Precision Machined Standards Aerospace - Bell Memphis · 2016-03-02 · tively priced contract...
Transcript of Precision Machined Standards Aerospace - Bell Memphis · 2016-03-02 · tively priced contract...
Precision Machined Standards for Aerospace___________________________________
AN, NAS & MS TurnbucklesSwage TerminalsQuick DisconnectsShacklesRod End FittingsForged ClevisesStrap Eyes & ForksCustom Machining
AS9100ISO 9001:2008
CERTIFIED
2 Visit our website at: WWW.BELLMEMPHIS.COM
“ Bell-Memphis is a third-generation family business
supplying precision-made parts to the aircraft
industry and other companies in the United States
and around the world. Our parts have been used
on aircraft since the B-17 Memphis Belle was flying
the skies over Europe in World War II.”
– Roy Bell, III, president
THE STORY THE STUKE LOCK CLIP-LOCKING TURNBUCKLE
In 1945, a government inspector/inventor named Stukenborg was inspecting the turnbuckle parts that R. E. Bell Manufacturing was preparing to ship to the government. He was curious about the elaborate methods that were used to safety wire the turnbuckle assemblies so that they would not lose tension during flight. Airplane mechanics had to learn the “Double Spiral Safety Wrap” method to securely safety wire the critical airplane flight controls. The safety wiring took a considerable amount of time and the assembly was often in the most difficult-to-reach locations on the airplane.
The inventor’s mind of Mr. Stukenborg imagined that if a slot were milled through the threads on both the male and female parts, and if the slots were then lined up, a pin could be inserted into the channel that would prevent the parts from rotating. The Stuke Lock clip-locking turnbuckle was his time-saving solution.
It took roughly the life of the patent for the invention to become widely accepted by the aviation industry. Eventually the concept
was incorporated into the Military Standards. Bell-Memphis was put on the government QPL (Qualified Producers List) of companies that were authorized to manufacture this critical flight component. The patented locking clip was not a big money maker but it helps explain why a small manufacturer in Memphis, Tennessee stayed in the aerospace manufacturing business for so many years.
3For inquiries call: (800) 922-1650 or email: [email protected]
TABLE OF CONTENTS
TERMINALS 4-6, 10-11, 16-18
TURNBUCKLES 7-9
FORGED CLEVISES 12
SHACKLES 13
ROD END FITTINGS 14
QUICK DISCONNECTS 15
COMPLETE PART LISTING 19
COMPANY HISTORY
CONTRACT MANUFACTURING
In 1942 Roy Bell, Sr. founded Bell-Memphis, Incorporated (originally R. E. Bell Manufacturing). Bell-Memphis grew from a small wartime contract manufacturing shop to become a long-term supplier of aircraft control cable fittings. The patented turnbuckle locking clip we helped develop became an aircraft industry standard and is still used today on aircraft from small private planes to the largest jet airliners.
Bell-Memphis continues to be a key supplier to the aircraft control cable fittings industry. Bell-Memphis is on a government QPL (Qualified Products List) to produce MS (Military Standard) control cable parts whose drawings are controlled
In addition to manufacturing the standard AN, MS, and NAS aerospace standards, Bell-Memphis offers its capabilities as a contract manufacturer to produce parts to customer drawings.
By leveraging our manufacturing engineering talents, our aerospace AS9100 quality system, our network of certified vendors, our capital investments in machinery, and our experienced employees, Bell-Memphis has been providing customers with high quality products, reliable delivery, and competi-tively priced contract manufacturing.
Our manufacturing capabilities consist of CNC Swiss screw machines, Y-axis lathes, 4-axis vertical machining centers, thread roller machines, centerless grinders, four-slide wire forming, broaching, laser marking, in-house passivation, bead blasting, and annealing. Our shop has experience machining all types of stainless steels, carbon steels, brass, aluminum, and titanium.
We also have an extensive network of certified vendors for special machining processes, finishing processes, and inspection processes. Most of our vendors have industry certifications such as NADCAP or are on a prime aerospace contractor approval list. Bell-Memphis has the resources, connections, and experience to deliver a finished part meeting all the drawing requirements.
by the US Military. The standard products consist of swaged wire rope fittings such as ball ends, eyes, and forks. The turnbuckle parts, which are used for adjusting control cable tension, consist of barrels, forks, eyes, swaged terminals, and the locking clip.
Over the years, Bell-Memphis has expanded the product offering to include other government and industry standard parts to complement the control cable fittings. Bell-Memphis’ specialty is converting bar stock into high precision aerospace products.
Bell-Memphis is an AS9100 certified business and operates at a single manufacturing plant located at 1650 Channel Avenue in Memphis, Tennessee. The company is housed in a 50,000 square foot plant with approximately 40 employees. When customers call Bell-Memphis, they speak directly to an experienced employee who understands their needs.
AS9100ISO 9001:2008
CERTIFIED
4 Visit our website at: WWW.BELLMEMPHIS.COM
SWAGE TERMINALS
Terminal, Wire Rope, Swaging, Fork End
L
K
ØA
ØN
ØU
F G
ØD
W
MS20658Military Standard
MIL-DTL-781Procurement Specification
DASH NO.
APPLICABLE BEARING PART NUMBER REF.
WIRE ROPE DIA.
NOMINAL
MIN. BREAKING STRENGTH ØA ØD F G K L ØN ØU W
-3 AN200KP3 3/32 920 0.218 0.190 0.500 0.302 1.062 2.531 0.109 0.750 0.031
-4 AN200KP4 1/8 2,000 0.250 0.250 0.750 0.489 1.188 3.062 0.141 0.875 0.047
-5 AN200KP4 5/32 2,800 0.297 0.250 0.750 0.489 1.188 3.313 0.172 0.875 0.047
-6 AN200KP4 3/16 4,200 0.359 0.250 0.750 0.489 1.188 3.562 0.203 0.875 0.047
-7 AN200KP5 3/16 4,200 0.359 0.313 0.813 0.563 1.313 3.687 0.203 1.000 0.047
Over the years, Bell-Memphis has expanded the prod-
uct offering to include other government and industry
standard parts to complement the control cable fit-
tings. Bell-Memphis’ specialty is converting bar stock
into high precision aerospace products.
