8/10/2019 Powerscreen Commander 1400 2 Deck Tech Spec Rev5!01!02-2013

1/10

PowerscreenCommander 14002 Deck Incline Screen

Specification - Rev 5. 01/01/2012

8/10/2019 Powerscreen Commander 1400 2 Deck Tech Spec Rev5!01!02-2013

2/10

8/10/2019 Powerscreen Commander 1400 2 Deck Tech Spec Rev5!01!02-2013

3/10

PowerscreenCommander 1400Specification - Rev 5. 01/01/2012

Page 3

Hopper & *rid

Target area: 4.85m (15 10) long x 1.85m (6) wide

Grid aperture: 102mm (4) std

Grid aperture: 152mm (6) option

Hopper capacity: 7.5m3(9.8 cu. yd.)

Adjustable angle tipping grid with integral loading

and wing plates

Feed in height: 3.87m (12 8) (side)

Feed in height: 4.18m (13 9) (DDVG side)

Belt Feeder

1050mm (42) 3 ply plain belt

Planetary gearbox direct drive system

Hydraulic variable speed control

4.11m (13 5) drum centres

350mm (13.5) drum diameter (drive)

320mm (12.5) drum diameter (tail)

4ain "onveyor

1050mm (42) 3 ply plain belt

Direct drive system

Fixed speed controlFully skirted & sealed

Hydraulic height adjustment

Anti roll back

13.37m (43 10) drum centres

262mm (10) drum diameter (drive)

262mm (10) drum diameter (tail)

8/10/2019 Powerscreen Commander 1400 2 Deck Tech Spec Rev5!01!02-2013

4/10

8/10/2019 Powerscreen Commander 1400 2 Deck Tech Spec Rev5!01!02-2013

5/10

PowerscreenCommander 1400Specification - Rev 5. 01/01/2012

Page 5

Transport

Wheels: 235 / 75 / R17.5 Dual

Axle: Approved braking axle

Suspension: Leaf spring suspensionBrakes: Airbrakes (ABS optional)

Mudguards: Plastic type

Lateral Protection: Optional extra

Lights: Optional extra

!ther !ptions

*rid

150mm (6) spacing grid

(ouble (eck )ibratin+ *rid

12ft 2 deck vibrating grid:

c/w radio control tipping

Bofor grid 90 - 110mm (3.75" - 4.25")

38mm (11/2") bottom deck mesh

Vertical hopper extensions c/w breaker bars:

500mm (20) & 700mm (28)

Vibrating grid discharge chutes

Crusher feed chute

Screenunit

Screen walkway & access ladder

Hydraulic screen tensioning

Quick release wedge screen tensioning

3inser

2 & 3 Deck rinser c/w catchbox:

1.5m x 3.7m (5 x 12) all decks

Side tensioned

2 Bearing

Grease filled

%n+ine

Tier 3 / Stage 3A

Deutz TCD2013 L04 2V - 4 cylinder turbo dieselengine developing 125 kW (168hp) @ 2200 rpm

Engines are available to meet both US EPS emission

standards, under CFR 1039, 625 and EU flexibility

provisions of Directive 97/68/EC

Shredder

Single shaft flail type shredder

Shredder is fitted with 12mm as standard or 24mm

blades as an option

8/10/2019 Powerscreen Commander 1400 2 Deck Tech Spec Rev5!01!02-2013

6/10

PowerscreenCommander 1400Specification - Rev 5. 01/01/2012

Page 6

Figure 1: Commander 1400 2 Deck WheelWorking Position

8/10/2019 Powerscreen Commander 1400 2 Deck Tech Spec Rev5!01!02-2013

7/10

PowerscreenCommander 1400Specification - Rev 5. 01/01/2012

Page 7

Figure 2: Commander 1400 2 Deck WheelTransport Position

8/10/2019 Powerscreen Commander 1400 2 Deck Tech Spec Rev5!01!02-2013

8/10

PowerscreenCommander 1400Specification - Rev 5. 01/01/2012

Page 8

Figure 3: Commander 1400 2 Deck WheelDouble Deck Vibrating Grid

Working Position

8/10/2019 Powerscreen Commander 1400 2 Deck Tech Spec Rev5!01!02-2013

9/10

PowerscreenCommander 1400Specification - Rev 5. 01/01/2012

Page 9

Figure 4: Commander 1400 2 Deck WheelDouble Deck Vibrating Grid

Transport Position

8/10/2019 Powerscreen Commander 1400 2 Deck Tech Spec Rev5!01!02-2013

10/10

PowerscreenCommander 1400Specification - Rev 5. 01/01/2012

Page 10

Terex GB Ltd.200 Coalisland Road

DungannonCo. Tyrone

Northern IrelandBT71 4DR

Tel: +44(0) 28 8774 0701Fax: +44(0) 28 8774 6569

E-Mail: sales@powerscreen.comWeb: www.powerscreen.com

Terex is a registered trademark of Terex Corporation in the United States of America and many other countries.Powerscreen is a registered trademark of Terex GB Ltdin the United States of America and many other countries.

Copyright Terex Corporation 2012.

2o$erscreen e5uip#ent co#plies $ith "% re5uire#ents6

Please consult Powerscreen if you have any other specific requirements in respect of guarding, noise or vibration levels, dustemissions, or any other factors relevant to health and safety measures or environmental protection needs. On receipt of specific

requests, we will endeavour to ascertain the need for additional equipment and, if appropriate, quote extra to contract prices.

All reasonable steps have been taken to ensure the accuracy of this publication, however due to a policy of continual product devel-opment we reserve the right to change specifications without notice.

It is the importers responsibility to check that all equipment supplied complies with locallegislation regulatory requirements.

Plant performance figures given in this brochure are for illustration purposes only and willvary depending upon various factors, including feed material gradings andcharacteristics. Information relating to capacity or performance contained within thispublication is not intended to be, nor will be, legally binding.