl Chloride (PVC) and modifiers to provide a pipe with the strength of uPVC and supreme toughness / ductility integrated into its characteristic.
Ductile Thermoplastic Pipes are tough, high performance thermoplastic pipes which incorporate advance technology to give superior physical characteristics. These include higher impact resistance, greater ductility, reduced weight and an increase in hydraulic capacity.
Ductile Thermoplastic Pipes have been in use for a number of years overseas, specifically in Britain, USA and South Africa. They were initially used in the mining industry to provide a rugged piping system that was safe to use in confined spaces where failure could result in fatalities. The use of DTP Technology in water supply applications is a logical progression to supply a cost effective product that can withstand the rigours of the water industry.
Application• Potable water supply lines
• Water Reticulation
• Industrial process piping.
specification
08
Impact StrengthHydrotech pipes show extraordinary impact resistance when tested with a falling mass, which is the standard method for testing DTP pipes. Hydrotech pipes will not shatter when a minimum mass of 10kg is dropped from 20 meters height, subjecting the pipe to an impact force of at least 2500 joules. The impact striker does not penetrate the top surface of the pipe, providing the pipe’s great toughness and ductility.
A 20m height impact test tower
Cost EffectiveThe smooth interior surface virtually eliminates encrustants such as calcium from adhering to its surface. Due to its unsurpassed Hazen Williams coefficient of C=150, Hydrotech pipes provides substantial savings through reduced pumping costs.
Optimum FlowHydrotech provides better hydraulic performance than other pipes because of its higher SDR (ratio of wall thickness to OD of pipe). This means that greater flow rates can be achieved with Hydrotech pipes compare with the equivalent size and class in standard pipes due to increased internal bore size.
Toughness of the pipes demonstrated by point loading the pipe with a rock
ToughnessUnderground stresses that could place rigid pipes in jeopardy can easily be absorbed by the flexible strength of Hydrotech pipes. Such stresses as shear and flexure cannot reach damaging levels in Hydrotech pipes because or its ability to flex without damage.
The ductile nature of the pipes enable the spreading of the load and minimizing concentrated local stresses. This is demonstrated by point loading the pipe with a rock. The pipe adopts the contour of the rock, spreading the load and minimizing any localized stress.
specification
09
ApprovalApproval for underground usage by SIRIM for potable cold water lines.
Standard and SpecificationSABS 966 - 2
Hydrostatic test
Legendary corrosion resistance Hydrotech is a nonconductor and therefore immune to electrolytic attack. As a result, there is no need for costly linings or cathodic protection as is often required with other piping systems in aggressive environments.
Superior Abrasion Resistance Hydrotech pipe is highly resistant to abrasion, making it an ideal material for the transportation of abrasive slurries.
Safe and Environmentally Friendly Lead Free Formulation – our commitment in contributing to a better environment.
Hydrostatic Strength An extensive hydrostatic testing program has been undertaken in order to confirm the pressure resistance of Hydrotech pipes. This program ensures that the pipe is subjected to a full range of hydrostatic stresses to ensure the long term working life of the pipe. One of the stringent requirements is to perform a destructive hydrostatic test on the pipes. Instead of shattering under high pressure, the pipes will swell/bulge prior to leaking, demonstrating its ductility.
specification
10
Pipe Marking
PIPES
1. Paling logo2. Product name3. Lead Free marking4. SIRIM logo
5. SIRIM license number6. Standard7. Nominal size8. Pressure rating
9. Batch number10. Manufacturing date11. Manufacturing shift code
PN12 Code Nom. Mean outside Wall thickness A (mm) E (mm) D1 (mm) Size Diameter D (mm) e (mm) (mm) Min Max Min Max
1101 100 60 12 100 114.1 114.5 3.70 4.20 128 23 150
1101 155 60 12 155 168.0 168.5 5.45 6.15 150 27 213
1101 200 60 12 200 218.8 219.4 7.10 7.90 168 34 267
1101 250 60 12 250 272.6 273.4 8.80 9.90 191 41 329
Pressure Rating: 12 bar
PN20 Code Nom. Mean outside Wall thickness A (mm) E (mm) D1 (mm) Size Diameter D (mm) e (mm) (mm) Min Max Min Max
1101 100 60 20 100 114.1 114.5 6.00 6.70 128 23 150
1101 155 60 20 155 168.0 168.5 8.85 9.85 150 27 213
1101 200 60 20 200 218.8 219.4 11.55 12.85 168 34 267
1101 250 60 20 250 272.6 273.4 14.35 15.95 191 41 329
Pressure Rating: 20 bar
Pressure Rating: 16 bar
PN16 Code Nom. Mean outside Wall thickness A (mm) E (mm) D1 (mm) Size Diameter D (mm) e (mm) (mm) Min Max Min Max
1101 100 60 16 100 114.1 114.5 4.85 5.45 128 23 150
1101 155 60 16 155 168.0 168.5 7.15 7.85 150 27 213
1101 200 60 16 200 218.8 219.4 9.30 10.30 168 34 267
1101 250 60 16 250 272.6 273.4 11.60 12.80 191 41 329
Pipes (Bellmouth socket at one end)
D D1
e
E
6mA A
Dimension
product
11
HydrotechDTP TECHNOLOGY
FITTINGS
90° Bend (Fabricated from pipe)
45° Bend (Fabricated from pipe)
CODE NOM. MEAN OUTSIDE SOCKET RADIUS SIZE DIAMETER D (mm) Length R (mm) (mm) min max L(mm)
CODE NOM. MEAN OUTSIDE SOCKET RADIUS SIZE DIAMETER D (mm) Length R (mm) (mm) min max L(mm)
Fittings (Bellmouth socket at one end) A wide range of complimentary fittings is available for use with Hydrotech and conventional uPVC pressurepipes. There are variety bends and sockets for sizes up to 250mm diameter.
2131 100 16 100 114.1 114.5 145.5 385
2131 155 16 155 168.0 168.5 165.0 700
2131 200 16 200 218.8 219.4 185.0 800
2131 250 16 250 272.6 273.4 210.5 954
22.5° Bend (Fabricated from pipe)
2132 100 16 100 114.1 114.5 145.5 385
2132 155 16 155 168.0 168.5 165.0 700
2132 200 16 200 218.8 219.4 185.0 800
2132 250 16 250 272.6 273.4 210.5 954
Double End Socket (Fabricated from pipe)
2133 100 16 100 114.1 114.5 145.5 341
2133 155 16 155 168.0 168.5 165.0 382
2133 200 16 200 218.8 219.4 185.0 425
2133 250 16 250 272.6 273.4 210.5 481
2130 100 16 100 114.1 114.5 145.5 385
2130 155 16 155 168.0 168.5 165.0 700
2130 200 16 200 218.8 219.4 185.0 800
2130 250 16 250 272.6 273.4 210.5 954
CODE NOM. MEAN OUTSIDE SOCKET RADIUS SIZE DIAMETER D (mm) Length R (mm) (mm) min max L(mm)
CODE NOM. MEAN OUTSIDE SOCKET SIZE DIAMETER D (mm) Length TL (mm) (mm) min max L(mm)
product
12
TECHNICAL INFORMATIONS HydrotechDTP TECHNOLOGY
Jointing Method for Rubber Ring Joint
2. Clean the exterior of the pipe before applying the lubricant
3. Apply lubricant on spigot
4. Insert the pipe until the white line
When the rings are colour coded, be sure to consult the pipe manufacturer or their literature for the difference. In all cases, clean the ring, the socket or the coupling interior, especially the groove (except when the ring is permanently installed) and the spigot with a rag, brush or paper towel to remove any dirt or foreign material before assembling. Inspect the ring, pipe spigot chamber, ring groove and sealing surfaces for damages or deformation. Use only rings which are designed for and supplied with the pipe. Insert them as recommended by the manufacturer.
Lubricant should be applied as specified by the pipe manufacturer. Bacterial growth, damage to gaskets or the pipe, may result from the use of non-approved lubricants. Use only the lubricant supplied by the pipe manufacturer.
While keeping the lengths in proper alignment, brace the socket and push the spigot
into the bell. The spigot should be inserted until the reference mark on the pipe barrel is
even with the edge of the socket.
with Rubber Ring Joints
Assembly of Pipes
The assembly of one pipe to another may be performed using various methods. One of the most successful methods employs a rubber ring joint. The rubber ring joint may be either of integral socket design (formed as a continuous, homogeneous entity with the pipe) or it may consist of a separate sleeve-type coupling. The joint provides the following advantages:
Allowance for expansion and contraction.
Reliably assembled in poor weather conditions.
Consistent reliability.
Flexibility and resiliency.
Labour saving and overall economical.
Ease of installation.
Jointing Method
Use only the lubricant suppliedby Paling Industries Sdn Bhd
1. Clean dirt and grit from socket
technical informations
13
TECHNICAL INFORMATIONS
Advantages of Bell-Mouth
Application advantages of Paling Bell-Mouth Rubber Ring
Joint (RRJ) piping fitted with the locked-in pipe seal:
High burst strength and high impact strength.
Thickened pipe wall at the socket ensures rigidity and
circularity are maintained under high external load and
internal pressure.
The seal is fitted in the pipe socket at the factory,
making pipe-laying work easier and faster.
Accurately formed seal groove ensures that the
locked-in seal is securely positioned in the groove
during transport and assembly. Risk of seal
displacement during installation is eliminated.
Exclusive seal design maximizes the advantages of
both sealing principles in a combined lip and
compression seal. It reduces the assembly force
required and absorbs any permissible variations in the
groove.
Sealing can withstand extremely high pressure without
the seal being dislodged. No risk of pulsation leak due
to wide pressure fluctuations in the pipeline.
Application advantages of Paling Bell-Mouth Rubber Ring
Joint (RRJ) piping fitted with dual hardness pipe seal:
One piece construction seal with Hard and Soft rubber
bonded firmly together.
Hard rubber for retaining. Soft rubber for sealing.
No loose retaining ring of device needed.
Designed to be retained tightly in the socket groove
and yet, can be removed for cleaning purposes prior
to assembly.
The exclusive “DOUBLE COMPRESSION LIPS” design
gives extra compression, hence provides additional
sealing performance against spigot and socket.
The sealing lip is designed to prevent sand and / or
other foreign particles from penetrating the joint.
Joint with Locked-in Pipe Seal
Joint with Dual Hardness Pipe Seal
BELL - MOUTH PIPES (RUBBER RING JOINT)
technical informations
Plain-end Pipes(Solvent Cement Joint)
15
SPECIFICATION
specification/certification
PRESSURE PIPING SYSTEM PLAIN END PIPES (Solvent Cement Joint)
Pressure Pipes
Pressure Fittings
Fitting Marking
1: The word "PALING" or Paling Logo with the word "PALING"2: The word SIRIM CERTIFIED or MS Logo3: SIRIM License number4: Standard conformance and year of standard5: Nominal size6: Pressure rating7: Batch8: Manufacturing date9: Manufacturing shift code10: Lead Free
Standard and Qualification
Dimensions and performance meet the requirement of standards.
High quality of finish with smooth internal and external surfaces.
Provides low coefficient of flow friction.
Safe & Environmentally FriendlyLead Free Formulation - our commitment in contributing
to a better environment.
Wall thickness of fittings and materials are formulated
to achieve strength that exceeds the performance of standards.
High quality of finish with smooth internal and external surface.
Provides low coefficient of flow friction.
Pipe Marking
PALING products are accurately designed and formulated to consistently and continuously exceed the performance aspects of standards, especially in terms of hydrostatic pressure resistance. With SIRIM and ISO 9001:2000 certifications, they undoubtedly provide an independent assurance to users or customers that PALING products are manufactured under an effective system of inspection, testing, supervision and control.
