Brochure: Sitraffic smartGuard. The web-based mobile traffic control ...
Pre-formance e• Covers are reusable Premier system of protection for pre-fabricated systems....
6
A complete engineered pre-fabricated solution PRE-formance ™ Complete
Transcript of Pre-formance e• Covers are reusable Premier system of protection for pre-fabricated systems....
A complete engineered pre-fabricated solutionPre-formance™Complet
e
PRE-formance™Complete
Email: [email protected]
Pre-formance Complete delivers:• Lower total cost of ownership• Skill set allocation to match job requirements• Elimination of unproductive and expensive spot buying• Elimination of job site material “piles” and inefficient searching for pieces and parts at the job site• Elimination of job site “engineering”• Reduction of overages and scrap, including expensive wire and cable
Safe, secure transmission of drawings to secure file exchange server, CDs, or hard copy drawings if customer prefers, where our technical team (consisting of engineers and former contractors) completes a preliminary take-off analysis.
A clearly defined, mutually agreed upon scope of work proposal easily identifies inclusions and exclusions and includes formal approval/sign-off procedures to ensure a clear, mutual understanding before work begins. Our team of engineers provides technical support and will answer your questions throughout the entire process. Mutual understanding of the requirements is an integral part of the process.
Customer focused, customer driven!
Ideal for hotels, condos, commercial and retail offices, hospitals and apartments
The most complete turnkey solution for commercial construction projects. The process begins with your architectural/engineering drawings and ends with a delivered complete pre-fabricated branch wiring system: custom made, packaged and delivered to your exact specifi cations. The entire process is designed with your project's specifi c requirements, and ease of fi eld installation, in mind.
Cooper Crouse-Hinds PRE-formance Complete
PRE-formance™Complete
43
Innovative products to ease installation and improve job site efficiency
Adjustable plaster (mud) ringsAdjustable plaster rings can be used with 4" square boxes and fits a range of drywall thicknesses.
Single gang plaster ring is provided with 5/8" raise and can be adjusted to 1-1/2" raise.
The plaster ring can be adjusted after sheet rock, mud or tile is installed without removing the wiring devices. The adjustable ring helps assure the finished installation meets specification requirements.
PRE-formance can be supplied with any MC type or EMT to meet customer requirements and specifications. Units arrive pre-wired to exact specifications—ready for final installation.
Wiring
Fittings and ConnectorsCooper Crouse-Hinds' wide selection of UL and cUL approved fittings and connectors provides secure termination of conductors to the box. The wide selection offers various materials and styles to match customer preferences and requirements.
Patented adjustable mud ring provides job site flexibility and ensures proper installation of devices in walls.
Unique Open Back Boxes maximize working area to reduce wiring time and eliminate interference problems. Eliminates the need for disassembly at the job site. Available in 4" square or 4-11/16".
Patent Pending Mounting Bracket offers unmatched flexibility: use with EMT or AC direct mounted to a stud, between studs, or as a floor mounted kick-in bracket that's flexible to accommodate different mounting location and height requirements.
Uni-Mount™ covers provide a secure box support and a built-in plaster ring which can be field assembled with outlet box for power applications. The rigid bracket design eliminates the need for far-side support and guide tabs ensure alignment on studs.
PRE-formance™Complete
4 Email: [email protected]
SmartGuard™ Protective Plates
MetalGuard™ heavy duty metallic protect plates• Metal protection for the most extreme environments• Heavy duty construction provides mechanical protection to box and wiring, and speeds up trim process• For use over a device (switch, receptacle, etc.) simply flip cover over and attach with screw• Covers are reusable
Premier system of protection for pre-fabricated systems.
SmartGuard provides:
• Patented clear protect plate system• Quick & easy visual identification of devices• Quick & easy visual identification of ground orientation• Quick identification of wire colors• Router resistant• Keeps paint and mud out• Simple, tool-less installation and removal speeds up trim stage
Innovative products to protect the installation—in metallic or non-metallic to meet customer preference and job specification requirements
Avoid messy installations.
Guard your wiring work and your electrical boxes from sheetrock mud, sanding dust, and paint overspray.
Clean Installation.
A solid fit ensures that the covers snap in quickly during rough-in and remove easily.
Router Resistant.
Normal router use will not chew or ruin the covers.
PRE-formance™Complete
Email: [email protected]
• Job specific labeling included with every cable run indicates starting position, ending position, device type, mounting type, cable size, cable length, box type, cable path, drawing number and date
Product receipt and installation made fast, easy and accurate!
• Unique, custom data layout table gets applied and shipped to each CAD drawing for each and every different room or area type
• Simplifies installation, eliminates guess work and helps eliminate job-site engineering
Technical support is available during the entire process to meet your complete pre-fabricated project requirements for ease of field installation. Contact us toll free at 866-764-5454 or email to [email protected]
PRE-formance provides the most complete turnkey solution for commercial construction projects, delivering material savings, labor savings and most importantly gives you the flexibility to control and allocate your labor force to meet job deadlines. The entire PRE-formance process is designed with your project's specific requirements and ease of field installation in mind.
Printed in USA4913-0508
Your Authorized Cooper Crouse-Hinds Distributor is:
Cooper Industries, Ltd.600 Travis, Ste. 5800Houston, TX 77002-1001P: 713-209-8400www.cooperindustries.com
www.crouse-hinds.comCooper Crouse-Hinds is a trademark of Cooper Industries, Inc.©2008 Cooper Industries, Inc.
U.S. (Global Headquarters):Cooper Crouse-HindsWolf & Seventh North StreetsSyracuse, NY 13221(866) 764-5454FAX: (315) 477-5179 FAX Orders Only: (866) [email protected]
Canada:Cooper Crouse-Hinds CanadaToll Free: 800-265-0502FAX: (800) 263-9504FAX Orders only: (866) 653-0645
Mexico/Latin America/Caribbean:Cooper Crouse-Hinds, S.A. de C.V.52-555-804-4000FAX: [email protected]
Europe (Germany):Cooper Crouse-Hinds GmbH49 (0) 6271 806-50049 (0) 6271 [email protected]
China:Cooper Crouse-Hinds Pte. Ltd.86-21-2899-3600FAX: [email protected]
India:Cooper Crouse-Hinds India91-22-6504-5150FAX: 91-22-2404-1811
Middle East (Dubai):Cooper Crouse-Hinds LLC971-4324-1578FAX: 971-4324-1640
Korea:Cooper Crouse-Hinds Korea82-2-3484-678382-2-3484-6778
Singapore:Cooper Crouse-Hinds Pte. Ltd.65-6297-4849FAX: [email protected]
Australia:Cooper Electrical Australia61-2-8787-2777FAX: [email protected]
For more information:If further assistance is required, please contact an authorized Cooper Crouse-Hinds Distributor, Sales Office or Customer Service Department:
