POWERFUL SEWER TOOLS · WG-1 & WGP-1 (Puller) 8-36” Lines. WG-1 Classic and the Maximum Puller...
Transcript of POWERFUL SEWER TOOLS · WG-1 & WGP-1 (Puller) 8-36” Lines. WG-1 Classic and the Maximum Puller...
POWERFUL & DURABLE SEWER TOOLS
THE INDUSTRY’S MOST
WVWT
WSWHP
WG
WD
WGP
WGR
CATALOG CONTENTS
2 1-970-259-2869 | WWW.SEWERNOZZLES.COM
WARTHOG SEWER TOOLS BY STONEAGESpecialists in high pressure waterblasting tools and equipment, our mission is to lead the world in providing innovative sewer cleaning tools and superior customer service.
OVER 60 DEALERS IN 20 COUNTRIES StoneAge authorized Warthog dealers are able to supply a complete range of high pressure pumps, systems and accessories.
WWW.SEWERNOZZLES.COM One of the most comprehensive websites in the industry. Featuring Tool Manuals, Jetting Charts, Service Videos and worldwide Dealer listings.
WWW.SEWERNOZZLES.COM | 1-970-259-2869
CATALOG CONTENTS
3
CATALOG CONTENTS
THE WARTHOG LINESECTIONS ARE COLOR-CODED BY PIPE SIZE AS SHOWN BELOW
WV-1/4 2-4” Lines. For cart and trailer jetters. New, high-speed rotation technology for small lines with light to moderate blockages. Pages 4-5.
WT-3/8-C 3-6” Lines. For cart and trailer jetters. Now standard with carbide buttons for longer head life. Pages 6-7.
2-6
”(5
1-1
52 m
m) PAGES 4-7SMALL LINES
MANHOLE CLEANER Our latest modification kit to convert your Warthog into an effective Manhole Cleaner. Page 25.
CENTRALIZERS Several different styles available including multi-wheeled models for cleaning extra large pipes. Page 25.
HYDRO-X Hydro-Excavation provides safe access to buried utilities by potholing or trenching with high pressure water. Page 24.
PAGES 25-27
PAGE 24
ACCESSORIES
HYDRO EXCAVATION
WS-1/2 4-8” Lines. For trailer jetters. Sold with a 2 ft. whip hose standard. Also jointed and rigid models, plus inlet options. Pages 8-9
WH-1/2 6-18” Lines. For trailer jetters with 1/2” and 3/4” inlet options, both inlets available in NPT or BSPP. Pages 10-11.
WHP-3/4 6-18” Lines. Maximum Puller WHP-3/4. Designed for more pulling power. Pages 12-13.
4-1
8”
(102-4
57 m
m)
MEDIUM LINES PAGES 8-17
8-3
6”
(203
-914
mm
)M
AX
IMIZ
E
YO
UR
WA
RTH
OG
LARGE LINES PAGES 18-23
WGR MAGNUM 6-36” Lines. Our newest Warthog. Built from the ground up. Effectively handles recycled water. Pages 16-17.
WG-1 & WGP-1 (Puller) 8-36” Lines. WG-1 Classic and the Maximum Puller WGP-1. Designed for more pulling power. Pages 18-21.
WD 1-1/4 8-36” Lines. For Municipal jetters. This is a high flow model with up to 120 gpm (450 lpm) flows. Pages 22-23.
NEW
!
1-970-259-2869 | WWW.SEWERNOZZLES.COM4
2”-4” Lines with ElbowsThe WV-1/4 uses StoneAge’s flow-through technology and features a revolutionary high-speed rotatating design with no high pressure seals or bearings to service. It cleans lines as small as 2” with long sweeping elbows. The head design also features permanent, pre-drilled orifices, rather than threaded nozzles.
The tool operates from 2-5k psi (140-350 bar) and 3-8 gpm (11-30 l/min). It has a 1/4” NPT pipe thread inlet and if a 1/4” NPT hose fitting is used the tool can pass through long radius elbows in 2” and larger lines. There are no maintenance or overhaul kits due to the low maintenance design.
PART NUMBER FRONT JET BACK JETS FLOW
WV-1/4-A .024 in. .6 mm 2 x .052 in. 1.3 mm 7-8 gpm 26-30 l/min
WV-1/4-B .020 in. .5 mm 2 x .039 in. 1.0 mm 5-6 gpm 15-23 l/min
WV-1/4-C .018 in. .45 mm 2 x .032 in. .8 mm 4-4.5 gpm 15-17 l/min
WV-1/4-D .018 in. .45 mm 2 x .028 in. .7 mm 3-3.5 gpm 11-13 l/min
WV-1/4 TOOL HEAD OPTIONS
WV-1/4
2”-4” Lines (51-102 mm)
Up to 5k psi (350 bar)
3-8 gpm Flows (11-30 l/min)
High-Speed Rotation
2”-4” LINES
Maximum Pressure 5k psi 350 bar
Operating Pressure 2-5k psi 140-350 bar
Flow 3-8 gpm 11.4-30.3 l/min
Flow Rating 0.8 Cv
Pulling Force 4-9 lb 40 N
Inlet Connection 1/4 NPT or BSPP
Tool Diameter 1.3 in. 33 mm
Length 2.0 in. 51 mm
Nozzle Ports 3 Drilled
Weight Complete 0.45 lb 0.20 kg
WV-1/4 SPECSNOW RATED UP TO 5000 PSI (350 BAR)
THE WV-1/4’S PATENTED HIGH-SPEED ROTATION COMBINED WITH LOW MAINTENANCE CREATES A POWERFUL TOOL FOR 2”-4” LINES.
WWW.SEWERNOZZLES.COM | 1-970-259-2869 5
Exploded View - Part Names and Numbers
WV 040*Head
WV 003Body
WV 001Shaft
WV 010Retaining Ring
WV 002-P4* Inlet Nut
WV 008O-Ring
*See charts on the opposite page for inlet nut and head options.This is a low-maintenance tool. There are no maintenance or overhaul kits. However, the WV 612 tool kit is available for easy tool disassembly.
2”-4” LINES
Stinger not in use here.Tool is backing out of
the pipe.
SM
ALL L
INE
S
If any Warthog is being used in pipes larger than the recommended diameter, a rigid stinger should be installed between the tool inlet and the hose end. Otherwise the tool can turn around inside the line (as shown here) and come back toward the operator, causing serious injury or death.
CORRECTThis is an example of WV-1/4 set up for correct usage in pipes
larger than 4” in diameter. A rigid stinger should be installed
between the tool inlet and the hose end. This helps to prevent
the tool from turning around inside of the pipe and coming back
toward the operator.