5For inquiries call: (800) 922-1650 or email: [email protected]
SWAGE TERMINALS
Ball End, Wire Rope, Swaging, Double Shank
Ball End, Wire Rope, Swaging, Single Shank
BEFORE SWAGING
L
D
ØB
E
ØA ØN
D
E
L
BEFORE SWAGING
ØB N ØA
MS20663Military Standard
MS20664Military Standard
MIL-DTL-781Procurement Specification
MIL-DTL-781Procurement Specification
DASH NO.WIRE ROPE
DIA. NOMINALMIN. BREAKING
STRENGTH ØA ØB DE
RADIUS REF. L ØN
C2 1/16 480 0.127 0.207 0.114 0.082 0.362 0.073C3 3/32 920 0.163 0.277 0.152 0.110 0.525 0.104C4 1/8 2,000 0.218 0.345 0.189 0.137 0.688 0.139C5 5/32 2,800 0.254 0.419 0.227 0.165 0.850 0.169C6 3/16 4,200 0.293 0.487 0.264 0.192 1.012 0.201C7 7/32 5,600 0.347 0.555 0.302 0.220 1.175 0.233C8 1/4 7,000 0.401 0.624 0.339 0.247 1.337 0.264C9 9/32 8,000 0.439 0.694 0.377 0.275 1.497 0.297
C10 5/16 9,800 0.475 0.763 0.414 0.302 1.664 0.328
DASH NO.WIRE ROPE
DIA. NOMINALMIN. BREAKING
STRENGTH ØA ØB DE
RADIUS REF. L N
C2 1/16 480 0.132 0.212 0.114 0.082 0.268 0.073C3 3/32 920 0.168 0.282 0.152 0.110 0.384 0.104C4 1/8 2,000 0.223 0.350 0.189 0.137 0.500 0.139C5 5/32 2,800 0.259 0.424 0.227 0.165 0.616 0.169C6 3/16 4,200 0.298 0.492 0.264 0.192 0.730 0.201C7 7/32 5,600 0.352 0.560 0.302 0.220 0.846 0.233C8 1/4 7,000 0.406 0.629 0.339 0.247 0.962 0.264C9 9/32 8,000 0.444 0.699 0.378 0.275 1.078 0.297
C10 5/16 9,800 0.480 0.768 0.414 0.302 1.193 0.328BM2490-C12 3/8 14,400 0.550 0.903 0.486 0.375 1.425 0.407
6 Visit our website at: WWW.BELLMEMPHIS.COM
SWAGE TERMINALS
Terminal, Wire Rope, Swaging, Fork End
Terminal, Wire Rope, Swaging, Eye End
L
H
ØU
ØAF G
ØN
ØD
C
L
ØU
D
ATJ
N
MS20667Military Standard
MS20668Military Standard
MIL-DTL-781Procurement Specification
MIL-DTL-781Procurement Specification
DASH NO.
WIRE ROPE DIA. NOMINAL
MIN. BREAKING STRENGTH ØA ØD F G H L ØN ØU
2 1/16 480 0.160 0.190 0.218 0.093 0.500 1.572 0.078 0.344
3 3/32 920 0.218 0.190 0.254 0.108 0.670 1.945 0.109 0.438
4 1/8 2,000 0.250 0.190 0.383 0.195 0.735 2.352 0.141 0.547
5 5/32 2,800 0.297 0.250 0.406 0.202 0.800 2.655 0.172 0.688
6 3/16 4,200 0.359 0.313 0.543 0.260 0.880 3.071 0.203 0.781
7 7/32 5,600 0.427 0.313 0.625 0.296 0.970 3.440 0.234 0.906
8 1/4 7,000 0.494 0.375 0.688 0.313 1.070 3.806 0.265 0.969
9 9/32 8,000 0.563 0.438 0.719 0.327 1.170 4.120 0.297 1.156
10 5/16 9,800 0.635 0.438 0.765 0.348 1.268 4.438 0.328 1.265
12 3/8 14,400 0.703 0.500 0.830 0.380 1.525 5.333 0.390 1.500
14 7/16 17,600 0.781 0.562 0.830 0.380 1.776 6.102 0.468 1.750
16 1/2 22,800 0.844 0.625 1.035 0.473 1.903 6.938 0.531 1.875
18 9/16 28,500 0.984 0.750 1.241 0.567 2.375 7.750 0.594 2.340
20 5/8 35,000 1.109 0.875 1.351 0.663 2.770 8.673 0.656 2.730
24 3/4 49,600 1.359 0.875 1.451 0.663 2.791 9.740 0.781 2.750
28 7/8 66,500 1.593 1.000 1.656 0.756 3.170 10.802 0.921 3.125
32 1 85,400 1.812 1.125 1.864 0.851 3.562 12.312 1.046 3.510
DASH NO.
