Preface xxi xxii - Cisco...Processes Overview 1-6 IOS as a Process 1-7 Dual IOS Processes 1-8 File...
Transcript of Preface xxi xxii - Cisco...Processes Overview 1-6 IOS as a Process 1-7 Dual IOS Processes 1-8 File...
iiiBook Title
78-xxxxx-xx
C O N T E N T S
Preface xxi
Objectives xxi
Document Revision History xxii
Organization xxiv
Related Documentation xxvi
Cisco ASR 1000 Series Routers Documentation xxvi
Conventions xxvi
Obtaining Documentation and Submitting a Service Request xxvii
C H A P T E R 1 Software Packaging and Architecture 1-1
Software Packaging on the Cisco ASR 1000 Series Routers 1-1
ASR 1000 Series Routers Software Overview 1-1
Consolidated Packages 1-2
Important Information About Consolidated Packages 1-2
Individual Software SubPackages Within a Consolidated Package 1-3
Important Notes About Individual SubPackages 1-3
Optional Software SubPackages Outside of Consolidated Packages 1-4
Important Notes About Optional SubPackages 1-4
Provisioning Files 1-4
Important Notes About Provisioning Files 1-5
ROMmon Image 1-5
File to Upgrade Field Programmable Hardware Devices 1-5
Processes Overview 1-6
IOS as a Process 1-7
Dual IOS Processes 1-8
File Systems on the Cisco ASR 1000 Series Router 1-8
Autogenerated File Directories and Files 1-9
Important Notes About Autogenerated Directories 1-9
C H A P T E R 2 Using Cisco IOS XE Software 2-1
Accessing the CLI Using a Router Console 2-1
Accessing the CLI Using a Directly-Connected Console 2-2
Connecting to the Console Port 2-2
Using the Console Interface 2-2Text Part Number:
Contents
ivBook Title
78-xxxxx-xx
Accessing the CLI from a Remote Console Using Telnet 2-3
Preparing to Connect to the Router Console Using Telnet 2-3
Using Telnet to Access a Console Interface 2-3
Accessing the CLI from a Remote Console Using a Modem 2-4
Using the Auxiliary Port 2-4
Using Keyboard Shortcuts 2-5
Using the History Buffer to Recall Commands 2-5
Understanding the Command Mode 2-6
Understanding the Diagnostic Mode 2-7
Getting Help 2-8
Finding Command Options 2-8
Using the no and default Forms of Commands 2-11
Saving Configuration Changes 2-11
Managing Configuration Files 2-11
Filtering the Output of the show and more Commands 2-13
Powering Off a Router 2-14
Finding Support Information for Platforms and Cisco Software Images 2-14
Using the Cisco Feature Navigator 2-14
Using the Software Advisor 2-15
Using the Software Release Notes 2-15
C H A P T E R 3 Console Port Overview for the Cisco ASR 1000 Series Routers 3-1
Console Port Handling Overview 3-1
Telnet and SSH Overview for the Cisco ASR 1000 Series Routers 3-2
Persistent Telnet and Persistent SSH Overview 3-2
Configuring a Console Port Transport Map 3-3
Examples 3-4
Configuring Persistent Telnet 3-5
Prerequisites 3-5
Examples 3-7
Configuring Persistent SSH 3-8
Examples 3-10
Viewing Console Port, SSH, and Telnet Handling Configurations 3-11
Important Notes and Restrictions 3-16
C H A P T E R 4 Consolidated Packages and SubPackages Management 4-1
Running the Cisco ASR 1000 Series Routers: An Overview 4-1
Contents
vBook Title
78-xxxxx-xx
Running the Cisco ASR 1000 Series Routers Using Individual and Optional SubPackages: An Overview 4-2
Running the Cisco ASR 1000 Series Routers Using a Consolidated Package: An Overview 4-2
Running the Cisco ASR 1000 Series Routers: A Summary 4-3
Software File Management Using Command Sets 4-4
The request platform Command Set 4-4
The copy Command 4-5
The issu Command Set 4-5
Managing and Configuring the Router to Run Using Consolidated Packages and Individual SubPackages 4-6
Quick Start Software Upgrade 4-6
Managing and Configuring a Router to Run Using a Consolidated Package 4-7
Managing and Configuring a Consolidated Package Using the copy Command 4-7
Managing and Configuring a Consolidated Package Using the request platform software package install Command 4-8
Managing and Configuring a Router to Run Using Individual SubPackages From a Consolidated Package 4-10
Extracting a Consolidated Package and Booting Using the Provisioning File 4-10
Copying a Set of Individual SubPackage Files, and Booting Using a Provisioning File 4-14
Managing and Configuring a Router to Run Using Optional SubPackages 4-14
Installing an Optional SubPackage 4-15
Uninstalling an Optional SubPackage 4-16
Troubleshooting Software Mismatch with ESP Board ASR1000-ESP10-N 4-18
Upgrading Individual SubPackages 4-18
Upgrading a SPA SubPackage 4-19
C H A P T E R 5 Software Upgrade Processes Supported by Cisco ASR 1000 Series Aggregation Services Routers 5-1
Contents 5-2
Prerequisites for Software Upgrade Processes 5-2
ISSU Upgrade for Redundant Platforms 5-2
Overview of ISSU on the Cisco ASR 1000 Series Routers 5-2
ISSU Rollback Timer Overview 5-4
Software Upgrade with Dual IOS Processes on a Single RP Overview 5-4
Cisco IOS XE Software Package Compatibility for ISSU 5-5
Restrictions for ISSU 5-5
ISSU Upgrade Procedures 5-6
Using ISSU to Perform a Consolidated Package Upgrade in a Dual Route Processor Configuration 5-6
Using ISSU to Upgrade the SubPackages in a Dual Route Processor Configuration 5-12
Contents
viBook Title
78-xxxxx-xx
In Service One-Shot Software Upgrade Procedure 5-70
ISSU Procedures (Prior to Cisco IOS XE Release 2.1.2) 5-70
Using ISSU to Perform a Consolidated Package Upgrade in a Dual Route Processor Configuration (Prior to Cisco IOS XE 2.1.2) 5-70
Using ISSU to Upgrade SubPackages (Prior to Cisco IOS XE Release 2.1.2) 5-71
Upgrade Process With Service Impact for Nonredundant Platforms 5-72
Configuring SSO on a Cisco ASR 1001, Cisco ASR 1002, or Cisco ASR 1004 Router 5-72
Using SubPackages for Software Upgrade on a Cisco ASR 1001 Router 5-74
Using SubPackages for Software Upgrade on a Cisco ASR 1002 or Cisco ASR 1004 Router (software upgrade Command Set) 5-89
Using SubPackages for Software Upgrade on a Cisco ASR 1002 or Cisco ASR 1004 Router (request platform Command Set) 5-119
Minimal Disruptive Restart ISSU 5-151
Restrictions and Limitations 5-152
High Availability Considerations 5-152
Using ISSU to Perform a Consolidated Package Upgrade in a Dual Route Processor Configuration with MDR 5-152
Using ISSU to Upgrade the SubPackages in a Dual Route Processor Configuration with MDR 5-162
Using ISSU to Upgrade the SubPackages on a Cisco ASR 1006 or ASR 1013 Router (issu Command Set) with MDR 5-162
Using ISSU to Upgrade SubPackages on a Cisco ASR 1006 Router or ASR 1013 Router (request platform command set) with MDR 5-204
Additional References 5-246
Related Documents 5-246
Standards 5-246
MIBs 5-246
RFCs 5-246
Technical Assistance 5-247
Feature Information for Software Upgrade Process 5-248
C H A P T E R 6 High Availability Overview 6-1
Finding Feature Information in This Module 6-1
Contents 6-1
Hardware Redundancy Overview on the Cisco ASR 1000 Series Routers 6-2
Software Redundancy on the Cisco ASR 1000 Series Routers 6-4
Software Redundancy Overview 6-4
Second IOS Process on a Cisco ASR 1002 or 1004 Router 6-5
Configuring two Cisco IOS process on one RP 6-5
Route Processor Redundancy 6-6
Contents
viiBook Title
78-xxxxx-xx
Stateful Switchover 6-7
SSO-Aware Protocol and Applications 6-7
IPsec Failover 6-8
Bidirectional Forwarding Detection 6-8
Additional References 6-9
Related Documents 6-9
Standards 6-9
MIBs 6-9
RFCs 6-9
Technical Assistance 6-9
Feature Information for High Availability Overview 6-10