1-970-259-2869 | WWW.SEWERNOZZLES.COM6 1-866-795-1586 | WWW.SEWERNOZZLES.COM
3”-6” LINES
3”-6” Lines with ElbowsOur smaller Classic series WARTHOG models can negotiate elbows and clean-outs commonly found in laterals at homes, buildings, restaurants and other light commercial facilities. This tool is most commonly used on small capacity pumps and cart jetters. Also an excellent choice for cutting roots, clearing ice and removing blockages. The WT-3/8-C is designed specifically to handle 3”-6” lines and clean-outs.
Pipes made of cast iron and those that have sand or silt can act as abrasive agents that can aggressively wear out the tool. We’ve added permanent carbide buttons to the WT-3/8-C to increase head life. Our carbide buttons are available in all offsets and add up to 5 times the life compared to previous WT-3/8 models. It also features replaceable AP2 nozzles.
WT-3/8-C
3”-6” Lines (76-152 mm)
Up to 5k psi (350 bar)
5-12 gpm Flows (20-45 l/min)
Classic Workhorse Model
Maximum Pressure 5k psi 350 bar
Operating Pressure 1500-5k psi 100-350 bar
Rotation Speed 300-500 rpm
Flow 5-12 gpm 20-45 l/min
Flow Rating 0.75 Cv
Pulling Force 5-20 lb 22-90 N
Inlet Connection 3/8 NPT or BSPP
Tool Diameter 1.9 in. 48 mm
Length 3.0 in. 76 mm
Nozzle Ports 3 x 1/8 NPT
Weight Complete 1.2 lb .54 kg
WT-3/8-C SPECS
WT-3/8-C WITH EXTENDED-LIFE CARBIDE BUTTONS, STANDARD ON EVERY MODEL.
WWW.SEWERNOZZLES.COM | 1-970-259-2869 7
3”-6” LINES
Exploded View - Part Names and Numbers
WT 008O-Ring
WT 033Retaining Ring
WT 007Bearings
WT 010Shaft Seal
WT 032 Retaining Ring
WT 001 Shaft
WT 002 Sleeve
WT 014 Wave Spring
RJ 012-KTO HP Seal
RJ 011-KBrass Seat
WT 040-R60 orWT 040-R31 Head
BJ 026Port Plug
WT 030 O-Ring
WT 050Carbide Buttons
WT 006Shaft Seal
AP2Nozzles (3)
SM
ALL L
INE
S
WT 600 - SERVICE KIT1 BC 410 Syringe Assembly1 BJ 026 Port Plug1 BJ 048-S Visc. Fluid Slow, 6oz.1 BJ 062-S Antiseize, 2g1 GP 025-P2 Hex Socket Plug1 RJ 011-K Brass Seat 1 RJ 012-KTO HP Seal & O-Ring1 WT 014 Wave Spring
WT 602 - SEAL KIT1 RJ 011-K Brass Seat 1 RJ 012-KTO HP Seal & O-Ring1 WT 014 Wave Spring
WT 610 - OVERHAUL KIT1 BJ 026 Port Plug 1 BJ 048-S Visc. Fluid Slow, 6oz.1 RJ 011-K Brass Seat1 RJ 012-KTO HP Seal & O-Ring1 WT 006 Seal2 WT 007 Bearing, Ball 1 WT 008 O-Ring1 WT 010 Seal1 WT 014 Wave Spring1 WT 032 Retaining Ring1 WT 030 O-Ring
WT 612 - TOOL KIT 1 BA 100 Retaining Ring Pliers1 WT 105 Tool
MAINTENANCE & OVERHAUL KITS
JETTING CHARTS FOR CUSTOMIZING THIS SEWER TOOL ARE AVAILABLE BY VISITINGJETTING.SEWERNOZZLES.COM
OR GIVE US A CALL AT 1-970-259-2869
1-970-259-2869 | WWW.SEWERNOZZLES.COM8
4”-8” LINES
4”-8” LinesThe WS-1/2 is designed to handle 4”-8” lines and is most commonly used with trailer jetters. It is used to clean lines in restaurants, hospitals, multi-story apartment buildings, residential, and other applications. Easily removes grease, cut roots, ice and soil blockages.
OPTIONAL RIGID INLETSThe WS-P8 is excellent for straight pipes. The whip hose is removed, allowing the hose to connect directly to the tool. Available with a female 1/2” NPT or BSPP connection. In this configuration 4” 90˚ bends are no longer negotiable.
WS-1/2
4”-8” Lines (102-204 mm)
Up to 5k psi (350 bar)
8-20 gpm Flows (30-76 l/min)
3 Models Available
We now offer an optional 35 ft. hose with a 1/2” NPT inlet. WS 020-35
Maximum Pressure 5k psi 350 bar
Operating Pressure 1500-5k psi 100-350 bar
Rotation Speed 200-500 rpm
Flow 8-20 gpm 30-76 l/min
Flow Rating 1.3 Cv
Pulling Force 9-27 lb 40-120 N
Inlet Connection 1/2 NPT & BSPP
Tool Diameter 1.9 in. 48 mm
Length 4.4 in. 112 mm
Nozzle Ports 3 x 1/8 NPT
Weight Complete 2.95 lb 1.33 kg
WS-1/2 SPECS
JOINTED AND RIGID WS-1/2 MODELS ARE AVAILABLE WITH OR WITHOUT A WHIP HOSE.
JOINTED INLET MODELSThis model allows the inlet hose to bend to the side, shortening the rigid length of the tool and allowing limited access applications to be cleaned much easier. 1/2” NPT or BSPP inlet ports available.