WIRE ROPE DIA. NOMINAL
MIN. BREAKING STRENGTH A C D J L N T ØU
2 1/16 480 0.160 0.523 0.190 0.088 1.631 0.078 0.136 0.359
3 3/32 920 0.218 0.707 0.190 0.103 2.043 0.109 0.190 0.438
4 1/8 2,000 0.250 0.738 0.190 0.190 2.337 0.141 0.219 0.500
5 5/32 2,800 0.297 0.831 0.250 0.197 2.684 0.172 0.250 0.640
6 3/16 4,200 0.359 0.903 0.313 0.255 3.019 0.203 0.313 0.781
7 7/32 5,600 0.427 1.007 0.313 0.291 3.382 0.234 0.375 0.813
8 1/4 7,000 0.494 1.133 0.375 0.307 3.763 0.265 0.438 0.968
9 9/32 8,000 0.563 1.257 0.438 0.322 4.153 0.297 0.500 1.109
10 5/16 9,800 0.635 1.373 0.438 0.343 4.546 0.328 0.563 1.218
12 3/8 14,400 0.703 1.688 0.500 0.375 5.562 0.390 0.625 1.500
14 7/16 17,600 0.781 1.968 0.562 0.375 6.398 0.468 0.688 1.750
16 1/2 22,800 0.844 2.115 0.625 0.468 7.323 0.531 0.750 1.875
18 9/16 28,500 0.984 2.625 0.750 0.562 8.185 0.594 0.875 2.340
20 5/8 35,000 1.109 3.062 0.875 0.657 9.167 0.656 1.000 2.730
24 3/4 49,600 1.359 3.093 0.875 0.657 10.328 0.781 1.250 2.750
28 7/8 66,500 1.593 3.515 1.000 0.750 11.530 0.921 1.437 3.125
32 1 85,400 1.812 3.937 1.125 0.844 13.156 1.046 1.625 3.510
7For inquiries call: (800) 922-1650 or email: [email protected]
TURNBUCKLES
Body, Turnbuckle, Clip Locking
Clip, Locking, Turnbuckle
L
PTHREAD RIGHT HAND
TO CENTERTHREAD LEFT HAND
TO CENTER
B DE
D
B
C
F
H
R
R RG
A
MS21251Military Standard
NAS649 & AN155
MS21256Military Standard
NAS651
MIL-DTL-8878Procurement Specification
MIL-DTL-8878Procurement Specification
DASH NO.STEEL
DASH NO.BRASS
DASH NO.ALUMINUM
WIRE ROPE DIA. NOMINAL
MIN. BREAKING STRENGTH
THREAD T UNF-3B L B D E P
APPLICABLE LOCKING CLIP - MS21256-
2S B2S A2S 1/16 800 #6-40 2.250 0.250 0.219 0.188 0.125 12L B2L A2L 1/16 800 #6-40 4.000 0.250 0.219 0.188 0.125 23S B3S A3S 3/32 1,600 #10-32 2.250 0.344 0.281 0.250 0.125 13L B3L A3L 3/32 1,600 #10-32 4.000 0.344 0.281 0.250 0.125 25S B5S A5S 5/32 3,200 1/4-28 2.250 0.438 0.391 0.328 0.125 15L B5L A5L 5/32 3,200 1/4-28 4.000 0.438 0.391 0.328 0.125 26S B6S A6S 3/16 4,600 5/16-24 2.250 0.500 0.438 0.406 0.125 16L B6L A6L 3/16 4,600 5/16-24 4.000 0.500 0.438 0.406 0.125 28L B8L A8L 1/4 8,000 3/8-24 4.000 0.625 0.594 0.469 0.125 29L B9L A9L 9/32 12,750 7/16-20 4.250 0.750 0.688 0.563 0.188 310L B10L A10L 5/16 17,500 1/2-20 4.250 0.875 0.813 0.625 0.188 3
DASH NO. A B C D F G H R RADIUS
1 0.965 1.115 0.150 1.078 0.125 0.300 0.165 0.0322 1.875 2.000 0.150 1.955 0.125 0.315 0.180 0.0323 2.045 2.140 0.215 2.015 0.150 0.430 0.275 0.032
8 Visit our website at: WWW.BELLMEMPHIS.COM
TURNBUCKLES
Clevis End, Turnbuckle
Clevis End for Bearing, Turnbuckle
Z
HØCY
FG
RH OR LH THREAD
ØD
Z
H
FG
ØD
Y
ØC
MS21252Military Standard
NAS645 & AN161
MS21253Military Standard
NAS646 & AN162
MIL-DTL-8878Procurement Specification
MIL-DTL-8878Procurement Specification
RH LH
WIRE ROPE DIA. NOMINAL
MIN. BREAKING STRENGTH
THREAD T UNF-3A ØC ØD F G H Y Z
-2RS 2LS 1/16 800 #6-40 0.094 0.190 0.250 0.109 0.375 0.375 1.500
-3RS -3LS 3/32 1,600 #10-32 0.133 0.190 0.319 0.156 0.375 0.500 1.625
-3RL -3LL 3/32 1,600 #10-32 0.133 0.190 0.319 0.156 0.375 0.500 2.500
-4RS -4LS 1/8 2,200 1/4-28 0.189 0.190 0.383 0.195 0.531 0.563 1.844
-4RL -4LL 1/8 2,200 1/4-28 0.189 0.190 0.383 0.195 0.531 0.563 2.734
-5RS -5LS 5/32 3,200 1/4-28 0.189 0.250 0.452 0.218 0.531 0.625 1.844
-5RL -5LL 5/32 3,200 1/4-28 0.189 0.250 0.452 0.218 0.531 0.625 2.734
-6RS -6LS 3/16 4,600 5/16-24 0.243 0.313 0.547 0.250 0.656 0.750 2.031
-6RL -6LL 3/16 4,600 5/16-24 0.243 0.313 0.547 0.250 0.656 0.750 2.906
-8RL -8LL 1/4 8,000 3/8-24 0.306 0.375 0.687 0.312 0.875 0.875 3.188
-9RL -9LL 9/32 12,500 7/16-20 0.362 0.438 0.750 0.375 1.000 1.000 3.438
-10RL -10LL 5/16 17,500 1/2-20 0.425 0.500 0.844 0.437 1.188 1.000 3.688
R. HAND L. HANDWIRE ROPE DIA.
NOMINAL
MIN. BREAKING STRENGTH
MATCHES BEARING NUMBER REF.
