Presented to: By: Date: Federal Aviation Administration Construction Safety Phasing Plans and Part...
-
Upload
timothy-anthony -
Category
Documents
-
view
216 -
download
0
Transcript of Presented to: By: Date: Federal Aviation Administration Construction Safety Phasing Plans and Part...
Presented to:
By:
Date:
Federal AviationAdministrationConstruction Safety
Phasing Plans and Part 139
Airports Conference – Hershey, PA
Evelyn Martinez, Lead Inspector
March 2, 2011
2Federal AviationAdministration
Eastern Region Airports Conference March 2, 2011
2
ObjectiveTo Ensure Compliance with 14 CFR Part 139
3Federal AviationAdministration
Eastern Region Airports Conference March 2, 2011
3
FAA Review Process
Airport SponsorAirport Sponsor
Project Manager ReviewProject Manager Review
AEA-620 AEA-620 ReviewReview
(Part 139 (Part 139 Inspector)Inspector)
Line of Line of Business Business ReviewReview
Project Manager Final Project Manager Final ReviewReview
FAA Objectio
n
Complete/
Acceptable
7460 process
FAA Respons
e
Notice to
Proceed
Issued
4Federal AviationAdministration
Eastern Region Airports Conference March 2, 2011
4
Why is a Construction Safety Plan required?
The Construction Safety Plan is written to meet the requirements of:
• A/C 150/5370-2E, Operational Safety on Airports during Construction.
• FAR Part 139, §139.341, Identifying, Marking, and Lighting Construction and Unserviceable Areas.
5Federal AviationAdministration
Eastern Region Airports Conference March 2, 2011
5
Who needs a Construction Safety Plan?
Per AC 150/5370-2e:• Airports certificated under 14 CFR Part 139
• Airports using AIP grant funds; and
• Airport projects using Passenger Facility Charge (PFC) program
6Federal AviationAdministration
Eastern Region Airports Conference March 2, 2011
6
Construction Safety Phasing Plans and Part 139
Key Point
The primary focus of the Construction
Safety Plan is Airport Operations,
not the construction itself.
7Federal AviationAdministration
Eastern Region Airports Conference March 2, 2011
7
What is a Construction Safety Plan?
A Construction Safety Plan is NOT:
• An OSHA Safety Plan (29 CFR 1926)
• The Project Plans and Specifications
• Description of proposed or finished work (i.e. Sign & Marking Plan)
8Federal AviationAdministration
Eastern Region Airports Conference March 2, 2011
8
Construction Safety Phasing Plans and Part 139
• Inspectors may participate in Pre-design/Pre-construction Conferences when a construction project is complex or there is significant work that might impact compliance with Part 139.
• Inspectors review submitted CSPPs during project design phase.
• Final Inspection of Completed Projects. – Upon completion of a construction project involving complex or
significant work, the Inspector, may accompany the FAA project engineer/manager to assure compliance with Part 139 requirements.
9Federal AviationAdministration
Eastern Region Airports Conference March 2, 2011
9
Construction Safety Phasing Plans and Part 139
• Surveillance Inspections– announced or unannounced conducted in addition to
the periodic inspection.• monitoring airfield safety during construction activity
10Federal AviationAdministration
Eastern Region Airports Conference March 2, 2011
10
Construction Safety Phasing Plans and Part 139
139.309, Safety Areas • Occasionally, FAA contract construction crews have
compromised the integrity of the runway/taxiway safety areas by creating ruts or leaving construction equipment or material there.
• Airport must notify the FAA local Technical Operations Office to repair the damage.
11Federal AviationAdministration
Eastern Region Airports Conference March 2, 2011
11
Construction Safety Phasing Plans and Part 139
139.311, Marking, signs, and lighting• Ensure that temporary marking and lighting of areas
servicing air carrier aircraft meet standards required by Section 139.311.
• Reminder: Reference 150/5210-22, Airport Certification Manual – Submit signage and marking changes to Dennis O’Donnell no
later than the 90% design stage and prior to bidding of project
12Federal AviationAdministration
Eastern Region Airports Conference March 2, 2011
12
Construction Safety Phasing Plans and Part 139
139.333, Protections of NAVAIDs
• Procedures must be established to prevent the construction of facilities on the airport that would derogate the operation of both electronic and visual NAVAIDs or the air traffic control facilities on the airport. Coordinate with FAA Tech Ops.
• Such procedures are intended to prevent activities associated with construction and/or maintenance from shutting down, interrupting, or altering NAVAID signals.
– CSPP should address vehicle parking location, equipment and material storage locations near NAVAIDs.
13Federal AviationAdministration
Eastern Region Airports Conference March 2, 2011
13
Construction Safety Phasing Plans and Part 139
139.329 Pedestrians and ground vehicles
AC 150/5210-20, Change 1, Ground Vehicle Operations on Airports
• Page 3, para 8 states in part that the airport operator should give special consideration to training temporary operators, such as construction workers, even if escort service is being provided.
• Page 4, para 11 provides guidance for non-routine operations such as airside construction and states that planning meetings associated with such activities offer an opportunity to revise driving rules and regulation, communications and procedures, and air traffic control procedures as well as other important operations issues.