Optional Descaling Headfor the WS Line of Tools
WS 040-DS
WWW.SEWERNOZZLES.COM | 1-970-259-2869 9
4”-8” LINES
WS 020Hose
WS 203Nipple
RJ 008O-Ring
WS 210O-Ring
WS 201Nut
WS 208O-Ring
WS 210O-Ring
Inlet Area PartsWS-1/2-J WS-P8
Inlet Area Parts
RJ 008O-Ring
WS 010Seal
WS 002-P8Inlet Nut
Exploded View - Part Names and Numbers
WS 029Shaft Seal
TJ 007Bearings
WS 001Shaft
RJ 012-TOHP Seal
RJ 011Seat
WS 080 Centralizer
WS 003Body
WS 010 Shaft Seal
BJ 026 Port Plug
WS 040Head
AP2Nozzles (3)
WS 020-2 Hose Assembly
WS 021-S Weep Seal
RJ 008 O-Ring
WS 002 Inlet Nut
WS 202 Face
WS 600 -SERVICE KIT 1 BC 410 Syringe Assembly1 BJ 048-S Visc. Fluid, 6oz.1 BJ 062-S Antiseize, 2g1 GP 025-P2 Hex Socket Plug1 RJ 011 Brass Seat 1 RJ 012-TO HP Seal & O-Ring
WS 610 -OVERHAUL KIT1 BJ 026 Port Plug 1 BJ 048-S Visc. Fluid, 6oz.1 BJ 062-S Antiseize, 2g1 RJ 008 O-Ring1 RJ 011 Brass Seat1 RJ 012-TO HP Seal & O-Ring3 TJ 007 Ball Bearings 1 WS 010 Small Seal 1 WS 021-S Weep Seal 1 WS 029 Large Seal
WS 610-J -OVERHAUL KIT1 BJ 026 Port Plug 1 BJ 048-S Visc. Fluid, 6oz.1 BJ 062-S Antiseize, 2g1 RJ 008 O-Ring1 RJ 011 Brass Seat1 RJ 012-TO HP Seal & O-Ring3 TJ 007 Ball Bearings 1 WS 010 Small Seal 1 WS 029 Large Seal1 WS 208 O-Ring2 WS 210 O-RingsWS 612 -Tool Kit 1 TJ 064 Fill Tube1 WS 105 Tool
WS 602 -SEAL KIT 1 RJ 011 Brass Seal1 RJ 012-TO HP Seal & O-Ring
MAINTENANCE & OVERHAUL KITS
ME
DIU
M L
INE
S
1-970-259-2869 | WWW.SEWERNOZZLES.COM10
6”-18” LINES
6”-18” LinesThe WH-1/2 and the WH-3/4 are the same tool offered with different inlet ports, either 1⁄2” or 3⁄4” NPT or BSPP. The WH models are best for 6”-18” lines (152-457 mm).
These tools are most commonly used with small capacity combination trucks and large trailer jetters. Descaling Heads are available for both models.
WH-1/2 & 3/4
6”-18” Lines (152-457 mm)
Up to 8k psi (550 bar)
10-45 gpm Flows (40-170 l/min)
2 Inlet Options
Maximum Pressure 8k psi 550 bar
Operating Pressure 1500-8k psi 100-550 bar
Rotation Speed 150-300 rpm
Flow 10-50 gpm 40-170 l/min
Flow Rating 3.0 Cv
Pulling Force 18-50 lb 80-220 N
Inlet Connection 1/2 NPT or BSPP & 3/4 NPT or BSPP
Length 7.5 in. 191 mm
Diameter Incl. Cent. 3.4 in. 86 mm
Nozzle Ports 3 x 1/8 NPT
Weight Complete 4.7 lb 2.1 kg
WH-1/2 & WH-3/4 SPECS
THE WH IS TOOL OF CHOICE FOR SMALLER MUNICIPAL LINES AND LARGER RESIDENTIAL LINES.
Optional Descaling Headfor the WH-1/2 & WH-3/4
WH 040-DS
Exploded View - Part Names and Numbers
WWW.SEWERNOZZLES.COM | 1-970-259-2869 11
6”-18” LINES
MAINTENANCE & OVERHAUL KITS
WH 600 - SERVICE KIT1 BJ 048-F Viscous Fluid Fast, 6oz.1 BJ 062-S Antiseize, 2g1 GP 025-P2 Hex Socket Plug1 TJ 011 Brass Seat 1 WH 012-O HP Seal & O-Ring
WH 602 - SEAL KIT 1 TJ 011 Brass Seat WH 012-O HP Seal & O-Ring
WH 610 - OVERHAUL KIT1 BJ 048-F Viscous Fluid Fast, 6oz.1 BJ 062-S Antiseize, 2g1 RJ 008 O-Ring1 TJ 011 Brass Seat1 WH 012-O HP Seal & O-Ring2 TJ 007 Ball Bearing 2 WH 010 Shaft Seal 1 RJ 021-S Weep Seal 1 RJ 014 Wave Spring
WH 612 - TOOL KIT 1 TJ 064 Fill Tube1 WH 105 Tool
ME
DIU
M L
INE
S
RJ 014Wave Spring
RJ 021-S Weep Seal
WH 002-P12 or WH 002-P8 Inlet
Nut
RJ 008O-Ring
WHP 032Retaining Ring
WH 010 Shaft Seal
WH 012HP Seal
WH 080-4Centralizer
TJ 011Seat
WH 040Head
WH 003Body
WH 010Shaft Seal
TJ 007Bearing
WH 001Shaft
TJ 007Bearing
AP2 Nozzle (3)
JETTING CHARTS FOR CUSTOMIZING THIS SEWER TOOL ARE AVAILABLE BY VISITINGJETTING.SEWERNOZZLES.COM
OR GIVE US A CALL AT 1-970-259-2869
1-970-259-2869 | WWW.SEWERNOZZLES.COM12
6”-18” Lines with ElbowsThe WHP-3/4 has been designed to produce more pulling power than other tools available on the market. The centralizer fins are streamlined to allow the rear facing jets to be angled more sharply, giving the tool more forward thrust. The result is more pulling power to handle longer lines and moderate inclines.
The WHP-3/4 features 3 nozzle ports, including a boring jet offset at 15 degrees, and 2 jets at 162 degrees. The inlet port comes in either 3/4” NPT or BSPP.
Maximum Pressure 8k psi 550 bar
Operating Pressure 1500-4k psi 100-275 bar
Rotation Speed 150-300 rpm
Flow 15-50 gpm 60-190 l/min
Flow Rating 3.0 Cv
Pulling Force 45-90 lb 200-400 Nm
Inlet Port1/2 NPT, 1/2 BSPP, 3/4 NPT, 3/4 BSPP
Diameter Including Centralizer
3.4 in. 86 mm
Length 7.5 in. 190 mm
Nozzle Ports 3 x 1/8 NPT
Weight Complete 4.7 lb 2.1 kg
WHP-3/4 SPECS
WHP-3/4
6”-18” Lines (152-457 mm)
Up to 8k psi (550 bar)
15-50 gpm Flows (60-190 l/min)
6”-18” LINES
Up to 40% More Thrust*
* With the front jet plugged.
THE WHP-3/4 IS EXCELLENT FOR LONGER LINES AND MODERATE INCLINES.