THREAD T UNF-3A
-3RS -3LS 3/32 1,600 MS27640- KP3 #10-32
-3RL -3LL 3/32 1,600 MS27640- KP3 #10-32
-4RS -4LS 1/8 2,200 MS27640- KP4 1/4-28
-4RL -4LL 1/8 2,200 MS27640- KP4 1/4-28
-5RS -5LS 5/32 3,200 MS27640- KP4 5/16-24
-5RL -5LL 5/32 3,200 MS27640- KP4 5/16-24
-6RS -6LS 3/16 4,600 MS27640-KP5 5/16-24
-6RL -6LL 3/16 4,600 MS27640-KP5 5/16-24
ØC ØD F G H Y Z
0.139 0.190 0.500 0.312 1.062 0.500 2.312
0.139 0.190 0.500 0.312 1.062 0.500 3.187
0.195 0.250 0.750 0.500 1.188 0.625 2.562
0.195 0.250 0.750 0.500 1.188 0.625 3.437
0.249 0.250 0.750 0.500 1.188 0.750 2.687
0.249 0.250 0.750 0.500 1.188 0.750 3.562
0.249 0.313 0.813 0.563 1.313 0.750 2.750
0.249 0.313 0.813 0.563 1.313 0.750 3.625
DASH NO. & THREAD
DASH NO. & THREAD
9For inquiries call: (800) 922-1650 or email: [email protected]
TURNBUCKLES
Eye End for Pin, Turnbuckle
Eye End for Wire Rope, Turnbuckle
ØD
Y
Z
ØS
J
ØC
RH OR LH THREAD
RH OR LH THREAD
S
ØA
Z
Y
C
J
MS21254Military Standard
NAS648A & AN165
MS21255Military Standard
NAS647 & AN170
MIL-DTL-8878Procurement Specification
MIL-DTL-8878Procurement Specification
RIGHT HAND LEFT HANDWIRE ROPE
DIA. NOMINALMIN. BREAKING
STRENGTHTHREAD T UNF-3A ØC ØD J Y ØS Z
-2RS -2LS 1/16 800 #6-40 0.094 0.190 0.125 0.375 0.375 1.500-2RL -2LL 1/16 800 #6-40 0.094 0.190 0.125 0.375 0.375 2.375-3RS -3LS 3/32 1,600 #10-32 0.133 0.190 0.188 0.500 0.500 1.625-3RL -3LL 3/32 1,600 #10-32 0.133 0.190 0.188 0.500 0.500 2.500-5RS -5LS 5/32 3,200 1/4-28 0.189 0.250 0.219 0.625 0.625 1.750-5RL -5LL 5/32 3,200 1/4-28 0.189 0.250 0.219 0.625 0.625 2.625-6RS -6LS 3/16 4,600 5/16-24 0.243 0.313 0.281 0.750 0.688 1.875-6RL -6LL 3/16 4,600 5/16-24 0.243 0.313 0.281 0.750 0.688 2.750-8RL -8LL 1/4 8,000 3/8-24 0.306 0.375 0.328 0.875 0.875 2.875-9RL -9LL 9/32 12,500 7/16-20 0.362 0.438 0.375 1.000 1.063 3.375
-10RL -10LL 5/16 17,500 1/2-20 0.425 0.500 0.469 1.000 1.188 3.625
RIGHT HAND LEFT HANDWIRE ROPE
DIA. NOMINALMIN. BREAKING
STRENGTHTHREAD T UNF-3A ØA C J S Y Z
-2RS -2LS 1/16 800 #6-40 0.188 0.094 0.125 0.375 0.375 1.500-2RL -2LL 1/16 800 #6-40 0.188 0.094 0.125 0.375 0.375 2.375-3RS -3LS 3/32 1,600 #10-32 0.219 0.133 0.188 0.500 0.500 1.625-3RL -3LL 3/32 1,600 #10-32 0.219 0.133 0.188 0.500 0.500 2.500-5RS -5LS 5/32 3,200 1/4-28 0.281 0.189 0.219 0.625 0.625 1.750-5RL -5LL 5/32 3,200 1/4-28 0.281 0.189 0.219 0.625 0.625 2.625-6RS -6LS 3/16 4,600 5/16-24 0.313 0.243 0.281 0.688 0.750 1.875-6RL -6LL 3/16 4,600 5/16-24 0.313 0.243 0.281 0.688 0.750 2.750-8RL -8LL 1/4 8,000 3/8-24 0.375 0.306 0.328 0.875 0.875 2.875-9RL -9LL 9/32 12,500 7/16-20 0.469 0.362 0.375 1.063 1.000 3.375
-10RL -10LL 5/16 17,500 1/2-20 0.563 0.425 0.469 1.188 1.000 3.625
DASH NO. & THREAD
DASH NO. & THREAD
10 Visit our website at: WWW.BELLMEMPHIS.COM
SWAGE TERMINALS
Terminal, Wire Rope, Stud
ØA
EØA
THREAD B
ØC ØN
ØV
L
Y W
ØF
MS21259Military Standard
MIL-DTL-781Procurement Specification
R. HAND L. HAND
WIRE ROPE DIA. NOMINAL
MIN. BREAKING STRENGTH
THREAD B UN-3A UNF-3A ØA ØC E ØF L ØN ØV W Y
-2RH -2LH 1/16 480 # 6-40 0.160 0.121 0.156 0.188 2.473 0.078 0.063 1.174 1.045
-3RH -3LH 3/32 920 #10-32 0.218 0.169 0.187 0.250 2.879 0.109 0.063 1.411 1.204
-4RH -4LH 1/8 2,000 1/4-28 0.250 0.226 0.250 0.313 3.333 0.141 0.063 1.682 1.376
-5RH -5LH 5/32 2,800 1/4-28 0.297 0.226 0.250 0.313 3.627 0.172 0.063 1.958 1.376
-6RH -6LH 3/16 4,200 5/16-24 0.359 0.285 0.312 0.375 4.002 0.203 0.098 2.237 1.453
-7RH -7LH 7/32 5,600 3/8-24 0.427 0.347 0.375 0.438 4.516 0.234 0.098 2.518 1.625
-8RH -8LH 1/4 7,000 3/8-24 0.494 0.347 0.438 0.500 4.937 0.265 0.098 2.784 1.750
-9RH -9LH 9/32 8,000 7/16-20 0.563 0.405 0.563 0.625 5.391 0.297 0.098 3.076 1.875
