Precision Rotating Components• ISO 14971 Application of risk management to medical devices....

Precision Rotating Components

2 3

Located at the Fairfield Metro a 1.1 mil sq./ft. commercial development and regional commuter rail station on the New York City metro rail line (1 hour from Manhattan).

Elinco factory floor in Bridgeport, Connecticut.

Elinco - Japanese Products Corp. facility, exterior view.

Elinco – Japanese Products Corp. warehouse interior, located in Bridgeport, Connecticut.

Elinco – Japanese Products Corp. factory floor.

Aerial view of the corporate offices and manufacturing site. Fairfield, CT.

ABOUT ELINCO INTERNATIONAL, INC - JPC

FACTS AND FIGURESFounded 1926 (JPC division 1969)

Legal Form Stock owned. Majority Sharehold.

Company Focus Manufacturing Technology of Motors, Air Moving Devices, and Drives.

Distribution Network Worldwide in 12 countries

Products Brushless DC Motors, Slotless Brushless Motors, Stepper Motors, Permanent Magnet DC, Performance BLDC Fans and Blowers, Encoders, Gearboxes, customized drives.

Main Markets Communication, Industrial Automation, Medical Technology, Office Automation, Security, Home Automation, Automotive.

Elinco JPC Western Sales Team Elinco JPC Eastern Sales Team

Tool allocation expecting for production increasing

VIETNAM PLANT

Pressing

Die Casting

4 5

Low coggingHigh efficiencyHigh power densityPackaged or OnBoard Driver

Motors have a low profile. Onboard or separate driver op-tions.

New KF Series has an additional 5-10% more torque than compet-itor motors. A motor size down, achieving the torque of one size up. Expanding the rotor diame-ter to its maximum limit within a new "flattened" structure allows the 42 motor profile to be main-tained. Large Rotor, High Torque.

The best magnetic balance is em-ployed in our round type step-ping motor. Motor performance is greatly improved using the lat-est technology of three-dimen-sional magnetic field analysis and robust design.

Drive Circuit is simplified because the motor is driven with star winding connection. Ultra-low vi-bration and low noise is achieved with our micro-step driver.

Base original design forms the foundation of future designs. Im-proved vibration, noise level, and efficiency.

Motors are designed small with high performance. We recently released a special magnetic cir-cuit design motor. This motor design is smaller and has a higher performance than conventional FED, FYD series motors. Compact design driver - "Palm Mini R"Type is the smallest. (20 W, 40 W only) Wide range (200 r/min-2500 r/min 60 W:65 r/min-2500 r/min), stepless speed control. Very steady characteristics (Feed back control employed). Speed pulse output can be used for speed.

An Elinco slotless brushless DC (SBLDC) motor consists of a sta-tor winding positioned inside a laminated stator ring (without conventional teeth) and a per-manent magnet motor. This pro-vides more peripheral space for the stator winding. This also al-lows more magnet surface area and more air gap flux. Powerful rare earth magnets provide high torque to motor weight ratios. The absence of stator teeth en-ables more winding copper and power density which can develop more torque.

Small size motors with high per-formance Speed range (2500 RPM to 10,000 RPM). Custom-ized end bells and stack lengths. Special windings. High efficiency winding. Elinco's VH series BLDC motors are an ideal choice for application that requires high reliability, high efficiency, and high power to volume ratio. They are capable of providing a large amount of torque over different speed ranges. The VH series mo-tors are internally commutated motors designed to run from a direct current source.

BRUSHLESS DC MOTORS

STEPPER MOTORS

VH Series High SpeedSL Series SlotlessFHD Series <2500 rpmFYD Series <2500 rpm

KH Series 2 Phase SquareNema 17, 23

KT Series 3 PhaseNema 15, 17, 23, 24, 34

KA Series 2 Phase RoundNema 17, 23

KF Series 2 Phase SquareNema 17, 23

PRODUCTS

DRIVES AND CONTROLS

KF Series 2 phase Square. Nema 17, 23

KA 2 phase Round. Nema 17, 23

KT Series 3 phase. Nema 15, 17, 23, 24, 34

Stepper Motors

New KF Series has an additional 5-10% more torque than competitor

motors . << period

DME Series

DMN Series (Long Life)

H Mark II Series

H Mark Series with Speed Control

CGI High quality gearheads for AC induction motors, permanent magnet DC motors, stepmotors ,and BLDC motors.

VPX Series: Victory SI Series: Spur

Standard and custom motion control solutions, manufactured to the highest quality to meet your motor application feedback needs.

PMDC Motors Planetary Gearboxes

Encoders

AC Motors

2 phase Driver + Controller Standard. OEM Design available.