Paling • The word "Paling" or Paling Logo 25mm • Nominal Size BS 4346/1 • Standard Conformance E • Pressure Rating
Official CertificationFor years, PALING's range of uPVC Pressure
Pipes & Fittings has its quality controlled,
approved and certified by SIRIM
PALING SIRIM CERTIFIED PP005808 MS 628:1982 20mm PN6 BATCH 130303 A LEAD FREE
16
PVC-U Pressure Piping
System
Plain-end Pipes (Solvent Cement Joint)
schedule
PRESSURE PIPING SYSTEM PLAIN END PIPES (Solvent Cement Joint)
CERTIFICATION SCHEDULE
PIPESTYPE NOM. SPECIFICATION SIZE (mm)
PN 6 80, 100, 155 & 200 MS 628:1999/ BS 4346:PT.2:1970PN 9 80, 100, 155, 200 MS 628:1999/ BS 4346:PT.2:1970PN 12 32, 40, 50, 65, 80, 100, 155, 200, 250 & 300 MS 628:1999/ BS 4346:PT.2:1970PN 15 15, 20, 25, 32, 40, 50, 65, 80, 100, 155, 200, 250 & 300 MS 628:1999/ BS 4346:PT.2:1970Class 7 15, 20, 25, 32, 40 & 50 BS 3506:1969/ BS 4346:PT.2:1970
TYPE NOM. SPECIFICATION SIZE (mm)
Double End Socket BS 4346: PT.1:1969 Class E 15, 20, 25, 32, 40 & 50End Cap BS 4346: PT.1:1969 Class E 15, 20, 25, 32, 40 & 50Equal Elbow BS 4346: PT.1:1969 Class D 80 & 100 Class E 15, 20, 25, 32, 40 & 50Equal Tee BS 4346: PT.1:1969 Class D 80 & 100 Class E 15, 20, 25, 32, 40 & 50Faucet Elbow BS 4346: PT.1:1969 Class D 32, 40 & 50 Class E 15, 20 & 25Faucet Socket BS 4346: PT.1:1969 Class E 15, 20, 25, 32, 40 & 50Reducing Bush BS 4346: PT.1:1969 Class E 20x15, 25x15, 25x20, 32x25, 40x25, 40x32 & 50x32Reducing Socket BS 4346: PT.1:1969 Class D 80x50, 100x80 Class E 20x15, 25x15, 25x20, 32x20, 32x25, 40x25, 40x32, 50x32 & 50x40Reducing Tee BS 4346: PT.1:1969 Class D 80x50, 100x80 Class E 20x15, 25x15, 25x20, 32x20, 32x25, 40x25, 40x32, 50x32 & 50x40Tank Connector BS 4346: PT.1:1969 Class E 15, 20 & 25Tap Connector BS 4346: PT.1:1969 Class E 15Valve Socket BS 4346: PT.1:1969 Class E 15, 20, 25, 32, 40 & 50
FITTINGS
17
PIPES
product
PRESSURE PIPING SYSTEM PLAIN END PIPES (Solvent Cement Joint)
PRESSURE PIPE - PN 6 (Class B)CODE NO. NOM. MEAN OUTSIDE WALL THICKNESS LENGTH SIZE DIAMETER D (mm) e (mm) L (m) (mm) min max min max
Pressure rating: 6 bar
Supplied in plain end or socket at one end for solvent weld connection to pipes or fittings.
Manufactured in compliance with:• MS 628 :1999• BS 3505 :1986• BS 3506 :1969
* Pipes available in solvent socket at one end
D
L
e
* 1102 080 60 B 80 88.7 89.1 2.9 3.4 6* 1102 100 60 B 100 114.1 114.5 3.4 4.0 6 * 1102 155 60 B 155 168.0 168.5 4.5 5.2 6 * 1102 200 60 B 200 218.8 219.4 5.3 6.1 6
PRESSURE PIPE - PN 9 (Class C)CODE NO. NOM. MEAN OUTSIDE WALL THICKNESS LENGTH SIZE DIAMETER D (mm) e (mm) L (m) (mm) min max min max
Pressure rating: 9 bar
* 1102 080 60 C 80 88.7 89.1 3.5 4.1 6* 1102 100 60 C 100 114.1 114.5 4.5 5.2 6* 1102 155 60 C 155 168.0 168.5 6.6 7.6 6* 1102 200 60 C 200 218.8 219.4 7.8 9.0 6
PRESSURE PIPE - PN 12 (Class D)CODE NO. NOM. MEAN OUTSIDE WALL THICKNESS LENGTH SIZE DIAMETER D (mm) e (mm) L (m) (mm) min max min max
Pressure rating: 12 bar
1100 032 40 D 32 42.1 42.4 2.2 2.7 4 1100 040 40 D 40 48.1 48.4 2.5 3.0 4 1100 050 40 D 50 60.2 60.5 3.1 3.7 4* 1102 065 60 D 65 75.0 75.3 3.9 4.5 6* 1102 080 60 D 80 88.7 89.1 4.6 5.3 6* 1102 100 60 D 100 114.1 114.5 6.0 6.9 6* 1102 155 60 D 155 168.0 168.5 8.8 10.2 6* 1102 200 60 D 200 218.8 219.4 10.3 11.9 6* 1102 250 60 D 250 272.6 273.4 12.8 14.8 6 1100 300 60 D 300 323.4 324.3 15.2 17.5 6
18product
PRESSURE PIPING SYSTEMPLAIN END PIPES (Solvent Cement Joint)
PIPES
PRESSURE PIPE - PN 15 (CLASS E)CODE NO. NOM. MEAN OUTSIDE WALL THICKNESS LENGTH SIZE DIAMETER D (mm) e (mm) L (m) (mm) min max min max
Supplied in plain end or socket at one end for solvent weld connection to pipes or �ttings.
Manufactured in compliance with:• MS 628 :1999• BS 3505 :1986• BS 3506 :1969
* Pipes available in solvent socket at one end
D
L
e
1100 015 40 E 15 21.2 21.5 1.7 2.1 4 1100 020 40 E 20 26.6 26.9 1.9 2.5 4 1100 025 40 E 25 33.4 33.7 2.2 2.7 4 1100 032 40 E 32 42.1 42.4 2.7 3.2 4 1100 040 40 E 40 48.1 48.4 3.1 3.7 4 1100 050 40 E 50 60.2 60.5 3.9 4.5 4* 1102 065 60 E 65 75.0 75.3 4.8 5.5 6* 1102 080 60 E 80 88.7 89.1 5.7 6.6 6* 1102 100 60 E 100 114.1 114.5 7.3 8.4 6* 1102 155 60 E 155 168.0 168.5 10.8 12.5 6* 1102 200 60 E 200 218.8 219.4 12.6 14.5 6* 1102 250 60 E 250 272.6 273.4 15.7 18.1 6 1100 300 60 E 300 323.4 324.3 18.7 21.6 6
PRESSURE PIPE - CLASS 6CODE NO. NOM. MEAN OUTSIDE WALL THICKNESS PRESSURE LENGTH SIZE DIAMETER D (mm) e (mm) RATING L (m) (mm) min max min max (bar)
1100 015 40 6 15 21.2 21.5 2.8 3.3 28 4 1100 020 40 6 20 26.6 26.9 2.9 3.4 22 4 1100 025 40 6 25 33.4 33.7 3.4 4.0 24 4
Pressure rating: 15 bar
PRESSURE PIPE - CLASS 7CODE NO. NOM. MEAN OUTSIDE WALL THICKNESS PRESSURE LENGTH SIZE DIAMETER D (mm) e (mm) RATING L (m) (mm) min max min max (bar)
1100 015 40 7 15 21.2 21.5 3.7 4.3 40 41100 020 40 7 20 26.6 26.9 3.9 4.5 32 41100 025 40 7 25 33.4 33.7 4.5 5.2 32 41100 032 40 7 32 42.1 42.4 4.8 5.5 28 41100 040 40 7 40 48.1 48.4 5.1 5.9 25 41100 050 40 7 50 60.2 60.5 5.5 6.3 22 4
19
FITTINGS
product
PRESSURE PIPING SYSTEM PLAIN END PIPES (Solvent Cement Joint)
CODE NO. NOM. DIMENSIONS SIZE (mm) (mm) L A B D
* Imported fittings from Aliaxis+ Nominal Dimensions
2103 015 15 24.0 12.0 15.0 21.6 2103 020 20 26.0 28.0 28.0 27.0 2103 025 25 26.0 21.0 18.0 33.8 2103 032 32 32.0 33.5 33.5 42.5 2103 040 40 37.5 25.0 27.0 48.6 2103 050 50 43.0 43.0 43.0 60.7* 2EGGHHVNN 65 44.0 40.5 40.5 65 + 2103 080 80 51.0 44.0 53.0 89.4 2103 100 100 64.0 73.0 70.0 114.8* 2EGGLLVTT 155 90.0 90.0 90.0 155 +* 2EGGLLVVV 200 115.5 169.5 169.5 200 +
EQUAL ELBOWTo solvent weld pipes at both ends.
D
L A
B
L
CODE NO. NOM. DIMENSIONS SIZE (mm) (mm) L A B D
2104 015 15 23.0 78.0 79.0 21.6 2104 020 20 24.0 79.0 79.0 27.0 2104 025 25 27.0 106.0 108.0 33.8 2104 032 32 40.0 72.0 83.0 42.5 2104 040 40 44.0 168.5 171.4 48.6 2104 050 50 48.0 233.0 220.0 60.7 2104 065 65 60.0 245.9 244.3 75.5 2104 080 80 77.0 245.0 227.0 89.4 2104 100 100 97.0 311.0 315.9 114.8 2104 155 155 140.5 559.0 650.5 168.9 2104 200 200 181.0 1200.0 1200.0 219.8 2104 250 250 224.0 1463.1 1463.1 273.9 2104 300 300 264.5 1661.3 1161.3 324.8
Fabricated from pipe
90º BENDTo solvent weld to pipes at both ends.
L A
B
LD
FAUCET ELBOW
CODE NO. NOM. DIMENSIONS SIZE (mm) (mm) L A T D
2102 015 15 24.5 17.5 28.0 21.6 2102 020 20 23.0 21.0 28.0 27.0 2102 025 25 26.0 26.0 37.0 33.8 2102 032 32 29.0 26.0 37.0 42.5 2102 040 40 34.5 25.5 35.0 48.6 2102 050 50 33.0 34.0 43.0 60.7* 2EGGHFVNN 65 44.0 64 + 30.2 65 +* 2EGGLFVPP 80 51.0 76 + 33.3 80 +* 2EGGLFVQQ 100 63.0 102 + 39.3 100 +
* Imported fittings from Aliaxis+ Nominal Dimensions
To connect faucet or ball valve to uPVC water supply line. Threaded at one end and solvent weld to pipe on the other end.
A
T
D
L
20 product
PRESSURE PIPING SYSTEM PLAIN END PIPES (Solvent Cement Joint)
FITTINGS
CODE NO. NOM. DIMENSIONS SIZE (mm) (mm) L C L1 D
* Imported fittings from Aliaxis+ Nominal Dimensions
2106 015 15 24.5 27.0 25.0 21.6 2106 020 20 28.0 32.0 27.0 27.0 2106 025 25 26.0 32.0 25.0 33.8 2106 032 32 34.0 57.0 31.0 42.5 2106 040 40 38.0 50.0 35.0 48.6 2106 050 50 43.0 71.0 37.0 60.7* 2ETTHHVNN 65 44.0 81.0 44.0 65 + 2106 080 80 51.0 92.0 50.0 89.4 2106 100 100 61.0 129.0 62.0 114.8* 2ETTLLVTT 155 90.0 180.0 90.0 155 +* 2ETTLLVVV 200 115.5 232.0 155.5 200 +
EQUAL TEETo solvent weld to pipes at both ends.
