Museum Entrance Religion Room Food Room Writing Room Press for Curator.
Press-Room Pre-Press and Plate-Room Products · 2017. 12. 11. · For perfect printing. 2 Content...
Transcript of Press-Room Pre-Press and Plate-Room Products · 2017. 12. 11. · For perfect printing. 2 Content...
For perfect printing.
Prin
ted
with
Hub
er L
ED-U
V Pr
oduc
ts
Press-Room, Pre-Press and Plate-Room Products
Fountain Solutions
Silicone Emulsions
Washes
WetRoll® Cleaning Cloths
Cleaners and Rejuvenators
Pre-Press and Plate Room Chemicals
Correction Pens and Fluids
Anti Set-Off Powders
Specialities
Service Products
For perfect printing.2
ContentPress-Room, Pre-Press and Plate-Room Products
Hydrolith Fountain Solutions 3, 4Sheetfed Presses Coldset / Newspaper Heatset Offset Fountain Solution Special Additives Silicone Emulsions
Washes and Cleaners 4Conventional Inks Washes for UV Inks and for Mixed Mode Printing Mixed Mode Printing
WetRoll® + DryRoll Cleaning Cloths for Blankets 5WetRoll® Web WetRoll® DryRoll Jumbo Rolls ImpRoll
Cleaners and Rejuvenators 6For Rollers For Blankets and Cylinders Ink Strippers Anilox Roller and Coating Cleaners Flexo Printing Products – Cleaners and Washes
Plate Room Chemicals 7Plate Developers Plate Wash + Gums Plate Gums Plate Cleaners Repro and Film Chemicals
Correction Pens and Fluids 8Correction Pens Deletion Fluids
Anti-Set-Off Powders 8Fluid H1 / 2 / 3 uncoated Fluid HC-10 / -20 / -30 coated
Digital Press Products 9Gliding / Slip and Antistatic Additives Special Cleaners
Miscellaneous Printing Aids 9Ink Additives Specialties
Hand Care and Cleaners Products 10Paste Emulsion Skin Care and Protection Creme
Service Products 10
Our Company 11
PagePage
For perfect printing.3
Hydrolith Fountain SolutionsFor large, medium and small size offset printing
Sheetfed Presses
Strong formulations
Hydrolith BS-TWith strong and effective pH-buffer, stable ink and water balance, a reduction of isopropyl alcohol is possible, universal use, fast roll-up of the plate.20 l / 200 l
Hydrolith BS-LIConsiderable reduction of alcohol down to 3-6% is possible, stable ink and water balance, fast roll up of the plate.20 l / 200 l
Hydrolith BS-ZXFor alcohol-free offset printing, universal use, with high pro-portion of alcohol replacement additives, stable ink and water balance, fast roll up of the plate.20 l / 200 l
Hydrolith BS-LXFor alcohol-free offset printing for LED-UV, with high proportion of alcohol replacement additives, stable ink and water balance, fast roll up of the plate.20 l / 200 l
Hydrolith BS-SLUniversal Fountain Solution, proven and stable in the production process, fast roll up of the plate.20 l / 200 l
Gentle formulations
Hydrolith BSUniversal Fountain Solution, with a strong and effective pH-buffer. Allows rapid ‘roll-up’ of the plates, inhibits corrosion and prevents calcium build up. Reduction of isopropyl alcohol is possible, with Fogra Certificate.20 l / 200 l
Hydrolith BS-LAHigh performance Fountain Solution for medium to large and modern, fast running presses, considerable reduction of alcohol down to 3-6% is possible, with Fogra Certificate.20 l / 200 l
Hydrolith BS-NAFor alcohol-free offset printing, with an appropriate press configuration and setting elimination of IPA is possible.20 l / 200 l
Hydrolith BS-NXFor alcohol-free offset printing, with high proportion of alcohol replacement additives, with Fogra Certificate.20 l / 200 l
Coldset / Newspaper
Hydrolith ZR – StandardFountain Solution allows fast roll up of the plate, low water levelling, prevents calcium build up, strong buffer, good plate protection, corrosion inhibited.20 l / 200 l / 1.000 l
Hydrolith ZR-DZHigh performance Fountain Solution with gentle buffer, with Fogra Certificate.20 l / 200 l / 1.000 l
Hydrolith ZR-AFast roll up and efficient cleaning performance.