3 phase Driver + Controller Standard. OEM Design available

Drives and Controls Packaged Drivers

Closed Loop Drivers

KH Series 2 phase Square. Nema 17,23

- -

SI Series: Spur

FANS AND BLOWERS

Uni-polar or Bi-polar constant cur-rent driver. The micro-stepping feature may be selected from any-one of the following settings: 1/1 (full step), 1/2 (micro-step), and 1/4 (micro step).

48 to 80 VDC, 8 to 20 Amps PWM frequency up to 100KHz 2 x peak momentary power Sensored and sensorless vector control to 120 KRPM.

48 to 80 VDC, 8 to 20 Amps PWM frequency up to 100KHz 2 x peak momentary power. Sensored and sensorless vector control to 120 KRPM.

New 2 phase Control System al-lows Stepping motor to operate at High Speeds 0.72 can be achieved (same as 5 phase motors) and can be divided by 80 (or 0.009 deg).

KF Series 2 phase Square. Nema 17, 23

KA 2 phase Round. Nema 17, 23

KT Series 3 phase. Nema 15, 17, 23, 24, 34

Stepper Motors

New KF Series has an additional 5-10% more torque than competitor

motors . << period

DME Series

DMN Series (Long Life)

H Mark II Series

H Mark Series with Speed Control

CGI High quality gearheads for AC induction motors, permanent magnet DC motors, stepmotors ,and BLDC motors.

VPX Series: Victory SI Series: Spur

Standard and custom motion control solutions, manufactured to the highest quality to meet your motor application feedback needs.

PMDC Motors Planetary Gearboxes

Encoders

AC Motors

2 phase Driver + Controller Standard. OEM Design available.

3 phase Driver + Controller Standard. OEM Design available

Drives and Controls Packaged Drivers

Closed Loop Drivers

KH Series 2 phase Square. Nema 17,23

- -

Products Applications Company Service

Brushless DC Motors About Japanese Products Corp JPC Worldwide Stepper Motors Facts and Figures Locate a Rep Permanent Magnet DC Quality Manual-Mission Resources AC Motors Research and Development Terms Drives and Controls Production Privacy Policy Encoders Gearboxes Motor Accessories Fans and Blowers Fan Accessories Assembly

(C) 2016 Japanese Products Corp. All Right Reserved| Privacy Policy | Terms Of Use

Tube Axial Fans

Silent Fans

5-8 dB quiter than previous fans over the operating range from 50% and above. 30% improvement.

High Pressure Fans

Industry leader in high pressure airflow. Low noise with high energy savings for high impedance equipment. Metal housing heat sinks the high performance motor to improve efficency.

Blowers

Impellers

Specially molded 3-dimensional blades and venturies, high performance and long life motors, high reliablity (L10 and MTBF). 40mm to 172mm square or round.

Fans and Blowers

Specially molded 3-dimen-sional blades and ventu-ries, high performance and long life motors, high reliablity (L10 and MTBF). 40mm to 172mm square or round.

5-8 dB quiter than previ-ous fans over the operating range from 50% and above. 30% improvement.

Industry leader in high pressure airflow. Low noise with high energy savings for high impedance equip-ment. Metal housing heat sinks the high performance BLDC motor to improve efficency.

Ideal for spot cooling and high impedance systems. Super Silent Blower. Opti-mized with C.F.D. Design System. Very low noise is achieved by optimizing air flow between the intake and the outlet.

Special shaped blades. Shaped to lead air from the impeller out smoothly. Many sizes and mountings.

CGI

US Digital Encoders

PLANETARY GEARBOXES

ENCODERSH Mark II Series with

Speed ControlDNM Series

H Mark II SeriesDME SeriesPMDC MOTORS AC MOTORS

VPX Series: Victory

Closed Loop Stepper DriversPackaged DriversOEM Slotless Drives,

400 WattOEM Slotless Drives,

1600 Watt

ImpellersBlowersHigh Pressure fansSilent FansTube Axial Fans

ISO 9001:2015 CERTIFIED

6 7

Elinco - JPC offers fast solutions on Mechanical, Electrical, and Metal design. Utilize Customization and Value Add Capability.

Improve Performance | Quality per ISO and Six Sigma | Special Documentation Save Time | Supply Chain Control

VALUE ADDED SERVICESElinco - JPC value-added services offers our strong capability to manufacture motors specific to your environmental, mechanical, and dimensional requirements.

Value Added Services for Motors such as pulley and coupling installation, encoders, gearboxes, special shafts, dampers and more.