CODE NO. NOM. DIMENSIONS SIZE (mm) (mm) L C L1 D D1
2107 020 015 20x15 23.0 29.0 22.0 27.0 21.62107 025 015 25x15 26.0 42.0 22.0 33.8 21.62107 025 020 25x20 26.0 32.5 23.0 33.8 27.02107 032 020 32x20 32.0 25.0 23.0 42.5 27.02107 032 025 32x25 32.0 54.0 26.0 42.5 33.82107 040 025 40x25 38.0 18.8 28.0 48.6 33.82107 040 032 40x32 38.0 42.0 34.0 48.6 42.52107 050 032 50x32 41.5 44.0 32.5 60.7 42.52107 050 040 50x40 41.5 65.0 35.6 60.7 48.62107 080 050 80x50 60.0 65.0 43.5 89.4 60.72107 100 080 100x80 72.0 89.0 60.0 114.8 89.4
REDUCING TEETo solvent weld to pipes or fittings at each end.
45˚ BEND
CODE NO. NOM. DIMENSIONS SIZE (mm) (mm) L A D
2105 015 15 23.0 39.0 21.6 2105 020 20 24.0 50.0 27.0 2105 025 25 27.0 65.0 33.8 2105 032 32 40.0 130.0 42.5 2105 040 40 44.0 103.3 48.6 2105 050 50 48.0 160.0 60.7 2105 065 65 60.0 152.9 75.5 2105 080 80 77.0 210.0 89.4 2105 100 100 97.0 186.5 114.8 2105 155 155 140.5 247.0 168.9
To solvent weld to pipes at both ends.
D
L
A
A
L
L
L
C
D
D
L1
L
C
L
D
D1
L1
Fabricated from pipe
21
FITTINGS
product
PRESSURE PIPING SYSTEM PLAIN END PIPES (Solvent Cement Joint)
CODE NO. NOM. DIMENSIONS SIZE (mm) (mm) L L1 D D1
2110 020 015 20x15 16.0 20.0 26.7 21.6 2110 025 015 25x15 19.0 28.0 33.5 21.6 2110 025 020 25x20 18.5 28.0 33.5 27.0 2110 032 025 32x25 27.5 31.0 42.2 33.8 2110 040 025 40x25 26.0 35.0 48.2 33.8 2110 040 032 40x32 30.0 35.0 48.2 42.5 2110 050 032 50x32 30.0 40.0 60.3 42.5* 2EDRMLVLJ 50x40 31.0 38.0 50 + 40 +* 2EDRMLVPL 80x50 38.0 51.0 80 + 50 +* 2EDRMLVQP 100x80 51.0 63.0 100 + 80 +* 2EDRMLVTQ 155x100 63.0 90.0 155 + 100 +* 2EDRMLVVT 200x155 90.0 115.5 200 + 155 +
* Imported fittings from Aliaxis+ Nominal Dimensions
REDUCING BUSHTo solvent weld two pipes or fittings of different diameters.
DOUBLE END SOCKET
CODE NO. NOM. DIMENSIONS SIZE (mm) (mm) L L1 C D D1
2109 020 015 20x15 22.0 22.0 15.0 27.0 21.62109 025 015 25x15 23.0 16.5 14.5 33.8 21.62109 025 020 25x20 26.0 23.0 16.5 33.8 27.02109 032 020 32x20 30.0 22.0 21.0 42.5 27.02109 032 025 32x25 26.0 21.0 19.0 42.5 33.82109 040 025 40x25 33.0 26.0 18.0 48.6 33.82109 040 032 40x32 29.0 24.0 19.0 48.6 42.52109 050 032 50x32 39.0 21.0 25.0 60.7 42.52109 050 040 50x40 35.0 28.0 20.0 60.7 48.62109 080 050 80x50 55.0 41.5 31.5 89.4 60.72109 100 080 100x80 71.0 58.5 25.0 114.8 89.4
REDUCING SOCKETTo solvent weld two pipes of different diameters.
CODE NO. NOM. DIMENSIONS SIZE (mm) (mm) L E D
2108 015 15 24.0 2.0 21.62108 020 20 26.0 2.0 27.02108 025 25 28.0 2.0 33.82108 032 32 35.0 8.0 42.52108 040 40 36.0 8.0 48.62108 050 50 39.0 8.0 60.72108 065 (F) 65 75.0 22.0 75.52108 080 (F) 80 76.5 22.5 89.42108 100 (F) 100 92.0 51.0 114.82108 155 (F) 155 144.0 52.0 168.92108 200 (F) 200 240.0 55.0 219.8
To solvent weld to pipes.
(F) Fabricated from pipe
D
L
E
L
D1
L1
C
L
D
D
L1
D1
L
22 product
PRESSURE PIPING SYSTEM PLAIN END PIPES (Solvent Cement Joint)
FITTINGS
CODE NO. NOM. DIMENSIONS SIZE (mm) (mm) L E T D
2112 015 15 25.0 4.0 19.0 21.62112 020 20 26.0 8.0 19.0 27.02112 025 25 30.0 8.0 23.0 33.82112 032 32 35.0 8.0 25.0 42.52112 040 40 38.0 7.0 26.0 48.62112 050 50 44.0 11.0 29.0 60.7
VALVE SOCKETTo connect stop-valves to uPVC pipe.
FAUCET SOCKET
CODE NO. NOM. DIMENSIONS SIZE (mm) (mm) L T D
2111 015 15 22.0 25.0 21.62111 020 20 23.0 28.0 27.02111 025 25 26.5 29.0 33.82111 032 32 35.0 30.0 42.52111 040 40 42.0 34.0 48.62111 050 50 36.5 32.0 60.7
To connect faucet or ball valves directly to uPVC pipe.
END CAP
CODE NO. NOM. DIMENSIONS SIZE (mm) (mm) L D
2113 015 15 22.0 21.6 2113 020 20 20.0 27.0 2113 025 25 25.0 33.8 2113 032 32 16.5 42.5 2113 040 40 33.0 48.6 2113 050 50 36.0 60.7* 2ECCHHVNN 65 44.0 65 +* 2ECCLLVPP 80 51.0 80 +* 2ECCLLVQQ 100 63.5 100 +
To cap or seal end of uPVC pipe with solvent cement.
* Imported fittings from Aliaxis+ Nominal Dimension
TANK CONNECTOR with Straight Backnut
CODE NO. NOM. DIMENSIONS SIZE (mm) (mm) L T D
2114 015 15 22.0 46.0 21.32114 020 20 23.0 51.0 26.72114 025 25 25.0 60.0 33.5
To connect tank to faucet socket or G.I. socket.
D
L
T
D
L
E
T
D
L
D
L
T
23
FITTINGS
product
PRESSURE PIPING SYSTEM PLAIN END PIPES (Solvent Cement Joint)
45˚ Elbow
CODE NO. NOM. DIMENSIONS SIZE (mm) (mm) L B D
2117 015 15 21.5 7.5 21.6* 2EHHLLVGG 20 19.5 5.5 20 +* 2EHHLLVHH 25 22.5 7.0 25 +* 2EHHLLVVII 32 26.0 10.5 32 +* 2EHHLLVJJ 40 31.0 11.5 40 +* 2EHHLLVLL 50 38.0 14.0 50 +* 2EHHHHVNN 65 44.0 17.0 65 +* 2EHHLVPP 80 51.0 21.0 80 +* 2EHHLLVQQ 100 61.0 26.0 100 +
To solvent weld pipes at both ends.
* Imported fittings from Aliaxis+ Nominal Dimensions
CODE NO. NOM. DIMENSIONS SIZE (mm) (mm) F T D
2118 015 15 11.0 15.8 23.72118 040 40 18.2 25.3 49.2
THREADED PLUGTo cap or seal end of uPVC pipe.
CODE NO. NOM. DIMENSIONS SIZE (mm) (mm) H L Z E R1 D
* 2EBBLLVFF 15 45 16 13 40.5 25 + 15 +* 2EBBLLVGG 20 51 19 13 50.0 32 + 20 +* 2EBBLLVHH 25 57 22 13 57.5 38 + 25 +* 2EBBLLVII 32 67 26 15 71.5 51 + 32 +* 2EBBLLVJJ 40 79 31 17 79.0 57 + 40 +* 2EBBLLVLL 50 98 38 21 98.0 70 + 50 +
* Imported fittings from Aliaxis+ Nominal Dimensions
SOCKET UNIONTo connect faucet or ball valves directly to uPVC pipe.
TAP CONNECTOR
CODE NO. NOM. DIMENSIONS SIZE (mm) (mm) L T D
2115 015 15 67.2 20.0 21.6
To connect to basin faucets or valve socket of pipeline for easy maintenance and repair.
Also available in other configurationi.e. Tap Connector Elbow
24 product
PRESSURE PIPING SYSTEM PLAIN END PIPES (Solvent Cement Joint)
FITTINGS
Pressure Pipe & Fittings System
Typical Layout
ASTM uPVC Schedule 80
27
SPECIFICATION
specification
PRESSURE PIPING SYSTEMSCHEDULE 80 & IPEX FITTINGS
Schedule 80 Pipes
Temperature Consideration
Standards & Quality
Applications
chemical processing treated and untreated effluent
agricultural cooling water
potable water irrigation
Sch. 80 pipe is resistant to most acids, alkalis, salts, fats, oxidants and halogens. However, Sch. 80 pipe should not be
used with ester, ketones, ethers and aromatic or chlorinated hydrocarbons.
Typical applications include:
Being a thermoplastic material, Sch. 80 pipe will display variations in its physical properties as the temperature
changes. As the temperature falls, the pipe's stiffness and tensile strength increase, thereby increasing the pipe's
pressure capacity. Conversely, as the operating temperature rises, the pipe decreases in stiffness and tensile strength;
consequently, the pressure capacity of the pipe will be reduced. With the drop in temperature, Sch. 80 pipe decreases
in impact strength and becomes less ductile. As the temperature rises, the impact strength and flexibility of the pipe
increase.
Thermal Linear Expansion
Sch. 80 pipe expands and contracts with change in
temperature. The coefficient of thermal expansion is 7 X 10-5
mm/mm/ºC. This is equivalent to 7mm change in length for
every 10 meters for every 10ºC change in temperature.
Pressure De-rating Factor
The pressure ratings given are for operating temperature of
water at 73ºF (23ºC). For operating temperature above 73ºF
(23ºC), the working pressure has to be de-rated by
multiplying the working pressure of the selected pipe at 73ºF
(23ºC), by the appropriate de-rating factor to determine the
maximum permissible working pressure of the pipes at the
elevated temperature chosen. Nevertheless, Sch. 80 pipe
should not be used at temperature in excess of 140ºF
(60ºC).
OPERATING TEMP DE-RATING FACTOR Fº Cº 73 23 1.00 80 26 0.88 90 32 0.76 100 38 0.64 110 43 0.54 120 49 0.42 130 54 0.32 140 60 0.20
Sch. 80 pipe is manufactured to comply with NSF
Standard 61, CSA B 137.3 and ASTM D1785,
consistently meeting the Quality Assurance test
requirements of the standard with regards to burst
pressure, flattening and extrusion quality.
28product
PRESSURE PIPING SYSTEMSCHEDULE 80 & IPEX FITTINGS
PIPES
Chemical resistance:
Sch. 80 pipes have excellent chemical resistance which allows the
transportation of many acids, alkalis and chemical concentrates
without fear of corrosion and environmental pollution.
Abrasion resistance:
Sch. 80 pipes offer good resistance to abrasion and erosion from
aggressive slurries, which can rapidly damage steel or other
traditional pipe materials.
Smooth bore:
The exceptionally smooth bore results in low friction head losses and
also inhibits the formation of scale, with consequent savings in pump
energy consumption and reduced pressure drops.
Light weight:
At 5 times lighter than steel pipe, Sch. 80 pipes are much easier to
handle, especially during installation at site.
Easy to join:
Solvent welding gives fast and trouble free installation and allows
simple modifications to existing systems.
