Software rel. 2.3.x

PRESSURE AND LEVEL MONITOR VERSION

2

CONTENTS

● Legendofsymbols.....................................................................................................3INTRODUCTION ............................................................................................................4 Productdescription....................................................................................................4INTENDED USE .............................................................................................................4CONTENT OF THE PACKAGE .....................................................................................4PRECAUTIONS .............................................................................................................4RISKS AND PROTECTIONS BEFORE ASSEMBLY ....................................................5 Positioning..................................................................................................................5 Powersupplyandsensorconnection........................................................................5ASSEMBLY DIAGRAMS ...............................................................................................6CONTROLS IN THE MENU ...........................................................................................7 Firstswitchingon.......................................................................................................7 Controlsinthemenu..................................................................................................8 Workparameters........................................................................................................9MENU STRUCTURE ....................................................................................................10PRELIMINARY SETUP FOR USE ............................................................................... 11 Alarms...................................................................................................................... 11 Sensors....................................................................................................................14 Flowmetercalibration (TOBEUSEDFORAUTOMATICTANKCALIBRATIONONLY).............................15 Tank..........................................................................................................................18 Tankcalibration........................................................................................................19 Load/Savetank........................................................................................................23 Language.................................................................................................................25 Unitsofmeasurement..............................................................................................26 Displaycontrast........................................................................................................28 Alarmtones..............................................................................................................29 Keytones..................................................................................................................29 Operatingmode.......................................................................................................30 Setupmanagement..................................................................................................31 Testmenu.................................................................................................................33USE ..............................................................................................................................35MAINTENANCE / DIAGNOSTICS / REPAIRS ............................................................36 Troubleshooting........................................................................................................36END OF LIFE DISPOSAL ............................................................................................36TECHNICAL DATA ......................................................................................................37 Devicetechnicaldata...............................................................................................37 Setupmenu..............................................................................................................38GUARANTEE TERMS .................................................................................................39

3

● Legendofsymbols

= Genericdanger

= Warning

This manual is an integral part of the equipment to which it refers and must accompany the equipment in case of sale or change of ownership. Keep it for any future reference; ARAG reserves the right to modify product specifications and instructions at any moment and without notice.

4

INTRODUCTION

Productdescription

VISIOisaverycompactandaccuratetop-notchmultifunctiondisplay,abletodisplayanykindofinformationconcerningagriculturaltreatments.Operatorcanselecttherequiredfunctionviasoftware.Itcandisplayseveraltypesofvalues,whichchangeaccordingtosetoperatingmodeandtypeofconnectedsensors.

INTENDED USE

This device is designed towork onagriculturalmachinery for spraying and cropsprayingapplications.ThemachineisdesignedandbuiltincompliancewithENISO14982standard(Electromagneticcompatibility-Forestryandfarmingmachines),harmonizedwith 2014/30/UEDirective.

CONTENT OF THE PACKAGE

ThetablebelowindicatesthecomponentsthatyouwillfindintheVISIOpackage:

Legend:

1 VISIO2 Fixingkit3 Instructionmanual (onCD-ROM)4 Installationsheet

PRECAUTIONS

•Donotaimwaterjetsattheequipment.•Donotusesolventsorfueltocleanthecaseoutersurface.•Donotcleanequipmentwithdirectwaterjets.•Complywiththespecifiedpowervoltage(12VDC).•Incaseofvoltaicarcwelding,removeconnectorsfromVISIOanddisconnectthepowercables.•OnlyuseARAGgenuinesparepartsandaccessories.

P o w e r c a b l e ,s e n s o r s a n dconnection cablesto be connectedto VISIO must beorderedseparately.

5

RISKS AND PROTECTIONS BEFORE ASSEMBLY

Allinstallationworksmustbedonewithbatterydisconnected,usingsuitabletoolsandanyindividualprotectionequipmentdeemednecessary.

Positioning

1) Set mounting rail in cabin and fasten it with the relevant screws (1), in a position where VISIO can be easily seen and athands' reach, but away from any moving organs.2) Secure VISIO to rail and push downuntil locked in place.3) Fasten wiring so that it does notinterfere with any moving parts.

