PRE ENGINEERED - Pillar Enterprises LTD - Since 1995...
Transcript of PRE ENGINEERED - Pillar Enterprises LTD - Since 1995...
![Page 1: PRE ENGINEERED - Pillar Enterprises LTD - Since 1995 ...pillarentltd.com/sites/pillarentltd.com/files/CSI...Under Continuous Evaluation by CSI 100% American made red iron buildings](https://reader034.fdocuments.in/reader034/viewer/2022051801/5ae42cf67f8b9a90138e9546/html5/thumbnails/1.jpg)
PRE ENGINEERED
STEEL BUILDINGS
![Page 2: PRE ENGINEERED - Pillar Enterprises LTD - Since 1995 ...pillarentltd.com/sites/pillarentltd.com/files/CSI...Under Continuous Evaluation by CSI 100% American made red iron buildings](https://reader034.fdocuments.in/reader034/viewer/2022051801/5ae42cf67f8b9a90138e9546/html5/thumbnails/2.jpg)
About Capital Steel
CSI approved dealer contractors have completed our thorough dealer application process in order to become an approved and authorized Capital Steel contractor. Thousands of general contractors have applied to become part of our network but only a limited number of qualifed contractors are awarded.
Capital Steel Industries (CSI) has been a leading steel building supplier with a proven track record of successfully completed projects throughout North America and abroad for over a decade. At Captial Steel we have built this track record by establishing a local presence across the United States through our national network of experienced contractors and by supplying only the highest strength and highest quality steel buildings available.
CSI approved contractors are authorized to supply our brand fo steel buildings under the CSI brand and seal as well as to provide construction services to our customers.
Licensed
Extensive Background Check
Minimum 3-5 Years Ownership
Extensive Construction Background
Local to the Area
Financially Capable
Capable of Completing Your Project
Purchasing a new steel building and who you trust to successfully complete your construction project is a serious decision.You should never settle for anything less than the best building available and a CSI contractor who will be dedicated to your project. When you choose Capital Steel, our team will make sure your project is a true success. Under Continuous Evaluation by CSI
![Page 3: PRE ENGINEERED - Pillar Enterprises LTD - Since 1995 ...pillarentltd.com/sites/pillarentltd.com/files/CSI...Under Continuous Evaluation by CSI 100% American made red iron buildings](https://reader034.fdocuments.in/reader034/viewer/2022051801/5ae42cf67f8b9a90138e9546/html5/thumbnails/3.jpg)
100% American made red iron buildings
50 year warranty standard
40 year paint warranty standard
Engineer certified anchor bolt plans
Engineer certified drawings
All plates are high P.S.I. strength
Frames are submerged arc welded
Standard A-325 structural bolts
All components are pre-punched
Clear span up to 300’
Designed for easy future expansion
Low lifetime maintenance quality steel
All buildings are non-combustible
Custom eave heights available
Solid built-up main frame construction
Deluxe architectural trim packages
Designed for fast ecomonical erection
Fast convenient delivery
Only through a certified Capital Steel Industries contractor are you assured delivery of the highest quality American made red iron steel building. The following quality standards set our buildings apart.
MADE IN AMERICAWhether we are going to ship a steel building to a project destination in North America or to a job site internationally, Capital Steel buildings are custom fabricated each time in the United States at one of fourteen locations. Capital Steel buildings are fabricated domestically using only the highest strength as well as premium quality steel. The Capital Steel brand is recognized for this uncompromising quality standard.
QUALITY STANDARDS
![Page 4: PRE ENGINEERED - Pillar Enterprises LTD - Since 1995 ...pillarentltd.com/sites/pillarentltd.com/files/CSI...Under Continuous Evaluation by CSI 100% American made red iron buildings](https://reader034.fdocuments.in/reader034/viewer/2022051801/5ae42cf67f8b9a90138e9546/html5/thumbnails/4.jpg)
PRIMARY FRAMING
SECONDARY FRAMING
Solid I-Beam Construction for Optimum Strength of Your BuildingBy using a higher yield strength material, a smaller web can be utilized which provides for a space saving design. Capital Steel building frames are single bead; continuous submerged arc welded by automatic welding machines (this helps insure quality control). A factory primer coat is applied to help protect the steel during the erection process.
End Wall Frames and ColumnsYour end wall frames and columns are either cold formed, mill-rolled or built-up “I” sections depending on your specific steel building design requirements.
Girts (in sidewall)Are 8.5” or 10” to meet design requirements, cold rolled Z-section, 13 to 16 ga. ASTM A-570, 50,000 or 55,0000 p.s.i. yield material is used to provide maximum strength. Bypass girt system overlaps at sidewall columns forming a continuous “beam” for extra strength.
Purlins (in roof)Are 8”, 10”, or 12” to meet design requirements. In Capital Steel buildings your purlins are top-mounted on the rafter with a varied lap of 2’to 6’ for strength and cost savings in erection labor. Maximum purlin spacing is 5’ on center. Purlins also use a bypass system.
Eave StrutIs a cold-formed C-Section that is rolled for the appropriate roof pitch to help insure that all Capital Steel buildings are weather-tight at the eave.