WWW.SEWERNOZZLES.COM | 1-970-259-2869 13
6”-18” LINES
Exploded View - Part Names and Numbers
MAINTENANCE & OVERHAUL KITS
WH 600 - SERVICE KIT1 BJ 048-F Viscous Fluid Fast, 6oz.1 BJ 062-S Antiseize, 2g1 GP 025-P2 Hex Socket Plug1 TJ 011 Brass Seat 1 WH 012-O HP Seal & O-Ring
WH 602 - SEAL KIT 1 TJ 011 Brass Seat WH 012-O HP Seal & O-Ring
WH 610 - OVERHAUL KIT1 BJ 048-F Viscous Fluid Fast, 6oz.1 BJ 062-S Antiseize, 2g1 RJ 008 O-Ring1 TJ 011 Brass Seat1 WH 012-O HP Seal & O-Ring2 TJ 007 Ball Bearing 2 WH 010 Shaft Seal 1 RJ 021-S Weep Seal 1 RJ 014 Wave Spring1 WHP 032
WH 612 - TOOL KIT 1 TJ 064 Fill Tube1 WH 105 Tool
WH 003Body
RJ 021-S Weep Seal
WH 102-P12, WH 102-P8WH 102-BSPP or
WH 102-BSPP8 Inlet Nut
RJ 008O-Ring
WHP 080 Centralizer
WHP 032Retaining Ring
WHP 040-R5 Head
WH 010Shaft Seal
WH 010Shaft Seal
TJ 007Bearing
TJ 007Bearing
WH 001Shaft
AP2Nozzle (3)
RJ 014Wave Spring
WH 012HP Seal
TJ 011Seat M
ED
IUM
LIN
ES
JETTING CHARTS FOR CUSTOMIZING THIS SEWER TOOL ARE AVAILABLE BY VISITINGJETTING.SEWERNOZZLES.COM
OR GIVE US A CALL AT 1-970-259-2869
1-970-259-2869 | WWW.SEWERNOZZLES.COM14
NEW!
Extended tool durability.The WGR MAGNUM is the first tool in the Warthog Magnum series, specifically designed for extended tool durability and optimal handling of dirty or recycled water.
• Optimized speed control extends maintenance intervals
• Latest seal technology effectively handles dirty or recycled water for improved performance
• Flush style head protects front shaft seals for longer tool life
• Streamlined design keeps tool from catching inside pipe
• Carbide nozzles generate higher quality jets
• Descaling ports now come standard
• Hardened steel centralizer with 4x longer life
• Optional fin sizes for different pipe diameters
• Independently replaceable fins can be easily replaced as wear occurs without opening tool body
• Choose your rotation speed with 3 viscous fluid options
WARTHOGWGR MAGNUM
WGR
6”-36” Lines (20-90 cm)
Up to 5k psi (350 bar)
50-80 gpm Flows (190-300 l/min)
Standard Descaler or Puller Descaler
HIGH PERFORMANCE LESS MAINTENANCELONGER LIFE
THE FIRST TOOL IN THE NEW WARTHOG MAGNUM SERIES
WGR SPECSMaximum Pressure 5k psi 350 bar
Operating Pressure 1500-5k psi 100-350 bar
Rotation Speed 150-300 rpm
Flow 50-80 gpm 190-300 l/min
Flow Rating 6 Cv
Inlet Connection 1 in. NPT or 1in. BSPP
Diameter 4.5 in. 114 mm
Length 10.25 in. 260 mm
Nozzle Ports 7 x 1/8 NPT
Weight Complete 13 lb 5.9 kg
8”-36” LINES
WWW.SEWERNOZZLES.COM | 1-970-259-2869 15
BJ 026Port Screw (2)
WGR 058-M90 Shaft HP Seal
WGR 030 Screw Torx Pan Head (6)
WGR 076 O-Ring
WGR 102Inlet Nut
WS 210 O-Ring
WGR 006 Shaft Seal
WGR 006 Shaft Seal
WG 008 O-Ring
WGR 052 Wave Spring
WGR 020 Back Plate
WGR 081Fin
WGR 059-M90 Nut HP Seal
WGR 007 Bearing
WGR 010 Shaft Seal
WGR 011 Seal Spacer
WG 014 Wave Spring
WGR 101 Shaft
WS 210 O-Ring
TR200 121 O-Ring
WGR 003Body
WGR 010 Shaft Seal
WGR 011 Seal Spacer
WGR 007 Bearing
WG 008 O-Ring
WGR 006 Shaft Seal
WGR 004 Front Nut
WGR 040 Head
CNP2 Nozzle (7)
GP 025-P2SS Hex Socket Plug (2)
WGR 601 - FLUID KIT1 WGR 601 Fluid Service Kit1 BC 410 Syringe2 BJ 026 Port Screw1 WGR 048 Visc Fluid, 6oz3 Viscous Fluid Options Available
WGR 602 - HP SEAL KIT1 BJ 062-S Antiseize, 2g2 WGR 052 HP Seal Wave Spring1 WGR 058 HP Seal - Shaft1 WGR 059 HP Seal - Nut2 WS 210 HP Seal O-Ring
WGR 610 - OVERHAUL KIT2 BJ 026 Port Screw1 BJ 062-S Antiseize, 2g1 GP 025-P2 Front Jet Plug1 TR200 121 Head - Shaft O-Ring1 WG 008 Nut O-Ring1 WG 014 Bearing Wave Spring2 WGR 006 Shaft Seal - Outer2 WGR 007 Bearing2 WGR 010 Shaft Seal - Inner2 WGR 011 Seal Spacer6 WGR 030 Torx Screws1 WGR 048 Visc Fluid, 6oz
2 WGR 052 HP Seal Wave Spring1 WGR 058 HP Seal - Shaft1 WGR 059 HP Seal - Nut1 WGR 076 Weep Seal O-Ring1 WGR 180 Torx L-Wrench2 WS 210 HP Seal O-Ring
WGR 612 - TOOL KIT1 WGR 180 Torx L-Wrench1 WGR 181 Removal Press Tube1 WGR 182 Installation Press Tube1 WGR 183 Hex Tool1WGR 184 HP Seal Install Tool
MAINTENANCE & OVERHAUL KITS
Exploded View - Part Names and Numbers
8”-36” LINES
16 1-970-259-2869 | WWW.SEWERNOZZLES.COM
8”-36” LINES
8”-36” LinesThe WG-1 model is used in municipal, industrial and commercial drain cleaning applications. By installing replaceable AP2 nozzle tips that are sized to maximize the efficiency and effectiveness of your pump, these tools are highly productive. This tool is predominately used in large combination trucks with 1” hose.
WG-1 CLASSIC
8”-36” Lines (203-914 mm)
Up to 5k psi (350 bar)
50-80 gpm Flows (190-300 l/min)
Classic WG-1 Model
MODEL WG-1 CLASSIC
Maximum Pressure 5k psi 350 bar
Operating Pressure 1500-5k psi 100-350 bar
Rotation Speed 150-300 rpm
Flow 50-80 gpm 190-300 l/min
Flow Rating 4.6 Cv
Pulling Force 70-100 lb 310-450 Nm
Inlet Connection 1 NPT or BSPP
Length 9.1 in. 231 mm
Diameter Incl. Cent. 4.8 in. 122 mm
Nozzle Ports 5 x 1/8 NPT
Weight Complete 10.9 lb 4.9 kg
WG-1 CLASSIC SPECS
OUR CLASSIC WG-1 MODEL IS A MUNICIPAL WORKHORSE.
Optional Descaling Headfor the WG-1.