C H A P T E R 7 Broadband Scalability and Performance 7-1
Finding Feature Information in This Module 7-1
Contents 7-1
PPP Sessions and L2TP Tunnel Scaling 7-1
Restrictions for PPP Sessions and L2TP Tunnel Scaling 7-2
ISG Scaling 7-3
Layer 4 Redirect Scaling 7-4
Configuring the Cisco ASR 1000 Series Router for High Scalability 7-4
Configuring Call Admission Control 7-5
Control Plane Policing 7-5
VPDN Group Session Limiting 7-6
PPPoE Session Limiting 7-6
Monitoring PPP Sessions Using the SNMP Management Tools 7-6
Configuring the Access Interface Input and Output Hold Queue 7-6
Configuring the keepalive Command 7-6
Scaling the L2TP Tunnel Configurations 7-7
Using the cisco-avpair="lcp:interface-config" RADIUS Attribute 7-7
Enhancing the Scalability of Per-User Configurations 7-8
Setting the VRF and IP Unnumbered Interface Configurations in User Profiles 7-8
Setting the VRF and IP Unnumbered Interface Configurations in Virtual Interface Templates 7-8
Redefining User Profiles to Use the ip:vrf-id and ip:ip-unnumbered VSAs 7-8
Walk-by User Support for PWLAN in ISG 7-9
Restrictions for Walk-by Session Support for PWLAN in ISG 7-9
ISG Scaling to Support Lite Sessions 7-9
Additional References 7-11
Related Documents 7-11
Contents
viiiBook Title
78-xxxxx-xx
Standards 7-11
MIBs 7-11
RFCs 7-11
Technical Assistance 7-11
Feature Information for Broadband Scalability and Performance 7-12
C H A P T E R 8 Configuring Cisco License Call Home 8-1
Finding Feature Information in This Module 8-1
Contents 8-1
Prerequisites for Cisco License Call Home 8-2
Restrictions for Cisco License Call Home 8-2
Informatio n About Cisco License Call Homes 8-2
Cisco License Call Home Interface 8-2
How to Configure Cisco License Call Home 8-3
Installing Licenses or Upgrading Software by Using Cisco License Call Home 8-3
Rehosting a License by Using Cisco License Call Home 8-4
Requesting a License Resend by Using Cisco License Call Home 8-5
Configuration Examples for Cisco License Call Home 8-6
Example: Installing Licenses or Upgrading Software by Using Cisco License Call Home 8-6
Example: Rehosting a License by Using Cisco License Call Home 8-7
Example: Requesting a License Resend by Using Cisco License Call Home 8-8
Additional References 8-9
Related Documents 8-9
Standards 8-9
MIBs 8-9
RFCs 8-9
Technical Assistance 8-9
Feature Information for Cisco License Call Home 8-10
C H A P T E R 9 Configuring Call Home 9-1
Contents 9-1
Information About Call Home 9-2
Benefits of Using Call Home 9-2
How to Obtain Smart Call Home Service 9-2
Prerequisites for Call Home 9-3
How to Configure Call Home 9-3
Configuring the Management Interface VRF 9-4
What To Do Next 9-5
Contents
ixBook Title
78-xxxxx-xx
Configuring a Destination Profile 9-5
Configuring a Destination Profile to Send Email Messages 9-6
Configuring a Destination Profile to Send HTTP Messages 9-10
Working With Destination Profiles 9-14
Subscribing to Alert Groups 9-17
Periodic Notification 9-18
Message Severity Threshold 9-18
Syslog Pattern Matching 9-19
Configuring Contact Information 9-21
Example 9-22
Configuring the Number of Call Home Messages Sent Per Minute 9-23
Enabling and Disabling Call Home 9-23
Sending Call Home Communications Manually 9-24
Sending a Call Home Test Message Manually 9-24
Sending Call Home Alert Group Messages Manually 9-24
Submitting Call Home Analysis and Report Requests 9-25
Sending the Output of a Command to Cisco or an E-Mail Address 9-27
How To Configure Call Home to Support the Smart Call Home Service 9-27
Prerequisites 9-28
Configure and Enable Call Home 9-28
Declare and Authenticate a CA Trustpoint 9-31
Examples 9-33
Start Smart Call Home Registration 9-33
What To Do Next 9-34