20 l / 200 l / 1.000 l
Heatset Offset
Hydrolith HSStandard Fountain Solution with strong pH-buffer, good plate protection, allows alcohol reduction, corrosion inhibited, universal use on all dampening systems.20 l / 200 l / 1.000 l
Hydrolith HS-NAFor alcohol-free and alcohol-reduced printing, other per-formances as Hydrolith-HS, with Fogra Certificate.20 l / 200 l / 1.000 l
Hydrolith HS-NXOne step fount with strong proportion of alcohol replacement additives – other performances as Hydrolith-HS.20 l / 200 l / 1.000 l
Fountain Solution Special Additives
ARA IIIAlcohol replacement additive for the ready to use fountain solution, eliminates use of IPA or reduces down to 1-3%, variable dosage 1-3%.10 l / 20 l
APA Anti-Piling AdditiveReduces piling on blankets considerably, dosage adding to the ready to use fount 1-3%.10 l / 20 l
IPA CombiHighly effective IPA and alcohol replacement additive combination, remarkable reduction of the consumption down to 3-8% possible.20 l / 200 l
Dampening System Cleaner DSCConcentrate for cleaning the fountain solution circulation from fungus, sludge and ink residues.10 l / 20 l Continue page 4
For perfect printing.4
Conventional Inks
B-Matic Wash AIIIWash for Automatic Blanket and Roller Cleaning Systems, water miscible, flash point above 60°C, with Fogra Certificate for Heidelberger, manroland, Koebau, Baldwin Blanket Cleaning Systems.20 l / 200 l / 1.000 l
B-60 WashWash with an excellent emulsifying capability, for Automatic Blanket and Roller Cleaning Systems and manual cleaning, water miscible, flash point above 60°C, with Fogra Certificate.20 l / 200 l / 1.000 l
B-60-S WashWith increased solvency power and excellent emulsifying capabi-lity, recommended for Brush Automatic Blanket Cleaning Systems and manual cleaning, water miscible, flash point above 60°C.20 l / 200 l / 1.000 l
B-Matic Wash 100Wash for Automatic Blanket and Roller Cleaning Systems, clas-sified as Non Voc Wash, water miscible, flash point above 100°C, with Fogra Certificate.20 l / 200 l / 1.000 l
HPL-WashPremium wash with a strong cleaning power, cleans thoroughly, very economical: water miscible up to 30% for one step removal of ink and water soluble residues.10 l / 20 l / 200 l
GTS-WashPremium wash with an excellent cleaning power, cleans thoroughly, very economical: water miscible up to 1:1 for one step removal of ink and water soluble residues.10 l / 20 l / 200 l
Web Wash 100Special formulated wash for web presses, also recommended for heatset presses, high flash point (above 100°C), removes effec-tively piling on blankets, with Fogra Certificate.20 l / 200 l / 1.000 l
Web Wash Z-1Manual wash for web presses, with solvency power enhancer, high flash point above 60°C, removes effectively piling on blankets.20 l / 200 l / 1.000 l
Washes for UV Inks and for Mixed Mode Printing
UV-Wash 60 medium fast evaporation, with Fogra Certificate.
UV-Wash 80 moderate fast evaporation, with Fogra Certificate.