WG 040-DS-R5
WWW.SEWERNOZZLES.COM | 1-970-259-2869 17
8”-36” LINES
WG 600 - SERVICE KIT 1 BJ 048-F Visc. Fluid Fast, 6oz.1 BJ 062-S Antiseize, 2g1 GP 025-P2 Hex Socket Plug 1 MJ 011 Brass Seat 1 HC 012-TO HP Seal & O-Ring
WG 610 - OVERHAUL KIT 2 BJ 010-D Shaft Seals 1 BJ 048-F Visc. Fluid Fast, 6oz.1 BJ 062-S Antiseize, 2g1 MJ 011 Brass Seat1 HC 012-TO HP Seal & O-Ring2 WG 007 Ball Bearings 1 WG 008 O-Ring 1 WG 014 Wave Spring1 MJ 021-S Weep Seal1 WGP 032 Retaining Ring
WG 612 - TOOL KIT 1 HC 064 Fill Tube1 BJ 105 Tool
WG 602 - SEAL KIT 1 MJ 011 Brass Seat 1 HC 012-TO HP Seal & O-Ring
MAINTENANCE & OVERHAUL KITS
Exploded View - Part Names and Numbers
WG 008O-Ring
MJ 011Brass Seat
HC 012-TOHP Seal
WG 080-3Centralizer
WG 014Wave Spring
MJ 021-SWeep Seal
WGP 032Retaining Ring
WG 102Inlet Nut
BJ 010-DShaft Seal
WG 040-R5Head
BJ 010-DShaft Seal
WG 001Shaft
WG 007Bearing
WG 007Bearing
WG 003Body
JETTING CHARTS FOR CUSTOMIZING THIS SEWER TOOL ARE AVAILABLE BY VISITINGJETTING.SEWERNOZZLES.COM
OR GIVE US A CALL AT 1-970-259-2869
AP2Nozzles (5)
LA
RG
E L
INE
S
1-970-259-2869 | WWW.SEWERNOZZLES.COM18
8”-36” LINES
Maximum Pulling PowerOur WGP-1 is designed to produce up to 40% more pulling power* than our WG-1. The rear facing jets are angled more sharply and the centralizer fins have been streamlined. The result is more pulling power to navigate longer lines and moderate inclines, plus makes retrieval of the tool easier.
WGP-1
8”-36” Lines (152-457 mm)
Up to 5k psi (350 bar)
50-80 gpm Flows (190-300 l/min)
Up to 40% More Thrust*
MODEL WGP-1
Maximum Pressure 5k psi 350 bar
Operating Pressure 1500-5k psi 100-350 bar
Rotation Speed 150-300 rpm
Flow 50-80 gpm 190-300 l/min
Flow Rating 4.6 Cv
Pulling Force 100-140 lb 450-623 N
Inlet Connection 1 NPT or BSPP
Length 9.1 in. 231 mm
Diameter Incl. Cent. 4.8 in. 122 mm
Ports 5 x 1/8 NPT
Weight Complete 10.9 lb 4.9 kg
WGP-1 SPECS
Optional Descaling Headfor the WGP-1
WGP 040-R8-DS
THE WGP-1 IS EXCELLENT FOR LONGER LINES AND MODERATE INCLINES.
* With the front jet plugged.
WWW.SEWERNOZZLES.COM | 1-970-259-2869 19
8”-36” LINES
WG 003Body
WGP 032Retaining Ring
MJ 021-SWeep Seal
WG 008O-Ring
WG 102Inlet Nut
Exploded View - Part Names and Numbers
LA
RG
E L
INE
S
WGP 080Centralizer
BJ 010-DShaft Seal
WG 007Bearing
WG 001Shaft
WG 007Bearing
WGP 040Head
AP2Nozzles
BJ 010-DShaft Seal
MJ 011Brass Seat
HC 012-TOHP Seal
WG 014Wave Spring
WG 600 - SERVICE KIT 1 BJ 048-F Visc. Fluid Fast, 6oz.1 BJ 062-S Antiseize, 2g1 GP 025-P2 Hex Socket Plug 1 MJ 011 Brass Seat 1 HC 012-TO HP Seal & O-Ring
WG 610 - OVERHAUL KIT 2 BJ 010-D Shaft Seals 1 BJ 048-F Visc. Fluid Fast, 6oz.1 BJ 062-S Antiseize, 2g1 MJ 011 Brass Seat1 HC 012-TO HP Seal & O-Ring2 WG 007 Ball Bearings 1 WG 008 O-Ring 1 WG 014 Wave Spring1 MJ 021-S Weep Seal1 WGP 032 Retaining Ring
WG 612 - TOOL KIT 1 HC 064 Fill Tube1 BJ 105 Tool
WG 602 - SEAL KIT 1 MJ 011 Brass Seat 1 HC 012-TO HP Seal & O-Ring
MAINTENANCE & OVERHAUL KITS
JETTING CHARTS FOR CUSTOMIZING THIS SEWER TOOL ARE AVAILABLE BY VISITINGJETTING.SEWERNOZZLES.COM
OR GIVE US A CALL AT 1-970-259-2869
1-970-259-2869 | WWW.SEWERNOZZLES.COM20
8”-36” LINES
MODEL WD 1-1/4
Maximum Pressure 5k psi 350 bar
Operating Pressure 1500-5k psi 100-350 bar
Rotation Speed 150-300 rpm
Flow 80-120 gpm 300-450 l/min
Flow Rating 7.6 Cv
Pulling Force 130-190 lb 600-850 Nm
Inlet Connection 1-1/4 NPT or BSPP
Length 9.1 in. 231 mm
Diameter Incl. Cent. 4.8 in. 122 mm
Nozzle Ports 7 x 1/8 NPT
Weight Complete 11 lb 5.0 kg
WD 1-1/4 SPECS
High Flow Model For 8”-36” LinesThe WD 1-1/4 is designed to handle the same applications as the WG-1 but at higher flows. The 1-1/4” inlet combined with seven ports effectively distribute more water.
Descaling heads are not available for this model.
WD 1-1/4
8”-36” Lines (152-457 mm)
Up to 5k psi (350 bar)
80-120 gpm Flows (300-450 l/min)
High Flow Model
WD 1-1/4 WITH TWO EXTRA NOZZLE PORTS AND HIGH FLOW CAPACITY.