Displaying Call Home Configuration Information 9-34
Examples 9-35
Default Settings 9-39
Alert Group Trigger Events and Commands 9-40
Message Contents 9-42
Sample Syslog Alert Notification in Long Text Format 9-46
Sample Syslog Alert Notification in XML Format 9-50
Additional References 9-57
Related Documents 9-58
Standards 9-58
MIBs 9-58
RFCs 9-58
Technical Assistance 9-59
Feature Information for Call Home 9-59
Contents
xBook Title
78-xxxxx-xx
C H A P T E R 10 Configuring a Cisco Right-To-Use License 10-1
Finding Feature Information 10-1
Contents 10-1
Prerequisites for Cisco RTU License 10-1
Restrictions for Cisco RTU License 10-2
Information About Cisco RTU License 10-2
Overview of the Cisco Licensing Mechanism 10-2
RTU Supported Software Licenses 10-2
Evaluation Licenses and RTU Licenses 10-3
How to Activate an Evaluation License 10-4
Configuration Examples for RTU Supported Software Licenses 10-6
Configuring Throughput 10-6
Example: Accepting the Global EULA 10-6
Example: Accepting an EULA for Software Redundancy License 10-7
Example: Accepting an EULA for the Inter-Chassis Redundancy License 10-7
Example: Accepting an EULA for the Lawful Intercept License 10-8
Example: Sample Output for show Commands 10-9
Sample Output for the show license EULA Command 10-9
Sample Output for the show license all Command 10-10
Additional References 10-11
Related Documents 10-11
MIBs 10-12
Technical Assistance 10-12
Feature Information for Cisco RTU License 10-13
C H A P T E R 11 Multilink PPP Support for the ASR 1000 Series Aggregation Services Routers 11-1
Finding Feature Information 11-1
Contents 11-2
Cisco IOS XE Scaling Limits for MLP Bundles 11-3
Restrictions for MLP over Serial Interfaces 11-5
Restrictions for MLP over Ethernet at PTA and LAC 11-5
Restrictions for MLP over ATM at PTA and LAC 11-6
Restrictions for MLP at LAC 11-6
Restrictions for MLP over LNS 11-6
Restrictions for Broadband MLP at PTA and LNS 11-7
Multilink PPP Feature 11-7
Interface Multilink versus Virtual Access Interfaces 11-8
Quality of Service 11-8
Contents
xiBook Title
78-xxxxx-xx
Restrictions for QoS 11-8
Multilink PPP Packet Overhead Accounting for Shaping and Policing 11-9
Downstream Model-F Shaper on LNS 11-10
Bandwidth 11-11
MTU 11-11
Downstream Link Fragmentation and Interleaving 11-12
Unsupported Link Fragmentation Functionality on the ASR 1000 Series Aggregation Services Routers 11-13
IP Type of Service Reflect (LNS) 11-14
IP Tunnel Marking (LNS) 11-14
Unsupported Features 11-15
Additional References 11-15
Related Documents 11-15
Standards 11-16
MIBs 11-16
RFCs 11-16
Technical Assistance 11-17
Feature Information for Multilink PPP Support 11-17
C H A P T E R 12 iWAG on Cisco ASR 1000 Series Routers for Service Provider WiFi Offload 12-1
Finding Feature Information 12-1
Contents 12-2
Overview of the iWAG Deployment 12-2
Restrictions for the GTP of the iWAG 12-3
Information About IP Address Assignment 12-4
Information About Authentication Methods 12-4
Information About GGSN Selection 12-5
How to Configure Authentication, Authorization, and Accounting for the iWAG 12-5
How to Configure DHCP when the iWAG Acts as a DHCP Proxy 12-8
How to Configure the Cisco ISG Class Map and Policy Map for the iWAG 12-10
How to Configure a Subscriber Initiator for the iWAG 12-13
How to Configure a Tunnel Initiator for the iWAG 12-15
How to Enable Mobile Client Service Abstraction and Access Lists 12-17
How to Configure the GTP of the iWAG 12-19
Configuration Examples for the iWAG 12-21
Example: Configuring the iWAG Using the TAL Authentication Method 12-21
Example: Configuring the iWAG Using the EAP-SIM Authentication Method 12-23
Example: Configuring the iWAG Using the Web Logon Authentication Method 12-25