Powersupplyandsensorconnection

Sensorsandpowersupplymustbeinstalledandconnectedbyqualifiedpersonnel.VISIOmustbeexclusivelyconnectedtoARAGequipment.WHENARCWELDINGISREQUIRED,MAKESURETHATEQUIPMENTPOWER IS SWITCHED OFF; DISCONNECT POWER CABLES IF NEEDED.ARAGisnotliablefordamagetothesystem,persons,animalsorpropertycausedbyVISIOwrongorunsuitableassembly.Failuretoobservetheaboveinstructionsautomaticallyvoidsthewarranty.

Wirecolor (powercable) Connectionof

red positive

black negative

green countingabort-groundconnection

yellow countingabort-connection+12VDC

power supplysensors

6

ASSEMBLY DIAGRAMS

+12Vdc

GND

Counting abortGround

connection(green wire)

Counting abortConnection

+12VDC

(yellow wire)

* Ifyouwishtocalibratetankautomatically(seerelevantparagraph),temporarilyconnectaflowmeteratsensor2inlet.Oncecalibrationiscompleted,connectionwithpressuresensorshallberestored.

Legend:

1)Powercable2)Connectioncablefordoublesensor3)Flowmeter*4)Pressuresensor5)Levelsensor

7

CONTROLS IN THE MENU

Firstswitchingon

Atfirstswitchingon,VISIOwillrunaguidedprocedureallowingusertosetthedevice'sbasicsettings.

Press toscrollthroughitems,OKtosaveandmoveontonextsetting,orESCtogobacktoprevioussetting.

WARNING:Beforechangingoperatingmode,makesurethatallsensors/flowmetersareDISCONNECTEDfromthedevice.

8

Controlsinthemenu

Inthefollowingpages,accordingtothesetoperatingmode,somemenuitemscouldslightlydifferfromtheshownones.

SWITCHING ONAPressfor1secondBPressthekeyafewtimestoviewthevariousvaluesinextendedmode(ondisplaycentralpart)Everytimethedeviceisswitchedon,itwillshortlyshowapagewiththenameofdeviceandsoftwareversion

SWITCHING OFFAPressfor2seconds

ACCESS TO SETUP MENUFromthemainpage,presskeysatthesametimefor2secondstoopentheSetupMenu

SELECTION AND ACCESS TO MENU ITEMS

APressafewtimestoscrollthroughitems(selecteditemisindicatedbyablackline)BPresstoopentheselectedmenuitem

Thethreedotsunderanitemindicatepresenceofanothersetupmenu

9

EDITING A VALUEAPresstomovethroughdigitsBPressafewtimestoeditthehighlighteddigitCPresstoconfirm.ThedisplaygoesbacktopreviouspageDPresstoexitpagewithoutconfirmingmodification

Editedvaluemustfallwithintherangeshown

Workparameters

0

0% 50%25% 100%75%

0.0 bar

0

0% 50%25% 100%75%

0.0 bar

0% 50%25% 100%75%

0.0 bar

0% 50%25% 100%75% Fromthemainpage,presskeyfortwosecondstoopenWorkParametersmenu,andsetvaluesforLevelcorrection.

10

MENU STRUCTURE

Alarms

Min pressureMax pressureTank reserveMax level

Sensors

Calib. flowmeterMan. calibration

Options

Language

Units of measurem.

Flowrate

VolumelGalm

3

Display contrast

Alarm tones

Keytones

l/minGPMm

3/h

Operating mode

0.0 bar

0.0

0% 50%25% 100%75%

Tank

Capacity

Tank zero value

CalibrationMan. calibrationAuto calibration

Load/Save TankSave tank profileLoad tank profile

Pressure sensorMax pressurePress. zero value

Pressurebarpsi

Setup management

Save setupLoad setup

Test

Firmware versionBattery voltageDisplayKeysSensors

Level / Pressure

11

PRELIMINARY SETUP FOR USE

Alarms

Setthedesiredalarmdisplaythresholds.

Tank reserve alarm

Setthevalueoftheminimumfluidquantityleftinthetank.