WWW.SEWERNOZZLES.COM | 1-970-259-2869 21
8”-36” LINES
WD 600 - SERVICE KIT 1 BJ 048-F Viscous Fluid Fast, 6oz.1 BJ 062-S Antiseize, 2g1 GP 025-P2 Hex Socket Plug1 BJ 211 Brass Seat 1 BJ 212-O HP Seal & O-Ring
WD 602 - SEAL KIT 1 BJ 211 Brass Seat 1 BJ 012-O HP Seal & O-Ring
WD 610 - OVERHAUL KIT 1 BJ 048-F Viscous Fluid Fast, 6oz.2 BJ 010-D Shaft Seals1 BJ 062-S Antiseize, 2g1 BJ 211 Brass Seat1 BJ 012-O HP Seal & O-Ring2 WG 007 Ball Bearings 1 WD 021 Seal 1 WG 008 O-Ring 1 WG 014 Wave Spring
WG 612 - TOOL KIT 1 HC 064 Fill Tube1 BJ 105 Tool
MAINTENANCE & OVERHAUL KITS
Exploded View - Part Names and Numbers
BJ 212-OHP Seal
BJ 211Brass Seat
WD 021Weep Seal
WD 002Inlet Nut
WG 080Centralizer
WG 014Wave Spring
BJ 010-DShaft Seal
WG 008O-Ring
WG 007Bearing
WD 040-R35Head
AP2Nozzles (7)
WG 003Body
BJ 010-DShaft Seal
WG 007Bearing
WD 001Shaft
LA
RG
E L
INE
S
JETTING CHARTS FOR CUSTOMIZING THIS SEWER TOOL ARE AVAILABLE BY VISITINGJETTING.SEWERNOZZLES.COM
OR GIVE US A CALL AT 1-970-259-2869
The included high visibility urethane guards are replaceable by removing three bolts. Hydro-Excavation provides a safe means to precisely excavate an area with high pressure water.
1-866-795-1586 | WWW.SEWERNOZZLES.COM22
Hydro Excavation ToolsSTONEAGE is proud to offer a new line of Hydro-Excavation jetting tools. Hydro-Excavation is a safe alternative for providing access to buried utilities by potholing or trenching with high pressure water. There are three options available for different applications. NOTE: Each of these assemblies are jetted to match your pumps pressure and flow. The Waterjet Technology Association recommends limiting the thrust on hand held jetting applications to no more than 1/3 of the operators weight. Contact our Customer Service Team for any jetting questions.
HX-101 - SINGLE HEAD ASSEMBLY This option provides a replaceable single OCIH 1/4” NPT carbide nozzle at 0°. Using a single nozzle allows all of your pump power to be directed in one direction for the most digging power. The high visibility urethane guard is replaceable by removing three bolts. The head has a 1/2” NPT inlet connection to attach to the operating wand.
HX-103S - TRIPLE STRAIGHT HEAD ASSEMBLY This option utilizes three CNP2 Carbide Attack Tips which are 1/8” NPT. This in-line pattern give operators the ability to jet with a wider spray pattern to trench material faster. The high visibility urethane guard is replaceable with three bolts. The head has a 1/2” NPT inlet connection to attach to the operating wand.
NEW HX-102 – DOUBLE HEAD ASSEMBLY This option utilizes two CNP2 Carbide Attack Tips which are 1/8” NPT. This jetting option divides your pump power into two jets for a wider jet pattern with less impact power than the HX-101 Assembly. The high visibility urethane guard is replaceable by removing three bolts. The head has a 1/2” NPT inlet connection to attach to the operation wand.
HX-200 - HYDRO-X LANCE ASSEMBLY Similar to the HX-101, this option uses a replaceable single OCIH 1/4 NPT carbide nozzle at 0°. However, this option includes a 60” lance which allows extra reach for digging deep, focused holes. This assembly includes a guard and collar system to protect the nozzle. The connecting point for this Lance is 1/2” NPT male.
HYDRO-XUp to 5k psi
Up to 12 gpm Flows
4 Options Available
1-970-259-2869 | WWW.SEWERNOZZLES.COM22
HYDRO EXCAVATIONH
YD
RO
EX
CAVA
TIO
N
WWW.SEWERNOZZLES.COM | 1-970-259-2869 23
ACCESSORIES
Maximize the cleaning effectiveness of Warthog sewer nozzles for specific job requirements. Ask our Account Representatives about configuration options and extensions.
Turn your Warthog pipe cleaning tool into an effective Manhole Cleaner The benefit of using this design is that the jets are directed at the manhole walls at all times which makes it much more effective and safer than 3D tools. The conversion is simple and requires exchanging the standard WG 040 head with our MANHOLE CLEANER head kits. The head conversion kits include a head with 1/2” extension arms and nozzles. Call our Customer Service team for kit options. We recommend the use of manhole cover plates for increased safety.
• WG 286-M-P16 - STRAIGHT PIPES13”-36” diameters (330-915 mm)
• WG 288-S-P16 - PIPES W/BENDS16.5”-22” diameters (420-560 mm)
• WG-085
6.85” DIAMETER
For 7” (178 mm) minimum pipe ID
• WG-070
Available in 6”, 8”, 10” & 12” interchangeable skid sizes. (152 mm, 203 mm, 254 mm & 305 mm)
AC
CE
SSO
RIE
S
1-970-259-2869 | WWW.SEWERNOZZLES.COM24
1. Acceptance of Terms and Conditions. These Terms and Conditions shall operate as Seller’s acceptance of Buyer’s purchase order, and such acceptance is made expressly conditional on assent by Buyer to the Terms and Conditions. Such assent shall be deemed to have been given unless written notice of objection to any of such Terms and Conditions (including inconsistencies between Buyer’s purchase order and this acceptance) is given by Buyer to Seller promptly on receipt hereof.
Seller desires to provide its Buyer with prompt and efficient service. However, to negotiate individually the terms of each sales contract would substantially impair Seller’s ability to provide such service. Accordingly, products furnished and services rendered by Seller are sold only on the Terms and Conditions stated herein. Notwithstanding any Terms or Conditions on Buyer’s order, Seller’s performance of any contract is expressly made conditional on Buyer’s agreement to Seller’s Terms and Conditions of sale unless otherwise specifically agreed to in writing by Seller. In the absence of such agreement, commencement of performance, shipment and/or delivery shall be for Buyer’s convenience only and shall not be deemed or construed to be an acceptance of Buyer’s Terms and Conditions.
PRODUCTS SOLD BY SELLER ARE DESIGNED AND INTENDED TO BE USED AT HIGH PRESSURES AND SPEEDS, AND MAY BE DANGEROUS IF OPERATED IMPROPERLY OR WITHOUT THE USE OF APPROPRIATE SAFETY DEVICES AND GUARDS. BUYER IS CAUTIONED TO CAREFULLY READ AND UNDERSTAND THESE TERMS AND CONDITIONS, AS THEY HAVE IMPORTANT LEGAL CONSEQUENCES.