CUSTOMIZE

Many Shaft options easily and quickly Configured

End Bell Design Semi-Custom or Custom Software Analytics Neodymium, Ferrite, or FCC Magnets

THERMAL ANALYSIS ENVIROMENTAL PROECTION BEARINGS CONNECTORS & WIRING

Metals and Plastics Standard Coating, ECoating,

Various IP Ratings Bearings Special Leadwires and

Connectors






Connectors






Connectors






Connectors

Special Lead wires and Connectors

BearingsStandard Coating, E-Coating, Various IP

Metals and Plastics

BEARINGS WIRE HARNESS ASSEMBLYENVIRONMENTAL PROTECTIONTHERMAL ANALYSIS

Customize JPC offers fast solutions on Mechanical, Electrical, and Metal design? Utilize Customization and Value Add Capability. Improve Performance Quality per ISO and Six Sigma Special Documentation Save Time Supply Chain Control

Value Added Services JPC value-added services offers our strong capability to manufacture motors specific to your environmental, mechanical, and dimensional requirements. Value Added Services for Motors such as pulley and coupling installation, encoders, gearboxes, special shafts, dampers and more. ENCODERS VIBRATION GEARBOXES

Verification & Accuracy with Encoders

Resonance & Vibration with Dampers

Precision Geabox Options. Intelligent Motors with Electronic Design

SHAFT OPTIONS CUSTOM HOUSINGS CUSTOMIZED WINDINGS ACTIVE MATERIAL ANALYSIS



















Software Analytics Neodymium, Ferrite, or FCC Magnets

Semi-Custom or CustomEnd Bell DesignMany shaft options easily and quickly configured

ACTIVE MATERIAL ANALYSISCUSTOMIZED WINDINGSCUSTOM HOUSINGSSHAFT OPTIONS

























Intelligent Motors with Electronic Design

Precision Gearbox OptionsResonance & Vibration with Dampers


CUSTOMIZED BOARD DESIGNVIBRATION GEARBOXESENCODERS


From Prototype to Production Elinco - JPC is your Single-Source Supplier for Contract Manufacturing and Electromechanical Subassembly requirements. Our custom engineered OEM solutions utilize expertise in process controls of precision components, gearing, assembly, testing, precision motion control build to print as well as best practices. Factories in Asia and the US are ISO certified.

OUR CORE STRENGTHS ARE:

• Contract Manufacturing – Motion Control Assemblies• Precision positioning and motion systems• Fine-pitch, custom, and standard gearing experts to AGMA

standards• Specialists in gears, bearings, motors, precision assemblies• Unique engineered solutions from initial design to production

• Manufacturing excellence and ultimate quality• DFMEA, PFMEA, FAI, PPAP, Control Plan• Reliability in design, and total partnership with our customers• Vertically Integrated Manufacturing• Manufacturing and Assembly of small to large Motion Control

and Electro-Mechanical Assemblies

INTERNATIONAL STANDARDS ON MEDICAL ASSEMBLIES

• ISO 13485(MDD) Management system for medical devices• IEC 60601-1-1 Medical equipment and electrical equipment• IEC 60601-1-2 Electromagnetic compatibility for medical

devices

• IEC 60601-2-24 Safety of infusion pumps and controllers• ISO 14971 Application of risk management to medical devices• IEC 62304 Medical device software - software life cycle

processes

Gears - Pulleys - Lead Screws – Holes – Slots – Chamfers - Drill and Pin – Flats – Threads - Fan Trays Encoder Mounting- US Digital partner, CUI partner - Balancing, Testing

ELECTROMECHANICAL SUB-ASSEMBLIESISO 9001:2015 CERTIFIED

8 9

BRUSHLESS DC MOTORS TECHNOLOGY

FY AND FHD SERIES

- LOW COGGING COMPACT DESIGN -

PERFORMANCE

Leading Technology FY and FH Series> Small design and high performance> Compact driver> Enhanced Life> Continuous duty for more than 16000 hrs> Wide range of speed control> Different output shafts> Gearbox combinations> Exceptionally low cogging

SLOTTED - BRUSHLESS DC MOTORSVH Series

- Low cogging/Compact design/Customizable –

PERFORMANCE

Leading Technology VH Series> High speed, high torque, high efficiency> Low torque ripple and cogging> Customized windings> Wide range of planetary (low backlash) and spur gearbox> Closed loop (encoder) optional> Speed control optional> Customized winding> Customizable end bells, shafts, and mountings

SLOTTED - BRUSHLESS DC MOTORS FY and FHD Series

- Low cogging Compact design –

PERFORMANCE




PERFORMANCE




PERFORMANCE




PERFORMANCE




PERFORMANCE

FYD OuterRotor Series




PERFORMANCE




PERFORMANCE

FYD InnerRotor Series

VH SERIES

- LOW COGGING / COMPACT DESIGN / CUSTOMIZABLE -

PERFORMANCE




PERFORMANCE




PERFORMANCE




PERFORMANCE




PERFORMANCELeading Technology FY and FH Series> Small design and high performance> Compact driver> Enhanced Life> Continuous duty for more than 16000 hrs> Wide range of speed control> Different output shafts> Gearbox combinations> Exceptionally low cogging



PERFORMANCE




PERFORMANCE

VH Series(Inner and Outer Rotor

and Closed Loop)