UV-Wash 100 VOC-free – slow evaporation.High solvency power, for UV ink rollers and UV blankets (EPDM).20 l / 200 l
UV-Wash DB15With strong solvency power for UV blankets and UV rollers, economical and international proven, for manual and automatic cleaning – medium fast evaporation.20 l / 200 l
Mixed Mode Printing
Combi Solv 60For cleaning UV and conventional inks (mixed mode) – medium fast evaporation.20 l / 200 l
Hybrid WashFor cleaning UV and conventional inks (mixed mode) – strong solvency power20 l / 200 l
Washes and CleanersFor cleaning and maintaining your printing press
Hydrolith Fountain SolutionsFor large, medium and small size offset printing
Aquadura ROWater hardener for RO water and very soft water.20 l / 200 l
Calcium Blocker IIICalcium Chelating Agent for Fountain Solution Concentrates1 l / 10 l
OK / COM Drying StimulatorAccelerates and assists drying of the ink.10 l
Silicone Emulsions
Standard EmulsionsS 20 A | S 35 A | S 60 AStable emulsion with strong antistatic additives, contains corrosion inhibitors. Prevents smearing on the folding devices.20 l / 200 l / 1.000 l
Special Emulsions for jobs with a higher ink coverageSE 20 AG | SE 35 AG | SE 60 AGWith additional wax additives, provides higher rub resistance and gloss levels of the ink.20 l / 200 l / 1.000 l
WetRoll® + DryRoll Cleaning Cloths for BlanketsFor automatic blanket cleaning
WetRoll®
Pre-impregnated Cleaning Cloths for automatic blanket cleaning. Best cleaning performance and at the same time low wastage, high absorbency for ink, water and paper dust, VOC-free and economical. Proven and worldwide in use.For all popular press models, sheetfed and web presses.
WetRoll®-UVSpecially for UV and LED-UV printing, performance as WetRoll® standard.
Web WetRoll®
For web presses – Coldset + Heatset, sizes and impregnation adapted to the particular demand.
DryRollCleaning cloth rolls for automatic blanket cleaning.Excellent absorbance capability for inks, solvents, dust and water. Even, smooth and soft surface for effective and gentle cleaning, lint-free surface – no disturbing residues left.For all popular presses.
Jumbo Rolls500 meter – all popular sizes, proven quality as DryRoll
ImpRollPre-impregnated or dry cleaning cloths for automatic impression cylinder cleaning. Best cleaning performance and VOC-free.For all popular press models, sheetfed and web presses.
For perfect printing.5
· VOC-free solvents – no pollution of the working area
· Much less solvent consumption – up to 80% lower!
· Easy to handle, safe and economical
· Customer specific adaption as an option
Why WetRoll®!?
For perfect printing.6
For Rollers
Rollo Vital Paste Rollo Vital GEL Rollo Vital GEL-Plus (for UV inks) Rollo Vital liquid
For use on ink rollers, gently and thoroughly removes stubborn residues of glaze, ink and paper, revitalizes the rubber for better ink splitting. Recommended for quick colour change.700 ml can / 500 ml tube / 1 l bottle
ASR Calcium Remover GEL / liquidEffective calcium remover – thoroughly, gently and quickly removes calcium residues from the rollers caused by hard water, paper and inks.500 ml tube / 1 l bottle
DAI 95 WashCleans thoroughly and conditions the alcohol dampening rollers and returns to the rollers their original water transfer capability, no greasy residues are left, medium quick evaporation.10 l / 20 l / 200 l
MRC 66 CleanerCleans thoroughly and conditions the alcohol dampening rollers and returns to the rollers their original water transfer capability, no greasy residues are left, very fast evaporation.10 l / 20 l / 200 l
WSP Paste conventional rollers WSP-UV Paste for EPDM rollers
Roller lubrication Gel for ink rollers not in use, prevents abrasion of the rollers.500 g can
CRC Cleaner and ConditionerCleans thoroughly and conditions the chrome roller surface and returns to the rollers their original water transfer capability, no greasy residues are left1 l
For Blankets and Cylinders
Gummi Fit standard Gummi Fit Xtra strong and effective Gummi Fit Plus very fast evaporation
Rejuvenators for rubber blankets to remove stubborn glaze.1 l / 10 l / 200 l
CR 100 Cylinder PasteCleans and maintains chrome surfaces like on plate, impression and blanket cylinders, makes the chrome surface ink and water repelling again.150 ml tube
Ink Strippers
Very strong Ink Strippers, remove and clean thoroughly ink residues from press frames, rollers ends, ink trays, etc.