Sheeting AngleIs a continuous angle supplied for the attachment of the sheeting at the rake of the building for ease of installation of Capital Steel buildings.
Base AngleIs a continuous angle, supplied for the attachment of the base of the sheeting to the concrete. It is attached to the concrete with ram-sets or equivalent anchors by others.
BracingFor Capital Steel buildings either diagonal rod or cable bracing may be supplied for roof and walls to remove longitudinal load from the structure as needed.
Angle Flange BracingIs provided for the connection of the rigid frame to the purlins and girts. This ensures that allowable compression levels are adequate for any combination of loadings.
Purlin bridging angles may be provided at each mid-bay to assure consistent purlin spacing and stiffening.
![Page 5: PRE ENGINEERED - Pillar Enterprises LTD - Since 1995 ...pillarentltd.com/sites/pillarentltd.com/files/CSI...Under Continuous Evaluation by CSI 100% American made red iron buildings](https://reader034.fdocuments.in/reader034/viewer/2022051801/5ae42cf67f8b9a90138e9546/html5/thumbnails/5.jpg)
FASTENERS
SHEETING
Structural BoltsStructural bolts used with Capital Steel brand buildings meet requirements of ASTM standards.
ASTM Standards: A-325 for primary frame connections. A-307 for secondary framing.
Self Drilling and Self Tapping FastenersAre pre-assembled with neoprene washers and metal caps to help insure weather tightness of your steel building. This feature is one of many qualities that sets a steel building apart from traditional construction, steel buildings will not leak which prevents potential water damage.
80,000 p.s.i.80,000 p.s.i. yield material is standard on Capital Steel buildings. Some manufacturers use a lower yield strength material, which is less resistant to damage from hail and other impacts.
All Coil SteelAll Coil Steel with Galvalume coating standard (1.25oz - hot dipped) on each side helps prevent deterioration of the steel sheeting.
Deeper High RibDeeper High-Rib with more frequent corrugations, provides extra strength for the steel building.
Purlin Bearing RibThe purlin bearing rib provides a better weather tight seal between the roof sheets on your steel building.
Optimal Semi-Concealed Panel “Shadow Line”This configuration is available for walls, mansard systems, soffit material, etc. to add an aesthetic appeal to your Capital Steel building.
![Page 6: PRE ENGINEERED - Pillar Enterprises LTD - Since 1995 ...pillarentltd.com/sites/pillarentltd.com/files/CSI...Under Continuous Evaluation by CSI 100% American made red iron buildings](https://reader034.fdocuments.in/reader034/viewer/2022051801/5ae42cf67f8b9a90138e9546/html5/thumbnails/6.jpg)
SEALANTS | TRIM | FLASHING
RIDGE CAP
Anchor Bolt Setting PlanDemonstrates building reactions for all buildings with standard trim material for a finished look. This is also an additional deterrent to moisture, insects, and dirt getting into your building.
Engineer Certified Erection DrawingsIncluding wall and roof framing diagrams, cross sections, sheeting and flashing details are provided. These drawings show clearly the proper erection and assembly of all building components.
General Building ManualErection drawings provide step-by-step instruction for assembly of your building.
Part NumbersAre placed on each component (other than screws). These part numbers coincide with a detailed listing contained in the construction drawings and shipping list to help with assembly of the building.
Preformed High Rib Ridge Cap PanelMatches the slope and profile of adjoining roof panels on Capital Steel buildings to help insure constant alignment and weather tightness.
Long OverlapIs provided to help prevent water from siphoning into the building.
SealantsFor roof sidelaps, endlaps and flashing gable is provided to help insure weather tightness. Nominal 3/8” x 1/8” thick pressure sensitive tape sealant for ease of installation.
Trimming and FlashingTrimming at rake (gable) corners and eaves is provided for all Capital Steel buildings with standard trim material for a finished look. This is also a deterrent to moisture, insects, and dirt getting into the building.
PLANS & DRAWINGS
![Page 7: PRE ENGINEERED - Pillar Enterprises LTD - Since 1995 ...pillarentltd.com/sites/pillarentltd.com/files/CSI...Under Continuous Evaluation by CSI 100% American made red iron buildings](https://reader034.fdocuments.in/reader034/viewer/2022051801/5ae42cf67f8b9a90138e9546/html5/thumbnails/7.jpg)
RIGID FRAME BUILDINGS
Anchor bolts, foundation designs and erection are provided by others.
For purposes of quoting, the weights listed for each live load can be used for other building codes used in the United States, (i.e. BOCA, SBC, UBC etc.)
If you have any questions about whether these buildings can be utilized for your customer’s specific code requirements or if any adjustments are necessary please contact Capital Steel.
![Page 8: PRE ENGINEERED - Pillar Enterprises LTD - Since 1995 ...pillarentltd.com/sites/pillarentltd.com/files/CSI...Under Continuous Evaluation by CSI 100% American made red iron buildings](https://reader034.fdocuments.in/reader034/viewer/2022051801/5ae42cf67f8b9a90138e9546/html5/thumbnails/8.jpg)
FEATURES AND BENEFITS
01
02
03
04
05
High Strength
Economical
Easy Assembly
Efficient Design
Lasting Durability