Contents
xiiBook Title
78-xxxxx-xx
Multiple-Flow Tunnel 12-27
GTP Version 2 in the iWAG on the Cisco ASR 1000 Series Aggregation Services Routers 12-27
Restrictions for GTPv2 of the iWAG 12-28
GTPv2 Configuration 12-28
RADIUS Configuration 12-28
Intra-iWAG Roaming 12-29
iWAG SSO Support for GTP on the Cisco ASR 1000 Series Aggregation Services Routers 12-30
Enabling SSO Support for the GTP 12-31
Configuring ISG Policy Templates on the Cisco ASR 1000 Series Aggregation Services Routers 12-32
Restrictions for Configuring ISG Policy Templates 12-32
How to Configure ISG Policy Templates 12-32
Additional References 12-33
Related Documents 12-33
Standards 12-33
MIBs 12-33
RFCs 12-33
Technical Assistance 12-34
Feature Information for the iWAG on the Cisco ASR 1000 Series Routers for Service Provider WiFi Offload 12-34
C H A P T E R 13 UniDirectional Link Detection (UDLD) Protocol 13-1
Finding Feature Information 13-1
Contents 13-1
Restrictions for the UDLD Protocol 13-1
Information About the UDLD Protocol 13-2
UDLD Overview 13-2
Configuring the UDLD Aggressive Mode 13-3
Default UDLD Configuration 13-3
How to Configure the UDLD Protocol 13-3
Enabling UDLD Globally 13-4
Enabling UDLD on Individual LAN Interfaces 13-4
Disabling UDLD on Fiber-Optic LAN Interfaces 13-6
Configuring the UDLD Probe Message Interval 13-7
Resetting the Disabled LAN Interfaces Manually 13-8
Resetting the Disabled LAN Interfaces Automatically 13-8
Debugging UDLD 13-9
Configuration Examples for UDLD Protocol 13-10
Example: Verifying a UDLD Configuration 13-10
Contents
xiiiBook Title
78-xxxxx-xx
Example: Verifying Information About Neighbors 13-10
Example: Displaying all the UDLD Interface Statuses 13-11
Additional References 13-12
Related Documents 13-12
Standards 13-12
MIBs 13-12
RFCs 13-12
Technical Assistance 13-13
Feature Information for Configuring UDLD on Cisco ASR 1000 Series Aggregation Services Routers 13-14
C H A P T E R 14 Using the Management Ethernet Interface 14-1
Finding Feature Information in This Module 14-1
Contents 14-1
Gigabit Ethernet Management Interface Overview 14-1
Gigabit Ethernet Port Numbering 14-2
IP Address Handling in ROMmon and the Management Ethernet Port 14-2
Gigabit Ethernet Management Interface VRF 14-3
Common Ethernet Management Tasks 14-3
Viewing the VRF Configuration 14-4
Viewing Detailed VRF Information for the Management Ethernet VRF 14-4
Setting a Default Route in the Management Ethernet Interface VRF 14-4
Setting the Management Ethernet IP Address 14-4
Telnetting over the Management Ethernet Interface 14-5
Pinging over the Management Ethernet Interface 14-5
Copy Using TFTP or FTP 14-5
NTP Server 14-6
SYSLOG Server 14-6
SNMP-Related Services 14-6
Domain Name Assignment 14-6
DNS service 14-6
RADIUS or TACACS+ Server 14-6
VTY lines with ACL 14-7
Additional References 14-8
Standards 14-8
MIBs 14-8
RFCs 14-8
Technical Assistance 14-8
Feature Information for Using the Management Ethernet Interface 14-8
Contents
xivBook Title
78-xxxxx-xx
C H A P T E R 15 Network Synchronization Support 15-1
Finding Feature Information 15-1
Contents 15-1
Prerequisites for Network Synchronization Support 15-2
Network Synchronization Overview 15-2
Features Supported on ASR 1000 Platforms 15-2
Synchronization Status Message and Ethernet Synchronization Messaging Channel 15-5
Synchronization Status Message 15-5
Ethernet Synchronization Messaging Channel 15-6
Clock Selection Algorithm 15-6
Restrictions for Network Synchronization 15-7
Configuring Network Synchronization 15-7
Configuring Clock Recovery from SyncE 15-7
Configuring Clock Recovery from a BITS Port 15-9
Configuring Clock Recovery with a BITS Port as an Input-Source 15-9
