presentation for electrical engineering in ntpc

download presentation for electrical engineering in ntpc

of 18

Transcript of presentation for electrical engineering in ntpc

  • 8/22/2019 presentation for electrical engineering in ntpc

    1/18

    Summer Training

    A

    PresentationOn

    www.powerpointpresentationon.blogspot.com

    At

    NTPC

    BADARPUR

    http://www.powerpointpresentationon.blogspot.com/http://www.powerpointpresentationon.blogspot.com/http://www.powerpointpresentationon.blogspot.com/
  • 8/22/2019 presentation for electrical engineering in ntpc

    2/18

    ABOUT NTPC

    NTPC has installed capacity of 29,394 MW.15 coal based power stations (23,395 MW)

    7 gas based power stations (3,955 MW)4 power stations in Joint Ventures (1,794 MW).The company has power generating facilities in all major

    regions of the country.

    NTPC, was setup in 1975 worlds largest .In Forbes list of Worlds 2000 Largest Companies for the

    year 2007, NTPC occupies 411th place.

    http://www.ntpc.co.in/cms/index.php?page=Installed-Capacityhttp://www.ntpc.co.in/cms/index.php?page=Installed-Capacity
  • 8/22/2019 presentation for electrical engineering in ntpc

    3/18

    NTPC BADARPUR PLANT DETAILS

    First Unit Commissioned 1973 (95MW)Installed Capacity 720 MW

    Derated Capacity 705 MWCoal Source Jharia Coal FieldsWater Source Agra Canal

    Unit Sizes 3X95 MW ,2X210MWTransfer of BTPS 01.06.2006 throughto NTPC GOIs Gazette Notification

  • 8/22/2019 presentation for electrical engineering in ntpc

    4/18

    OPERATION

  • 8/22/2019 presentation for electrical engineering in ntpc

    5/18

    CONTROL AND INSTRUMENTATION

    LAB

    MANOMETRY LABPYROMETRY LAB

    AUTOMATIC CONTROL SYSTEMS LABPROTECTION & INTERLOCKING LABFURNACE SAFEGAURD SUPERVISORY SYSTEM

    LAB

  • 8/22/2019 presentation for electrical engineering in ntpc

    6/18

    MANOMETRY LAB

    This Lab. Consists of :

    Sensor

    IndicatorScale/Recorder

  • 8/22/2019 presentation for electrical engineering in ntpc

    7/18

    Bourdon Tube

  • 8/22/2019 presentation for electrical engineering in ntpc

    8/18

    Manometer

    It is a pressuremeasuringinstrument, usually limited

    to measuring pressures

    near to atmospheric.

    The term manometerisoften used to refer

    specifically to liquid column

    hydrostatic instruments.

    http://en.wikipedia.org/wiki/Pressurehttp://en.wikipedia.org/wiki/Measuring_instrumenthttp://en.wikipedia.org/wiki/Measuring_instrumenthttp://en.wikipedia.org/wiki/Measuring_instrumenthttp://en.wikipedia.org/wiki/Measuring_instrumenthttp://en.wikipedia.org/wiki/Pressure
  • 8/22/2019 presentation for electrical engineering in ntpc

    9/18

    PYROMETRY LAB

    This lab deals with the instruments related totemperature measurement like:

    Thermocouple

    Resistance Temperature Detector (RTD)

  • 8/22/2019 presentation for electrical engineering in ntpc

    10/18

    Thermocouple

    Used for themeasurement of high

    temperature with a dual

    element made of

    Aluminum 16 Gauge.

  • 8/22/2019 presentation for electrical engineering in ntpc

    11/18

    RTD Resistance Temperature

    Detectorused as a primary sensing elementoperates on this principle of changes in electrical

    resistance

    Temperature Range:183C 540CElement Resistance at 0C : 100 ohm

    Accuracy:+/- 0.5

  • 8/22/2019 presentation for electrical engineering in ntpc

    12/18

    AUTOMATIC CONTROL SYSTEM

    LAB

    Deals in automating the equipments and feedingroutes.

    Provides safe operation under all plant disturbancesand component failures.Requires 24 Volt DC, 4-20 mA to excite all the

    controls.System installed in BTPS is OLD RUSSIAN

    SYSTEMS.

    These are ACS (Automated Control System) which

  • 8/22/2019 presentation for electrical engineering in ntpc

    13/18

    PROTECTION &

    INTERLOCKING LAB

    Interlocking : It is basically inter-connecting two ormore equipments so that if one fails other can perform

    the task.

    Main Equipments of this lab:oRelays

    oFusesoCircuit Breakers

  • 8/22/2019 presentation for electrical engineering in ntpc

    14/18

    Relays

    It is a protective device.It can detect wrong condition in electrical circuits by

    constantly measuring the electrical quantities flowingunder normal and faulty conditions.

    Types:oCurrent Relay

    oPotential Relay

  • 8/22/2019 presentation for electrical engineering in ntpc

    15/18

    Fuses

    It is a sheet piece of metal.It melts if a heavy current flows through it and

    breaks the circuit.Usually silver is used as a fuse material.Types:o

    Semi Enclosed Rewire able FuseoH.R.C Cartridge Fuse

    oMiniature Current breakers

  • 8/22/2019 presentation for electrical engineering in ntpc

    16/18

    FURNACE SAFEGUARD

    SUPERVISORY SYSTEM

    In this lab, fuel firing system is monitored in thefurnace.

    Oil is sprayed first for firing of coal in furnace soLight Diesel Oil (LDO) is used for ignition.The rate of oil flow is 6000 L/hr before firing.

  • 8/22/2019 presentation for electrical engineering in ntpc

    17/18

    THANK YOU

  • 8/22/2019 presentation for electrical engineering in ntpc

    18/18

    QUERIES ?