10 11

SLOTLESS BRUSHLESS DC TECHNOLOGY

SL SERIES ROUND WIRE

- 30 - 40 % HIGHER KM TORQUE -

PERFORMANCE

SLOTLESS – BLDC Random Wind- 30-40% HIGHER Km TORQUE –

PERFORMANCE

Leading Technology> Very high-speed capability (60000 RPM)> High power to weight ratio> High quality ball bearing for increased life> High temperature insulation for reliability> Standard Nema size line up> Customized housing, winding, lamination

and powerful magnets> Customized lead terminations (I/O,

specific color, different connectors)> Low magnetic saturation allows to operate

several times higher than rated power toget very high torque for short intervals

> Increased heat dissipation> Improved Kt> Suitable for medical, industry automation,

and electronic assembly EC (electronicallycontrolled) position feedback system

Leading Technology> Proven in automotive and military and

medical applications worldwide.> Installation in most of all major

automotive manufacturers factories andgovernment military hardware world wide.

SLOTLESS – BLDC Form Wound- Up to 95% Efficiency –

PERFORMANCESlotless Benefits> Simplified stator design> Good copper fill due to lack of teeth> Lower investment cost for new or

revised designs

Slotless Benefits> High efficency, more

work per battery chargemeans greater range

> Elimination of coggingand ripple torque


PERFORMANCE












revised designs





PERFORMANCE












revised designs





PERFORMANCE












revised designs





PERFORMANCE












revised designs





PERFORMANCE












revised designs




SLOTLESS FORM WINDING

- UP TO 90% EFFICIENCY -

PERFORMANCE


PERFORMANCE












revised designs





PERFORMANCE












revised designs





PERFORMANCE












revised designs





PERFORMANCE












revised designs





PERFORMANCE












revised designs





PERFORMANCE












revised designs




12 13

When others say they can't, we say we can... and do!Whether the issue is speed, power, weight, size, ef-ficiency, noise, torque ripple, heat rise, etc., each or all are optimized to achieve custom performance with relatively short design and response time.

Tooling charges for custom prototypes are nominal. Elinco has produced a wide range of sizes from 1” to over 10” in diameter, and basic tooling of many sizes is already available.

Elinco rotor/stator sets enable simplified OEM de-signs. Bearings, housings and alignment problems are eliminated, thus providing cost-effective, reliable solutions.

As the energy product of magnets increases and costs decrease, and the manufacture of the stator can be more mechanized and cost-effective, the slotless motor technology will be the logical choice for many brushless DC motor applications.

HousingsVarious configurations and mounting means to suit the specific application. Option-al fluting for maximum heat transfer and cooling.

SLOTLESS BRUSHLESS DC MOTORS

CoversProtect feedback devices and provide auxiliary mounting areas.

StatorsSlotless with low inductance and low resistance for maxi-mum efficiencies, and cogless, jitter free operation at both high and low speeds.

BalancingBalancing washers for preci-sion balancing to quality grade ansi g-0.4 Or better.

ShaftsHardened stainless steel or other specialty alloys, preci-sion ground, custom designed extensions.

RotorsPermanent magnet with high energy rare earth magnets for maximum energy density and high power to size ratios. Covered by sleeve for strength and elimination of winding losses.

BearingsPrecision class 5&7 - precision preload, bearing type and lu-brication selected to match application.

CommutationPrecision located and sup-ported hall switches. Separate sensor magnets for thermal stability.

What is an Elinco slotless brushless DC (SBLDC) motor?An Elinco slotless brushless DC (SBLDC) motor con-sists of a stator winding positioned inside a laminated stator ring (without conventional teeth) and a perma-nent magnet motor. This provides more peripheral space for the stator winding.

This also allows more magnet surface area and more air gap flux. Powerful rare earth magnets provide high torque to motor weight ratios. The absence of stator teeth enables more copper winding and power densi-ty which can develop more torque. It also eliminates torque cogging and minimizes audible noise.

We are experts in the design and fabrication of custom SBLDC motors and rotor/stator sets.Elinco has flexibility, responsiveness, and expertise in the design and fabrication of custom SBLDC mo-tors. There are few restrictions on physical dimension choices since stator laminations are simple annular rings, economical to produce, and high energy mag-nets are readily available in arcs and slabs of all sizes. There is freedom to choose magnetic and mechani-cal air gaps, number of poles, pole spans, back-iron thickness, magnetic densities, and copper fills, etc. for each specific application.

Zero-cogging and lower torque ripple... no preferred rotor position due to absence of stator teeth.

High efficiencies... more dense copper fill enables reduced stator resistance and winding losses.... no stator tooth saturation and reduced core losses due to less stator iron.

Low noise levels... no tooth lamination flux changes to generate electrical hum.

Low speed performance... smooth, cogless, jitter-free direct drive operation down to a few degrees per minute.

High speed performance... no high frequency teeth losses for increased efficiency

FEATURES, BENEFITS, CAPABILITIES

Basic frame sizes available(frame number/nominal dia.)