1)Opentankreservealarmmenu(Setupmenu>Alarms>Tankreserve).Thedisplaywillshowthecurrentsettingbelowtheselecteditem.PressOKtoedittheselectedmenuitem

2)Todeactivatethealarm,press and

atthesametimeuntilthesetvalue

disappearsandthemessageOFFisdisplayedinstead.Carryoutthesameproceduretoenablealarmagain.3)Setalarmvalue:A)Presstomovethroughdigits.B)Pressafewtimestoeditthehighlighteddigit.C)Presstosavechanges,orD)Presstoquitthepagewithoutconfirmingchanges.

12

Max tank level

Set themaximumtankcapacitypercentagevaluefor thedesiredalarmactivationthreshold.

1)Opentankmaxlevelmenu(Setupmenu>Alarms>Maxlevel).Thedisplaywillshowthecurrentsettingbelowtheselecteditem.Press OK toedittheselectedmenuitem.

2) Toactivatethealarm,press and

atthesametimeuntilthemessage OFFgoesoffandthealarmvalueisdisplayedinstead.Carryoutthesameproceduretodisablealarmagain.3)Setalarmvalue:A)Presstomovethroughdigits.B)Pressafewtimestoeditthehighlighteddigit.C)Presstosavechanges,orD)Presstoquitthepagewithoutconfirmingchanges.

13

Pressure alarms

Setminimumandmaximumpressurethresholdsforalarmmessage.

1)OpenAlarmmenu(Setupmenu>Alarms).

Minimumandmaximumpressurealarmsaresetinthesameway.

Press OK toedittheselectedmenuitem.

2)Toactivatethealarm,press and

keyatthesametimeuntilmessage

OFFgoesoffandpressurealarmvalueisdisplayedinstead.Carryoutthesameproceduretodisablealarmagain.

3)Setalarmvalue:A)Presstomovethroughdigits.B)Pressafewtimestoeditthehighlighteddigit.C)Presstosavechanges,orD)Presstoquitthepagewithoutconfirmingchanges.

14

Sensors

1)OpenSensorsmenu(Setupmenu>Sensors).

Themenuitemsdisplayedbelowchangeaccordingtothesetoperationmode:whenmoreitemsareavailable,selectthedesiredoneandpressOKtoeditit.

15

Flowmetercalibration (TOBEUSEDFORAUTOMATICTANKCALIBRATIONONLY)

Duetothedifferentsystemconfigurations(tubes,valves,etc.)ratereadingcouldnotbecorrect.Itisthereforerecommendedtoperformasprayingtest.Ifmeasuredvalueisdifferentfromactualvalue,changetherateconstantthroughanautomaticcalibrationprocedureormanuallycalculatetheconstant.

Manual calibration

Inordertomanuallysetrateconstant,calculateandsetsuitableconstantusingthefollowingformula:

1)Openmanualcalibrationmenu(Setupmenu>Calibration>Man.Calibration).UnderCalibrationmenu,selectMan.Calibration,toviewcurrentlysetconstantvaluebelowtheitem.PressOKtoeditthevalue.

Forflowmeterconstantvalue,refertothecorrespondingmanual.

2)Setflowmeterconstantvalue:A)Presstomovethroughdigits.B)Pressafewtimestoeditthehighlighteddigit.C)Presstosavechanges,orD)Presstoquitthepagewithoutconfirmingchanges.

[quantity measured by equipment]

[actually sprayed quantity]x [constant indicated on flowmeter body]

16

Max. pressure

Setmaximumpressurethatcanbereadbysensor.

1)Opensensormaximumpressuresetting(Setupmenu>Sensors>Pressuresensor>Maxpressure).

Thedisplaywillshowthecurrentsettingbelowtheselecteditem.

Press OK toedittheselectedmenuitem.

2)Setsensormaximumpressure:A)Presstomovethroughdigits.B)Pressafewtimestoeditthehighlighteddigit.C)Presstosavechanges,orD)Presstoquitthepagewithoutconfirmingchanges.

17

Pressure zero value

Setpressuresensorzerovalue.Pressuresensormustberesetwheneversystemstatusandpressuresensorreadingareinconsistent(e.g.pressurereadingwhensystemisstopped).ThepressurezerovaluemustALWAYSbesavedWITHSYSTEMSTOPPED.