Ink Stripper GRStrong solvency power, medium fast evaporation.
Ink Stripper GR plusVery high solvency power, fast evaporation.
Ink Stripper HGR UltraHigh solvency power, very fast evaporation.1 l / 10 l / 200 l
Anilox Roller and Coating Cleaners
Anilox Cleaner GEL-DL2Effective cleaner for Anilox Rollers. Removes thoroughly, gently and quickly residues from water based varnishes, also for flexo printing, can be used on press.500 ml tube
Anilox Cleaner UltraStrong Cleaner for Anilox Rollers– removes thoroughly, gently and quickly residues from water based varnishes, also for flexo printing, recommended for use outside the press.1 l bottle
DVD 100 Coating CleanerRemoves dried residues of water based varnishes (dispersion varnish) from Anilox rollers, varnishing plates, also recommen-ded for use in Anilox Roller cleaning machines.10 l
DVD Flash Coating CleanerRemoves dried residues of water based varnishes from Anilox rollers and varnishing circulations.10 l
Flexo Printing Products – Cleaners and Washes
Flexo Kleen FS 3For cleaning Anilox rollers and ductor rollers from solvent based Flexo inks.1 l / 200 l
Flexo Kleen FW 8For cleaning Anilox rollers and ductor rollers from water based Flexo inks.1 l / 200 l
Flexo Kleen PC 9Intensive parts cleaner, no hazardous classification, recommended for parts washing machines.1 l / 200 l
Cleaners and RejuvenatorsFor cleaning/maintaining your printing press
For perfect printing.7
Plate Room ChemicalsEverything concerning plates and films
Plate Developers
A. CTP-Thermal PlatesHigh performance developers with effective plate coating protection and strong buffer.
CTP-Smax / CTP-Kmax / CTP-Hmax / CTP-FmaxFor CTP Thermal Plates of Agfa, KPG, Fuji, Ipagsa, IBF, Huaguang, Strong Plates, Top High, Vela, East Plates.Please ask for overview chart ‘which developer for which plate’.20 l
Replenisher CTP-max Developers.
CTP-Smax-R / CTP-Kmax-R / CTP-Hmax-RHigh Performance Developer with effective coating protection and very strong buffer for extreme long developer stability:
CTP-ECOmax / CTP-ECOmax-R
B. CTCP Positive PlatesHigh performance developer for CTCP positive plates with effec-tive plate coating protection and strong buffer:
CTCP-M / CTCP-HM2 / CTCP-MM2 / CTCP-F1
C. CTP Photopolymer/Violet PlatesHigh performance developer for CTP negative plates (photo-polymer). High stability and minimized sludge build up.
For Agfa N91V, Fuji LPNV, KPG Violet News Gold, Huaguang PPVS4:
CTP-DVS + CTP-DVS-R / CTP-NPK + CTP-NPK-R20 l
D. Analogue conventional Positive PlatesHigh stability, even developing. No calcification or sludge formation.
MMK – ready to use / MMK Concentrate 1:9 HK 20-F / Replenisher R plusFor developing conventional plates of Agfa, KPG, Fuji, Ipagsa, IBF.10 l / 20 l
E. Analogue conventional Negative Plates + CTCP Plates negative working
NAB 1Long lasting and universal in use, no residues in the plate pro-cessor. IBF Negfast, Agfa Aluva N, N555.20 l
Plate Wash + Gums
PG 500 for low-process plates, i.e. Agfa Azura
PG 600 for low-process plates, i.e. Agfa Amigo
PG 700 for process-less plates, i.e. Kodak Sonora
PG 800 for low-process Violet Negative Plates20 l
Plate Gums
Gum MS-M / Gum MS-MP / Gum MSShort and long term gumming of all common metal plates. Good
protection of oxide surface, easily removable with water.