-10RH -10LH 5/16 9,800 1/2-20 0.635 0.467 0.625 0.688 5.844 0.328 0.098 3.326 2.000
-12RH -12LH 3/8 14,400 9/16-18 0.703 0.529 0.688 0.750 6.656 0.390 0.098 3.828 2.250
-14RH -14LH 7/16 17,600 5/8-18 0.781 0.592 0.750 0.812 7.437 0.468 0.098 4.375 2.500
-16RH -16LH 1/2 22,800 5/8-18 0.844 0.592 0.812 0.875 8.187 0.531 0.125 5.093 2.500
-18RH -18LH 9/16 28,500 3/4-16 0.984 0.717 0.875 1.000 9.125 0.594 0.125 5.468 3.000
-20RH -20LH 5/8 35,000 7/8-14 1.109 0.842 1.000 1.125 10.375 0.656 0.125 6.093 3.500
-24RH -24LH 3/4 49,600 1-12 1.359 0.967 1.125 1.438 12.063 0.781 0.125 7.188 4.000
-28RH -28LH 7/8 66,500 1-1/8-12 1.593 1.092 1.437 1.625 13.226 0.921 0.125 7.846 4.500
-32RH -32LH 1 85,400 1-1/4-12 1.812 1.217 1.625 1.812 14.969 1.046 0.125 9.000 5.000
DASH NO. & THREAD
11For inquiries call: (800) 922-1650 or email: [email protected]
SWAGE TERMINALS
Terminal, Wire Rope, Stud
EØA
F
THREAD B
W
LY
ØC
V
N
ØA
MS21260Military Standard
NAS650 & AN669
MIL-DTL-781Procurement Specification
R. HAND L. HAND
WIRE ROPE DIA. NOMINAL
MIN. BREAKING STRENGTH
THREAD B UN-3A UNF-3A ØA ØC E F L N V W Y
L2RH L2LH 1/16 480 # 6-40 0.160 0.092 0.156 0.188 3.491 0.078 0.063 1.174 0.375
S2RH S2LH 1/16 480 # 6-40 0.160 0.092 0.156 0.188 2.616 0.078 0.063 1.174 0.375
L3RH L3LH 3/32 920 #10-32 0.218 0.133 0.187 0.250 3.738 0.109 0.063 1.411 0.500
S3RH S3LH 3/32 920 #10-32 0.218 0.133 0.187 0.250 2.863 0.109 0.063 1.411 0.500
L4RH L4LH 1/8 2,000 1/4-28 0.250 0.195 0.250 0.313 4.020 0.141 0.098 1.682 0.563
S4RH S4LH 1/8 2,000 1/4-28 0.250 0.195 0.250 0.313 3.145 0.141 0.098 1.682 0.563
L5RH L5LH 5/32 2,800 1/4-28 0.297 0.195 0.250 0.313 4.314 0.172 0.098 1.958 0.625
S5RH S5LH 5/32 2,800 1/4-28 0.297 0.195 0.250 0.313 3.439 0.172 0.098 1.958 0.625
L6RH L6LH 3/16 4,200 5/16-24 0.359 0.245 0.312 0.375 4.612 0.203 0.098 2.237 0.750
S6RH S6LH 3/16 4,200 5/16-24 0.359 0.245 0.312 0.375 3.737 0.203 0.098 2.237 0.750
-7RH -7LH 7/32 5,600 3/8-24 0.427 0.306 0.375 0.438 4.914 0.234 0.098 2.518 0.875
-8RH -8LH 1/4 7,000 3/8-24 0.494 0.306 0.438 0.500 5.218 0.265 0.098 2.784 0.875
-9RH -9LH 9/32 8,000 7/16-20 0.563 0.361 0.563 0.625 5.542 0.297 0.098 3.076 1.000
-10RH -10LH 5/16 9,800 1/2-20 0.635 0.406 0.625 0.688 5.875 0.328 0.098 3.326 1.000
-12RH -12LH 3/8 14,400 9/16-18 0.703 0.476 0.688 0.750 6.608 0.404 0.098 3.828 1.125
-14RH -14LH 7/16 17,600 5/8-18 0.781 0.538 0.750 0.812 7.468 0.468 0.098 4.375 1.250
-16RH -16LH 1/2 22,800 5/8-18 0.844 0.538 0.812 0.875 8.718 0.531 0.125 5.093 1.250
-18RH -18LH 9/16 28,500 3/4-16 0.984 0.654 0.875 1.000 9.188 0.594 0.125 5.468 1.500
-20RH -20LH 5/8 35,000 7/8-14 1.109 0.768 1.000 1.125 10.469 0.656 0.125 6.093 1.750
-24RH -24LH 3/4 49,600 1-12 1.359 0.893 1.125 1.438 12.188 0.781 0.125 7.188 2.000
-28RH -28LH 7/8 66,500 1-1/8-12 1.593 1.002 1.438 1.625 12.851 0.921 0.125 7.846 2.000
-32RH -32LH 1 85,400 1-1/4-12 1.812 1.128 1.625 1.812 14.624 1.046 0.125 9.000 2.250
DASH NO. & THREAD
12 Visit our website at: WWW.BELLMEMPHIS.COM
FORGED CLEVISES
Clevis, Rod End, Adjusting, Wide & Narrow Forks
Clevis, Rod End, Plain, Wide & Narrow Forks
Clevis, Engine Control Rod, Adjustable
1.000 1.000
.266 .141
.500 .312
ØB
.06
.84ØB
1.00 .141
.313.500 .266
“T” THREAD
1.0001.000
1.8751.230
.312.141
H
BE
ØA
MS27975Military Standard
MS27976Military Standard
NAS170Military Standard
MIL-DTL-45918Procurement Specification
MIL-DTL-45918Procurement Specification
WIDE
NAS170-1, -3, -5 & -7
NARROW
NAS170-2, -4, -6 & -8
DASH NO. TYPE OF FORK ØB WEIGHT MIN. AXIAL LOAD
1 WIDE 0.250 0.051 3,8002 NARROW 0.250 0.051 2,8503 WIDE 0.188 0.052 4,7004 NARROW 0.188 0.052 3,500
DASH NO.CAD
PLATE
DASH NO.