1)Openpressuresensorzerosetting(Setupmenu>Sensors>Pressuresensor>Press.zerovalue).

Thedisplaywillshowthecurrentsettingbelowtheselecteditem.

Press OK toedittheselectedmenuitem.

2) PressOK:VISIOwillcalculatethepressuresensorzerovalue,whichwillbeshowninthebottompartofthedisplay(e.g.,4,000mAintheimageontheside).

Ifasensormalfunctionoccurs,themessageCheck sensor!willbeshowninthetoppartofthedisplay.

18

Tank

Fromthismenuitispossibletoviewandsetanumberoftankvalues.-Capacity:thedisplayshowsthemaximumtankcapacityvalue,aspreviouslycalculatedthroughcalibration.Thisvalueisread-only.

Tank zero value

Setlevelsensorzerovalue.Thelevelsensormustberesetinthefollowingcases:1)Iftherearediscrepanciesbetweenthequantityoffluidinthetankandthevaluemeasuredbythelevelsensor(e.g.,fluidpresencedetectedbutemptytank).2)EVERYTIMEacalibrationcurveisuploadedviaUSB.ThetankzerovaluemustALWAYSbesavedWITHANEMPTYTANK.

1)Opentankzerovaluemenu(Setupmenu>Tank>Tankzerovalue).Thedisplaywillshowthecurrentsettingbelowtheselecteditem.Press OK toedittheselectedmenuitem.

2)PressOK:VISIOwillsavethelevelsensorzerovalue,whichwillbeshowninthebottompartofthedisplay(e.g.,3.964mAintheimageontheside).

Ifasensormalfunctionoccurs,themessageCheck sensor!willbeshowninthetoppartofthedisplay.

19

Tankcalibration

Thetankprofilecalibrationcanbecarriedoutinmanualorautomaticmode.Duringcalibration,VISIOwillsaveupto200calibrationpointstocreatethetankprofilecurve.If necessary, the tank profile can be saved and reimported intoVISIO orcompatibleARAGComputers(Bravo180S/300S/400S)atalatertime(e.g.,whenreusingthesametank).Beforestartingtheprocedurecarryoutthefollowingoperations:1)Fill the tankwith cleanwaterWITHOUTADDINGCHEMICALSUBSTANCES.Thetankmustbefull.2)Visuallycheckthereachedlevel.

Automatic tank calibration

1)Openautomaticcalibrationmenu(Setupmenu>Tank>Autocalibration).Press OK toedittheselectedmenuitem.

2)Setthetankmaximumcapacityvalue,i.e.,thetheoreticalquantityoffluidthatwaspreviouslyintroduced:A)Presstomovethroughdigits.B)Pressafewtimestoeditthehighlighteddigit.C)Presstosavechanges,orD)Presstoquitthepagewithoutconfirmingchanges.Assoonasmenuisopen,theequipmentisreadytostartmeasuringwithnofurthercontrolsbeingrequired.3)Starttankdraining.Thedisplaywillstartshowingtheincreasingmeasuredfluidquantityvalue(centralareaofthedisplay),theinstantflowratevalue(bottomright),andtheprogressivenumberofmeasuredcalibrationpoints(bottomleft).

Ifasensormalfunctionoccurs,themessageCheck sensor! willbeshowninthetoppartofthedisplay.

20

4) Oncethetankhasbeencompletelydrained,thevalueinthecentralareaofthedisplaywillstopchanging,andthemessageCompl. calib.?willappearinthedisplaytoppart.Press OK for1secondtocompletecalibration.

5) Thedisplaywillgobacktothepreviousmenuandwillshowtheacquiredvalue.Incaseofmeasurementerrors,orifitisnecessarytostopthecalibration,pressESCfor2secondstoquitthecalibrationprocedurewithoutsaving.Inthiscase,thecurvewillbetheonepreviouslymeasured,orthedefaultcurve.