12,000 - 30,000 RPM16mm, 28mm and 36mm Diameters

34,000 - 47,000 RPM27mm, 34mm, 39mm, 45mm and 49mm Diameters

...Custom frame sizes and windings available.

HP ranges (nominal)Subfractional to 10 HP, and beyond

Torque Constants Voltage Constants... unlimited wide ranges, custom configured for each application: typically, KT’s of 1 through 600 oz.-in/amp and KE’s of 1 through 450 volts/1000 RPM.

14 15

HYBRID STEPPING MOTORS- TORQUE –

PERFORMANCE

Leading Technology> High speed> High output> Large step angle

Leading Technology> Low vibration> Smooth rotation> Very low noise

FANS / BLOWERS/ IMPELLERS- AIRFLOW AND PRESSURE -

PERFORMANCE

Comparison of Driving Torque Variation. Inner Vibration absorbing structure.

> Wider low noiseoperating rangeallows noise reductionin higher pressureapplications

Leading Technology> High performance

BLDC motor heat sunkto metal frame

> Fixed blades to deliverextremely high pressure

Leading Technology


PERFORMANCE




PERFORMANCE






Leading Technology


PERFORMANCE




PERFORMANCE






Leading Technology


PERFORMANCE




PERFORMANCE






Leading Technology


PERFORMANCE




PERFORMANCE






Leading Technology


PERFORMANCE




PERFORMANCE






Leading Technology


PERFORMANCE




PERFORMANCE






Leading Technology


PERFORMANCE




PERFORMANCE






Leading Technology

HYBRID STEPPING MOTORS TECHNOLOGY

- TORQUE -

PERFORMANCE

KH, KV, KF Series 2 PhaseNema 11, 17, 23, 34

FANS / BLOWERS / IMPELLERS TECHNOLOGY

- AIRFLOW AND PRESSURE -

PERFORMANCE


PERFORMANCE




PERFORMANCE






Leading Technology


PERFORMANCE




PERFORMANCE






Leading Technology


PERFORMANCE




PERFORMANCE






Leading Technology


PERFORMANCE




PERFORMANCE






Leading Technology


PERFORMANCE




PERFORMANCE






Leading Technology


PERFORMANCE




PERFORMANCE






Leading Technology


PERFORMANCE




PERFORMANCE






Leading Technology


PERFORMANCE




PERFORMANCE






Leading Technology

16 17

OUTER ROTOR FYD SERIES

Size mm

Length mm

Holding Torque mNm

Rated Speed @Rated Load

RPMDrive Method Model

SeriesConnector

(Maker)Features

Comparison Features

60 32 39 1500

Hall Sensor/DCFYD

(Plain Shaft/Pinion Shaft)

Per Customer require-

ment

Standard Reliable, Rohs, Continuous duty,

More life, Overload Protec-tion, wide Range Gearbox

selection.

80 39 98 1500 Standard

80 45 160 1500 Standard

90 61.5 250 1500 High Torque

INNER ROTOR FHD SERIES

Size mm

Length mm

Holding Torque mNm



SeriesConnector

(Maker)Features

Comparison Features

60

46 98 2000

Hall Sensor/DCFHD

(Plain Shaft/Pinion Shaft)