20 l
NEWS Gum 8.11Short term gumming, very easy removable with water plus sufficient protection of the oxide surface.20 l
Baking Gum EG12 / EG15Very effective protection of the oxide surface. Easily re movable with water. EG15 with additional plate gum for one-step gumming.10 l
Plate CleanersFor cleaning, conditioning and activation of the printing plates
Plate Cleaner CTPVery gentle formulation. Cleans and conditions. Recommended for Thermal Plates.
Plate Cleaner PR plusVery intensive. Removes scum, background toning, ink residues, oxidation and slight scratches.
Plate Cleaner K3Very intensive. White colour. Removes scum, background toning, ink residues, oxidation and slight scratches.
Plate Cleaner SCVery soft cleaner. Removes ink and activates background of the plate
1 l
Repro and Film Chemicals
Rapid Access Film Developer LH 100A 1:3 concentrate for all line and hard dot films giving high stability and high density.10 l
Rapid Film Fixer GAFor all line and hard dot films. A 1:3 to 1:4 concentrate with high stability and low odour.10 l
Film Cleaner ‘Diamant’Highly refined destillate with long term antistatic agent, for cleaning and antistatic conditioning of films, foils, etc., thoroughly removes dirt, dust and grease without streaking.1 l / 10 l
Glass Cleaner A aerosol / M liquidRises considerably the density of the toner on laser films foils, easy application: spray onto the foil and let dry.400 ml aerosol / 10 l
High Density Spray LF-A aerosol / LF-M liquidRises considerably the density of the toner on laser films foils, easy application: spray onto the foil and let dry.400 ml aerosol, LF-M 1 l, LF-B 1 l
For perfect printing.8
Correction Pens and FluidsEverything concerning plates and films
Correction Pens
For the correction / deletion of analogue (conventional) positive and CTP Thermal Plates, works gently but thoroughly with no attack of the oxide surface. Does not dry out.
CIP 1 Fine CIP 2 Medium CIP 3 Broad pen point Jumbo CIP extra broad pen point (ca. 1.4 cm)
For the correction / deletion of conventional negative working platesCIN-m Medium CIN-b Broad pen point
For the correction/deletion of CTP Photopolymer Plates/Violet Plates (negative working), Violet Plates from Agfa, Fuji, Kodak, IBF, etc.
CIF-m Medium CIF-b Broad pen point
For correction / deletion of Thermal Direct PlatesCIK-m Medium CIK-b Broad pen point
For correction / deletion of Silver Plates and Silvermaster Plates, i.e. AgfaLithostar, Supermaster, Digiplate
KIS-m Medium KIS-b Broad pen point
For the addition / correction on positive and negative working platesPlus Correction Pen 1 Fine Plus Correction Pen 2 Medium Plus Correction Pen 3 Broad pen point
Deletion Fluids
For the deletion on positive platesCorrection Agent MA paste for precise, easy and effective application. No bleeding effect.100 ml / 250 mlCorrection Agent MP-SA higher strength paste for problem areas.100 ml
Organic based powder, no abrasive effect, no gloss reduction of the ink. Overprint varnishing is possible.