2. Payment/Prices. Unless other arrangements have been made in writing between Seller and Buyer, payment for product delivered shall be made upon receipt of invoice. The prices shown on the face hereof are those currently in effect. Prices invoiced shall be per price list in effect at the time of shipment. Prices are subject to increase for inclusion of any and all taxes which are applicable and which arise from the sale, delivery or use of Seller’s products or services and for the collection of which Seller is or may be responsible to any governmental authority unless acceptable exemption certificates are provided by Buyer in accordance with law. Buyer shall pay all charges for transportation and delivery and all excise, order, occupation, use or similar taxes, duties, levies, charges or surcharges applicable to the equipment or services being purchased, whether now in effect or hereafter imposed by any governmental authority, foreign or domestic.
3. Warranty. Subject to the limitations and conditions hereinafter set forth, Seller warrants to the original Buyer that its products are free from defects in workmanship and material for a period of twelve (12) months from shipment. Seller’s obligation under this warranty shall be limited to repairing, replacing or issuing a credit for, at Seller’s option, any products or services it finds to be defective in material or workmanship. In no event shall Seller be liable for any incidental, consequential or indirect damages of any kind. THIS WARRANTY SHALL BE IN LIEU OF ANY OTHER WARRANTY, EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTY FOR MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. No statement or recommendation made by Seller or its representative to Buyer or User shall constitute a warranty by Seller or a waiver or modification to any of the provisions hereof or create any liability for Seller. All warranty claims are subject to the exclusions and limitations set forth below:
a. The warranty shall not apply if the product or service (1) has been subject to misuse, negligence or accident; (2) has not been installed or operated in accordance with Seller’s recommendations; (3) has been operated under more severe conditions than those specified for the particular product or service; (4) has been operated beyond the rated capacity of the product; or (5) has been repaired or altered outside Seller’s facilities or in any way so as, in Seller’s judgment, to affect its stability or reliability.
b. Products that Seller furnishes, but does not manufacture, carry only the warranty of the manufacturer of such products. Where other manufacturers’ or suppliers’ products used in Seller’s products or services prove defective, Seller’s liability shall exist only to the extent that Seller is able to recover from such manufacturers or suppliers for such defects.
c. Any warranty granted by Seller to the Buyer shall be deemed void if any goods covered by such warranty are used for any purpose not recommended or permitted. In addition, the Buyer shall indemnify Seller and hold Seller harmless from and against any and all claims, damages, losses, costs, expenses and other liability of whatever nature that Seller suffers or incurs by reason of any such unintended use.
d. Notice of defective product or service must be given in writing to Seller by Buyer or User within fifteen (15) business days following receipt of goods. Buyer or User shall keep such products or services in an unaltered condition for examination by Seller’s representative. No goods may be returned for credit or adjustment without prior written permission from Seller.
4. Product Liability. Buyer specifically acknowledges that the products being purchased may be operated at high speeds and/or pressures, and that as such they may be inherently dangerous if not used correctly. Buyer shall be solely responsible for the safe operation of the products at all times and for determining the safety devices and guards that may be required for the safe operation of the products. Buyer shall undertake to specify and order all safety devices and guards necessary for the safe operation of the equipment covered. All safety devices and guards offered in Seller’s quotations are recommended for purchase. Seller may provide necessary safety devices and guards not offered in this quotation at an extra price in accordance with the specifications of Buyer. Buyer shall at all times use and require its employees to use all necessary and appropriate safety devices, guards and proper safe operating procedures. Buyer shall not remove or modify any such devices, guards or warning signs and shall insist on safe operating practices on the part of its personnel. In no event shall Seller be responsible for any injuries to persons or property caused by defects in any equipment, including by way of illustration and not limitation, any pumps, compressors, fittings, connections, components, piping or hoses up to the point that same are connected to the product. Buyer agrees to indemnify and to save Seller harmless from any and all liability or obligation incurred by or against Seller, including costs and attorneys’ fees, to or by any persons injured directly or indirectly in the operation of the equipment furnished under the following conditions:
a. if Buyer fails to purchase and use necessary and appropriate safety devices and guards as determined and/or recommended by Seller;
b. if Buyer fails to maintain in good working order such safety devices and guards as are purchased from Seller;
TERMS AND CONDITIONS
TERMS AND CONDITIONS
WWW.SEWERNOZZLES.COM | 1-970-259-2869 25
c. if Buyer adds, omits, repairs, modifies, replaces or substitutes any components on the equipment without permission from Seller;
d. if Buyer exceeds at any time the maximum safe loads, pressures or speeds recommended by Seller for the equipment furnished hereunder without the specific written consent of Seller; or
e. if Buyer otherwise fails to operate the product or equipment in accordance with Seller’s printed instructions or otherwise negligently operates the equipment.
5. Delivery. Seller is not obligated to make delivery by a specified date, but will always use its best efforts to make delivery within the time requested. All deliveries are based on F.O.B. Seller’s factory, unless specifically agreed otherwise, and Buyer shall pay all shipping costs and insurance from that point. Seller, in its sole discretion, will determine and arrange the means and manner of transportation of the products. Responsibility of Seller shall cease and Buyer assumes all risk of loss or damages upon Seller’s delivery to and receipt by a common carrier. Carriers shall be responsible for goods lost or damaged in transit and Buyer shall immediately notify the carrier in writing of such loss or damage. At Buyer’s request Seller will offer its assistance.
THE PROPOSED SHIPMENT DATE IS AN ESTIMATE. UNDER NO CIRCUMSTANCES SHALL SELLER HAVE ANY LIABILITY WHATSOEVER FOR LOSS OF USE OR FOR ANY DIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM DELAY REGARDLESS OF THE REASON(S).
Shortages or errors must be reported within fifteen (15) business days from receipt of shipment to secure adjustment. No merchandise may be returned without securing written approval from Seller. Seller will notify Buyer promptly of any material delay and will specify the revised delivery date as soon as practicable. Seller shall not be liable for any delay in delivery or performance, or for any failure to manufacture, deliver or perform due to (a) any cause beyond its reasonable control; (b) any act of God, act of Buyer, act of civil or military authority, governmental priority, strike or other labor disturbance, flood, epidemic, war, riot, delay in transportation or car shortage; or (c) inability on account of any cause beyond the reasonable control of Seller to obtain necessary materials, components, services or facilities. In the event of any such delay, the date of delivery or of performance shall be extended for a period equal to the time lost by reason of the delay.
6. Technical Advice. All technical advice, recommendations and services of Seller are intended for use by persons having adequate skill, at their own risk, and Seller assumes no responsibility, and Buyer hereby waives all claims against Seller, for results obtained or damages incurred from the use of Seller’s advice, recommendations and services.
7. Modification. These Terms and Conditions are intended by Seller and Buyer to constitute a final, complete and exclusive expression of agreement and cannot be supplemented or amended without Seller’s prior written approval. Seller’s waiver of any breach, or failure to enforce any of the Terms and Conditions at any time, shall not in any way affect, limit or waive Seller’s right thereafter to enforce and compel strict compliance with every Term and Condition thereof. If any provisions
of these Terms and Conditions are held to be invalid or unenforceable, such invalidity or unenforceability shall not affect the validity or enforceability of the other portions hereof.