ment

Standard Reliable, Rohs, Continuous duty,

More life, Overload Protec-tion, wide Range Gearbox

selection60 200 2000 High Power

OUTER ROTOR BLDC MOTORS VH SERIES

Size mm

Length mm

Holding Torque

Range mNm



SeriesConnector

(Maker)Features

Comparison Features

32

18 24.6~73.8 2100

Hall Sensor/DC VH32


ment

Standard

Reliable, Rohs, Continuous duty,

High Inertia, Concentrated Winding,Enhanced Life

18 25.1~75.3 2800

18 25.5~76.5 2760

18 24.7~74.1 2950

45

18 50~150 5000

Hall Sensor/DC VH45

Per Customer Require-

ment

Standard


High Inertia, Concentrated Winding,Enhanced Life

21 84~250 5260

27 130~390 4840

68

35 200~600 1000

Hall Sensor/DC/Integrated

DriverVD68


ment

Integrated Driver


High Inertia, Concentrated Winding,Enhanced Life, BLDC

Motor with Built in Driver

49 250~750 2000

54 100~300 3500

100 2100~6300 630

PRODUCT SPECIFICATIONS

CLOSED LOOP BLDC

Size mm

Length mm

Holding Torque Range

mNm



SeriesConnector

(Maker)Features

Comparison Features

42

61 62.5~190 5000

Hall Sensor/DC/Encoder VH42


ment

STANDARD Reliable, Rohs, Continuous duty,

Concentrated Winding,En-hanced Life, Closed Loop

BLDC with Incremental Encoder,

Precise Motion

81 125~380 5000 STANDARD

101 185~560 5000 STANDARD

121 0250~750 5000 STANDARD

57

96 180~540 5000



ment

STANDARD Reliable, Rohs, Continuous duty,



Precise Motion

116 280~840 5000 STANDARD

136 380~1140 5000 STANDARD

80

86 900~2500 3000



ment

HIGH POWER HIGHER SIZE




Precise Motion107 1600~4500 3000 HIGH POWER

HIGHER SIZE

86

86 350~1050 3000



ment

HIGH POWER HIGHER SIZE




Precise Motion

99 700~2100 3000 HIGH POWER HIGHER SIZE

126 1400~4200 3000 HIGH POWER HIGHER SIZE


18 19

INNER ROTOR BLDC MOTORS VH SERIES

Size mm

Length mm

Holding Torque

Range mNm


RPM

Drive Method

Model Series

Connector (Maker)

Features Comparison Features

22

45 8~24 4600Hall Sensor/

DC VH22 Per Customer requirement

Small Size, Increased Torque

Enhanced Life, Continuous Duty,

Concentrated winding, Low Iron losses, reliable, Different

speed control range, High speed, High Efficient

70 20~60 3800 Small Size, Increased Torque

28

26 5~15 8000

Hall Sensor/DC VH28 Per Customer

requirement

Standard Enhanced Life, Continuous Duty,



38 14~42 10000 Standard

77 50~150 14000 Standard

33

38 22~66 3000


requirement




80 40~120 10000 High Speed, High Power

80 50~120 7800 High Speed, High Power

36

30 15~45 4800

Hall Sensor/DC

VH36 (Low Cost)

Per Customer requirement

Low cost Enhanced Life, Continuous Duty,



40 35~105 4800 Low cost

57 70~210 4500 Low cost

60 80~240 4800 Low cost

36

40 36~108 4800


requirement



speed control range, High speed, High Efficient55 50~150 4500 Standard

39 48 110~330 3200 Hall Sensor/DC VH39 Per Customer

requirement Standard




INNER ROTOR BLDC MOTORS VH SERIES (CONTINUED)

Size mm

Length mm

Holding Torque

Range mNm


RPM

Drive Method

Model Series

Connector (Maker)


42

60 68~204 5900

Hall Sensor/DC

VH42 (Low Cost)

Per Customer

requirement

Standard, Low cost




60 87.5~262 4450

Standard, High Power consump-

tion

42

30 20~60 4000

Hall Sensor/DC VH42

Per Customer

requirement




60 56~170 4200 Standard

85 150~450 4000 Standard

93 115~350 6300 Standard

42

40 70~210 3000

Hall Sensor/DC

VH 42(High Torque)

Per Customer

requirement

Low Speed, High Torque




60 160~480 3000 Low Speed, High Torque



42

40 64~190 3000

Hall Sensor/ DC

VH42 (Powerful magnet)

Per Customer

requirement

High torque, High Speed

Enhanced Life, Continuous Duty, Concentrated winding, Low Iron losses, reliable, Dif-ferent speed control range, High speed, High Efficient

60 170~510 3000 High torque, High Speed



42

40 62.5~190 4000

Hall Sensor/ DC

VH42 (Improved

Torque)

Per Customer

requirement

Standard Enhanced Life, Continuous Duty, Concentrated winding, Low Iron losses, reliable, Dif-ferent speed control range, High speed, High Efficient

60 125~380 4000 Standard

80 185~560 4000 Standard

100 250~750 4000 Standard


20 21

52

86 160~480 1500Hall Sensor/

DC VH52Per

Customer requirement

Low power Enhanced Life, Continuous Duty, Concentrated winding, Low Iron losses, reliable, Dif-ferent speed control range, High speed, High Efficient86 240~720 4000 High Power

57

53 200~600 4000

Hall Sensor/ DC

VH57 (Powerful Magnet)

Per Customer

requirement


73 400~1200 4000 Standard

93 600~1800 4000 Standard

113 800~2400 4000 Standard

57

76 300~900 3000Hall Sensor/

DC

VH57 (High

Torque)

Per Customer

requirement

High torque Enhanced Life, Continuous Duty, Concentrated winding, Low Iron losses, reliable, Dif-ferent speed control range, High speed, High Efficient

96 450~1350 3000 High torque

116 600~1800 3000 High torque

57

43 55~160 4000

Hall Sensor/DC

VH57 (Round

and Front Bell Op-

tion)

Per Customer

requirement

StandardEnhanced Life, Continuous

Duty, Concentrated winding, Low Iron losses, reliable, Dif-ferent speed control range, High speed, High Efficient

53 110~390 4000 Standard

73 220~700 4000 Standard

93 330~1000 4000 Standard

113 440~1270 4000 Standard

60

80 350~1000 3000

Hall Sensor/DC VH60

Per Customer

requirement

High power Enhanced Life, Continuous Duty, Concentrated winding, Low Iron losses, reliable, Dif-ferent speed control range, High speed, High Efficient