PRODUCT NOMINAL PIPE OUTSIDE WALL MAX WORKING CODE DIAMETER LENGTH DIAMETER THICKNESS PRESS
(in) (mm) L (M) (in) (mm) (in) (mm) (psi) (MPa)
SCH. 80 Pipes Benefits
1100 015 60 80 ½ 15 6.0 0.836 - 0.844 21.2 - 21.4 0.147 - 0.167 3.7 - 4.2 850 5.861100 020 60 80 ¾ 20 6.0 1.046 - 1.054 26.6 - 26.8 0.154 - 0.17 3.9 - 4.4 690 4.761100 025 60 80 1 25 6.0 1.310 - 1.320 33.3 - 33.5 0.179 - 0.200 4.6 - 5.1 630 4.341100 032 60 80 1¼ 32 6.0 1.655 - 1.665 42.0 - 42.3 0.191 - 0.214 4.9 - 5.4 520 3.591100 040 60 80 1½ 40 6.0 1.894 - 1.906 48.1 - 48.4 0.200 - 0.224 5.1 - 5.7 470 3.241100 050 60 80 2 50 6.0 2.369 - 2.381 60.2 - 60.5 0.218 - 0.244 5.5 - 6.2 400 2.761100 065 60 80 2½ 65 6.0 2.868 - 2.882 72.8 - 73.2 0.276 - 0.309 7.0 - 7.8 420 2.901100 080 60 80 3 80 6.0 3.492 - 3.508 88.7 - 89.1 0.300 - 0.336 7.6 - 8.5 370 2.551100 100 60 80 4 100 6.0 4.491 - 4.509 114.1 - 114.5 0.337 - 0.377 8.6 - 9.6 320 2.211100 155 60 80 6 155 6.0 6.614 - 6.636 168.0 - 168.6 0.432 - 0.484 11.0 - 12.3 280 1.931100 200 60 80 8 200 6.0 8.610 - 8.640 218.7 - 219.5 0.500 - 0.560 12.7 - 14.2 250 1.721100 250 60 80 10 250 6.0 10.735 - 10.765 272.7 - 273.4 0.593 - 0.664 15.1 - 16.9 230 1.591100 300 60 80 12 300 6.0 12.735 - 12.765 323.5 - 324.2 0.687 - 0.769 17.5 - 19.5 230 1.59
Pipes Dimensions & Working Pressures
Schedule 80 Pipes (Plain Ended)
29
SPECIFICATION
specification
PRESSURE PIPING SYSTEMSCHEDULE 80 & IPEX FITTINGS
Manufacturer’s Product Specification: Schedule 80 Fittings
Scope This specification sheet covers the manufacturer’s requirements for Xirtec® 140 PVC Schedule 80 pipe fittings as
manufactured by IPEX. These fittings meet or exceed the standards set by the American Society for Testing and Materials
(ASTM) and the National Sanitation Foundation (NSF) International, Standards 14/61.
PVC Materials Rigid Xirtec® 140 PVC (Polyvinyl Chloride) used in the manufacture of Schedule 80 fittings is of Type I, Grade 1 compound
(cell classification 12454) as stated in ASTM D1784. Raw material used in molding shall contain the specified amounts of
color pigment, stabilizers, and other additives approved by NSF International.
Dimensions Physical dimensions and tolerances of Xirtec® 140 PVC Schedule 80 IPS fittings as manufactured by IPEX meet the
requirements of ASTM Standard Specification D2467 for socket-type fittings and ASTM D2464 for threaded fittings.
Threaded fittings have Taper Pipe Threads in accordance with ANSI/ASME B1.20.1. Flanged fittings have nominal
dimensions in accordance with ANSI/ASME B16.5.
Marking Xirtec® 140 PVC Schedule 80 fittings are marked as prescribed in ASTM D2467 and D2464 to indicate the manufacturer’s
name and trademark, material designation,the NSF mark, size of fitting, and ASTM designation D2467 (socket) or D2464
(threaded).
Sample Specification All Schedule 80 socket fittings shall conform to ASTM D2467. All Schedule 80 threaded fittings shall conform to ASTM
D2464. All 150 Class flanges shall conform to ANSI/ASME B16.5. All pipe, fittings, and valves shall be compatible Xirtec®
140 compound and produced by one manufacturer; as supplied by IPEX.
Notes All dimensions are in inches unless otherwise specified. Dimensions are subject to change without notice. Contact the
factory for clarifications.
product
PRESSURE PIPING SYSTEMSCHEDULE 80 & IPEX FITTINGS
FITTINGS
Schedule 80COUPLINGS
Soc x Soc
Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. C D L M
1/4 x 1/43/8 x 3/81/2 x 1/23/4 x 3/4
1 x 11-1/4 x 1-1/41-1/2 x 1-1/2
2 x 22-1/2 x 2-1/2
3 x 34 x 46 x 68 x 8
COUPLINGS
M
LD
C
C
829002 036088 0.655 0.302 1.375 0.845829003 036089 0.750 0.423 1.625 1.000829005 036090 0.900 0.526 1.920 1.240829007 036091 1.035 0.722 2.170 1.505829010 036092 1.145 0.936 2.395 1.770829012 036093 1.280 1.255 2.670 2.140829015 036094 1.400 1.476 2.915 2.410829020 036095 1.535 1.913 3.170 2.900829025 036096 1.780 2.290 3.755 3.570829030 036097 1.900 2.864 4.025 4.195829040 036098 2.275 3.786 4.765 5.285829060 036099 3.020 5.709 6.310 7.645829080 036100 4.540 7.565 9.625 9.870
Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. C1 C2 D1 D2 L M1 M2
1/2 x 1/43/4 x 1/21 x 1/21 x 3/4
1-1/4 x 3/41-1/2 x 12 x 1-1/2
REDUCING COUPLINGS
830072830101830130830131830167830211830251
036746036748036749036750036751036754035758
0.8751.0001.1251.1251.2501.3751.500
0.6250.8750.9851.0001.5251.1251.375
0.5260.7220.9360.9361.2551.4761.913
0.3020.5260.5260.7220.7220.9361.476
2.2802.3452.7402.7403.0403.1553.405
1.2401.5051.7701.7702.1402.4102.900
0.8451.2401.2401.5051.5051.7702.410
M1
C1
L
C2
D1
D2
M2
Schedule 80COUPLINGS
FPT x FPT - reducing
30
Imported fittings from Aliaxis.
Imported fittings from Aliaxis.
FITTINGS
product 31
PRESSURE PIPING SYSTEMSCHEDULE 80 & IPEX FITTINGS
Schedule 80COUPLINGS
FPT x FPT
Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. T D L M
¼ x ¼3⁄8 x 3⁄8½ x ½¾ x ¾1 x 1
1-¼ x 1-¼1-½ x 1-½
2 x 22-½ x 2-½
3 x 34 x 4
COUPLINGS
830002 036104 0.595 0.302 1.345 0.845830003 036105 0.595 0.423 1.470 1.000830005 036106 0.755 0.526 1.605 1.240830007 036107 0.755 0.722 1.620 1.505830010 036108 0.940 0.936 2.010 1.770830012 036109 1.055 1.255 2.210 2.140830015 036110 1.065 1.476 2.225 2.410830020 036111 1.200 1.913 2.500 2.900830025 036112 1.460 2.290 3.125 3.570830030 036113 1.530 2.864 3.190 4.195830040 036114 1.585 3.786 3.405 5.285
Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. C1 C2 D1 D2 L M1 M2
3/4 x 1/21 x ½1 x ¾
1-¼ x ¾1-¼ x 11-½ x ½1-½ x ¾1-½ x 1
1-½ x 1-¼2 x ½2 x 1
2 x 1-½3 x 24 x 24 x 36 x 48 x 6
REDUCING COUPLINGS
829101 036719 1.040 0.885 0.722 0.526 2.080 1.505 1.240829130 036720 1.165 0.880 0.936 0.526 2.380 1.770 1.240829131 036721 1.165 1.035 0.936 0.722 2.385 1.770 1.505829167 036723 1.280 1.000 1.255 0.722 2.590 2.140 1.505829168 036724 1.280 1.155 1.255 0.936 2.660 2.140 1.770829209 036725 1.375 0.875 1.476 0.526 2.845 2.140 1.240829210 036726 1.375 1.000 1.476 0.722 2.845 2.140 1.505829211 036727 1.410 1.160 1.476 0.936 3.060 2.140 1.770829212 036728 1.410 1.280 1.476 1.255 3.050 2.140 2.140829247 036897 1.500 0.885 1.913 0.526 2.480 2.900 1.240829249 036729 1.545 1.160 1.913 0.936 3.530 2.900 1.770829251 036731 1.540 1.410 1.913 1.476 3.515 2.900 2.410829338 036735 1.910 1.535 2.864 1.913 4.200 4.195 2.900829420 036736 2.290 1.540 3.786 1.913 5.110 5.285 2.900829422 036738 2.290 1.905 3.786 2.864 5.105 5.285 4.195829532 036740 3.030 2.290 5.709 3.786 6.740 7.645 5.285829585 036743 4.040 3.000 7.565 5.709 8.040 9.870 7.645
Schedule 80COUPLINGS
Soc x Soc - reducing
T
T
D
M
L
M1
L
M2
D1
D2
C1
C2
Imported fittings from Aliaxis.
Imported fittings from Aliaxis.
product 32
PRESSURE PIPING SYSTEMSCHEDULE 80 & IPEX FITTINGS
FITTINGS
Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. C CM D1 D2 L Q
3⁄8 x ¼½ x ¼½ x 3⁄8¾ x ½1 x ½1 x ¾
1-¼ x ½1-¼ x ¾1-¼ x 11-½ x ½1-½ x ¾1-½ x 1
1-½ x 1-¼2 x ½2 x ¾2 x 1
2 x 1-¼2 x 1-½
2-½ x 1-¼2 ½ x 1-½
2-½ x 23 x 1
3 x 1-¼3 x 1-½
3 x 23 x 2-½
4 x 24 x 2-½
4 x 36 x 26 x 36 x 48 x 48 x 6
REDUCING BUSHINGS
837052 036599 0.750 0.770 0.675 0.302 0.975 0.800837072 036600 0.875 0.890 0.840 0.302 1.090 0.970837073 036601 0.875 0.880 0.840 0.423 1.115 1.005837101 036604 1.000 1.020 1.050 0.526 1.380 1.250837130 036605 1.125 1.125 1.315 0.526 1.500 1.635837131 036606 1.125 1.305 1.315 0.722 1.505 1.635837166 036607 1.250 1.260 1.660 0.526 1.635 2.080837167 036608 1.250 1.255 1.660 0.722 1.625 2.075837168 036609 1.250 1.305 1.660 0.936 1.685 2.065837209 036610 1.375 1.380 1.900 0.526 1.755 2.260837210 036611 1.375 1.380 1.900 0.722 1.750 2.260837211 036612 1.375 1.380 1.900 0.936 1.755 2.260837212 036613 1.295 1.385 1.900 1.255 1.760 2.265837247 036614 1.500 1.505 2.375 0.526 1.875 2.815837248 036615 1.500 1.505 2.375 0.722 1.865 2.820837249 036616 1.500 1.520 2.375 0.936 1.875 2.825 837250 036617 1.500 1.520 2.375 1.255 1.895 2.840 837251 036618 1.500 1.445 2.375 1.476 1.885 2.820837290 036620 1.350 2.000 2.875 1.255 2.300 3.280837291 036621 1.560 2.000 2.875 1.476 2.300 3.290837292 036622 1.750 1.885 2.875 1.913 2.120 3.270837335 036623 1.875 1.900 3.500 0.936 2.265 3.905837336 036269 1.875 1.870 3.500 1.255 2.265 3.735837337 036624 1.875 1.870 3.500 1.476 2.250 3.890837338 036625 1.875 1.870 3.500 1.913 2.250 3.890837339 036626 1.875 1.885 3.500 2.290 2.260 3.900837420 036628 2.250 2.280 4.500 1.913 2.660 4.910837421 036629 2.250 2.270 4.500 2.290 2.655 4.890837422 036630 2.250 2.270 4.500 2.864 2.665 4.920837528 036632 3.000 3.470 6.625 1.913 3.990 6.850837530 036633 3.000 3.100 6.625 2.864 3.720 7.335837532 036634 3.000 3.105 6.625 3.786 3.720 7.330837582 136155 4.000 4.055 8.625 3.786 5.120 9.435837585 036638 4.000 4.085 8.625 5.709 4.465 9.360
Schedule 80REDUCING BUSHINGS
Spig x Soc
Q
C
D2
D1
CML
Imported fittings from Aliaxis.