Configuring Clock Recovery with a BITS Port as an Output-Source 15-11
Configuring SyncE by Using the Line to External Feature 15-13
Managing Synchronization 15-15
Verifying the Network Synchronization Configuration 15-17
Troubleshooting the Network Synchronization Configuration 15-20
Additional References 15-22
Related Documents 15-22
Standards 15-22
MIBs 15-22
RFCs 15-22
Technical Assistance 15-22
Feature Information for Network Synchronization Support 15-23
C H A P T E R 16 Service Provider WiFi: Support for Integrated Ethernet Over GRE 16-1
Finding Feature Information 16-2
Contents 16-2
Restrictions for Configuring Ethernet Over GRE 16-3
Prerequisites for Configuring Ethernet Over GRE 16-3
Information About Configuring Ethernet Over GRE 16-3
EoGRE Deployment with PMIPv6 Integrated for Mobility Service 16-6
EoGRE Deployment with GTP Integrated for Mobility Service 16-7
EoGRE Deployment with ISG Integrated for Simple IP Service 16-7
Supported Features 16-8
Contents
xvBook Title
78-xxxxx-xx
How to Configure the EoGRE Feature 16-8
Examples 16-11
Additional References 16-13
Related Documents 16-13
Standards 16-13
MIBs 16-13
RFCs 16-13
Technical Assistance 16-14
Feature Information for Configuring Ethernet Over GRE 16-14
C H A P T E R 17 Configuring Bridge Domain Interfaces 17-1
Finding Feature Information 17-1
Contents 17-1
Restrictions for Bridge Domain Interfaces 17-1
Information About Bridge Domain Interfaces 17-2
Ethernet Virtual Circuit Overview 17-2
Bridge Domain Interface Encapsulation 17-3
Assigning a MAC Address 17-3
Support for IP Protocols 17-3
Support for IP Forwarding 17-4
Packet Forwarding 17-4
Layer 2 to Layer 3 17-4
Layer 3 to Layer 2 17-4
Link States of a Bridge Domain and a Bridge Domain Interface 17-5
BDI Initial State 17-5
BDI Link State 17-5
Bridge Domain Interface Statistics 17-5
Creating or Deleting a Bridge Domain Interface 17-6
Bridge Domain Interface Scalability 17-6
How to Configure a Bridge Domain Interface 17-6
Example 17-7
Additional References 17-9
Related Documents 17-9
Standards 17-9
MIBs 17-9
RFCs 17-9
Technical Assistance 17-9
Feature Information for Configuring Bridge Domain Interfaces 17-10
Contents
xviBook Title
78-xxxxx-xx
C H A P T E R 18 Enabling Support for Tunable DWDM-XFP-C 18-1
Configuring the DWDM-XFP-C Module 18-4
Verifying the ITU Configuration 18-4
C H A P T E R 19 Monitoring and Maintaining Multilink Frame Relay 19-1
Finding Feature Information in This Module 19-1
Contents 19-1
Feature Overview 19-1
Configuring Multilink Frame Relay 19-2
Monitoring and Maintaining Frame Relay and Multilink Frame Relay 19-2
Additional References 19-3
Related Documents 19-3
Standards 19-3
MIBs 19-3
RFCs 19-3
Technical Assistance 19-3
Feature Information for Monitoring and Maintaining Multilink Frame Relay 19-4
C H A P T E R 20 Configuring MPLS Layer 2 VPNs 20-1
Finding Feature Information 20-1
Contents 20-1
Overview of L2VPN Interworking 20-2
L2VPN Interworking Modes 20-2
Ethernet or Bridged Interworking 20-2
IP or Routed Interworking 20-3
Virtual Private LAN Services 20-4
Reverse Layer 2 Gateway Protocol 20-4
BPDUs Sent Out of R-L2GP Ports 20-5
BPDUs Received on R-L2GP Ports 20-6
BPDUs Received on L2 Protocol Forwarding PW 20-6
Restrictions for R-L2GP 20-6
Configuring the R-L2GP 20-6
Configuring the MST 20-7
Configuring an R-L2GP Instance 20-8
Attaching an R-L2GP Instance to a Port 20-9
Example: Configuring an R-L2GP 20-10
Configuring the Layer 2 Protocol Forwarding Virtual Private LAN Services Pseudowire between Two Redundant NPES 20-10
Contents
xviiBook Title
78-xxxxx-xx
Verifying an R-L2GP Configuration 20-11
Prerequisites for Frame Relay DLCI-to-ATM AAL5SNAP Bridged Interworking 20-12
