Performance Max: The energized, productive, and energized remote worker.
PowerPoint ® Presentation Chapter 9 PLC and System Maintenance PLC System Maintenance PLC Hardware...
-
Upload
amber-wheeler -
Category
Documents
-
view
274 -
download
7
Transcript of PowerPoint ® Presentation Chapter 9 PLC and System Maintenance PLC System Maintenance PLC Hardware...
PowerPoint® Presentation
Chapter 9PLC and System Maintenance
Chapter 9PLC and System Maintenance
PLC System Maintenance • PLC Hardware Maintenance • Visual Inspections • Energized PLC
Maintenance • Battery Maintenance • PLC Software Maintenance • Equipment and Documentation
Verification • Software and Program Verification
Chapter 9 — PLC and System Maintenance
The maintenance of a PLC must be carefully documented for future reference.
Chapter 9 — PLC and System Maintenance
PLC maintenance is performed after the application is stopped and a lockout/tagout is applied.
Chapter 9 — PLC and System Maintenance
PLC hardware maintenance is work performed by a technician that consists of a visual inspection of a PLC, energized maintenance procedures, and battery maintenance.
Chapter 9 — PLC and System Maintenance
A visual inspection of a PLC and PLC-related components is part of PLC hardware maintenance.
Chapter 9 — PLC and System Maintenance
Proper personal protective equipment (PPE) must be used when performing energized maintenance on a PLC.
Chapter 9 — PLC and System Maintenance
Backup batteries for the CPU of a PLC can be behind the hinged door or cover of the CPU or mounted on the processor card.
Chapter 9 — PLC and System Maintenance
A PC, an interface cable, and sometimes an interface card are required to connect a PC to a PLC and use the PLC programming software.
Chapter 9 — PLC and System Maintenance
A documented program contains address descriptions, instruction comments, rung comments, and page titles.
Chapter 9 — PLC and System Maintenance
When connecting a PC to a PLC, the technician must be aware of certain technical issues and follow a series of steps.
Chapter 9 — PLC and System Maintenance
PLCs have electrically erasable programmable read-only memory (EEPROM) chips to provide a backup to RAM memory.