product
PRESSURE PIPING SYSTEMSCHEDULE 80 & IPEX FITTINGS
FITTINGS
33
REDUCING BUSHINGS Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. D1 D2 L Q S T
3⁄8 x ¼½ x ¼½ x 3⁄8¾ x ¼¾ x 3⁄8¾ x ½1 x ¼1 x 3⁄81 x ½1 x ¾
1-¼ x ½1-¼ x ¾1-¼ x 11-½ x ½1-½ x ¾1-½ x 1
1-½ x 1-¼2 x ½2 x ¾2 x 1
2 x 1-¼2 x 1-½2-½ x 23 x 1-½
3 x 23 x 2-½
4 x 24 x 3
Schedule 80REDUCING BUSHINGS
MPT x FPT
839052 036647 0.423 0.302 0.810 0.805 0.600 0.625839072 036648 0.526 0.302 0.875 0.875 0.680 0.570839073 036649 0.526 0.423 0.940 1.000 0.745 0.580839098 036651 0.722 0.302 1.010 1.185 0.785 0.675839099 036652 0.722 0.423 1.005 1.200 0.785 0.600839101 036653 0.722 0.526 0.995 1.380 0.685 0.760839128 036654 0.936 0.302 1.230 1.500 0.960 0.630839129 036655 0.936 0.423 1.225 1.500 0.980 0.625839130 036656 0.936 0.526 1.130 1.685 0.815 0.765839131 036657 0.936 0.722 1.160 1.690 0.820 0.775839166 036658 1.255 0.526 1.370 2.070 0.990 0.695839167 036659 1.255 0.722 1.390 2.075 1.010 0.805839168 036660 1.255 0.936 1.395 2.070 1.015 1.020839209 036661 1.476 0.526 1.215 2.100 0.900 0.835839210 036662 1.476 0.722 1.375 2.315 0.985 0.805839211 036663 1.476 0.936 1.380 2.315 0.990 0.995839212 036664 1.476 1.255 1.380 2.315 1.010 1.015839247 036665 1.913 0.526 1.405 2.820 1.035 0.690839248 036666 1.913 0.722 1.385 2.760 1.005 0.810839249 036667 1.913 0.936 1.385 2.770 0.995 0.995839250 036668 1.913 1.255 1.410 2.815 1.035 0.860839251 036669 1.913 1.476 1.380 2.760 1.010 1.010839292 036672 2.290 1.913 1.970 3.125 1.555 1.065839337 036673 2.864 1.476 1.995 3.740 1.625 1.040839338 036674 2.864 1.913 2.030 3.755 1.625 1.065839339 036675 2.864 2.290 2.020 3.740 1.630 1.560839420 036676 3.786 1.913 1.940 4.730 1.550 1.000 839422 036677 3.786 2.864 2.125 4.755 1.730 1.625
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEMSCHEDULE 80 & IPEX FITTINGS
FITTINGS
34
REDUCING BUSHINGS Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. CM D1 D2 L Q T
3⁄8 x ¼½ x ¼½ x 3⁄8¾ x ¼¾ x ½1 x 3⁄81 x ½1 x ¾
1-¼ x ½1-¼ x ¾1-¼ x 11-½ x ½1-½ x ¾1-½ x 1
1-½ x 1-¼2 x ½2 x ¾2 x 1
2 x 1-¼2 x 1-½2-½ x ½2-½ x ¾2-½ x 1
2-½ x 1-¼2-½ x 1-½
2-½ x 23 x ¾
Schedule 80REDUCING BUSHINGS
Spig x FPT
838052838072838073838098838101838129838130838131838166838167838168838209838210838211838212838247838248838249838250838251838287838288838289838290838291838292838334
036679036681036682036683036684036685036686036687036688036689036690036691036692036693036694036695036696036697036698036699236002036700036701036702036703036704036705
0.7500.8200.8101.0001.0251.1601.1801.2001.3051.2551.3051.3751.4301.4151.3751.5051.5351.5401.5351.5351.9901.9901.9901.9901.9771.7501.880
0.6750.8400.8401.0501.0501.3151.3151.3151.6601.6601.6601.9001.9001.9001.9002.3752.3752.3752.3752.3752.8752.8752.8752.8752.8752.8753.500
0.3020.3020.4230.3020.5260.4230.5260.7220.5260.7220.9360.5260.7220.9361.2550.5260.7220.9361.2551.4760.5260.7220.9361.2551.4761.9130.722
0.9601.0151.0101.2301.3451.4101.5001.5001.6801.6451.6851.7551.8151.8051.7761.8801.9251.9151.9201.9202.3802.3802.3802.3802.4001.9552.270
0.7950.8800.8901.2001.3751.5001.6851.6852.0652.0752.0652.2602.3252.3202.2602.8102.7602.7552.7552.7553.1103.1103.1103.1103.1103.1903.740
0.6000.5700.5950.7050.7750.5900.7650.7750.8050.6900.8100.6850.8101.0100.9000.6850.8050.9950.9950.9950.7600.8401.0301.0451.0451.0000.720
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEMSCHEDULE 80 & IPEX FITTINGS
FITTINGS
REDUCING BUSHINGS Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. C M D1 D2 Q T
3 x 13 x 1-¼3 x 1-½
3 x 23 x 2-½
4 x 24 x 2-½
4 x 36 x 26 x 36 x 4
838335838336838337838338838339838420838421838422838528838530838532
036706036707036708036709036710036711036712036713036714036715036716
1.9801.9651.9951.8701.7502.2802.2602.3303.4853.4703.500
3.5003.5003.5003.5003.5004.5004.5004.5006.6256.6256.625
0.9361.2551.4761.9132.2901.9132.2902.8641.9132.8643.786
2.3752.3502.3902.2602.0952.6552.6402.6554.0004.0004.000
3.7403.9703.7203.7203.8454.9004.7304.8956.8456.8706.860
1.0451.0401.0601.0601.4401.7101.5602.0501.0851.6701.760
90º ELBOWS Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. C D H M
¼ x ¼3⁄8 x 3⁄8½ x ½¾ x ¾1 x 1
1-¼ x 1-¼1-½ x 1-½
2 x 22-½x 2-½
3 x 34 x 46 x 68 x 8
10 x 1012 x 12
806002806003806005806007806010809012806015806020806025806030806040806060806080806100806120
036179036180036181036182036183036184036185036186036187036188036189036191036192036864036865
0.6550.7800.8901.0201.1451.2701.4001.5251.7751.9352.2653.0254.1255.5006.500
0.3020.4230.5240.7220.9361.2551.4761.9132.2902.8643.7865.7097.5659.493
11.294
1.0001.2501.4451.6851.9402.1602.4002.8053.3003.7454.6256.6508.600
11.31513.385
0.8451.0001.2151.4701.7602.1452.3852.9553.5804.2305.3457.6159.775
10.78014.200
Schedule 80REDUCING BUSHINGS
Spig x FPT Cont.
Schedule 8090º ELBOWS
Soc x Soc
90º ELBOWS Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. C D G1 G2 M T
½ x ½¾ x ¾1 x 1
1-¼ x 1-¼1-½x 1-½
2 x 2
807005807007807010807012807015807020
036172036173036174036175036176036177
0.8951.0151.1551.2751.3751.530
0.5260.7220.9361.2551.4761.913
0.5400.6100.7850.9751.0401.375
0.5350.5900.7850.9751.0351.470
1.2001.5051.7602.1452.3852.955
0.9051.0351.1501.2751.4000.970
Schedule 8090º ELBOWS
Soc x FPT
35
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEMSCHEDULE 80 & IPEX FITTINGS
FITTINGS
90º ELBOWS Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. D H M T
¼ x ¼3⁄8 x 3⁄8½ x ½¾ x ¾1 x 1
1-¼ x 1-¼1-½ x 1-½
2 x 22-½ x 2-½
3 x 34 x 4
808002808003808005808007808010808012808015808020808025808030808040
036197036198036199036200036201036202036203036204036205036206036207
0.3020.4230.5260.7220.9361.2551.4761.9132.2902.8643.786
0.9401.0001.3701.6151.8101.7952.0402.3702.9353.1603.735
0.8451.0001.2151.4701.7602.1452.3852.9553.5804.2305.345
0.6250.6250.7400.8251.1300.9300.9301.0951.7751.4201.495
Schedule 8090º ELBOWS
FPT x FPT
Note: T=the inside thread depth (bell depth)
45º ELBOWS Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. C D H M
¼ x ¼3⁄8 x 3⁄8½ x ½¾ x ¾1 x 1
1-¼ x 1-¼1-½ x 1-½
2 x 22-½ x 2-½
3 x 34 x 46 x 68 x 8
10 x 1012 x 12
817002817003817005817007817010817012817015817020817025817030817040817060817080817100817020
036142036143036144036145036146036147036148036149036150036151036152036154036155036862036863
0.6550.7500.8901.0201.1501.2651.3851.5051.7601.8852.2603.0304.0405.5006.500
0.3020.4230.5260.7220.9361.2551.4761.9132.2902.8643.7865.7097.5659.493
11.294
0.8150.9701.2001.3501.4751.6601.7902.0002.4802.7003.0954.5756.2508.0659.580
0.8451.0001.2151.4701.7602.1452.3852.9553.5804.2305.3457.6159.775
10.78014.200
Schedule 8045º ELBOWS
Soc x Soc
45º ELBOWS Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. D K M T
¼ x ¼3⁄8 x 3⁄8½ x ½¾ x ¾1 x 1
1-¼ x 1-¼1-½ x 1-½
2 x 22-½ x 2-½
3 x 34 x 4
819002819003819005819007819010819012819015819020819025819030819040
036160036161036162036163036164036165036166036167036168036169036170
0.3020.4230.5260.7220.9361.2551.4761.9132.2902.8643.786
0.7800.8150.9951.1951.3801.6201.8102.0602.6652.9903.495
0.8451.0001.2151.4701.7602.1452.3852.9553.5804.2305.345
0.5950.8150.6750.6750.8450.8950.8950.9151.4551.5401.600
Schedule 8045º ELBOWS
FPT x FPTNote: T=the inside thread depth (bell depth)
36
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEMSCHEDULE 80 & IPEX FITTINGS
FITTINGS
Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. C D H1 H2 M T
½ x ½ x ½¾ x ¾ x ¾1 x 1 x 12 x 2 x 2
802005802007802010802020
036828036829036830036832
0.9051.0301.1501.500
0.5260.7220.9361.913
1.3751.6151.8152.405
1.3751.6151.8152.405
1.2401.4151.7502.895
0.9051.0301.1500.970
22.5º ELBOWS Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. D H J M
2 x 23 x 34 x 4
816020816030816040
036134036135036136
1.9132.8643.786
1.8752.4052.875
0.4400.5650.625
2.9554.2305.345
Schedule 8022.5º ELBOWS
Soc x Soc
TEES Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. C D H M
¼ x ¼ x ¼3⁄8 x 3⁄8 x 3⁄8½ x ½ x ½¾ x ¾ x ¾1 x 1 x 1
1-¼ x 1-¼ x 1-¼1-½ x 1-½ x 1-½
2 x 2 x 22-½ x 2-½ x 2-½
3 x 3 x 34 x 4 x 46 x 6 x 68 x 8 x 8
10 x 10 x 1012 x 12 x 12
801002 036768 0.655 0.302 0.970 0.845801003 036769 0.780 0.423 1.250 0.985 801005 036770 0.895 0.526 1.405 1.240801007 036771 1.015 0.722 1.595 1.415801010 036772 1.145 0.936 1.845 1.750 801012 036773 1.270 1.255 2.155 2.350 801015 036774 1.395 1.476 2.410 2.405 801020 036775 1.520 1.913 2.800 2.895 801025 036776 1.775 2.290 3.280 3.570 801030 036777 1.900 2.864 3.720 4.200801040 036778 2.270 3.786 4.595 5.280801060 036780 3.030 5.709 6.530 7.575801080 036781 4.130 7.565 8.625 9.810 801100 036866 5.500 9.493 11.250 12.000801120 036876 6.500 11.294 13.385 14.200
Schedule 80TEE
Soc x Soc x Soc
TEES
Schedule 80TEE
Soc x Soc x FPT
TEES Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. D H M T
