ppt on LIFI TECHNOLOGY
-
Upload
tanshu-singh -
Category
Technology
-
view
49.412 -
download
83
description
Transcript of ppt on LIFI TECHNOLOGY
Page 2
Li-Fi can be thought of as a light-based Wi-Fi. That is, it uses light instead of radio waves to transmit information. And instead of Wi-Fi modems, Li-Fi would use transceiver-fitted LED lamps that can light a room as well as transmit and receive information.
Page 3
WHAT IS LI – FI ?
• LI-FI is transmission of data through illumination ,ie sending data through a LED light bulb that varies in intensity faster than human eye can follow
• LI FI- LIGHT FIDEALITY
Page 4
HISTORY-
The technology truly began during the 1990's in countries like Germany, Korea, and Japan where they discovered LED's could be retrofitted to send information. Harald Haas continues to wow the world with the potential to use light for communication
HARALD HASS
Page 5
on 12th July 2011. He used a table lamp with an LED bulb to transmit a video of blooming flowers that was then projected onto a screen behind him. During the event he periodically blocked the light from lamp to prove that the lamp was indeed the source of incoming data.
At TEDGlobal, Haas demonstrated a data rate of transmission of around 10Mbps -- comparable to a fairly good UK broadband connection. Two months later he achieved 123Mbps.
Back in 2011 German scientists succeeded in creating an800Mbps (Megabits per second) capable wireless network by using nothing more than normal red, blue, green and yellw 0
Page 7
PRESENT SCENARIO
1.4 Million 5 Billion
Radio Spectrum is congested but the demand for wireless data double each year .Every thing, it seems want to use wireless data but the capacity is drying up.
Page 11
Radio Waves
Infrared
Rays
Visible Rays
Ultraviolet Ray
s
X- Rays
Gama Ray
s
WHY ONLY VLC
Gama rays cant be used as they could be dangerous.X-rays have similar health issues.Ultraviolet light is good for place without people, but other wise dangerous for the human body.Infrared, due to eye safety regulation, can only bse used with low power.
HENCE WE LEFT WITH THE ONLY THE VISIBLE - LIGHT SPECTRUM.
Page 14
Basic concepts-LED ie Light emitting diode can be switched on and off faster since operating speed of LED is less than 1 μs, than the human eye can detect, causing the light source to be appear continuously. This invisible on-off activity enables a kind of data transmission using binary codes. Switching on and LED is a logical ‘1’, switching it off is a logical ‘0’.It is possible to encode data in the light by varying the rate at which LED’s flicker on and off to give different strings of 1s and 0s. Modulation is so fast that human eye doesn’t notice
Page 15
How LI-FI Works ? operational procedure is very simple, if the led is on, you transmit a digital 1, if its off you transmit a 0. The LEDs can be switched on and off very quickly, which gives nice opportunities for transmitting data. Hence all that us required is some LEDS and a controller that code data into those LEDs. We have to just vary the rate at which the LED’sflicker depending upon the data we want to encode
Thus every light source will works as a hub for data transmission
Page 19
Further enhancements can be made in this method, like using an array of LEDs for parallel data transmission, or using mixtures of red, green and blue LEDs to alter the light‘s frequency with each frequency encoding a different data channel. Such advancements promise a theoretical speed of 10 Gbps – meaning one can download a full high-definition film in just 30 seconds
Page 21
Giga shower GIGA MIMO
For giga-speed technologies, the Li-Fi Consortium defined GigaShower, GigaSpot and GigaMIMO models
Page 22
GigaShower and Giga-MIMO are the other models for in-house communication. There a transmitter or receiver is mounted into the ceiling connected to, for example, a media serverGigaShower provides unidirectional data services via several channels to multiple users with gigabit-class com-munication speed over several metres. This is like watching TV channels or listening to different radio stations where no uplink channel is needed. In case GigaShower is used to sell books, music or movies, the connected media server can be accessed via Wi-Fi to process payment via a mobile device. GigaSpot and GigaMIMO are optical wireless single- and multi-channel HotSpot solutions offering bidirectional gigabit-class communication in a room, hall or shopping mall for example.
Page 23
LI FI CONSTRUCTION-The LI FI product consists of 4 primary sub-assemblies:• Bulb• RF power amplifier circuit (PA)• Printed circuit board (PCB)• Enclosure
3-The PCB controls the electrical inputs and outputs of the lamp and houses the microcontroller used to manage different lamp functions.2- An RF (radio-frequency) signal is generated by the solid-state PA and is guided into an electric field about the bulb. The high concentration of energy in the electric field vaporizes the contents of the bulb to a plasma state at the bulb’s center; this controlled pasma generates an intense source of light. All of these subassemblies are contained in an aluminum enclosure.
Page 24
In bulb assembly a sealed bulb is embeded in a dielectric material,it is used as an electric field
concentrator that fouses energy in the bulb.the energy from E.F rapidly heats the material in the bulb to a
plasma state that emits light of high intensity and fullSpectrum
Page 27
POTENTIAL APPLICATION OF LI-FI
Li Fi technology is still in its infancy .However some areas where it seems perfectly applicable are:-
1- TRAFFIC LIGHTS Traffic lights can communicate to the car and with each other. Cars have LED-based headlights, LED-based cack lights, and cars can communicate with each other and prevent accidents in by exchanging information.
Page 29
2-INTRINSICALLY SAFE ENVIRONMENT
Visible Light is more safe than RF, hence it can be used in places where RF can't be used such as petrochemical plants .
Page 30
3- AirlinesWhenever we travel through airways we face the problem in communication media ,because the whole airways communication are performed on the basis of radio waves. To overcomes this drawback on radioways , li-fi is introduced.
Page 32
4- ON OCEAN BEDSLi-Fi can even wok underwater were Wi-Fi fails completely, thereby throwing open endless opportunities for military/navigation operations.
Page 33
There are millions of street lamps deployed around the world.Each of these street lamps could be a free access point.
PUBLIC INTERNET HOTSPOTS
Page 34
It will reduce your electricity billand maintainance bill
Page 35
Limitations 0r challenges-
# light can't pass through objects
#. Interferences from external light sources like sun light, normal bulbs, and opaque materials in the path of transmission will cause interruption in the communication.
#High installation cost of the VLC systems
#A major challenge facing Li-Fi is how the receiving device will transmit back to transmitter.
Page 36
CONCLUSION
The possibilities are numerous and can be explored further. If this technology can be put into practical use , every bulb can be used something like a Wi-Fi hotspots to transmit wireless data.
Page 37
REFRENCES
1..http://www.electronicsforu.com/electronicsforu/circuitarchives/view_article.asp?sno=778&title%20=%20Li-Fi%3A+A+New+Paradigm+in+Wireless+Communication&b_type=new&id=12042 2. http://en.wikipedia.org/wiki/Li-Fi 3. International Journal of advances in computing & communications, vol 1, 2013,page no-12www.ijacc.org