95 500~1500 14000 High power

150 1200~3600 12000 High power

80

84 900~2500 3000

Hall Sensor /DC VH80

Per Customer

requirement

standard Enhanced Life, Continuous Duty,



105 1700~5000 3000 standard

120 2200~6500 3000 standard

140 3000~8500 3000 standard


Size mm

Length mm

Holding Torque

Range mNm


RPM

Drive Method

Model Series

Connector (Maker)


86

64 400~1200 3000

Hall Sensor /DC

VH86 (High

Torque)

Per Customer

requirement

Bigger Size, High torque


77 800~2400 3000 Bigger Size, High torque



86

56 350~1050 3000

Hall Sensor /DC

VH86 (High

Torque)

Per Customer

requirement

Standard, Bigger size, High Torque


70 700~2100 3000 Standard, Bigger size, High Torque




90 80 400~1200 5300 Hall Sensor /DC VH90

Per Customer

requirementHigh Voltage


110

102 3000~9000 3000

Hall Sensor/DC VH110

Per Customer

requirement


119 4500~13500 3000 Standard



Size mm

Length mm

Holding Torque

Range mNm


RPM

Drive Method

Model Series

Connector (Maker)


22 23

125 64 6800~40000 480 Hall Sensor/DC VH125

Per Customer

requirementStandard




150

32 1000~3000 500

Hall Sensor/DC VH150

Per Customer

requirement

Round shape, Re-duced stack size




36 1800~5400 300 Round shape, Re-duced stack size

46 3600~10800 350 Round shape, Re-duced stack size


Size mm

Length mm

Holding Torque

Range mNm


RPM

Drive Method

Model Series

Connector (Maker)


SLOTLESS BLDC MOTORS SL SERIES

Size mm

Length mm

Holding Torque Range

mNm



SeriesConnector

(Maker)Features

Comparison Features

16

28 0.5~1.6 22000

Hall Sensor/DC SL16

Per Cus-tomer

require-ment

Standard High Speed, Enhanced Life, Small size

40 4~12 25000

56 9~27 25000

28

44 24~75 14000

Hall Sensor/DC SL28

Per Cus-tomer

require-ment

Standard High Speed, Enhanced Life, Reduced

thermal losses66 54~162 14000 Standard

114 460~1125 39000 High Power

34 124 380~1150 39000 Hall Sensor/DC SL34

Per Cus-tomer

require-ment

High PowerHigh Speed,

Enhanced Life, Reduced thermal losses

39 119 458~1375 42000 Hall Sensor/DC SL39

Per Cus-tomer

require-ment

High PowerHigh Speed,

Enhanced Life, Reduced thermal losses

45 125 480~1763 36000 Hall Sensor/DC SL45

Per Cus-tomer

require-ment

High Power, High torque

High Speed, Enhanced Life, Reduced

thermal losses

49

90 300~900 13000

Hall Sensor/DC

SL49 Per Cus-tomer

require-ment

High Power, High torque

High Speed, Enhanced Life, Reduced

thermal losses120 140~420 24000 SL120

180 200~600 32000 SL180


24 25


STEPPING MOTOR - 2 PHASE

Step angle deg./step

Size mm

Length mm

Holding Torque mN • m

Drive method

Model series

Connector (maker)


1.8

28 sq (NEMA 11)

32mm, 41mm, 51mm

65~120 Uni-PolarKV28 51065-8000

(Molex) Standard Enhanced Life, ROHS, Down Size85~165 Bi-Polar

39 sq (NEMA 16)

20.8mm, 27mm, 31mm

59~127 Uni-PolarKH39 800 ZHR-11 (JST) Standard Enhanced Life, ROHS,

Low Vibration, Small Lot78~157 Bi-Polar

42 sq (NEMA 17)

34mm, 38mm, 42mm, 48mm, 54mm

190~460 Uni-Polar

KH42 B900 PHR-11 (JST) Standard Enhanced Life, ROHS, Low Vibration, Small Lot250~570 Bi-Polar

34mm, 39mm, 42mm, 48mm

210~410 Uni-Polar

KV42 PHR-6 (JST) High Torque Enhanced Life, ROHS, Low Vibration260~520 Bi-Polar

34mm, 39mm, 42mm

330~460 Bi-Polar KF42 Large Rotor PHR-6 (JST) Ultra High

TorqueEnhanced Life, ROHS,

Down Size

56 sq (NEMA 23)

42mm, 54mm, 76mm

422~1324 Uni-PolarKH56 900 51004-1100

(Molex) StandardEnhanced Life, ROHS, Low Vibration, High

Torque, Small Lot490~1373 Bi-Polar

56 sq (NEMA 23)