21

Manual tank calibration

Toperformmanualcalibration,proceedasfollows:1)Calculate thesuitable calibration intervalwith respect to tankmaximumcapacity,bearinginmindthat:-itispossibletosaveupto200calibrationpoints;-ahighnumberofcalibrationpointsmakesformoreaccuratemeasurements.2)Adoptareliablemethodformeasuringthefluidquantitythatwaspreviouslycalculated.Example:

[2000 liters] = maximum tank capacity;[200 points] = set calibration points;[10 liters] * = measurement value in liters.*IMPORTANT:Setameasurementvaluethatisslightlyhigher(e.g.,11liters)thantheformula,inordertomakeupforanyerrorsintheevaluationoftankmaximumcapacity.

1) Openmanualcalibrationmenu(Setupmenu>Tank>Man.Calibration).Press OK toedittheselectedmenuitem.Assoonasmenuisopen,theequipmentisreadytostartmeasuringwithnofurthercontrolsbeingrequired.

2)Starttankdraining.Once the measurement container is full, stop draining and, in the display central part, enter the volume of the drained fluid with respect to the previous calibration point:A)Presstomovethroughdigits.B)Pressafewtimestoeditthehighlighteddigit.C)Presstoconfirm.

[2000 liters]

[200 points]= [10 liters]

22

ThemessageStabilization willappearinthedisplaytoppartforafewseconds,thenitwillswitchbacktoRec. cal. point.

Thevalueofcalibrationpointswillincreasebyoneunit,andthevalueoftheprogressivelydrainedpartialvolumewillshowthequantityoffluidmeasureduptothatmoment.VISIOisreadyforanewmeasurement.

Itispossibletosavecalibrationpointsobtainedwithdifferentquantitiesofdrainedfluid.

4)Oncethetankhasbeenemptiedcompletely,press OK keyfor1secondtocompletethecalibrationprocessandsavetherelevantcurve.

5) Thedisplaywillgobacktothepreviousmenuandwillshowtheacquiredvalue.Incaseofmeasurementerrors,orifitisnecessarytostopthecalibration,pressESCkeyfor1secondtoquitthecalibrationprocedurewithoutsaving.Inthiscase,thecurvewillbetheonepreviouslymeasured,orthedefaultcurve.

23

Load/Savetank

ThetankcalibrationcanbesavedorloadedontoaUSBpendrive,inordertorestoreitifrequired,fixproblemsorsetanotherVISIOwithnoneedtorepeatallcalibrationoperations.Onceinstallationiscompleted,checkVISIOoperationanditisrecommendedtosavethetankconfigurationonaUSBpendrive.ToloadorsavethecalibrationcurveitisnecessarytoinsertaUSBpendriveintherelevantportatthebottomofVISIO.

1)Opentankconfigurationmenu(Setupmenu>Tank>Load/SaveTank).Press OK toedittheselectedmenuitem.

Load tank profile

AllowstoselectthetankconfigurationfilesavedintheUSBpendriveandtosetVISIOagain.

WARNING:ByloadingtheTANK.TKLfilecontainedintheUSBpendriveontotheVISIO,thecurrenttankprofilewillbelost.

1) Selectcontrolthrough .

2)PressOKtoconfirmloading,orESCtoquitwithoutsaving.

TheTANK.TKLfilecanbeloadedonlyifitissavedintheUSBpendriverootdirectory.

24

Save tank profile

AllowssavingthetankconfigurationfileontheUSBpendrive:itwillbepossibletoloaditagainanytimethesamesettingsneedtoberetrieved.

1)Selectcontrolthroug .

2) PressOKtoconfirmsaving,orESCtoquitwithoutsaving.

IfaTANK.TKLfileisalreadypresentintheUSBpendriverootdirectory,thefilewillbeoverwritten.

25

Language

Setthedesiredlanguage.

Options

Language

English

Units of measurem.

Display contrast

Openlanguagesettingmenu(Setupmenu>Options>Language).Thedisplaywillshowthecurrentsettingbelowtheselecteditem.

PressOK toeditlanguage.

2 1

2

Language

English

ČeskDeutsch

Español

1)Selectalanguagethrough .

2)PressOK tosave,orESC toquitwithoutsaving.

