PRECISION MILLED VINYL TILE
2
Meets ANSI/ESD S20.20 PRECISION MILLED VINYL TILE AmeriWorx® Series flooring that keeps you grounded Lifetime Conductivity Warranty Conductive and dissipative materials available in all styles. Spring Snow Black Rock Canyon *Warranty requires that the tile system is installed using StaticWorx approved materials and procedures *non-stock, minimums apply Conductive and Dissipative materials available.* Please note: Dissipative vinyl is a special order item. All AmeriWorx tiles can be installed with StaticWorx Pressure-sensitive Adhesive AMERIWORX CLASSICS AMERIWORX ROX Adirondack Ridge Grey Dolomite Shenandoah Valley Big Sky Country Rio Grande* Appalachian Spring* Blue Moraine* Acadia Blue Rocks* Living Coral* Black Hills* Great Plains* Boothbay Harbor* Morning Mist* Pearl* Amethyst* Sedona Sandstone* Static-free floors inspired by nature
Transcript of PRECISION MILLED VINYL TILE
Meets ANSI/ESD S20.20
PR E CI S I O N M I L L E D V I N Y L T I L EAmeriWor x® Series
flooring that keeps you grounded Lifetime Conductivity Warranty
Conductive anddissipative materials available in all styles.
Spring Snow Black Rock Canyon
*Warranty requires that the tile system is installedusing StaticWorx approved materials and procedures
*non-stock, minimums applyConductive and Dissipative materials available.* Please note: Dissipative vinyl is a special order item.
All AmeriWorx tiles can be installed with StaticWorx Pressure-sensitive Adhesive
AMERIWORX CLASSICS AMERIWORX ROX
Adirondack Ridge Grey Dolomite
Shenandoah Valley Big Sky Country Rio Grande* Appalachian Spring* Blue Moraine* Acadia Blue Rocks* Living Coral*
Black Hills* Great Plains* Boothbay Harbor* Morning Mist* Pearl* Amethyst* Sedona Sandstone*
Static-free floors inspired by nature
SPECIFICATIONS
INDUSTRY TESTS
Composition: Precision milled vinyl tile of high density resin with aconductive carbon matrix. Pre-consumer recycled content > 10%.
Electrical Performance: Lifetime Warranty
Free from defects in workmanship and materials: Lifetime Warranty
Sizes: 12” x 12”(24” x 24”, 36" x 36" available as custom sizes)
Maintenance: No wax
Adhesive and Spread Rate: Covers approx. 180 - 220 sq. ft/gal
Gauge: 3.0 mm
Grounding Material (Supplied with order): One 2”x 24” copper strip installed every 1,000 ft
Trowel Sizes: 1.6 x 1.6 mm (1/16”x 1/16”) Square Notch with 1.6 mm (1/16”) Flats
Category Test Method Results
Critical Radiant flux CRF (W/cm2) ASTM E-648 > 1.0 W/cm2
Chemical Resistance ASTM F-925 Excellent (Acids, Alkalis, Household Chemicals)
Electrical Resistance ASTM F-150 Point to Point & Point to Ground: 50,000 – 1,000,000 ohmsDissipative: 1,000,000 - < 1,000,000,000 ohms
Electrostatic Propensity AATCC-134 <12 volts
Fire Resistance (Steiner Tunnel) ASTM E-84 < 75 (Class 1)
Electrically Conductive Floor Coverings ANSI/UL 779 Meets UL Standard
Floor Materials – Resistive Characterization of Materials
ANSI/ESD.S7.1-2013Conductive: <1.0 x 106
Dissipative: ≥ 1.0 x 106 and < 1.0 x 109
Surpasses recommended standards of ANSI/ESD S20.20-2014
Floor Materials and Footwear-ResistanceMeasurement in Combination with a Person
ANSI/ESD STM97.1-2015< 3.5 X 107
Surpasses recommended standards of ANSI/ESD S20.20-2014
Floor Materials and Footwear- Voltage Measurement in Combination with a Person
ANSI/ESD STM97.2-2016<25 volts with conductive footwear
Surpasses recommended standards of ANSI/ESD S20.20-2014
Life Safety Code NFPA 101 Passes
Smoke Density ASTM E-662 ≤ 450
Solid Vinyl Floor Covering Materials ASTM F-1700 Conforms
Standard for Health Care Facilities NFPA 99 Passes
Static Decay, Method 4046 at 15% RH ASTM F-101C 5000 – 0 Volts in <0.01 sec.
Static Load ASTM F-970 < 0.001” RI @ 250 psi (1.125” diameter foot)0.005” RI @ 2,500 psi (0.5” diameter foot)
Lifetime Conductivity Warranty
ESD Messaging Tiles Available
PO Box 248, Waterbury Center, VT 05677 t: 617.923.2000 f: 617.467.5871 www.staticworx.com rev 09.11.20
BENEFITS
• Gap-Free Installation: Precision milled edges eliminate gaps in installation. High density resin eliminates tile shrink-age.
• Color runs through entire thickness of the tile so that deep scratches do not reveal a different color — helps hide scratches.
• Never requires wax: High density resin reduces maintenance, resists scuff marks and staining, and overall is easier to keep clean.
• Ideal for extreme duty manufacturing applications.
• Meets requirements for Buy Federal American as well as RoHS directive.
AMERIWORX VINYL TILE
California Department of Health CDPH/EHLB/Standard Method Version 1.1, 2010 (Emission testing method for CA Specification 01350)
• CALGreen, CA Code of Regulations Title 24, Part II, 2016, Sections 4.504.4/5.504.4.6: Resilient Flooring Systems
• ANSI/ASHRAE/USGBC/IES Standard 189.1-2017, Section 8.4.2.3: Floor Covering Materials
• USGBC LEED CI, NC, Schools, 2009, IEQ Credit 4.3: LEM - Flooring Systems
• USGBC LEED for Healthcare, 2009 (Feb 2011), IEQ Credit 4: LEM, Group 3 - Flooring
• Collaborative for High Performance Schools (CHPS) rating system, 2017 Criteria EQ2.2.3: Flooring Systems
• Green Guide for Healthcare, V2.2, 2007, EQ Credit 4.3: LEM - Flooring Systems
INDOOR AIR QUALITY INFORMATION