40mm, 52mm, 74mm

(680~1970) Uni-PolarKH56 B900 XHP-6 (JST) High Torque Enhanced Life, ROHS,

Down Size(780~2270) Bi-Polar

60 sq (NEMA 24)

54mm, 65mm

(1450 ~1750)

Uni-PolarKH60 B900 Lead wire

Type Standard Enhanced Life, ROHS, High TorqueBi-Polar

86 sq (NEMA 34)

66mm, 74mm, 96mm, 127mm

2500~6700 Uni-Polar

KH86 Lead wire Type Standard Enhanced Life, ROHS,

High Torque, Small Lot3300~9300 Bi-Polar

4.09 42 sq (NEMA 17)

34mm, 39mm, 48mm

150~295 Uni-PolarKV42 PHR-6 (JST) High Speed,

High Power

Enhanced Life, ROHS, Low Vibration, Hight

Power, Down Size200~390 Bi-Polar

STEPPING MOTOR - 3 PHASE

Step angle deg./step

Size mm

Length mm

Holding Torque mN • m

Drive method

Model series

Connector (maker)


0.6

42 sq (NEMA 17)

34mm, 40mm, 48mm

90~200

Star

KT42 EHR-7 (JST) High PrecisionEnhanced Life, ROHS, Ultra Low Vibration,

Small Lot

60 sq (NEMA 24)

47mm, 58mm 440~600 KT60 XHP-7 (JST) High Precision

Enhanced Life, ROHS, Ultra Low Vibration,

Small Lot

1.2

35 sq (NEMA 14) 25mm 59 KT35 Lead wire

Type StandardEnhanced Life, ROHS, Ultra Low Vibration,

Small Lot

42 sq (NEMA 17)

34mm, 40mm, 48mm

70~280 KT42 EHR-7 (JST) StandardEnhanced Life, ROHS, Ultra Low Vibration,

Small Lot

60 sq (NEMA 24) 47mm 600 KT60 XHP-7 (JST) Standard


Small Lot

3.75 42 sq (NEMA 17)

34mm, 40mm, 48mm

55~180 KT42 EHR-7 (JST) High Speed, Low Vibration


Small Lot


26 27

FANS

AC DC

External Dimensions mm(inch) Model code

Max airflow(m3/min)

1 2 3 4 5 6 7 8 9 10 11 12 13 14

DC *60×25 (*2.4’’×1.0’’) TUDC

DC *80×25 (*3.2’’×1.0’’) PUDC

DC *92×25 (*3.6’’×1.0’’) D0925C

DC *92×32 (*3.6’’×1.3’’) KLDC

DC *92×38 (*3.6×1.5’’) G0938B

DC *120×25 (*4.7’’×1.0’’) (for low speed applications) D1225C

DC *120×25 (*4.7’’×1.0’’) (for high speed applications) D1225C

DC *120×38 (*4.7’’×1.5’’) CNDC

DC *120×38 (*4.7’’×1.5’’) D1238B

DC *120×38 (*4.7’’×1.5’’) G1238B

DC *127×38 (*5.0’’×1.5’’) D1338B

DC φ172×150×51 (φ6.8’’×6.0’’×2.0’’) D1751M

DC φ172×51 (φ6.8’’×2.0’’) D1751S

DC φ172×150×51 (φ6.8’’×6.0’’×2.0’’) G1751M

AC φ172×150×51 (φ6.8’’×6.0’’×2.0’’) MA

AC φ172×51 (φ6.8’’×2.0’’) PA


BLOWERS

AC DC

External Dimensions mm(inch) Model code

Max airflow(m3/min)

0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0~18 19

DC *48×25 (*1.9’’×1.0’’) E0525HE0525K

DC 51×53×15 (2.0’’×2.1’’×0.6’’) E0515H

DC 70×76×20 (2.8’’×3.0’’×0.8’’) E0720H

DC 72×75×20 (2.8’’×3.0’’×0.8’’) E0720L

DC *76×30 (*3.0’’×1.2’’) MBDC

DC 97×95×25 (3.8’’×3.7’’×1.0’’) E1027H

DC 97×95×33 (3.8’’×3.7’’×1.3’’) E1033H/L

DC 119×117×32 (4.7’’×4.6’’×1.3’’) E1232L

DC 126×127×31 (5.0’’×5.0’’×1.2’’) E1331K

DC 150×152×40 (5.9’’×6.0’’×1.6’’) E1540H

DC φ220×71 (φ8.7’’×2.8’’) E2271Z


1525 Kings Highway EastFairfield, CT 06824

Phone: 203.334.7537Fax: 203.334.7792

Email: [email protected]

Website: www.e-jpc.comISO 9001:2015 CERTIFIED

Precision Rotating Components

Precision Rotating Components• ISO 14971 Application of risk management to medical devices....

Documents

Transcript of Precision Rotating Components• ISO 14971 Application of risk management to medical devices....