¼ x ¼ x ¼3⁄8 x 3⁄8 x 3⁄8½ x ½ x ½¾ x ¾ x ¾1 x 1 x 1
1-¼ x 1-¼ x 1-¼1-½ x 1-½ x 1-½
2 x 2 x 22-½ x 2-½ x 2-½
3 x 3 x 34 x 4 x 4
805002 036817 0.302 0.970 0.845 0.655 805003 036818 0.423 1.030 0.985 0.625 805005 036819 0.526 1.135 1.240 0.905 805007 036820 0.722 1.605 1.415 1.020 805010 036821 0.936 1.815 1.750 1.170 805012 036822 1.255 1.885 2.350 1.000 805015 036823 1.476 2.055 2.405 0.985 805020 036824 1.913 2.370 2.895 1.040805025 036825 2.290 2.965 3.570 1.450805030 036826 2.864 3.180 3.200 1.425 805040 036827 3.786 3.720 5.280 1.515
Schedule 80TEE
FPT x FPT x FPT
37
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEMSCHEDULE 80 & IPEX FITTINGS
FITTINGS
Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. C1 C2 C3 D1 D2 D3 H1 H2 H3 M1 M2 M3
801101801102
-801126801130801131801157801167801168801210801211801247801248801249801251801338801339801420801422801530801532801585
036786036787036790036791036788036789036792036793036794036795036796036797036798036799036800036802036803036804036805036807036808036810
1.0301.1301.3001.3001.1251.3151.2501.4601.2801.6001.2501.4051.5001.5001.5301.5301.9902.2602.2602.9753.0254.120
1.0301.1301.1151.3001.1251.3151.2501.4601.2501.6001.2501.4051.5001.5001.5301.5301.5302.2602.2602.9753.0254.120
0.8901.3001.3001.1300.8751.0251.0001.1500.8751.1501.1251.1450.8751.0001.1401.3801.5251.5251.9101.8752.2753.060
0.7220.7220.9360.9360.9360.9361.2551.2551.2551.4761.4761.9131.9131.9131.9132.8642.8643.7863.7865.7095.7097.565
0.7220.7220.7220.7220.9360.9360.9361.2551.2551.4761.4761.9131.9131.9131.9132.8642.8643.7863.7865.7095.7097.565
0.5260.9360.7220.9360.5260.7220.7220.7220.9360.7220.9360.5260.7220.9361.4761.9132.2901.9132.8642.8643.7865.709
REDUCING TEES
¾ x ¾ x ½¾ x ¾ x 11 x ¾ x ¾1 x ¾ x 11 x 1 x ½1 x 1 x ¾
1-¼ x 1 x ¾1-¼ x 1-¼ x ¾1-¼ x 1-¼ x 11-½ x 1-½ x ¾1-½ x 1-½ x 1
2 x 2 x ½2 x 2 x ½2 x 2 x 1
2 x 2 x 1-½3 x 3 x 2
3 x 3 x 2-½4 x 4 x 24 x 4 x 36 x 6 x 36 x 6 x 48 x 8 x 6
1.6651.6651.8801.8801.7201.9301.9402.2102.1552.2502.1902.3052.0952.1902.4002.7403.4504.4604.3505.8055.8257.720
1.6651.6651.7801.8801.7201.9301.8752.2102.1252.2502.1252.3052.0952.1902.4002.7403.4504.4604.3505.8055.8257.720
1.4651.9301.7801.7801.7501.7352.0652.0202.4402.2102.1552.1602.3152.4402.4302.6603.3104.0854.2205.6305.7507.625
1.4151.4151.7501.7501.7501.7502.3502.3502.3502.4052.4052.8952.8952.8952.8954.2004.2005.2805.2807.5757.5759.810
1.4151.4151.4151.4151.7501.7501.7502.3502.3502.4052.4052.8952.8952.8952.8954.2004.2005.2805.2807.5757.5759.810
1.2401.7501.4151.7501.2401.4151.4151.7501.7501.4151.7501.2401.4151.7502.4052.8953.5702.8954.2004.2005.2807.575
Imported fi ttings from Aliaxis.
Schedule 80TEE
Soc x Soc x Soc - reducing
Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. D G1 G2 G3 H1 H2 H3 M
WYE
1-½ x 1-½ x 1-½2 x 2 x 2 3 x 3 x 34 x 4 x 46 x 6 x 68 x 8 x 8
875015875020875030875040875060875080
036854036855036856036857036858036859
1.4761.9132.8643.7865.7097.565
0.6900.8451.0701.3201.8757.220
2.3753.0304.4405.6758.305
15.280
2.4053.0303.5854.6006.745
15.530
2.0652.3452.9453.5704.875
11.470
3.7504.5306.3157.925
11.30019.530
3.7504.5305.4506.8509.740
19.530
2.3452.8754.1155.1907.5109.690
Schedule 8045º WYE
Soc x Soc x Soc
38
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEMSCHEDULE 80 & IPEX FITTINGS
FITTINGS
Schedule 8045º WYE
Soc x Soc x Soc - Reducing
Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. D1 D2 D3 G1 G2 G3 H1 H2 L M1 M2 M3
REDUCING WYE
875532 036861 5.709 5.709 3.786 2.560 8.000 7.125 6 x 6 x 4 10.250 10.125 12.690 7.605 7.605 5.400
CROSSES Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. D H J M
½ x ½ x ½ x ½¾ x ¾ x ¾ x ¾1 x 1 x 1 x 1
1-¼ x 1-¼ x 1-¼ x 1-¼1-½ x 1-½ x 1-½ x 1-½
2 x 2 x 2 x 22-½ x 2-½ x 2-½ x 2-½
3 x 3 x 3 x 34 x 4 x 4 x 4
820005820007820010820012820015820020820025820030820040
036116036117036118036119036120036121036122036123036124
0.5260.7220.9361.2551.4761.9132.2902.8643.786
0.5650.6100.9551.0951.2351.5301.7502.0952.625
1.4701.6402.1102.3752.6403.0003.4403.9704.875
1.5101.7102.1102.4402.5753.0403.3504.1105.250
Schedule 80CROSSES
Soc x Soc X Soc x Soc
39
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEMSCHEDULE 80 & IPEX FITTINGS
FITTINGS
FLANGES Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. BHC BHD BHN C D L M R S
½¾1
1-¼1-½
22-½
34568
851005851007851010851012851015851020851025851030851040851050851060851080
036223036224036225036226036227036228036229036230036231036232036233036234
2.3752.7503.1253.5003.8754.7505.5006.0007.5008.5009.560
11.705
0.6300.6300.6300.6200.6250.7450.7450.7000.7458.8800.9650.880
4.0004.0004.0004.0004.0004.0004.0004.0008.0008.0008.0008.000
0.9151.0151.1351.2551.3851.5251.7501.9202.2403.0303.1204.000
Schedule 80FLANGE
One Piece Soc
0.5260.7220.9361.2551.4761.9132.2902.8643.7864.7685.7097.565
1.0901.2251.3451.4651.5851.7551.9602.1252.4753.2503.5004.575
3.5003.8804.2504.6205.0006.0007.0007.5009.000
10.17511.00013.580
0.4700.5250.5850.6500.7300.8200.9001.0701.1151.0401.3501.500
0.0000.0500.0500.0500.0500.0650.0650.0800.0400.0400.0400.045
FLANGES Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. BHC BHD BHN D L M R T
½¾1
1-¼1-½
22-½
346
Schedule 80FLANGE
One Piece FPT
852005852007852010852012852015852020852025852030852040852060
036240036241036242036243036244036245036246036247036248036249
2.3752.7503.1253.5003.8754.7505.5006.0007.5009.500
0.6400.6400.6400.6250.6250.7500.7500.7550.7550.880
4.0004.0004.0004.0004.0004.0004.0004.0008.0008.000
0.5260.7220.9361.2541.4761.9132.2902.8643.7865.709
1.0101.0101.1751.2151.1901.2501.5851.7001.8003.500
3.5003.8804.2504.6205.0006.0007.0007.5009.000
11.000
0.4700.5250.5900.6550.7350.8100.9000.9001.0951.270
0.8050.8100.9751.0100.9901.0351.3551.4601.5603.050
Note: BHN = Bolt Hole Numbers
Note: BHN = Bolt Hole Numbers
40
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEMSCHEDULE 80 & IPEX FITTINGS
FITTINGS
FLANGES Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. BHC BHD BHN C D L M R
1½2346810121416
Schedule 80FLANGE
Van Stone Heavy Duty Socwith Fibre Loc Ring
854015HD854020HD854030HD854040HD854060HD854080HD854100HD854120HD854140HD854160HD
036323036324036326036416036417036418036419036429036358036359
3.8704.7406.0007.5009.500
11.75014.25016.87518.75021.250
0.6200.7450.7000.7600.9000.8951.0300.9801.0852.215
4.0004.0004.0008.0008.0008.000
12.00012.00012.00016.000
1.4101.5251.8902.2953.0254.0155.2506.3756.7508.000
1.4761.9132.8643.7865.7097.5659.493
11.29412.41214.224
1.8102.0102.0552.5353.2004.3255.5606.7107.5108.375
5.0006.0007.5009.000
11.00013.50016.00019.00021.00024.000
0.9951.1350.8951.0901.2201.5001.8101.9402.7502.750
FLANGES Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. BHC BHD BHN C D L M R
½¾1
1-¼1-½
22-½
34568
1012
854005854007854010854012854015854020854025854030854040854050854060854080854100854120
036344036345035346036347036348036349036350036351036352035353036354036355036356036357
2.3802.7503.1203.5003.8704.7405.5006.0007.5008.5009.500
11.75014.25016.875
0.6200.6200.6200.6200.6200.7450.7500.7000.7600.8800.9000.8951.0300.980
4.0004.0004.0004.0004.0004.0004.0004.0008.0008.0008.0008.000
12.00012.000
0.8701.0001.1251.2501.4101.5251.7601.8902.2952.6503.0254.0155.2506.375
0.5260.7220.9361.2551.4761.9132.2902.8643.7864.7685.7097.5659.493
11.294
1.0401.1351.2601.3901.8102.0102.0052.0552.5352.9803.2004.3255.5606.710
3.5053.8804.2404.6105.0006.0006.9657.5009.0009.100
11.00013.50016.00019.000
0.5000.5600.6450.6500.9931.1350.9600.8951.0901.1401.2201.5001.8101.940
Note: BHN = Bolt Hole Numbers
Note: BHN = Bolt Hole Numbers
Schedule 80FLANGE
Van Stone Soc withPVC Ring
41
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEMSCHEDULE 80 & IPEX FITTINGS
FITTINGS
FLANGES Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. BHC BHD BHN L M R
½¾1
1-¼1-½
22-½
3468
853005853007853010853012853015853020853025853030853040853060853080
036250036251036252036253036254036255036256036257036258036259036260
2.3802.7653.1253.5053.8954.7655.5006.0157.5159.505
11.755
0.6300.6400.6450.6300.6250.7500.7400.7850.7850.9150.910
4.0004.0004.0004.0004.0004.0004.0004.0004.0004.0004.000
0.5200.5900.6350.7200.8200.8850.9600.9601.1501.2701.560
3.5003.8804.2504.6205.0006.0007.0007.5009.000
11.00013.500
0.4700.5250.5900.6600.7450.8500.9000.9051.1051.2201.500
FLANGES Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. BHC BHD BHN C D L M R
½¾1
1-¼1-½
22-½
3468
1012
856005856007856010856012856015856020856025856030856040856060856080856100856120
036374036375036376036377036378036379036380036381036382036383036384036995036996
2.3302.7503.1203.5003.8804.7505.5006.0007.5009.500
11.75014.25017.000
0.6200.6200.6200.6200.6200.7500.7500.7500.7500.8750.8750.8750.875