PLAINTYPE OF
FORK ØA B E H WEIGHT
MIN. AXIAL LOAD
1 21 WIDE 0.250 0.305 0.188 0.375 0.046 3,800
2 22 NARROW 0.250 0.305 0.188 0.375 0.046 2,850
3 23 WIDE 0.188 0.305 0.188 0.375 0.047 4,700
4 24 NARROW 0.188 0.305 0.188 0.375 0.047 3,500
5 25 WIDE 0.250 0.242 0.125 0.375 0.046 3,800
6 26 NARROW 0.250 0.242 0.125 0.375 0.046 2,850
7 27 WIDE 0.188 0.242 0.125 0.375 0.047 4,700
8 28 NARROW 0.188 0.242 0.125 0.375 0.047 3,500
9 29 WIDE 0.250 0.430 0.281 0.500 0.048 3,800
10 30 NARROW 0.250 0.430 0.281 0.500 0.048 2,850
11 31 WIDE 0.188 0.430 0.281 0.500 0.049 4,700
12 32 NARROW 0.188 0.430 0.281 0.500 0.049 3,500
DASH NO. TYPE OF FORK ØB T WEIGHT
1 WIDE 0.250 .3125-24 UNJF-3B 0.0672 NARROW 0.250 .3125-24 UNJF-3B 0.0633 WIDE 0.188 .3125-24 UNJF-3B 0.0694 NARROW 0.188 .3125-24 UNJF-3B 0.0645 WIDE 0.250 .3750-24 UNJF-3B 0.0606 NARROW 0.250 .3750-24 UNJF-3B 0.0557 WIDE 0.188 .3750-24 UNJF-3B 0.0618 NARROW 0.188 .3750-24 UNJF-3B 0.056
13For inquiries call: (800) 922-1650 or email: [email protected]
SHACKLES
Shackle-Cable, Aircraft
Shackle-Cable, Aircraft
A
H
D
B
N
JØM
ØD
H
F
G
N
ØA
AN115Military Standard
MS20115Military Standard
MIL-DTL-5675Procurement Specification
MIL-DTL-5675Procurement Specification
DASH NO.SHACKLE
STRENGTH A B D H J ØM N
8 800 0.188 0.109 1/4 11/34 11/64 1/4 9/1616 1,600 0.188 0.150 5/16 11/34 11/64 1/4 9/1621 2,100 0.188 0.150 5/16 11/34 11/64 1/4 9/1632 3,200 0.250 0.203 7/16 1/4 1/4 3/8 3/446 4,600 0.313 0.203 1/2 9/32 9/32 7/16 13/1661 6,100 0.375 0.203 9/16 5/16 5/16 1/2 7/880 8,000 0.375 0.266 9/16 7/16 3/8 7/16 1
125 12,500 0.438 0.344 23/32 19/32 15/32 5/8 1-1/8175 17,500 0.550 0.406 13/16 11/16 9/16 5/8 1-1/4
DASH NO.WIRE ROPE
DIA. NOMINALMIN. BREAKING
STRENGTH ØA ØD F G H N
2 1/16 480 0.188 0.190 0.218 0.093 0.156 0.5623 3/32 920 0.219 0.190 0.254 0.108 0.156 0.5624 1/8 2,000 0.250 0.190 0.383 0.195 0.250 0.5625 5/32 2,800 0.281 0.250 0.406 0.202 0.250 0.7506 3/16 4,200 0.375 0.313 0.543 0.260 0.312 0.8127 7/32 5,600 0.406 0.313 0.625 0.296 0.344 0.8758 1/4 7,000 0.438 0.375 0.688 0.313 0.406 1.0009 9/32 8,000 0.500 0.438 0.719 0.327 0.438 1.00010 5/16 9,800 0.594 0.438 0.765 0.348 0.469 1.12512 3/8 14,000 0.625 0.500 0.830 0.380 0.562 1.250
14 Visit our website at: WWW.BELLMEMPHIS.COM
Rod End-Threaded, Aircraft
Terminal-Threaded Clevis Type Tie Rod
THREAD
.047 RAD
D
E .549.579
F
L
ØA
ØC
ØB
EXTENT OF DRILL A
.046INSPECTION HOLE
B
Z
Y
H
ØM
T
FG
ØA
ØD
ROD END FITTINGS
AN490Military Standard
AN665Military Standard
MIL-C-45918Procurement Specification
MIL-DTL-5683Procurement Specification
DASH NO. THREAD T TUBE SIZE ØA ØB ØC D E F L
5 1/4-24UNF-3A 5/16 X .035 0.312 0.242 0.125 0.937 1.000 1.125 1.7506 1/4-24UNF-3A 3/8 X .035 0.375 0.305 0.185 0.937 1.000 1.125 1.7508 1/4-24UNF-3A 1/2 X .035 0.500 0.430 0.281 0.937 1.000 1.125 1.750
10 5/16-24UNF-3A 5/8 X .035 0.625 0.555 0.375 1.000 1.062 1.168 1.81211 5/16-24UNF-3A 3/4 X .035 0.750 0.650 0.500 1.000 1.062 1.168 1.81213 3/8-24UNF-3A 5/8 X .035 0.625 0.555 0.375 1.000 1.062 1.168 1.81214 3/8-24UNF-3A 3/4 X .035 0.750 0.680 0.500 1.000 1.062 1.168 1.81215 5/16-24UNF-3A 1/2 X .058 0.500 0.372 0.250 1.000 1.062 1.168 1.81216 3/8-24UNF-3A 1/2 X .058 0.500 0.372 0.250 1.000 1.062 1.168 1.812
DASH NO. RATED STRENGTH TAP T ØA B ØD F G H ØM Y Z