26

Unitsofmeasurement

Setunitofmeasurementforthevaluesdetectedbythedevice.

Flowrate units of measurement

1)Openinstantrateunitofmeasurementsettingmenu(Setupmenu>Options>Unitsofmeasurem.>Flowrate).Thedisplaywillshowthecurrentsettingbelowtheselecteditem.Press OK toselectflowrateunitofmeasurement.

1)Selectaunitthrough .

2)Press OK tosave,orESC toquitwithoutsaving.

Volume units of measurement

1)Openvolumeunitofmeasurementsettingmenu(Setupmenu>Options>Unitsofmeasurem.>Volume).Thedisplaywillshowthecurrentsettingbelowtheselecteditem.Press OK toselectvolumeunitofmeasurement.

1)Selectaunitthrough .

2)Press OK tosave,orESC toquitwithoutsaving.

27

Pressure units of measurement

Openpressureunitofmeasurementsettingmenu(Setupmenu>Options>Unitsofmeasurem.>Pressure).Thedisplaywillshowthecurrentsettingbelowtheselecteditem.Press OK toselectpressureunitofmeasurement.

1) Selectaunitthrough key.

2) PressOKtosave,orESCtoquitwithoutsaving.

28

Displaycontrast

Setdisplaycontrast.

Opendisplaycontrastmenu(Setupmenu>Options>Displaycontrast).

Thedisplaywillshowthecurrentsettingbelowtheselecteditem.PressOK toedittheselectedmenuitem.

1)Setavaluethrough .Everytimeyoupressit,valuewillincreaseby5%up

to100%.Usekey todecreasevalue

by5%.2)PressOK tosave,orESC toquitwithoutsaving.

29

Alarmtones

Enable/disablethealarmtones.

Openalarmtonesmenu(Setupmenu>Options>Alarmtones).Thedisplaywillshowthecurrentsettingbelowtheselecteditem.PressOK toedittheselectedmenuitem.

1)Setstatusthrough .

2)PressOK tosave,orESC toquitwithoutsaving.

Keytones

Enable/disablekeytones.

1)Openkeytonesmenu(Setupmenu>Options>Keytones).Thedisplaywillshowthecurrentsettingbelowtheselecteditem.PressOK toedittheselectedmenuitem.

1)Setstatusthrough .

2)PressOK tosave,orESC toquitwithoutsaving.

30

Operatingmode

Setrequiredoperatingmode.

Openoperatingmodemenu(Setupmenu>Options>Operatingmode).Thedisplaywillshowthecurrentsettingbelowtheselecteditem.PressOK tochangetheoperatingmode.

1)Selecttherequiredoperatingmode

through .

2)PressOK tosave,orESC toquitwithoutsaving.

WARNING:OnceOKispressed,thepageontwhesidewillbedisplayed.Beforechangingoperatingmode,makesurethatallsensorsareDISCONNECTEDfromthedevice.PressOKtoconfirmchanges.ConnectthesensorsREQUIREDFORTHE SET OPERATING MODE.

31

Setupmanagement

VISIOsettingscanbeloadedfromorsavedonaUSBpendriveinordertoreconfigureit ifrequired,fixproblemsorsetanotherVISIOwithnoneedtorepeatallmanualoperations.Onceinstallationiscompleted,andVISIOoperationhasbeenchecked,werecommendtosaveallsettingsontoaUSBpendrive.TobeabletousethefollowingfunctionsitisnecessarytoinsertaUSBpendriveintherelevantportatthebottomofVISIO.

1)OpenSetupmanagementmenu(Setupmenu>Setupmanagement).

PressOK toedittheselectedmenuitem.

Load setupAllowstoselectaconfigurationfilesavedintheUSBpendriveandtosetVISIOagain.WARNING:ByloadingtheSETUP.BIN filecontainedintheUSBpendriveontotheVISIO,allcurrentsettingswillbelost.

1)Selectthedesiredcontrolthrough key.2)PressOK toconfirmloading,orESC toquitwithoutsaving.

TheSETUP.BINfilecanbeloadedonlyifitissavedintheUSBpendriverootdirectory.Ifsetupdownloadinvolveschangingoperatingmodeandusingdifferentsensorsthantheonesinuse,makesurethatallsensorsareDISCONNECTEDfromthedevice.PressOKtoconfirmloading.Reconnectsensors.

