Powerprotection mani kumar
-
Upload
vinayvickky -
Category
Engineering
-
view
60 -
download
0
Transcript of Powerprotection mani kumar
03/05/2023 11:36:05 AM Power System Protection 1
A Seminar presentationon
Power system protectionpresented by
B.Mani kumar16705A0223
under the esteemed guidance of Mr. P. RAVNIDRA PRASAD M.Tech.,
Assistant Professor.
DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERINGANNAMACHARYA INSTITUTE OF TECHNOLOGY AND SCIENCE
(atonomous) NEW BOYANA PALLI, RAJAMPET – 516 126
2016-2019
03/05/2023 11:36:05 AM Power System Protection 2
03/05/2023 11:36:06 AM Power System Protection 3
Contents
• Introduction• Components• Protective Devices• Types of Protection• Coordination• Performance Measures
03/05/2023 11:36:06 AM Power System Protection 4
Introduction
• Power-system protection is a branch of electrical power engineering that deals with the protection of electrical power systems from faults through the isolation of faulted parts from the rest of the electrical network.
03/05/2023 11:36:06 AM Power System Protection 5
Components
Protection systems usually comprise five components:• Current and voltage transformers• Protective relays• Circuit breakers• Batteries• Fuses
03/05/2023 11:36:06 AM Power System Protection 6
Current & Voltage Transformer:
• Current & Voltage Transformer to step down the high voltages and currents of the electrical power system to convenient levels for the relay.
Current Transformer Voltage Transformer
03/05/2023 11:36:06 AM Power System Protection 7
Protective Relays& Circuit Breakers
• Protective Relays to sense the fault and initiate a trip, or disconnection.• Circuit Breakers to open/close the system based on
relay and auto reclose commands.
Digital Relay Circuit Breakers
03/05/2023 11:36:06 AM Power System Protection 8
Batteries& Fuses
• Batteries to provide power in case of power disconnection in the system.
• Fuses for parts of a distribution system, fuses are capable of both sensing and disconnecting faults
Batteries Fuses
03/05/2023 11:36:06 AM Power System Protection 9
Protective Devices
Functionality:• Automatic operation, such as auto-re-closing or
system restart• Monitoring equipment which collects data on the
system for post event analysis.
03/05/2023 11:36:06 AM Power System Protection 10
Parts of Protective Devices
There are three parts of protective devices:• Instrument transformer• Relay• Circuit Breaker
Inst Transformer Relay Circuit breaker
03/05/2023 11:36:06 AM Power System Protection 11
Advantages:
Major advantages of protective devices are:
• Safety• Economy• Accuracy
03/05/2023 11:36:06 AM Power System Protection 12
Types of Protection
There are several types of protection:• Over Load• High Voltage Transmission• Earth Fault• Back-Up
03/05/2023 11:36:06 AM Power System Protection
Overload &High Voltage Transmission:
• O L: Overload protection requires a current transformer which simply measures the current in a circuit• HVT:(Protection on the transmission and distribution
serves two functions) At a basic level, protection looks to disconnect equipment which experience an overload or a short to earth.
03/05/2023 11:36:06 AM Power System Protection 14
Earth Fault& Back-up
• Earth fault protection requires current transformers and senses an imbalance in a three-phase circuit
• Back-Up: The objective of protection is to remove only the affected portion of plant and nothing else
03/05/2023 11:36:06 AM Power System Protection 15
Coordination
• Protective device coordination is the process of determining the "best fit" timing of current interruption when abnormal electrical conditions occur. The goal is to minimize an outage to the greatest extent possible.
03/05/2023 11:36:06 AM Power System Protection 16
Performance Measures
We can measure a protection systems performance with following:• Reliability• Selectivity• Speed• Economy• Simplicity
03/05/2023 11:36:06 AM Power System Protection 17
03/05/2023 11:36:06 AM Power System Protection 18