4.0004.0004.0004.0004.0004.0004.0004.0008.0008.0008.000
12.00012.000
0.9901.0051.1401.3551.5601.5251.7901.8902.2903.0104.0155.7506.315
0.8401.0501.3151.6601.9002.3752.8753.5004.5006.6258.625
10.75012.750
1.7501.9002.1302.3102.6052.8253.0653.1203.6604.4605.2508.0008.500
3.5053.8704.2404.6005.0405.9506.9657.5009.000
11.00013.50016.00019.00
0.5000.5500.6350.6550.6900.8200.9550.9001.1101.2201.5051.6251.625
Note: BHN = Bolt Hole Numbers
Note: BHN = Bolt Hole Numbers
Schedule 80FLANGE
Van Stone Spig
42
Schedule 80FLANGE
Blind - One Piece
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEMSCHEDULE 80 & IPEX FITTINGS
FITTINGS
FLANGES Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. BHC BHD BHN D L M N OD R
½¾1
1-¼1-½
22-½
34
855005855007855010855012855015855020855025855030855040
036385036386036387036388036389036390036391036392036393
2.3752.7503.1253.5003.8754.7505.5006.0007.500
0.5000.5000.5000.5000.5000.6250.6250.7500.750
4.0004.0004.0004.0004.0004.0004.0004.0008.000
0.5260.7220.9361.2551.4761.9132.2902.8643.786
1.0301.1551.2501.3751.4701.5652.0002.1252.065
1.2201.3751.7502.1252.4402.9703.5654.2505.250
0.2800.4050.3150.4050.4050.5000.4400.5000.375
2.5003.8754.2504.6255.0006.0007.0007.5009.000
Note: BHN = Bolt Hole Numbers
Schedule 80FLANGE
Van Stone FPT
0.5300.5650.6250.6900.7500.8151.0001.0651.250
UNIONS Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. D1 D2 L M N OD T TD TPI
½ x ½¾ x ¾1 x 1
1-¼ x 1-¼1-½ x 1-½
2 x 23 x 34 x 4
Note: TPI = Threads Per Inch
Schedule 80UNIONS
Soc x FPT - Viton O-Rings
859005859007859010859012859015859020859030859040
036410036411036412036413036414036415236010236011
0.5260.7220.9361.2551.4761.9132.8643.786
0.8401.0501.3151.6601.9002.3753.5004.500
2.0952.3752.5652.8753.1253.6255.0655.875
1.2001.4151.7552.1602.4802.9454.2555.280
0.4700.5650.4050.6250.8451.0651.5001.875
1.9702.5002.8753.3153.5654.1905.7507.065
0.7500.8151.0651.0000.9700.9701.6251.750
0.8401.0501.3151.6601.9002.3753.5004.500
14.00014.00011.50011.50011.50011.5008.0008.000
43
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEMSCHEDULE 80 & IPEX FITTINGS
FITTINGS
UNIONS Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. C D L M Q
¼ x ¼3⁄8 x 3⁄8½ x ½¾ x ¾1 x 1
1-¼ x 1-¼1-½ x 1-½
2 x 2 3 x 34 x 4
857002857003857005857007857010857012857015857020857030857040
036833036834036835036836036837036838036839036840036842036843
0.6250.7500.8951.0101.1501.2701.3851.5101.8902.250
0.3020.4230.5260.7220.9361.2551.4761.9132.8643.786
1.9252.1402.3052.5902.8903.3853.8404.1504.9705.920
0.8551.0001.2001.4151.7552.1602.4802.9454.2555.280
Schedule 80UNIONS
Soc x Soc - Viton O-Rings
1.6501.7851.9852.3702.6803.0953.8354.8056.9207.125
UNIONS Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. C D L M Q
¼ x ¼3⁄8 x 3⁄8½ x ½¾ x ¾1 x 1
1-¼ x 1-¼1-½ x 1-½
2 x 2 3 x 34 x 4
897002897003897005897007897010897012897015897020897030897040
236004236005036956036964036980036981036982036983036984236006
0.6250.7500.8901.0151.1351.2701.3851.5151.8802.250
0.3020.4230.5260.7220.9361.2551.4761.9132.8643.786
1.9402.1552.3102.5702.8603.3953.8204.1854.9555.875
0.8551.0001.2001.4151.7552.1602.4802.9454.2555.280
Schedule 80UNIONS
Soc x Soc - EDPM O-Rings
1.6551.7801.9802.3452.6653.0853.8054.8054.0107.065
UNIONS Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. D L M Q T
¼ x ¼3⁄8 x 3⁄8½ x ½¾ x ¾1 x 1
1-¼ x 1-¼1-½ x 1-½
2 x 2 3 x 34 x 4
858002858003858005858007858010858012858015858020858030858040
036844036845036846036847036848036849036850036851036852036853
0.3020.4230.5260.7220.9361.2551.4761.9132.8643.786
1.9452.1452.1302.1802.6453.1253.5853.8904.2755.920
0.8551.0001.2001.4151.7552.1602.4802.9454.2555.280
1.6451.7801.9752.3602.6753.1003.8304.8056.9457.125
Schedule 80UNIONS
FPT x FPT - Viton O-Rings
0.5850.6000.8100.8251.0201.1551.2701.3801.5552.245
44
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEMSCHEDULE 80 & IPEX FITTINGS
FITTINGS
UNIONS Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. D L M Q T
¼ x ¼3⁄8 x 3⁄8½ x ½¾ x ¾1 x 1
1-¼ x 1-¼1-½ x 1-½
2 x 2 3 x 34 x 4
898002898003898005898007898010898012898015898020898030898040
236007236008036985036986036987036988036989036990036993236009
0.3020.4230.5260.7220.9361.2551.4761.9132.8643.786
1.9402.1552.1152.3502.6503.1053.0703.3004.2605.860
0.8551.0001.2001.4151.7552.1602.4802.9454.2555.280
1.6551.7801.9802.2902.6653.0903.8104.7856.9156.980
Schedule 80UNIONS
FPT x FPT - EDPM O-Rings
0.5000.5000.8150.8201.0151.1301.2651.3951.5451.480
ADAPTERS Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. D L1 L2 M1 M2 N R
½ x ½¾ x ¾1 x 1
1-¼ x 1-¼1-½ x 1-½
2 x 2 3 x 34 x 4
Schedule 80ADAPTERS – MISC
Tank - Soc x FPT
871005871007871010871012871015871020871030871040
036038036039036040036041036042036043036218036046
0.5260.7220.9361.2551.4761.9132.8643.786
2.4402.4702.8152.8452.8153.2504.5004.000
2.9052.9403.3153.4053.6254.1255.5005.000
1.2201.6251.9702.3152.6903.2504.5655.500
2.0302.2502.6253.0953.5954.8756.0007.500
1.5001.1901.2501.5301.2501.6252.1901.250
0.6250.6250.6250.6250.6250.7501.0001.250
ADAPTERS Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. D L1 L2 M1 M2 N R
½ x ½¾ x ¾1 x 1
1-¼ x 1-¼1-½ x 1-½
2 x 2 3 x 34 x 4
Schedule 80ADAPTERS – MISC
Tank - FPT x FPT
872005872007872010872012872015872020872030872040
036047036048036049036050036051036052036053036055
0.5260.7220.9361.2551.4761.9132.8643.786
2.1902.4702.8152.8453.0653.2504.5004.000
2.9402.9403.3153.4053.5954.1255.5005.000
1.2201.6251.9702.3152.6903.2504.5655.500
2.0302.2502.6253.0953.5954.8756.0007.500
1.5001.5001.2501.5301.6902.8152.6902.000
0.6250.6250.6250.6250.6250.7501.0001.250
45
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEMSCHEDULE 80 & IPEX FITTINGS
FITTINGS
ADAPTERS Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. AF C D L M T
¼ x ¼3⁄8 x 3⁄8½ x ½¾ x ¾1 x 1
1-¼ x 1-¼1-½ x 1-½
2 x 22-½ x 2-½
3 x 34 x 46 x 6
Schedule 80ADAPTERSSoc x FPT
835002835003835005835007835010835012835015835020835025835030835040835060
036209036210036211036212036213036214036215036216036217036218036219036221
0.8201.0001.3851.6301.9552.3852.6953.2453.8304.6505.8657.590
0.6350.7500.8901.0001.1301.2701.3901.5101.7701.9052.2753.005
0.3020.4230.5260.7220.9361.2551.4761.9132.2902.8643.7865.709
1.3201.4601.7451.8802.1802.3652.4802.6553.3553.5654.0355.260
0.8201.0001.2501.4651.7802.1602.6252.9503.5404.2405.3407.590
0.5950.6100.7500.7700.9500.9800.9951.0301.4051.4851.5902.055
ADAPTERS Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. C D L M S
½ x ½¾ x ¾1 x 1
1-¼ x 1-¼1-½ x 1-½
2 x 22-½ x 2-½
3 x 34 x 4
Schedule 80ADAPTERSSoc x MPT
836005836007836010836012836015836020836025836030836040
036420036421036422036423036424036425036426036427036428
0.8901.0151.1401.2701.3851.5151.7651.8902.270
0.5260.7220.9361.2551.4761.9132.2902.8643.786
1.8902.0852.3902.6102.7452.9253.5104.0404.385
1.2501.4651.7802.1602.6252.9503.5404.2405.340
0.7550.8200.9751.0201.0301.0701.4101.7401.740
ADAPTERS Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. AF D L M N T
½ x ½¾ x ¾1 x 1
1-¼ x 1-¼1-½ x 1-½
2 X 23 x 34 x 4
Schedule 80ADAPTERS
Spig x SS Reinforced FPT
878005SR878007SR878010SR878012SR878015SR878020SR878030SR878040SR
036965036966036967036968036969036970236000236001
1.3951.6802.0152.1702.4903.3754.2854.745
0.8401.0501.3151.6601.9002.3753.5004.500
1.7501.9352.2502.4702.6552.8153.8154.375
1.2201.3751.6902.0652.4403.0304.2805.250
0.1550.1900.2200.2500.2800.3650.5300.625
0.6950.6950.8900.9450.9600.9901.3501.630
46
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEMSCHEDULE 80 & IPEX FITTINGS
FITTINGS
ADAPTERS Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. AF D L M1 M2 N T
½ x ½¾ x ¾1 x 1
1-¼ x 1-¼1-½ x 1-½
2 x 22-½ x 2-½
3 x 34 x 4
Schedule 80ADAPTERS
Soc x SS Reinforced FPT
835005SR835007SR835010SR835012SR835015SR835020SR835025SR835030SR835040SR
036971069972036973036974036975036976036977036978036979
1.3901.4952.0152.4402.8053.3753.6004.2805.805
0.5260.7220.9361.2551.4761.9132.2902.8643.786
1.7501.8752.1552.3152.4402.6903.2503.5003.970
1.1901.4051.7502.1252.4053.0003.5604.2505.220
1.2201.3751.6902.0652.4403.0303.5904.2805.250
0.1900.1250.1250.1900.2200.2800.3450.2200.125
0.6900.7500.9150.9150.9150.9401.3251.4451.530
NIPPLES Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. D L
¼ x 7⁄83⁄8 x 1
½ x 1-1⁄8¾ x 1-3⁄81 x 1-½
1-¼ x 1-5⁄81-½ x 1-¾
2 x 22-½ x 2-½
3 x 2-5⁄84 x 2-7⁄8
Schedule 80NIPPLES
Close
880005881005882005883005884005885005886015887005888005889005889005
036434036435036436036437036438036439036440036441036442036443036444
0.3020.4230.5260.7220.9361.2551.4761.9132.2902.8643.786
0.8751.0001.1251.3751.5001.6251.7502.0002.5002.6252.875
47
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEMSCHEDULE 80 & IPEX FITTINGS
FITTINGS