32

Save setupAllowssavingVISIOconfigurationfileontheUSBpendrive:itwillbepossibletoloaditagainanytimethesamesettingsneedtoberetrieved.

1)Selectthedesiredcontrolthrough

key.2)PressOK toconfirmsaving,orESC toquitwithoutsaving.

IfaSETUP.BINfileisalreadypresentintheUSBpendriverootdirectory,thefilewillbeoverwritten.

33

Testmenu

ThismenuallowsusertoviewsomedataandcarryoutanoperationtestofVISIO:-Firmwareversion:thedisplayshowsthefirmwareversioninstalled.-Batteryvoltage:thedisplayshowsthepowervoltageofthedevice.

Display test

Displaytestchecksthedevicedisplaycorrectoperation.

1)Opendisplaytestmenu(Setupmenu>Test>Display).Press OK toperformthetest.

Allpixelsondisplayareturnedon.PressESCtogobacktopreviouspage.

Keys test

Keystestchecksthedevicekeyscorrectoperation.

Openkeystestmenu(Setupmenu>Test>Keys).

Press OK toperformthetest.

1)Pressanykeyandthecorrespondingdisplayareawillturnon.PressESC toquit:assoonasyouacknowledgetheswitch-ononofthecorrespondingareaonthedisplay,devicewillgobacktopreviouspage.

34

Sensors test

Sensorstestcheckscorrectoperationofthesensorsconnectedtothedevice.

Opensensorstestmenu(Setupmenu>Test>Sensors).

Press OK toperformthetest.

Thedisplaywillshowthecurrentsensorreadingbelowtheselecteditem.1)Severalsensorscouldbedisplayed,dependingonthesetoperatingmode.Inthiscase,selectrequiredsensor

through .

2)PressESCtoquit.

35

USE

Startliquidflowinthesystem.Themainpageshowsthedisplaydividedintothreehorizontalparts:-toppart:theprogressbarshowsthetanklevelinpercentage;-centralpart:thevaluerepresentsthevolumeoffluidinsidethetank;-bottompart:thevalueistheinstantworkpressure.

Pressthe key severaltimestoviewavalueinextendedmodeuntilvalueisondisplaycentralpart.

36

MAINTENANCE / DIAGNOSTICS / REPAIRS

•Cleanonlywithasoftwetcloth.•Donotuseaggressivedetergentsorproducts.•Donotcleanequipmentwithdirectwaterjets.

Troubleshooting

FAULT CAUSE REMEDY

VISIOisoffordoesnotswitchon

Nopowersupply Checkpowercableconnections

DeviceisOFF PresstheONkey

VISIOshowswrongdata

Wrongsetup Checkdisplayeddatasetup

Sensorfault ContactthenearestAssistanceCenterVISIOfault

Fillingpump(ifany)doesnotstart

PumpStopModulenotpowered

Checkpowersupplyconnection

END OF LIFE DISPOSAL

Disposeofthesystemincompliancewiththeestablishedlegislationinthecountryofuse.

37

TECHNICAL DATA

Devicetechnicaldata

Description VISIO

Display GraphicLCD,128x64pixels,back-lighting

Powersupplyvoltage 9÷16Vdc

Protectionagainstshort-circuit •

Protectionagainstpolarityinversion •

Max.frequency 1.2KHz

Analoginputs 4÷20mA

Digitaloutput-Maxcurrent 100mA

Maximumpowerinput(withnosensorsconnected) 160mA

Operatingtemperature -20°C÷70°C-4°F÷+158°F

Storagetemperature -30°C÷80°C-22°F÷+176°F

Size 126x79x66mm

Weight 245g

38

Setupmenu

Data Min. Max. Default UoM Notes

Calib. flowmeter Calibration 1 10000 OFF pls/l --

Alarms

Min.pressure 1.0 100.0 OFF bar Alarmcanbedisabledbysettingvalueto"OFF"

Max.pressure 1.0 100.0 OFF bar Alarmcanbedisabledbysettingvalueto"OFF"

Reservetank 1 1000 50 l/min. Alarmcanbedisabledbysettingvalueto"OFF"

Max.level 1 1000 OFF l/min. Alarmcanbedisabledbysettingvalueto"OFF"

Display Contrast 0 100 50 % --

Options

Language - - English -

Availablelanguages:Italiano,English,Español,Português,Français,Deutsch,Cesky,Polski,Русский,Magyar,ﾆﾎﾝ .