14Federal AviationAdministration
Eastern Region Airports Conference March 2, 2011
14
Construction Safety Phasing Plans and Part 139
139.329 Pedestrians and ground vehicles cont’d
AC 150/5370-2E
• Page 3, para 2-2 l. includes vehicle identification to help track the number of vehicles at a construction site during any time.
• Page 5, para 2-4 includes vehicle and pedestrian access routes for airport construction projects must be controlled to prevent inadvertent or unauthorized entry of persons, vehicles, or animals onto the AOA. This includes aircraft movement and non-movement areas.
• The airport operator should develop and coordinate a construction vehicle plan with airport tenants, contractors, and the ATCT. The safety plan should include specific vehicle and pedestrian requirements.
– Ground Vehicle Operations Training Manual (approved in ACM)
15Federal AviationAdministration
Eastern Region Airports Conference March 2, 2011
15
Construction Safety Phasing Plans and Part 139
139.341, Identifying, Marking, and Reporting Construction and Other Unserviceable Areas
• The certificate holder is responsible for establishing procedures, such as the review of plans, to protect utilities, cables, wires, pipelines, and other underground facilities prior to construction activities. Must follow AC 150/5370-2, Operational Safety on Airports During Construction.
• Mark and, if appropriate light in a manner authorized (AC guidance):– Each construction area and unserviceable area that is on or adjacent to any
movement area or any other area of the airport on which air carrier aircraft operate.
– Each item of construction equipment and each construction roadway that might affect the safe movement of aircraft on the airport.
– Any area adjacent to a NAVAID that, if traversed, could cause derogation of the signal or failure of the NAVAID.
– The certificate holder must have procedures in place to repair any damage that occurs to an existing utility.
16Federal AviationAdministration
Eastern Region Airports Conference March 2, 2011
16
Construction Safety Phasing Plans and Part 139
139.341, Identifying, Marking, and Reporting Construction and Other Unserviceable Areas cont’d
AC 150/5370-2E• Page 1, para 1-2 b.(6) the restriction of construction vehicles to
construction areas by flagging and barricading, erecting temporary fencing, or providing escorts, as appropriate.
17Federal AviationAdministration
Eastern Region Airports Conference March 2, 2011
17
Construction Safety Phasing Plans and Part 139
• 139.321 Handling and storing of hazardous substances and materials (HAZMAT)
• 139.325 Airport Emergency Plan (routes)• 139.327 Self-Inspection program (daily)• 139.337 Wildlife hazard management
(attractants)• 139.339 Airport Condition Reporting
(NOTAMs)
18Federal AviationAdministration
Eastern Region Airports Conference March 2, 2011
18
19Federal AviationAdministration
Eastern Region Airports Conference March 2, 2011
19
Construction Safety PlanNarrative
•Very beginning…project description.
•Each narrative section should, to the extent practical, focus on the specific subject exclusively.
•Be specific.
•Reference related sections, by section number and name, as required.
•Reference attachments as required.
•Avoid duplicate responses.
20Federal AviationAdministration
Eastern Region Airports Conference March 2, 2011
20
Responsibilities
Everyone Plays a Part!
• Airport Sponsor• Contractors• Tenants• FAA
21Federal AviationAdministration
Eastern Region Airports Conference March 2, 2011
21
Construction Safety PlanReference Attachments
•All material referenced in the narrative MUST be attached to the Construction Safety Plan.
•Excerpts from Advisory Circulars or other publications may be attached.
•Avoid attaching entire Advisory Circulars or other unrelated published material.
•Graphics such as diagrams, photographs, sketches, or drawings should be included.
22Federal AviationAdministration
Eastern Region Airports Conference March 2, 2011
22
Construction Safety PlanReference Attachments
•Drawings specific to Operational Safety during Drawings specific to Operational Safety during construction – by phase – construction – by phase –
23Federal AviationAdministration
Eastern Region Airports Conference March 2, 2011
23
Construction Safety Phasing Plans and Part 139
During Movement area Inspection FAA Inspector will confirm:
If construction activity is in progress:– Check for adherence to the CSPP – Identify any potentially hazardous condition to runway/taxiway safety posed by
excavations, trenches, or stockpiled material– Verify there is adequate marking and lighting of the construction area– Verify correct marking and lighting of temporary thresholds– Verify the placement of construction equipment away from the movement area
Observe ground vehicle operations for the following:– Limited access to movement and safety areas to only those vehicles necessary
for airport operations– Appropriate and correct procedures and communications, adherence to
pilot/controller phraseology, and driver understanding of Air Traffic Control conventions
– Properly marked vehicles
24Federal AviationAdministration
Eastern Region Airports Conference March 2, 2011
24
Construction Safety PlanGuidance/Reference Material
Advisory Circulars:• 150/5370-2E Operational Safety on Airports During
Construction• 150/5200-28 NOTAMS for Airport Operators• 150/5210-20 Ground Vehicle Operations on Airports• 150/5300-13 Airport Design• 150/5340-1 Standards for Airport Markings• 150/5340-18 Standards for Airport Sign Systems• 150/5340-30 Design and Installation Details for
Airport Visual Aids
25Federal AviationAdministration
Eastern Region Airports Conference March 2, 2011
http://www.faa.gov/airports/eastern/airport_safety/cert_bulletins
25
26Federal AviationAdministration
Eastern Region Airports Conference March 2, 2011
Questions?
26