8. Disputes. Buyer and Seller shall attempt in good faith promptly to resolve any dispute arising under these Terms and Conditions by negotiations between representatives who have authority to settle the controversy. If unsuccessful, Buyer and Seller shall further attempt in good faith to settle the dispute by nonbinding third-party mediation, with fees and expenses of such mediation apportioned equally to each side. Any dispute not so resolved by negotiation or mediation may then be submitted to a court of competent jurisdiction in accordance with the terms hereof. These procedures are the exclusive procedures for the resolution of all such disputes between the parties.
All sales, agreements for sale, offers to sell, proposals, acknowledgments and contracts of sale, including, but not limited to, purchase orders accepted by Seller, shall be considered a contract under the laws of the State of Colorado and the rights and duties of all persons, and the construction and effect of all provisions hereof shall be governed by and construed according to the laws of such state. A state or federal court located within the State of Colorado shall have sole and exclusive jurisdiction over any litigation concerning any such matters as well as any alleged defects of any products or equipment covered thereby or damages sustained as a result of such alleged defects.
If any litigation is commenced between Seller and Buyer, or their personal representatives, concerning any provision hereof, the party prevailing in the litigation shall be entitled, in addition to such other relief that is granted, to a reasonable sum as and for their attorneys’ fees and costs in such litigation or arbitration.
STONEAGE TRADEMARK LISTView the list of StoneAge’s trademarks and service marks and learn how the trademarks should be used. Use of StoneAge trademarks may be prohibited, unless expressly authorized.
http://www.sewernozzles.com/trademark-list/
STONEAGE PATENT DATAView the list of StoneAge’s current U.S. patent numbers and descriptions.http://www.sapatents.com
TERMS AND CONDITIONS
Copyright 2014 • StoneAge Inc. All Rights Reserved.
1-970-259-2869 | WWW.SEWERNOZZLES.COM26
STONEAGE offers the products listed in this catalog through its dealer network only. For a list of our current dealers please visit WWW.SEWERNOZZLES.COM. Our Technical Support team is available during the hours listed above. They are also available for custom projects, see STONEAGE SOLUTIONS below.
OPERATOR’S MANUALS for all equipment are available online. They illustrate tools, identify parts, and detail maintenance and overhaul procedures. Additional copies of the manuals, repair videos and CD’s are available at a nominal charge.
REPAIR & MAINTENANCE SERVICE is available by the same technicians who build and test our tools. We try to complete repairs and test every tool within three days of receipt. Call first so we can record all the information necessary to begin work as soon as the tool arrives. Make sure you include contact information. Send tool to: STONEAGE INC. Attention Repairs, 466 S. Skylane Dr., Durango CO 81303, USA
SERIAL NUMBER DATABASE is maintained on all equipment sold. If a serial number is provided when ordering parts, we can verify that the right parts are specified.
PARTS AND SERVICE KITS are available to ship same day as ordered. Standard tools can usually be shipped the next day. Custom porting of heads usually requires 3-4 days to schedule through the factory. More complicated systems like Lancing Machines are built when ordered, which can take several weeks depending on factory backlog. Check availability and place orders early enough to avoid scheduling conflicts.
CALL OR EMAIL YOUR ORDER to an authorized dealer with purchase order number, shipping and billing addresses, and delivery date. Check datasheet to ensure specifications are complete. Advise whether we should hold shipment until all items are available.
SHIPPING IS PRE-PAID and invoiced with order but may be charged directly to the customer’s account with selected courier by special instruction. Most orders are shipped via UPS or Fed Ex couriers; specify a preference if you wish. Lancing Systems, Floor Cleaners, Telebooms and other large equipment must be shipped by truck or air freight. Either party may make the arrangements. Airline counter-to-counter delivery is not reliable from our mountain location.
MAJOR CREDIT CARDS OR BANK TRANSFERS ARE ACCEPTED. Pre-payment is required to ship custom equipment.
Any parts returned for credit or warranty must be accompanied by a StoneAge RMA number. Please contact a Customer Service Specialist to obtain an RMA number. A minimum restocking fee of 15% applies to standard items returned unused. Returns will only be accepted on unused items returned 6 months or less from invoice date. All returns and restocking fees are subject to StoneAge final decision. Returns of custom products and obsolete items are not accepted.
TECHNICAL SUPPORT
LEAD TIME
ORDERING
SHIPPING
PAYMENT
RETURNS
REPAIRS
MANUALS
1-866-795-1586 (TOLL FREE IN THE U.S.)PHONE: 970-259-2869 • EMAIL: [email protected]
HOURS: 8:00 AM - 5:00 PM MONDAY - FRIDAY (USA MOUNTAIN TIME)
CUSTOMER SERVICE
WWW.SEWERNOZZLES.COM | 1-970-259-2869 27
Jeff Daniel Kevin Alan Mike
SALES AND SHIPPING
Kent TimFrankValoreeCarrie
PRODUCTION, INVENTORY AND QUALITY CONTROL
Greg Eric Julz Bill
Chrissi Hugh Tom Jim
Derek Leighann Teri Charlie
David Deanna Ron Andy
MarkWill Chester BrianEd
INFORMATION SYSTEMS
Jed Jacob Jack Cody Jim
Keith David Virgil Tom Ted
Kevin Robbie
Kevin Patrick
LeeErick
EricEricJohn GregLynn
FABRICATION, ASSEMBLY AND REPAIR
Chris Margaret MikeRandyBill
MARKETING AND SOLUTIONS
THE STONEAGE TEAM
ADMINISTRATION
Janet
Sara
Maria
Carolyn
Brenda
Betsy
Amy
David
ENGINEERING
Travis
Rawlin
John
Todd
Joe
Doug
Colton Stirling
Jeff Rick
EXECUTIVES
John KP Jerry
UNITED STATES• Alabama• Arizona• Arkansas• California• Colorado• Connecticut• Delaware• Florida• Georgia• Idaho• Illinois• Indiana
• Iowa• Kansas• Kentucky• Louisiana• Maryland• Mass• Michigan• Minnesota• Mississippi• Missouri• Nebraska• New Jersey• New York
• North Carolina• Ohio• Oklahoma• Oregon• Pennsylvania• South Carolina• Texas• Utah• Virginia• Washington• Wisconsin
INTERNATIONAL• Africa• Austrailia• Canada• China• Denmark• France• Italy• Netherlands• New Zealand• Sweden• United Kingdom
Tools that WORK.Tools that LAST.
WWW.SEWERNOZZLES.COM
Proudly Manufactured
in the United States