Flowrateunitsofmeasurement - - l/min. l/min. Availableunitsofmeasurement:

l/min,GPM,m3/h

Volumeunitsofmeasurement - - l liters Availableunitsofmeasurement:

l,gal,m3

Pressureunitsofmeasurement - - bar bar Availableunitsofmeasurement:

bar,PSI

39

GUARANTEE TERMS

1. ARAGs.r.l.guaranteesthisapparatusforaperiodof360days(1year)fromthedateofsaletotheclientuser(dateofthegoodsdeliverynote).Thecomponentsoftheapparatus,thatintheunappealableopinionofARAGarefaultyduetoanoriginaldefectinthematerialorproductionprocess,willberepairedorreplacedfreeofchargeatthenearestAssistanceCenteroperatingatthemomenttherequestforinterventionismade.Thefollowingcostsareexcluded:

- disassemblyandreassemblyoftheapparatusfromtheoriginalsystem;- transportoftheapparatustotheAssistanceCenter.2. Thefollowingarenotcoveredbytheguarantee:- damagecausedbytransport(scratches,dentsandsimilar);- damageduetoincorrectinstallationortofaultsoriginatingfrominsufficientor

inadequatecharacteristicsoftheelectricalsystem,ortoalterationsresultingfromenvironmental,climaticorotherconditions;

- damageduetotheuseofunsuitablechemicalproducts,forspraying,watering,weedkillingoranyothercroptreatment,thatmaydamagetheapparatus;

- malfunctioningcausedbynegligence,mishandling,lackofknowhow,repairsormodificationscarriedoutbyunauthorizedpersonnel;

- incorrectinstallationandregulation;- damageormalfunctioncausedbythelackofordinarymaintenance,suchascleaning

offilters,nozzles,etc.;- anythingthatcanbeconsideredtobenormalwearandtear.3. Repairingtheapparatuswillbecarriedoutwithintimelimitscompatiblewiththe

organizationalneedsoftheAssistanceCenter.Noguaranteeconditionswillberecognizedforthoseunitsorcomponentsthathavenotbeenpreviouslywashedandcleanedtoremoveresidueoftheproductsused;

4. Repairscarriedoutunderguaranteeareguaranteedforoneyear(360days)fromthereplacementorrepairdate.

5. ARAGwillnotrecognizeanyfurtherexpressedorintendedguarantees,apartfromthoselistedhere.NorepresentativeorretailerisauthorizedtotakeonanyotherresponsibilityrelativetoARAGproducts.Theperiodoftheguaranteesrecognizedbylaw,includingthecommercialguaranteesandallowancesforspecialpurposesarelimited,inlengthoftime,tothevaliditiesgivenhere.InnocasewillARAGrecognizelossofprofits,eitherdirect,indirect,specialorsubsequenttoanydamage.

6. ThepartsreplacedunderguaranteeremainthepropertyofARAG.7. Allsafetyinformationpresentinthesalesdocumentsregardinglimitsinuse,

performanceandproductcharacteristicsmustbetransferredtotheenduserasaresponsibilityofthepurchaser.

8. AnycontroversymustbepresentedtotheReggioEmiliaLawCourt.

CONFORMITY DECLARATION

The declaration of conformity is available at www.aragnet.com, in the relevant section.

42048 RUBIERA (Reggio Emilia) - ITALYVia Palladio, 5/ATel. +39 0522 622011Fax +39 0522 628944www.aragnet.cominfo@aragnet.com

Only use genuine ARAG accessories or spare parts to make sure manufacturer guaranteed safety conditions are maintained in time. Always refer to the internet address www.aragnet.com

D20

287_

GB

-m04

03/2

017