10 1,200 6-40 0.147 1.313 0.190 0.250 0.109 0.375 0.250 0.250 0.31321 2,400 10-32 0.199 1.531 0.190 0.313 0.150 0.469 0.281 0.313 0.37534 4,200 1/4-28 0.261 1.813 0.250 0.438 0.203 0.625 0.375 0.438 0.50046 4,600 5/16-24 0.323 1.875 0.313 0.500 0.203 0.656 0.438 0.563 0.62561 6,900 5/16-24 0.323 2.000 0.375 0.563 0.203 0.844 0.453 0.563 0.62580 10,000 3/8-24 0.386 2.250 0.375 0.625 0.266 0.875 0.547 0.688 0.750
115 13,700 7/16-20 0.453 2.500 0.438 0.719 0.344 1.000 0.625 0.750 0.813155 18,500 1/2-20 0.561 2.813 0.500 0.813 0.406 1.188 0.703 0.875 0.938202 24,000 9/16-18 0.578 3.125 0.563 0.922 0.453 1.375 0.769 1.000 1.063247 29,500 5/8-18 0.640 3.375 0.625 1.032 0.516 1.500 0.875 1.125 1.188430 42,000 3/4-16 0.766 4.125 0.750 1.250 0.656 1.938 1.063 1.375 1.438580 58,000 7/8-14 0.891 4.875 0.875 1.500 0.781 2.313 1.250 1.625 1.688780 76,000 1-12 1.016 5.750 1.000 1.750 0.906 2.688 1.438 1.875 1.938
15For inquiries call: (800) 922-1650 or email: [email protected]
QUICK DISCONNECTS
Quick Disconnect
A
G
D
MS20663
BM2258Bell-Memphis Part Number
DASH NO. CABLE DIA. MAX. LOAD A D G MS20663-
2 1/16 480 1-5/32 5/16 27/64 C2
3 3/32 920 1-3/8 3/8 33/64 C3
4 1/8 2,000 1-11/16 1/2 43/64 C4
5 5/32 2,800 2-3/16 1/2 51/64 C5
6 3/16 4,200 2-5/16 21/32 7/8 C6
7 7/32 5,600 3-3/16 7/8 1 9/64 C7
8 1/4 7,000 3-3/16 7/8 1 9/64 C8
Our manufacturing capabilities consist of CNC Swiss
screw machines, Y-axis lathes, 4-axis vertical machin-
ing centers, thread roller machines, centerless grinders,
four-slide wire forming, broaching, laser marking, in-
house passivation, bead blasting, and annealing.
16 Visit our website at: WWW.BELLMEMPHIS.COM
SWAGE TERMINALS
Plain Ball
Cylindrical Terminal
BM2487Bell-Memphis Part Number
NAS494 & BACT14B
BM2488Bell-Memphis Part Number
BACT14A
DASH NO. CABLE DIA. ØA ØB C D E MIN. BREAKING STRENGTH
-2 1/16 0.210 0.075 0.139 0.021 0.078 385
-3 3/32 0.286 0.104 0.172 0.036 0.094 735
-4 1/8 0.353 0.141 0.187 0.036 0.137 1,200
-5 5/32 0.427 0.173 0.225 0.036 0.165 1,680
-6 3/16 0.495 0.205 0.261 0.036 0.192 2,520
C
ØAØB
E
D D
L
ØA
ØN
ØT
BEFORE SWAGING15° +- 1/2°
DASH NO. CABLE DIA. ØA L ØN ØT MIN. BREAKING STRENGTH
A2 1/16 0.219 0.219 0.075 0.187 480
A3 3/32 0.250 0.328 0.105 0.215 920
A4 1/8 0.296 0.411 0.144 0.248 2,000
A5 5/32 0.375 0.505 0.175 0.310 2,800
A6 3/16 0.437 0.630 0.205 0.373 4,200
17For inquiries call: (800) 922-1650 or email: [email protected]
SWAGE TERMINALS
Strap, Eye, Terminal
Strap, Fork, Terminal
H
G
L
J
A
ØC
H
G
L
J
A
ØC
NAS1435EMilitary Standard
BM2482
NAS1435KMilitary Standard
BM2500
MIL-DTL-781Procurement Specification
MIL-DTL-781Procurement Specification
PART NUMBER, STRAP EYE END CABLE DIA.
FOR USE WITHMS20664 A (REF) ØC G RAD. H DIA. J L MIN.
WEIGHT (APPROX.)
NAS1435E2 .063 -21.0941.031
0.1920.188
0.1930.183
0.3800.370
0.1610.151
0.203 0.007
NAS1435E3 .094 -31.531 1.469
0.1920.188
0.224 0.214
0.4430.433
0.2240.214
0.266 0.015
NAS1435E4 .125 -41.6561.594
0.1920.188
0.2550.245
0.5050.495
0.2550.245
0.328 0.034
NAS1435E5 .156 -52.0001.937
0.2540.250
0.2860.276
0.5680.558
0.2860.276
0.406 0.046
NAS1435E6 .188 -62.2192.156
0.3170.313
0.3490.339
0.6930.683
0.3180.308
0.469 0.079
NAS1435E8 .250 -83.0312.969
0.3790.375
0.4420.432
0.8800.870
0.4420.432
0.594 0.168
PART NUMBER, STRAP EYE END CABLE DIA.
FOR USE WITHMS20664 A (REF) ØC G RAD. H DIA. J L MIN.