Frame Relay DLCI-to-ATM AAL5SNAP Bridged Interworking 20-12
Configuring Frame Relay DLCI-to-ATM AAL5SNAP Bridged Interworking 20-14
Example: Frame Relay-to-ATM Bridged Interworking on an ATM-PE Router 20-18
Example: Frame Relay-to-ATM Bridged Interworking on a Frame Relay-PE Router 20-24
Gigabit EtherChannel for Virtual Private Wire Service 20-25
Supported Modes 20-25
GEC Like-to-Like Mode 20-25
Any-to-GEC Mode 20-26
Restrictions for Gigabit EtherChannel for Virtual Private Wire Service 20-26
Configuring Gigabit EtherChannel for Virtual Private Wire Service 20-27
EtherChannel-to-EtherChannel over MPLS (Bridged) Interworking 20-27
EtherChannel-to-EtherChannel over MPLS (Routed) Interworking 20-29
Example: GEC Like-to-Like (Routed) Interworking 20-31
Any-to-EtherChannel over MPLS (Bridged) Interworking 20-32
Any-to-EtherChannel over MPLS (Routed) Interworking 20-34
Additional References 20-38
Related Documents 20-38
Standards 20-38
MIBs 20-38
RFCs 20-39
Technical Assistance 20-39
Feature Information for Configuring MPLS Layer 2 VPNs 20-39
Glossary 20-42
C H A P T E R 21 LSM-MLDP-based MVPN Support 21-1
Restrictions and Usage Guidelines 21-1
Configuring LSM-MLDP-based MVPN Support 21-2
Configuring MLDP MVPN Intranet Services 21-2
Verification 21-6
Configuring MLDP MVPN for Extranet Services 21-7
Configuring MLDP TE-FRR Support 21-18
Configuring MLDP with PIM-based MVPN 21-19
MLDP Support with Load Balancing 21-19
Root Node Redundancy 21-19
Verification 21-20
Sample Configuration for MLDP MVPN 21-30
Configuration Example Using SSM Mode 21-30
Contents
xviiiBook Title
78-xxxxx-xx
Configuration Example Using SM Mode 21-46
Troubleshooting LSM MLDP based MVPN Support 21-62
MVPNv4 MLDP over GRE 21-63
Prerequisites for MVPNv4 MLDP over GRE 21-63
Restrictions for MVPNv4 MLDP over GRE 21-63
Configuring MVPNv4 MLDP over GRE 21-64
Example: Configuring MVPNv4 MLDP over GRE 21-69
C H A P T E R 22 Tracing and Trace Management 22-1
Tracing Overview 22-1
How Tracing Works 22-1
Tracing Levels 22-2
Viewing a Tracing Level 22-3
Setting a Tracing Level 22-4
Viewing the Content of the Trace Buffer 22-5
C H A P T E R 23 Configuring and Accessing the Web User Interface 23-1
Web User Interface Overview 23-1
Web User Interface General Overview 23-1
Legacy Web User Interface Overview 23-2
Graphics-Based Web User Interface Overview 23-3
Persistent Web User Interface Transport Maps Overview 23-4
Configuring the Router for Web User Interface Access 23-5
Authentication and the Web User Interface 23-7
Domain Name System and the Web User Interface 23-7
Clocks and the Web User Interface 23-7
Accessing the Web User Interface 23-8
Using Auto Refresh 23-9
Web User Interface Tips and Tricks 23-10
A P P E N D I X A Unsupported Commands A-1
A P P E N D I X B Configuration Examples B-1
Configuring the Router to Boot the Consolidated Package on the TFTP Server B-1
Copying the Consolidated Package from the TFTP Server to the Router B-5
Configuring the Router to Boot Using the Consolidated Package Stored on the Router B-6
Extracting the SubPackages from a Consolidated Package into the Same File System B-7
Contents
xixBook Title
78-xxxxx-xx
Extracting the SubPackages from a Consolidated Package into a Different File System B-9
Configuring the Router to Boot Using the SubPackages B-10
Backing Up Configuration Files B-14
Copying a Startup Configuration File to Bootflash B-14
Copying a Startup Configuration File to an USB Flash Disk B-14
Copying a Startup Configuration File to a TFTP Server B-15
Enabling a Second IOS Process on a Single RP Using SSO B-15
ISSU—Consolidated Package Upgrade B-19
Contents
xxBook Title
78-xxxxx-xx