NIPPLES Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. D1 D2 L1 L2
¼ x 1-½¼ x 2
¼ x 2-½¼ x 3
¼ x 3-½¼ x 4
¼ x 4-½¼ x 5¼ x 6¼ x 8
¼ x 10¼ x 12
3⁄8 x 1-½3⁄8 x 2
3⁄8 x 2-½3⁄8 x 3
3⁄8 x 3-½3⁄8 x 4
3⁄8 x 4-½3⁄8 x 53⁄8 x 63⁄8 x 8
½ x 1-½½ x 2
½ x 2-½½ x 3
½ x 3-½½ x 4
½ x 4-½½ x 5
½ x 5-½½ x 6½ x 8
½ x 10½ x 12
¾ x 1-½¾ x 2
¾ x 2-½¾ x 3
¾ x 3-½¾ x 4
¾ x 4-½¾ x 5
¾ x 5-½¾ x 6¾ x 8
¾ x 10¾ x 12
Schedule 80NIPPLESStandard
880015880020880025880030880035880040880045880050880060880080880100880120881015881020881025881030881035881040881045881050881060881080882015882020882025882030882035882040882045882050882055882060882080882100882120883015883020883025883030883035883040883045883050883055883060883080883100883120
036445036456036457036458036459036460036461036462036463036464236012236013036446036466036467036468036469036470036471036472036473036474036447036475036476036477036478036479036480036481036445036456036457036458036459036460036461036462036463036464236012236013036446036466036467036468036469036470
0.3020.3020.3020.3020.3020.3020.3020.3020.3020.3020.3020.3020.4230.4230.4230.4230.4230.4230.4230.4230.4230.4230.5260.5260.5260.5260.5260.5260.5260.5260.5260.5260.5260.5260.5260.7720.7220.7220.7220.7220.7220.7220.7220.7220.7220.7220.7220.722
0.5400.5400.5400.5400.5400.5400.5400.5400.5400.5400.5400.5400.6750.6750.6750.6750.6750.6750.6750.6750.6750.6750.8400.8400.8400.8400.8400.8400.8400.8400.8400.8400.8400.8400.8401.0501.0501.0501.0501.0501.0501.0501.0501.0501.0501.0501.0501.050
1.5002.0002.5003.0003.5004.0004.5005.0006.0008.000
10.00012.0001.5002.0002.5003.0003.5004.0004.5005.0006.0008.0001.5002.0002.5003.0003.5004.0004.5005.0005.5006.0008.000
10.00012.0001.5002.0002.5003.0003.5004.0004.5005.0005.5006.0008.000
10.00012.000
0.6201.1201.6202.1202.6203.1203.6204.1205.1207.1209.120
11.1200.6201.1201.6202.1202.6203.1203.6204.1205.1207.1200.4400.9401.4401.9402.4402.9403.4403.9404.4404.9406.9408.940
10.9400.4000.9001.4001.9002.4002.9003.4003.9004.4004.9006.9008.900
10.900
Continued
48
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEMSCHEDULE 80 & IPEX FITTINGS
FITTINGS
NIPPLES Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. D1 D2 L1 L2
1 x 21 x 2-½
1 x 31x 3-½1 x 4
1x 4-½1 x 5
1 x 5-½1 x 61 x 8
1 x 101 x 12
1-¼ x 21-¼ x 2-½
1-¼ x 31-¼ x 3-½
1-¼ x 41-¼ x 4-½
1-¼ x 51-¼ x 61-¼ x 8
1-¼ x 101-¼ x 121-½ x 2
1-½ x 2-½1-½ x 3
1-½ x 3-½1-½ x 4
1-½ x 4-½1-½ x 5
1-½ x 5-½1-½ x 61-½ x 8
1-½ x 101-½ x 122 x 2-½
2 x 32 x 3-½
2 x 42 x 4-½
2 x 52 x 5-½
2 x 62 x 8
2 x 102 x 12
2-½ x 32-½ x 42-½ x 52-½ x 62-½ x 8
2-½ x 102-½ x 12
Schedule 80NIPPLES
Standard Cont.
884020884025884030884035884040884045884050884055884060884080884100884120885020885025885030885035885040885045885050885060885080885100885120886020886025886030886035886040886045886050886055886060886080886100886120887025887030887035887040887045887050887055887060887080887100887120888030888040888050888060888080888100888120
036471036472036473036474036447036475036476036477036478036479036480036481036450036516036517036518036519036520036521036522036523036524036525036451036526036527036528036529036530036531036532036533036534036535036536036452036539036540036541036542036543036544036545035546036547036548036549036550036272036551036552036276036553
0.9360.9360.9360.9360.9360.9360.9360.9360.9360.9360.9360.9361.2551.2551.2551.2551.2551.2551.2551.2551.2551.2551.2551.4761.4761.4761.4761.4761.4761.4761.4761.4761.4761.4761.4761.9131.9131.9131.9131.9131.9131.9131.9131.9131.9131.9132.2902.2902.2902.2902.2902.2902.290
1.3151.3151.3151.3151.3151.3151.3151.3151.3151.3151.3151.3151.6601.6601.6601.6601.6601.6601.6601.6601.6601.6601.6601.9001.9001.9001.9001.9001.9001.9001.9001.9001.9001.9001.9002.3752.3752.3752.3752.3752.3752.3752.3752.3752.3752.3752.8752.8752.8752.8752.8752.8752.875
2.0002.5003.0003.5004.0004.5005.0005.5006.0008.000
10.00012.0002.0002.5003.0003.5004.0004.5005.0006.0008.000
10.00012.0002.0002.5003.0003.5004.0004.5005.0005.5006.0008.000
10.00012.0002.5003.0003.5004.0004.5005.0005.5006.0008.000
10.00012.0003.0004.0005.0006.0008.000
10.00012.000
0.6401.1401.6402.1402.6403.1403.6404.1404.6406.6408.640
10.6400.5801.0801.5802.0802.5803.0803.5804.5806.5808.580
10.5800.5601.0601.5602.0602.5603.0603.5604.0604.5606.5608.560
10.5600.9801.4801.9802.4802.9803.4803.9804.4806.4808.480
10.4800.7201.7201.8003.7205.7207.1509.720
Continued
49
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEMSCHEDULE 80 & IPEX FITTINGS
FITTINGS
NIPPLES Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. D1 D2 L1 L2
3 x 33 x 43 x 53 x 63 x 83 x 103 x 124 x 44 x 54 x 64 x 8
4 x 104 x 12
Schedule 80NIPPLES
Standard Cont.
889030889040889050889060889080889100889120890040890050890060890080890100890120
036554036555035556035557036558036559035560036562036563036564036565036566036567
2.8642.8642.8642.8642.8642.8642.8643.7863.7863.7863.7863.7863.786
3.5003.5003.5003.5003.5003.5003.5004.5004.5004.5004.5004.5004.500
3.0004.0005.0006.0008.000
10.00012.0004.0005.0006.0008.000
10.00012.000
0.6001.6002.6003.6005.6007.6009.6001.4002.4003.4005.4007.4009.400
CAPS Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. C D M W
¼3⁄8½¾1
1-¼1-½
22-½
3468
Schedule 80CAPS
Soc Cap
847002847003847005847007847010847012847015847020847025847030847040847060847080
036056035057036058036059036060036061036062036063036064036065036066036067036068
0.7300.8700.8851.0001.1251.2651.3951.5101.7801.8852.2853.0555.630
0.3000.4230.5260.7220.9361.2551.4761.9132.2902.8643.7865.7097.565
0.8150.9701.1851.4001.7502.0902.3552.8553.5254.1805.2507.5859.685
0.9401.1551.2601.3601.5801.7301.9302.1452.6352.8503.3354.8256.495
CAPS Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. C D M W
¼3⁄8½¾1
1-¼1-½
22-½
34
Schedule 80CAPS
FPT Cap
848002848003848005848007848010848012848015848020848025848030848040
036072036073036074036075036076036077036078036079036080036081036082
0.6450.7500.8751.0001.1251.2501.3751.5001.7501.8752.250
0.3000.4230.5260.7220.9361.2551.4761.9132.2902.8643.786
0.9050.9701.2951.5201.8302.2352.4903.0403.6254.3055.470
0.9400.9051.1851.2551.4901.5001.5451.7102.4402.5202.880
50
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
product
PRESSURE PIPING SYSTEMSCHEDULE 80 & IPEX FITTINGS
FITTINGS
PLUGS Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. D L T I Q
2
Schedule 80PLUGS
Spig Plug
849020 036585 2.375 1.875 0.380 1.520
PLUGS Xirtec Critical Dimensions Nom. Univ. IPEX Pipe Size Part No. Part No. D L Q S
¼3⁄8½¾1
1-¼1-½
22-½
346
Schedule 80PLUGS
MPT Plug
850002850003850005850007850010850012850015850020850025850030850040850060
036568035569036570036571036572036573036574036575036576036577036578036579
0.5400.6750.8401.0501.3151.6601.9002.3752.8753.5004.5006.625
0.7250.7600.9751.0501.2051.4351.4601.4401.9702.0002.0902.085
0.6350.8001.1201.3751.6902.0552.3152.7803.1203.7404.7306.850
0.5450.5650.7200.7500.9051.0051.0251.0101.5701.6301.7101.565
2.565
51
Imported fi ttings from Aliaxis.
Imported fi ttings from Aliaxis.
DisclaimerThis brochure has been compiled by Paling Industries Sdn Bhd (“the company”) to promote better understanding of the technical aspects of the Company’s products to assist users in obtaining from them the best possible performance. The brochure is supplied subject to acknowledgment of the following conditions:i) The brochure is protected by Copyright and may not be copied or reproduced in any form or by any means in whole or in part without prior consent in writing by the Company. ii) Product specifications, usage data and advisory information may change from time to time with advances in research and field experience. The Company reserves the right to make such changes at any time without notice. iii) Correct usage of the Company’s products involve engineering judgements which cannot be properly made without full knowledge of all the conditions pertaining to each specific installation. The Company expressly disclaims all and any liability to any person done by any such person in reliance whether whole or partial upon the whole or any part of the contents of this brochure. iv) No offer to trade, nor nay conditions of trading, are expressed or implied by the issue or content of this brochure. v) Nothing herein shall override the Company’s conditions of Sale, which may be obtained from the Registered Office or nay Sales Office of the Company. vi) This brochure is and shall remain the property of the Company, and shall surrendered on demand to the Company.
PALING INDUSTRIES SDN BHD (11039 V)
Lot 12, Jalan Perusahaan 4, 68100 Batu Caves, Selangor Darul Ehsan, Malaysia.
Tel: 603 - 6189 8333 (General) / 603 - 6189 6389 (Sales)
Fax: +603 6188 3810
Email: [email protected]
Website: www.paling.com.my
Distributed by:
The Water Del ivery System