UNCOATED – for all printing jobs – universal in use.Fluid H 1 fine grade for light weight paper Fluid H 2 medium grade for paper and light weight carton Fluid H 3 coarse grade for carton1 kg pouches / 1 kg bottle / 6 kg bucket
COATED – with enhanced flowing properties, water repellent.Fluid HC-10 fine grade for light weight paper Fluid HC-20 medium grade for paper and light weight carton Fluid HC-30 coarse grade for carton2 kg pouches / 1 kg bottle / 6 kg bucket
Anti Set-Off PowdersFor higher value and haptic
For perfect printing.9
Ink Additives
Antiskin A Antiskin M
Prevents skinning of printing inks on ink rollers, ink trays, and ink cans.400 ml aerosol / 1 l bottle
FD Ink ReducerReduces the tack of the printing in, no effect on the gloss or other performances of the ink.600 g / can
Ink Drier MCOStimulates total drying of the ink considerably – contains cobalt.500 g / can
Specialties
ASR Cleaner and DecalcifierThoroughly and gently cleans offset plate processors, regular use is recommended.10 l
Silicone SpraySpecially formulated for the Graphic Arts Industry. It provides a gliding, antistatic, anti-corrosive and even protective layer on paper cutting knives, paper punching and drilling equipment.400 ml aerosol
Antistatic Spray A aerosol Antistatic Spray M with manual spray
Eliminates static charge build up in paper deliveries.400 ml aerosol / 1 l
HDC Anti FoamConcentrate for eliminating foam in fountain solution circulations.1 l
Antizid Algae-StoppConcentrate for eliminating algae, fungus and bacteria growth.1 l
FliFF Surface CleanerCleaning and preparation of foils, glass and other smooth surfaces, antistatic conditioned and free of streaks.1 l + spray head
HUB-Tex wet + dryWash cloth rolls – impregnated with washing agent or dry1 l
GluSolv Orange Adhesive RemoverDissolves and removes dispersion-, acrylate-, rubber- and silicone-adhesives1 l
Miscellaneous Printing AidsFor special requirements
Gliding/Slip and Antistatic Additives
For rewetting
DIGI Glide 1.0 standard solution DIGI Glide 2.0 with increased and long term antistatic performance
10 l
Special Cleaners
For ink jet heads, press parts
DIGI Cleaner 1.0 VOC-free DIGI Cleaner 2.0 flash point >28°C DIGI Cleaner 3.0 fast evaporating
1 l
Digital Press Products
For perfect printing.10
Service ProductsIn addition to Huber Production Items
Huber Fount Filter FFFor fountain solution filtration – different sizes for Technotrans: 450 x 350 mm, 230 x 230 mm.
Protection Gloves – with CertificateNitril, with velour inside.Sizes: 8 medium (M) 9 large (L) 10 extra large (XL)
Ink SpatulasPlastic material, black, magenta, cyan, yellow.
SpongesFormat: 12 x 8 x 3,5 cm.
Wash-up bottles1 liter, with swan neck.
pH Value GaugesRange pH 4,0 - 7,0
Water Hardness GaugesFor quick control of the tap water hardness
Spray headsFor 1 liter bottles, solvent resistant
Dispensing valvesFor cans and drums.
Hand Care and Cleaners ProductsGentle and effective for Printers’ Hands
LACITT Hand Cleaner Paste LACITT-E Hand Cleaner Emulsion
Cleans printers hands thoroughly, quick, gentle to skin.500 ml / 2,5 l / 10 l bucket
MONO-DERMIN Skin Care and Protection CremePrevents drying of the skin and protects from aggressive substances.100 ml tube
For perfect printing.11
Our CompanyMore than 40 years of experience in printing technology and chemistry
Our plant in Troisdorf – between Cologne and Bonn – is in easy reach of all major industrial centres in Europe.
We can swiftly react to your demands, however great, small or exceptional they may be.
With more than 40 years of ex perience in the printing technology and chemistry on our side, we would be delighted to provide you with further information and support.
In our laboratory we continuously develop new products and develop further on the existing product range. The quality control of the production is also located here.
We look forward to hearing from you!
Our company is certificated DIN EN ISO 9001.
As a
t GB.
05.1
6
For perfect printing.
Huber GmbHJunkersring 15 · 53844 Troisdorf · Germany
Phone: +49(0) 22 41 / 2 34 99-0 Fax: +49(0) 22 41 / 2 34 99-10
Internet: www.Huber-Graphics.com E-mail: [email protected]