WEIGHT (APPROX.)
NAS1435K2 .063 -21.0941.031
0.1920.188
0.1930.183
0.3800.370
0.1610.151
0.203 0.007
NAS1435K3 .094 -31.531 1.469
0.1920.188
0.224 0.214
0.4430.433
0.2240.214
0.266 0.015
NAS1435K4 .125 -41.6561.594
0.1920.188
0.2550.245
0.5050.495
0.2550.245
0.328 0.034
NAS1435K5 .156 -52.0001.937
0.2540.250
0.2860.276
0.5680.558
0.2860.276
0.406 0.046
NAS1435K6 .188 -62.2192.156
0.3170.313
0.3490.339
0.6930.683
0.3180.308
0.469 0.079
NAS1435K8 .250 -83.0312.969
0.3790.375
0.4420.432
0.8800.870
0.4420.432
0.594 0.168
18 Visit our website at: WWW.BELLMEMPHIS.COM
SWAGE TERMINALS
Terminal, Chain to Cable
Terminal, Chain to Turnbuckle
L
ØDØA
ØU
J
L
F
YØD
ØC
ØU
J
NAS287Military Standard
NAS288Military Standard
DASH NO. CABLE DIA. ØA ØD J L ØU
25-2 1/16 0.160 0.094 0.186 1.350 0.23025-3 3/32 0.218 0.215 0.190 1.580 0.23035-4 1/8 0.250 0.144 0.293 1.950 0.34041-4 1/8 0.250 0.144 0.355 1.950 0.41040-6 3/16 0.359 0.159 0.436 2.430 0.50050-8 1/4 0.454 0.203 0.540 3.050 0.620
N50-8 1/4 0.494 0.203 0.415 3.150 0.560
DASH NO.MIN. STR
TERMTHREAD UNF-3A ØC ØD
F RADIUS REF. J L ØU Y
25 1,600 10-32 0.133 0.094 0.150 0.186 1.600 0.230 0.50035 2,200 1/4-28 0.155 0.144 0.150 0.293 1.700 0.340 0.60041 2,200 1/4-28 0.155 0.144 0.200 0.355 1.700 0.410 0.60040 4,600 5/16-24 0.243 0.159 0.200 0.436 1.900 0.500 0.75050 8,000 3/8-24 0.306 0.203 0.250 0.540 2.900 0.620 0.900
N50 8,000 3/8-24 0.306 0.203 0.300 0.415 2.900 0.560 0.900
MIL-DTL-8878Procurement Specification
MIL-DTL-781Procurement Specification
19For inquiries call: (800) 922-1650 or email: [email protected]
PRODUCT LISTINGAN Parts
AN115 Shackle, Wire Rope AN130 AssemblyAN135 AssemblyAN140 AssemblyAN145 AssemblyAN146 AssemblyAN147 AssemblyAN150 AssemblyAN155 Body, TurnbuckleAN161 Fork, TurnbuckleAN162 Fork for bearing, Turnbuckle AN165 Eye for Pin, TurnbuckleAN170 Eye for Cable, TurnbuckleAN490 Rod End-ThreadedAN665 Threaded Clevis Type Tie Rod TerminalAN669 Terminal, Wire Rope Stud
BAC Parts
BACC15AJ Clip, Locking for TurnbuckleBACR24R Clevis, Rod End, Forged SSBACR31A Rod EndBACT14 Terminals
BM Parts
BM2258 Quick DisconnectBM2487 Plain BallBM2488 Cylindrical TerminalBM2490 Ball End, Wire Rope, Single Shank 3/8” Cable
LS Parts
LS10404 TerminalLS10405 TerminalLS10945 TerminalLS10946 TerminalLS10966 TerminalLS10967 TerminalLS12912 Bearing End, TurnbuckleLS13109 AdapterLS15830 Control Rod, Clevis
LS15850 Control Rod, ClevisLS1641 AdapterLS1644 AdapterLS1645 AdapterLS1646 AdapterLS1647 AdapterLS1648 AdapterLS35396 Terminal, Chain to TurnbuckleLS9060 TerminalLS9118 Terminal, Chain to TurnbuckleLS9167 Rod
MS Parts
MS20115 Shackle, Wire RopeMS20658 Terminal, Wire Rope, Fork EndMS20663 Ball End, Wire Rope, Double Shank MS20664 Ball End, Wire Rope, Single ShankMS20667 Terminal, Wire Rope, Swaging Fork EndMS20668 Terminal, Wire Rope, Swaging, Eye EndMS21251 Body (Steel), Turnbuckle, Clip Locking MS21252 Clevis End, Turnbuckle, Clip LockingMS21253 Clevis End, (for Bearing), Turnbuckle, Clip LockingMS21254 Eye End, (for Pin), Turnbuckle, Clip LockingMS21255 Eye End, (for Wire Rope), Turnbuckle, Clip LockingMS21256 Turnbuckle, Locking ClipMS21259 Terminal, Wire Rope, StudMS21260 Terminal, Wire Rope, Stud, Clip LockingMS27975 Clevis, Rod End, Adjustable ForksMS27976 Clevis, Rod End, PlainMS51844 Sleeve, Swaging Wire Rope
NAS Parts
NAS1435E Strap, Eye, TerminalNAS1435k Strap, Fork, TerminalNAS170 Forged Clevis, Control Rod, AdjustableNAS287 Chain to Cable TerminalNAS288 Chain to Turnbuckle TerminalNAS354 Rod, ControlNAS645 Fork, TurnbuckleNAS646 Fork for Bearing, TurnbuckleNAS648 Eye for Pin, TurnbuckleNAS649 Barrel, TurnbuckleNAS650
_______________________________
1650 Channel AvenueP.O. Box 13187Memphis, TN 38113phone: 901-947-1102fax: 901-774-6147telex: 534072_______________________________
www.BellMemphis.com